Here is the large set of driver core changes for 6.4-rc1.
Once again, a busy development cycle, with lots of changes happening in
the driver core in the quest to be able to move "struct bus" and "struct
class" into read-only memory, a task now complete with these changes.
This will make the future rust interactions with the driver core more
"provably correct" as well as providing more obvious lifetime rules for
all busses and classes in the kernel.
The changes required for this did touch many individual classes and
busses as many callbacks were changed to take const * parameters
instead. All of these changes have been submitted to the various
subsystem maintainers, giving them plenty of time to review, and most of
them actually did so.
Other than those changes, included in here are a small set of other
things:
- kobject logging improvements
- cacheinfo improvements and updates
- obligatory fw_devlink updates and fixes
- documentation updates
- device property cleanups and const * changes
- firwmare loader dependency fixes.
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZEp7Sw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykitQCfamUHpxGcKOAGuLXMotXNakTEsxgAoIquENm5
LEGadNS38k5fs+73UaxV
=7K4B
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the large set of driver core changes for 6.4-rc1.
Once again, a busy development cycle, with lots of changes happening
in the driver core in the quest to be able to move "struct bus" and
"struct class" into read-only memory, a task now complete with these
changes.
This will make the future rust interactions with the driver core more
"provably correct" as well as providing more obvious lifetime rules
for all busses and classes in the kernel.
The changes required for this did touch many individual classes and
busses as many callbacks were changed to take const * parameters
instead. All of these changes have been submitted to the various
subsystem maintainers, giving them plenty of time to review, and most
of them actually did so.
Other than those changes, included in here are a small set of other
things:
- kobject logging improvements
- cacheinfo improvements and updates
- obligatory fw_devlink updates and fixes
- documentation updates
- device property cleanups and const * changes
- firwmare loader dependency fixes.
All of these have been in linux-next for a while with no reported
problems"
* tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (120 commits)
device property: make device_property functions take const device *
driver core: update comments in device_rename()
driver core: Don't require dynamic_debug for initcall_debug probe timing
firmware_loader: rework crypto dependencies
firmware_loader: Strip off \n from customized path
zram: fix up permission for the hot_add sysfs file
cacheinfo: Add use_arch[|_cache]_info field/function
arch_topology: Remove early cacheinfo error message if -ENOENT
cacheinfo: Check cache properties are present in DT
cacheinfo: Check sib_leaf in cache_leaves_are_shared()
cacheinfo: Allow early level detection when DT/ACPI info is missing/broken
cacheinfo: Add arm64 early level initializer implementation
cacheinfo: Add arch specific early level initializer
tty: make tty_class a static const structure
driver core: class: remove struct class_interface * from callbacks
driver core: class: mark the struct class in struct class_interface constant
driver core: class: make class_register() take a const *
driver core: class: mark class_release() as taking a const *
driver core: remove incorrect comment for device_create*
MIPS: vpe-cmp: remove module owner pointer from struct class usage.
...
After upgrading build guests to v6.3, rpm started segfaulting for
specific packages, which was bisected to commit 0503ea8f5b ("mm/mmap:
remove __vma_adjust()"). rpm is doing many mremap() operations with file
mappings of its db. The problem is that in vma_merge() case 3 (we merge
with the next vma, expanding it downwards) vm_pgoff is not adjusted as
it should when vm_start changes. As a result the rpm process most likely
sees data from the wrong offset of the file. Fix the vm_pgoff
calculation.
For case 8 this is a non-functional change as the resulting vm_pgoff is
the same.
Reported-and-bisected-by: Jiri Slaby <jirislaby@kernel.org>
Reported-and-tested-by: Fabian Vogt <fvogt@suse.com>
Link: https://bugzilla.suse.com/show_bug.cgi?id=1210903
Fixes: 0503ea8f5b ("mm/mmap: remove __vma_adjust()")
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Core
----
- Introduce a config option to tweak MAX_SKB_FRAGS. Increasing the
default value allows for better BIG TCP performances.
- Reduce compound page head access for zero-copy data transfers.
- RPS/RFS improvements, avoiding unneeded NET_RX_SOFTIRQ when possible.
- Threaded NAPI improvements, adding defer skb free support and unneeded
softirq avoidance.
- Address dst_entry reference count scalability issues, via false
sharing avoidance and optimize refcount tracking.
- Add lockless accesses annotation to sk_err[_soft].
- Optimize again the skb struct layout.
- Extends the skb drop reasons to make it usable by multiple
subsystems.
- Better const qualifier awareness for socket casts.
BPF
---
- Add skb and XDP typed dynptrs which allow BPF programs for more
ergonomic and less brittle iteration through data and variable-sized
accesses.
- Add a new BPF netfilter program type and minimal support to hook
BPF programs to netfilter hooks such as prerouting or forward.
- Add more precise memory usage reporting for all BPF map types.
- Adds support for using {FOU,GUE} encap with an ipip device operating
in collect_md mode and add a set of BPF kfuncs for controlling encap
params.
- Allow BPF programs to detect at load time whether a particular kfunc
exists or not, and also add support for this in light skeleton.
- Bigger batch of BPF verifier improvements to prepare for upcoming BPF
open-coded iterators allowing for less restrictive looping capabilities.
- Rework RCU enforcement in the verifier, add kptr_rcu and enforce BPF
programs to NULL-check before passing such pointers into kfunc.
- Add support for kptrs in percpu hashmaps, percpu LRU hashmaps and in
local storage maps.
- Enable RCU semantics for task BPF kptrs and allow referenced kptr
tasks to be stored in BPF maps.
- Add support for refcounted local kptrs to the verifier for allowing
shared ownership, useful for adding a node to both the BPF list and
rbtree.
- Add BPF verifier support for ST instructions in convert_ctx_access()
which will help new -mcpu=v4 clang flag to start emitting them.
- Add ARM32 USDT support to libbpf.
- Improve bpftool's visual program dump which produces the control
flow graph in a DOT format by adding C source inline annotations.
Protocols
---------
- IPv4: Allow adding to IPv4 address a 'protocol' tag. Such value
indicates the provenance of the IP address.
- IPv6: optimize route lookup, dropping unneeded R/W lock acquisition.
- Add the handshake upcall mechanism, allowing the user-space
to implement generic TLS handshake on kernel's behalf.
- Bridge: support per-{Port, VLAN} neighbor suppression, increasing
resilience to nodes failures.
- SCTP: add support for Fair Capacity and Weighted Fair Queueing
schedulers.
- MPTCP: delay first subflow allocation up to its first usage. This
will allow for later better LSM interaction.
- xfrm: Remove inner/outer modes from input/output path. These are
not needed anymore.
- WiFi:
- reduced neighbor report (RNR) handling for AP mode
- HW timestamping support
- support for randomized auth/deauth TA for PASN privacy
- per-link debugfs for multi-link
- TC offload support for mac80211 drivers
- mac80211 mesh fast-xmit and fast-rx support
- enable Wi-Fi 7 (EHT) mesh support
Netfilter
---------
- Add nf_tables 'brouting' support, to force a packet to be routed
instead of being bridged.
- Update bridge netfilter and ovs conntrack helpers to handle
IPv6 Jumbo packets properly, i.e. fetch the packet length
from hop-by-hop extension header. This is needed for BIT TCP
support.
- The iptables 32bit compat interface isn't compiled in by default
anymore.
- Move ip(6)tables builtin icmp matches to the udptcp one.
This has the advantage that icmp/icmpv6 match doesn't load the
iptables/ip6tables modules anymore when iptables-nft is used.
- Extended netlink error report for netdevice in flowtables and
netdev/chains. Allow for incrementally add/delete devices to netdev
basechain. Allow to create netdev chain without device.
Driver API
----------
- Remove redundant Device Control Error Reporting Enable, as PCI core
has already error reporting enabled at enumeration time.
- Move Multicast DB netlink handlers to core, allowing devices other
then bridge to use them.
- Allow the page_pool to directly recycle the pages from safely
localized NAPI.
- Implement lockless TX queue stop/wake combo macros, allowing for
further code de-duplication and sanitization.
- Add YNL support for user headers and struct attrs.
- Add partial YNL specification for devlink.
- Add partial YNL specification for ethtool.
- Add tc-mqprio and tc-taprio support for preemptible traffic classes.
- Add tx push buf len param to ethtool, specifies the maximum number
of bytes of a transmitted packet a driver can push directly to the
underlying device.
- Add basic LED support for switch/phy.
- Add NAPI documentation, stop relaying on external links.
- Convert dsa_master_ioctl() to netdev notifier. This is a preparatory
work to make the hardware timestamping layer selectable by user
space.
- Add transceiver support and improve the error messages for CAN-FD
controllers.
New hardware / drivers
----------------------
- Ethernet:
- AMD/Pensando core device support
- MediaTek MT7981 SoC
- MediaTek MT7988 SoC
- Broadcom BCM53134 embedded switch
- Texas Instruments CPSW9G ethernet switch
- Qualcomm EMAC3 DWMAC ethernet
- StarFive JH7110 SoC
- NXP CBTX ethernet PHY
- WiFi:
- Apple M1 Pro/Max devices
- RealTek rtl8710bu/rtl8188gu
- RealTek rtl8822bs, rtl8822cs and rtl8821cs SDIO chipset
- Bluetooth:
- Realtek RTL8821CS, RTL8851B, RTL8852BS
- Mediatek MT7663, MT7922
- NXP w8997
- Actions Semi ATS2851
- QTI WCN6855
- Marvell 88W8997
- Can:
- STMicroelectronics bxcan stm32f429
Drivers
-------
- Ethernet NICs:
- Intel (1G, icg):
- add tracking and reporting of QBV config errors.
- add support for configuring max SDU for each Tx queue.
- Intel (100G, ice):
- refactor mailbox overflow detection to support Scalable IOV
- GNSS interface optimization
- Intel (i40e):
- support XDP multi-buffer
- nVidia/Mellanox:
- add the support for linux bridge multicast offload
- enable TC offload for egress and engress MACVLAN over bond
- add support for VxLAN GBP encap/decap flows offload
- extend packet offload to fully support libreswan
- support tunnel mode in mlx5 IPsec packet offload
- extend XDP multi-buffer support
- support MACsec VLAN offload
- add support for dynamic msix vectors allocation
- drop RX page_cache and fully use page_pool
- implement thermal zone to report NIC temperature
- Netronome/Corigine:
- add support for multi-zone conntrack offload
- Solarflare/Xilinx:
- support offloading TC VLAN push/pop actions to the MAE
- support TC decap rules
- support unicast PTP
- Other NICs:
- Broadcom (bnxt): enforce software based freq adjustments only
on shared PHC NIC
- RealTek (r8169): refactor to addess ASPM issues during NAPI poll.
- Micrel (lan8841): add support for PTP_PF_PEROUT
- Cadence (macb): enable PTP unicast
- Engleder (tsnep): add XDP socket zero-copy support
- virtio-net: implement exact header length guest feature
- veth: add page_pool support for page recycling
- vxlan: add MDB data path support
- gve: add XDP support for GQI-QPL format
- geneve: accept every ethertype
- macvlan: allow some packets to bypass broadcast queue
- mana: add support for jumbo frame
- Ethernet high-speed switches:
- Microchip (sparx5): Add support for TC flower templates.
