When parsing {fore, back} ground color configs, use ltrim() instead of
just while loop and isspace().
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1491575061-704-4-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To strip csv output, use ltrim() instead of just while loop and
isspace() at print_metric_{only}_csv().
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1491575061-704-3-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The kernel has a special check for a specific irq_vectors trace event.
TRACE_EVENT_PERF_PERM(irq_work_exit,
is_sampling_event(p_event) ? -EPERM : 0);
The perf-record fails for this irq_vectors event when it is present,
like when using a wildcard:
root@skl:/tmp# perf record -a -e irq_vectors:* sleep 2
Error:
You may not have permission to collect system-wide stats.
Consider tweaking /proc/sys/kernel/perf_event_paranoid,
which controls use of the performance events system by
unprivileged users (without CAP_SYS_ADMIN).
The current value is 2:
-1: Allow use of (almost) all events by all users
>= 0: Disallow raw tracepoint access by users without CAP_IOC_LOCK
>= 1: Disallow CPU event access by users without CAP_SYS_ADMIN
>= 2: Disallow kernel profiling by users without CAP_SYS_ADMIN
To make this setting permanent, edit /etc/sysctl.conf too, e.g.:
kernel.perf_event_paranoid = -1
This patch prints out the exact sub event that failed with EPERM for
wildcards to help in understanding what went wrong when this event is
present:
After the patch:
root@skl:/tmp# perf record -a -e irq_vectors:* sleep 2
Error:
No permission to enable irq_vectors:irq_work_exit event.
You may not have permission to collect system-wide stats.
......
Committer notes:
So we have a lot of irq_vectors events:
[root@jouet ~]# perf list irq_vectors:*
List of pre-defined events (to be used in -e):
irq_vectors:call_function_entry [Tracepoint event]
irq_vectors:call_function_exit [Tracepoint event]
irq_vectors:call_function_single_entry [Tracepoint event]
irq_vectors:call_function_single_exit [Tracepoint event]
irq_vectors:deferred_error_apic_entry [Tracepoint event]
irq_vectors:deferred_error_apic_exit [Tracepoint event]
irq_vectors:error_apic_entry [Tracepoint event]
irq_vectors:error_apic_exit [Tracepoint event]
irq_vectors:irq_work_entry [Tracepoint event]
irq_vectors:irq_work_exit [Tracepoint event]
irq_vectors:local_timer_entry [Tracepoint event]
irq_vectors:local_timer_exit [Tracepoint event]
irq_vectors:reschedule_entry [Tracepoint event]
irq_vectors:reschedule_exit [Tracepoint event]
irq_vectors:spurious_apic_entry [Tracepoint event]
irq_vectors:spurious_apic_exit [Tracepoint event]
irq_vectors:thermal_apic_entry [Tracepoint event]
irq_vectors:thermal_apic_exit [Tracepoint event]
irq_vectors:threshold_apic_entry [Tracepoint event]
irq_vectors:threshold_apic_exit [Tracepoint event]
irq_vectors:x86_platform_ipi_entry [Tracepoint event]
irq_vectors:x86_platform_ipi_exit [Tracepoint event]
#
And some may be sampled:
[root@jouet ~]# perf record -e irq_vectors:local* sleep 20s
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.020 MB perf.data (2 samples) ]
[root@jouet ~]# perf report -D | egrep 'stats:|events:'
Aggregated stats:
TOTAL events: 155
MMAP events: 144
COMM events: 2
EXIT events: 1
SAMPLE events: 2
MMAP2 events: 4
FINISHED_ROUND events: 1
TIME_CONV events: 1
irq_vectors:local_timer_entry stats:
TOTAL events: 1
SAMPLE events: 1
irq_vectors:local_timer_exit stats:
TOTAL events: 1
SAMPLE events: 1
[root@jouet ~]#
But, as shown in the tracepoint definition at the start of this message,
some, like "irq_vectors:irq_work_exit", may not be sampled, just counted,
i.e. if we try to sample, as when using 'perf record', we get an error:
[root@jouet ~]# perf record -e irq_vectors:irq_work_exit
Error:
You may not have permission to collect system-wide stats.
Consider tweaking /proc/sys/kernel/perf_event_paranoid,
<SNIP>
The error message is misleading, this patch will help in pointing out
what is the event causing such an error, but the error message needs
improvement, i.e. we need to figure out a way to check if a tracepoint
is counting only, like this one, when all we can do is to count it with
'perf stat', at most printing the delta using interval printing, as in:
[root@jouet ~]# perf stat -I 5000 -e irq_vectors:irq_work_*
# time counts unit events
5.000168871 0 irq_vectors:irq_work_entry
5.000168871 0 irq_vectors:irq_work_exit
10.000676730 0 irq_vectors:irq_work_entry
10.000676730 0 irq_vectors:irq_work_exit
15.001122415 0 irq_vectors:irq_work_entry
15.001122415 0 irq_vectors:irq_work_exit
20.001298051 0 irq_vectors:irq_work_entry
20.001298051 0 irq_vectors:irq_work_exit
25.001485020 1 irq_vectors:irq_work_entry
25.001485020 1 irq_vectors:irq_work_exit
30.001658706 0 irq_vectors:irq_work_entry
30.001658706 0 irq_vectors:irq_work_exit
^C 32.045711878 0 irq_vectors:irq_work_entry
32.045711878 0 irq_vectors:irq_work_exit
[root@jouet ~]#
But at least, when we use a wildcard, this patch helps a bit.
Signed-off-by: Yao Jin <yao.jin@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1491566932-503-1-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The option 'show-total-period' works fine without a option '-l'. But if
running 'perf annotate --stdio -l --show-total-period', you can see a
problem showing only zero '0' for number of samples.
Before:
$ perf annotate --stdio -l --show-total-period
...
0 : 400816: push %rbp
0 : 400817: mov %rsp,%rbp
0 : 40081a: mov %edi,-0x24(%rbp)
0 : 40081d: mov %rsi,-0x30(%rbp)
0 : 400821: mov -0x24(%rbp),%eax
0 : 400824: mov -0x30(%rbp),%rdx
0 : 400828: mov (%rdx),%esi
0 : 40082a: mov $0x0,%edx
...
The reason is it was missed to set number of samples of
source_line_samples, so set it ordinarily.
After:
$ perf annotate --stdio -l --show-total-period
...
3 : 400816: push %rbp
4 : 400817: mov %rsp,%rbp
0 : 40081a: mov %edi,-0x24(%rbp)
0 : 40081d: mov %rsi,-0x30(%rbp)
1 : 400821: mov -0x24(%rbp),%eax
2 : 400824: mov -0x30(%rbp),%rdx
0 : 400828: mov (%rdx),%esi
1 : 40082a: mov $0x0,%edx
...
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Martin Liska <mliska@suse.cz>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 0c4a5bcea4 ("perf annotate: Display total number of samples with --show-total-period")
Link: http://lkml.kernel.org/r/1490703125-13643-1-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The callers of perf_read_values__enlarge_counters() already propagate
errors, so just print some debug diagnostics and handle allocation
failures gracefully, not trying to do silly things like 'a =
realloc(a)'.
Link: http://lkml.kernel.org/n/tip-nsmmh7uzpg35rzcl9nq7yztp@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull perf/core improvements from Andi Kleen:
This pull requests contains updates to the Intel PMU events JSON files,
plus two one liner code fixes for the JSON files (also appended as patch)
The most remarkable change is support for Sandy Bridge to Skylake
client uncore event list support.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
SDT marker argument is in N@OP format. Here OP is arch dependent
component. Add powerpc logic to parse OP and convert it to uprobe
compatible format.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexis Berlemont <alexis.berlemont@gmail.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170328094754.3156-4-ravi.bangoria@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To test it, build samples/statx/test_statx, which I did as:
$ make headers_install
$ cc -I ~/git/linux/usr/include samples/statx/test-statx.c -o /tmp/statx
And then use perf trace on it:
# perf trace -e statx /tmp/statx /etc/passwd
statx(/etc/passwd) = 0
results=7ff
Size: 3496 Blocks: 8 IO Block: 4096 regular file
Device: fd:00 Inode: 280156 Links: 1
Access: (0644/-rw-r--r--) Uid: 0 Gid: 0
Access: 2017-03-29 16:01:01.650073438-0300
Modify: 2017-03-10 16:25:14.156479354-0300
Change: 2017-03-10 16:25:14.171479328-0300
0.000 ( 0.007 ms): statx/30648 statx(dfd: CWD, filename: 0x7ef503f4, flags: SYMLINK_NOFOLLOW, mask: TYPE|MODE|NLINK|UID|GID|ATIME|MTIME|CTIME|INO|SIZE|BLOCKS|BTIME, buffer: 0x7fff7ef4eb10) = 0
#
Using the test-stat.c options to change the mask:
# perf trace -e statx /tmp/statx -O /etc/passwd > /dev/null
0.000 ( 0.008 ms): statx/30745 statx(dfd: CWD, filename: 0x3a0753f4, flags: SYMLINK_NOFOLLOW, mask: BTIME, buffer: 0x7ffd3a0735c0) = 0
#
# perf trace -e statx /tmp/statx -A /etc/passwd > /dev/null
0.000 ( 0.010 ms): statx/30757 statx(dfd: CWD, filename: 0xa94e63f4, flags: SYMLINK_NOFOLLOW|NO_AUTOMOUNT, mask: TYPE|MODE|NLINK|UID|GID|ATIME|MTIME|CTIME|INO|SIZE|BLOCKS|BTIME, buffer: 0x7ffea94e49d0) = 0
#
# trace --no-inherit -e statx /tmp/statx -F /etc/passwd > /dev/null
0.000 ( 0.011 ms): statx(dfd: CWD, filename: 0x3b02d3f3, flags: SYMLINK_NOFOLLOW|STATX_FORCE_SYNC, mask: TYPE|MODE|NLINK|UID|GID|ATIME|MTIME|CTIME|INO|SIZE|BLOCKS|BTIME, buffer: 0x7ffd3b02c850) = 0
#
# trace --no-inherit -e statx /tmp/statx -F -L /etc/passwd > /dev/null
0.000 ( 0.008 ms): statx(dfd: CWD, filename: 0x15cff3f3, flags: STATX_FORCE_SYNC, mask: TYPE|MODE|NLINK|UID|GID|ATIME|MTIME|CTIME|INO|SIZE|BLOCKS|BTIME, buffer: 0x7fff15cfdda0) = 0
#
# trace --no-inherit -e statx /tmp/statx -D -O /etc/passwd > /dev/null
0.000 ( 0.009 ms): statx(dfd: CWD, filename: 0xfa37f3f3, flags: SYMLINK_NOFOLLOW|STATX_DONT_SYNC, mask: BTIME, buffer: 0x7ffffa37da20) = 0
#
Adding a probe to get the filename collected as well:
# perf probe 'vfs_getname=getname_flags:72 pathname=result->name:string'
Added new event:
probe:vfs_getname (on getname_flags:72 with pathname=result->name:string)
You can now use it in all perf tools, such as:
perf record -e probe:vfs_getname -aR sleep 1
# trace --no-inherit -e statx /tmp/statx -D -O /etc/passwd > /dev/null
0.169 ( 0.007 ms): statx(dfd: CWD, filename: /etc/passwd, flags: SYMLINK_NOFOLLOW|STATX_DONT_SYNC, mask: BTIME, buffer: 0x7ffda9bf50f0) = 0
#
Same technique could be used to collect and beautify the result put in
the 'buffer' argument.
Finally do a system wide 'perf trace' session looking for any use of statx,
then run the test proggie with various flags:
# trace -e statx
16612.967 ( 0.028 ms): statx/4562 statx(dfd: CWD, filename: /tmp/statx, flags: SYMLINK_NOFOLLOW, mask: TYPE|MODE|NLINK|UID|GID|ATIME|MTIME|CTIME|INO|SIZE|BLOCKS|BTIME, buffer: 0x7ffef195d660) = 0
33064.447 ( 0.011 ms): statx/4569 statx(dfd: CWD, filename: /tmp/statx, flags: SYMLINK_NOFOLLOW|STATX_FORCE_SYNC, mask: TYPE|MODE|NLINK|UID|GID|ATIME|MTIME|CTIME|INO|SIZE|BLOCKS|BTIME, buffer: 0x7ffc5484c790) = 0
36050.891 ( 0.023 ms): statx/4576 statx(dfd: CWD, filename: /tmp/statx, flags: SYMLINK_NOFOLLOW, mask: BTIME, buffer: 0x7ffeb18b66e0) = 0
38039.889 ( 0.023 ms): statx/4584 statx(dfd: CWD, filename: /tmp/statx, flags: SYMLINK_NOFOLLOW, mask: TYPE|MODE|NLINK|UID|GID|ATIME|MTIME|CTIME|INO|SIZE|BLOCKS|BTIME, buffer: 0x7fff1db0ea90) = 0
^C#
This one also starts moving the beautifiers from files directly included
in builtin-trace.c to separate objects + a beauty.h header with
prototypes, so that we can add test cases in tools/perf/tests/ to fire
syscalls with various arguments and then get them intercepted as
syscalls:sys_enter_foo or raw_syscalls:sys_enter + sys_exit to then
format and check that the formatted output is the one we expect.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: David Ahern <dsahern@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-xvzw8eynffvez5czyzidhrno@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently we fail in the following case:
$ unset HOME
$ ./perf record ls
$ echo $?
255
It's because the config code init fails due to a missing HOME variable
value. Fix this by skipping the user config init if there's no HOME
variable value.
Reported-by: Jan Stancek <jstancek@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20170330144637.7468-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We will need it to build tools/perf/trace/beauty/statx.h.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-nin41ve2fa63lrfbdr6x57yr@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a missing space in the JSON description after the uncore unit
Before:
perf list
...
unc_arb_coh_trk_requests.all
[Unit: uncore_arbNumber of entries allocated. Account for Any type: e.g. Snoop, Core aperture, etc]
...
After:
unc_arb_coh_trk_requests.all
[Unit: uncore_arb Number of entries allocated. Account for Any type: e.g. Snoop, Core aperture, etc]
Cc: jolsa@kernel.org
Link: http://lkml.kernel.org/n/tip-p989c7x9kaiy2bnkmgpo6cvt@git.kernel.org
Signed-off-by: Andi Kleen <ak@linux.intel.com>
An earlier update removed the UNC_M_CLOCKTICKS event for Broadwell DE.
But Metric events were still referring to it.
This adds it back under a different name from the event list,
and also fixes up the Metric events to use the new name.
Cc: jolsa@kernel.org
Link: http://lkml.kernel.org/n/tip-zxxzg4g5nr93o7np00vgqqwm@git.kernel.org
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Trivial fix to spelling mistake in pr_debug message.
Signed-off-by: Colin King <colin.king@canonical.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Krister Johansen <kjlx@templeofstupid.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kernel-janitors@vger.kernel.org
Link: http://lkml.kernel.org/r/20170330095440.19444-1-colin.king@canonical.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Which may happen when we start a tracing session and a thread is waiting
for something like "poll" to return, in which case we better print "?"
both for the syscall entry timestamp and for the duration.
E.g.:
Tracing existing mutt session:
# perf trace -p `pidof mutt`
? ( ? ): mutt/17135 ... [continued]: poll()) = 1
0.027 ( 0.013 ms): mutt/17135 read(buf: 0x7ffcb3c42cef, count: 1) = 1
0.047 ( 0.008 ms): mutt/17135 poll(ufds: 0x7ffcb3c42c50, nfds: 1, timeout_msecs: 1000) = 1
0.059 ( 0.008 ms): mutt/17135 read(buf: 0x7ffcb3c42cef, count: 1) = 1
<SNIP>
Before it would print a large number because we'd do:
ttrace->entry_time - trace->base_time
And entry_time would be 0, while base_time would be the timestamp for
the first event 'perf trace' reads, oops.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Claudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-wbcb93ofva2qdjd5ltn5eeqq@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For some platforms, for example Broadwell, it doesn't support cycles
for LBR. But the perf always prints cycles:0, it's not necessary.
The patch refactors the LBR info print code and drops the cycles:0.
For example: perf report --branch-history --no-children --stdio
On Broadwell:
--0.91%--__random_r random_r.c:394 (iterations:2)
__random_r random_r.c:360 (predicted:0.0%)
__random_r random_r.c:380 (predicted:0.0%)
__random_r random_r.c:357
On Skylake:
--1.07%--main div.c:39 (predicted:52.4% cycles:1 iterations:17)
main div.c:44 (predicted:52.4% cycles:1)
main div.c:42 (cycles:2)
compute_flag div.c:28 (cycles:2)
compute_flag div.c:27 (cycles:1)
rand rand.c:28 (cycles:1)
rand rand.c:28 (cycles:1)
__random random.c:298 (cycles:1)
__random random.c:297 (cycles:1)
__random random.c:295 (cycles:1)
__random random.c:295 (cycles:1)
__random random.c:295 (cycles:1)
Signed-off-by: Yao Jin <yao.jin@linux.intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Link: http://lkml.kernel.org/r/1489046786-10061-1-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
SDT marker argument is in N@OP format. N is the size of argument and OP
is the actual assembly operand. OP is arch dependent component and hence
it's parsing logic also should be placed under tools/perf/arch/.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexis Berlemont <alexis.berlemont@gmail.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170328094754.3156-3-ravi.bangoria@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
I found couple of events using al, bl, cl and dl registers for argument.
These are not directly accepted by uprobe_events and thus needs to be
mapped to ax, bx, cx and dx respectively.
Few ex,
/usr/bin/qemu-system-s390x
css_adapter_interrupt: 1@%bl
css_chpid_add: 1@%cl 1@%sil 1@%dl
dma_bdrv_io: 8@%rbx 8@%rbp -8@%r14 1@%al
/usr/bin/postgres
buffer__read__done: ... -1@-bash -1@%al
buffer__read__start: ... -1@%al
I don't find any sdt events using ah, bh,... registers. But I also don't
see any reason to not use them, so there might be rare events using
these registers, and if so, perf should have a renaming logic for them
too.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexis Berlemont <alexis.berlemont@gmail.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170328094754.3156-2-ravi.bangoria@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This came from 'git', but isn't documented anywhere in
tools/perf/Documentation/, looks like baggage we can do without, ditch
it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-e7uwkn60t4hmlnwj99ba4t2s@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
New features:
- Handle inline functions in callchains (Jin Yao)
- Enable sorting by srcline as key (Milian Wolff)
Fixes:
- Fix no_size logic in addr_filter__resolve_kernel_syms() in the
auxtrace code (Adrian Hunter)
- Fix some thread refcount leaks in 'perf trace' (Arnaldo Carvalho de Melo)
- Fix divide by zero when calculating percent for an event in a group in
the annotate by source line code (Taeung Song)
- build-id files now aren't anymore symlinks, their parent directories
are, so readlink the later (Taeung Song)
- Assorted fixes for null termination problems, mostly related to
readlink, detected by valgrind (Tommi Rantala)
Infrastructure:
- Make vfs_getname probe point logic in 'perf trace' more robust
wrt length of pathname (Arnaldo Carvalho de Melo)
- Remove unused 'prefix' parameter from builtins main functions (Arnaldo Carvalho de Melo)
- Show 'perf list sdt' option in man page (Ravi Bangoria)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=Lm/M
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo-4.12-20170327' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
New features:
- Handle inline functions in callchains (Jin Yao)
- Enable sorting by srcline as key (Milian Wolff)
Fixes:
- Fix no_size logic in addr_filter__resolve_kernel_syms() in the
auxtrace code (Adrian Hunter)
- Fix some thread refcount leaks in 'perf trace' (Arnaldo Carvalho de Melo)
- Fix divide by zero when calculating percent for an event in a group in
the annotate by source line code (Taeung Song)
- build-id files now aren't anymore symlinks, their parent directories
are, so readlink the later (Taeung Song)
- Assorted fixes for null termination problems, mostly related to
readlink, detected by valgrind (Tommi Rantala)
Infrastructure changes:
- Make vfs_getname probe point logic in 'perf trace' more robust
wrt length of pathname (Arnaldo Carvalho de Melo)
- Remove unused 'prefix' parameter from builtins main functions (Arnaldo Carvalho de Melo)
- Show 'perf list sdt' option in man page (Ravi Bangoria)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Simplification: it is easier to open /proc/self/exe than /proc/$pid/exe.
