Fixes interrupt enable condition check with which now
interrupt gets enabled in dma_open.
Prior to this patch it was getting enabled in runtime_resume only.
Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com>
Link: https://lore.kernel.org/r/20200630183754.20641-1-akshu.agrawal@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Clang warns:
In file included from sound/soc/intel/keembay/kmb_platform.c:14:
sound/soc/intel/keembay/kmb_platform.h:9:9: warning: 'KMB_PLATFORM_H_'
is used as a header guard here, followed by #define of a different
macro [-Wheader-guard]
#ifndef KMB_PLATFORM_H_
^~~~~~~~~~~~~~~
sound/soc/intel/keembay/kmb_platform.h:10:9: note: 'KMB_PLATFORMP_H_'
is defined here; did you mean 'KMB_PLATFORM_H_'?
#define KMB_PLATFORMP_H_
^~~~~~~~~~~~~~~~
KMB_PLATFORM_H_
1 warning generated.
Fix the typo so that the header guard works as intended.
Fixes: c5477e9667 ("ASoC: Intel: Add KeemBay platform driver")
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Cc: Sia, Jee Heng <jee.heng.sia@intel.com>; alsa-devel@alsa-project.org; linux-kernel@vger.kernel.org; clang-built-linux@googlegroups.com; Nathan Chancellor <natechancellor@gmail.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/1053
To: Rojewski, Cezary <cezary.rojewski@intel.com>; Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>; Liam Girdwood <liam.r.girdwood@linux.intel.com>; Jie Yang <yang.jie@linux.intel.com>; Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20200617010232.23222-1-natechancellor@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When there is dedicated power domain bound with device, after probing
the power will be disabled, then registers are not accessible in
fsl_sai_dai_probe(), so regcache only need to be enabled in end of
probe() and regcache_mark_dirty should be moved to pm runtime resume
callback function.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/1593412953-10897-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The adc_vol_tlv volume-control has a range from -17.625 dB to +30 dB,
not -176.25 dB to + 300 dB. This wrong scale is esp. a problem in userspace
apps which translate the dB scale to a linear scale. With the logarithmic
dB scale being of by a factor of 10 we loose all precision in the lower
area of the range when apps translate things to a linear scale.
E.g. the 0 dB default, which corresponds with a value of 47 of the
0 - 127 range for the control, would be shown as 0/100 in alsa-mixer.
Since the centi-dB values used in the TLV struct cannot represent the
0.375 dB step size used by these controls, change the TLV definition
for them to specify a min and max value instead of min + stepsize.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20200628155231.71089-5-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Lenovo Miix 2 10 has a keyboard dock with extra speakers in the dock.
Rather then the ACL5672's GPIO1 pin being used as IRQ to the CPU, it is
actually used to enable the amplifier for these speakers
(the IRQ to the CPU comes directly from the jack-detect switch).
Add a quirk for having an ext speaker-amplifier enable pin on GPIO1
and replace the Lenovo Miix 2 10's dmi_system_id table entry's wrong
GPIO_DEV quirk (which needs to be renamed to GPIO1_IS_IRQ) with the
new RT5670_GPIO1_IS_EXT_SPK_EN quirk, so that we enable the external
speaker-amplifier as necessary.
Also update the ident field for the dmi_system_id table entry, the
Miix models are not Thinkpads.
Fixes: 67e03ff3f3 ("ASoC: codecs: rt5670: add Thinkpad Tablet 10 quirk")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1786723
Link: https://lore.kernel.org/r/20200628155231.71089-4-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The RT5670_PWR_ANLG1 register has 3 bits to select the LDO voltage,
so the correct mask is 0x7 not 0x3.
Because of this wrong mask we were programming the ldo bits
to a setting of binary 001 (0x05 & 0x03) instead of binary 101
when moving to SND_SOC_BIAS_PREPARE.
According to the datasheet 001 is a reserved value, so no idea
what it did, since the driver was working fine before I guess we
got lucky and it does something which is ok.