- Ethernet embedded switches:
- Broadcom (b54):
- configure 6318 and 63268 RGMII ports
- Marvell (mv88e6xxx):
- faster C45 bus scan
- Microchip:
- lan966x:
- add support for IS1 VCAP
- better TX/RX from/to CPU performances
- ksz9477: add ETS Qdisc support
- ksz8: enhance static MAC table operations and error handling
- sama7g5: add PTP capability
- NXP (ocelot):
- add support for external ports
- add support for preemptible traffic classes
- Texas Instruments:
- add CPSWxG SGMII support for J7200 and J721E
- Intel WiFi (iwlwifi):
- preparation for Wi-Fi 7 EHT and multi-link support
- EHT (Wi-Fi 7) sniffer support
- hardware timestamping support for some devices/firwmares
- TX beacon protection on newer hardware
- Qualcomm 802.11ax WiFi (ath11k):
- MU-MIMO parameters support
- ack signal support for management packets
- RealTek WiFi (rtw88):
- SDIO bus support
- better support for some SDIO devices
(e.g. MAC address from efuse)
- RealTek WiFi (rtw89):
- HW scan support for 8852b
- better support for 6 GHz scanning
- support for various newer firmware APIs
- framework firmware backwards compatibility
- MediaTek WiFi (mt76):
- P2P support
- mesh A-MSDU support
- EHT (Wi-Fi 7) support
- coredump support
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=ITVa
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core:
- Introduce a config option to tweak MAX_SKB_FRAGS. Increasing the
default value allows for better BIG TCP performances
- Reduce compound page head access for zero-copy data transfers
- RPS/RFS improvements, avoiding unneeded NET_RX_SOFTIRQ when
possible
- Threaded NAPI improvements, adding defer skb free support and
unneeded softirq avoidance
- Address dst_entry reference count scalability issues, via false
sharing avoidance and optimize refcount tracking
- Add lockless accesses annotation to sk_err[_soft]
- Optimize again the skb struct layout
- Extends the skb drop reasons to make it usable by multiple
subsystems
- Better const qualifier awareness for socket casts
BPF:
- Add skb and XDP typed dynptrs which allow BPF programs for more
ergonomic and less brittle iteration through data and
variable-sized accesses
- Add a new BPF netfilter program type and minimal support to hook
BPF programs to netfilter hooks such as prerouting or forward
- Add more precise memory usage reporting for all BPF map types
- Adds support for using {FOU,GUE} encap with an ipip device
operating in collect_md mode and add a set of BPF kfuncs for
controlling encap params
- Allow BPF programs to detect at load time whether a particular
kfunc exists or not, and also add support for this in light
skeleton
- Bigger batch of BPF verifier improvements to prepare for upcoming
BPF open-coded iterators allowing for less restrictive looping
capabilities
- Rework RCU enforcement in the verifier, add kptr_rcu and enforce
BPF programs to NULL-check before passing such pointers into kfunc
- Add support for kptrs in percpu hashmaps, percpu LRU hashmaps and
in local storage maps
- Enable RCU semantics for task BPF kptrs and allow referenced kptr
tasks to be stored in BPF maps
- Add support for refcounted local kptrs to the verifier for allowing
shared ownership, useful for adding a node to both the BPF list and
rbtree
- Add BPF verifier support for ST instructions in
convert_ctx_access() which will help new -mcpu=v4 clang flag to
start emitting them
- Add ARM32 USDT support to libbpf
- Improve bpftool's visual program dump which produces the control
flow graph in a DOT format by adding C source inline annotations
Protocols:
- IPv4: Allow adding to IPv4 address a 'protocol' tag. Such value
indicates the provenance of the IP address
- IPv6: optimize route lookup, dropping unneeded R/W lock acquisition
- Add the handshake upcall mechanism, allowing the user-space to
implement generic TLS handshake on kernel's behalf
- Bridge: support per-{Port, VLAN} neighbor suppression, increasing
resilience to nodes failures
- SCTP: add support for Fair Capacity and Weighted Fair Queueing
schedulers
- MPTCP: delay first subflow allocation up to its first usage. This
will allow for later better LSM interaction
- xfrm: Remove inner/outer modes from input/output path. These are
not needed anymore
- WiFi:
- reduced neighbor report (RNR) handling for AP mode
- HW timestamping support
- support for randomized auth/deauth TA for PASN privacy
- per-link debugfs for multi-link
- TC offload support for mac80211 drivers
- mac80211 mesh fast-xmit and fast-rx support
- enable Wi-Fi 7 (EHT) mesh support
Netfilter:
- Add nf_tables 'brouting' support, to force a packet to be routed
instead of being bridged
- Update bridge netfilter and ovs conntrack helpers to handle IPv6
Jumbo packets properly, i.e. fetch the packet length from
hop-by-hop extension header. This is needed for BIT TCP support
- The iptables 32bit compat interface isn't compiled in by default
anymore
- Move ip(6)tables builtin icmp matches to the udptcp one. This has
the advantage that icmp/icmpv6 match doesn't load the
iptables/ip6tables modules anymore when iptables-nft is used
- Extended netlink error report for netdevice in flowtables and
netdev/chains. Allow for incrementally add/delete devices to netdev
basechain. Allow to create netdev chain without device
Driver API:
- Remove redundant Device Control Error Reporting Enable, as PCI core
has already error reporting enabled at enumeration time
- Move Multicast DB netlink handlers to core, allowing devices other
then bridge to use them
- Allow the page_pool to directly recycle the pages from safely
localized NAPI
- Implement lockless TX queue stop/wake combo macros, allowing for
further code de-duplication and sanitization
- Add YNL support for user headers and struct attrs
- Add partial YNL specification for devlink
- Add partial YNL specification for ethtool
- Add tc-mqprio and tc-taprio support for preemptible traffic classes
- Add tx push buf len param to ethtool, specifies the maximum number
of bytes of a transmitted packet a driver can push directly to the
underlying device
- Add basic LED support for switch/phy
- Add NAPI documentation, stop relaying on external links
- Convert dsa_master_ioctl() to netdev notifier. This is a
preparatory work to make the hardware timestamping layer selectable
by user space
- Add transceiver support and improve the error messages for CAN-FD
controllers
New hardware / drivers:
- Ethernet:
- AMD/Pensando core device support
- MediaTek MT7981 SoC
- MediaTek MT7988 SoC
- Broadcom BCM53134 embedded switch
- Texas Instruments CPSW9G ethernet switch
- Qualcomm EMAC3 DWMAC ethernet
- StarFive JH7110 SoC
- NXP CBTX ethernet PHY
- WiFi:
- Apple M1 Pro/Max devices
- RealTek rtl8710bu/rtl8188gu
- RealTek rtl8822bs, rtl8822cs and rtl8821cs SDIO chipset
- Bluetooth:
- Realtek RTL8821CS, RTL8851B, RTL8852BS
- Mediatek MT7663, MT7922
- NXP w8997
- Actions Semi ATS2851
- QTI WCN6855
- Marvell 88W8997
- Can:
- STMicroelectronics bxcan stm32f429
Drivers:
- Ethernet NICs:
- Intel (1G, icg):
- add tracking and reporting of QBV config errors
- add support for configuring max SDU for each Tx queue
- Intel (100G, ice):
- refactor mailbox overflow detection to support Scalable IOV
- GNSS interface optimization
- Intel (i40e):
- support XDP multi-buffer
- nVidia/Mellanox:
- add the support for linux bridge multicast offload
- enable TC offload for egress and engress MACVLAN over bond
- add support for VxLAN GBP encap/decap flows offload
- extend packet offload to fully support libreswan
- support tunnel mode in mlx5 IPsec packet offload
- extend XDP multi-buffer support
- support MACsec VLAN offload
- add support for dynamic msix vectors allocation
- drop RX page_cache and fully use page_pool
- implement thermal zone to report NIC temperature
- Netronome/Corigine:
- add support for multi-zone conntrack offload
- Solarflare/Xilinx:
- support offloading TC VLAN push/pop actions to the MAE
- support TC decap rules
- support unicast PTP
- Other NICs:
- Broadcom (bnxt): enforce software based freq adjustments only on
shared PHC NIC
- RealTek (r8169): refactor to addess ASPM issues during NAPI poll
- Micrel (lan8841): add support for PTP_PF_PEROUT
- Cadence (macb): enable PTP unicast
- Engleder (tsnep): add XDP socket zero-copy support
- virtio-net: implement exact header length guest feature
- veth: add page_pool support for page recycling
- vxlan: add MDB data path support
- gve: add XDP support for GQI-QPL format
- geneve: accept every ethertype
- macvlan: allow some packets to bypass broadcast queue
- mana: add support for jumbo frame
- Ethernet high-speed switches:
- Microchip (sparx5): Add support for TC flower templates
- Ethernet embedded switches:
- Broadcom (b54):
- configure 6318 and 63268 RGMII ports
- Marvell (mv88e6xxx):
- faster C45 bus scan
- Microchip:
- lan966x:
- add support for IS1 VCAP
- better TX/RX from/to CPU performances
- ksz9477: add ETS Qdisc support
- ksz8: enhance static MAC table operations and error handling
- sama7g5: add PTP capability
- NXP (ocelot):
- add support for external ports
- add support for preemptible traffic classes
- Texas Instruments:
- add CPSWxG SGMII support for J7200 and J721E
- Intel WiFi (iwlwifi):
- preparation for Wi-Fi 7 EHT and multi-link support
- EHT (Wi-Fi 7) sniffer support
- hardware timestamping support for some devices/firwmares
- TX beacon protection on newer hardware
- Qualcomm 802.11ax WiFi (ath11k):
- MU-MIMO parameters support
- ack signal support for management packets
- RealTek WiFi (rtw88):
- SDIO bus support
- better support for some SDIO devices (e.g. MAC address from
efuse)
- RealTek WiFi (rtw89):
- HW scan support for 8852b
- better support for 6 GHz scanning
- support for various newer firmware APIs
- framework firmware backwards compatibility
- MediaTek WiFi (mt76):
- P2P support
- mesh A-MSDU support
- EHT (Wi-Fi 7) support
- coredump support"
* tag 'net-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2078 commits)
net: phy: hide the PHYLIB_LEDS knob
net: phy: marvell-88x2222: remove unnecessary (void*) conversions
tcp/udp: Fix memleaks of sk and zerocopy skbs with TX timestamp.
net: amd: Fix link leak when verifying config failed
net: phy: marvell: Fix inconsistent indenting in led_blink_set
lan966x: Don't use xdp_frame when action is XDP_TX
tsnep: Add XDP socket zero-copy TX support
tsnep: Add XDP socket zero-copy RX support
tsnep: Move skb receive action to separate function
tsnep: Add functions for queue enable/disable
tsnep: Rework TX/RX queue initialization
tsnep: Replace modulo operation with mask
net: phy: dp83867: Add led_brightness_set support
net: phy: Fix reading LED reg property
drivers: nfc: nfcsim: remove return value check of `dev_dir`
net: phy: dp83867: Remove unnecessary (void*) conversions
net: ethtool: coalesce: try to make user settings stick twice
net: mana: Check if netdev/napi_alloc_frag returns single page
net: mana: Rename mana_refill_rxoob and remove some empty lines
net: veth: add page_pool stats
...
* The data=journal writepath has been significantly cleaned up and
simplified, and reduces a large number of data=journal special cases
by Jan Kara.
* Ojaswin Muhoo has replaced linked list used to track extents that
have been used for inode preallocation with a red-black tree in the
multi-block allocator. This improves performance for workloads
which do a large number of random allocating writes.
* Thanks to Kemeng Shi for a lot of cleanup and bug fixes in the
multi-block allocator.
* Matthew wilcox has converted the code paths for reading and writing
ext4 pages to use folios.
* Jason Yan has continued to factor out ext4_fill_super() into smaller
functions for improve ease of maintenance and comprehension.
* Josh Triplett has created an uapi header for ext4 userspace API's.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmRHS3IACgkQ8vlZVpUN
gaNN7AgAnFiWfk4UqKpBsUL5iQKJgf2K4tjlNXgPd6ghNns0IdFEyeWSHhr6KLv/
SQeoMMyiWaUcTvZs9DokD8U/9M1ELPUiE9W5c9GxJjM86SXp8BlLYSZTiRoNHzGJ
noQpvikj4qTRviK0rA3q5ICTP2eh1ECHMFJy2wcsZQgwnBelUejQHsTGtOwSvFWF
8wMdfuVtAFDZJjzOxzVKfHP22R5HVRWlAU7P1d97qKjBj4Se3+QchI+zdcIrmU9A
tTmCXj57NpTDyLjS9dIDmLygtTv93lOzOmZS8glw0BFonPcd3ObI4RHVxR+V9xu1
lN13YYgBrK6yfApn9L5XL/31PuLfbg==
=VLBx
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"There are a number of major cleanups in ext4 this cycle:
- The data=journal writepath has been significantly cleaned up and
simplified, and reduces a large number of data=journal special
cases by Jan Kara.
- Ojaswin Muhoo has replaced linked list used to track extents that
have been used for inode preallocation with a red-black tree in the
multi-block allocator. This improves performance for workloads
which do a large number of random allocating writes.
- Thanks to Kemeng Shi for a lot of cleanup and bug fixes in the
multi-block allocator.
- Matthew wilcox has converted the code paths for reading and writing
ext4 pages to use folios.
- Jason Yan has continued to factor out ext4_fill_super() into
smaller functions for improve ease of maintenance and
comprehension.
- Josh Triplett has created an uapi header for ext4 userspace API's"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (105 commits)
ext4: Add a uapi header for ext4 userspace APIs
ext4: remove useless conditional branch code
ext4: remove unneeded check of nr_to_submit
ext4: move dax and encrypt checking into ext4_check_feature_compatibility()
ext4: factor out ext4_block_group_meta_init()
ext4: move s_reserved_gdt_blocks and addressable checking into ext4_check_geometry()
ext4: rename two functions with 'check'
ext4: factor out ext4_flex_groups_free()
ext4: use ext4_group_desc_free() in ext4_put_super() to save some duplicated code
ext4: factor out ext4_percpu_param_init() and ext4_percpu_param_destroy()
ext4: factor out ext4_hash_info_init()
Revert "ext4: Fix warnings when freezing filesystem with journaled data"
ext4: Update comment in mpage_prepare_extent_to_map()
ext4: Simplify handling of journalled data in ext4_bmap()
ext4: Drop special handling of journalled data from ext4_quota_on()
ext4: Drop special handling of journalled data from ext4_evict_inode()
ext4: Fix special handling of journalled data from extent zeroing
ext4: Drop special handling of journalled data from extent shifting operations
ext4: Drop special handling of journalled data from ext4_sync_file()
ext4: Commit transaction before writing back pages in data=journal mode
...
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEe7vIQRWZI0iWSE3xu+CwddJFiJoFAmRCSGEACgkQu+CwddJF
iJpA2wgAkwMP++Znd8JU3iQ4N53lv18euNuEMLTOY+jk7zXHvsRX8KyzLmsohUKO
SSGVi1Om785AidOsJhARJawW7AWYuJ5l7ri+FyskTwrTUcMC4UZ/IT2tB22lRsXi
0f3lgbdArZbj7aq7AVO9N7bh9rgVUHa/RHIwXzMp0sc9nekne9t+FFv7tyRnr7cc
SMp/FdMZqbt9pVf0Uwud1BpdgER7QqQaSfaxITL7D2oJTePRZVWiXerrr4hMcQl1
s6kgUgKdlaYmIx2N8eP1Nmp7undtwHo1C8dLLWKGCEuEAaXIxtXUtaUWFFmBDzH9
Fv6qswNFcfwiLNPsY+xi9iA+vlGKAg==
=T0EM
-----END PGP SIGNATURE-----
Merge tag 'slab-for-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab updates from Vlastimil Babka:
"The main change is naturally the SLOB removal. Since its deprecation
in 6.2 I've seen no complaints so hopefully SLUB_(TINY) works well for
everyone and we can proceed.
Besides the code cleanup, the main immediate benefit will be allowing
kfree() family of function to work on kmem_cache_alloc() objects,
which was incompatible with SLOB. This includes kfree_rcu() which had
no kmem_cache_free_rcu() counterpart yet and now it shouldn't be
necessary anymore.
Besides that, there are several small code and comment improvements
from Thomas, Thorsten and Vernon"
* tag 'slab-for-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
mm/slab: document kfree() as allowed for kmem_cache_alloc() objects
mm/slob: remove slob.c
mm/slab: remove CONFIG_SLOB code from slab common code
mm, pagemap: remove SLOB and SLQB from comments and documentation
mm, page_flags: remove PG_slob_free
mm/slob: remove CONFIG_SLOB
mm/slub: fix help comment of SLUB_DEBUG
mm: slub: make kobj_type structure constant
slab: Adjust comment after refactoring of gfp.h
ACPI:
* Improve error reporting when failing to manage SDEI on AGDI device
removal
Assembly routines:
* Improve register constraints so that the compiler can make use of
the zero register instead of moving an immediate #0 into a GPR
* Allow the compiler to allocate the registers used for CAS
instructions
CPU features and system registers:
* Cleanups to the way in which CPU features are identified from the
ID register fields
* Extend system register definition generation to handle Enum types
when defining shared register fields
* Generate definitions for new _EL2 registers and add new fields
for ID_AA64PFR1_EL1
* Allow SVE to be disabled separately from SME on the kernel
command-line
Tracing:
* Support for "direct calls" in ftrace, which enables BPF tracing
for arm64
Kdump:
* Don't bother unmapping the crashkernel from the linear mapping,
which then allows us to use huge (block) mappings and reduce
TLB pressure when a crashkernel is loaded.
