This improves the nocow lock table so that hash table entries have
multiple locks, and locks specify which bucket they're for - i.e. we can
now resolve hash collisions.
This is important because the allocator has to skip buckets that are
locked in the nocow lock table, and previously hash collisions would
cause it to spuriously skip unlocked buckets.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
To improve mount times, add a btree for just bucket gens, 256 of them
per key: this means we'll have to scan drastically less metadata at
startup.
This adds
- trigger for keeping it in sync with the all btree
- initialization code, for filesystems from previous versions
- new path for reading bucket gens
- new fsck code
And a new on disk format version.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This patch adds backpointers: we now have a reverse index from device
and offset on that device (specifically, offset within a bucket) back to
btree nodes and (non cached) data extents.
The first 40 backpointers within a bucket are stored in the alloc key;
after that backpointers spill over to the next backpointers btree. This
is to help avoid performance regressions from additional btree updates
on large streaming workloads.
This patch adds all the code for creating, checking and repairing
backpointers. The next patch in the series is going to use backpointers
for copygc - finally getting rid of the need to scan all extents to do
copygc.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This separates out the slowpath into a separate function, and inlines
bch2_alloc_v4_mut into bch2_trans_start_alloc_update(), the main place
it's called.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Like bch2_copygc_wait_amount, should_invalidate_buckets() needs to try
to ensure that there are always more buckets free than the largest
reserve.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
For backpointers, we'll need the full key location - that means btree_id
and btree level. This patch plumbs it through.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Previously, we were missing accounting for buckets in need_gc_gens and
need_discard states. This matters because buckets in those states need
other btree operations done before they can be used, so they can't be
conuted when checking current number of free buckets against the
allocation watermark.
Also, we weren't directly counting free buckets at all. Now, data type 0
== BCH_DATA_free, and free buckets are counted; this means we can get
rid of the separate (poorly defined) count of unavailable buckets.
This is a new on disk format version, with upgrade and fsck required for
the accounting changes.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
This adds a new parameter to .key_invalid() methods for whether the key
is being read or written; the idea being that methods can do more
aggressive checks when a key is newly created and being written, when we
wouldn't want to delete the key because of those checks.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
- Move checks for whether the device & bucket are valid from the
.key_invalid method to bch2_check_alloc_key(). This is because
.key_invalid() is called on keys that may no longer exist (post
journal replay), which is a problem when removing/resizing devices.
- We weren't checking the need_discard btree to ensure that every set
bucket has a corresponding alloc key. This refactors the code for
checking the freespace btree, so that it now checks both.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
All code using the in-memory bucket array, excluding GC, has now been
converted to use the alloc btree directly - so we can finally delete it.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
In the old allocator code, preparing an existing empty bucket was part
of the same code path that invalidated buckets containing cached data.
In the new allocator code this is no longer the case: the main allocator
path finds empty buckets (via the new freespace btree), and can't
allocate buckets that contain cached data.
We now need a separate code path to invalidate buckets containing cached
data when we're low on empty buckets, which this patch implements. When
the number of free buckets decreases that triggers the new invalidate
path to run, which uses the LRU btree to pick cached data buckets to
invalidate until we're above our watermark.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
In the old allocator code, buckets would be discarded just prior to
being used - this made sense in bcache where we were discarding buckets
just after invalidating the cached data they contain, but in a
filesystem where we typically have more free space we want to be
discarding buckets when they become empty.
This patch implements the new behaviour - it checks the need_discard
btree for buckets awaiting discards, and then clears the appropriate
bit in the alloc btree, which moves the buckets to the freespace btree.
Additionally, discards are now enabled by default.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Now that we have new persistent data structures for the allocator, this
patch converts the allocator to use them.
Now, foreground bucket allocation uses the freespace btree to find
buckets to allocate, instead of popping buckets off the freelist.
The background allocator threads are no longer needed and are deleted,
as well as the allocator freelists. Now we only need background tasks
for invalidating buckets containing cached data (when we are low on
empty buckets), and for issuing discards.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This adds two new btrees for the upcoming allocator rewrite: an extents
btree of free buckets, and a btree for buckets awaiting discards.
We also add a new trigger for alloc keys to keep the new btrees up to
date, and a compatibility path to initialize them on existing
filesystems.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This introduces a new alloc key which doesn't use varints. Soon we'll be
adding backpointers and storing them in alloc keys, which means our
pack/unpack workflow for alloc keys won't really work - we'll need to be
mutating alloc keys in place.