Fixes: 5e8351de74 ("ASoC: add RT5670 CODEC driver")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200628155231.71089-3-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The default mode for SSP configuration is TDM 4 slot and so far we were
using this for the bus format on cht-bsw-rt56732 boards.
One board, the Lenovo Miix 2 10 uses not 1 but 2 codecs connected to SSP2.
The second piggy-backed, output-only codec is inside the keyboard-dock
(which has extra speakers). Unlike the main rt5672 codec, we cannot
configure this codec, it is hard coded to use 2 channel 24 bit I2S.
Using 4 channel TDM leads to the dock speakers codec (which listens in on
the data send from the SSP to the rt5672 codec) emiting horribly distorted
sound.
Since we only support 2 channels anyways, there is no need for TDM on any
cht-bsw-rt5672 designs. So we can simply use I2S 2ch everywhere.
This commit fixes the Lenovo Miix 2 10 dock speakers issue by changing
the bus format set in cht_codec_fixup() to I2S 2 channel.
This change has been tested on the following devices with a rt5672 codec:
Lenovo Miix 2 10
Lenovo Thinkpad 8
Lenovo Thinkpad 10 (gen 1)
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Cc: stable@vger.kernel.org
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1786723
Link: https://lore.kernel.org/r/20200628155231.71089-2-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add Vsense slot configuration based on the device tree. Adding this
property enables the slot programming to be moved to the tdm_set_slot
callback. This in affect sets the slots for the Isense and Vsense and
enabling this these modes are now based on whether these features were
powered on or not.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200626154143.20351-3-dmurphy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add programming for the tdm slots for the right and left. This also
requires configuring the RX/TX offsets for the DAI format type.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200626154143.20351-1-dmurphy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When building on allyesconfig kernel for a NO_DMA=y platform (e.g.
Sun-3), CONFIG_SND_SOC_QCOM_COMMON=y, but CONFIG_SND_SOC_QDSP6_AFE=n,
leading to a link failure:
sound/soc/qcom/common.o: In function `qcom_snd_parse_of':
common.c:(.text+0x2e2): undefined reference to `q6afe_is_rx_port'
While SND_SOC_QDSP6 depends on HAS_DMA, SND_SOC_MSM8996 and SND_SOC_SDM845
don't, so the following warning is seen:
WARNING: unmet direct dependencies detected for SND_SOC_QDSP6
Depends on [n]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && QCOM_APR [=y] && HAS_DMA [=n]
Selected by [y]:
- SND_SOC_MSM8996 [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && QCOM_APR [=y]
- SND_SOC_SDM845 [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && QCOM_APR [=y] && CROS_EC [=y] && I2C [=y] && SOUNDWIRE [=y]
Until recently, this warning was harmless (from a compile-testing
point-of-view), but the new user of q6afe_is_rx_port() turned this into
a hard failure.
As the QDSP6 driver itself builds fine if NO_DMA=y, and it depends on
QCOM_APR (which in turns depends on ARCH_QCOM || COMPILE_TEST), it is
safe to increase compile testing coverage. Hence fix the link failure
by dropping the HAS_DMA dependency of SND_SOC_QDSP6.
Fixes: a212008925 ("ASoC: qcom: common: set correct directions for dailinks")
Fixes: 6b1687bf76 ("ASoC: qcom: add sdm845 sound card support")
Fixes: a6f933f63f ("ASoC: qcom: apq8096: Add db820c machine driver")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20200629122443.21736-1-geert@linux-m68k.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add max98373-sdw helper function, which configures 2x MAX98373 codecs to
Link1. This patch shares code between the I2S and SoundWire modes of
MAX98373 and adds the trigger already added for I2S.
Signed-off-by: Rander Wang <rander.wang@linux.intel.com>
Signed-off-by: Naveen Manohar <naveen.m@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20200625192620.4312-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
RT5682 is in Soundwire mode on Link0 & 2x MAX98373 on link1.
Signed-off-by: Naveen Manohar <naveen.m@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@linux.intel.com>
Link: https://lore.kernel.org/r/20200625192708.4416-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Silence documentation build warning by correcting kernel-doc comment
for snd_soc_runtime_action.