Signed-off-by: Tommi Rantala <tommi.t.rantala@nokia.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170322130624.21881-7-tommi.t.rantala@nokia.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ensure that the string that we read from the data file is null terminated.
Valgrind was complaining:
==31357== Invalid read of size 1
==31357== at 0x4EC8C1: __strtok_r_1c (string2.h:200)
==31357== by 0x4EC8C1: parse_ftrace_printk (trace-event-parse.c:161)
==31357== by 0x4F82A8: read_ftrace_printk (trace-event-read.c:204)
==31357== by 0x4F82A8: trace_report (trace-event-read.c:468)
==31357== by 0x4CD552: process_tracing_data (header.c:1576)
==31357== by 0x4D3397: perf_file_section__process (header.c:2705)
==31357== by 0x4D3397: perf_header__process_sections (header.c:2488)
==31357== by 0x4D3397: perf_session__read_header (header.c:2925)
==31357== by 0x4E71E2: perf_session__open (session.c:32)
==31357== by 0x4E71E2: perf_session__new (session.c:139)
==31357== by 0x429F5D: cmd_annotate (builtin-annotate.c:472)
==31357== by 0x497150: run_builtin (perf.c:359)
==31357== by 0x428CE0: handle_internal_command (perf.c:421)
==31357== by 0x428CE0: run_argv (perf.c:467)
==31357== by 0x428CE0: main (perf.c:614)
==31357== Address 0x8ac0efb is 0 bytes after a block of size 1,963 alloc'd
==31357== at 0x4C2DB9D: malloc (vg_replace_malloc.c:299)
==31357== by 0x4F827B: read_ftrace_printk (trace-event-read.c:195)
==31357== by 0x4F827B: trace_report (trace-event-read.c:468)
==31357== by 0x4CD552: process_tracing_data (header.c:1576)
==31357== by 0x4D3397: perf_file_section__process (header.c:2705)
==31357== by 0x4D3397: perf_header__process_sections (header.c:2488)
==31357== by 0x4D3397: perf_session__read_header (header.c:2925)
==31357== by 0x4E71E2: perf_session__open (session.c:32)
==31357== by 0x4E71E2: perf_session__new (session.c:139)
==31357== by 0x429F5D: cmd_annotate (builtin-annotate.c:472)
==31357== by 0x497150: run_builtin (perf.c:359)
==31357== by 0x428CE0: handle_internal_command (perf.c:421)
==31357== by 0x428CE0: run_argv (perf.c:467)
==31357== by 0x428CE0: main (perf.c:614)
Signed-off-by: Tommi Rantala <tommi.t.rantala@nokia.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170322130624.21881-6-tommi.t.rantala@nokia.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ensure that we have space for the null byte in buf.
Signed-off-by: Tommi Rantala <tommi.t.rantala@nokia.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170322130624.21881-5-tommi.t.rantala@nokia.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ensure that the string in buf is null terminated.
Signed-off-by: Tommi Rantala <tommi.t.rantala@nokia.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170322130624.21881-4-tommi.t.rantala@nokia.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Valgrind was complaining:
$ valgrind ./perf list >/dev/null
==11643== Memcheck, a memory error detector
==11643== Copyright (C) 2002-2015, and GNU GPL'd, by Julian Seward et al.
==11643== Using Valgrind-3.12.0 and LibVEX; rerun with -h for copyright info
==11643== Command: ./perf list
==11643==
==11643== Conditional jump or move depends on uninitialised value(s)
==11643== at 0x4C30620: rindex (vg_replace_strmem.c:199)
==11643== by 0x49DAA9: build_id_cache__origname (build-id.c:198)
==11643== by 0x49E1C7: build_id_cache__valid_id (build-id.c:222)
==11643== by 0x49E1C7: build_id_cache__list_all (build-id.c:507)
==11643== by 0x4B9C8F: print_sdt_events (parse-events.c:2067)
==11643== by 0x4BB0B3: print_events (parse-events.c:2313)
==11643== by 0x439501: cmd_list (builtin-list.c:53)
==11643== by 0x497150: run_builtin (perf.c:359)
==11643== by 0x428CE0: handle_internal_command (perf.c:421)
==11643== by 0x428CE0: run_argv (perf.c:467)
==11643== by 0x428CE0: main (perf.c:614)
[...]
Additionally, a zero length result from readlink() is not very interesting.
Signed-off-by: Tommi Rantala <tommi.t.rantala@nokia.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170322130624.21881-3-tommi.t.rantala@nokia.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Valgrind was complaining:
==2633== Syscall param open(filename) points to unaddressable byte(s)
==2633== at 0x5281CC0: __open_nocancel (syscall-template.S:84)
==2633== by 0x537D38: open (fcntl2.h:53)
==2633== by 0x537D38: get_sdt_note_list (symbol-elf.c:2017)
==2633== by 0x5396FD: probe_cache__scan_sdt (probe-file.c:700)
==2633== by 0x49EA2C: build_id_cache__add_sdt_cache (build-id.c:625)
==2633== by 0x49EA2C: build_id_cache__add_s (build-id.c:697)
==2633== by 0x49EE72: build_id_cache__add_b (build-id.c:717)
==2633== by 0x49EE72: dso__cache_build_id (build-id.c:782)
==2633== by 0x49F190: __dsos__cache_build_ids (build-id.c:793)
==2633== by 0x49F190: machine__cache_build_ids (build-id.c:801)
==2633== by 0x49F190: perf_session__cache_build_ids (build-id.c:815)
==2633== by 0x4CD4F2: write_build_id (header.c:165)
==2633== by 0x4D26F7: do_write_feat (header.c:2296)
==2633== by 0x4D26F7: perf_header__adds_write (header.c:2335)
==2633== by 0x4D26F7: perf_session__write_header (header.c:2414)
==2633== by 0x43B324: __cmd_record (builtin-record.c:1154)
==2633== by 0x43B324: cmd_record (builtin-record.c:1839)
==2633== by 0x455A07: __cmd_record (builtin-kmem.c:1868)
==2633== by 0x455A07: cmd_kmem (builtin-kmem.c:1944)
==2633== by 0x497150: run_builtin (perf.c:359)
==2633== by 0x428CE0: handle_internal_command (perf.c:421)
==2633== by 0x428CE0: run_argv (perf.c:467)
==2633== by 0x428CE0: main (perf.c:614)
==2633== Address 0x0 is not stack'd, malloc'd or (recently) free'd
Signed-off-by: Tommi Rantala <tommi.t.rantala@nokia.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tommi Rantala <tommi.t.rantala@nokia.com>
Link: http://lkml.kernel.org/r/20170322130624.21881-2-tommi.t.rantala@nokia.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It is wrong way to read link name from a build-id file. Because a
build-id file is not anymore a symbolic link but build-id directory of
it is symbolic link, so fix it.
For example, if build-id file name gotten from
dso__build_id_filename() is as below,
/root/.debug/.build-id/4f/75c7d197c951659d1c1b8b5fd49bcdf8f3f8b1/elf
To correctly read link name of build-id, use the build-id dir path that
is a symbolic link, instead of the above build-id file name like below.
/root/.debug/.build-id/4f/75c7d197c951659d1c1b8b5fd49bcdf8f3f8b1
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1490598638-13947-2-git-send-email-treeze.taeung@gmail.com
Fixes: 01412261d9 ("perf buildid-cache: Use path/to/bin/buildid/elf instead of path/to/bin/buildid")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Often it is interesting to know how costly a given source line is in
total. Previously, one had to build these sums manually based on all
addresses that pointed to the same source line. This patch introduces
srcline as a sort key, which will do the aggregation for us.
Paired with the recent addition of showing inline frames, this makes
perf report much more useful for many C++ work loads.
The following shows the new feature in action. First, let's show the
status quo output when we sort by address. The result contains many hist
entries that generate the same output:
~~~~~~~~~~~~~~~~
$ perf report --stdio --inline -g address
# Children Self Command Shared Object Symbol
# ........ ........ ............ ................... .........................................
#
99.89% 35.34% cpp-inlining cpp-inlining [.] main
|
|--64.55%--main complex:655
| /home/milian/projects/kdab/rnd/hotspot/tests/test-clients/cpp-inlining/main.cpp:39 (inline)
| /usr/include/c++/6.3.1/complex:664 (inline)
| |
| |--60.31%--hypot +20
| | |
| | |--8.52%--__hypot_finite +273
| | |
| | |--7.32%--__hypot_finite +411
...
--35.34%--_start +4194346
__libc_start_main +241
|
|--6.65%--main random.tcc:3326
| /home/milian/projects/kdab/rnd/hotspot/tests/test-clients/cpp-inlining/main.cpp:39 (inline)
| /usr/include/c++/6.3.1/bits/random.h:1809 (inline)
| /usr/include/c++/6.3.1/bits/random.h:1818 (inline)
| /usr/include/c++/6.3.1/bits/random.h:185 (inline)
|
|--2.70%--main random.tcc:3326
| /home/milian/projects/kdab/rnd/hotspot/tests/test-clients/cpp-inlining/main.cpp:39 (inline)
| /usr/include/c++/6.3.1/bits/random.h:1809 (inline)
| /usr/include/c++/6.3.1/bits/random.h:1818 (inline)
| /usr/include/c++/6.3.1/bits/random.h:185 (inline)
|
|--1.69%--main random.tcc:3326
| /home/milian/projects/kdab/rnd/hotspot/tests/test-clients/cpp-inlining/main.cpp:39 (inline)
| /usr/include/c++/6.3.1/bits/random.h:1809 (inline)
| /usr/include/c++/6.3.1/bits/random.h:1818 (inline)
| /usr/include/c++/6.3.1/bits/random.h:185 (inline)
...
~~~~~~~~~~~~~~~~
With this patch and `-g srcline` we instead get the following output:
~~~~~~~~~~~~~~~~
$ perf report --stdio --inline -g srcline
# Children Self Command Shared Object Symbol
# ........ ........ ............ ................... .........................................
#
99.89% 35.34% cpp-inlining cpp-inlining [.] main
|
|--64.55%--main complex:655
| /home/milian/projects/kdab/rnd/hotspot/tests/test-clients/cpp-inlining/main.cpp:39 (inline)
| /usr/include/c++/6.3.1/complex:664 (inline)
| |
| |--64.02%--hypot
| | |
| | --59.81%--__hypot_finite
| |
| --0.53%--cabs
|
--35.34%--_start
__libc_start_main
|
|--12.48%--main random.tcc:3326
| /home/milian/projects/kdab/rnd/hotspot/tests/test-clients/cpp-inlining/main.cpp:39 (inline)
| /usr/include/c++/6.3.1/bits/random.h:1809 (inline)
| /usr/include/c++/6.3.1/bits/random.h:1818 (inline)
| /usr/include/c++/6.3.1/bits/random.h:185 (inline)
...
~~~~~~~~~~~~~~~~
Signed-off-by: Milian Wolff <milian.wolff@kdab.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Yao Jin <yao.jin@linux.intel.com>
Link: http://lkml.kernel.org/r/20170318214928.9047-1-milian.wolff@kdab.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If the address belongs to an inlined function, the source information
back to the first non-inlined function will be printed.
For example:
1. Show inlined function name
perf report -g function --inline
- 0.69% 0.00% inline ld-2.23.so [.] dl_main
- dl_main
0.56% _dl_relocate_object
_dl_relocate_object (inline)
elf_dynamic_do_Rela (inline)
2. Show the file/line information
perf report -g address --inline
- 0.69% 0.00% inline ld-2.23.so [.] _dl_start
_dl_start rtld.c:307
/build/glibc-GKVZIf/glibc-2.23/elf/rtld.c:413 (inline)
+ _dl_sysdep_start dl-sysdep.c:250
Signed-off-by: Yao Jin <yao.jin@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Milian Wolff <milian.wolff@kdab.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Link: http://lkml.kernel.org/r/1490474069-15823-6-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It takes some time to look for inline stack for callgraph addresses. So
it provides new option "--inline" to let user decide if enable this
feature.
--inline:
If a callgraph address belongs to an inlined function, the inline stack
will be printed. Each entry is the inline function name or file/line.
Signed-off-by: Yao Jin <yao.jin@linux.intel.com>
Tested-by: Milian Wolff <milian.wolff@kdab.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Link: http://lkml.kernel.org/r/1490474069-15823-4-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It would be useful for perf to support a mode to query the inline stack
for a given callgraph address. This would simplify finding the right
code in code that does a lot of inlining.
The srcline.c has contained the code which supports to translate the
address to filename:line_nr. This patch just extends the function to let
it support getting the inline stacks.
It introduces the inline_list which will store the inline function
result (filename:line_nr and funcname).
If BFD lib is not supported, the result is only filename:line_nr.
Signed-off-by: Yao Jin <yao.jin@linux.intel.com>
Tested-by: Milian Wolff <milian.wolff@kdab.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Link: http://lkml.kernel.org/r/1490474069-15823-3-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Introduce dso__name() and filename_split() out of existing code because
these codes will be used in several places in next patch.
For filename_split(), it may also solve a potential memory leak in
existing code. In existing addr2line(),
sep = strchr(filename, ':');
if (sep) {
*sep++ = '\0';
*file = filename;
*line_nr = strtoul(sep, NULL, 0);
ret = 1;
}
out:
pclose(fp);
return ret;
If sep is NULL, filename is not freed or returned via file.
Signed-off-by: Yao Jin <yao.jin@linux.intel.com>
Tested-by: Milian Wolff <milian.wolff@kdab.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Link: http://lkml.kernel.org/r/1490474069-15823-2-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We got it from the git sources but never used it for anything, with the
place where this would be somehow used remaining:
static int run_builtin(struct cmd_struct *p, int argc, const char **argv)
{
prefix = NULL;
if (p->option & RUN_SETUP)
prefix = NULL; /* setup_perf_directory(); */
Ditch it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-uw5swz05vol0qpr32c5lpvus@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit 40218daea1 ("perf list: Show SDT and pre-cached events") added
sdt support in perf list, but it missed to update documentation.
Show sdt option in man perf-list.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20170327025538.1753-1-ravi.bangoria@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Address filtering with kernel symbols incorrectly resulted in the error
"Cannot determine size of symbol" because the no_size logic was the wrong
way around.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Andi Kleen <ak@linux.intel.com>
Cc: stable@vger.kernel.org # v4.9+
Link: http://lkml.kernel.org/r/1490357752-27942-1-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In trace__vfs_getname() and when checking if a thread is filtered in
trace__process_sample() we were not dropping the reference obtained via
machine__findnew_thread(), fix it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-9gc470phavxwxv5d9w7ck8ev@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It shouldn't be zero, but if the 'perf probe' on getname_flags() (or
elsewhere in the future we need to probe to catch the pathname for
syscalls like 'open' being copied from userspace to the kernel) is
misplaced somehow, then we will end up not allocating space and trying
to copy the "" empty string to ttrace->filename.name, causing a
segfault, fix it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-c4f1t6sx1nczuzop19r5si5s@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch fix some spelling typos found in printk.
[jkosina@suse.cz: drop arch/arm64/kernel/hibernate.c that was already
in place]
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Move the printing of perf expressions and internal events to a new
clearer --details flag, instead of lumping it together with other debug
options in --debug. This makes it clearer to use.
Before
perf list --debug
...
unc_m_power_critical_throttle_cycles
[Cycles all ranks are in critical thermal throttle. Unit: uncore_imc]
uncore_imc_2/event=0x86/ MetricName: power_critical_throttle_cycles % MetricExpr: (unc_m_power_critical_throttle_cycles / unc_m_clockticks) * 100.
after
perf list --details
...
unc_m_power_critical_throttle_cycles
[Cycles all ranks are in critical thermal throttle. Unit: uncore_imc]
uncore_imc_2/event=0x86/ MetricName: power_critical_throttle_cycles % MetricExpr: (unc_m_power_critical_throttle_cycles / unc_m_clockticks) * 100.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: http://lkml.kernel.org/r/20170320201711.14142-14-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add support for a new JSON event attribute to name MetricExpr for better
output in perf stat.
If the event has no MetricName it uses the normal event name instead to
describe the metric.
Before
% perf stat -a -I 1000 -e '{unc_p_clockticks,unc_p_freq_max_os_cycles}' --metric-only
time unc_p_freq_max_os_cycles
1.000149775 15.7
2.000344807 19.3
3.000502544 16.7
4.000640656 6.6
5.000779955 9.9
After
% perf stat -a -I 1000 -e '{unc_p_clockticks,unc_p_freq_max_os_cycles}' --metric-only
time freq_max_os_cycles %
1.000149775 15.7
2.000344807 19.3
3.000502544 16.7
4.000640656 6.6
5.000779955 9.9
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170320201711.14142-13-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Output the metric expr in perf list when --debug is specified, so that
the user can check the formula.
Before:
% perf list
...
unc_m_power_channel_ppd
[Cycles where DRAM ranks are in power down (CKE) mode. Derived from unc_m_power_channel_ppd. Unit:
uncore_imc]
uncore_imc_2/event=0x85/
After:
% perf list --debug
...
unc_m_power_channel_ppd
[Cycles where DRAM ranks are in power down (CKE) mode. Derived from unc_m_power_channel_ppd. Unit:
uncore_imc]
Perf: uncore_imc_2/event=0x85/ MetricExpr: (unc_m_power_channel_ppd / unc_m_clockticks) * 100.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170320201711.14142-12-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add generic infrastructure to perf stat to output ratios for
"MetricExpr" entries in the event lists. Many events are more useful as
ratios than in raw form, typically some count in relation to total
ticks.
Transfer the MetricExpr information from the alias to the evsel.
We mark the events that need to be collected for MetricExpr, and also
link the events using them with a pointer. The code is careful to always
prefer the right event in the same group to minimize multiplexing
errors. At the moment only a single relation is supported.
Then add a rblist to the stat shadow code that remembers stats based on
the cpu and context.
Then finally update and retrieve and print these values similarly to the
existing hardcoded perf metrics. We use the simple expression parser
added earlier to evaluate the expression.
Normally we just output the result without further commentary, but for
--metric-only this would lead to empty columns. So for this case use the
original event as description.
