Commit graph

82 commits

Author SHA1 Message Date
Jaswinder Singh Rajput
39558c8f8e includecheck fix: drivers/scsi, libfcoe.c
fix the following 'make includecheck' warning:

  drivers/scsi/fcoe/libfcoe.c: linux/netdevice.h is included more than once.

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
LKML-Reference: <1247066936.4382.76.camel@ht.satnam>
2009-09-20 16:01:02 +05:30
Joe Eykholt
e7a51997da [SCSI] fcoe: flush per-cpu thread work when destroying interface
This fixes one cause of an occational problem when unloading
libfc where the exchange manager pool doesn't have all items freed.

The existing WARN_ON(mp->total_exches <= 0) isn't hit.
However, note that total_exches is decremented when the
exchange is completed, and it can be held with a refcnt
for a while after that.

I'm not sure what the offending exchange is, but I suspect
it is an incoming request, because outgoing state machines
should be all stopped at this point.

Note that although receive is stopped before the exchange
manager is freed, there could still be active threads
handling received frames.

This patch flushes the queues by allocating a new skb
and sending it through, and have the thread handle
this new skb specially.  This is similar to the way the work
queues are flushed now by putting work items in them and waiting
until they make it through the queue.

An skb->destructor function is used to inform us of
the completion of the flush, and the fr_dev() is left
NULL to indicate to fcoe_percpu_receive_thread() that
the skb should be just freed.  There's already a check
for the lp being NULL which prints a message.
We skip printing the message if the destructor is for flushing.

Signed-off-by: Joe Eykholt <jeykholt@cisco.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-10 12:08:04 -05:00
Chris Leech
090eb6c41a [SCSI] fcoe: use rtnl mutex in place of hostlist lock
This just cuts down on the number of locks we're dealing with, and
eliminates the need to take another lock in the netdev notifier.

Signed-off-by: Chris Leech <christopher.leech@intel.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-10 12:07:38 -05:00
Chris Leech
2e70e24151 [SCSI] fcoe: Fix module ref count bug by adding NETDEV UNREGISTER handling
Fixes reference counting on fcoe_instance and net_device, and adds
NETDEV_UNREGISTER notifier handling so that you can unload network drivers.
FCoE no longer increments the module use count for the network driver.

On an NETDEV_UNREGISTER event, destroying the FCoE instance is deferred to a
workqueue context to avoid RTNL deadlocks.

Based in part by an earlier patch from John Fastabend

John's patch description:
Currently, the netdev module ref count is not decremented with module_put()
when the module is unloaded while fcoe instances are present. To fix this
removed reference count on netdev module completely and added functionality to
netdev event handling for NETDEV_UNREGISTER events.

This allows fcoe to remove devices cleanly when the netdev module is unloaded
so we no longer need to hold a reference count for the netdev module.

Signed-off-by: Chris Leech <christopher.leech@intel.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-10 12:07:38 -05:00
Chris Leech
c863df33bb [SCSI] fcoe: move the host-list add/remove to keep out VN_Ports
We only want the FCoE create and destroy routines to deal with top level
N_Ports, the VN_Ports are tracked on the vport list (see scsi_transport_fc).

Signed-off-by: Chris Leech <christopher.leech@intel.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-10 12:07:37 -05:00
Chris Leech
dfc1d0fe3a [SCSI] fcoe: add mutex to protect create and destroy
Rather than rely on the hostlist_lock to be held while creating exchange
managers, serialize fcoe instance creation and destruction with a mutex.
This will allow the hostlist addition to be moved out of fcoe_if_create(),
which will simplify NPIV support.

Signed-off-by: Chris Leech <christopher.leech@intel.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-10 12:07:36 -05:00
Chris Leech
54b649f88e [SCSI] fcoe: split out per interface setup
fcoe_netdev_config() is called during initialization of a libfc instance.
Much of what was there only needs to be done once for each net_device.
The same goes for the corresponding cleanup.

The FIP controller initialization is moved to interface creation time.
Otherwise it will keep getting re-initialized for every VN_Port once NPIV is
enabled.

fcoe_if_destroy() has some reordering to deal with the changes.  Receives are
not stopped until after fcoe_interface_put() is called, but transmits must be
stopped before.  So there is some care to stop libfc transmits and the
transmit backlog timer, then call fcoe_interface_put which will stop receives
and cleanup the FIP controller, then the receive queues can be cleaned and the
port freed.

