The mixed signed bounds check really belongs into retrieve_ptr_limit()
instead of outside of it in adjust_ptr_min_max_vals(). The reason is
that this check is not tied to PTR_TO_MAP_VALUE only, but to all pointer
types that we handle in retrieve_ptr_limit() and given errors from the latter
propagate back to adjust_ptr_min_max_vals() and lead to rejection of the
program, it's a better place to reside to avoid anything slipping through
for future types. The reason why we must reject such off_reg is that we
otherwise would not be able to derive a mask, see details in 9d7eceede7
("bpf: restrict unknown scalars of mixed signed bounds for unprivileged").
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Small refactor to drag off_reg into sanitize_ptr_alu(), so we later on can
use off_reg for generalizing some of the checks for all pointer types.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
We forbid adding unknown scalars with mixed signed bounds due to the
spectre v1 masking mitigation. Hence this also needs bypass_spec_v1
flag instead of allow_ptr_leaks.
Fixes: 2c78ee898d ("bpf: Implement CAP_BPF")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Expose EEE Tx and Rx low power idle counters via ethtool
A EEE TX or RX LPI event occurs when the transmitter or the receiver
enters EEE (IEEE802.3az) LPI state.
ethtool --statistics <iface>
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The i225 device offers a number of special PTP Hardware Clock features on
the Software Defined Pins (SDPs) - much like i210, which is used as
inspiration for this patch. It enables two possible functions, namely
time stamping external events and periodic output signals.
The assignment of PHC functions to the four SDP can be freely chosen by
the user.
For the external events time stamping, when the SDP (configured as input
by user) level changes, an interrupt is generated and the kernel
Precision Time Protocol (PTP) is informed.
For the periodic output signals, the i225 is configured to generate them
(so the SDP level will change periodically) and the driver also has to
keep updating the time of the next level change. However, this work is
not necessary for some frequencies as the i225 takes care of them
(namely, anything with a half-cycle of 500ms, 250ms, 125ms or < 70ms).
While i225 allows up to four timers to be used to source the time used
on the external events or output signals, this patch uses only one of
those timers. Main reason is to keep it simple, as it's not clear how
these extra timers would be exposed to users. Note that currently a NIC
can expose a single PTP device.
Signed-off-by: Ederson de Souza <ederson.desouza@intel.com>
Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The i225 device can produce one interrupt on the full second, much
like i210 - from where this patch is inspired.
This patch sets up the full second interruption on the i225 and when
receiving it, it sends a PPS event to PTP (Precision Time Protocol)
kernel subsystem.
The PTP subsystem exposes the PPS events via ioctl and sysfs, and one
can use the `testptp` tool (tools/testing/selftests/ptp) to check that
the events are being generated.
Signed-off-by: Ederson de Souza <ederson.desouza@intel.com>
Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add new function which checks MTA_REGISTER if its filled correctly.
If not then writes again to same register.
There is possibility that i210 and i211 could not accept
MTA_REGISTER settings, specially when you add and remove
many of multicast addresses in short time.
Without this patch there is possibility that multicast settings will be
not always set correctly in hardware.
Signed-off-by: Grzegorz Siwik <grzegorz.siwik@intel.com>
Tested-by: Dave Switzer <david.switzer@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add ts_format to 'Common Config' section of the TX/RX devlink reporters
diagnostics info. Possible values for ts_format: 'RT' or 'FRC'
which stands for: Real Time and Free Running Counters correspondingly.
Signed-off-by: Aya Levin <ayal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Wrap 1PPS initialization in a helper for a cleaner init flow.
Signed-off-by: Aya Levin <ayal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
In case the interface was set up but cannot establish the link, ethtool
will print more information to help the user troubleshoot the state.
For example, no link due to missing cable:
$ ethtool eth1
...
Link detected: no (No cable)
Beside the general extended state, drivers can pass additional
information about the link state using the sub-state field. For example:
$ ethtool eth1
...