Memory management:
* Try again to remove data cache invalidation from the coherent DMA
allocation path
* Simplify the fixmap code by mapping at page granularity
* Allow the kfence pool to be allocated early, preventing the rest
of the linear mapping from being forced to page granularity
Perf and PMU:
* Move CPU PMU code out to drivers/perf/ where it can be reused
by the 32-bit ARM architecture when running on ARMv8 CPUs
* Fix race between CPU PMU probing and pKVM host de-privilege
* Add support for Apple M2 CPU PMU
* Adjust the generic PERF_COUNT_HW_BRANCH_INSTRUCTIONS event
dynamically, depending on what the CPU actually supports
* Minor fixes and cleanups to system PMU drivers
Stack tracing:
* Use the XPACLRI instruction to strip PAC from pointers, rather
than rolling our own function in C
* Remove redundant PAC removal for toolchains that handle this in
their builtins
* Make backtracing more resilient in the face of instrumentation
Miscellaneous:
* Fix single-step with KGDB
* Remove harmless warning when 'nokaslr' is passed on the kernel
command-line
* Minor fixes and cleanups across the board
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmRChcwQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNCgBCADFvkYY9ESztSnd3EpiMbbAzgRCQBiA5H7U
F2Wc+hIWgeAeUEttSH22+F16r6Jb0gbaDvsuhtN2W/rwQhKNbCU0MaUME05MPmg2
AOp+RZb2vdT5i5S5dC6ZM6G3T6u9O78LBWv2JWBdd6RIybamEn+RL00ep2WAduH7
n1FgTbsKgnbScD2qd4K1ejZ1W/BQMwYulkNpyTsmCIijXM12lkzFlxWnMtky3uhR
POpawcIZzXvWI02QAX+SIdynGChQV3VP+dh9GuFbt7ASigDEhgunvfUYhZNSaqf4
+/q0O8toCtmQJBUhF0DEDSB5T8SOz5v9CKxKuwfaX6Trq0ixFQpZ
=78L9
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"ACPI:
- Improve error reporting when failing to manage SDEI on AGDI device
removal
Assembly routines:
- Improve register constraints so that the compiler can make use of
the zero register instead of moving an immediate #0 into a GPR
- Allow the compiler to allocate the registers used for CAS
instructions
CPU features and system registers:
- Cleanups to the way in which CPU features are identified from the
ID register fields
- Extend system register definition generation to handle Enum types
when defining shared register fields
- Generate definitions for new _EL2 registers and add new fields for
ID_AA64PFR1_EL1
- Allow SVE to be disabled separately from SME on the kernel
command-line
Tracing:
- Support for "direct calls" in ftrace, which enables BPF tracing for
arm64
Kdump:
- Don't bother unmapping the crashkernel from the linear mapping,
which then allows us to use huge (block) mappings and reduce TLB
pressure when a crashkernel is loaded.
Memory management:
- Try again to remove data cache invalidation from the coherent DMA
allocation path
- Simplify the fixmap code by mapping at page granularity
- Allow the kfence pool to be allocated early, preventing the rest of
the linear mapping from being forced to page granularity
Perf and PMU:
- Move CPU PMU code out to drivers/perf/ where it can be reused by
the 32-bit ARM architecture when running on ARMv8 CPUs
- Fix race between CPU PMU probing and pKVM host de-privilege
- Add support for Apple M2 CPU PMU
- Adjust the generic PERF_COUNT_HW_BRANCH_INSTRUCTIONS event
dynamically, depending on what the CPU actually supports
- Minor fixes and cleanups to system PMU drivers
Stack tracing:
- Use the XPACLRI instruction to strip PAC from pointers, rather than
rolling our own function in C
- Remove redundant PAC removal for toolchains that handle this in
their builtins
- Make backtracing more resilient in the face of instrumentation
Miscellaneous:
- Fix single-step with KGDB
- Remove harmless warning when 'nokaslr' is passed on the kernel
command-line
- Minor fixes and cleanups across the board"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (72 commits)
KVM: arm64: Ensure CPU PMU probes before pKVM host de-privilege
arm64: kexec: include reboot.h
arm64: delete dead code in this_cpu_set_vectors()
arm64/cpufeature: Use helper macro to specify ID register for capabilites
drivers/perf: hisi: add NULL check for name
drivers/perf: hisi: Remove redundant initialized of pmu->name
arm64/cpufeature: Consistently use symbolic constants for min_field_value
arm64/cpufeature: Pull out helper for CPUID register definitions
arm64/sysreg: Convert HFGITR_EL2 to automatic generation
ACPI: AGDI: Improve error reporting for problems during .remove()
arm64: kernel: Fix kernel warning when nokaslr is passed to commandline
perf/arm-cmn: Fix port detection for CMN-700
arm64: kgdb: Set PSTATE.SS to 1 to re-enable single-step
arm64: move PAC masks to <asm/pointer_auth.h>
arm64: use XPACLRI to strip PAC
arm64: avoid redundant PAC stripping in __builtin_return_address()
arm64/sme: Fix some comments of ARM SME
arm64/signal: Alloc tpidr2 sigframe after checking system_supports_tpidr2()
arm64/signal: Use system_supports_tpidr2() to check TPIDR2
arm64/idreg: Don't disable SME when disabling SVE
...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCZEYC0gAKCRBZ7Krx/gZQ
6+N5AQCERtd5I2RLm7URX0kurwOthe7o+DX4Lj7y/mcjZV2N4gEAu9VrgHBIuLev
+KuGGY0VnKwCtcgGcGGNBrfrRjyKugs=
=gDk0
-----END PGP SIGNATURE-----
Merge tag 'pull-write-one-page' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs write_one_page removal from Al Viro:
"write_one_page series"
* tag 'pull-write-one-page' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
mm,jfs: move write_one_page/folio_write_one to jfs
ocfs2: don't use write_one_page in ocfs2_duplicate_clusters_by_page
ufs: don't flush page immediately for DIRSYNC directories
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZEEhwgAKCRCRxhvAZXjc
otwgAQDXHnKiPm/d76lITXbxdUNCtvZz+ig26EbOrD+vEszzIQEA81dru0QbCNCt
ctoZdcsmtKbt2VaYQF1CDOhlnNg5VQM=
=pER1
-----END PGP SIGNATURE-----
Merge tag 'v6.4/vfs.acl' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull acl updates from Christian Brauner:
"After finishing the introduction of the new posix acl api last cycle
the generic POSIX ACL xattr handlers are still around in the
filesystems xattr handlers for two reasons:
(1) Because a few filesystems rely on the ->list() method of the
generic POSIX ACL xattr handlers in their ->listxattr() inode
operation.
(2) POSIX ACLs are only available if IOP_XATTR is raised. The
IOP_XATTR flag is raised in inode_init_always() based on whether
the sb->s_xattr pointer is non-NULL. IOW, the registered xattr
handlers of the filesystem are used to raise IOP_XATTR. Removing
the generic POSIX ACL xattr handlers from all filesystems would
risk regressing filesystems that only implement POSIX ACL support
and no other xattrs (nfs3 comes to mind).
This contains the work to decouple POSIX ACLs from the IOP_XATTR flag
as they don't depend on xattr handlers anymore. So it's now possible
to remove the generic POSIX ACL xattr handlers from the sb->s_xattr
list of all filesystems. This is a crucial step as the generic POSIX
ACL xattr handlers aren't used for POSIX ACLs anymore and POSIX ACLs
don't depend on the xattr infrastructure anymore.
Adressing problem (1) will require more long-term work. It would be
best to get rid of the ->list() method of xattr handlers completely at
some point.
For erofs, ext{2,4}, f2fs, jffs2, ocfs2, and reiserfs the nop POSIX
ACL xattr handler is kept around so they can continue to use
array-based xattr handler indexing.
This update does simplify the ->listxattr() implementation of all
these filesystems however"
* tag 'v6.4/vfs.acl' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
acl: don't depend on IOP_XATTR
ovl: check for ->listxattr() support
reiserfs: rework priv inode handling
fs: rename generic posix acl handlers
reiserfs: rework ->listxattr() implementation
fs: simplify ->listxattr() implementation
fs: drop unused posix acl handlers
xattr: remove unused argument
xattr: add listxattr helper
xattr: simplify listxattr helpers
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZEEvmQAKCRCRxhvAZXjc
omUmAP0YaHa0gGgC1HEqZUpr0wRCo9WCyDCIZh3CYHUsgSwtvAD/Skl3jeWPPhlm
pmRA2DDxmwYFP3vhhFMjP+Z6AuUpEQQ=
=9XpZ
-----END PGP SIGNATURE-----
Merge tag 'v6.4/kernel.user_worker' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull user work thread updates from Christian Brauner:
"This contains the work generalizing the ability to create a kernel
worker from a userspace process.
Such user workers will run with the same credentials as the userspace
process they were created from providing stronger security and
accounting guarantees than the traditional override_creds() approach
ever could've hoped for.
The original work was heavily based and optimzed for the needs of
io_uring which was the first user. However, as it quickly turned out
the ability to create user workers inherting properties from a
userspace process is generally useful.
The vhost subsystem currently creates workers using the kthread api.
The consequences of using the kthread api are that RLIMITs don't work
correctly as they are inherited from khtreadd. This leads to bugs
where more workers are created than would be allowed by the RLIMITs of
the userspace process in lieu of which workers are created.
Problems like this disappear with user workers created from the
userspace processes for which they perform the work. In addition,
providing this api allows vhost to remove additional complexity. For
example, cgroup and mm sharing will just work out of the box with user
workers based on the relevant userspace process instead of manually
ensuring the correct cgroup and mm contexts are used.
So the vhost subsystem should simply be made to use the same mechanism
as io_uring. To this end the original mechanism used for
create_io_thread() is generalized into user workers:
- Introduce PF_USER_WORKER as a generic indicator that a given task
is a user worker, i.e., a kernel task that was created from a
userspace process. Now a PF_IO_WORKER thread is just a specialized
version of PF_USER_WORKER. So io_uring io workers raise both flags.
- Make copy_process() available to core kernel code
- Extend struct kernel_clone_args with the following bitfields
allowing to indicate to copy_process():
- to create a user worker (raise PF_USER_WORKER)
- to not inherit any files from the userspace process
- to ignore signals
After all generic changes are in place the vhost subsystem implements
a new dedicated vhost api based on user workers. Finally, vhost is
switched to rely on the new api moving it off of kthreads.
Thanks to Mike for sticking it out and making it through this rather
arduous journey"
* tag 'v6.4/kernel.user_worker' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
vhost: use vhost_tasks for worker threads
vhost: move worker thread fields to new struct
vhost_task: Allow vhost layer to use copy_process
fork: allow kernel code to call copy_process
fork: Add kernel_clone_args flag to ignore signals
fork: add kernel_clone_args flag to not dup/clone files
fork/vm: Move common PF_IO_WORKER behavior to new flag
kernel: Make io_thread and kthread bit fields
kthread: Pass in the thread's name during creation
kernel: Allow a kernel thread's name to be set in copy_process
csky: Remove kernel_thread declaration
o MAINTAINERS files additions and changes.
o Fix hotplug warning in nohz code.
o Tick dependency changes by Zqiang.
o Lazy-RCU shrinker fixes by Zqiang.
o rcu-tasks stall reporting improvements by Neeraj.
o Initial changes for renaming of k[v]free_rcu() to its new k[v]free_rcu_mightsleep()
name for robustness.
o Documentation Updates:
o Significant changes to srcu_struct size.
o Deadlock detection for srcu_read_lock() vs synchronize_srcu() from Boqun.
o rcutorture and rcu-related tool, which are targeted for v6.4 from Boqun's tree.
o Other misc changes.
-----BEGIN PGP SIGNATURE-----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=Rgbj
-----END PGP SIGNATURE-----
Merge tag 'rcu.6.4.april5.2023.3' of git://git.kernel.org/pub/scm/linux/kernel/git/jfern/linux
Pull RCU updates from Joel Fernandes:
- Updates and additions to MAINTAINERS files, with Boqun being added to
the RCU entry and Zqiang being added as an RCU reviewer.
I have also transitioned from reviewer to maintainer; however, Paul
will be taking over sending RCU pull-requests for the next merge
window.
- Resolution of hotplug warning in nohz code, achieved by fixing
cpu_is_hotpluggable() through interaction with the nohz subsystem.
Tick dependency modifications by Zqiang, focusing on fixing usage of
the TICK_DEP_BIT_RCU_EXP bitmask.
- Avoid needless calls to the rcu-lazy shrinker for CONFIG_RCU_LAZY=n
kernels, fixed by Zqiang.
- Improvements to rcu-tasks stall reporting by Neeraj.
- Initial renaming of k[v]free_rcu() to k[v]free_rcu_mightsleep() for
increased robustness, affecting several components like mac802154,
drbd, vmw_vmci, tracing, and more.
A report by Eric Dumazet showed that the API could be unknowingly
used in an atomic context, so we'd rather make sure they know what
they're asking for by being explicit:
https://lore.kernel.org/all/20221202052847.2623997-1-edumazet@google.com/
- Documentation updates, including corrections to spelling,
clarifications in comments, and improvements to the srcu_size_state
comments.
- Better srcu_struct cache locality for readers, by adjusting the size
of srcu_struct in support of SRCU usage by Christoph Hellwig.
- Teach lockdep to detect deadlocks between srcu_read_lock() vs
synchronize_srcu() contributed by Boqun.
Previously lockdep could not detect such deadlocks, now it can.