There is no attempt to automatically add the MetricExpr event, if it is
missing, however we suggest it to the user, because the user tool
doesn't have enough information to reliably construct a group that is
guaranteed to schedule. So we leave that to the user.
% perf stat -a -I 1000 -e '{unc_p_clockticks,unc_p_freq_max_os_cycles}'
1.000147889 800,085,181 unc_p_clockticks
1.000147889 93,126,241 unc_p_freq_max_os_cycles # 11.6
2.000448381 800,218,217 unc_p_clockticks
2.000448381 142,516,095 unc_p_freq_max_os_cycles # 17.8
3.000639852 800,243,057 unc_p_clockticks
3.000639852 162,292,689 unc_p_freq_max_os_cycles # 20.3
% perf stat -a -I 1000 -e '{unc_p_clockticks,unc_p_freq_max_os_cycles}' --metric-only
# time freq_max_os_cycles %
1.000127077 0.9
2.000301436 0.7
3.000456379 0.0
v2: Change from DivideBy to MetricExpr
v3: Use expr__ prefix. Support more than one other event.
v4: Update description
v5: Only print warning message once for multiple PMUs.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170320201711.14142-11-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add support for parsing the MetricExpr header in the JSON event lists
and storing them in the alias structure.
Used in the next patch.
v2: Change DividedBy to MetricExpr
v3: Really catch all uses of DividedBy
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170320201711.14142-10-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a simple expression parser good enough to parse JSON relation
expressions. The parser is implemented using bison.
This is just intended as an simple parser for internal usage in the
event lists, not the beginning of a "perf scripting language"
v2: Use expr__ prefix instead of expr_
Support multiple free variables for parser
Committer note:
The v2 patch had:
%define api.pure full
In expr.y, that is a feature introduced in bison 2.7, to have reentrant
parsers, not using global variables, which would make tools/perf stop
building with the bison version shipped in older distros, so Andi
realised that the other parsers (e.g. parse-events.y) were using:
%pure-parser
Which is present in older versions of bison and fits the bill.
I added:
CFLAGS_expr-bison.o += -DYYENABLE_NLS=0 -DYYLTYPE_IS_TRIVIAL=0 -w
To finally make it build, copying what was there for pmu-bison.o,
another parser.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170320201711.14142-8-andi@firstfloor.org
[ stdlib.h is needed in tests/expr.c for free() fixing build in systems such as ubuntu:16.04-x-s390 ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Special case uncore_ prefix in PMU match, to allow for shorter event
uncore specifications.
Before:
perf stat -a -e uncore_cbox/event=0x35,umask=0x1,filter_opc=0x19C/ sleep 1
After
perf stat -a -e cbox/event=0x35,umask=0x1,filter_opc=0x19C/ sleep 1
Committer tests:
# perf list uncore
List of pre-defined events (to be used in -e):
uncore_cbox_0/clockticks/ [Kernel PMU event]
uncore_cbox_1/clockticks/ [Kernel PMU event]
uncore_imc/data_reads/ [Kernel PMU event]
uncore_imc/data_writes/ [Kernel PMU event]
# perf stat -a -e cbox_0/clockticks/ sleep 1
Performance counter stats for 'system wide':
281,474,976,653,084 cbox_0/clockticks/
1.000870129 seconds time elapsed
#
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: http://lkml.kernel.org/r/20170320201711.14142-7-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When the user specifies a pmu directly, expand it automatically with a
prefix match for all available PMUs, similar as we do for the normal
aliases now.
This allows to specify attributes for duplicated boxes quickly. For
example uncore_cbox_{0,6}/.../ can be now specified as uncore_cbox/.../
and it gets automatically expanded for all boxes.
This generally makes it more concise to write uncore specifications, and
also avoids the need to know the exact topology of the system.
Before:
% perf stat -a -e uncore_cbox_0/event=0x35,umask=0x1,filter_opc=0x19C/,\
uncore_cbox_1/event=0x35,umask=0x1,filter_opc=0x19C/,\
uncore_cbox_2/event=0x35,umask=0x1,filter_opc=0x19C/,\
uncore_cbox_3/event=0x35,umask=0x1,filter_opc=0x19C/,\
uncore_cbox_4/event=0x35,umask=0x1,filter_opc=0x19C/,\
uncore_cbox_5/event=0x35,umask=0x1,filter_opc=0x19C/ sleep 1
After:
% perf stat -a -e uncore_cbox/event=0x35,umask=0x1,filter_opc=0x19C/ sleep 1
v2: Handle all bison rules. Move multi add code to separate function.
Handle uncore_ prefix correctly.
v3: Move parse_events_multi_pmu_add to separate patch. Move uncore
prefix check to separate patch.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170320201711.14142-6-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Factor out the PMU name matching in the event parser into a separate
function, to use the same code for other grammar rules later.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170320201711.14142-5-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When any result that is being merged is bad, mark them all bad to give
consistent output in interval mode.
No before/after, because the issue was only found in theoretical review
and it is hard to reproduce
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170320201711.14142-4-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The uncore PMU has a lot of duplicated PMUs for different subsystems.
When expanding an uncore alias we usually end up with a large
number of identically named aliases, which makes perf stat
output difficult to read.
Automatically sum them up in perf stat, unless --no-merge is specified.
This can be default because only the uncores generally have duplicated
aliases. Other PMUs have unique names.
Before:
% perf stat --no-merge -a -e unc_c_llc_lookup.any sleep 1
Performance counter stats for 'system wide':
694,976 Bytes unc_c_llc_lookup.any
706,304 Bytes unc_c_llc_lookup.any
956,608 Bytes unc_c_llc_lookup.any
782,720 Bytes unc_c_llc_lookup.any
605,696 Bytes unc_c_llc_lookup.any
442,816 Bytes unc_c_llc_lookup.any
659,328 Bytes unc_c_llc_lookup.any
509,312 Bytes unc_c_llc_lookup.any
263,936 Bytes unc_c_llc_lookup.any
592,448 Bytes unc_c_llc_lookup.any
672,448 Bytes unc_c_llc_lookup.any
608,640 Bytes unc_c_llc_lookup.any
641,024 Bytes unc_c_llc_lookup.any
856,896 Bytes unc_c_llc_lookup.any
808,832 Bytes unc_c_llc_lookup.any
684,864 Bytes unc_c_llc_lookup.any
710,464 Bytes unc_c_llc_lookup.any
538,304 Bytes unc_c_llc_lookup.any
1.002577660 seconds time elapsed
After:
% perf stat -a -e unc_c_llc_lookup.any sleep 1
Performance counter stats for 'system wide':
2,685,120 Bytes unc_c_llc_lookup.any
1.002648032 seconds time elapsed
v2: Split collect_aliases. Rename alias flag.
v3: Make sure unsupported/not counted is always printed.
v4: Factor out callback change into separate patch.
v5: Move check for bad results here
Move merged check into collect_data
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170320201711.14142-3-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To be used in next patch to support automatic summing of alias events.
v2: Move check for bad results to next patch
v3: Remove trivial addition.
v4: Use perf_evsel__cpus instead of evsel->cpus
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170320201711.14142-2-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The source code line number (lineno) needs to be kept in accross calls
to symbol__parse_objdump_line() when parsing the output of 'objdump -l
-dS', so that it can associate it with the instructions till the next
line.
See disasm_line__new() and struct disasm_line::line_nr.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-7hpx8f8ybdpiujceysaj229w@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'grep -v "filename"' applied to the objdump command output cause a
side effect eliminating filename:linenr of output of 'objdump -l' if the
object file name and source file name are the same, fix it.
E.g. the output of the following objdump command in symbol__disassemble():
$ objdump -l -d -S -C /home/taeung/hello --start-address=...
/home/taeung/hello: file format elf64-x86-64
Disassembly of section .text:
0000000000400526 <main>:
main():
/home/taeung/hello.c:4
void main()
{
400526: 55 push %rbp
400527: 48 89 e5 mov %rsp,%rbp
/home/taeung/hello.c:5
...
But it uses grep -v "filename" e.g. "/home/taeung/hello" in the objdump
command to remove the first line containing file name and file format
("/home/taeung/hello: file format elf64-x86-64"):
Before:
$ objdump -l -d -S -C /home/taeung/hello | grep /home/taeung/hello
But this causes a side effect, removing filename:linenr too, because the
object file and source file have the same name e.g. "/home/taueng/hello",
"/home/taeung/hello.c"
So more do a better match by using grep -v as below to correctly remove
that first line:
"/home/taeung/hello: file format elf64-x86-64"
After:
$ objdump -l -d -S -C /home/taeung/hello | grep /home/taeung/hello:
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1489978617-31396-5-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
An sdt probe can be associated with arguments but they were not passed
to the user probe tracing interface (uprobe_events); this patch adapts
the sdt argument descriptors according to the uprobe input format.
As the uprobe parser does not support scaled address mode, perf will
skip arguments which cannot be adapted to the uprobe format.
Here are the results:
$ perf buildid-cache -v --add test_sdt
$ perf probe -x test_sdt sdt_libfoo:table_frob
$ perf probe -x test_sdt sdt_libfoo:table_diddle
$ perf record -e sdt_libfoo:table_frob -e sdt_libfoo:table_diddle test_sdt
$ perf script
test_sdt ... 666.255678: sdt_libfoo:table_frob: (4004d7) arg0=0 arg1=0
test_sdt ... 666.255683: sdt_libfoo:table_diddle: (40051a) arg0=0 arg1=0
test_sdt ... 666.255686: sdt_libfoo:table_frob: (4004d7) arg0=1 arg1=2
test_sdt ... 666.255689: sdt_libfoo:table_diddle: (40051a) arg0=3 arg1=4
test_sdt ... 666.255692: sdt_libfoo:table_frob: (4004d7) arg0=2 arg1=4
test_sdt ... 666.255694: sdt_libfoo:table_diddle: (40051a) arg0=6 arg1=8
Signed-off-by: Alexis Berlemont <alexis.berlemont@gmail.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20161214000732.1710-3-alexis.berlemont@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
During a "perf buildid-cache --add" command, the section ".note.stapsdt"
of the "added" binary is scanned in order to list the available SDT
markers available in a binary. The parts containing the probes arguments
were left unscanned.
The whole section is now parsed; the probe arguments are extracted for
later use.
Signed-off-by: Alexis Berlemont <alexis.berlemont@gmail.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20161214000732.1710-2-alexis.berlemont@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
On old perf, when using 'perf probe -d' to delete an inexistent event,
it returns errno, eg,
-bash-4.3# perf probe -d xxx || echo $?
Info: Event "*:xxx" does not exist.
Error: Failed to delete events.
255
But now perf_del_probe_events() will always set ret = 0, different from
previous del_perf_probe_events(). After this, it returns errno again,
eg,
-bash-4.3# ./perf probe -d xxx || echo $?
"xxx" does not hit any event.
Error: Failed to delete events.
254
And it is more appropriate to return -ENOENT instead of -EPERM.
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: dddc7ee32f ("perf probe: Fix an error when deleting probes successfully")
Link: http://lkml.kernel.org/r/1489738592-61011-1-git-send-email-wangkefeng.wang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There are many SDT markers in powerpc whose uprobe definition goes
beyond current MAX_CMDLEN, especially when target filename is long and
sdt marker has long list of arguments. For example, definition of sdt
marker
method__compile__end: 8@17 8@9 8@10 -4@8 8@7 -4@6 8@5 -4@4 1@37(28)
from file
/usr/lib/jvm/java-1.8.0-openjdk-1.8.0.91-2.b14.fc22.ppc64/jre/lib/ppc64/server/libjvm.so
is
p:sdt_hotspot/method__compile__end /usr/lib/jvm/java-1.8.0-openjdk-\
1.8.0.91-2.b14.fc22.ppc64/jre/lib/ppc64/server/libjvm.so:0x4c4e00\
arg1=%gpr17:u64 arg2=%gpr9:u64 arg3=%gpr10:u64 arg4=%gpr8:s32\
arg5=%gpr7:u64 arg6=%gpr6:s32 arg7=%gpr5:u64 arg8=%gpr4:s32\
arg9=+37(%gpr28):u8
'perf probe' fails with segfault for such markers. As the uprobe_events
file accepts definitions up to 4094 characters(4096 - 2 (\n\0)),
increase value of MAX_CMDLEN match that.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexis Berlemont <alexis.berlemont@gmail.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170207054547.3690-1-ravi.bangoria@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
'*ntevs' contains number of elements present in 'tevs' array. If there
are no elements in array, 'tevs2' can be directly assigned to 'tevs'
without allocating more space. So the condition should be '*ntevs == 0'
not 'ntevs == 0'.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: 42bba263eb ("perf probe: Allow wildcard for cached events")
Link: http://lkml.kernel.org/r/20170308065908.4128-1-ravi.bangoria@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Description of --no-aggr in perf-stat man page is outdated. --no-aggr
can also be used while profiling specific set of cpus. For ex,
$ perf stat -e cycles,instructions -C 1-2 --no-aggr -- sleep 1
Performance counter stats for 'CPU(s) 1-2':
CPU1 5,94,92,795 cycles
CPU2 2,69,72,403 cycles
CPU1 2,02,08,327 instructions # 0.34 insn per cycle
CPU2 73,17,123 instructions # 0.12 insn per cycle
1.000989132 seconds time elapsed
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1490013438-5713-1-git-send-email-ravi.bangoria@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull perf fixes from Thomas Gleixner:
"A set of perf related fixes:
- fix a CR4.PCE propagation issue caused by usage of mm instead of
active_mm and therefore propagated the wrong value.
- perf core fixes, which plug a use-after-free issue and make the
event inheritance on fork more robust.
- a tooling fix for symbol handling"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf symbols: Fix symbols__fixup_end heuristic for corner cases
x86/perf: Clarify why x86_pmu_event_mapped() isn't racy
x86/perf: Fix CR4.PCE propagation to use active_mm instead of mm
perf/core: Better explain the inherit magic
perf/core: Simplify perf_event_free_task()
perf/core: Fix event inheritance on fork()
perf/core: Fix use-after-free in perf_release()
This patch decodes the 'partial' flag in AUX records and prints
a warning to the user, so that they don't have to guess why their
PT traces contain gaps (or missing altogether):
Warning:
AUX data had gaps in it 8 times out of 8!
Are you running a KVM guest in the background?
Trying to be even more helpful, we will detect if the user's kvm driver sets up
exclusive VMX root mode for the entire lifespan of the kvm process:
Reloading kvm_intel module with vmm_exclusive=0
will reduce the gaps to only guest's timeslices.
Note however, that you'll still have gaps in cpu-wide traces even with
vmm_exclusive=0, but the number of gaps will be below 100% (as opposed to the
above example).
Currently this is the only reason for partial records.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vince Weaver <vince@deater.net>
Link: http://lkml.kernel.org/r/8760j941ig.fsf@ashishki-desk.ger.corp.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move -T/--tasks-only and -P/--power-only options to a separate options
array that then gets referenced via OPT_PARENT from the 'perf timechart'
and 'perf timechart record' option arrays.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Changbin Du <changbin.du@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-j80lol9wj1i6556ibh48iebe@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
All options need the -f/--force option, so move it to the array
referenced via OPT_PARENT.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Changbin Du <changbin.du@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-unbeionpi58rioh4e9w8kp4n@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When I use -i option for report subcommand, it doesn't accept it. We
need add common options using OPT_PARENT macro.
perf lock report -i lock_perf.data
Error: unknown switch `i'
Usage: perf lock report [<options>]
-f, --force don't complain, do it
-k, --key <acquired> key for sorting ...
Signed-off-by: Changbin Du <changbin.du@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170317055342.8284-1-changbin.du@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The current symbols__fixup_end() heuristic for the last entry in the rb
tree is suboptimal as it leads to not being able to recognize the symbol
in the call graph in a couple of corner cases, for example:
i) If the symbol has a start address (f.e. exposed via kallsyms)
that is at a page boundary, then the roundup(curr->start, 4096)
for the last entry will result in curr->start == curr->end with
a symbol length of zero.
ii) If the symbol has a start address that is shortly before a page
boundary, then also here, curr->end - curr->start will just be
very few bytes, where it's unrealistic that we could perform a
match against.
Instead, change the heuristic to roundup(curr->start, 4096) + 4096, so
that we can catch such corner cases and have a better chance to find
that specific symbol. It's still just best effort as the real end of the
symbol is unknown to us (and could even be at a larger offset than the
current range), but better than the current situation.
Alexei reported that he recently run into case i) with a JITed eBPF
program (these are all page aligned) as the last symbol which wasn't
properly shown in the call graph (while other eBPF program symbols in
the rb tree were displayed correctly). Since this is a generic issue,
lets try to improve the heuristic a bit.
Reported-and-Tested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Fixes: 2e538c4a18 ("perf tools: Improve kernel/modules symbol lookup")
Link: http://lkml.kernel.org/r/bb5c80d27743be6f12afc68405f1956a330e1bc9.1489614365.git.daniel@iogearbox.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
New features:
- Add 'brstackinsn' field in 'perf script' to reuse the x86 instruction
decoder used in the Intel PT code to study hot paths to samples (Andi Kleen)
Kernel:
- Default UPROBES_EVENTS to Y (Alexei Starovoitov)
- Fix check for kretprobe offset within function entry (Naveen N. Rao)
Infrastructure:
- Introduce util func is_sdt_event() (Ravi Bangoria)
- Make perf_event__synthesize_mmap_events() scale on older kernels where
reading /proc/pid/maps is way slower than reading /proc/pid/task/pid/maps (Stephane Eranian)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=Bg5M
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo-4.12-20170316' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
New features:
- Add 'brstackinsn' field in 'perf script' to reuse the x86 instruction
decoder used in the Intel PT code to study hot paths to samples (Andi Kleen)
Kernel changes:
- Default UPROBES_EVENTS to Y (Alexei Starovoitov)
- Fix check for kretprobe offset within function entry (Naveen N. Rao)
Infrastructure changes:
- Introduce util func is_sdt_event() (Ravi Bangoria)
- Make perf_event__synthesize_mmap_events() scale on older kernels where
reading /proc/pid/maps is way slower than reading /proc/pid/task/pid/maps (Stephane Eranian)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Implement printing instruction sequences as hex dump for branch stacks.
This relies on the x86 instruction decoder used by the PT decoder to
find the lengths of instructions to dump them individually.
This is good enough for pattern matching.
This allows to study hot paths for individual samples, together with
branch misprediction and cycle count / IPC information if available (on
Skylake systems).
% perf record -b ...
% perf script -F brstackinsn
...
read_hpet+67:
ffffffff9905b843 insn: 74 ea # PRED
ffffffff9905b82f insn: 85 c9
ffffffff9905b831 insn: 74 12
ffffffff9905b833 insn: f3 90
ffffffff9905b835 insn: 48 8b 0f
ffffffff9905b838 insn: 48 89 ca
ffffffff9905b83b insn: 48 c1 ea 20
ffffffff9905b83f insn: 39 f2
ffffffff9905b841 insn: 89 d0
ffffffff9905b843 insn: 74 ea # PRED
Only works when no special branch filters are specified.
Occasionally the path does not reach up to the sample IP, as the LBRs
may be frozen before executing a final jump. In this case we print a
special message.
The instruction dumper piggy backs on the existing infrastructure from
the IP PT decoder.