Link detected: no (Autoneg, No partner detected)
The extended state is available only for specific cases, in other cases
ethtool with print only "Link detected: no" as before
Signed-off-by: Moshe Tal <moshet@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Add needed structure layouts and defines for pddr register
(Port Diagnostics Database Register) and the troublshooting page.
This will be used to get extended link state from the monitor opcode
bits.
Signed-off-by: Moshe Tal <moshet@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
The bulk size is larger than 16K so use kvzalloc().
The bulk bitmask upper size limit is 16K so use kvcalloc().
Signed-off-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
mlx5e_safe_switch_channels accepts new_chs as a parameter and opens new
channels in place, then copying them to priv->channels. It requires all
the callers to allocate space for this temporary storage of the new
channels.
This commit cleans up the API by replacing new_chs with new_params, a
meaningful subset of new_chs to be filled by the caller. The temporary
space for the new channels is allocated inside mlx5e_safe_switch_params
(a new name for mlx5e_safe_switch_channels). An extra copy of params is
made, but since it's control flow, it's not critical.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
This commit extends mlx5e_safe_switch_channels() to support on-the-fly
configuration changes, when the channels are open, but don't need to be
recreated. Such flows exist when a parameter being changed doesn't
affect how the queues are created, or when the queues can be modified
while remaining active.
Before this commit, such flows were handled as special cases on the
caller site. This commit adds this functionality to
mlx5e_safe_switch_channels(), allowing the caller to pass a boolean
indicating whether it's required to recreate the channels or it's
allowed to skip it. The logic of switching channel parameters is now
completely encapsulated into mlx5e_safe_switch_channels().
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
This commit uses new functionality of mlx5e_safe_switch_channels
introduced by the previous commit to reduce the amount of repeating
similar code all over the driver.
It's very common in mlx5e to call mlx5e_safe_switch_channels when the
channels are open, but assign parameters and run hardware commands
manually when the channels are closed.
After the previous commit it's no longer needed to do such manual things
every time, so this commit removes unneeded code and relies on the new
functionality of mlx5e_safe_switch_channels. Some of the places are
refactored and simplified, where more complex flows are used to change
configuration on the fly, without recreating the channels (the logic is
rewritten in a more robust way, with a reset required by default and a
list of exceptions).
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
mlx5e_safe_switch_channels is used to modify channel parameters and/or
hardware configuration in a safe way, so that if anything goes wrong,
everything reverts to the old configuration and remains in a consistent
state.
However, this function only works when the channels are open. When the
caller needs to modify some parameters, first it has to check that the
channels are open, otherwise it has to assign parameters directly, and
such boilerplate repeats in many different places.
This commit prepares for the refactoring of such places by allowing
mlx5e_safe_switch_channels to work when the channels are closed. In this
case it will assign the new parameters and run the preactivate hook.
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
When the TLS logic finds a tcp seq match for a kTLS RX resync
request, it calls the driver callback function mlx5e_ktls_resync()
to handle it and communicate it to the device.
Errors might occur during mlx5e_ktls_resync(), however, they are not
reported to the stack. Moreover, there is no error handling in the
stack for these errors.
In this patch, the driver obtains responsibility on errors handling,
adding queue and retry mechanisms to these resyncs.
We maintain a linked list of resync matches, and try posting them
to the async ICOSQ in the NAPI context.
Only possible failure that demands driver handling is ICOSQ being full.
By relying on the NAPI mechanism, we make sure that the entries in list
will be handled when ICOSQ completions arrive and make some room
available.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
When TLS is supported, WQE ctrl segment of every transmitted packet
is updated with the (possibly empty, for non-TLS packets) TISN field.
Take this one-liner function into the header file and inline it,
to save the overhead of a function call per packet.
While here, remove unused function parameter.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
When TLS is supported and enabled, every transmitted packet is tested
to identify if TLS offload is required.