Signed-off-by: Chris Leech <christopher.leech@intel.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-10 12:07:35 -05:00
Chris Leech
030f4e001f [SCSI] fcoe: fcoe_interface create, destroy and refcounting
Up to this point the fcoe_instance structure was simply kzalloc/kfreed.  This
patch introduces create and destroy functions as well as kref based reference
counting.  The create function will grow as the initialization code is moved
there.

Signed-off-by: Chris Leech <christopher.leech@intel.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-10 12:07:35 -05:00
Chris Leech
cb0a6ca814 [SCSI] fcoe: remove fcoe_interface->priv pointer
The priv pointer is no longer needed, and once NPIV is enabled
fcoe_interface:fc_lport becomes a one-to-many relationship.

Remove the single pointer.

Signed-off-by: Chris Leech <christopher.leech@intel.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-10 12:07:34 -05:00
Chris Leech
991cbb6082 [SCSI] fcoe: move offload exchange manager pointer from fcoe_port to fcoe_interface
The offload EM pointer is only used when setting up a new libfc instance, but
as it's designed to be shared among NPIV VN_Ports it should be tracked in
fcoe_interface.

With the host-list changed to track fcoe_interfaces as well, this is needed
before we can remove the priv pointer from that structure (which is only there
to help in the transition, and stops making sense once NPIV is enabled).

Signed-off-by: Chris Leech <christopher.leech@intel.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-10 12:07:33 -05:00
Chris Leech
3fe9a0bada [SCSI] fcoe: move FIP controller from fcoe_port to fcoe_interface
There is only one FIP state per net_device, so the FIP controller needs to be
moved from the per-SCSI-host fcoe_port to the per-net_device fcoe_interface
structure.

Signed-off-by: Chris Leech <christopher.leech@intel.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-10 12:07:33 -05:00
Chris Leech
259ad85d8d [SCSI] fcoe: move packet handlers from fcoe_port to fcoe_interface
The packet handlers need to be tracked in fcoe_interface so there is only one
set per net_device.  When NPIV is enabled there will be multiple SCSI hosts
and multiple fcoe_port structures on a single net_device.

The packet handlers match by ethertype and netdev.  If the same handler gets
registered on a single netdev multiple times, the receive function will be
called multiple times for each frame.

Signed-off-by: Chris Leech <christopher.leech@intel.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-10 12:07:32 -05:00
Chris Leech
250249898a [SCSI] fcoe: move netdev to fcoe_interface
The network interface needs to be shared between all NPIV VN_Ports, therefor
it should be tracked in the fcoe_interface and not for each SCSI host in
fcoe_port.

Signed-off-by: Chris Leech <christopher.leech@intel.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-10 12:07:32 -05:00
Chris Leech
014f5c3f56 [SCSI] fcoe: Introduce and allocate fcoe_interface structure, 1:1 with net_device
In preparation for NPIV support, I'm splitting the fcoe instance structure
into two to remove the assumptions about it being 1:1 with the net_device.
There will now be two structures, one which is 1:1 with the underlying
net_device and one which is allocated per virtual SCSI/FC host.

fcoe_softc is renamed to fcoe_port for the per Scsi_Host FCoE private data.

Later patches with start moving shared stuff from fcoe_port to fcoe_interface

Signed-off-by: Chris Leech <christopher.leech@intel.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-10 12:07:31 -05:00
Chris Leech
af7f85d95a [SCSI] fcoe: interface changes to fcoe_if_create and fcoe_if_destroy
By passing in the parent device instead of assuming the netdev is what
should be used, fcoe_if_create becomes usable for NPIV vports as well.
You still need a netdev, because that's how FCoE works.  Also removed some
duplicate checks from fcoe_if_create that are already in fcoe_create.

fcoe_if_destroy needs to take an lport as it's only argument, not a netdev.
That removes the 1:1 netdev:lport assumption from the destroy path.

Signed-off-by: Chris Leech <christopher.leech@intel.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-10 12:07:31 -05:00
Joe Eykholt
36eb7fc872 [SCSI] fcoe: remove unnecessary list and lock initializations.
The hostlist and the hostlist_lock were initialized both in
the delcaration and in fcoe_init().  Remove the unneeded code.