Instead of bch2_alloc_unpack(), we now have bch2_alloc_to_v4() that
converts older types of alloc keys to v4 if needed.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This replaces the switch statements in bch2_mark_key(),
bch2_trans_mark_key() with new bkey methods - prep work for the next
patch, which fixes BTREE_TRIGGER_WANTS_OLD_AND_NEW.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
This changes the btree_gc code to only use the second bucket array, the
one dedicated to GC. On completion, it compares what's in its in memory
bucket array to the allocation information in the btree and writes it
directly, instead of updating the main in-memory bucket array and
writing that.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Prep work for adding a hash table of open buckets - instead of embedding
a bch_extent_ptr, we need to refer to the bucket directly so that we're
not calling sector_to_bucket() in the hash table lookup code, which has
an expensive divide.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
This moves some common code into alloc_mem_to_key(), which translates
from the in-memory format for a bucket to the btree key format.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
This adds a new helper that much like the one we have for inode updates,
that allocates the packed alloc key, packs it and calls
bch2_trans_update.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
When we added the stripe and stripe_redundancy fields to alloc keys, we
neglected to add them to the functions that convert back and forth with
the in-memory types.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Add fields to inode & alloc keys that record the journal sequence number
when they were most recently modified.
For alloc keys, this is needed to know what journal sequence number we
have to flush before the bucket can be reused. Currently this is tracked
in memory, but we'll be getting rid of the in memory bucket array.
For inodes, this is needed for fsync when the inode has been evicted
from the vfs cache. Currently we use a bloom filter per outstanding
journal buf - but that mechanism has been broken since we added the
ability to not issue a flush/fua for every journal write.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
This is to help debug a rare shutdown deadlock in the allocator code -
the btree code is leaking open_buckets.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
This fixes a regression from the patch
bcachefs: Fix copygc dying on startup
In general only the allocator thread itself should be updating
ca->allocator_state, the thread waking up the allocator setting it is an
ugly hack only needed to avoid racing with the copygc threads when we're
first starting up.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This introduces a new version of KEY_TYPE_alloc, which uses the new
varint encoding introduced for inodes. This means we'll eventually be
able to support much larger bucket sizes (for SMR devices), and the
read/write time fields are expanded to 64 bits - which will be used in
the next patch to get rid of the periodic rescaling of those fields.
Also, for buckets that are members of erasure coded stripes, this adds
persistent fields for the index of the stripe they're members of and the
stripe redundancy. This is part of work to get rid of having to scan and
read into memory the alloc and stripes btrees at mount time.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
More work towards getting rid of the in memory struct bucket: this path
adds code for marking superblock and journal buckets via the btree, and
uses it in the device add and journal resize paths.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
With the btree key cache code, we don't need to update the alloc btree
lazily - and this will mean we can remove the bch2_alloc_write() call in
the shutdown path.
Future work: we really need to expend the bucket IO clocks from 16 to 64
bits, so that we don't have to rescale them.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
It's not used much anymore, the module paramter interface is better.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
The allocator usually doesn't increment bucket gens right away on
buckets that it's about to hand out (for reasons that need to be
documented), instead deferring that to whatever extent update first
references that bucket.
But stripe pointers reference buckets without changing bucket sector
counts, meaning we could end up with a pointer in a stripe with a gen
newer than the bucket it points to.
Fix this by adding a transactional trigger for KEY_TYPE_stripe that just
writes out the keys in the alloc btree for the buckets it points to.
Also - consolidate the code that checks pointer validity.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Now that we've got transactional alloc info updates (and have for
awhile), we don't need to write it out on shutdown, and we don't need to
write it out on startup except when GC found errors - this is a big
improvement to mount/unmount performance.
This patch also fixes a few bugs where we weren't writing out alloc
info (on new filesystems, and new devices) and should have been.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
The copygc threads errors out and makes the filesystem go RO if it ever
tries to run and discovers it has no reserve allocated - which is a
problem if it races with the allocator thread and its reserve hasn't
been filled yet.
The allocator thread doesn't start filling the copygc reserve until
after BCH_FS_STARTED has been set, so make sure to wake up the allocator
threads after setting that and before starting copygc.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
It's not needed anymore since we can now write to buckets before
updating the alloc btree.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Major simplification - gets rid of the need for marking buckets as
dirty, instead we write buckets if the in memory mark is different from
what's in the btree.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This fixes a bug in the journal replay -> extent_replay_key ->
split_compressed path, when we do an update that changes alloc info but
the alloc info in the btree isn't up to date yet.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
- Does not persist alloc info for stripes yet
- Also does not yet include filesystem block/sector counts yet, from
struct fs_usage
- Not made use of just yet
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
this lets us get rid of a lot of extra switch statements - in a lot of
places we dispatch on the btree node type, and then the key type, so
this is a nice cleanup across a lot of code.
Also improve the on disk format versioning stuff.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