Take the early-return condition into an inline function, to save
the overhead of a function call for non-TLS packets.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Socket parameter is not used in accel_rule_init(), remove it.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Maintaining an SQ state bit to indicate TLS support
has no real need, a simple and fast test [1] for the SKB is
almost equally good.
[1] !skb->sk || !tls_is_sk_tx_device_offloaded(skb->sk)
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
We need to store cmlen instead of len in cm->cmsg_len.
Fixes: 38ebcf5096 ("scm: optimize put_cmsg()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
i210 has a total of 24KB of transmit packet buffer. When in Qav mode,
this buffer is divided into four pieces, one for each Tx queue.
Currently, 8KB are given to each of the two SR queues and 4KB are given
to each of the two SP queues.
However, it was noticed that such distribution can make best effort
traffic (which would usually go to the SP queues when Qav is enabled, as
the SR queues would be used by ETF or CBS qdiscs for TSN-aware traffic)
perform poorly. Using iperf3 to measure, one could see the performance
of best effort traffic drop by nearly a third (from 935Mbps to 578Mbps),
with no TSN traffic competing.
This patch redistributes the 24KB to each queue equally: 6KB each. On
tests, there was no notable performance reduction of best effort traffic
performance when there was no TSN traffic competing.
Below, more details about the data collected:
All experiments were run using the following qdisc setup:
qdisc taprio 100: root refcnt 9 tc 4 map 3 3 3 2 3 0 0 3 3 3 3 3 3 3 3 3
queues offset 0 count 1 offset 1 count 1 offset 2 count 1 offset 3 count 1
clockid TAI base-time 0 cycle-time 10000000 cycle-time-extension 0
index 0 cmd S gatemask 0xf interval 10000000
qdisc etf 8045: parent 100:1 clockid TAI delta 1000000 offload on
deadline_mode off skip_sock_check off
TSN traffic, when enabled, had this characteristics:
Packet size: 1500 bytes
Transmission interval: 125us
----------------------------------
Without this patch:
----------------------------------
- TCP data:
- No TSN traffic:
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-20.00 sec 1.35 GBytes 578 Mbits/sec 0
- With TSN traffic:
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-20.00 sec 1.07 GBytes 460 Mbits/sec 1
- TCP data limiting iperf3 buffer size to 4K:
- No TSN traffic:
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-20.00 sec 1.35 GBytes 579 Mbits/sec 0
- With TSN traffic:
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-20.00 sec 1.08 GBytes 462 Mbits/sec 0
- TCP data limiting iperf3 buffer size to 192 bytes (smallest size without
serious performance degradation):
- No TSN traffic:
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-20.00 sec 1.34 GBytes 577 Mbits/sec 0
- With TSN traffic:
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-20.00 sec 1.07 GBytes 461 Mbits/sec 1
- UDP data at 1000Mbit/sec:
- No TSN traffic:
[ ID] Interval Transfer Bitrate Jitter Lost/Total Datagrams
[ 5] 0.00-20.00 sec 1.36 GBytes 586 Mbits/sec 0.000 ms 0/1011407 (0%)
- With TSN traffic:
[ ID] Interval Transfer Bitrate Jitter Lost/Total Datagrams
[ 5] 0.00-20.00 sec 1.05 GBytes 451 Mbits/sec 0.000 ms 0/778672 (0%)
----------------------------------
With this patch:
----------------------------------
- TCP data:
- No TSN traffic:
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-20.00 sec 2.17 GBytes 932 Mbits/sec 0
- With TSN traffic:
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-20.00 sec 1.50 GBytes 646 Mbits/sec 1
- TCP data limiting iperf3 buffer size to 4K:
- No TSN traffic:
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-20.00 sec 2.17 GBytes 931 Mbits/sec 0
- With TSN traffic:
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-20.00 sec 1.50 GBytes 645 Mbits/sec 0
- TCP data limiting iperf3 buffer size to 192 bytes (smallest size without
serious performance degradation):
- No TSN traffic:
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-20.00 sec 2.17 GBytes 932 Mbits/sec 1
- With TSN traffic:
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-20.00 sec 1.50 GBytes 645 Mbits/sec 0
- UDP data at 1000Mbit/sec:
- No TSN traffic:
[ ID] Interval Transfer Bitrate Jitter Lost/Total Datagrams
[ 5] 0.00-20.00 sec 2.23 GBytes 956 Mbits/sec 0.000 ms 0/1650226 (0%)
- With TSN traffic:
[ ID] Interval Transfer Bitrate Jitter Lost/Total Datagrams
[ 5] 0.00-20.00 sec 1.51 GBytes 649 Mbits/sec 0.000 ms 0/1120264 (0%)
Signed-off-by: Ederson de Souza <ederson.desouza@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
I have a handful of fixes that I'd like to target for 5.12, regardless
of whether there's an rc8 or not:
* A fix to properly select SPARSEMEM_STATIC on rv32.