Signed-off-by: Joe Eykholt <jeykholt@cisco.com>
Signed-off-by: Chris Leech <christopher.leech@intel.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-10 12:07:29 -05:00
Chris Leech
5892c32f8a [SCSI] fcoe: fix missing error check in call to fcoe_if_init
fcoe_if_init() can fail, but it's return value wasn't checked

Signed-off-by: Chris Leech <christopher.leech@intel.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-10 12:07:28 -05:00
Chris Leech
a4b7cfaee4 [SCSI] libfcoe: fcoe_ctlr_destroy use cancel_work_sync instead of flush_work
Use cancel_work_sync() in place of flush_work(), so that
fcoe_ctlr_destroy() can be called from a workqueue.

Also, purge the receive queue after the recv_work has been cancled because
if recv_work isn't run it's not guaranteed to be empty now.

Signed-off-by: Chris Leech <christopher.leech@intel.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-10 12:07:28 -05:00
Yi Zou
05cc739073 [SCSI] fcoe: Add sysfs parameter to fcoe for minimum DDP read I/O size
This adds fcoe_ddp_min as a module parameter for fcoe module to:
/sys/module/fcoe/parameters/ddp_min

It is observed that for some hardware, particularly Intel 82599, there is too
much overhead in setting up context for direct data placement (DDP) read when
the requested read I/O size is small. This is added as a module parameter for
performance tuning and is set as 0 by default and user can change this based
on their own hardware.

Signed-off-by: Yi Zou <yi.zou@intel.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-10 12:07:27 -05:00
Vasu Dev
b2f0091fbf [SCSI] fcoe, libfc: fully makes use of per cpu exch pool and then removes em_lock
1. Updates fcoe_rcv() to queue incoming frames to the fcoe per
   cpu thread on which this frame's exch was originated and simply
   use current cpu for request exch not originated by initiator.
   It is redundant to add this code under CONFIG_SMP, so removes
   CONFIG_SMP uses around this code.

2. Updates fc_exch_em_alloc, fc_exch_delete, fc_exch_find to use
   per cpu exch pools, here fc_exch_delete is rename of older
   fc_exch_mgr_delete_ep since ep/exch are now deleted in pools
   of EM and so brief new name is sufficient and better name.

   Updates these functions to map exch id to their index into exch
   pool using fc_cpu_mask, fc_cpu_order and EM min_xid.
   This mapping is as per detailed explanation about this in
   last patch and basically this is just as lower fc_cpu_mask
   bits of exch id as cpu number and upper bit sum of EM min_xid
   and exch index in pool.

   Uses pool next_index to keep track of exch allocation from
   pool along with pool_max_index as upper bound of exches array
   in pool.

3. Adds exch pool ptr to fc_exch to free exch to its pool in
   fc_exch_delete.

4. Updates fc_exch_mgr_reset to reset all exch pools of an EM,
   this required adding fc_exch_pool_reset func to reset exches
   in pool and then have fc_exch_mgr_reset call fc_exch_pool_reset
   for each pool within each EM for a lport.

5. Removes no longer needed exches array, em_lock, next_xid, and
   total_exches from struct fc_exch_mgr, these are not needed after
   use of per cpu exch pool, also removes not used max_read,
   last_read from struct fc_exch_mgr.

6. Updates locking notes for exch pool lock with fc_exch lock and
   uses pool lock in exch allocation, lookup and reset.

Signed-off-by: Vasu Dev <vasu.dev@intel.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-05 09:47:37 -05:00
Vasu Dev
e4bc50bedf [SCSI] fcoe, libfc: adds per cpu exch pool within exchange manager(EM)
Adds per cpu exch pool for these reasons:-

 1. Currently an EM instance is shared across all cpus to manage
    all exches for all cpus. This required em_lock across all
    cpus for an exch alloc, free, lookup and reset each frame
    and that made em_lock expensive, so instead having per cpu
    exch pool with their own per cpu pool lock will likely reduce
    locking contention in fast path for an exch alloc, free and
    lookup.

 2. Per cpu exch pool will likely improve cache hit ratio since
    all frames of an exch will be processed on the same cpu on
    which exch originated.