- Integration of rcutorture and rcu-related tools, targeted for v6.4
from Boqun's tree, featuring new SRCU deadlock scenarios, test_nmis
module parameter, and more
- Miscellaneous changes, various code cleanups and comment improvements
* tag 'rcu.6.4.april5.2023.3' of git://git.kernel.org/pub/scm/linux/kernel/git/jfern/linux: (71 commits)
checkpatch: Error out if deprecated RCU API used
mac802154: Rename kfree_rcu() to kvfree_rcu_mightsleep()
rcuscale: Rename kfree_rcu() to kfree_rcu_mightsleep()
ext4/super: Rename kfree_rcu() to kfree_rcu_mightsleep()
net/mlx5: Rename kfree_rcu() to kfree_rcu_mightsleep()
net/sysctl: Rename kvfree_rcu() to kvfree_rcu_mightsleep()
lib/test_vmalloc.c: Rename kvfree_rcu() to kvfree_rcu_mightsleep()
tracing: Rename kvfree_rcu() to kvfree_rcu_mightsleep()
misc: vmw_vmci: Rename kvfree_rcu() to kvfree_rcu_mightsleep()
drbd: Rename kvfree_rcu() to kvfree_rcu_mightsleep()
rcu: Protect rcu_print_task_exp_stall() ->exp_tasks access
rcu: Avoid stack overflow due to __rcu_irq_enter_check_tick() being kprobe-ed
rcu-tasks: Report stalls during synchronize_srcu() in rcu_tasks_postscan()
rcu: Permit start_poll_synchronize_rcu_expedited() to be invoked early
rcu: Remove never-set needwake assignment from rcu_report_qs_rdp()
rcu: Register rcu-lazy shrinker only for CONFIG_RCU_LAZY=y kernels
rcu: Fix missing TICK_DEP_MASK_RCU_EXP dependency check
rcu: Fix set/clear TICK_DEP_BIT_RCU_EXP bitmask race
rcu/trace: use strscpy() to instead of strncpy()
tick/nohz: Fix cpu_is_hotpluggable() by checking with nohz subsystem
...
-----BEGIN PGP SIGNATURE-----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=EaE9
-----END PGP SIGNATURE-----
Merge tag 'iter-ubuf.2-2023-04-21' of git://git.kernel.dk/linux
Pull ITER_UBUF updates from Jens Axboe:
"This turns singe vector imports into ITER_UBUF, rather than
ITER_IOVEC.
The former is more trivial to iterate and advance, and hence a bit
more efficient. From some very unscientific testing, ~60% of all iovec
imports are single vector"
* tag 'iter-ubuf.2-2023-04-21' of git://git.kernel.dk/linux:
iov_iter: Mark copy_compat_iovec_from_user() noinline
iov_iter: import single vector iovecs as ITER_UBUF
iov_iter: convert import_single_range() to ITER_UBUF
iov_iter: overlay struct iovec and ubuf/len
iov_iter: set nr_segs = 1 for ITER_UBUF
iov_iter: remove iov_iter_iovec()
iov_iter: add iter_iov_addr() and iter_iov_len() helpers
ALSA: pcm: check for user backed iterator, not specific iterator type
IB/qib: check for user backed iterator, not specific iterator type
IB/hfi1: check for user backed iterator, not specific iterator type
iov_iter: add iter_iovec() helper
block: ensure bio_alloc_map_data() deals with ITER_UBUF correctly
Instead of having callers care about the mmap_min_addr logic for the
lowest valid mapping address (and some of them getting it wrong), just
move the logic into vm_unmapped_area() itself. One less thing for various
architecture cases (and generic helpers) to worry about.
We should really try to make much more of this be common code, but baby
steps..
Without this, vm_unmapped_area() could return an address below
mmap_min_addr (because some caller forgot about that). That then causes
the mmap machinery to think it has found a workable address, but then
later security_mmap_addr(addr) is unhappy about it and the mmap() returns
with a nonsensical error (EPERM).
The proper action is to either return ENOMEM (if the virtual address space
is exhausted), or try to find another address (ie do a bottom-up search
for free addresses after the top-down one failed).
See commit 2afc745f3e ("mm: ensure get_unmapped_area() returns higher
address than mmap_min_addr"), which fixed this for one call site (the
generic arch_get_unmapped_area_topdown() fallback) but left other cases
alone.
Link: https://lkml.kernel.org/r/20230418214009.1142926-1-Liam.Howlett@oracle.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Liam Howlett <liam.howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
If the page fault handler requests a retry, we will count the fault
multiple times. This is a relatively harmless problem as the retry paths
are not often requested, and the only user-visible problem is that the
fault counter will be slightly higher than it should be. Nevertheless,
userspace only took one fault, and should not see the fact that the kernel
had to retry the fault multiple times.
Move page fault accounting into mm_account_fault() and skip incomplete
faults which will be accounted upon completion.
Link: https://lkml.kernel.org/r/20230419175836.3857458-1-surenb@google.com
Fixes: d065bd810b ("mm: retry page fault when blocking on disk transfer")
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Peter Xu <peterx@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Jan Kara <jack@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Laurent Dufour <ldufour@linux.ibm.com>
Cc: Liam R. Howlett <Liam.Howlett@Oracle.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Michel Lespinasse <michel@lespinasse.org>
Cc: Minchan Kim <minchan@google.com>
Cc: Punit Agrawal <punit.agrawal@bytedance.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
zsmalloc pool can be compacted concurrently by many contexts,
e.g.
cc1 handle_mm_fault()
do_anonymous_page()
__alloc_pages_slowpath()
try_to_free_pages()
do_try_to_free_pages(
lru_gen_shrink_node()
shrink_slab()
do_shrink_slab()
zs_shrinker_scan()
zs_compact()
Pool compaction is currently (basically) single-threaded as
it is performed under pool->lock. Having multiple compaction
threads results in unnecessary contention, as each thread
competes for pool->lock. This, in turn, affects all zsmalloc
operations such as zs_malloc(), zs_map_object(), zs_free(), etc.
Introduce the pool->compaction_in_progress atomic variable,
which ensures that only one compaction context can run at a
time. This reduces overall pool->lock contention in (corner)
cases when many contexts attempt to shrink zspool simultaneously.
Link: https://lkml.kernel.org/r/20230418074639.1903197-1-senozhatsky@chromium.org
Fixes: c0547d0b6a ("zsmalloc: consolidate zs_pool's migrate_lock and size_class's locks")
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Yosry Ahmed <yosryahmed@google.com>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This adds the general_profit KSM sysfs knob and the process profit metric
knobs to ksm_stat.
1) expose general_profit metric
The documentation mentions a general profit metric, however this
metric is not calculated. In addition the formula depends on the size
of internal structures, which makes it more difficult for an
administrator to make the calculation. Adding the metric for a better
user experience.
2) document general_profit sysfs knob
3) calculate ksm process profit metric
The ksm documentation mentions the process profit metric and how to
calculate it. This adds the calculation of the metric.
4) mm: expose ksm process profit metric in ksm_stat
This exposes the ksm process profit metric in /proc/<pid>/ksm_stat.
The documentation mentions the formula for the ksm process profit
metric, however it does not calculate it. In addition the formula
depends on the size of internal structures. So it makes sense to
expose it.
5) document new procfs ksm knobs
Link: https://lkml.kernel.org/r/20230418051342.1919757-3-shr@devkernel.io
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Rik van Riel <riel@surriel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm: process/cgroup ksm support", v9.
So far KSM can only be enabled by calling madvise for memory regions. To
be able to use KSM for more workloads, KSM needs to have the ability to be
enabled / disabled at the process / cgroup level.
Use case 1:
The madvise call is not available in the programming language. An
example for this are programs with forked workloads using a garbage
collected language without pointers. In such a language madvise cannot
be made available.
In addition the addresses of objects get moved around as they are
garbage collected. KSM sharing needs to be enabled "from the outside"
for these type of workloads.
Use case 2:
The same interpreter can also be used for workloads where KSM brings
no benefit or even has overhead. We'd like to be able to enable KSM on
a workload by workload basis.
Use case 3:
With the madvise call sharing opportunities are only enabled for the
current process: it is a workload-local decision. A considerable number
of sharing opportunities may exist across multiple workloads or jobs (if
they are part of the same security domain). Only a higler level entity
like a job scheduler or container can know for certain if its running
one or more instances of a job. That job scheduler however doesn't have
the necessary internal workload knowledge to make targeted madvise
calls.
Security concerns:
In previous discussions security concerns have been brought up. The
problem is that an individual workload does not have the knowledge about
what else is running on a machine. Therefore it has to be very
conservative in what memory areas can be shared or not. However, if the
system is dedicated to running multiple jobs within the same security
domain, its the job scheduler that has the knowledge that sharing can be
safely enabled and is even desirable.
Performance:
Experiments with using UKSM have shown a capacity increase of around 20%.
Here are the metrics from an instagram workload (taken from a machine
with 64GB main memory):
full_scans: 445
general_profit: 20158298048
max_page_sharing: 256
merge_across_nodes: 1
pages_shared: 129547
pages_sharing: 5119146
pages_to_scan: 4000
pages_unshared: 1760924
pages_volatile: 10761341
run: 1
sleep_millisecs: 20
stable_node_chains: 167
stable_node_chains_prune_millisecs: 2000
stable_node_dups: 2751
use_zero_pages: 0
zero_pages_sharing: 0
After the service is running for 30 minutes to an hour, 4 to 5 million
shared pages are common for this workload when using KSM.
Detailed changes:
1. New options for prctl system command
This patch series adds two new options to the prctl system call.
The first one allows to enable KSM at the process level and the second
one to query the setting.
The setting will be inherited by child processes.
With the above setting, KSM can be enabled for the seed process of a cgroup
and all processes in the cgroup will inherit the setting.
2. Changes to KSM processing
When KSM is enabled at the process level, the KSM code will iterate
over all the VMA's and enable KSM for the eligible VMA's.
When forking a process that has KSM enabled, the setting will be
inherited by the new child process.
3. Add general_profit metric
The general_profit metric of KSM is specified in the documentation,
but not calculated. This adds the general profit metric to
/sys/kernel/debug/mm/ksm.
4. Add more metrics to ksm_stat
This adds the process profit metric to /proc/<pid>/ksm_stat.
5. Add more tests to ksm_tests and ksm_functional_tests
This adds an option to specify the merge type to the ksm_tests.
This allows to test madvise and prctl KSM.
It also adds a two new tests to ksm_functional_tests: one to test
the new prctl options and the other one is a fork test to verify that
the KSM process setting is inherited by client processes.
This patch (of 3):
So far KSM can only be enabled by calling madvise for memory regions. To
be able to use KSM for more workloads, KSM needs to have the ability to be
enabled / disabled at the process / cgroup level.
1. New options for prctl system command
This patch series adds two new options to the prctl system call.
The first one allows to enable KSM at the process level and the second
one to query the setting.
The setting will be inherited by child processes.
With the above setting, KSM can be enabled for the seed process of a
cgroup and all processes in the cgroup will inherit the setting.
2. Changes to KSM processing
When KSM is enabled at the process level, the KSM code will iterate
over all the VMA's and enable KSM for the eligible VMA's.
When forking a process that has KSM enabled, the setting will be
inherited by the new child process.
1) Introduce new MMF_VM_MERGE_ANY flag
This introduces the new flag MMF_VM_MERGE_ANY flag. When this flag
is set, kernel samepage merging (ksm) gets enabled for all vma's of a
process.
2) Setting VM_MERGEABLE on VMA creation
When a VMA is created, if the MMF_VM_MERGE_ANY flag is set, the
VM_MERGEABLE flag will be set for this VMA.
3) support disabling of ksm for a process
This adds the ability to disable ksm for a process if ksm has been
enabled for the process with prctl.
4) add new prctl option to get and set ksm for a process
This adds two new options to the prctl system call
- enable ksm for all vmas of a process (if the vmas support it).
- query if ksm has been enabled for a process.
3. Disabling MMF_VM_MERGE_ANY for storage keys in s390
In the s390 architecture when storage keys are used, the
MMF_VM_MERGE_ANY will be disabled.
Link: https://lkml.kernel.org/r/20230418051342.1919757-1-shr@devkernel.io
Link: https://lkml.kernel.org/r/20230418051342.1919757-2-shr@devkernel.io
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The permissions for the files here are swapped as "count" is read-only and
"scan" is write-only. While this doesn't really matter as these
permissions don't stop the files being opened for reading/writing as
appropriate, they are shown by "ls -l" and are confusing.
Link: https://lkml.kernel.org/r/20230418101906.3131303-1-john@metanate.com
Signed-off-by: John Keeping <john@metanate.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Staring at the comment "Recheck VMA as permissions can change since
migration started" in remove_migration_pte() can result in confusion,
because if the source PTE/PMD indicates write permissions, then there
should be no need to check VMA write permissions when restoring migration
entries or PTE-mapping a PMD.
Commit d3cb8bf608 ("mm: migrate: Close race between migration completion
and mprotect") introduced the maybe_mkwrite() handling in
remove_migration_pte() in 2014, stating that a race between mprotect() and
migration finishing would be possible, and that we could end up with a
writable PTE that should be readable.
However, mprotect() code first updates vma->vm_flags / vma->vm_page_prot
and then walks the page tables to (a) set all present writable PTEs to
read-only and (b) convert all writable migration entries to readable
migration entries. While walking the page tables and modifying the
entries, migration code has to grab the PT locks to synchronize against
concurrent page table modifications.
Assuming migration would find a writable migration entry (while holding
the PT lock) and replace it with a writable present PTE, surely mprotect()
code didn't stumble over the writable migration entry yet (converting it
into a readable migration entry) and would instead wait for the PT lock to
convert the now present writable PTE into a read-only PTE. As mprotect()
didn't finish yet, the behavior is just like migration didn't happen: a
writable PTE will be converted to a read-only PTE.
So it's fine to rely on the writability information in the source PTE/PMD
and not recheck against the VMA as long as we're holding the PT lock to
synchronize with anyone who concurrently wants to downgrade write
permissions (like mprotect()) by first adjusting vma->vm_flags /
vma->vm_page_prot to then walk over the page tables to adjust the page
table entries.
Running test cases that should reveal such races -- mprotect(PROT_READ)
racing with page migration or THP splitting -- for multiple hours did not
reveal an issue with this cleanup.
Link: https://lkml.kernel.org/r/20230418142113.439494-1-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In commit fd4a7ac329 ("mm: migrate: try again if THP split is failed due
to page refcnt"), if the THP splitting fails due to page reference count,
we will retry to improve migration successful rate. But the failed
splitting is counted as migration failure and migration retry, which will
cause duplicated failure counting. So, in this patch, this is fixed via
undoing the failure counting if we decide to retry. The patch is tested
via failure injection.
Link: https://lkml.kernel.org/r/20230416235929.1040194-1-ying.huang@intel.com
Fixes: fd4a7ac329 ("mm: migrate: try again if THP split is failed due to page refcnt")
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We can use range_in_vma() to check if dst_start, dst_start + len are
within the dst_vma range. Minor readability improvement.