* A handful of fixes to kprobes.
I don't generally like sending stuff this late, but these all seem
pretty safe.
-----BEGIN PGP SIGNATURE-----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=oixV
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.12-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
"A handful of fixes:
- a fix to properly select SPARSEMEM_STATIC on rv32
- a few fixes to kprobes
I don't generally like sending stuff this late, but these all seem
pretty safe"
* tag 'riscv-for-linus-5.12-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: keep interrupts disabled for BREAKPOINT exception
riscv: kprobes/ftrace: Add recursion protection to the ftrace callback
riscv: add do_page_fault and do_trap_break into the kprobes blacklist
riscv: Fix spelling mistake "SPARSEMEM" to "SPARSMEM"
-----BEGIN PGP SIGNATURE-----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=P730
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fix from Catalin Marinas:
"Fix kernel compilation when using the LLVM integrated assembly.
A recent commit (2decad92f4, "arm64: mte: Ensure TIF_MTE_ASYNC_FAULT
is set atomically") broke the kernel build when using the LLVM
integrated assembly (only noticeable with clang-12 as MTE is not
supported by earlier versions and the code in question not compiled).
The Fixes: tag in the commit refers to the original patch introducing
subsections for the alternative code sequences"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: alternatives: Move length validation in alternative_{insn, endif}
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEb4nG6jLu8Y5XI+PfTA9ye/CYqnEFAmB5kZ0ACgkQTA9ye/CY
qnEihBAAnJaC7gsATMlFln+aptFYawq0VmiY6+ADWcUijQdcttSZwBiBZwxN7q64
WEtoNUSUKCgloaQwA/MCZn3RawWpQVObet+hsCyPyiJWjt/J6g4W/G1MIp/LY1rO
H2tfanc/jcyti63aHcXWyUBjc2tNjouu6NbGJ8bIHt67osc9GJstGdZJZME9KHCr
qYj4llOXbPqOg6DerIQcS9W8AYegUqJUShMCZUGpJyoxnxBq1lW4kBKx4ZdCSFd7
0mPa98EsEP77wR5Kg+ohmUCRuXdq/XfiYrOO2k3GMdu1ET0/keJ+ElHQTcbYCy0/
VN8clNRL9VWkWOmwc8nbATENlvKUfSW/6NQaZE7eXn3IrwviXTMOF4v2+hy5YJHq
4iqmJGmy9jE3MxF4IWucHLXFyj7CPARtvBXchnuS2YOn3aEBQIIRdNI/n2TGT0iH
onDs4DHxVUC7aa93ZR3DjI8+Gl90sa0+1IhQ25bSvxNu3b6sO69dcNENUWzz/6ch
EVZ03GmBt4X549ogOwrkWMG38GDH/dn4t7/2Tg+CBDFzcAiRmwhnQSRJ5ieZGpBi
7LPDZ/0P/d2gCNxur4DcqytjXk4Drkhtqm2Zp5+jISD2zAxHUHywW65omIgSRhNC
Ue1AM49Z6eOffJpkwJCC177/5naFjByorlLXt9hHzTtZo5PG6Sk=
=s4/P
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2021-04-16' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Daniel Vetter:
"I pinged the usual suspects, only intel fixes pending"
* tag 'drm-fixes-2021-04-16' of git://anongit.freedesktop.org/drm/drm:
drm/i915/display/vlv_dsi: Do not skip panel_pwr_cycle_delay when disabling the panel
drm/i915: Don't zero out the Y plane's watermarks
drm/i915/dpcd_bl: Don't try vesa interface unless specified by VBT
Current riscv's kprobe handlers are run with both preemption and
interrupt enabled, this violates kprobe requirements. Fix this issue
by keeping interrupts disabled for BREAKPOINT exception.