This patch is only prep work to help in keeping complexity of next
patch low, so this patch only sets up per cpu exch pool and related
helper funcs to be used by next patch. The next patch fully makes
use of per cpu exch pool in all code paths ie. tx, rx and reset.

Divides per EM exch id range equally across all cpus to setup per
cpu exch pool. This division is such that lower bits of exch id
carries cpu number info on which exch originated, later a simple
bitwise AND operation on exch id of incoming frame with fc_cpu_mask
retrieves cpu number info to direct all frames to same cpu on which
exch originated. This required a global fc_cpu_mask and fc_cpu_order
initialized to max possible cpus number nr_cpu_ids rounded up to 2's
power, this will be used in mapping exch id and exch ptr array
index in pool during exch allocation, find or reset code paths.

Adds a check in fc_exch_mgr_alloc() to ensure specified min_xid
lower bits are zero since these bits are used to carry cpu info.

Adds and initializes struct fc_exch_pool with all required fields
to manage exches in pool.

Allocates per cpu struct fc_exch_pool with memory for exches array
for range of exches per pool. The exches array memory is followed
by struct fc_exch_pool.

Adds fc_exch_ptr_get/set() helper functions to get/set exch ptr in
pool exches array at specified array index.

Increases default FCOE_MAX_XID to 0x0FFF from 0x07EF, so that more
exches are available per cpu after above described exch id range
division across all cpus to each pool.

Signed-off-by: Vasu Dev <vasu.dev@intel.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-05 09:47:36 -05:00
Joe Eykholt
a69b06bc5e [SCSI] fcoe: libfcoe: extra semicolon in CHECK_LOGGING macros causes compile error
If using code like this:
	if (foo)
		FCOE_DBG("foo\n);
	else
		FCOE_DBG("bar\n");

one gets compile errors because FCOE_DBG expands with its own semicolon,
making one too many for the if-statement.

Remove the offending semicolon in fcoe.h and also a similar case
in libfcoe.c.

Signed-off-by: Joe Eykholt <jeykholt@cisco.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-05 09:47:34 -05:00
Robert Love
ee610c6701 [SCSI] fcoe: Add format spacing to FCOE_NETDEV_DBG debug macro
There's currently no space between the interface name and the
user specified format/string. This patch adds a space and a colon
to the output to separate the interface name and the user
specified string.

So, instead of "ethXfoo" it will read "ethX: foo".

Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-05 09:47:30 -05:00
Vasu Dev
1d1b88dc01 [SCSI] fcoe: removes phys_dev and renames real_dev to netdev.
The phys_dev was used only to locate common offload EM instance for all
FCoE instances on a eth devices in function fcoe_em_config, so just updated
fcoe_em_config to look for actual real eth device in locating common offload
EM instance and then no need to store phys_dev in fcoe_softc, so removes
phys_dev from fcoe_softc also.

Renames fcoe_softc real_dev to netdev and updates all its uses to use netdev.

So effectively no functional change, use of single netdev instead phys_dev
and real_dev saves one pointer memory in fcoe_softc, also real_dev used here
was confusing with vlan driver terminology since real_dev in vlan driver is
referred to physical eth device.

Signed-off-by: Vasu Dev <vasu.dev@intel.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-08-22 17:52:11 -05:00
Yi Zou
15a521b424 [SCSI] fcoe: Remove ifdef for NETIF_F_FCOE_CRC and NETIF_F_FSO
Remove the extra ifdef for NETIF_F_FSO and NETIF_F_FCOE_CRC since they are
already defined in the current kernel as in include/linux/netdevice.h.

Signed-off-by: Yi Zou <yi.zou@intel.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-08-22 17:52:10 -05:00
Vasu Dev
d7179680d0 [SCSI] fcoe, libfc: adds offload EM per eth device with only single xid range per EM
Updates fcoe_em_config to allocate a single instance of sharable offload
EM for supported lp->lro_xid per eth device, and then share this EM
for subsequently more lports creation on same eth device (e.g when using
VLAN).

Adds tiny fcoe_oem_match function for offload EM to return true for read
types IO to have read IO exchanges allocated from offload shared EM.