Link: https://lkml.kernel.org/r/20230417003919.930515-1-zhangpeng362@huawei.com
Signed-off-by: ZhangPeng <zhangpeng362@huawei.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Nanyong Sun <sunnanyong@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Both of them change the arg from page_list to folio_list when convert them
to use a folio, but not the declaration, let's correct it, also move the
reclaim_pages() from swap.h to internal.h as it only used in mm.
Link: https://lkml.kernel.org/r/20230417114807.186786-1-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviwed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: SeongJae Park <sj@kernel.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When we try to unshare a pinned page for a private hugetlb, uffd-wp bit
can get lost during unsharing.
When above condition met, one can lose uffd-wp bit on the privately mapped
hugetlb page. It allows the page to be writable even if it should still be
wr-protected. I assume it can mean data loss.
This should be very rare, only if an unsharing happened on a private
hugetlb page with uffd-wp protected (e.g. in a child which shares the
same page with parent with UFFD_FEATURE_EVENT_FORK enabled).
When I wrote the reproducer (provided in the last patch) I needed to
use the newest gup_test cmd introduced by David to trigger it because I
don't even know another way to do a proper RO longerm pin.
Besides that, it needs a bunch of other conditions all met:
(1) hugetlb being mapped privately,
(2) userfaultfd registered with WP and EVENT_FORK,
(3) the user app fork()s, then,
(4) RO longterm pin onto a wr-protected anonymous page.
If it's not impossible to hit in production I'd say extremely rare.
Link: https://lkml.kernel.org/r/20230417195317.898696-3-peterx@redhat.com
Fixes: 166f3ecc0d ("mm/hugetlb: hook page faults for uffd write protection")
Signed-off-by: Peter Xu <peterx@redhat.com>
Reported-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Mika Penttilä <mpenttil@redhat.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/hugetlb: More fixes around uffd-wp vs fork() / RO pins",
v2.
This patch (of 6):
There're a bunch of things that were wrong:
- Reading uffd-wp bit from a swap entry should use pte_swp_uffd_wp()
rather than huge_pte_uffd_wp().
- When copying over a pte, we should drop uffd-wp bit when
!EVENT_FORK (aka, when !userfaultfd_wp(dst_vma)).
- When doing early CoW for private hugetlb (e.g. when the parent page was
pinned), uffd-wp bit should be properly carried over if necessary.
No bug reported probably because most people do not even care about these
corner cases, but they are still bugs and can be exposed by the recent unit
tests introduced, so fix all of them in one shot.
Link: https://lkml.kernel.org/r/20230417195317.898696-1-peterx@redhat.com
Link: https://lkml.kernel.org/r/20230417195317.898696-2-peterx@redhat.com
Fixes: bc70fbf269 ("mm/hugetlb: handle uffd-wp during fork()")
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Mika Penttilä <mpenttil@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
hwpoison_user_mappings() is updated to support ksm pages, and add
collect_procs_ksm() to collect processes when the error hit an ksm page.
The difference from collect_procs_anon() is that it also needs to traverse
the rmap-item list on the stable node of the ksm page. At the same time,
add_to_kill_ksm() is added to handle ksm pages. And
task_in_to_kill_list() is added to avoid duplicate addition of tsk to the
to_kill list. This is because when scanning the list, if the pages that
make up the ksm page all come from the same process, they may be added
repeatedly.
Link: https://lkml.kernel.org/r/20230414021741.2597273-3-xialonglong1@huawei.com
Signed-off-by: Longlong Xia <xialonglong1@huawei.com>
Tested-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Nanyong Sun <sunnanyong@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm: ksm: support hwpoison for ksm page", v2.
Currently, ksm does not support hwpoison. As ksm is being used more
widely for deduplication at the system level, container level, and process
level, supporting hwpoison for ksm has become increasingly important.
However, ksm pages were not processed by hwpoison in 2009 [1].
The main method of implementation:
1. Refactor add_to_kill() and add new add_to_kill_*() to better
accommodate the handling of different types of pages.
2. Add collect_procs_ksm() to collect processes when the error hit an
ksm page.
3. Add task_in_to_kill_list() to avoid duplicate addition of tsk to
the to_kill list.
4. Try_to_unmap ksm page (already supported).
5. Handle related processes such as sending SIGBUS.
Tested with poisoning to ksm page from
1) different process
2) one process
and with/without memory_failure_early_kill set, the processes are killed
as expected with the patchset.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/
commit/?h=01e00f880ca700376e1845cf7a2524ebe68e47d6
This patch (of 2):
The page_address_in_vma() is used to find the user virtual address of page
in add_to_kill(), but it doesn't support ksm due to the ksm page->index
unusable, add an ksm_addr as parameter to add_to_kill(), let's the caller
to pass it, also rename the function to __add_to_kill(), and adding
add_to_kill_anon_file() for handling anonymous pages and file pages,
adding add_to_kill_fsdax() for handling fsdax pages.
Link: https://lkml.kernel.org/r/20230414021741.2597273-1-xialonglong1@huawei.com
Link: https://lkml.kernel.org/r/20230414021741.2597273-2-xialonglong1@huawei.com
Signed-off-by: Longlong Xia <xialonglong1@huawei.com>
Tested-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Nanyong Sun <sunnanyong@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The interface for fcntl expects the argument passed for the command
F_ADD_SEALS to be of type int. The current code wrongly treats it as a
long. In order to avoid access to undefined bits, we should explicitly
cast the argument to int.
This commit changes the signature of all the related and helper functions
so that they treat the argument as int instead of long.
Link: https://lkml.kernel.org/r/20230414152459.816046-5-Luca.Vizzarro@arm.com
Signed-off-by: Luca Vizzarro <Luca.Vizzarro@arm.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Kevin Brodsky <Kevin.Brodsky@arm.com>
Cc: Vincenzo Frascino <Vincenzo.Frascino@arm.com>
Cc: Szabolcs Nagy <Szabolcs.Nagy@arm.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: David Laight <David.Laight@ACULAB.com>
Cc: Mark Rutland <Mark.Rutland@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Android 14 and later default to MGLRU [1] and field telemetry showed
occasional long tail latency (>100ms) in the reclaim path.
Tracing revealed priority inversion in the reclaim path. In
try_to_inc_max_seq(), when high priority tasks were blocked on
wait_event_killable(), the preemption of the low priority task to call
wake_up_all() caused those high priority tasks to wait longer than
necessary. In general, this problem is not different from others of its
kind, e.g., one caused by mutex_lock(). However, it is specific to MGLRU
because it introduced the new wait queue lruvec->mm_state.wait.
The purpose of this new wait queue is to avoid the thundering herd
problem. If many direct reclaimers rush into try_to_inc_max_seq(), only
one can succeed, i.e., the one to wake up the rest, and the rest who
failed might cause premature OOM kills if they do not wait. So far there
is no evidence supporting this scenario, based on how often the wait has
been hit. And this begs the question how useful the wait queue is in
practice.
Based on Minchan's recommendation, which is in line with his commit
6d4675e601 ("mm: don't be stuck to rmap lock on reclaim path") and the
rest of the MGLRU code which also uses trylock when possible, remove the
wait queue.
[1] https://android-review.googlesource.com/q/I7ed7fbfd6ef9ce10053347528125dd98c39e50bf
Link: https://lkml.kernel.org/r/20230413214326.2147568-1-kaleshsingh@google.com
Fixes: bd74fdaea1 ("mm: multi-gen LRU: support page table walks")
Signed-off-by: Kalesh Singh <kaleshsingh@google.com>
Suggested-by: Minchan Kim <minchan@kernel.org>
Reported-by: Wei Wang <wvw@google.com>
Acked-by: Yu Zhao <yuzhao@google.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Jan Alexander Steffens (heftig) <heftig@archlinux.org>
Cc: Oleksandr Natalenko <oleksandr@natalenko.name>
Cc: Suleiman Souhlal <suleiman@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The calculation of workingset size is the core logic of handling refault,
it had been updated several times[1][2] after workingset.c was created[3].
But the description hadn't been updated accordingly, this mismatch may
confuse the readers. So we update the description to make it consistent
to the code.
[1] commit 34e58cac6d ("mm: workingset: let cache workingset challenge anon")
[2] commit aae466b005 ("mm/swap: implement workingset detection for anonymous LRU")
[3] commit a528910e12 ("mm: thrash detection-based file cache sizing")
Link: https://lkml.kernel.org/r/202304131634494948454@zte.com.cn
Signed-off-by: Yang Yang <yang.yang29@zte.com.cn>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The console tracepoint is used by kcsan/kasan/kfence/kmsan test modules.
Since this tracepoint is not exported, these modules iterate over all
available tracepoints to find the console trace point. Export the trace
point so that it can be directly used.
Link: https://lkml.kernel.org/r/20230413100859.1492323-1-quic_pkondeti@quicinc.com
Signed-off-by: Pavankumar Kondeti <quic_pkondeti@quicinc.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Marco Elver <elver@google.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
During reclaim, we keep track of pages reclaimed from other means than
LRU-based reclaim through scan_control->reclaim_state->reclaimed_slab,
which we stash a pointer to in current task_struct.
However, we keep track of more than just reclaimed slab pages through
this. We also use it for clean file pages dropped through pruned inodes,
and xfs buffer pages freed. Rename reclaimed_slab to reclaimed, and add a
helper function that wraps updating it through current, so that future
changes to this logic are contained within include/linux/swap.h.
Link: https://lkml.kernel.org/r/20230413104034.1086717-4-yosryahmed@google.com
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Lameter <cl@linux.com>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: NeilBrown <neilb@suse.de>
Cc: Peter Xu <peterx@redhat.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Move set_task_reclaim_state() near flush_reclaim_state() so that all
helpers manipulating reclaim_state are in close proximity.
Link: https://lkml.kernel.org/r/20230413104034.1086717-3-yosryahmed@google.com
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Lameter <cl@linux.com>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: NeilBrown <neilb@suse.de>
Cc: Peter Xu <peterx@redhat.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "Ignore non-LRU-based reclaim in memcg reclaim", v6.
Upon running some proactive reclaim tests using memory.reclaim, we noticed
some tests flaking where writing to memory.reclaim would be successful
even though we did not reclaim the requested amount fully Looking further
into it, I discovered that *sometimes* we overestimate the number of
reclaimed pages in memcg reclaim.
Reclaimed pages through other means than LRU-based reclaim are tracked
through reclaim_state in struct scan_control, which is stashed in current
task_struct. These pages are added to the number of reclaimed pages
through LRUs. For memcg reclaim, these pages generally cannot be linked
to the memcg under reclaim and can cause an overestimated count of
reclaimed pages. This short series tries to address that.
Patch 1 ignores pages reclaimed outside of LRU reclaim in memcg reclaim.
The pages are uncharged anyway, so even if we end up under-reporting
reclaimed pages we will still succeed in making progress during charging.
Patches 2-3 are just refactoring. Patch 2 moves set_reclaim_state()
helper next to flush_reclaim_state(). Patch 3 adds a helper that wraps
updating current->reclaim_state, and renames reclaim_state->reclaimed_slab
to reclaim_state->reclaimed.
This patch (of 3):
We keep track of different types of reclaimed pages through
reclaim_state->reclaimed_slab, and we add them to the reported number of
reclaimed pages. For non-memcg reclaim, this makes sense. For memcg
reclaim, we have no clue if those pages are charged to the memcg under
reclaim.
Slab pages are shared by different memcgs, so a freed slab page may have
only been partially charged to the memcg under reclaim. The same goes for
clean file pages from pruned inodes (on highmem systems) or xfs buffer
pages, there is no simple way to currently link them to the memcg under
reclaim.
Stop reporting those freed pages as reclaimed pages during memcg reclaim.
This should make the return value of writing to memory.reclaim, and may
help reduce unnecessary reclaim retries during memcg charging. Writing to
memory.reclaim on the root memcg is considered as cgroup_reclaim(), but
for this case we want to include any freed pages, so use the
global_reclaim() check instead of !cgroup_reclaim().
Generally, this should make the return value of
try_to_free_mem_cgroup_pages() more accurate. In some limited cases (e.g.
freed a slab page that was mostly charged to the memcg under reclaim),
the return value of try_to_free_mem_cgroup_pages() can be underestimated,
but this should be fine. The freed pages will be uncharged anyway, and we
can charge the memcg the next time around as we usually do memcg reclaim
in a retry loop.
Link: https://lkml.kernel.org/r/20230413104034.1086717-1-yosryahmed@google.com
Link: https://lkml.kernel.org/r/20230413104034.1086717-2-yosryahmed@google.com
Fixes: f2fe7b09a5 ("mm: memcg/slab: charge individual slab objects
instead of pages")
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Lameter <cl@linux.com>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: NeilBrown <neilb@suse.de>
Cc: Peter Xu <peterx@redhat.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
To prevent errors when vmap_pages_range_noflush() or
__vmap_pages_range_noflush() silently fail (see the link below for an
example), annotate them with __must_check so that the callers do not
unconditionally assume the mapping succeeded.
Link: https://lkml.kernel.org/r/20230413131223.4135168-4-glider@google.com
Signed-off-by: Alexander Potapenko <glider@google.com>
Reported-by: Dipanjan Das <mail.dipanjan.das@gmail.com>
Link: https://lore.kernel.org/linux-mm/CANX2M5ZRrRA64k0hOif02TjmY9kbbO2aCBPyq79es34RXZ=cAw@mail.gmail.com/
Reviewed-by: Marco Elver <elver@google.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
copy-on-write of hugetlb user pages with uncorrectable errors will result
in a kernel crash. This is because the copy is performed in kernel mode
and in general we can not handle accessing memory with such errors while
in kernel mode. Commit a873dfe103 ("mm, hwpoison: try to recover from
copy-on write faults") introduced the routine copy_user_highpage_mc() to
gracefully handle copying of user pages with uncorrectable errors.
However, the separate hugetlb copy-on-write code paths were not modified
as part of commit a873dfe103.
Modify hugetlb copy-on-write code paths to use copy_mc_user_highpage() so
that they can also gracefully handle uncorrectable errors in user pages.
This involves changing the hugetlb specific routine
copy_user_large_folio() from type void to int so that it can return an
error. Modify the hugetlb userfaultfd code in the same way so that it can
return -EHWPOISON if it encounters an uncorrectable error.