./sound/soc/soc-pcm.c:220: warning: Function parameter or member 'action' not described in 'snd_soc_runtime_action'
Signed-off-by: Colton Lewis <colton.w.lewis@protonmail.com>
Link: https://lore.kernel.org/r/20200626053953.68797-1-colton.w.lewis@protonmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch updates tx_mask, so that (0-3)slots are reserved for
Maxim amps to feedback data.
V0->slot0,
I0->slot1,
V1->slot2,
I1->slot3.
also update slot_width in tdm configuration to 24 as the BE
configuration is 24 in topology.
Signed-off-by: Dharageswari R <dharageswari.r@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20200625191308.3322-14-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
for_each_card_prelinks() is a common API to walk through each prelink
in the card.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20200625191308.3322-13-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When the cml_rt1011_rt5682_dailink[].codecs pointer is overridden by
a quirk with a devm allocated structure and the probe is deferred,
in the next probe we will see an use-after-free condition
(verified with KASAN). This can be avoided by using statically allocated
configurations - which simplifies the code quite a bit as well.
KASAN issue fixed.
[ 23.301373] cml_rt1011_rt5682 cml_rt1011_rt5682: sof_rt1011_quirk = f
[ 23.301875] ==================================================================
[ 23.302018] BUG: KASAN: use-after-free in snd_cml_rt1011_probe+0x23a/0x3d0 [snd_soc_cml_rt1011_rt5682]
[ 23.302178] Read of size 8 at addr ffff8881ec6acae0 by task kworker/0:2/105
[ 23.302320] CPU: 0 PID: 105 Comm: kworker/0:2 Not tainted 5.7.0-rc7-test+ #3
[ 23.302322] Hardware name: Google Helios/Helios, BIOS 01/21/2020
[ 23.302329] Workqueue: events deferred_probe_work_func
[ 23.302331] Call Trace:
[ 23.302339] dump_stack+0x76/0xa0
[ 23.302345] print_address_description.constprop.0.cold+0xd3/0x43e
[ 23.302351] ? _raw_spin_lock_irqsave+0x7b/0xd0
[ 23.302355] ? _raw_spin_trylock_bh+0xf0/0xf0
[ 23.302362] ? snd_cml_rt1011_probe+0x23a/0x3d0 [snd_soc_cml_rt1011_rt5682]
[ 23.302365] __kasan_report.cold+0x37/0x86
[ 23.302371] ? snd_cml_rt1011_probe+0x23a/0x3d0 [snd_soc_cml_rt1011_rt5682]
[ 23.302375] kasan_report+0x38/0x50
[ 23.302382] snd_cml_rt1011_probe+0x23a/0x3d0 [snd_soc_cml_rt1011_rt5682]
[ 23.302389] platform_drv_probe+0x66/0xc0
Fixes: 629ba12e99 ("ASoC: Intel: boards: split woofer and tweeter support")
Suggested-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Fred Oh <fred.oh@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200625191308.3322-12-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for max98360a speaker amp on SSP1 and ALC5682 on SSP0
for jsl+ platform.
Signed-off-by: Yong Zhi <yong.zhi@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200625191308.3322-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
MAX_98373_DEV0_NAME is the Right speaker and MAX_98373_DEV1_NAME is the
Left speaker, hence updating the comments for max98373 dailink components
accordingly.
Signed-off-by: Dharageswari R <dharageswari.r@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20200625191308.3322-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Speaker amplifier feedback is not modeled as being dependent on any
active output. Even when there is no playback happening, parts of the
graph, specifically the IV sense->speaker protection->output remains
active and this prevents the DSP from entering low-power states.
This patch suggests a machine driver level approach where the speaker
pins are enabled/disabled dynamically depending on stream start/stop
events. DPAM graph representations show the feedback loop is indeed
disabled and low-power states can be reached.
Signed-off-by: Dharageswari R <dharageswari.r@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20200625191308.3322-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We don't need an explicit cast, using the right format is simple
enough.