Removes fc_em_alloc_xid function completely which was needed to manage
two xid ranges within a EM, this is not needed any more with allocation
of separate sharable offload EM per eth device. Instead this patch adds
simple xid allocation logic to manage single xid range.

Adds fc_exch_em_alloc with mp->next_xid as cursor to allocate new xid
from single xid range of EM, uses mp->next_xid instead removed mp->last_xid
which slightly increase probability of finding empty xid on exch allocation.

Removes restriction of not allowing use of xid zero along with changing
two xid range change to single xid range.

Makes fc_fcp_ddp_setup calling conditional to only xid allocated from
shared offload EM.

Signed-off-by: Vasu Dev <vasu.dev@intel.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-08-22 17:52:09 -05:00
Vasu Dev
e8af4d4380 [SCSI] fcoe: modifies fcoe_hostlist_lock uses as prep work to add shared offload EM
Modifies fcoe_hostlist_lock uses such that a new EM allocation in
fcoe_em_config and adding new fcoe_softc using fcoe_hostlist_add
are atomic, this is to ensure that a shared offload EM gets allocated
only once per eth device for its all lports.

Signed-off-by: Vasu Dev <vasu.dev@intel.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-08-22 17:52:09 -05:00
Vasu Dev
52ff878c91 [SCSI] fcoe, fnic, libfc: modifies current code paths to use EM anchor list
Modifies current code to use EM anchor list in EM allocation, EM free,
EM reset, exch allocation and exch lookup code paths.

 1. Modifies fc_exch_mgr_alloc to accept EM match function and then
    have allocated EM added to the lport using fc_exch_mgr_add API
    while also updating EM kref for newly added EM.

 2. Updates fc_exch_mgr_free API to accept only lport pointer instead
    EM and then have this API free all EMs of the lport from EM anchor
    list.

 3. Removes single lport pointer link from the EM, which was used in
    associating lport pointer in newly allocated exchange. Instead have
    lport pointer passed along new exchange allocation call path and
    then store passed lport pointer in newly allocated exchange, this
    will allow a single EM instance to be used across more than one
    lport and used in EM reset to reset only lport specific exchanges.

 4. Modifies fc_exch_mgr_reset to reset all EMs from the EM anchor list
    of the lport, adds additional exch lport pointer (ep->lp) check for
    shared EM case to reset exchange specific to a lport requested reset.

 5. Updates exch allocation API fc_exch_alloc to use EM anchor list and
    its anchor match func pointer. The fc_exch_alloc will walk the list
    of EMs until it finds a match, a match will be either null match
    func pointer or call to match function returning true value.

 6. Updates fc_exch_recv to accept incoming frame on local port using
    only lport pointer and frame pointer without specifying EM instance
    of incoming frame. Instead modified fc_exch_recv to locate EM for the
    incoming frame by matching xid of incoming frame against a EM xid range.
    This change was required to use EM list in libfc Rx path and after this
    change the lport fc_exch_mgr pointer emp is not needed anymore, so
    removed emp pointer.

 7. Updates fnic for removed lport emp pointer and above modified libfc APIs
    fc_exch_recv, fc_exch_mgr_alloc and fc_exch_mgr_free.

 8. Removes exch_get and exch_put from libfc_function_template as these
    are no longer needed with EM anchor list and its match function use.
    Also removes its default function fc_exch_get.

A defect this patch introduced regarding the libfc initialization order in
the fnic driver was fixed by Joe Eykholt <jeykholt@cisco.com>.

Signed-off-by: Vasu Dev <vasu.dev@intel.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-08-22 17:52:08 -05:00
Vasu Dev
96316099ac [SCSI] fcoe, libfc: adds exchange manager(EM) anchor list per lport and related APIs
Adds EM list using a anchor struct fc_exch_mgr_anchor, anchor is used
to allow same EM instance sharing across more than one lport on a eth
device, this implementation is per discussed design posted at
http://www.open-fcoe.org/pipermail/devel/2009-June/002566.html.

The shared EM is required for multiple lports on eth device when
using multiple VLANs or NPIV.

Adds fc_exch_mgr_add API to add a EM to the lport and fc_exch_mgr_del
API to delete previously added EM.

Also adds function fc_exch_mgr_destroy() to destroy allocated EM.
The kref is added to the EM to keep track of EM usage count, the EM is
destroyed when no longer in use upon kref reaching to zero.