Link: https://lkml.kernel.org/r/20230413131349.2524210-1-liushixin2@huawei.com
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Acked-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In a kernel with added WARN_ON_ONCE(PageTail) in page_memcg_check(), we
observed a warning from page_cgroup_ino() when reading /proc/kpagecgroup.
This warning was added to catch fragile reads of a page memcg. Make
page_cgroup_ino() get memcg from the page's folio using
folio_memcg_check(): that gives it the correct memcg for each page of a
folio, so is the right fix.
Note that page_folio() is racy, the page's folio can change from under us,
but the entire function is racy and documented as such.
I dithered between the right fix and the safer "fix": it's unlikely but
conceivable that some userspace has learnt that /proc/kpagecgroup gives no
memcg on tail pages, and compensates for that in some (racy) way: so
continuing to give no memcg on tails, without warning, might be safer.
But hwpoison_filter_task(), the only other user of page_cgroup_ino(),
persuaded me. It looks as if it currently leaves out tail pages of the
selected memcg, by mistake: whereas hwpoison_inject() uses compound_head()
and expects the tails to be included. So hwpoison testing coverage has
probably been restricted by the wrong output from page_cgroup_ino() (if
that memcg filter is used at all): in the short term, it might be safer
not to enable wider coverage there, but long term we would regret that.
This is based on a patch originally written by Hugh Dickins and retains
most of the original commit log [1]
The patch was changed to use folio_memcg_check(page_folio(page)) instead
of page_memcg_check(compound_head(page)) based on discussions with Matthew
Wilcox; where he stated that callers of page_memcg_check() should stop
using it due to the ambiguity around tail pages -- instead they should use
folio_memcg_check() and handle tail pages themselves.
Link: https://lkml.kernel.org/r/20230412003451.4018887-1-yosryahmed@google.com
Link: https://lore.kernel.org/linux-mm/20230313083452.1319968-1-yosryahmed@google.com/ [1]
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Now we use ARCH_WANT_HUGETLB_PAGE_OPTIMIZE_VMEMMAP config option to
indicate devdax and hugetlb vmemmap optimization support. Hence rename
that to a generic ARCH_WANT_OPTIMIZE_VMEMMAP
Link: https://lkml.kernel.org/r/20230412050025.84346-2-aneesh.kumar@linux.ibm.com
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Tarun Sahu <tsahu@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The difference between sc->nr_reclaimed and nr_reclaimed is computed three
times. Introduce a new variable to record the value, so it only needs to
be computed once.
Link: https://lkml.kernel.org/r/20230411061757.12041-1-haifeng.xu@shopee.com
Signed-off-by: Haifeng Xu <haifeng.xu@shopee.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
No need to call maybe_mkwrite() to then wrprotect if the source PMD was not
writable.
It's worth nothing that this now allows for PTEs to be writable even if
the source PMD was not writable: if vma->vm_page_prot includes write
permissions.
As documented in commit 931298e103 ("mm/userfaultfd: rely on
vma->vm_page_prot in uffd_wp_range()"), any mechanism that intends to
have pages wrprotected (COW, writenotify, mprotect, uffd-wp, softdirty,
...) has to properly adjust vma->vm_page_prot upfront, to not include
write permissions. If vma->vm_page_prot includes write permissions, the
PTE/PMD can be writable as default.
This now mimics the handling in mm/migrate.c:remove_migration_pte() and in
mm/huge_memory.c:remove_migration_pmd(), which has been in place for a
long time (except that 96a9c287e2 ("mm/migrate: fix wrongly apply write
bit after mkdirty on sparc64") temporarily changed it).
Link: https://lkml.kernel.org/r/20230411142512.438404-7-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Hugh Dickins <hughd@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This reverts commit 624a2c94f5 ("Partly revert "mm/thp: carry over dirty
bit when thp splits on pmd"") and the fixup in commit e833bc5034
("mm/thp: re-apply mkdirty for small pages after split").
Now that sparc64 mkdirty handling is fixed and no longer sets a PTE/PMD
writable that shouldn't be writable, let's revert the temporary fix and
remove the stale comment.
The mkdirty mm selftest still passes with this change on sparc64.
Note that loongarch handling was fixed in commit bf2f34a506 ("LoongArch:
Set _PAGE_DIRTY only if _PAGE_WRITE is set in {pmd,pte}_mkdirty()")
Link: https://lkml.kernel.org/r/20230411142512.438404-6-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Hugh Dickins <hughd@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This reverts commit 96a9c287e2 ("mm/migrate: fix wrongly apply write bit
after mkdirty on sparc64").
Now that sparc64 mkdirty handling is fixed and no longer sets a PTE/PMD
writable that shouldn't be writable, let's revert the temporary fix.
The mkdirty mm selftest still passes with this change on sparc64.
Note that loongarch handling was fixed in commit bf2f34a506 ("LoongArch:
Set _PAGE_DIRTY only if _PAGE_WRITE is set in {pmd,pte}_mkdirty()").
Link: https://lkml.kernel.org/r/20230411142512.438404-5-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Hugh Dickins <hughd@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
smatch reports
mm/backing-dev.c:266:1: warning: symbol
'dev_attr_min_bytes' was not declared. Should it be static?
mm/backing-dev.c:294:1: warning: symbol
'dev_attr_max_bytes' was not declared. Should it be static?
These variables are only used in one file so should be static.
Link: https://lkml.kernel.org/r/20230408141609.2703647-1-trix@redhat.com
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Convert mfill_atomic_pte_copy(), shmem_mfill_atomic_pte() and
mfill_atomic_pte() to take in a folio pointer.
Convert mfill_atomic() to use a folio. Convert page_kaddr to kaddr in
mfill_atomic().
Link: https://lkml.kernel.org/r/20230410133932.32288-7-zhangpeng362@huawei.com
Signed-off-by: ZhangPeng <zhangpeng362@huawei.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nanyong Sun <sunnanyong@huawei.com>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Replace copy_user_huge_page() with copy_user_large_folio().
copy_user_large_folio() does the same as copy_user_huge_page(), but takes
in folios instead of pages. Remove pages_per_huge_page from
copy_user_large_folio(), because we can get that from folio_nr_pages(dst).
Convert copy_user_gigantic_page() to take in folios.
Link: https://lkml.kernel.org/r/20230410133932.32288-6-zhangpeng362@huawei.com
Signed-off-by: ZhangPeng <zhangpeng362@huawei.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nanyong Sun <sunnanyong@huawei.com>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Convert hugetlb_mfill_atomic_pte() to take in a folio pointer instead of
a page pointer.
Convert mfill_atomic_hugetlb() to use a folio.
Link: https://lkml.kernel.org/r/20230410133932.32288-5-zhangpeng362@huawei.com
Signed-off-by: ZhangPeng <zhangpeng362@huawei.com>
Reviewed-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nanyong Sun <sunnanyong@huawei.com>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Replace copy_huge_page_from_user() with copy_folio_from_user().
copy_folio_from_user() does the same as copy_huge_page_from_user(), but
takes in a folio instead of a page.
Convert page_kaddr to kaddr in copy_folio_from_user() to do indenting
cleanup.
Link: https://lkml.kernel.org/r/20230410133932.32288-4-zhangpeng362@huawei.com
Signed-off-by: ZhangPeng <zhangpeng362@huawei.com>
Reviewed-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nanyong Sun <sunnanyong@huawei.com>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
kmap() and kmap_atomic() are being deprecated in favor of
kmap_local_page() which is appropriate for any thread local context.[1]
Let's replace the kmap() and kmap_atomic() with kmap_local_page() in
copy_huge_page_from_user(). When allow_pagefault is false, disable page
faults to prevent potential deadlock.[2]
[1] https://lore.kernel.org/all/20220813220034.806698-1-ira.weiny@intel.com/
[2] https://lkml.kernel.org/r/20221025220136.2366143-1-ira.weiny@intel.com
Link: https://lkml.kernel.org/r/20230410133932.32288-3-zhangpeng362@huawei.com
Signed-off-by: ZhangPeng <zhangpeng362@huawei.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nanyong Sun <sunnanyong@huawei.com>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "userfaultfd: convert userfaultfd functions to use folios",
v6.
This patch series converts several userfaultfd functions to use folios.
This patch (of 6):
Call vma_alloc_folio() directly instead of alloc_page_vma() and convert
page_kaddr to kaddr in mfill_atomic_pte_copy(). Removes several calls to
compound_head().
Link: https://lkml.kernel.org/r/20230410133932.32288-1-zhangpeng362@huawei.com
Link: https://lkml.kernel.org/r/20230410133932.32288-2-zhangpeng362@huawei.com
Signed-off-by: ZhangPeng <zhangpeng362@huawei.com>
Reviewed-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nanyong Sun <sunnanyong@huawei.com>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Commit 700d2e9a36 ("mm, page_alloc: reduce page alloc/free sanity
checks") has introduced a new static key check_pages_enabled to control
when struct pages are sanity checked during allocation and freeing. Mel
Gorman suggested that free_tail_pages_check() could use this static key as
well, instead of relying on CONFIG_DEBUG_VM. That makes sense, so do
that. Also rename the function to free_tail_page_prepare() because it
works on a single tail page and has a struct page preparation component as
well as the optional checking component.
Also remove some unnecessary unlikely() within static_branch_unlikely()
statements that Mel pointed out for commit 700d2e9a36.
Link: https://lkml.kernel.org/r/20230405142840.11068-1-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Suggested-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Alexander Halbuer <halbuer@sra.uni-hannover.de>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
If we end up with a writable migration entry that has the uffd-wp bit set,
we already messed up: the source PTE/PMD was writable, which means we
could have modified the page without notifying uffd first. Setting the
uffd-wp bit always implies converting migration entries to !writable
migration entries.
Commit 8f34f1eac3 ("mm/userfaultfd: fix uffd-wp special cases for
fork()") documents that "3. Forget to carry over uffd-wp bit for a write
migration huge pmd entry", but it doesn't really say why that should be
relevant.
So let's remove that code to avoid hiding an eventual underlying issue (in
the future, we might want to warn when creating writable migration entries
that have the uffd-wp bit set -- or even better when turning a PTE
writable that still has the uffd-wp bit set).
This now matches the handling for hugetlb migration entries in
hugetlb_change_protection().
In copy_huge_pmd()/copy_nonpresent_pte()/copy_hugetlb_page_range(), we
still transfer the uffd-bit also for writable migration entries, but
simply because we have unified handling for "writable" and
"readable-exclusive" migration entries, and we care about transferring the
uffd-wp bit for the latter.
Link: https://lkml.kernel.org/r/20230405160236.587705-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Since we have updated mlock to use folios, it's better to call
folios_put() instead of calling release_pages() directly.
Link: https://lkml.kernel.org/r/20230405161854.6931-2-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Using vma_lookup() verifies the address is contained in the found vma.
This results in easier to read the code.
Link: https://lkml.kernel.org/r/20230404094515.1883552-1-zhangpeng362@huawei.com
Signed-off-by: ZhangPeng <zhangpeng362@huawei.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
cgroups v1 has a unique way of setting up memory pressure notifications:
the user opens "memory.pressure_level" of the cgroup they want to monitor
for pressure, then open "cgroup.event_control" and write the fd (among
other things) to that file. memory.pressure_level has no other use,
specifically it does not support any read or write operations.
Consequently, no handlers are provided, and cgroup_file_mode() sets the
permissions to 000. However, to actually use the mechanism, the
subscribing user must have read access to the file and open the fd for
reading, see memcg_write_event_control().
This is all fine as long as the subscribing process runs as root and is
otherwise unconfined by further restrictions. However, if you add strict
access controls such as selinux, the permission bits will be enforced, and
opening memory.pressure_level for reading will fail, preventing the
process from subscribing, even as root.
To work around this issue, introduce a dummy read handler. When
memory.pressure_level is created, cgroup_file_mode() will notice the
existence of a handler, and therefore add read permissions to the file.
Link: https://lkml.kernel.org/r/20230404105900.2005-1-flosch@nutanix.com
Signed-off-by: Florian Schmidt <flosch@nutanix.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Make sure that collapse_file doesn't interfere with checking the uptodate
flag in the page cache by only inserting hpage into the page cache after
it has been updated and marked uptodate. This is achieved by simply not
replacing present pages with hpage when iterating over the target range.
The present pages are already locked, so replacing them with the locked
hpage before the collapse is finalized is unnecessary. However, it is
necessary to stop freezing the present pages after validating them, since
leaving long-term frozen pages in the page cache can lead to deadlocks.
Simply checking the reference count is sufficient to ensure that there are
no long-term references hanging around that would the collapse would
break. Similar to hpage, there is no reason that the present pages
actually need to be frozen in addition to being locked.
This fixes a race where folio_seek_hole_data would mistake hpage for an
fallocated but unwritten page. This race is visible to userspace via data
temporarily disappearing from SEEK_DATA/SEEK_HOLE. This also fixes a
similar race where pages could temporarily disappear from mincore.
Link: https://lkml.kernel.org/r/20230404120117.2562166-5-stevensd@google.com
Fixes: f3f0e1d215 ("khugepaged: add support of collapse for tmpfs/shmem pages")
Signed-off-by: David Stevens <stevensd@chromium.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jiaqi Yan <jiaqiyan@google.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Make sure that collapse_file respects any userfaultfds registered with
MODE_MISSING. If userspace has any such userfaultfds registered, then for
any page which it knows to be missing, it may expect a
UFFD_EVENT_PAGEFAULT. This means collapse_file needs to be careful when
collapsing a shmem range would result in replacing an empty page with a
THP, to avoid breaking userfaultfd.
Synchronization when checking for userfaultfds in collapse_file is tricky
because the mmap locks can't be used to prevent races with the
registration of new userfaultfds. Instead, we provide synchronization by
ensuring that userspace cannot observe the fact that pages are missing
before we check for userfaultfds. Although this allows registration of a
userfaultfd to race with collapse_file, it ensures that userspace cannot
observe any pages transition from missing to present after such a race
occurs. This makes such a race indistinguishable to the collapse
occurring immediately before the userfaultfd registration.
The first step to provide this synchronization is to stop filling gaps
during the loop iterating over the target range, since the page cache lock
can be dropped during that loop. The second step is to fill the gaps with
XA_RETRY_ENTRY after the page cache lock is acquired the final time, to
avoid races with accesses to the page cache that only take the RCU read
lock.