An earlier iteration of this patch relied on a disassembler, but this
version only uses the existing instruction decoder.
Committer note:
Added hint about how to get suitable perf.data files for use with
'-F brstackinsm':
$ perf record usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.018 MB perf.data (8 samples) ]
$
$ perf script -F brstackinsn
Display of branch stack assembler requested, but non all-branch filter set
Hint: run 'perf record -b ...'
$
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Link: http://lkml.kernel.org/r/20170223234634.583-1-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch significantly improves the execution time of
perf_event__synthesize_mmap_events() when running perf record on systems
where processes have lots of threads.
It just happens that cat /proc/pid/maps support uses a O(N^2) algorithm to
generate each map line in the maps file. If you have 1000 threads, then you
have necessarily 1000 stacks. For each vma, you need to check if it
corresponds to a thread's stack. With a large number of threads, this can take
a very long time. I have seen latencies >> 10mn.
As of today, perf does not use the fact that a mapping is a stack, therefore we
can work around the issue by using /proc/pid/tasks/pid/maps. This entry does
not try to map a vma to stack and is thus much faster with no loss of
functonality.
The proc-map-timeout logic is kept in case users still want some upper limit.
In V2, we fix the file path from /proc/pid/tasks/pid/maps to actual
/proc/pid/task/pid/maps, tasks -> task. Thanks Arnaldo for catching this.
Committer note:
This problem seems to have been elliminated in the kernel since commit :
b18cb64ead ("fs/proc: Stop trying to report thread stacks").
Signed-off-by: Stephane Eranian <eranian@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170315135059.GC2177@redhat.com
Link: http://lkml.kernel.org/r/1489598233-25586-1-git-send-email-eranian@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf now uses an offset from _text/_stext for kretprobes if the kernel
supports it, rather than the actual function name. As such, let's choose
the LEP for powerpc ABIv2 so as to ensure the probe gets hit. Do it only
if the kernel supports specifying offsets with kretprobes.
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/7445b5334673ef5404ac1d12609bad4d73d2b567.1488961018.git.naveen.n.rao@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We indicate support for accepting sym+offset with kretprobes through a
line in ftrace README. Parse the same to identify support and choose the
appropriate format for kprobe_events.
As an example, without this perf patch, but with the ftrace changes:
naveen@ubuntu:~/linux/tools/perf$ sudo cat /sys/kernel/debug/tracing/README | grep kretprobe
place (kretprobe): [<module>:]<symbol>[+<offset>]|<memaddr>
naveen@ubuntu:~/linux/tools/perf$
naveen@ubuntu:~/linux/tools/perf$ sudo ./perf probe -v do_open%return
probe-definition(0): do_open%return
symbol:do_open file:(null) line:0 offset:0 return:1 lazy:(null)
0 arguments
Looking at the vmlinux_path (8 entries long)
Using /boot/vmlinux for symbols
Open Debuginfo file: /boot/vmlinux
Try to find probe point from debuginfo.
Matched function: do_open [2d0c7d8]
Probe point found: do_open+0
Matched function: do_open [35d76b5]
found inline addr: 0xc0000000004ba984
Failed to find "do_open%return",
because do_open is an inlined function and has no return point.
An error occurred in debuginfo analysis (-22).
Trying to use symbols.
Opening /sys/kernel/debug/tracing//kprobe_events write=1
Writing event: r:probe/do_open do_open+0
Writing event: r:probe/do_open_1 do_open+0
Added new events:
probe:do_open (on do_open%return)
probe:do_open_1 (on do_open%return)
You can now use it in all perf tools, such as:
perf record -e probe:do_open_1 -aR sleep 1
naveen@ubuntu:~/linux/tools/perf$ sudo cat /sys/kernel/debug/kprobes/list
c000000000041370 k kretprobe_trampoline+0x0 [OPTIMIZED]
c0000000004433d0 r do_open+0x0 [DISABLED]
c0000000004433d0 r do_open+0x0 [DISABLED]
And after this patch (and the subsequent powerpc patch):
naveen@ubuntu:~/linux/tools/perf$ sudo ./perf probe -v do_open%return
probe-definition(0): do_open%return
symbol:do_open file:(null) line:0 offset:0 return:1 lazy:(null)
0 arguments
Looking at the vmlinux_path (8 entries long)
Using /boot/vmlinux for symbols
Open Debuginfo file: /boot/vmlinux
Try to find probe point from debuginfo.
Matched function: do_open [2d0c7d8]
Probe point found: do_open+0
Matched function: do_open [35d76b5]
found inline addr: 0xc0000000004ba984
Failed to find "do_open%return",
because do_open is an inlined function and has no return point.
An error occurred in debuginfo analysis (-22).
Trying to use symbols.
Opening /sys/kernel/debug/tracing//README write=0
Opening /sys/kernel/debug/tracing//kprobe_events write=1
Writing event: r:probe/do_open _text+4469712
Writing event: r:probe/do_open_1 _text+4956248
Added new events:
probe:do_open (on do_open%return)
probe:do_open_1 (on do_open%return)
You can now use it in all perf tools, such as:
perf record -e probe:do_open_1 -aR sleep 1
naveen@ubuntu:~/linux/tools/perf$ sudo cat /sys/kernel/debug/kprobes/list
c000000000041370 k kretprobe_trampoline+0x0 [OPTIMIZED]
c0000000004433d0 r do_open+0x0 [DISABLED]
c0000000004ba058 r do_open+0x8 [DISABLED]
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/496ef9f33c1ab16286ece9dd62aa672807aef91c.1488961018.git.naveen.n.rao@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Simplify and separate out the ftrace README scanning logic into a
separate helper. This is used subsequently to scan for all patterns of
interest and to cache the result.
Since we are only interested in availability of probe argument type x,
we will only scan for that.
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/6dc30edc747ba82a236593be6cf3a046fa9453b5.1488961018.git.naveen.n.rao@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch introduces a cgroup identifier entry field in perf report to
identify or distinguish data of different cgroups. It uses the device
number and inode number of cgroup namespace, included in perf data with
the new PERF_RECORD_NAMESPACES event, as cgroup identifier.
With the assumption that each container is created with it's own cgroup
namespace, this allows assessment/analysis of multiple containers at
once.
A simple test for this would be to clone a few processes passing
SIGCHILD & CLONE_NEWCROUP flags to each of them, execute shell and run
different workloads on each of those contexts, while running perf
record command with --namespaces option.
Shown below is the output of perf report, sorted with cgroup identifier,
on perf.data generated with the above test scenario, clearly indicating
one context's considerable use of kernel memory in comparison with
others:
$ perf report -s cgroup_id,sample --stdio
#
# Total Lost Samples: 0
#
# Samples: 5K of event 'kmem:kmalloc'
# Event count (approx.): 5965
#
# Overhead cgroup id (dev/inode) Samples
# ........ ..................... ............
#
81.27% 3/0xeffffffb 4848
16.24% 3/0xf00000d0 969
1.16% 3/0xf00000ce 69
0.82% 3/0xf00000cf 49
0.50% 0/0x0 30
While this is a start, there is further scope of improving this. For
example, instead of cgroup namespace's device and inode numbers, dev
and inode numbers of some or all namespaces may be used to distinguish
which processes are running in a given container context.
Also, scripts to map device and inode info to containers sounds
plausible for better tracing of containers.
Signed-off-by: Hari Bathini <hbathini@linux.vnet.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Aravinda Prasad <aravinda@linux.vnet.ibm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sargun Dhillon <sargun@sargun.me>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/148891933338.25309.756882900782042645.stgit@hbathini.in.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Introduce a new option to record PERF_RECORD_NAMESPACES events emitted
by the kernel when fork, clone, setns or unshare are invoked. And update
perf-record documentation with the new option to record namespace
events.
Committer notes:
Combined it with a later patch to allow printing it via 'perf report -D'
and be able to test the feature introduced in this patch. Had to move
here also perf_ns__name(), that was introduced in another later patch.
Also used PRIu64 and PRIx64 to fix the build in some enfironments wrt:
util/event.c:1129:39: error: format '%lx' expects argument of type 'long unsigned int', but argument 6 has type 'long long unsigned int' [-Werror=format=]
ret += fprintf(fp, "%u/%s: %lu/0x%lx%s", idx
^
Testing it:
# perf record --namespaces -a
^C[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 1.083 MB perf.data (423 samples) ]
#
# perf report -D
<SNIP>
3 2028902078892 0x115140 [0xa0]: PERF_RECORD_NAMESPACES 14783/14783 - nr_namespaces: 7
[0/net: 3/0xf0000081, 1/uts: 3/0xeffffffe, 2/ipc: 3/0xefffffff, 3/pid: 3/0xeffffffc,
4/user: 3/0xeffffffd, 5/mnt: 3/0xf0000000, 6/cgroup: 3/0xeffffffb]
0x1151e0 [0x30]: event: 9
.
. ... raw event: size 48 bytes
. 0000: 09 00 00 00 02 00 30 00 c4 71 82 68 0c 7f 00 00 ......0..q.h....
. 0010: a9 39 00 00 a9 39 00 00 94 28 fe 63 d8 01 00 00 .9...9...(.c....
. 0020: 03 00 00 00 00 00 00 00 ce c4 02 00 00 00 00 00 ................
<SNIP>
NAMESPACES events: 1
<SNIP>
#
Signed-off-by: Hari Bathini <hbathini@linux.vnet.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Aravinda Prasad <aravinda@linux.vnet.ibm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sargun Dhillon <sargun@sargun.me>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/148891930386.25309.18412039920746995488.stgit@hbathini.in.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit 2f3f9bcf00 ("perf tools: Add +field argument support for
--field option") by Jiri Olsa <jolsa@kernel.org> introduced +field style
argument support for --field option.
This is useful but not updated documentation. This add a little
description there.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170313083252.23644-1-changbin.du@intel.com
[ Slightly improved the phrase structure ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Skip the sample which doesn't have branch_info to avoid segmentation
fault:
The fault can be reproduced by:
perf record -a
perf report -F cycles
Signed-off-by: Changbin Du <changbin.du@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: 0e332f033a ("perf tools: Add support for cycles, weight branch_info field")
Link: http://lkml.kernel.org/r/20170313083148.23568-1-changbin.du@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ignore two files: pmu-events/{jevents,pmu-events.c} which are generated
during the build.
Committer notes:
Testing it:
$ make -C tools/perf/
$ git status
On branch perf/core
Untracked files:
(use "git add <file>..." to include in what will be committed)
tools/perf/pmu-events/jevents
tools/perf/pmu-events/pmu-events.c
nothing added to commit but untracked files present (use "git add" to track)
$
After the patch:
$ git status
On branch perf/core
nothing to commit, working tree clean
$
Signed-off-by: Changbin Du <changbin.du@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170313083026.23487-1-changbin.du@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add the c2c command to command-list.txt so perf help can list this
command.
Committer notes:
Before:
# perf help | grep c2c
#
After:
# perf help | grep c2c
c2c Shared Data C2C/HITM Analyzer.
#
Signed-off-by: Changbin Du <changbin.du@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170313082845.23373-1-changbin.du@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently 'perf c2c report' determines display mode using the --stdio
option, but it could be a problem if stdout is not a tty since
setup_browser falls back to stdio in this case.
But perf c2c didn't know this and tried to use TUI browser anyway. It
should check "use_browser" variable instead.
For example, the following command showed nothing and broke terminal
setting. Now it's fixed..
$ perf c2c report | head
=================================================
Trace Event Information
=================================================
Total records : 136
Locked Load/Store Operations : 6
Load Operations : 62
Loads - uncacheable : 0
Loads - IO : 1
Loads - Miss : 7
Loads - no mapping : 2
Committer notes:
When trying it without a proper perf.data file it results in a stuck
terminal, just as Namhyung reported above:
[acme@jouet ~]$ perf c2c report | head
WARNING: no sample cpu value[acme@jouet ~]$
One has to kill it from some other xterm. Confirm that this patch fixes
it:
After:
$ perf c2c report | head
WARNING: no sample cpu value=================================================
Trace Event Information
=================================================
Total records : 14
Locked Load/Store Operations : 0
Load Operations : 0
Loads - uncacheable : 0
Loads - IO : 0
Loads - Miss : 0
Loads - no mapping : 0
$
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20170307150851.22304-6-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As it is not strictly asking for only stdio output, but will imply using
it.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20170307150851.22304-5-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The tip message at the end was printed regardless of the -q option.
Originally, the message suggested only '-s comm,dso' option for higher
level view when no sort option and parent option were given.
Now it shows random help message regardless of the options so the
condition can be simplified to honor the -q option.
Committer notes:
Before:
$ perf report --stdio -q
42.77% ls ls [.] _init
13.21% ls ld-2.24.so [.] match_symbol
12.55% ls libc-2.24.so [.] __strcoll_l
11.94% ls libc-2.24.so [.] _init
#
# (Tip: Show current config key-value pairs: perf config --list)
#
$
After:
$ perf report --stdio -q
42.77% ls ls [.] _init
13.21% ls ld-2.24.so [.] match_symbol
12.55% ls libc-2.24.so [.] __strcoll_l
11.94% ls libc-2.24.so [.] _init
$
We still have those two extra lines tho (that git commit insists in
turning into one, or git commit --amend doesn't make me add), food for
another patch...
Reported-and-Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20170307150851.22304-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding more commentary for -c/--show_convergence option, to explain how
the convergence is defined.
Before:
-c, --show_convergence
show convergence details
Now:
-c, --show_convergence
convergence is reached when each process \
(all its threads) is running on a single NUMA node.
Suggested--by: Jiri Hladky <jhladky@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Hladky <jhladky@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1488732011-27384-1-git-send-email-jolsa@kernel.org
[ Rephrased a bit based on a IRC conversation with Jiri ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When building with clang on a musl libc system, Alpine Linux, we end up
hitting a problem where memset() is used but its prototype is not
present, add it to avoid this:
bench/futex-wake.c:99:3: error: implicitly declaring library function 'memset' with type 'void *(void *, int, unsigned long)'
[-Werror,-Wimplicit-function-declaration]
CPU_ZERO(&cpu);
^
/usr/include/sched.h:127:23: note: expanded from macro 'CPU_ZERO'
#define CPU_ZERO(set) CPU_ZERO_S(sizeof(cpu_set_t),set)
^
/usr/include/sched.h:110:30: note: expanded from macro 'CPU_ZERO_S'
#define CPU_ZERO_S(size,set) memset(set,0,size)
^
bench/futex-wake.c:99:3: note: include the header <string.h> or explicitly provide a declaration for 'memset'
Found while updating my test build containers to build perf with clang in more
systems.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-jh10vaz2r98zl6gm5iau8prr@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Instead of attributing a variable to itself to silence the compiler, use
the attribute designed for that, avoiding this:
In file included from bench/futex-hash.c:24:
bench/futex.h:95:7: error: explicitly assigning value of variable of type 'pthread_attr_t *' to itself [-Werror,-Wself-assign]
attr = attr;
~~~~ ^ ~~~~
bench/futex.h:96:13: error: explicitly assigning value of variable of type 'size_t' (aka 'unsigned long') to itself [-Werror,-Wself-assign]
cpusetsize = cpusetsize;
~~~~~~~~~~ ^ ~~~~~~~~~~
bench/futex.h:97:9: error: explicitly assigning value of variable of type 'cpu_set_t *' (aka 'struct cpu_set_t *') to itself [-Werror,-Wself-assign]
cpuset = cpuset;
~~~~~~ ^ ~~~~~~
That is only triggered when HAVE_PTHREAD_ATTR_SETAFFINITY_NP isn't set.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-14ws1d1elj2d5ej8g7cwdqau@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Instead of trying to go on adding more ifdef conditions, do a feature
test and define HAVE_SCHED_GETCPU_SUPPORT instead, then use it to
provide the prototype. No need to change the stub, as it is already a
__weak symbol.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-yge89er9g90sc0v6k0a0r5tr@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Make system wide (-a) the default option if no target was specified and
one of following conditions is met:
- there's no workload specified (current behaviour)
- there is workload specified but all requested
events are system wide ones
Mixed events core/uncore with workload:
$ perf stat -e 'uncore_cbox_0/clockticks/,cycles' sleep 1
Performance counter stats for 'sleep 1':
<not supported> uncore_cbox_0/clockticks/
980,489 cycles
1.000897406 seconds time elapsed
Uncore event with workload:
$ perf stat -e 'uncore_cbox_0/clockticks/' sleep 1
Performance counter stats for 'system wide':
281,473,897,192,670 uncore_cbox_0/clockticks/
1.000833784 seconds time elapsed
Committer note:
When testing I realized the default case for !root, i.e. no events
passed via -e, was broke by v2 of this patch, reported and after a
patch provided by Jiri it is back working:
[acme@jouet linux]$ perf stat usleep 1
Performance counter stats for 'usleep 1':
0.401335 task-clock:u (msec) # 0.297 CPUs utilized
0 context-switches:u # 0.000 K/sec
0 cpu-migrations:u # 0.000 K/sec
48 page-faults:u # 0.120 M/sec
458,146 cycles:u # 1.142 GHz
245,113 instructions:u # 0.54 insn per cycle
47,991 branches:u # 119.578 M/sec
4,022 branch-misses:u # 8.38% of all branches
0.001350029 seconds time elapsed
[acme@jouet linux]$
Suggested-and-Tested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20170227094818.GA12764@krava
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
$ perf test decoder
57: x86 instruction decoder - new instructions : FAILED!
$
Failed to decode 'rel' value (0xfffffffc vs expected 0): 0f 1b 80 78 56 34 12 bndstx %bnd0,0x12345678(%rax)
Failed to decode 'rel' value (0xfffffffc vs expected 0): 0f 1b 85 78 56 34 12 bndstx %bnd0,0x12345678(%rbp)
Failed to decode 'rel' value (0xfffffffc vs expected 0): 0f 1b 84 01 78 56 34 12 bndstx %bnd0,0x12345678(%rcx,%rax,1)
Failed to decode 'rel' value (0xfffffffc vs expected 0): 0f 1b 84 05 78 56 34 12 bndstx %bnd0,0x12345678(%rbp,%rax,1)
Failed to decode 'rel' value (0xfffffffc vs expected 0): 0f 1b 84 08 78 56 34 12 bndstx %bnd0,0x12345678(%rax,%rcx,1)
There is missing initialization. It only affects the test because it is
checking 'rel' even in cases where there is no value.
Fix it.
Reported-and-Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/08c6ad07-7994-3e56-b20e-d75727ca7765@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It's convenient to use the pager when seeing many lines of result.
Note that setup_pager() should be called after perf_evlist__prepare_workload()
since they can interfere each other regarding shared stdio streams.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20170224011251.14946-4-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The -a/--all-cpus and -C/--cpu option is for controlling tracing cpus.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20170224011251.14946-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The cpu_map__snprint_mask() generates a string representation of a
cpumask bitmap. For cpu 0 to 11, it'll return "fff".
Committer notes:
Fix compiler warning on some toolchains:
19 fedora:24-x-ARC-uClibc: FAIL
CC /tmp/build/perf/util/cpumap.o
util/cpumap.c: In function 'hex_char':
util/cpumap.c:679:2: error: comparison is always true due to limited range of data type [-Werror=type-limits]
if (0 <= val && val <= 9)
^
cc1: all warnings being treated as errors
Applying patch from Namhyung that makes function receive an 'unsigned
char', that is what the callers are passing to this function.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20170224011251.14946-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The -p (--pid) option enables to trace existing process by its pid.