Suggested-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200625191308.3322-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
During the bring-up of new platforms, or to take care of specific
hardware reworks, it's useful to add a kernel parameter to override
the default DMI-based quirks.
For example, adding the following line in a .conf file in
/etc/modprobe.d/ will change the default quirk and log the changes if
dynamic debug is enabled.
options snd_soc_sof_sdw quirk=0x802
[ 735.025785] sof_sdw sof_sdw: Overriding quirk 0x10 => 0x802
[ 735.025787] sof_sdw sof_sdw: quirk realtek,jack-detect-source 2
[ 735.025790] sof_sdw sof_sdw: quirk SOF_RT715_DAI_ID_FIX enabled
Tested on ICL RVP with add-on board instead of default codec.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200625191308.3322-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This field is required for ASoC cards. Not setting it will result in a
module->name pointer being NULL and generate problems such as
cat /proc/asound/modules
0 (efault)
Fixes: 76016322ec ('ASoC: Intel: Add Broxton-P machine driver')
Reported-by: Jaroslav Kysela <perex@perex.cz>
Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200625191308.3322-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This field is required for ASoC cards. Not setting it will result in a
module->name pointer being NULL and generate problems such as
cat /proc/asound/modules
0 (efault)
Fixes: 52db12d193 ('ASoC: Intel: boards: add sof_sdw machine driver')
Reported-by: Jaroslav Kysela <perex@perex.cz>
Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200625191308.3322-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This field is required for ASoC cards. Not setting it will result in a
module->name pointer being NULL and generate problems such as
cat /proc/asound/modules
0 (efault)
Fixes: 17fe95d6df ('ASoC: Intel: boards: Add CML m/c using RT1011 and RT5682')
Reported-by: Jaroslav Kysela <perex@perex.cz>
Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200625191308.3322-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This field is required for ASoC cards. Not setting it will result in a
module->name pointer being NULL and generate problems such as
cat /proc/asound/modules
0 (efault)
Fixes: 8017b8fd37 ('ASoC: SOF: Add Nocodec machine driver support')
Reported-by: Jaroslav Kysela <perex@perex.cz>
Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200625191308.3322-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To fix compilation error:
error: implicit declaration of function 'ACPI_PTR'
[-Werror,-Wimplicit-function-declaration]
.acpi_match_table = ACPI_PTR(rt1015_acpi_match),
^
Adds the missing header "acpi.h" inclusion and sorts in alphabetical.
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20200625153543.85039-4-tzungbi@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix the issue found that there is an extra space before a comma in the
volume control.
Fixes: bf726b1c86 ("ASoC: tas2562: Add support for digital volume control")
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200624174932.9604-4-dmurphy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Update the shutdown GPIO property to be shutdown from shut-down.
Fixes: c173dba44c ("ASoC: tas2562: Introduce the TAS2562 amplifier")
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200624174932.9604-3-dmurphy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To turn the headphone output switch off during jack type detection, it
could avoid the pop noise when jack type switches to OMTP type.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20200623125312.27896-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
While looking at reboot issues and module load/unload tests, I found
out some resources allocated in the dailink .init() callback are not
properly released - there is no existing mechanism in the soc-core to
do so.
The addition of a dailink .exit() callback seems to be the simplest
solution overall. It can be argued that the existing machine platform
device .remove() callback can also perform the necessary cleanups,
however as shown in the last two examples this might require a loop to
identify components whereas the dailink .exit() already has all the
necessary information to revert the actions done in the .init() step.