The fact that we don't fill holes during the initial iteration means that
collapse_file now has to handle faults occurring during the collapse.
This is done by re-validating the number of missing pages after acquiring
the page cache lock for the final time.
This fix is targeted at khugepaged, but the change also applies to
MADV_COLLAPSE. MADV_COLLAPSE on a range with a userfaultfd will now
return EBUSY if there are any missing pages (instead of succeeding on
shmem and returning EINVAL on anonymous memory). There is also now a
window during MADV_COLLAPSE where a fault on a missing page will cause the
syscall to fail with EAGAIN.
The fact that intermediate page cache state can no longer be observed
before the rollback of a failed collapse is also technically a
userspace-visible change (via at least SEEK_DATA and SEEK_END), but it is
exceedingly unlikely that anything relies on being able to observe that
transient state.
Link: https://lkml.kernel.org/r/20230404120117.2562166-4-stevensd@google.com
Signed-off-by: David Stevens <stevensd@chromium.org>
Acked-by: Peter Xu <peterx@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jiaqi Yan <jiaqiyan@google.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add a rollback label to deal with failure, instead of continuously
checking for RESULT_SUCCESS, to make it easier to add more failure cases.
The refactoring also allows the collapse_file tracepoint to include hpage
on success (instead of NULL).
Link: https://lkml.kernel.org/r/20230404120117.2562166-3-stevensd@google.com
Signed-off-by: David Stevens <stevensd@chromium.org>
Acked-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jiaqi Yan <jiaqiyan@google.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/khugepaged: fixes for khugepaged+shmem", v6.
This series reworks collapse_file so that the intermediate state of the
collapse does not leak out of collapse_file. Although this makes
collapse_file a bit more complicated, it means that the rest of the
kernel doesn't have to deal with the unusual state. This directly fixes
races with both lseek and mincore.
This series also fixes the fact that khugepaged completely breaks
userfaultfd+shmem. The rework of collapse_file provides a convenient
place to check for registered userfaultfds without making the shmem
userfaultfd implementation care about khugepaged.
Finally, this series adds a lru_add_drain after swapping in shmem pages,
which makes the subsequent folio_isolate_lru significantly more likely to
succeed.
This patch (of 4):
Call lru_add_drain after swapping in shmem pages so that isolate_lru_page
is more likely to succeed.
Link: https://lkml.kernel.org/r/20230404120117.2562166-1-stevensd@google.com
Link: https://lkml.kernel.org/r/20230404120117.2562166-2-stevensd@google.com
Signed-off-by: David Stevens <stevensd@chromium.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jiaqi Yan <jiaqiyan@google.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Make collapse_file roll back when copying pages failed. More concretely:
- extract copying operations into a separate loop
- postpone the updates for nr_none until both scanning and copying
succeeded
- postpone joining small xarray entries until both scanning and copying
succeeded
- postpone the update operations to NR_XXX_THPS until both scanning and
copying succeeded
- for non-SHMEM file, roll back filemap_nr_thps_inc if scan succeeded but
copying failed
Tested manually:
0. Enable khugepaged on system under test. Mount tmpfs at /mnt/ramdisk.
1. Start a two-thread application. Each thread allocates a chunk of
non-huge memory buffer from /mnt/ramdisk.
2. Pick 4 random buffer address (2 in each thread) and inject
uncorrectable memory errors at physical addresses.
3. Signal both threads to make their memory buffer collapsible, i.e.
calling madvise(MADV_HUGEPAGE).
4. Wait and then check kernel log: khugepaged is able to recover from
poisoned pages by skipping them.
5. Signal both threads to inspect their buffer contents and make sure no
data corruption.
Link: https://lkml.kernel.org/r/20230329151121.949896-4-jiaqiyan@google.com
Signed-off-by: Jiaqi Yan <jiaqiyan@google.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: David Stevens <stevensd@chromium.org>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Tong Tiangen <tongtiangen@huawei.com>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Problem
=======
Memory DIMMs are subject to multi-bit flips, i.e. memory errors. As
memory size and density increase, the chances of and number of memory
errors increase. The increasing size and density of server RAM in the
data center and cloud have shown increased uncorrectable memory errors.
There are already mechanisms in the kernel to recover from uncorrectable
memory errors. This series of patches provides the recovery mechanism for
the particular kernel agent khugepaged when it collapses memory pages.
Impact
======
The main reason we chose to make khugepaged collapsing tolerant of memory
failures was its high possibility of accessing poisoned memory while
performing functionally optional compaction actions. Standard
applications typically don't have strict requirements on the size of its
pages. So they are given 4K pages by the kernel. The kernel is able to
improve application performance by either
1) giving applications 2M pages to begin with, or
2) collapsing 4K pages into 2M pages when possible.
This collapsing operation is done by khugepaged, a kernel agent that is
constantly scanning memory. When collapsing 4K pages into a 2M page, it
must copy the data from the 4K pages into a physically contiguous 2M page.
Therefore, as long as there exists one poisoned cache line in collapsible
4K pages, khugepaged will eventually access it. The current impact to
users is a machine check exception triggered kernel panic. However,
khugepaged’s compaction operations are not functionally required kernel
actions. Therefore making khugepaged tolerant to poisoned memory will
greatly improve user experience.
This patch series is for cases where khugepaged is the first guy that
detects the memory errors on the poisoned pages. IOW, the pages are not
known to have memory errors when khugepaged collapsing gets to them. In
our observation, this happens frequently when the huge page ratio of the
system is relatively low, which is fairly common in virtual machines
running on cloud.
Solution
========
As stated before, it is less desirable to crash the system only because
khugepaged accesses poisoned pages while it is collapsing 4K pages. The
high level idea of this patch series is to skip the group of pages
(usually 512 4K-size pages) once khugepaged finds one of them is poisoned,
as these pages have become ineligible to be collapsed.
We are also careful to unwind operations khuagepaged has performed before
it detects memory failures. For example, before copying and collapsing a
group of anonymous pages into a huge page, the source pages will be
isolated and their page table is unlinked from their PMD. These
operations need to be undone in order to ensure these pages are not
changed/lost from the perspective of other threads (both user and kernel
space). As for file backed memory pages, there already exists a rollback
case. This patch just extends it so that khugepaged also correctly rolls
back when it fails to copy poisoned 4K pages.
This patch (of 3):
Make __collapse_huge_page_copy return whether copying anonymous pages
succeeded, and make collapse_huge_page handle the return status.
Break existing PTE scan loop into two for-loops. The first loop copies
source pages into target huge page, and can fail gracefully when running
into memory errors in source pages. If copying all pages succeeds, the
second loop releases and clears up these normal pages. Otherwise, the
second loop rolls back the page table and page states by:
- re-establishing the original PTEs-to-PMD connection.
- releasing source pages back to their LRU list.
Tested manually:
0. Enable khugepaged on system under test.
1. Start a two-thread application. Each thread allocates a chunk of
non-huge anonymous memory buffer.
2. Pick 4 random buffer locations (2 in each thread) and inject
uncorrectable memory errors at corresponding physical addresses.
3. Signal both threads to make their memory buffer collapsible, i.e.
calling madvise(MADV_HUGEPAGE).
4. Wait and check kernel log: khugepaged is able to recover from poisoned
pages and skips collapsing them.
5. Signal both threads to inspect their buffer contents and make sure no
data corruption.
Link: https://lkml.kernel.org/r/20230329151121.949896-1-jiaqiyan@google.com
Link: https://lkml.kernel.org/r/20230329151121.949896-2-jiaqiyan@google.com
Signed-off-by: Jiaqi Yan <jiaqiyan@google.com>
Cc: David Stevens <stevensd@chromium.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Tong Tiangen <tongtiangen@huawei.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In some situations, we may end up calling memcg_rstat_updated() with a
value of 0, which means the stat was not actually updated. An example is
if we fail to reclaim any pages in shrink_folio_list().
Do not add the cgroup to the rstat updated tree in this case, to avoid
unnecessarily flushing it.
Link: https://lkml.kernel.org/r/20230330191801.1967435-9-yosryahmed@google.com
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vasily Averin <vasily.averin@linux.dev>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Memory reclaim is a sleepable context. Flushing is an expensive operaiton
that scales with the number of cpus and the number of cgroups in the
system, so avoid doing it atomically unnecessarily. This can slow down
reclaim code if flushing stats is taking too long, but there is already
multiple cond_resched()'s in reclaim code.
Link: https://lkml.kernel.org/r/20230330191801.1967435-8-yosryahmed@google.com
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vasily Averin <vasily.averin@linux.dev>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In workingset_refault(), we call
mem_cgroup_flush_stats_atomic_ratelimited() to read accurate stats within
an RCU read section and with sleeping disallowed. Move the call above the
RCU read section to make it non-atomic.
Flushing is an expensive operation that scales with the number of cpus and
the number of cgroups in the system, so avoid doing it atomically where
possible.
Since workingset_refault() is the only caller of
mem_cgroup_flush_stats_atomic_ratelimited(), just make it non-atomic, and
rename it to mem_cgroup_flush_stats_ratelimited().
Link: https://lkml.kernel.org/r/20230330191801.1967435-7-yosryahmed@google.com
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vasily Averin <vasily.averin@linux.dev>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Currently, all contexts that flush memcg stats do so with sleeping not
allowed. Some of these contexts are perfectly safe to sleep in, such as
reading cgroup files from userspace or the background periodic flusher.
Flushing is an expensive operation that scales with the number of cpus and
the number of cgroups in the system, so avoid doing it atomically where
possible.
Refactor the code to make mem_cgroup_flush_stats() non-atomic (aka
sleepable), and provide a separate atomic version. The atomic version is
used in reclaim, refault, writeback, and in mem_cgroup_usage(). All other
code paths are left to use the non-atomic version. This includes
callbacks for userspace reads and the periodic flusher.
Since refault is the only caller of mem_cgroup_flush_stats_ratelimited(),
change it to mem_cgroup_flush_stats_atomic_ratelimited(). Reclaim and
refault code paths are modified to do non-atomic flushing in separate
later patches -- so it will eventually be changed back to
mem_cgroup_flush_stats_ratelimited().
Link: https://lkml.kernel.org/r/20230330191801.1967435-6-yosryahmed@google.com
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vasily Averin <vasily.averin@linux.dev>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
As Johannes notes in [1], stats_flush_lock is currently used to:
(a) Protect updated to stats_flush_threshold.
(b) Protect updates to flush_next_time.
(c) Serializes calls to cgroup_rstat_flush() based on those ratelimits.
However:
1. stats_flush_threshold is already an atomic
2. flush_next_time is not atomic. The writer is locked, but the reader
is lockless. If the reader races with a flush, you could see this:
if (time_after(jiffies, flush_next_time))
spin_trylock()
flush_next_time = now + delay
flush()
spin_unlock()
spin_trylock()
flush_next_time = now + delay
flush()
spin_unlock()
which means we already can get flushes at a higher frequency than
FLUSH_TIME during races. But it isn't really a problem.
The reader could also see garbled partial updates if the compiler
decides to split the write, so it needs at least READ_ONCE and
WRITE_ONCE protection.
3. Serializing cgroup_rstat_flush() calls against the ratelimit
factors is currently broken because of the race in 2. But the race
is actually harmless, all we might get is the occasional earlier
flush. If there is no delta, the flush won't do much. And if there
is, the flush is justified.
So the lock can be removed all together. However, the lock also served
the purpose of preventing a thundering herd problem for concurrent
flushers, see [2]. Use an atomic instead to serve the purpose of
unifying concurrent flushers.
[1]https://lore.kernel.org/lkml/20230323172732.GE739026@cmpxchg.org/
[2]https://lore.kernel.org/lkml/20210716212137.1391164-2-shakeelb@google.com/
Link: https://lkml.kernel.org/r/20230330191801.1967435-5-yosryahmed@google.com
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vasily Averin <vasily.averin@linux.dev>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Currently, the only context in which we can invoke an rstat flush from irq
context is through mem_cgroup_usage() on the root memcg when called from
memcg_check_events(). An rstat flush is an expensive operation that
should not be done in irq context, so do not flush stats and use the stale
stats in this case.
Arguably, usage threshold events are not reliable on the root memcg anyway
since its usage is ill-defined.
Link: https://lkml.kernel.org/r/20230330191801.1967435-4-yosryahmed@google.com
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Suggested-by: Johannes Weiner <hannes@cmpxchg.org>
Suggested-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vasily Averin <vasily.averin@linux.dev>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
mem_cgroup_flush_stats_delayed() suggests his is using a delayed_work, but
this is actually sometimes flushing directly from the callsite.
What it's doing is ratelimited calls. A better name would be
mem_cgroup_flush_stats_ratelimited().
Link: https://lkml.kernel.org/r/20230330191801.1967435-3-yosryahmed@google.com
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Suggested-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vasily Averin <vasily.averin@linux.dev>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "memcg: avoid flushing stats atomically where possible", v3.
rstat flushing is an expensive operation that scales with the number of
cpus and the number of cgroups in the system. The purpose of this series
is to minimize the contexts where we flush stats atomically.
Patches 1 and 2 are cleanups requested during reviews of prior versions of
this series.
Patch 3 makes sure we never try to flush from within an irq context.
Patches 4 to 7 introduce separate variants of mem_cgroup_flush_stats() for
atomic and non-atomic flushing, and make sure we only flush the stats
atomically when necessary.
Patch 8 is a slightly tangential optimization that limits the work done by
rstat flushing in some scenarios.
This patch (of 8):
cgroup_rstat_flush_irqsafe() can be a confusing name. It may read as
"irqs are disabled throughout", which is what the current implementation
does (currently under discussion [1]), but is not the intention. The
intention is that this function is safe to call from atomic contexts.
Name it as such.
Link: https://lkml.kernel.org/r/20230330191801.1967435-1-yosryahmed@google.com
Link: https://lkml.kernel.org/r/20230330191801.1967435-2-yosryahmed@google.com
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Suggested-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vasily Averin <vasily.averin@linux.dev>
Cc: Zefan Li <lizefan.x@bytedance.com>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In __kfence_alloc() and __kfence_free(), we will set and check canary.