Committer notes:
Testing it:
Using the function_graph tracer on a process that is just waiting for user
input and thus will make 'perf ftrace' sit there waiting for that, then press
any key on that mutt session and see what happens:
# perf ftrace -t function_graph -p `pidof mutt` | head -40
2) 1.038 us | switch_mm_irqs_off();
------------------------------------------
2) <idle>-0 => mutt-3595
------------------------------------------
2) | finish_task_switch() {
2) | smp_irq_work_interrupt() {
2) | irq_enter() {
2) 0.180 us | rcu_irq_enter();
2) 1.248 us | }
2) | __wake_up() {
2) 0.126 us | _raw_spin_lock_irqsave();
2) | __wake_up_common() {
2) | pollwake() {
2) | default_wake_function() {
2) | try_to_wake_up() {
2) 0.662 us | _raw_spin_lock_irqsave();
2) | select_task_rq_fair() {
2) 1.719 us | effective_load.isra.41();
2) 1.343 us | effective_load.isra.41();
2) | select_idle_sibling() {
2) 0.331 us | idle_cpu();
2) 1.458 us | }
2) 8.350 us | }
2) 0.200 us | _raw_spin_lock();
2) | ttwu_do_activate() {
2) | activate_task() {
2) 0.136 us | update_rq_clock.part.77();
2) | enqueue_task_fair() {
2) | enqueue_entity() {
2) 0.146 us | update_curr();
2) 0.330 us | account_entity_enqueue();
2) 0.280 us | update_cfs_shares();
2) 0.321 us | place_entity();
2) 0.206 us | __enqueue_entity();
2) 6.926 us | }
2) | enqueue_entity() {
2) 0.105 us | update_curr();
2) 0.175 us | account_entity_enqueue();
2) 0.531 us | update_cfs_shares();
#
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20170224011251.14946-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add new sort key 'symbol_size' to allow user to sort by symbol size, or
(more usefully) display the symbol size using --fields=...,symbol_size.
Committer note:
Testing it together with the recently added -q, to remove the headers,
and using the '+' sign with -s, to add the symbol_size sort order to
the default, which is '-s/--sort comm,dso,symbol':
# perf report -q -s +symbol_size | head -10
10.39% swapper [kernel.vmlinux] [k] intel_idle 270
3.45% swapper [kernel.vmlinux] [k] update_blocked_averages 1546
2.61% swapper [kernel.vmlinux] [k] update_load_avg 1292
2.36% swapper [kernel.vmlinux] [k] update_cfs_shares 240
1.83% swapper [kernel.vmlinux] [k] __hrtimer_run_queues 606
1.74% swapper [kernel.vmlinux] [k] update_cfs_rq_load_avg. 1187
1.66% swapper [kernel.vmlinux] [k] apic_timer_interrupt 152
1.60% CPU 0/KVM [kvm] [k] kvm_set_msr_common 3046
1.60% gnome-shell libglib-2.0.so.0 [.] g_slist_find 37
1.46% gnome-termina libglib-2.0.so.0 [.] g_hash_table_lookup 370
#
Signed-off-by: Charles Baylis <charles.baylis@linaro.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Maxim Kuvyrkov <maxim.kuvyrkov@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1487943176-13840-1-git-send-email-charles.baylis@linaro.org
[ Use symbol__size(), remove needless %lld + (long long) casting ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is an odd refcount use case, so add some more comments to help
understand that when it hits zero it really means that the mmap()ed area
(on a perf_event_open() returned fd) has been munmap()ed.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Elena Reshetova <elena.reshetova@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170223162344.GD3595@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The refcount_t type and corresponding API should be used instead of
atomic_t when the variable is used as a reference counter.
This allows to avoid accidental refcounter overflows that might lead to
use-after-free situations.
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Kook <keescook@chromium.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: David Windsor <dwindsor@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hans Liljestrand <ishkamiel@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kees Kook <keescook@chromium.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matija Glavinic Pecotic <matija.glavinic-pecotic.ext@nokia.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: alsa-devel@alsa-project.org
Link: http://lkml.kernel.org/r/1487691303-31858-10-git-send-email-elena.reshetova@intel.com
[ Did missing tests/thread-map.c conversion ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The refcount_t type and corresponding API should be used instead of atomic_t
when the variable is used as a reference counter.
This allows to avoid accidental refcounter overflows that might lead to
use-after-free situations.
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Kook <keescook@chromium.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: David Windsor <dwindsor@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hans Liljestrand <ishkamiel@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kees Kook <keescook@chromium.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matija Glavinic Pecotic <matija.glavinic-pecotic.ext@nokia.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: alsa-devel@alsa-project.org
Link: http://lkml.kernel.org/r/1487691303-31858-9-git-send-email-elena.reshetova@intel.com
[ Did missing conversion in __machine__remove_thread() ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The refcount_t type and corresponding API should be used instead of
atomic_t when the variable is used as a reference counter.
This allows to avoid accidental refcounter overflows that might lead to
use-after-free situations.
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Kook <keescook@chromium.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: David Windsor <dwindsor@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hans Liljestrand <ishkamiel@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kees Kook <keescook@chromium.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matija Glavinic Pecotic <matija.glavinic-pecotic.ext@nokia.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: alsa-devel@alsa-project.org
Link: http://lkml.kernel.org/r/1487691303-31858-8-git-send-email-elena.reshetova@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The refcount_t type and corresponding API should be used instead of
atomic_t when the variable is used as a reference counter.
This allows to avoid accidental refcounter overflows that might lead to
use-after-free situations.
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Kook <keescook@chromium.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: David Windsor <dwindsor@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hans Liljestrand <ishkamiel@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kees Kook <keescook@chromium.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matija Glavinic Pecotic <matija.glavinic-pecotic.ext@nokia.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: alsa-devel@alsa-project.org
Link: http://lkml.kernel.org/r/1487691303-31858-7-git-send-email-elena.reshetova@intel.com
[ Did the missing conversion of tests/thread-mg-share.c too ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The refcount_t type and corresponding API should be used instead of
atomic_t when the variable is used as a reference counter.
This allows to avoid accidental refcounter overflows that might lead to
use-after-free situations.
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Kook <keescook@chromium.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: David Windsor <dwindsor@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hans Liljestrand <ishkamiel@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kees Kook <keescook@chromium.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matija Glavinic Pecotic <matija.glavinic-pecotic.ext@nokia.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: alsa-devel@alsa-project.org
Link: http://lkml.kernel.org/r/1487691303-31858-6-git-send-email-elena.reshetova@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The refcount_t type and corresponding API should be used instead of atomic_t
when the variable is used as a reference counter.
This allows to avoid accidental refcounter overflows that might lead to
use-after-free situations.
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Kook <keescook@chromium.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: David Windsor <dwindsor@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hans Liljestrand <ishkamiel@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kees Kook <keescook@chromium.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matija Glavinic Pecotic <matija.glavinic-pecotic.ext@nokia.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: alsa-devel@alsa-project.org
Link: http://lkml.kernel.org/r/1487691303-31858-5-git-send-email-elena.reshetova@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The refcount_t type and corresponding API should be used instead of
atomic_t when the variable is used as a reference counter.
This allows to avoid accidental refcounter overflows that might lead to
use-after-free situations.
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Kook <keescook@chromium.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: David Windsor <dwindsor@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hans Liljestrand <ishkamiel@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kees Kook <keescook@chromium.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matija Glavinic Pecotic <matija.glavinic-pecotic.ext@nokia.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: alsa-devel@alsa-project.org
Link: http://lkml.kernel.org/r/1487691303-31858-4-git-send-email-elena.reshetova@intel.com
[ Reinstated comm_str__get() function, needed when reusing entries in the rbtree ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The refcount_t type and corresponding API should be used instead of atomic_t
when the variable is used as a reference counter.
This allows to avoid accidental refcounter overflows that might lead to
use-after-free situations.
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Kook <keescook@chromium.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: David Windsor <dwindsor@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hans Liljestrand <ishkamiel@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kees Kook <keescook@chromium.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matija Glavinic Pecotic <matija.glavinic-pecotic.ext@nokia.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: alsa-devel@alsa-project.org
Link: http://lkml.kernel.org/r/1487691303-31858-3-git-send-email-elena.reshetova@intel.com
[ fixed mixed conversion to refcount in tests/cpumap.c ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The refcount_t type and corresponding API should be used instead of
atomic_t when the variable is used as a reference counter.
This allows to avoid accidental refcounter overflows that might lead to
use-after-free situations.
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Kook <keescook@chromium.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: alsa-devel@alsa-project.org
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: David Windsor <dwindsor@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hans Liljestrand <ishkamiel@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kees Kook <keescook@chromium.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matija Glavinic Pecotic <matija.glavinic-pecotic.ext@nokia.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1487691303-31858-2-git-send-email-elena.reshetova@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To aid in catching bugs when using atomics as a reference count.
This is a trimmed down version with just what is used by tools/ at
this point.
After this, the patches submitted by Elena for tools/ doing the
conversion from atomic_ to recount_ methods can be applied and tested.
To activate it, buint perf with:
make DEBUG=1 -C tools/perf
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Elena Reshetova <elena.reshetova@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-dqtxsumns9ov0l9r5x398f19@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Will be included from atomic.h and used in refcount.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Elena Reshetova <elena.reshetova@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-pzrydfee75mhq64kazxmf9it@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When using perf stat on an AMD F15h system with the default hw events
attributes, some of the events don't get counted:
Performance counter stats for 'sleep 1':
0.749208 task-clock (msec) # 0.001 CPUs utilized
1 context-switches # 0.001 M/sec
0 cpu-migrations # 0.000 K/sec
54 page-faults # 0.072 M/sec
1,122,815 cycles # 1.499 GHz
286,740 stalled-cycles-frontend # 25.54% frontend cycles idle
<not counted> stalled-cycles-backend (0.00%)
^^^^^^^^^^^^
<not counted> instructions (0.00%)
^^^^^^^^^^^^
<not counted> branches (0.00%)
<not counted> branch-misses (0.00%)
1.001550070 seconds time elapsed
The reason is that we have the HW watchdog consuming one PMU counter and
when perf tries to schedule 6 events on 6 counters and some of those
counters are constrained to only a specific subset of PMCs by the
hardware, the event scheduling fails.
So issue a hint to disable the HW watchdog around a perf stat session.
Committer note:
Testing it...
# perf stat -d usleep 1
Performance counter stats for 'usleep 1':
1.180203 task-clock (msec) # 0.490 CPUs utilized
1 context-switches # 0.847 K/sec
0 cpu-migrations # 0.000 K/sec
54 page-faults # 0.046 M/sec
184,754 cycles # 0.157 GHz
714,553 instructions # 3.87 insn per cycle
154,661 branches # 131.046 M/sec
7,247 branch-misses # 4.69% of all branches
219,984 L1-dcache-loads # 186.395 M/sec
17,600 L1-dcache-load-misses # 8.00% of all L1-dcache hits (90.16%)
<not counted> LLC-loads (0.00%)
<not counted> LLC-load-misses (0.00%)
0.002406823 seconds time elapsed
Some events weren't counted. Try disabling the NMI watchdog:
echo 0 > /proc/sys/kernel/nmi_watchdog
perf stat ...
echo 1 > /proc/sys/kernel/nmi_watchdog
#
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <rric@kernel.org>
Cc: Vince Weaver <vince@deater.net>
Link: http://lkml.kernel.org/r/20170211183218.ijnvb5f7ciyuunx4@pd.tnic
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Update to the new file paths, remove them from introductory comments.
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170218113140.8051-1-bp@alien8.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Pull cgroup updates from Tejun Heo:
"Several noteworthy changes.
- Parav's rdma controller is finally merged. It is very straight
forward and can limit the abosolute numbers of common rdma
constructs used by different cgroups.
- kernel/cgroup.c got too chubby and disorganized. Created
kernel/cgroup/ subdirectory and moved all cgroup related files
under kernel/ there and reorganized the core code. This hurts for
backporting patches but was long overdue.
- cgroup v2 process listing reimplemented so that it no longer
depends on allocating a buffer large enough to cache the entire
result to sort and uniq the output. v2 has always mangled the sort
order to ensure that users don't depend on the sorted output, so
this shouldn't surprise anybody. This makes the pid listing
functions use the same iterators that are used internally, which
have to have the same iterating capabilities anyway.
- perf cgroup filtering now works automatically on cgroup v2. This
patch was posted a long time ago but somehow fell through the
cracks.
- misc fixes asnd documentation updates"
* 'for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (27 commits)
kernfs: fix locking around kernfs_ops->release() callback
cgroup: drop the matching uid requirement on migration for cgroup v2
cgroup, perf_event: make perf_event controller work on cgroup2 hierarchy
cgroup: misc cleanups
cgroup: call subsys->*attach() only for subsystems which are actually affected by migration
cgroup: track migration context in cgroup_mgctx
cgroup: cosmetic update to cgroup_taskset_add()
rdmacg: Fixed uninitialized current resource usage
cgroup: Add missing cgroup-v2 PID controller documentation.
rdmacg: Added documentation for rdmacg
IB/core: added support to use rdma cgroup controller
rdmacg: Added rdma cgroup controller
cgroup: fix a comment typo
cgroup: fix RCU related sparse warnings
cgroup: move namespace code to kernel/cgroup/namespace.c
cgroup: rename functions for consistency
cgroup: move v1 mount functions to kernel/cgroup/cgroup-v1.c
cgroup: separate out cgroup1_kf_syscall_ops
cgroup: refactor mount path and clearly distinguish v1 and v2 paths
cgroup: move cgroup v1 specific code to kernel/cgroup/cgroup-v1.c
...
Fix typos and add the following to the scripts/spelling.txt:
an one||a one
I dropped the "an" before "one or more" in
drivers/net/ethernet/sfc/mcdi_pcol.h.
Link: http://lkml.kernel.org/r/1481573103-11329-6-git-send-email-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix typos and add the following to the scripts/spelling.txt:
an union||a union
Link: http://lkml.kernel.org/r/1481573103-11329-5-git-send-email-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix typos and add the following to the scripts/spelling.txt:
an user||a user
an userspace||a userspace
I also added "userspace" to the list since it is a common word in Linux.
I found some instances for "an userfaultfd", but I did not add it to the
list. I felt it is endless to find words that start with "user" such as
"userland" etc., so must draw a line somewhere.
Link: http://lkml.kernel.org/r/1481573103-11329-4-git-send-email-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull networking updates from David Miller:
"Highlights:
1) Support TX_RING in AF_PACKET TPACKET_V3 mode, from Sowmini
Varadhan.
2) Simplify classifier state on sk_buff in order to shrink it a bit.
From Willem de Bruijn.
3) Introduce SIPHASH and it's usage for secure sequence numbers and
syncookies. From Jason A. Donenfeld.
4) Reduce CPU usage for ICMP replies we are going to limit or
suppress, from Jesper Dangaard Brouer.
5) Introduce Shared Memory Communications socket layer, from Ursula
Braun.
6) Add RACK loss detection and allow it to actually trigger fast
recovery instead of just assisting after other algorithms have
triggered it. From Yuchung Cheng.
7) Add xmit_more and BQL support to mvneta driver, from Simon Guinot.
8) skb_cow_data avoidance in esp4 and esp6, from Steffen Klassert.
9) Export MPLS packet stats via netlink, from Robert Shearman.
10) Significantly improve inet port bind conflict handling, especially
when an application is restarted and changes it's setting of
reuseport. From Josef Bacik.
11) Implement TX batching in vhost_net, from Jason Wang.
12) Extend the dummy device so that VF (virtual function) features,
such as configuration, can be more easily tested. From Phil
Sutter.
13) Avoid two atomic ops per page on x86 in bnx2x driver, from Eric
Dumazet.
14) Add new bpf MAP, implementing a longest prefix match trie. From
Daniel Mack.
15) Packet sample offloading support in mlxsw driver, from Yotam Gigi.
16) Add new aquantia driver, from David VomLehn.
17) Add bpf tracepoints, from Daniel Borkmann.
18) Add support for port mirroring to b53 and bcm_sf2 drivers, from
Florian Fainelli.
19) Remove custom busy polling in many drivers, it is done in the core
networking since 4.5 times. From Eric Dumazet.
20) Support XDP adjust_head in virtio_net, from John Fastabend.
21) Fix several major holes in neighbour entry confirmation, from
Julian Anastasov.
22) Add XDP support to bnxt_en driver, from Michael Chan.
23) VXLAN offloads for enic driver, from Govindarajulu Varadarajan.
24) Add IPVTAP driver (IP-VLAN based tap driver) from Sainath Grandhi.
25) Support GRO in IPSEC protocols, from Steffen Klassert"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1764 commits)
Revert "ath10k: Search SMBIOS for OEM board file extension"
net: socket: fix recvmmsg not returning error from sock_error
bnxt_en: use eth_hw_addr_random()
bpf: fix unlocking of jited image when module ronx not set
arch: add ARCH_HAS_SET_MEMORY config
net: napi_watchdog() can use napi_schedule_irqoff()
tcp: Revert "tcp: tcp_probe: use spin_lock_bh()"
net/hsr: use eth_hw_addr_random()
net: mvpp2: enable building on 64-bit platforms
net: mvpp2: switch to build_skb() in the RX path
net: mvpp2: simplify MVPP2_PRS_RI_* definitions
net: mvpp2: fix indentation of MVPP2_EXT_GLOBAL_CTRL_DEFAULT
net: mvpp2: remove unused register definitions
net: mvpp2: simplify mvpp2_bm_bufs_add()
net: mvpp2: drop useless fields in mvpp2_bm_pool and related code
net: mvpp2: remove unused 'tx_skb' field of 'struct mvpp2_tx_queue'
net: mvpp2: release reference to txq_cpu[] entry after unmapping
net: mvpp2: handle too large value in mvpp2_rx_time_coal_set()
net: mvpp2: handle too large value handling in mvpp2_rx_pkts_coal_set()
net: mvpp2: remove useless arguments in mvpp2_rx_{pkts, time}_coal_set
...
It should call perf_quiet_option() to suppress messages.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20170217081742.17417-7-namhyung@kernel.org
[ Fix merge clash with 483635a9d0 ("perf record: Add -a as default target") ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The -q/--quiet option is to suppress any message. Sometimes users just
want to see the numbers and it can be used for that case.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Suggested-and-Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20170217081742.17417-6-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It now can have negative value to suppress the message entirely. So it
needs to check it being positive.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20170217081742.17417-3-namhyung@kernel.org
[ Adjust fuzz on tools/perf/util/pmu.c, add > 0 checks in many other places ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf_quiet_option() is to suppress all messages. It's intended to
be called just after parsing options.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20170217081742.17417-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Running 'perf record' with no target (-a, -p, -t, etc) will now collect
system wide data.
Commiter notes:
Testing it:
[root@jouet ~]# perf record
^C[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 1.351 MB perf.data (366 samples) ]
#
is equivalent to:
# perf record -a
^C[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 1.411 MB perf.data (978 samples) ]
#
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20170217170018.GA15389@krava
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Boris asked for default -a option in case we monitor only uncore events.