Changes since RFC:
Better commit messages and explanations
rt5682 cases with snd_soc_component_set_jack() called in the .exit()
Fred Oh (2):
ASoC: intel: sof_rt5682: move disabling jack to dai link's exit()
ASoC: intel: cml_rt1011_rt5682: disable jack in dailink .exit()
Pierre-Louis Bossart (3):
ASoC: soc-link: introduce exit() callback
ASoC: Intel: bdw-rt5677: fix module load/unload issues
ASoC: Intel: kbl-rt5660: use .exit() dailink callback to release gpiod
include/sound/soc-link.h | 1 +
include/sound/soc.h | 3 +++
sound/soc/intel/boards/bdw-rt5677.c | 18 ++++++++++++++--
sound/soc/intel/boards/cml_rt1011_rt5682.c | 8 ++++++++
sound/soc/intel/boards/kbl_rt5660.c | 17 +++++++++++++--
sound/soc/intel/boards/sof_rt5682.c | 24 ++++++++--------------
sound/soc/soc-core.c | 3 +++
sound/soc/soc-link.c | 6 ++++++
8 files changed, 60 insertions(+), 20 deletions(-)
base-commit: 39853b1438
--
2.20.1
KASAN throws the following warning in rt1011.c:
[ 170.777603] BUG: KASAN: stack-out-of-bounds in _find_next_bit.constprop.0+0x3e/0xf0
find_next_bit() relies on unsigned long pointer arguments, but this driver
uses a type cast that generates the KASAN warning. Replace find_next_bit()
and find_last_bit() with __ffs() and __fls() to pass the value and avoid
casting pointers to make the warning go away.
Signed-off-by: Fred Oh <fred.oh@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20200622151348.28063-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The "ret" in fsl_easrc_set_ctx_format is not initialized, then
the unknown value maybe returned by this function.
Fixes: 955ac62405 ("ASoC: fsl_easrc: Add EASRC ASoC CPU DAI drivers")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/1592816611-16297-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When removing the machine driver, the rt5682 jack handler will oops if jack
detection is not disabled. The jack can be disabled in the dai link's exit().
This is symmetrical change as jack is enabled in init().
Signed-off-by: Fred Oh <fred.oh@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20200622154241.29053-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Move disabling jack from platform driver's remove() to dai link's exit().
This is symmetrical change as jack is enabled in init().
Signed-off-by: Fred Oh <fred.oh@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20200622154241.29053-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The gpiod handling is inspired from the bdw-rt5677 code. Apply same
fix to avoid reference count issue while removing modules for
consistency.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Curtis Malainey <curtis@malainey.com>
Link: https://lore.kernel.org/r/20200622154241.29053-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The mainline code currently prevents modules from being removed.
The BE dailink .init() function calls devm_gpiod_get() using the codec
component device as argument. When the machine driver is removed, the
references to the gpiod are not released, and it's not possible to
remove the codec driver module - which is the only entity which could
free the gpiod.
This conceptual deadlock can be avoided by invoking gpiod_get() in the
.init() callback, and calling gpiod_put() in the exit() callback.
Tested on SAMUS Chromebook with SOF driver.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Curtis Malainey <curtis@malainey.com>
Link: https://lore.kernel.org/r/20200622154241.29053-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some machine drivers allocate or request resources with
snd_soc_link_init() phase of the card probe. These resources need to
be properly released when removing a card, and this patch suggests a
dual exit() callback.
The exit() is invoked in soc_remove_pcm_runtime(), which is not
completely symmetric with the init() invoked in soc_init_pcm_runtime().
Alternate solutions were considered, e.g. adding a .remove() callback
for the platform driver, but that's not symmetrical at all and would
be difficult to handle if there are more than one dailink implementing
an .init(). We looked also into using .remove_dai_link() callback, but
that would also be imbalanced.
Note that because of the error handling in snd_soc_bind_card(), which
jumps to probe_end, there is no way to guarantee the exit() is invoked
with resources allocated in the init(). Prior to releasing those
resources, implementations of the exit() callback shall check the
resources are valid.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Curtis Malainey <curtis@malainey.com>
Link: https://lore.kernel.org/r/20200622154241.29053-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Because clk_prepare_enable and clk_disable_unprepare should
check input clock parameter is NULL or not internally, then
we don't need to check them before calling the function.
Fixes: 9e28f6532c ("ASoC: fsl_mqs: Add MQS component driver")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/743be216bd504c26e8d45d5ce4a84561b67a122b.1592888591.git.shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