Fixes: c22b0bcb1d ("riscv: Add kprobes supported")
Cc: stable@vger.kernel.org
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
[Palmer: add a comment]
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Currently, the riscv's kprobes(powerred by ftrace) handler is
preemptible. Futher check indicates we miss something similar as the
commit c536aa1c5b ("kprobes/ftrace: Add recursion protection to the
ftrace callback"), so do similar modifications as the commit does.
Fixes: 829adda597 ("riscv: Add KPROBES_ON_FTRACE supported")
Cc: stable@vger.kernel.org
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
These two functions are used to implement the kprobes feature so they
can't be kprobed.
Fixes: c22b0bcb1d ("riscv: Add kprobes supported")
Cc: stable@vger.kernel.org
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
There is a spelling mistake when SPARSEMEM Kconfig copy.
Fixes: a5406a7ff5 ("riscv: Correct SPARSEMEM configuration")
Cc: stable@vger.kernel.org
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
The "Register Offset Low" register of a "DVSEC Register Locator"
contains the 64K aligned offset for the registers along with the BAR
indicator and an id. The implementation was treating the "Register Block
Offset Low" field a value rather than as a pre-aligned component of the
64-bit offset. So, just mask, don't mask and shift (FIELD_GET).
The user visible result of this bug is that the driver fails to bind to
the device after none of the required blocks are found.
This was missed earlier because the primary development done in the QEMU
environment only uses 0 offsets, i.e. 0 shifted is still 0.
Fixes: 8adaf747c9 ("cxl/mem: Find device capabilities")
Reported-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Link: https://lore.kernel.org/r/20210415232610.603273-1-ben.widawsky@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Jakub Kicinski says:
====================
ethtool: add standard FEC statistics
This set adds uAPI for reporting standard FEC statistics, and
implements it in a handful of drivers.
The statistics are taken from the IEEE standard, with one
extra seemingly popular but not standard statistics added.
The implementation is similar to that of the pause frame
statistics, user requests the stats by setting a bit
(ETHTOOL_FLAG_STATS) in the common ethtool header of
ETHTOOL_MSG_FEC_GET.
Since standard defines the statistics per lane what's
reported is both total and per-lane counters:
# ethtool -I --show-fec eth0
FEC parameters for eth0:
Configured FEC encodings: None
Active FEC encoding: None
Statistics:
corrected_blocks: 256
Lane 0: 255
Lane 1: 1
uncorrectable_blocks: 145
Lane 0: 128
Lane 1: 17
v2: check for errors in mlx5 register access
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Report what appears to be the standard block counts:
- 30.5.1.1.17 aFECCorrectedBlocks
- 30.5.1.1.18 aFECUncorrectableBlocks
Don't report the per-lane symbol counts, if those really
count symbols they are not what the standard calls for
(even if symbols seem like the most useful thing to count.)
Fingers crossed that fec_corrected_errors is not in symbols.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Report corrected bits.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Similarly to pause statistics add stats for FEC.
The IEEE standard mandates two sets of counters:
- 30.5.1.1.17 aFECCorrectedBlocks
- 30.5.1.1.18 aFECUncorrectableBlocks
where block is a block of bits FEC operates on.