While implementing that I thought it might be actually useful to make it
overall default.
Running 'perf stat' will now collect system wide data.
Committer note:
Testing it:
# perf stat
^C
Performance counter stats for 'system wide':
3571.559178 cpu-clock (msec) # 4.000 CPUs utilized
3,346 context-switches # 0.937 K/sec
277 cpu-migrations # 0.078 K/sec
57,271 page-faults # 0.016 M/sec
4,535,633,835 cycles # 1.270 GHz
6,389,736,516 instructions # 1.41 insn per cycle
1,541,293,875 branches # 431.547 M/sec
14,526,396 branch-misses # 0.94% of all branches
0.892950118 seconds time elapsed
#
Requested-and-Acked-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20170217170034.GB15389@krava
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently we allow not to specify value for numeric terms and we set
them to value 1. This was originaly meant just for single bit terms to
allow user to type:
$ perf record -e 'cpu/cpu-cycles,any'
instead of:
$ perf record -e 'cpu/cpu-cycles,any=1'
However it works also for multi bits terms like:
$ perf record -e 'cpu/event/' ls
...
$ perf evlist -v
..., config: 0x1, ...
After discussion with Peter we decided making such term usage to fail,
like:
$ perf record -e 'cpu/event/' ls
event syntax error: 'cpu/event/'
\___ no value assigned for term
...
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1487340058-10496-4-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We need to add yet another parameter to new_term function in following
patch, so it's better to move first all the current params into template
struct parse_events_term and use it as a single argument.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1487340058-10496-3-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ingo reported following build failure:
On Sat, Feb 11, 2017 at 12:12:34PM +0100, Ingo Molnar wrote:
>
> So I had this oldish 32-bit 15.10 Ubuntu installation around (fully updated), and
> trying to build perf gave me:
>
> deimos:~/tip/tools/perf> make
> BUILD: Doing 'make -j4' parallel build
> make[3]: *** No rule to make target '/usr/include/x86_64-linux-gnu/sys/types.h', needed by 'fixdep.o'. Stop.
> Makefile:42: recipe for target 'fixdep-in.o' failed
> make[2]: *** [fixdep-in.o] Error 2
> /home/mingo/tip/tools/build/Makefile.include:4: recipe for target 'fixdep' failed
> make[1]: *** [fixdep] Error 2
> Makefile:68: recipe for target 'all' failed
> make: *** [all] Error 2
>
> Now this got a bit better after I did a 'make mrproper' in the kernel tree:
>
> deimos:~/tip/tools/perf> make
> BUILD: Doing 'make -j4' parallel build
> HOSTCC fixdep.o
> /home/mingo/tip/tools/build/fixdep: 1: /home/mingo/tip/tools/build/fixdep: Syntax error: "(" unexpected
> /home/mingo/tip/tools/build/Makefile.build:101: recipe for target 'fixdep.o' failed
> make[3]: *** [fixdep.o] Error 2
> Makefile:42: recipe for target 'fixdep-in.o' failed
> make[2]: *** [fixdep-in.o] Error 2
> /home/mingo/tip/tools/build/Makefile.include:4: recipe for target 'fixdep' failed
> make[1]: *** [fixdep] Error 2
> Makefile:68: recipe for target 'all' failed
> make: *** [all] Error 2
>
> After some digging it turns out that my 'fixdep' binary was 64-bit:
>
> deimos:~/tip/tools/perf> file /home/mingo/tip/tools/build/fixdep
> /home/mingo/tip/tools/build/fixdep: ELF 64-bit LSB executable, x86-64, version 1
> (SYSV), dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2, for GNU/Linux
> 2.6.32, BuildID[sha1]=d527f736b57b5ba47210fbcb562a3b52867d21c1, not stripped
>
> But it did not get cleaned out by 'make clean'.
>
> Only after I did a 'make clean' in tools/ itself, did it get built properly.
It shows we don't clean up properly the fixdep objects, so adding
special rule for that.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Reported-by: Ingo Molnar <mingo@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1487340058-10496-2-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There are 2 problems wrt. cpu_topology_map on systems with sparse CPUs:
1. offline/absent CPUs will have their socket_id and core_id set to -1
which triggers:
"socket_id number is too big.You may need to upgrade the perf tool."
2. size of cpu_topology_map (perf_env.cpu[]) is allocated based on
_SC_NPROCESSORS_CONF, but can be indexed with CPU ids going above.
Users of perf_env.cpu[] are using CPU id as index. This can lead
to read beyond what was allocated:
==19991== Invalid read of size 4
==19991== at 0x490CEB: check_cpu_topology (topology.c:69)
==19991== by 0x490CEB: test_session_topology (topology.c:106)
...
For example:
_SC_NPROCESSORS_CONF == 16
available: 2 nodes (0-1)
node 0 cpus: 0 6 8 10 16 22 24 26
node 0 size: 12004 MB
node 0 free: 9470 MB
node 1 cpus: 1 7 9 11 23 25 27
node 1 size: 12093 MB
node 1 free: 9406 MB
node distances:
node 0 1
0: 10 20
1: 20 10
This patch changes HEADER_NRCPUS.nr_cpus_available from _SC_NPROCESSORS_CONF
to max_present_cpu and updates any user of cpu_topology_map to iterate
with nr_cpus_avail.
As a consequence HEADER_CPU_TOPOLOGY core_id and socket_id lists get longer,
but maintain compatibility with pre-patch state - index to cpu_topology_map is
CPU id.
perf test 36 -v
36: Session topology :
--- start ---
test child forked, pid 22211
templ file: /tmp/perf-test-gmdX5i
CPU 0, core 0, socket 0
CPU 1, core 0, socket 1
CPU 6, core 10, socket 0
CPU 7, core 10, socket 1
CPU 8, core 1, socket 0
CPU 9, core 1, socket 1
CPU 10, core 9, socket 0
CPU 11, core 9, socket 1
CPU 16, core 0, socket 0
CPU 22, core 10, socket 0
CPU 23, core 10, socket 1
CPU 24, core 1, socket 0
CPU 25, core 1, socket 1
CPU 26, core 9, socket 0
CPU 27, core 9, socket 1
test child finished with 0
---- end ----
Session topology: Ok
Signed-off-by: Jan Stancek <jstancek@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/d7c05c6445fca74a8442c2c73cfffd349c52c44f.1487146877.git.jstancek@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When build_cpu_topo() encounters offline/absent CPUs, it fails to find any
sysfs entries and returns failure.
This leads to build_cpu_topology() and write_cpu_topology() failing as
well.
Because HEADER_CPU_TOPOLOGY has not been written, read leaves cpu_topology_map
NULL and we get NULL ptr deref at:
...
cmd_test
__cmd_test
test_and_print
run_test
test_session_topology
check_cpu_topology
36: Session topology :
--- start ---
test child forked, pid 14902
templ file: /tmp/perf-test-4CKocW
failed to write feature HEADER_CPU_TOPOLOGY
perf: Segmentation fault
Obtained 9 stack frames.
./perf(sighandler_dump_stack+0x41) [0x5095f1]
/lib64/libc.so.6(+0x35250) [0x7f4b7c3c9250]
./perf(test_session_topology+0x1db) [0x490ceb]
./perf() [0x475b68]
./perf(cmd_test+0x5b9) [0x4763c9]
./perf() [0x4945a3]
./perf(main+0x69f) [0x427e8f]
/lib64/libc.so.6(__libc_start_main+0xf5) [0x7f4b7c3b5b35]
./perf() [0x427fb9]
test child interrupted
---- end ----
Session topology: FAILED!
This patch makes build_cpu_topology() skip offline/absent CPUs, by checking
their presence against cpu_map built from online CPUs.
Signed-off-by: Jan Stancek <jstancek@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/a271b770175524f4961d4903af33798358a4a518.1487146877.git.jstancek@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Similar to cpu__max_cpu() (which returns the max possible CPU), returns
the max present CPU.
Signed-off-by: Jan Stancek <jstancek@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/8ea4601b5cacc49927235b4ebac424bd6eeccb06.1487146877.git.jstancek@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The struct branch_stack->branch_stack.cycles field is a u64 :16
bitfield, and this somehow confuses clang 4.0 when checking the
arguments of a printf format, so cast the :16 to unsigned short to help
it.
Silences this:
util/session.c:935:4: error: format specifies type 'unsigned short' but the argument has type 'u64' (aka 'unsigned long') [-Werror,-Wformat]
e->flags.cycles,
^~~~~~~~~~~~~~~
1 error generated.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-eo2t4uhlbne105z72tvyzkp1@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The -spec=/path/to/file can be used to change what gcc puts in the cc,
ld, etc command lines, but this is not present in clang, filter it out
at the setup.py file by changing python2's internal variable where it
keeps its initial CFLAGS value.
With this all of perf can be built in at least Fedora 25, fixing this
problem:
GEN /tmp/build/perf/python/perf.so
CC /tmp/build/perf/builtin-buildid-list.o
clang-4.0: error: argument unused during compilation: '-specs=/usr/lib/rpm/redhat/redhat-hardened-cc1' [-Werror,-Wunused-command-line-argument]
clang-4.0: error: argument unused during compilation: '-specs=/usr/lib/rpm/redhat/redhat-hardened-cc1' [-Werror,-Wunused-command-line-argument]
error: command 'clang' failed with exit status 1
Now I need to change all the containers where I have clang to build
perf with it, so that we can check that in other distros (opensuse, debian,
ubuntu, etc) this also works.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-g9lhgr162ao8ao29vvf0hgm1@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Gcc has a -spec option to override what options to pass to cc, etc, and
in some distros this is used, like in fedora, where we end up getting
this passed to gcc that makes clang, that doesn't have this option to
stop the build:
CC /tmp/build/perf/util/scripting-engines/trace-event-python.o
clang-4.0: error: argument unused during compilation: '-specs=/usr/lib/rpm/redhat/redhat-hardened-cc1' [-Werror,-Wunused-command-line-argument]
So filter this out when the compiler used is clang, this way we
can build the python scripting support in tools/perf/.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-2gosxoiouf24pnlknp7w7q4z@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As pointed out by clang, we were not providing a prototype for a
function before using it:
util/parse-events.y:699:6: error: conflicting types for 'parse_events_error'
void parse_events_error(YYLTYPE *loc, void *data,
^
/tmp/build/perf/util/parse-events-bison.c:2224:7: note: previous implicit declaration is here
yyerror (&yylloc, _data, scanner, YY_("syntax error"));
^
/tmp/build/perf/util/parse-events-bison.c:65:25: note: expanded from macro 'yyerror'
#define yyerror parse_events_error
1 error generated.
One line fix it.
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170215130605.GC4020@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The alias->unit field is an array, so to check that it is not set we
should see if it is an empty string, i.e. alias->unit[0], instead of
checking alias->unit != NULL, as this will _always_ evaluate to 'true'.
Pointed out by clang.
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170214182435.GD4458@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In a few cases we were using 'enum map_type' and that triggered this
warning when using clang:
util/session.c:1923:16: error: comparison of constant 2 with expression of type 'enum map_type' is always true
[-Werror,-Wtautological-constant-out-of-range-compare]
for (i = 0; i < MAP__NR_TYPES; ++i) {
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-i6uyo6bsopa2dghnx8qo7rri@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So set it only for other compilers, allowing us to overcome yet another
build failure due to an inexistent clang -W option:
error: unknown warning option '-Wno-override-init'; did you mean '-Wno-override-module'? [-Werror,-Wunknown-warning-option]
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-oaa1ici3j8nygp4pzl2oobh3@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As this is a GNU extension and while harmless in this case, we can do
the same thing in a more clearer way by using a existing thread_map and
cpu_map constructors:
With this we avoid this while compiling with clang:
util/evsel.c:1659:17: error: field 'map' with variable sized type 'struct cpu_map' not at the end of a struct or class is a GNU extension
[-Werror,-Wgnu-variable-sized-type-not-at-end]
struct cpu_map map;
^
util/evsel.c:1667:20: error: field 'map' with variable sized type 'struct thread_map' not at the end of a struct or class is a GNU extension
[-Werror,-Wgnu-variable-sized-type-not-at-end]
struct thread_map map;
^
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-207juvrqjiar7uvas2s83v5i@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Genuine problem detected with clang, the warnings are spot on:
util/probe-event.c:2079:7: error: variable 'map' is used uninitialized whenever 'if' condition is false [-Werror,-Wsometimes-uninitialized]
if (addr) {
^~~~
util/probe-event.c:2094:6: note: uninitialized use occurs here
if (map && !is_kprobe) {
^~~
util/probe-event.c:2079:3: note: remove the 'if' if its condition is always true
if (addr) {
^~~~~~~~~~
util/probe-event.c:2075:8: error: variable 'map' is used uninitialized whenever 'if' condition is true [-Werror,-Wsometimes-uninitialized]
if (kernel_get_symbol_address_by_name(tp->symbol,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
util/probe-event.c:2094:6: note: uninitialized use occurs here
if (map && !is_kprobe) {
^~~
util/probe-event.c:2075:4: note: remove the 'if' if its condition is always false
if (kernel_get_symbol_address_by_name(tp->symbol,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
util/probe-event.c:2064:17: note: initialize the variable 'map' to silence this warning
struct map *map;
^
= NULL
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-m3501el55i10hctfbmi2qxzr@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As this is a GNU extension and while harmless in this case, we can do
the same thing in a more clearer way by using an existing thread_map
constructor.
With this we avoid this while compiling with clang:
util/parse-events.c:2024:21: error: field 'map' with variable sized type 'struct thread_map' not at the end of a struct or class is a GNU extension
[-Werror,-Wgnu-variable-sized-type-not-at-end]
struct thread_map map;
^
1 error generated.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-tqocbplnyyhpst6drgm2u4m3@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As this is a GNU extension and while harmless in this case, we can do
the same thing in a more clearer way by using an existing thread_map
constructor.
With this we avoid this while compiling with clang:
builtin-record.c:659:21: error: field 'map' with variable sized type 'struct thread_map' not at the end of a struct or class is a GNU extension
[-Werror,-Wgnu-variable-sized-type-not-at-end]
struct thread_map map;
^
1 error generated.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-c9drclo52ezxmwa7qxklin2y@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
End result is the same, its an ABI, so the struct won't change, avoid
using a GNU extension, so that we can catch other cases that may be bugs.
Caught when building with clang:
tests/parse-no-sample-id-all.c:53:20: error: field 'attr' with variable sized type 'struct attr_event' not at the end of a struct or class is a GNU extension
[-Werror,-Wgnu-variable-sized-type-not-at-end]
struct attr_event attr;
^
1 error generated.
Testing it:
# perf test sample_id
24: Parse with no sample_id_all bit set : Ok
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-e2vs1x771fc208uvxnwcf08b@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When building with clang we get this error:
bench/numa.c:46:9: error: 'dprintf' macro redefined [-Werror,-Wmacro-redefined]
#define dprintf(x...) do { if (g && g->p.show_details >= 1) printf(x); } while (0)
^
/usr/include/bits/stdio2.h:145:12: note: previous definition is here
# define dprintf(fd, ...) \
^
CC /tmp/build/perf/tests/parse-no-sample-id-all.o
1 error generated.
So, make sure it is undefined before using that name.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Davidlohr Bueso <dbueso@suse.de>
Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Jakub Jelen <jjelen@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-f654o2svtrutamvxt7igwz74@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This reverts commit 60758d6668.
Now that libsubcmd makes sure that OPT_UINTEGER options will not
return negative values, we can revert this patch while addressing
the problem it solved:
# perf bench futex hash -t -4
# Running 'futex/hash' benchmark:
Error: switch `t' expects an unsigned numerical value
Usage: perf bench futex hash <options>
-t, --threads <n> Specify amount of threads
# perf bench futex hash -t-4
# Running 'futex/hash' benchmark:
Error: switch `t' expects an unsigned numerical value
Usage: perf bench futex hash <options>
-t, --threads <n> Specify amount of threads
#
IMO it is more reasonable to flat out refuse to process a negative
number than to silently turn it into an absolute value.
This also helps in silencing clang's complaint about asking for an
absolute value of an unsigned integer:
bench/futex-hash.c:133:10: error: taking the absolute value of unsigned type 'unsigned int' has no effect [-Werror,-Wabsolute-value]
nsecs = futexbench_sanitize_numeric(nsecs);
^
bench/futex.h:104:42: note: expanded from macro 'futexbench_sanitize_numeric'
#define futexbench_sanitize_numeric(__n) abs((__n))
^
bench/futex-hash.c:133:10: note: remove the call to 'abs' since unsigned values cannot be negative
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Davidlohr Bueso <dbueso@suse.de>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-2kl68v22or31vw643m2exz8x@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To avoid this when using clang:
warning: optimization level '-O6' is not supported; using '-O3' instead
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-kaghp8ddvzdsg03putemcq96@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As it will always evaluate to 'true', as reported by clang:
util/map.c:390:36: error: address of array 'map->dso->name' will always evaluate to 'true' [-Werror,-Wpointer-bool-conversion]
if (map && map->dso && (map->dso->name || map->dso->long_name)) {
~~~~~~~~~~^~~~ ~~
util/map.c:393:22: error: address of array 'map->dso->name' will always evaluate to 'true' [-Werror,-Wpointer-bool-conversion]
else if (map->dso->name)
~~ ~~~~~~~~~~^~~~
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-x8cu007cly40kfp8xnpi9kya@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It will always evaluate to 'true', as clang warns:
CC /tmp/build/perf/tests/perf-record.o
CC /tmp/build/perf/tests/evsel-roundtrip-name.o
tests/perf-record.c:69:24: error: comparison of array 'argv' equal to a null pointer is always false [-Werror,-Wtautological-pointer-compare]
if (evlist == NULL || argv == NULL) {
^~~~ ~~~~
1 error generated.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-o4977g6p9b3peak9ct6ef48q@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As it is an array, so will always evaluate to 'true', as reported by
clang:
builtin-sched.c:2070:19: error: address of array 'sym->name' will always evaluate to 'true' [-Werror,-Wpointer-bool-conversion]
if (sym && sym->name) {
~~ ~~~~~^~~~
1 warning generated.
So just ditch all those useless checks.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-ydpm927col06paixb775jjx5@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When a tool can't open counters due to the kernel.perf_event_paranoit
sysctl setting, we inform how to tweak it to allow the operation to
succeed, in addition to that, suggest setting /etc/sysctl.conf to
make the setting permanent.
Suggested-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-4gwe99k4a6p12d4u8bbyttj2@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix below compile error:
CC util/scripting-engines/trace-event-perl.o
In file included from /usr/lib/perl5/5.22.2/i686-linux/CORE/perl.h:5673:0,
from util/scripting-engines/trace-event-perl.c:31:
/usr/lib/perl5/5.22.2/i686-linux/CORE/inline.h: In function 'S__is_utf8_char_slow':
/usr/lib/perl5/5.22.2/i686-linux/CORE/inline.h:270:5: error: nested extern declaration of 'Perl___notused' [-Werror=nested-externs]
dTHX; /* The function called below requires thread context */
^
cc1: all warnings being treated as errors
After digging perl5 repository, I find out that we will meet this
compile error with perl from v5.21.1 to v5.25.4
Signed-off-by: Wang YanQing <udknight@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170212024655.GA15997@udknight
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The "delta-abs" compute method will show most changed entries on top.