The caller can specify match function to fc_exch_mgr_add, this
will be used in determining exchange allocation from its EM or not.

Moved calling of fcoe_em_config below fcoe_libfc_config calling,
so that list head lp->ema_list is initialized before configuring
EM.

Signed-off-by: Vasu Dev <vasu.dev@intel.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-08-22 17:52:07 -05:00
Joe Eykholt
f161fb7210 [SCSI] fcoe: stop delivery of received frames before doing lport_destroy()
To be more sure that no more input arrives at the local port as
it is being destroyed, clean the queues in the per-cpu receive
threads.

Signed-off-by: Joe Eykholt <jeykholt@cisco.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-08-22 17:52:04 -05:00
Yi Zou
2f718d64ec [SCSI] fcoe: Call dev_ethtool_get_settings() in fcoe_link_ok
No need to check phys_dev here, just call dev_ethtool_get_settings() directly
will take care of this.

Signed-off-by: Yi Zou <yi.zou@intel.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-08-22 17:52:03 -05:00
Yi Zou
5a84baeaf7 [SCSI] libfcoe: Set fip_flags according to fcf and lport's capability of SPMA support
When encap the els for FIP, set the fip_flags according to the FCF and lport's
capability of supporting SPMA or FPMA or both.

Signed-off-by: Yi Zou <yi.zou@intel.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-08-22 17:52:02 -05:00
Yi Zou
7a7f0c7f7a [SCSI] fcoe: Fix validation of mac address when checking for spma support
Fix this bug of validating the wrong mac address while checking for SAN MAC
address support from LLD as we should check ha->addr not ctlr.ctl_src_addr.

Signed-off-by: Yi Zou <yi.zou@intel.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-08-22 17:52:02 -05:00
Johannes Berg
66d6faec2f [SCSI] fcoe: convert to %pM
print_mac is being deprecated, and %pM makes for smaller
code anyway.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-08-22 17:51:56 -05:00
Robert Love
650bd12b9e libfcoe: Add runtime debugging with module param debug_logging
This patch adds a 'debug_logging' module parameter to
libfcoe.ko. It is an unsigned int that represents a bitmask of
available debug logging levels, each of which can be tuned at
runtime. Currently there are only two logging levels for this
module-

   bit
LSB 0 = libfcoe general logging
    1 = FIP logging

Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-21 11:07:06 -05:00
Robert Love
d5488eb9cd fcoe: Add runtime debug logging with module parameter debug_logging
This patch converts all FC_DBG statements to use new runtime tunable
debug macros. The fcoe.ko module now has a debug_logging module
parameter.

fcoe_debug_logging is an unsigned integer representing a bitmask of all
available logging levels. Currently only two logging levels are
supported-

   bit
LSB 0 = general fcoe logging
    1 = netdevice related logging

This patch also attempts to clean up some debug statement formatting
so it's more readable.

Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-21 11:07:02 -05:00
David S. Miller
9cbc1cb8cd Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6
Conflicts:
	Documentation/feature-removal-schedule.txt
	drivers/scsi/fcoe/fcoe.c
	net/core/drop_monitor.c
	net/core/net-traces.c
2009-06-15 03:02:23 -07:00
Vasu Dev
4e57e1cbbd [SCSI] fcoe: removes reserving memory for vlan_ethdr on tx path
This is not required as VLAN header is added by device
interface driver, this was causing bad FC_CRC in FCoE pkts when
using VLAN interface.

Signed-off-by: Vasu Dev <vasu.dev@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-08 13:29:16 -05:00
Vasu Dev
1047f22108 [SCSI] fcoe: removes fcoe_watchdog
Removes periodic fcoe_watchdog timer used across all fcoe interface
maintained in fcoe_hostlist instead added new fcoe_queue_timer
per fcoe interface.

Added timer is armed only when some pending skb need to be flushed
as oppose to periodic 1 second fcoe_watchdog, since now
fcoe_queue_timer is used on demand thus set this to 2 jiffies.

Now fcoe_queue_timer is much simple than fcoe_watchdog using lock to
process all fcoe interface from fcoe_hostlist.

I noticed +ve performance result with using 2 jiffies timer as
this helps flushing fcoe_pending_queue quickly.

