This improves the nocow lock table so that hash table entries have
multiple locks, and locks specify which bucket they're for - i.e. we can
now resolve hash collisions.
This is important because the allocator has to skip buckets that are
locked in the nocow lock table, and previously hash collisions would
cause it to spuriously skip unlocked buckets.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This adds a debug mode where we split up the c->writes refcount into
distinct refcounts for every codepath that takes a reference, and adds
sysfs code to print the value of each ref.
This will make it easier to debug shutdown hangs due to refcount leaks.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This replaces sysfs btree_avg_write_size with btree_write_stats, which
now breaks out statistics by the source of the btree write.
Btree writes that are too small are a source of inefficiency, and
excessive btree resort overhead - this will let us see what's causing
them.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Sometimes the user may need to change durability after formatting to
match current hardware setup, this option provides a quick and flexible
alternative to removing then adding the device.
It is HIGHLY ADVISED TO RUN REREPLICATE after changing this value so the
system doesn't remain degraded.
Signed-off-by: Daniel Hill <daniel@gluo.nz>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
The next patch is going to be adding private error codes for all the
places we return -ENOSPC.
Additionally, this patch updates return paths at all module boundaries
to call bch2_err_class(), to return the standard error code.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Spotted a lockup once that appeared to be a lost wakeup. Adding a manual
trigger for lock wakeups will make it easy to tell if that's what it is
next time it occurs.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Also, do some reorganizing/renaming, convert atomic counters in bch_fs
to persistent counters, and add a few missing counters.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
If we're trying to get a ref and the refcount has been killed, it means
we're doing an emergency shutdown - we always want tryget_live().
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
When inserting a key type that's not valid for a given btree, we should
print out which btree we were inserting into.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Like bch2_do_discards(), we should check if this needs to be done when
going rw.
Also, add some sysfs code for debugging bucket invalidation.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
This converts bcachefs to the modern printbuf interface/implementation,
synced with the version to be submitted upstream.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This adds a new superblock field for persisting counters
and adds a sysfs interface in counters/ exposing these counters.
The superblock field is ignored by older versions letting us avoid
an on disk version bump.
Each sysfs file outputs a counter that tracks since filesystem
creation and a counter for the current mount session.
Signed-off-by: Daniel Hill <daniel@gluo.nz>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Previously, we were missing accounting for buckets in need_gc_gens and
need_discard states. This matters because buckets in those states need
other btree operations done before they can be used, so they can't be
conuted when checking current number of free buckets against the
allocation watermark.
Also, we weren't directly counting free buckets at all. Now, data type 0
== BCH_DATA_free, and free buckets are counted; this means we can get
rid of the separate (poorly defined) count of unavailable buckets.
This is a new on disk format version, with upgrade and fsck required for
the accounting changes.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
We're currently debugging an issue with discards not getting run; this
patch adds a manual trigger so we can then watch the tracepoint while it
runs.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Now that we have new persistent data structures for the allocator, this
patch converts the allocator to use them.
Now, foreground bucket allocation uses the freespace btree to find
buckets to allocate, instead of popping buckets off the freelist.
The background allocator threads are no longer needed and are deleted,
as well as the allocator freelists. Now we only need background tasks
for invalidating buckets containing cached data (when we are low on
empty buckets), and for issuing discards.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
In the write path, after the write to the block device(s) complete we
have to punt to process context to do the btree update.
Instead of using the work item embedded in op->cl, this patch switches
to a per write-point work item. This helps with two different issues:
- lock contention: btree updates to the same writepoint will (usually)
be updating the same alloc keys
- context switch overhead: when we're bottlenecked on btree updates,
having a thread (running out of a work item) checking the write point
for completed ops is cheaper than queueing up a new work item and
waking up a kworker.
In an arbitrary benchmark, 4k random writes with fio running inside a
VM, this patch resulted in a 10% improvement in total iops.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This moves validation of superblock options to bch2_sb_validate(), so
they'll be checked in the write path as well.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Options no longer have to be manually added to bch2_sb_to_text() - it
now uses the master list of options in opts.h. Also, improve some of the
formatting by converting it to tabstops.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
In sysfs, files can only output at most PAGE_SIZE. This is a problem for
debug info that needs to list an arbitrary number of times, and because
of this limit some of our debug info has been terser and harder to read
than we'd like.
This patch moves info about journal pins and cached btree nodes to
debugfs, and greatly expands and improves the output we return.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
This patch changes printbufs dynamically allocate and reallocate a
buffer as needed. Stack usage has become a bit of a problem, and a major
cause of that has been static size string buffers on the stack.
The most involved part of this refactoring is that printbufs must now be
exited with printbuf_exit().
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This patch improves the superblock .to_text() methods and adds methods
for all types that were missing them. It also improves printbufs by
allowing them to specfiy what units we want to be printing in, and adds
new wrapper methods for unifying our kernel and userspace environments.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Like the previous patches, this converts bch2_gc_gens() to use the alloc
btree directly, and private arrays of generation numbers for its own
recalculation of oldest_gen.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
- BTREE_ITER_ALL_SNAPSHOTS flag is required here
- change it to also walk the reflink btree
- change it to accumulate stats for all pointers in an extent
- change it to account for incompressible data
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Prep work for adding a hash table of open buckets - instead of embedding
a bch_extent_ptr, we need to refer to the bucket directly so that we're
not calling sector_to_bucket() in the hash table lookup code, which has
an expensive divide.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
This patch ensures that the journal entry written gets written as flush
entry, which is important for the shutdown path - the last entry written
needs to be a flush entry.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
This adds flags for options that must be a power of two (block size and
btree node size), and options that are stored in the superblock as a
power of two (encoded extent max).
Also: options are now stored in memory in the same units they're
displayed in (bytes): we now convert when getting and setting from the
superblock.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
We've got three types of options now - filesystem, device and inode, and
a given option may belong to more than one of those types.
This patch changes the options to specify explicitly when they're a
filesystem option - in the future we'll probably be adding more device
options.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
This converts journal_write_delay, journal_flush_disabled, and
journal_reclaim_delay to normal filesystems options, and also adds them
to the superblock.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
We're getting rid of code that uses the in memory bucket array - and we
now have better mechanisms for viewing most of what the bucket quantiles
code gave us (especially internal fragmentation).
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Now that peek_node()/next_node() are converted to return errors
directly, we don't need bch2_trans_exit() to return errors - it's
cleaner this way and wasn't used much anymore.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
This splits btree_iter into two components: btree_iter is now the
externally visible componont, and it points to a btree_path which is now
reference counted.
This means we no longer have to clone iterators up front if they might
be mutated - btree_path can be shared by multiple iterators, and cloned
if an iterator would mutate a shared btree_path. This will help us use
iterators more efficiently, as well as slimming down the main long lived
state in btree_trans, and significantly cleans up the logic for iterator
lifetimes.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This adds progress stats to sysfs for copygc, rebalance, recovery, and the
cmd_job ioctls.
Signed-off-by: Brett Holman <bholman.devel@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This is to help debug a rare shutdown deadlock in the allocator code -
the btree code is leaking open_buckets.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
We have foreground btree node merging now, and any future btree node
merging improvements are going to be based off of that code.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Useful number for performance tuning.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This patch standardizes all the enums that have associated string tables
(probably more enums should have string tables).
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We have a separate mechanism for ratelimiting copygc now - the pd
controller has only been causing problems.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>