So users can easily see how much effect between the data. Note that it
also changes the default of -o option to 1 in order to apply the compute
method. To see original-style (sorted by baseline) use -o 0 option.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170210161856.18422-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The diff.compute config variable is to set the default compute method of
perf diff command (-c option). Possible values 'delta' (default),
'delta-abs', 'ratio' and 'wdiff'.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Taeung Song <treeze.taeung@gmail.com>
Link: http://lkml.kernel.org/r/20170210073614.24584-4-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In many cases, I need to look at differences between two data so I often
used the -o option to sort the result base on the difference first.
It'd be nice to have a config option to set it by default.
The diff.order config option is to set the default value of -o/--order
option.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Taeung Song <treeze.taeung@gmail.com>
Link: http://lkml.kernel.org/r/20170210073614.24584-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To match the kernel headers structure, setting up things that are
specific to gcc or to some specific version of gcc.
It gets included by linux/compiler.h when gcc is the compiler being
used.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Joe Perches <joe@perches.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-fabcqfq4asodq9t158hcs8t3@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To address new warnings emmited by gcc 7, e.g.::
CC /tmp/build/perf/util/intel-pt-decoder/intel-pt-pkt-decoder.o
CC /tmp/build/perf/tests/parse-events.o
util/intel-pt-decoder/intel-pt-pkt-decoder.c: In function 'intel_pt_pkt_desc':
util/intel-pt-decoder/intel-pt-pkt-decoder.c:499:6: error: this statement may fall through [-Werror=implicit-fallthrough=]
if (!(packet->count))
^
util/intel-pt-decoder/intel-pt-pkt-decoder.c:501:2: note: here
case INTEL_PT_CYC:
^~~~
CC /tmp/build/perf/util/intel-pt-decoder/intel-pt-decoder.o
cc1: all warnings being treated as errors
Acked-by: Andi Kleen <ak@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-mf0hw789pu9x855us5l32c83@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Addressing a few cases spotted by a new warning in gcc 7:
tests/parse-events.c: In function 'test_pmu_events':
tests/parse-events.c:1790:39: error: '%s' directive output may be truncated writing up to 255 bytes into a region of size 90 [-Werror=format-truncation=]
snprintf(name, MAX_NAME, "cpu/event=%s/u", ent->d_name);
^~
In file included from /usr/include/stdio.h:939:0,
from /git/linux/tools/perf/util/map.h:9,
from /git/linux/tools/perf/util/symbol.h:7,
from /git/linux/tools/perf/util/evsel.h:10,
from tests/parse-events.c:3:
/usr/include/bits/stdio2.h:64:10: note: '__builtin___snprintf_chk' output between 13 and 268 bytes into a destination of size 100
return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
__bos (__s), __fmt, __va_arg_pack ());
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
tests/parse-events.c:1798:29: error: '%s' directive output may be truncated writing up to 255 bytes into a region of size 100 [-Werror=format-truncation=]
snprintf(name, MAX_NAME, "%s:u,cpu/event=%s/u", ent->d_name, ent->d_name);
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 945aea220b ("perf tests: Move test objects into 'tests' directory")
Link: http://lkml.kernel.org/n/tip-ty4q2p8zp1dp3mskvubxskm5@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Addressing this warning from gcc 7:
CC /tmp/build/perf/bench/numa.o
bench/numa.c: In function '__bench_numa':
bench/numa.c:1582:42: error: '%d' directive output may be truncated writing between 1 and 10 bytes into a region of size between 8 and 17 [-Werror=format-truncation=]
snprintf(tname, 32, "process%d:thread%d", p, t);
^~
bench/numa.c:1582:25: note: directive argument in the range [0, 2147483647]
snprintf(tname, 32, "process%d:thread%d", p, t);
^~~~~~~~~~~~~~~~~~~~
In file included from /usr/include/stdio.h:939:0,
from bench/../util/util.h:47,
from bench/../builtin.h:4,
from bench/numa.c:11:
/usr/include/bits/stdio2.h:64:10: note: '__builtin___snprintf_chk' output between 17 and 35 bytes into a destination of size 32
return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
__bos (__s), __fmt, __va_arg_pack ());
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Petr Holasek <pholasek@redhat.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-twa37vsfqcie5gwpqwnjuuz9@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In commit daeecbc0c4 ("perf tools: Add event_update event scale type"), the
handling of PERF_EVENT_UPDATE__SCALE cast struct event_update_event->data to a
pointer to event_update_event_scale, uses some field from this casted struct
and then ends up falling through to the handling of another event type,
PERF_EVENT_UPDATE__CPUS were it casts that ev->data to yet another type, oops,
fix it by inserting the missing break.
Noticed when building perf using gcc 7 on Fedora Rawhide:
util/header.c: In function 'perf_event__process_event_update':
util/header.c:3207:16: error: this statement may fall through [-Werror=implicit-fallthrough=]
evsel->scale = ev_scale->scale;
~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~
util/header.c:3208:2: note: here
case PERF_EVENT_UPDATE__CPUS:
^~~~
This wasn't noticed because probably PERF_EVENT_UPDATE__CPUS comes after
PERF_EVENT_UPDATE__SCALE, so we would just create a bogus evsel->own_cpus when
processing a PERF_EVENT_UPDATE__SCALE to then leak it and create a new cpu map
with the correct data.
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Fixes: daeecbc0c4 ("perf tools: Add event_update event scale type")
Link: http://lkml.kernel.org/n/tip-lukcf9hdj092ax2914ss95at@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The size of dirent->dt_name is NAME_MAX + 1, but the size for the 'path'
buffer is hard coded at 256, which may truncate it because we also
prepend "/proc/", so that all that into account and thank gcc 7 for this
warning:
/git/linux/tools/perf/util/thread_map.c: In function 'thread_map__new_by_uid':
/git/linux/tools/perf/util/thread_map.c:119:39: error: '%s' directive output may be truncated writing up to 255 bytes into a region of size 250 [-Werror=format-truncation=]
snprintf(path, sizeof(path), "/proc/%s", dirent->d_name);
^~
In file included from /usr/include/stdio.h:939:0,
from /git/linux/tools/perf/util/thread_map.c:5:
/usr/include/bits/stdio2.h:64:10: note: '__builtin___snprintf_chk' output between 7 and 262 bytes into a destination of size 256
return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
__bos (__s), __fmt, __va_arg_pack ());
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-csy0r8zrvz5efccgd4k12c82@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The implicit fall through case label here is intended, so let us inform
that to gcc >= 7:
CC /tmp/build/perf/builtin-top.o
builtin-top.c: In function 'display_thread':
builtin-top.c:644:7: error: this statement may fall through [-Werror=implicit-fallthrough=]
if (errno == EINTR)
^
builtin-top.c:647:3: note: here
default:
^~~~~~~
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-lmcfnnyx9ic0m6j0aud98p4e@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The implicit fall through case label here is intended, so let us inform
that to gcc >= 7:
util/strfilter.c: In function 'strfilter_node__sprint':
util/strfilter.c:270:6: error: this statement may fall through [-Werror=implicit-fallthrough=]
if (len < 0)
^
util/strfilter.c:272:2: note: here
case '!':
^~~~
cc1: all warnings being treated as errors
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-z2dpywg7u8fim000hjfbpyfm@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The implicit fall through case label here is intended, so let us inform
that to gcc >= 7:
CC /tmp/build/perf/util/string.o
util/string.c: In function 'perf_atoll':
util/string.c:22:7: error: this statement may fall through [-Werror=implicit-fallthrough=]
if (*p)
^
util/string.c:24:3: note: here
case '\0':
^~~~
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-0ophb30v9apkk6o95el0rqlq@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is not a full uncore event list, but a short list of useful
and understandable metrics.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/n/tip-c0cix4eprbldfrx5zf60suvh@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add metrics for memory and MCDRAM. Minimal metrics only for now.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/n/tip-c0cix4eprbldfrx5zf60suvh@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is not a full uncore event list, but a short list of useful
and understandable metrics.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/n/tip-c0cix4eprbldfrx5zf60suvh@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is not a full uncore event list, but a short list of useful
and understandable metrics.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/n/tip-c0cix4eprbldfrx5zf60suvh@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is not a full uncore event list, but a short list of useful
and understandable metrics.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/n/tip-c0cix4eprbldfrx5zf60suvh@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is not a full uncore event list, but a short list of useful and
understandable metrics.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/n/tip-c0cix4eprbldfrx5zf60suvh@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It was using uapi/linux/mmap.h which caused for at least one reporter,
that hasn't specified in what environment the problem manifests itself:
----
The original error is:
In file included from util/event.c:2:0:
...tools/include/uapi/linux/mman.h:4:27: fatal error: uapi/asm/mman.h:
No such file or directory
#include <uapi/asm/mman.h>
^
compilation terminated.
----
Test built it on these containers:
# dm
1 alpine:3.4: Ok
2 android-ndk:r12b-arm: Ok
3 archlinux:latest: Ok
4 centos:5: Ok
5 centos:6: Ok
6 centos:7: Ok
7 debian:7: Ok
8 debian:8: Ok
9 debian:experimental: Ok
10 debian:experimental-x-arm64: Ok
11 debian:experimental-x-mips: Ok
12 debian:experimental-x-mips64: Ok
13 debian:experimental-x-mipsel: Ok
14 fedora:20: Ok
15 fedora:21: Ok
16 fedora:22: Ok
17 fedora:23: Ok
18 fedora:24: Ok
19 fedora:24-x-ARC-uClibc: Ok
20 fedora:25: Ok
21 fedora:rawhide: Ok
22 mageia:5: Ok
23 opensuse:13.2: Ok
24 opensuse:42.1: Ok
25 opensuse:tumbleweed: Ok
26 ubuntu:12.04.5: Ok
27 ubuntu:14.04.4-x-linaro-arm64: Ok
28 ubuntu:15.10: Ok
29 ubuntu:16.04: Ok
30 ubuntu:16.04-x-arm: Ok
31 ubuntu:16.04-x-arm64: Ok
32 ubuntu:16.04-x-powerpc: Ok
33 ubuntu:16.04-x-powerpc64: Ok
34 ubuntu:16.04-x-powerpc64el: Ok
35 ubuntu:16.04-x-s390: Ok
36 ubuntu:16.10: Ok
Reported-by: David Carrillo-Cisneros <davidcc@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michal Marek <mmarek@suse.com>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: fbef103fad ("perf tools: Do hugetlb handling in more systems")
Link: http://lkml.kernel.org/n/tip-4wm5xmjz5wgbq7ucyz4dyd72@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The cases changed in this patch are for when we free but keep the
pointer to the freed area, which is not always a good idea.
Be more defensive and zero the pointer to avoid possible use after
free bugs to take more time to be detected.
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1485952447-7013-5-git-send-email-treeze.taeung@gmail.com
[ rewrote commit log ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We have zfree(&ptr) for this very common pattern:
free(ptr);
ptr = NULL;
So use it in a few more places.
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1485952447-7013-4-git-send-email-treeze.taeung@gmail.com
[ rewrote commit log ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1485952447-7013-3-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1485952447-7013-2-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf probe makes use of debug symbols, so add --symfs as the other
commands have.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kernel@pengutronix.de
Link: http://lkml.kernel.org/r/1469094512-13440-2-git-send-email-u.kleine-koenig@pengutronix.de
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
After commit 5baecbcd9c ("perf symbols: we can now read separate
debug-info files based on a build ID") and when --symfs option is used
perf failed to pick up symbols for file with the same name between host
and sysroot specified by --symfs option. One can see message like this:
bin/bash with build id 26f0062cb6950d4d1ab0fd9c43eae8b10ca42062 not found, continuing without symbols
It happens because code added by 5baecbcd9c opens files directly by
dso->long_name without symbol_conf.symfs consideration, which as result
picks one from the host. It reads its build ID and later even code finds
another proper file in directory pointed by --symfs perf ignores it
because build id mismatches.
Fix is to use __symbol__join_symfs to adjust file name according to
--symfs setting. If no --symfs passed the operation would noop and picks
the same host file as before.
Also note in latter tree after 5baecbcd9c commit additional check for
'!dso->has_build_id' was added, so to observe error condition 'perf
record' should run with --no-buildid, so perf.data itself would not have
build id for target binary in buildid perf section and 'perf report'
will pass '!dso->has_build_id' condition. Or target binary should not
have build id, but the same binary on host has build id, again
'!dso->has_build_id' will pass in this case and incorrect build id could
be read if --symfs is used.
Signed-off-by: Victor Kamensky <kamensky@cisco.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Chris Phlipot <cphlipot0@gmail.com>
Cc: Dima Kogan <dima@secretsauce.net>
Cc: He Kuang <hekuang@huawei.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: xe-linux-external@cisco.com
Fixes: 5baecbcd9c ("perf symbols: we can now read separate debug-info files based on a build ID")
Link: http://lkml.kernel.org/r/1486424908-17094-1-git-send-email-kamensky@cisco.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For debugging and testing it is useful to see the converted alias
string. Add support to perf stat/record and perf list to print the alias
conversion. The text string is saved in the alias structure. For perf
stat/record it is folded into the normal -v. For perf list -v was taken,
so we use --debug.
Before:
% perf list
...
cache:
l1d.replacement
[L1D data line replacements]
l1d_pend_miss.fb_full
[Cycles a demand request was blocked due to Fill Buffers inavailability]
After
% perf list --debug
...
cache:
l1d.replacement
[L1D data line replacements]
cpu/umask=0x1,period=2000003,event=0x51/
l1d_pend_miss.fb_full
[Cycles a demand request was blocked due to Fill Buffers inavailability]
cpu/umask=0x2,period=2000003,cmask=1,event=0x48/
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170128020345.19007-6-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The code for handling pmu aliases without specifying the PMU hardcoded
only supported the cpu PMU.
This patch extends it to work for all PMUs. We always duplicate the
event for all PMUs that have an matching alias. This allows to
automatically expand an alias for all instances of a PMU (so for example
you can monitor all cache boxes with a single event)
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170128020345.19007-5-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add support for registering json aliases per PMU. Any alias with an unit
matching the prefix is registered to the PMU. Uncore has multiple
instances of most units, so all these aliases get registered for each
individual PMU (this is important later to run the event on every
instance of the PMU).
To avoid printing the events multiple times in perf list filter out
duplicated events during printing.
v2: Rely on uncore_ prefix already in unit
v3: Document why calls were reordered
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170128020345.19007-4-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Handle the "Unit" field, which is needed to find the right PMU for an
event. We call it "pmu" and convert it to the perf pmu name with an
uncore prefix.
Handle the "ExtSel" field, which just extends the event mask with an
additional bit.
Handle the "Filter" field which adds parameters to the main event
to configure filtering.
Handle the "Unit" field which declares the unit the values should be
scaled too (similar to what the kernel exports)
Set up the "perpkg" field for uncore events so that perf knows they are
per package (similar to what the kernel exports)
Then output the fields into the pmu-events data structures which are
compiled into perf.
Filter out zero fields, except for the event itself.
v2: Fix compilation. Add uncore_ prefix at pre-processing time.
Move eventcode change to separate patch.
v3: Remove extra __maybe_unused
v4: dont duplicate aliases for cpu pmu events
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170128020345.19007-3-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The next patch needs to modify event code. Previously eventcode was just
passed through as a string. Now parse it as a number.
v2: Don't special case 0
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170128020345.19007-2-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
These two debug messages are missing the trailing newline.
Signed-off-by: He Kuang <hekuang@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Bintian Wang <bintian.wang@huawei.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/20170207073412.26983-2-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since HAVE_KPROBES can be enabled in arm64, this patch introduces
regs_query_register_offset() to convert register name to offset for
arm64, so the BPF prologue feature is ready to use.
Signed-off-by: He Kuang <hekuang@huawei.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Bintian Wang <bintian.wang@huawei.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/20170207073412.26983-1-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf_event is a utility controller whose primary role is identifying
cgroup membership to filter perf events; however, because it also
tracks some per-css state, it can't be replaced by pure cgroup
membership test. Mark the controller as implicitly enabled on the
default hierarchy so that perf events can always be filtered based on
cgroup v2 path as long as the controller is not mounted on a legacy
hierarchy.
"perf record" is updated accordingly so that it searches for both v1
and v2 hierarchies. A v1 hierarchy is used if perf_event is mounted
on it; otherwise, it uses the v2 hierarchy.
v2: Doc updated to reflect more flexible rebinding behavior.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
If dso__load_kcore frees all of the existing maps, but one has already
been attached to a callchain cursor node, then we can get a SIGSEGV in
any function that happens to try to use this invalid cursor. Use the
existing map refcount mechanism to forestall cleanup of a map until the
cursor iterates past the node.
Signed-off-by: Krister Johansen <kjlx@templeofstupid.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: stable@kernel.org
Fixes: 84c2cafa28 ("perf tools: Reference count struct map")
Link: http://lkml.kernel.org/r/20170106062331.GB2707@templeofstupid.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit 21e6d84286 ("perf diff: Use perf_hpp__register_sort_field
interface") changed list_add() to perf_hpp__register_sort_field().
This resulted in a behavior change since the field was added to the tail
instead of the head. So the -o option is mostly ignored due to its
order in the list.
This patch fixes it by adding perf_hpp__prepend_sort_field().
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Fixes: 21e6d84286 ("perf diff: Use perf_hpp__register_sort_field interface")
Link: http://lkml.kernel.org/r/20170118051457.30946-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The -o/--order option is to select column number to sort a diff result.
It does the job by adding a hpp field at the beginning of the sort list.
But it should not be added to the output field list as it has no
callbacks required by a output field.
During the setup_sorting(), the perf_hpp__setup_output_field() appends
the given sort keys to the output field if it's not there already.
Originally it was checked by fmt->list being non-empty. But commit
3f931f2c42 ("perf hists: Make hpp setup function generic") changed it
to check the ->equal callback.
Anyways, we don't need to add the pseudo hpp field to the output field
list since it won't be used for output. So just skip fields if they
have no ->color or ->entry callbacks.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Fixes: 3f931f2c42 ("perf hists: Make hpp setup function generic")
Link: http://lkml.kernel.org/r/20170118051457.30946-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Similar to for_each_subsystem and for_each_event in util/parse-events.c,
add new macro 'for_each_event' for easy iteration over the tracepoints
in order to be more compact and readable.
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1485862711-20216-2-git-send-email-treeze.taeung@gmail.com
[ Slight change to keep existing style for checking strcmp() return ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
rm_rf() doesn't modify its path argument, and a future caller will pass
a string constant into it to delete.
Signed-off-by: Joe Stringer <joe@ovn.org>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: netdev@vger.kernel.org
Link: http://lkml.kernel.org/r/20170126212001.14103-5-joe@ovn.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If dso__load_kcore frees all of the existing maps, but one has already
been attached to a callchain cursor node, then we can get a SIGSEGV in
any function that happens to try to use this invalid cursor. Use the
existing map refcount mechanism to forestall cleanup of a map until the
cursor iterates past the node.