Signed-off-by: Vasu Dev <vasu.dev@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-08 13:29:14 -05:00
Vasu Dev
4bb6b51533 [SCSI] fcoe: reduces lock cost when adding a new skb to fcoe_pending_queue
Currently fcoe_pending_queue.lock held twice for every new skb
adding to this queue when already least one pkt is pending in this
queue and that is not uncommon once skb pkts starts getting queued
here upon fcoe_start_io => dev_queue_xmit failure.

This patch moves most fcoe_pending_queue logic to fcoe_check_wait_queue
function, this new logic grabs fcoe_pending_queue.lock only once to
add a new skb instead twice as used to be.

I think after this patch call flow around fcoe_check_wait_queue
calling in fcoe_xmit is bit simplified with modified
fcoe_check_wait_queue function taking care of adding and
removing pending skb in one function.

Signed-off-by: Vasu Dev <vasu.dev@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-08 13:29:13 -05:00
Chris Leech
0f4915398a [SCSI] fcoe: use ETH_P_FIP for skb->protocol of FIP frames
FIP frames should leave the fcoe layer with skb->protocol set to
ETH_P_FIP, not ETH_P_802_3.

Signed-off-by: Chris Leech <christopher.leech@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-08 13:29:08 -05:00
Joe Eykholt
5f48f70ece [SCSI] libfcoe: fip: fix non-FIP-mode FLOGI state after reset.
When a reset is sent using fcoeadm on a non-FIP mode NIC,
there's no link flap, so the fcoe_ctlr stays in non-FIP mode.

In that case, FIP wasn't setting the flogi_oxid or map_dest flag,
causing the FLOGI to be sent with the both wrong source MAC and
the wrong destination MAC address, causing it to fail.

This leads to a non-functioning HBA until a link flap or
instance delete/create.

Signed-off-by: Joe Eykholt <jeykholt@cisco.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-08 13:29:07 -05:00
Jiri Pirko
ccffad25b5 net: convert unicast addr list
This patch converts unicast address list to standard list_head using
previously introduced struct netdev_hw_addr. It also relaxes the
locking. Original spinlock (still used for multicast addresses) is not
needed and is no longer used for a protection of this list. All
reading and writing takes place under rtnl (with no changes).

I also removed a possibility to specify the length of the address
while adding or deleting unicast address. It's always dev->addr_len.

The convertion touched especially e1000 and ixgbe codes when the
change is not so trivial.

Signed-off-by: Jiri Pirko <jpirko@redhat.com>

 drivers/net/bnx2.c               |   13 +--
 drivers/net/e1000/e1000_main.c   |   24 +++--
 drivers/net/ixgbe/ixgbe_common.c |   14 ++--
 drivers/net/ixgbe/ixgbe_common.h |    4 +-
 drivers/net/ixgbe/ixgbe_main.c   |    6 +-
 drivers/net/ixgbe/ixgbe_type.h   |    4 +-
 drivers/net/macvlan.c            |   11 +-
 drivers/net/mv643xx_eth.c        |   11 +-
 drivers/net/niu.c                |    7 +-
 drivers/net/virtio_net.c         |    7 +-
 drivers/s390/net/qeth_l2_main.c  |    6 +-
 drivers/scsi/fcoe/fcoe.c         |   16 ++--
 include/linux/netdevice.h        |   18 ++--
 net/8021q/vlan.c                 |    4 +-
 net/8021q/vlan_dev.c             |   10 +-
 net/core/dev.c                   |  195 +++++++++++++++++++++++++++-----------
 net/dsa/slave.c                  |   10 +-
 net/packet/af_packet.c           |    4 +-
 18 files changed, 227 insertions(+), 137 deletions(-)
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-29 22:12:32 -07:00
Abhijeet Joglekar
a366695592 [SCSI] libfc,fcoe,fnic: Separate rport and lport max retry counts
This allows fnic to configure number of retries for lport and rport
separately.