Each of these counters is defined per lane (PCS instance).
Multiple vendors provide number of corrected _bits_ rather
than/as well as blocks.
This set adds the 2 standard-based block counters and a extra
one for corrected bits.
Counters are exposed to user space via netlink in new attributes.
Each attribute carries an array of u64s, first element is
the total count, and the following ones are a per-lane break down.
Much like with pause stats the operation will not fail when driver
does not implement the get_fec_stats callback (nor can the driver
fail the operation by returning an error). If stats can't be
reported the relevant attributes will be empty.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Refactor fec_prepare_data() a little bit to skip the body
of the function and exit on error. Currently the code
depends on the fact that we only have one call which
may fail between ethnl_ops_begin() and ethnl_ops_complete()
and simply saves the error code. This will get hairy with
the stats also being queried.
No functional changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Calling two copy_to_user() for very small regions has very high overhead.
Switch to inlined unsafe_put_user() to save one stac/clac sequence,
and avoid copy_to_user().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vinay Kumar Yadav says:
====================
chelsio/ch_ktls: chelsio inline tls driver bug fixes
This series of patches fix following bugs in Chelsio inline tls driver.
Patch1: kernel panic.
Patch2: connection close issue.
Patch3: tcb close call issue.
Patch4: unnecessary snd_una update.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
snd_una update should not be done when the same skb is being
sent out.chcr_short_record_handler() sends it again even
though SND_UNA update is already sent for the skb in
chcr_ktls_xmit(), which causes mismatch in un-acked
TCP seq number, later causes problem in sending out
complete record.
Fixes: 429765a149 ("chcr: handle partial end part of a record")
Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com>
Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
HW doesn't need marking TCB closed. This TCB state change
sometimes causes problem to the new connection which gets
the same tid.
Fixes: 34aba2c450 ("cxgb4/chcr : Register to tls add and del callback")
Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com>
Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When sge queue is full and chcr_ktls_xmit_wr_complete()
returns failure, skb is not freed if it is not the last tls record in
this skb, causes refcount never gets freed and tls_dev_del()
never gets called on this connection.
Fixes: 5a4b9fe7fe ("cxgb4/chcr: complete record tx handling")
Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com>
Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Taking page refcount is not ideal and causes kernel panic
sometimes. It's better to take tx_ctx lock for the complete
skb transmit, to avoid page cleanup if ACK received in middle.
Fixes: 5a4b9fe7fe ("cxgb4/chcr: complete record tx handling")
Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com>
Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Convert system_wq queue_work() to schedule_work() which is
a wrapper around it, since the former is a rare construct.
Fixes: 7294380c52 ("enetc: support PTP Sync packet one-step timestamping")
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Huazhong Tan says:
====================
net: hns3: updates for -next
This series adds support for pushing link status to VFs for
the HNS3 ethernet driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
To reduce the processing of unnecessary mailbox command when PF supports
actively push its link status to VFs, VFs stop sending request link
status command in periodic service task in this case.
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Previously, VF updates its link status every second by send query command
to PF in periodic service task. If link stats of PF is changed, VF may
need at most one second to update its link status.
To reduce delay of link status between PF and VFs, PF actively push its
link status to VFs when its link status is updated. And to let VF know
PF supports this new feature, the link status changed mailbox command
adds one bit to indicate it.
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The Atheros AR8031 and AR8033 expose different registers for SGMII/Fiber
as well as the copper side of the PHY depending on the BT_BX_REG_SEL bit
in the chip configure register.
The driver assumes the copper side is selected on probe, but this might
not be the case depending which page was last selected by the
bootloader. Notably, Ubiquiti UniFi bootloaders show this behavior.
Select the copper page when probing to circumvent this.
Signed-off-by: David Bauer <mail@david-bauer.net>
Signed-off-by: David S. Miller <davem@davemloft.net>