Signed-off-by: Krister Johansen <kjlx@templeofstupid.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: stable@kernel.org
Fixes: 84c2cafa28 ("perf tools: Reference count struct map")
Link: http://lkml.kernel.org/r/20170106062331.GB2707@templeofstupid.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Previously these were being ignored, sometimes silently.
Stop doing that, emitting debug messages and handling the errors.
Testing it:
$ cat ~/.perfconfig
cat: /home/acme/.perfconfig: No such file or directory
$ perf stat -e cycles usleep 1
Performance counter stats for 'usleep 1':
938,996 cycles:u
0.003813731 seconds time elapsed
$ perf top --stdio
Error:
You may not have permission to collect system-wide stats.
Consider tweaking /proc/sys/kernel/perf_event_paranoid,
<SNIP>
[ perf record: Captured and wrote 0.019 MB perf.data (7 samples) ]
[acme@jouet linux]$ perf report --stdio
# To display the perf.data header info, please use --header/--header-only options.
# Overhead Command Shared Object Symbol
# ........ ....... ................. .........................
71.77% usleep libc-2.24.so [.] _dl_addr
27.07% usleep ld-2.24.so [.] _dl_next_ld_env_entry
1.13% usleep [kernel.kallsyms] [k] page_fault
$
$ touch ~/.perfconfig
$ ls -la ~/.perfconfig
-rw-rw-r--. 1 acme acme 0 Jan 27 12:14 /home/acme/.perfconfig
$
$ perf stat -e instructions usleep 1
Performance counter stats for 'usleep 1':
244,610 instructions:u
0.000805383 seconds time elapsed
$
[root@jouet ~]# chown acme.acme ~/.perfconfig
[root@jouet ~]# perf stat -e cycles usleep 1
Warning: File /root/.perfconfig not owned by current user or root, ignoring it.
Performance counter stats for 'usleep 1':
937,615 cycles
0.000836931 seconds time elapsed
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-j2rq96so6xdqlr8p8rd6a3jx@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
While propagating the errors from perf_config(), which were being
completely ignored, everything stopped working for people without a
~/.perfconfig file, because the perf_config_set__init() was considering
an error not to have a .perfconfig file, duh, fix it by checking the
errno after the failed stat() call.
It should also not return an error when it says it is ignoring the file,
and also a empty file should not return an error either.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 8beeb00f2c ("perf config: Use new perf_config_set__init() to initialize config set")
Link: http://lkml.kernel.org/n/tip-ygpbab3apbs6l8wr97xedwks@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As a result of commit a3497642c261 ("perf ftrace: Make 'function_graph'
be the default tracer") the ftrace.tracer variable can't be NULL but the
other code setting default tracer remained.
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1485423339-22780-1-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
- Introduce 'perf ftrace' a perf front end to the kernel's ftrace
function and function_graph tracer, defaulting to the "function_graph"
tracer, more work will be done in reviving this effort, forward porting
it from its initial patch submission (Namhyung Kim)
- Add 'e' and 'c' hotkeys to expand/collapse call chains for a single
hist entry in the 'perf report' and 'perf top' TUI (Jiri Olsa)
Fixes:
- Fix wrong register name for arm64, used in 'perf probe' (He Kuang)
- Fix map offsets in relocation in libbpf (Joe Stringer)
- Fix looking up dwarf unwind stack info (Matija Glavinic Pecotic)
Infrastructure:
- libbpf prog functions sync with what is exported via uapi (Joe Stringer)
Trivial:
- Remove unnecessary checks and assignments in 'perf probe's
try_to_find_absolute_address() (Markus Elfring)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=tYKN
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo-4.11-20170126' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull the latest perf/core updates from Arnaldo Carvalho de Melo:
New features:
- Introduce 'perf ftrace' a perf front end to the kernel's ftrace
function and function_graph tracer, defaulting to the "function_graph"
tracer, more work will be done in reviving this effort, forward porting
it from its initial patch submission (Namhyung Kim)
- Add 'e' and 'c' hotkeys to expand/collapse call chains for a single
hist entry in the 'perf report' and 'perf top' TUI (Jiri Olsa)
Fixes:
- Fix wrong register name for arm64, used in 'perf probe' (He Kuang)
- Fix map offsets in relocation in libbpf (Joe Stringer)
- Fix looking up dwarf unwind stack info (Matija Glavinic Pecotic)
Infrastructure changes:
- libbpf prog functions sync with what is exported via uapi (Joe Stringer)
Trivial changes:
- Remove unnecessary checks and assignments in 'perf probe's
try_to_find_absolute_address() (Markus Elfring)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
So that we can suppress the '-t function_graph' and get a more compact command
line:
# perf ftrace usleep 123456 | grep raw_spin_lock | sort -k2 -nr | head -5
2) 0.555 us | _raw_spin_lock();
2) 0.516 us | _raw_spin_lock();
2) 0.410 us | _raw_spin_lock_irq();
2) 0.374 us | _raw_spin_lock_irqsave();
#
Tested-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jeremy Eder <jeder@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-ss9xgx5htpxcv86x42pnh3m6@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Current trace info data lacks the saved cmdline mapping which is needed
for pevent to find out the comm of a task. Add this and bump up the
version number so that perf can determine its presence when reading.
This is mostly corresponding to trace.dat file version 6, but still
lacks 4 byte of number of cpus, and 10 bytes of type string - and I
think we don't need those anyway.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jeremy Eder <jeder@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>,
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
[ Change version test from == to >= ]
Link: http://lkml.kernel.org/n/tip-vaooqpxsikxbb3359p0corcb@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Do just like handling other cases i.e. print some debug message and
ignore the sample.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-t7kzlm3cxyvbd7d9n9554ai9@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This function will turn a libbpf pointer into a standard error code (or
0 if the pointer is valid).
This also allows removal of the dependency on linux/err.h in the public
header file, which causes problems in userspace programs built against
libbpf.
Signed-off-by: Joe Stringer <joe@ovn.org>
Acked-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: netdev@vger.kernel.org
Link: http://lkml.kernel.org/r/20170123011128.26534-5-joe@ovn.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Remove an error code assignment which is redundant in an if branch for
the handling of a memory allocation failure because the same value was
set for the local variable "err" before.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: kernel-janitors@vger.kernel.org
Link: http://lkml.kernel.org/r/0ede09ec-79b6-c8bd-5b20-02c63ed98aab@users.sourceforge.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Remove a condition check which is unnecessary at the end
because this source code place should usually only be reached
with a non-zero pointer.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: kernel-janitors@vger.kernel.org
Link: http://lkml.kernel.org/r/a3f2473b-6383-a326-bce0-b826423608b8@users.sourceforge.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add support for the __print_hex_str() macro that was added for
tracing, so that user space tools such as perf can understand
it as well.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It seems to be the most used argument for -c option so far. In the
beginning when you want to have the overall process report, so it makes
sense to make it the default one.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1484904032-11040-5-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding "Total records" column into cacheline pareto table, between
cycles and cpu info.
$ perf c2c report
...
--- ---------- cycles ---------- Total cpu
rmt hitm lcl hitm load records cnt
... ........ ........ ........ ....... ........
0 112 71 34 4
0 0 0 18 1
0 0 0 2 1
0 132 0 3 3
...
It's useful to see how many recorded samples represent each offset.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1484904032-11040-4-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently we allow only to expand or collapse all entries in the browser
with 'E' or 'C' keys. Allow user to expand or collapse only current
entry in the browser with e or c key.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1484904032-11040-3-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It will be used in following patch to expand or collapse only the
current browser entry.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1484904032-11040-2-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Using perf with call graph method dwarf fails to provide backtrace
support for stripped binary even though .gnu_debuglink points to *.dbg
flavor with properly populated debug symbols.
Problem is reproduced on ARM (v7, v8), kernels 3.14.y, 4.4.y and
4.10.rc3. Perf is configured with libunwind, and unwind dwarf support
[1]. Test code (stress_bt.c) can be found on [2].
Running (explicitly disable other unwinding methods):
$ gcc -g -o stress_bt -fomit-frame-pointer -fno-unwind-tables \
-fno-asynchronous-unwind-tables stress_bt.c
$ perf record -N --call-graph dwarf ./stress_bt
$ perf report
results in properly generated call graph. Stripping the binary and running
it results with missing call graph. Expected result is to have call graph:
$ gcc -g -o stress_bt -fomit-frame-pointer -fno-unwind-tables \
-fno-asynchronous-unwind-tables stress_bt.c
$ objcopy --only-keep-debug stress_bt stress_bt.dbg
$ objcopy --strip-debug stress_bt
$ objcopy --add-gnu-debuglink=stress_bt.dbg stress_bt
$ perf record -N --call-graph dwarf ./stress_bt
$ perf report
Problem is that perf doesn't try to read symbols pointed by gnu
debuglink. Patch adds checking, and reading of the symbols from
debuglink and symsrc. Order of the check is to first check within dso,
then check whether symsrc is defined and try to read from it. Finally,
debuglink is checked. Default locations of debug files are discussed in
[3] and [4]. Comments on RFC are on [5].
[1] https://wiki.linaro.org/LEG/Engineering/TOOLS/perf-callstack-unwinding
[2] [1]#Backtrace_stress_application
[3] https://sourceware.org/gdb/onlinedocs/gdb/Separate-Debug-Files.html
[4] https://sourceware.org/binutils/docs/binutils/objcopy.html
[5] https://lkml.org/lkml/2016/8/22/473
Signed-off-by: Matija Glavinic Pecotic <matija.glavinic-pecotic.ext@nokia.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/d309d40a-463f-482b-68e1-1465326efdc1@nokia.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The use_browser and perf_version_string variables are both declared in
perf.c but they are also referenced by other functions of libperf.a.
Therefore a user linking an own main() with libperf.a must declare those
two variables in their files even if the files never use the browser or
the version information.
This patch fixes this issue by moving use_browser and
perf_version_string out of perf.c to some other files.
Signed-off-by: Soramichi Akiyama <akiyama@m.soramichi.jp>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170117002237.c1aec0ce3b4d675dca018deb@m.soramichi.jp
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The --state option is to show task state when switched out. The state
is printed as a single character like in the /proc but I added 'I' for
idle state rather than 'R'.
$ perf sched timehist --state | head
Samples do not have callchains.
time cpu task name wait time sch delay run time state
[tid/pid] (msec) (msec) (msec)
-------- --- ----------------------- -------- ------------------ -----
1.753791 [3] <idle> 0.000 0.000 0.000 I
1.753834 [1] perf[27469] 0.000 0.000 0.000 S
1.753904 [3] perf[27470] 0.000 0.006 0.112 S
1.753914 [1] <idle> 0.000 0.000 0.079 I
1.753915 [3] migration/3[23] 0.000 0.002 0.011 S
1.754287 [2] <idle> 0.000 0.000 0.000 I
1.754335 [2] transmission[1773/1739] 0.000 0.004 0.047 S
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170113104523.31212-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Separate thread wait time into 3 parts - sleep, iowait and preempt based
on the prev_state of the last event.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170113104523.31212-1-namhyung@kernel.org
[ Fix the build on centos:5 where 'wait' shadows a global declaration ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix to probe on gcc generated functions on modules. Since
probing on a module is based on its symbol name, it should
be adjusted on actual symbols.
E.g. without this fix, perf probe shows probe definition
on non-exist symbol as below.
$ perf probe -m build-x86_64/net/netfilter/nf_nat.ko -F in_range*
in_range.isra.12
$ perf probe -m build-x86_64/net/netfilter/nf_nat.ko -D in_range
p:probe/in_range nf_nat:in_range+0
With this fix, perf probe correctly shows a probe on
gcc-generated symbol.
$ perf probe -m build-x86_64/net/netfilter/nf_nat.ko -D in_range
p:probe/in_range nf_nat:in_range.isra.12+0
This also fixes same problem on online module as below.
$ perf probe -m i915 -D assert_plane
p:probe/assert_plane i915:assert_plane.constprop.134+0
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/148411450673.9978.14905987549651656075.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add error check codes on post processing and improve it for offline
probe events as:
- post processing fails if no matched symbol found in map(-ENOENT)
or strdup() failed(-ENOMEM).
- Even if the symbol name is the same, it updates symbol address
and offset.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/148411443738.9978.4617979132625405545.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix to show correct locations for events on modules by relocating given
address instead of retrying after failure.
This happens when the module text size is big enough, bigger than
sh_addr, because the original code retries with given address + sh_addr
if it failed to find CU DIE at the given address.
Any address smaller than sh_addr always fails and it retries with the
correct address, but addresses bigger than sh_addr will get a CU DIE
which is on the given address (not adjusted by sh_addr).
In my environment(x86-64), the sh_addr of ".text" section is 0x10030.
Since i915 is a huge kernel module, we can see this issue as below.
$ grep "[Tt] .*\[i915\]" /proc/kallsyms | sort | head -n1
ffffffffc0270000 t i915_switcheroo_can_switch [i915]
ffffffffc0270000 + 0x10030 = ffffffffc0280030, so we'll check
symbols cross this boundary.
$ grep "[Tt] .*\[i915\]" /proc/kallsyms | grep -B1 ^ffffffffc028\
| head -n 2
ffffffffc027ff80 t haswell_init_clock_gating [i915]
ffffffffc0280110 t valleyview_init_clock_gating [i915]
So setup probes on both function and see what happen.
$ sudo ./perf probe -m i915 -a haswell_init_clock_gating \
-a valleyview_init_clock_gating
Added new events:
probe:haswell_init_clock_gating (on haswell_init_clock_gating in i915)
probe:valleyview_init_clock_gating (on valleyview_init_clock_gating in i915)
You can now use it in all perf tools, such as:
perf record -e probe:valleyview_init_clock_gating -aR sleep 1
$ sudo ./perf probe -l
probe:haswell_init_clock_gating (on haswell_init_clock_gating@gpu/drm/i915/intel_pm.c in i915)
probe:valleyview_init_clock_gating (on i915_vga_set_decode:4@gpu/drm/i915/i915_drv.c in i915)
As you can see, haswell_init_clock_gating is correctly shown,
but valleyview_init_clock_gating is not.
With this patch, both events are shown correctly.
$ sudo ./perf probe -l
probe:haswell_init_clock_gating (on haswell_init_clock_gating@gpu/drm/i915/intel_pm.c in i915)
probe:valleyview_init_clock_gating (on valleyview_init_clock_gating@gpu/drm/i915/intel_pm.c in i915)
Committer notes:
In my case:
# perf probe -m i915 -a haswell_init_clock_gating -a valleyview_init_clock_gating
Added new events:
probe:haswell_init_clock_gating (on haswell_init_clock_gating in i915)
probe:valleyview_init_clock_gating (on valleyview_init_clock_gating in i915)
You can now use it in all perf tools, such as:
perf record -e probe:valleyview_init_clock_gating -aR sleep 1
# perf probe -l
probe:haswell_init_clock_gating (on i915_getparam+432@gpu/drm/i915/i915_drv.c in i915)
probe:valleyview_init_clock_gating (on __i915_printk+240@gpu/drm/i915/i915_drv.c in i915)
#
# readelf -SW /lib/modules/4.9.0+/build/vmlinux | egrep -w '.text|Name'
[Nr] Name Type Address Off Size ES Flg Lk Inf Al
[ 1] .text PROGBITS ffffffff81000000 200000 822fd3 00 AX 0 0 4096
#
So both are b0rked, now with the fix:
# perf probe -m i915 -a haswell_init_clock_gating -a valleyview_init_clock_gating
Added new events:
probe:haswell_init_clock_gating (on haswell_init_clock_gating in i915)
probe:valleyview_init_clock_gating (on valleyview_init_clock_gating in i915)
You can now use it in all perf tools, such as:
perf record -e probe:valleyview_init_clock_gating -aR sleep 1
# perf probe -l
probe:haswell_init_clock_gating (on haswell_init_clock_gating@gpu/drm/i915/intel_pm.c in i915)
probe:valleyview_init_clock_gating (on valleyview_init_clock_gating@gpu/drm/i915/intel_pm.c in i915)
#
Both looks correct.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/148411436777.9978.1440275861947194930.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In 2059fc7a5a ("perf symbols: Allow forcing reading of non-root owned
files by root") 'perf report' was added the option of forcing reading of
non-root owned symbol file.
This add the same behavior for perf script.
Reported-by: Mark Drayton <mbd@fb.com>
Signed-off-by: Yannick Brosseau <scientist@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: kernel-team@fb.com
Link: http://lkml.kernel.org/r/20170113182527.18625-1-scientist@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The "--dump-raw-script" is not a valid option, replace it with the valid
one, "--dump-raw-trace"
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 133dc4c39c ("perf: Rename 'perf trace' to 'perf script'")
LPU-Reference: 728644547.14560155.1484320012612.JavaMail.zimbra@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Don't warn for feature-dwarf==0 if user explicitily disabled DWARF by
using NO_DWARF=1.
Signed-off-by: David Carrillo-Cisneros <davidcc@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20170112210159.76143-1-davidcc@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move the scale factor parsing code to an own function to reuse it in an
upcoming patch.
v2: Return error in case strdup returns NULL.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170103150833.6694-2-andi@firstfloor.org
[ Keep returning -ENOMEM when strdup() fails in perf_pmu__parse_scale()/convert_scale() ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull perf fixes from Ingo Molnar:
"Misc race fixes uncovered by fuzzing efforts, a Sparse fix, two PMU
driver fixes, plus miscellanous tooling fixes"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86: Reject non sampling events with precise_ip
perf/x86/intel: Account interrupts for PEBS errors
perf/core: Fix concurrent sys_perf_event_open() vs. 'move_group' race
perf/core: Fix sys_perf_event_open() vs. hotplug
perf/x86/intel: Use ULL constant to prevent undefined shift behaviour
perf/x86/intel/uncore: Fix hardcoded socket 0 assumption in the Haswell init code
perf/x86: Set pmu->module in Intel PMU modules
perf probe: Fix to probe on gcc generated symbols for offline kernel
perf probe: Fix --funcs to show correct symbols for offline module
perf symbols: Robustify reading of build-id from sysfs
perf tools: Install tools/lib/traceevent plugins with install-bin
tools lib traceevent: Fix prev/next_prio for deadline tasks
perf record: Fix --switch-output documentation and comment
perf record: Make __record_options static
tools lib subcmd: Add OPT_STRING_OPTARG_SET option
perf probe: Fix to get correct modname from elf header
samples/bpf trace_output_user: Remove duplicate sys/ioctl.h include
samples/bpf sock_example: Avoid getting ethhdr from two includes
perf sched timehist: Show total scheduling time
It's now possible to specify the threshold time for perf.data like:
$ perf record --switch-output=30s ...
Once it's reached, the current data are dumped in to the
perf.data.<timestamp> file and session does on.
$ perf record --switch-output=30s ...
[ perf record: dump data: Woken up 44 times ]
[ perf record: Dump perf.data.2017010213043746 ]
...
The time is expected to be a number with appended unit
character - s/m/h/d.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Wang Nan <wangnan0@huawei.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1483955520-29063-7-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding switch-output size warning if the requested
size of lower than the wakeup ring buffer size.
$ perf record --switch-output=1K ls
WARNING: switch-output data size lower than wakeup kernel buffer size (258K) expect bigger perf.data sizes
...
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Suggested-and-Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1483955520-29063-6-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