Signed-off-by: Abhijeet Joglekar <abjoglek@cisco.com>
Acked-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-05-23 15:44:18 -05:00
Randy Dunlap
b0d428adeb [SCSI] fcoe, libfc: fix function declarations to be ANSI-compliant
Fix function declarations:

drivers/scsi/fcoe/fcoe.c:1356:28: warning: non-ANSI function declaration of function 'fcoe_dev_setup'
drivers/scsi/libfc/fc_rport.c:1293:20: warning: non-ANSI function declaration of function 'fc_setup_rport'
drivers/scsi/libfc/fc_rport.c:1302:23: warning: non-ANSI function declaration of function 'fc_destroy_rport'

[jejb: fixed wrong doc in comment noticed during inspection]
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-05-20 17:21:15 -05:00
David S. Miller
bb803cfbec Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
	drivers/scsi/fcoe/fcoe.c
2009-05-18 21:08:20 -07:00
Vasu Dev
184dd3459b fcoe: adds spma mode support
If we can find a type NETDEV_HW_ADDR_T_SAN mac address from the
corresponding netdev for a fcoe interface then sets up added the
fc->ctlr.spma flag and stores spma mode address in ctl_src_addr.

In case the spma flag is set then:-

 1. Adds spma mode MAC address in ctl_src_addr as secondary
    MAC address, the FLOGI for FIP and pre-FIP will go out
    using this address.
 2. Cleans up stored spma MAC address in ctl_src_addr in
    fcoe_netdev_cleanup.
 3. Sets up spma bit in fip_flags for FIP solicitations along
    with exiting FPMA bit setting.
 4. Initialize the FLOGI FIP MAC descriptor to stored spma
    MAC address in ctl_src_addr. This is used as proposed
    FCoE MAC address from initiator along with both SPMA
    and FPMA bit set in FIP solicitation, in response the
    switch may grant any FPMA or SPMA mode MAC address to
    initiator.

Removes FIP descriptor type checking against ELS type
ELS_FLOGI in fcoe_ctlr_encaps to update a FIP MAC descriptor,
instead now checks against FIP_DT_FLOGI.

I've tested this with available FPMA-only FCoE switch but
since data_src_addr is updated using same old code for
both FPMA and SPMA modes with FIP or pre-FIP links, so added
SPMA mode will work with SPMA-only switch also provided that
switch grants a valid MAC address.

Signed-off-by: Vasu Dev <vasu.dev@intel.com>
Signed-off-by: Yi Zou <yi.zou@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-17 21:04:08 -07:00
Vasu Dev
ab6b85c1d7 fcoe: consolidates netdev related config and cleanup for spma mode
Currently fcoe_netdev_config adds netdev pkt handler for fcoe pkts,
fcoe_if_create adds netdev pkt handler for fip packets, a secondary
MAC address is added by fcoe_netdev_config and then later cleanup
for these netdev related config/adds is done only during
fcoe_if_destroy and no cleanup done on error during fcoe interface
creation after above netdev config calling in fcoe_if_create.

So this patch adds single func for above mentioned cleanup the
fcoe_netdev_cleanup and then calls this func on either fcoe interface
destroy or exiting from fcoe_if_create due to an error after fcoe/fip
related above netdev config is done.

Moved netdev pkt handler addition code blocks for fip pkts close to
similar code block for foce pkt in fcoe_netdev_config, so that added
fcoe_netdev_cleanup could be called on error from fcoe_netdev_config
to undo these both additions for fcoe/fip pkt handlers. This move
required reference to fcoe_fip_recv in fcoe_netdev_config, so moved
fip related functions fcoe_fip_recv, fcoe_fip_send and
fcoe_update_src_mac above fcoe_netdev_config.

This consolidation will enable spma mode support in next patch to
easily add or delete spma mode mac address beside fixing current
no cleanup issue during error.

Signed-off-by: Vasu Dev <vasu.dev@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-17 21:04:08 -07:00
Joe Eykholt
6401bdcad5 [SCSI] fcoe: fip: add multicast filter to receive FIP advertisements.
The FCoE forwarder (FCF) would be selected, but then would soon time
out after three advertisements were missed.  This would be 24 seconds
by default, or 3 times the keep-alive interval configured on the switch.

The cause was that the multicast address for all FIP E-nodes
was never added.

Signed-off-by: Joe Eykholt <jeykholt@cisco.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-04-27 10:19:35 -05:00
Chris Leech
dd3fd72e69 [SCSI] fcoe: fix spelling typos and bad comments
Signed-off-by: Chris Leech <christopher.leech@intel.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-04-27 10:19:28 -05:00