Assuming that the size of the object is close to 0, nearly 4k memory
accesses are required because setting and checking canary is executed byte
by byte.
canary is now defined like this:
KFENCE_CANARY_PATTERN(addr) ((u8)0xaa ^ (u8)((unsigned long)(addr) & 0x7))
Observe that canary is only related to the lower three bits of the
address, so every 8 bytes of canary are the same. We can access 8-byte
canary each time instead of byte-by-byte, thereby optimizing nearly 4k
memory accesses to 4k/8 times.
Use the bcc tool funclatency to measure the latency of __kfence_alloc()
and __kfence_free(), the numbers (deleted the distribution of latency) is
posted below. Though different object sizes will have an impact on the
measurement, we ignore it for now and assume the average object size is
roughly equal.
Before patching:
__kfence_alloc:
avg = 5055 nsecs, total: 5515252 nsecs, count: 1091
__kfence_free:
avg = 5319 nsecs, total: 9735130 nsecs, count: 1830
After patching:
__kfence_alloc:
avg = 3597 nsecs, total: 6428491 nsecs, count: 1787
__kfence_free:
avg = 3046 nsecs, total: 3415390 nsecs, count: 1121
The numbers indicate that there is ~30% - ~40% performance improvement.
Link: https://lkml.kernel.org/r/20230403122738.6006-1-zhangpeng.00@bytedance.com
Signed-off-by: Peng Zhang <zhangpeng.00@bytedance.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Since some users may not use zswap, the zswap_pool is wasted. Save memory
by delaying the initialization of zswap until enabled.
[liushixin2@huawei.com: fix some pattern problem suggested by Christoph]
Link: https://lkml.kernel.org/r/20230411093632.822290-4-liushixin2@huawei.com
Link: https://lkml.kernel.org/r/20230403121318.1876082-4-liushixin2@huawei.com
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The zswap_init_started variable name has a bit confusing. Actually, there
are three state: uninitialized, initial failed and initial succeed. Add a
new variable zswap_init_state to replace zswap_init_{started/failed}.
Link: https://lkml.kernel.org/r/20230403121318.1876082-3-liushixin2@huawei.com
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "Delay the initialization of zswap", v9.
In the initialization of zswap, about 18MB memory will be allocated for
zswap_pool. Since some users may not use zswap, the zswap_pool is wasted.
Save memory by delaying the initialization of zswap until enabled.
This patch (of 3):
Remove zswap_entry_cache_create and zswap_entry_cache_destroy and use
kmem_cache_* function directly.
Link: https://lkml.kernel.org/r/20230411093632.822290-1-liushixin2@huawei.com
Link: https://lkml.kernel.org/r/20230403121318.1876082-1-liushixin2@huawei.com
Link: https://lkml.kernel.org/r/20230403121318.1876082-2-liushixin2@huawei.com
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Short the name of the addr_to_vb_xarray() function to the addr_to_vb_xa().
This aligns with other internal function abbreviations.
Link: https://lkml.kernel.org/r/20230331073727.6968-1-urezki@gmail.com
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Suggested-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Oleksiy Avramchenko <oleksiy.avramchenko@sony.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
kmemleak-test.c was moved to the samples directory in 1abbef4f51
("mm,kmemleak-test.c: move kmemleak-test.c to samples dir").
If CONFIG_DEBUG_KMEMLEAK_TEST=m and CONFIG_SAMPLES is unset,
kmemleak-test.c will be unnecessarily compiled.
So move the entry for CONFIG_DEBUG_KMEMLEAK_TEST from mm/Kconfig and add a
new CONFIG_SAMPLE_KMEMLEAK in samples/ to control whether kmemleak-test.c
is built or not.
Link: https://lkml.kernel.org/r/20230330060904.292975-1-gehao@kylinos.cn
Fixes: 1abbef4f51 ("mm,kmemleak-test.c: move kmemleak-test.c to samples dir")
Signed-off-by: Hao Ge <gehao@kylinos.cn>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Alex Gaynor <alex.gaynor@gmail.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Finn Behrens <me@kloenk.dev>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Tony Krowiak <akrowiak@linux.ibm.com>
Cc: Ye Xingchen <ye.xingchen@zte.com.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
A global vmap_blocks-xarray array can be contented under heavy usage of
the vm_map_ram()/vm_unmap_ram() APIs. The lock_stat shows that a
"vmap_blocks.xa_lock" lock is a second in a top-list when it comes to
contentions:
<snip>
----------------------------------------
class name con-bounces contentions ...
----------------------------------------
vmap_area_lock: 2554079 2554276 ...
--------------
vmap_area_lock 1297948 [<00000000dd41cbaa>] alloc_vmap_area+0x1c7/0x910
vmap_area_lock 1256330 [<000000009d927bf3>] free_vmap_block+0x4a/0xe0
vmap_area_lock 1 [<00000000c95c05a7>] find_vm_area+0x16/0x70
--------------
vmap_area_lock 1738590 [<00000000dd41cbaa>] alloc_vmap_area+0x1c7/0x910
vmap_area_lock 815688 [<000000009d927bf3>] free_vmap_block+0x4a/0xe0
vmap_area_lock 1 [<00000000c1d619d7>] __get_vm_area_node+0xd2/0x170
vmap_blocks.xa_lock: 862689 862698 ...
-------------------
vmap_blocks.xa_lock 378418 [<00000000625a5626>] vm_map_ram+0x359/0x4a0
vmap_blocks.xa_lock 484280 [<00000000caa2ef03>] xa_erase+0xe/0x30
-------------------
vmap_blocks.xa_lock 576226 [<00000000caa2ef03>] xa_erase+0xe/0x30
vmap_blocks.xa_lock 286472 [<00000000625a5626>] vm_map_ram+0x359/0x4a0
...
<snip>
that is a result of running vm_map_ram()/vm_unmap_ram() in
a loop. The test creates 64(on 64 CPUs system) threads and
each one maps/unmaps 1 page.
After this change the "xa_lock" can be considered as a noise
in the same test condition:
<snip>
...
&xa->xa_lock#1: 10333 10394 ...
--------------
&xa->xa_lock#1 5349 [<00000000bbbc9751>] xa_erase+0xe/0x30
&xa->xa_lock#1 5045 [<0000000018def45d>] vm_map_ram+0x3a4/0x4f0
--------------
&xa->xa_lock#1 7326 [<0000000018def45d>] vm_map_ram+0x3a4/0x4f0
&xa->xa_lock#1 3068 [<00000000bbbc9751>] xa_erase+0xe/0x30
...
<snip>
Running the test_vmalloc.sh run_test_mask=1024 nr_threads=64 nr_pages=5
shows around ~8 percent of throughput improvement of vm_map_ram() and
vm_unmap_ram() APIs.
This patch does not fix vmap_area_lock/free_vmap_area_lock and
purge_vmap_area_lock bottle-necks, it is rather a separate rework.
Link: https://lkml.kernel.org/r/20230330190639.431589-1-urezki@gmail.com
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com>
Reviewed-by: Baoquan He <bhe@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Oleksiy Avramchenko <oleksiy.avramchenko@sony.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The free_area_empty() helper is only used inside mm/ so move it there to
reduce noise in include/linux/mmzone.h
Link: https://lkml.kernel.org/r/20230326160215.2674531-1-rppt@kernel.org
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Suggested-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
After commit 446ec83805 ("mm/page_alloc: use might_alloc()") and commit
84172f4bb7 ("mm/page_alloc: combine __alloc_pages and
__alloc_pages_nodemask"), the comment is no longer accurate. Flag
'__GFP_DIRECT_RECLAIM' is clear enough on its own, so remove the comment
rather than update it.
Link: https://lkml.kernel.org/r/20230327034149.942-1-thunder.leizhen@huawei.com
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Sidhartha Kumar removed the last caller of PageHeadHuge(), so we can now
remove it and make folio_test_hugetlb() the real implementation. Add
kernel-doc for folio_test_hugetlb().
Link: https://lkml.kernel.org/r/20230327151050.1787744-1-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Leonardo Bras has noticed that pcp charge cache draining might be
disruptive on workloads relying on 'isolated cpus', a feature commonly
used on workloads that are sensitive to interruption and context switching
such as vRAN and Industrial Control Systems.
There are essentially two ways how to approach the issue. We can either
allow the pcp cache to be drained on a different rather than a local cpu
or avoid remote flushing on isolated cpus.
The current pcp charge cache is really optimized for high performance and
it always relies to stick with its cpu. That means it only requires
local_lock (preempt_disable on !RT) and draining is handed over to pcp WQ
to drain locally again.
The former solution (remote draining) would require to add an additional
locking to prevent local charges from racing with the draining. This adds
an atomic operation to otherwise simple arithmetic fast path in the
try_charge path. Another concern is that the remote draining can cause a
lock contention for the isolated workloads and therefore interfere with it
indirectly via user space interfaces.
Another option is to avoid draining scheduling on isolated cpus
altogether. That means that those remote cpus would keep their charges
even after drain_all_stock returns. This is certainly not optimal either
but it shouldn't really cause any major problems. In the worst case (many
isolated cpus with charges - each of them with MEMCG_CHARGE_BATCH i.e 64
page) the memory consumption of a memcg would be artificially higher than
can be immediately used from other cpus.
Theoretically a memcg OOM killer could be triggered pre-maturely.
Currently it is not really clear whether this is a practical problem
though. Tight memcg limit would be really counter productive to cpu
isolated workloads pretty much by definition because any memory reclaimed
induced by memcg limit could break user space timing expectations as those
usually expect execution in the userspace most of the time.
Also charges could be left behind on memcg removal. Any future charge on
those isolated cpus will drain that pcp cache so this won't be a permanent
leak.
Considering cons and pros of both approaches this patch is implementing
the second option and simply do not schedule remote draining if the target
cpu is isolated. This solution is much more simpler. It doesn't add any
new locking and it is more more predictable from the user space POV.
Should the pre-mature memcg OOM become a real life problem, we can revisit
this decision.
[akpm@linux-foundation.org: memcontrol.c needs sched/isolation.h]
Link: https://lore.kernel.org/oe-kbuild-all/202303180617.7E3aIlHf-lkp@intel.com/
Link: https://lkml.kernel.org/r/20230317134448.11082-3-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Suggested-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Reported-by: Leonardo Bras <leobras@redhat.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The current implementation of the compaction loop fails to set the source
zspage pointer to NULL in all cases, leading to a potential issue where
__zs_compact() could use a stale zspage pointer. This pointer could even
point to a previously freed zspage, causing unexpected behavior in the
putback_zspage() and migrate_write_unlock() functions after returning from
the compaction loop.
Address the issue by ensuring that the source zspage pointer is always set
to NULL when it should be.
Link: https://lkml.kernel.org/r/20230417130850.1784777-1-senozhatsky@chromium.org
Fixes: 5a845e9f2d ("zsmalloc: rework compaction algorithm")
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reported-by: Yu Zhao <yuzhao@google.com>
Tested-by: Yu Zhao <yuzhao@google.com>
Reviewed-by: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
clang produces a build failure on x86 for some randconfig builds after a
change that moves around code to mm/mm_init.c:
Cannot find symbol for section 2: .text.
mm/mm_init.o: failed
I have not been able to figure out why this happens, but the __weak
annotation on arch_has_descending_max_zone_pfns() is the trigger here.
Removing the weak function in favor of an open-coded Kconfig option check
avoids the problem and becomes clearer as well as better to optimize by
the compiler.
[arnd@arndb.de: fix logic bug]
Link: https://lkml.kernel.org/r/20230415081904.969049-1-arnd@kernel.org
Link: https://lkml.kernel.org/r/20230414080418.110236-1-arnd@kernel.org
Fixes: 9420f89db2 ("mm: move most of core MM initialization to mm/mm_init.c")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: SeongJae Park <sj@kernel.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
23baf831a3 ("mm, treewide: redefine MAX_ORDER sanely") results in
various boot failures (hang) on arm targets Debug messages reveal the
reason.
########### MAX_ORDER=10 start=0 __ffs(start)=-1 min()=10 min_t=-1
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
If start==0, __ffs(start) returns 0xfffffff or (as int) -1, which min_t()
interprets as such, while min() apparently uses the returned unsigned long
value. Obviously a negative order isn't received well by the rest of the
code.
[akpm@linux-foundation.org: fix comment, per Mike]
Link: https://lkml.kernel.org/r/ZDBa7HWZK69dKKzH@kernel.org
Link: https://lkml.kernel.org/r/20230406072529.vupqyrzqnhyozeyh@box.shutemov.name
Fixes: 23baf831a3 ("mm, treewide: redefine MAX_ORDER sanely")
Signed-off-by: "Kirill A. Shutemov" <kirill@shutemov.name>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lkml.kernel.org/r/9460377a-38aa-4f39-ad57-fb73725f92db@roeck-us.net
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
A bug was reported by Yuanxi Liu where allocating 1G pages at runtime is
taking an excessive amount of time for large amounts of memory. Further
testing allocating huge pages that the cost is linear i.e. if allocating
1G pages in batches of 10 then the time to allocate nr_hugepages from
10->20->30->etc increases linearly even though 10 pages are allocated at
each step. Profiles indicated that much of the time is spent checking the
validity within already existing huge pages and then attempting a
migration that fails after isolating the range, draining pages and a whole
lot of other useless work.
Commit eb14d4eefd ("mm,page_alloc: drop unnecessary checks from
pfn_range_valid_contig") removed two checks, one which ignored huge pages
for contiguous allocations as huge pages can sometimes migrate. While
there may be value on migrating a 2M page to satisfy a 1G allocation, it's
potentially expensive if the 1G allocation fails and it's pointless to try
moving a 1G page for a new 1G allocation or scan the tail pages for valid
PFNs.
Reintroduce the PageHuge check and assume any contiguous region with
hugetlbfs pages is unsuitable for a new 1G allocation.
The hpagealloc test allocates huge pages in batches and reports the
average latency per page over time. This test happens just after boot
when fragmentation is not an issue. Units are in milliseconds.
hpagealloc
6.3.0-rc6 6.3.0-rc6 6.3.0-rc6
vanilla hugeallocrevert-v1r1 hugeallocsimple-v1r2
Min Latency 26.42 ( 0.00%) 5.07 ( 80.82%) 18.94 ( 28.30%)
1st-qrtle Latency 356.61 ( 0.00%) 5.34 ( 98.50%) 19.85 ( 94.43%)
2nd-qrtle Latency 697.26 ( 0.00%) 5.47 ( 99.22%) 20.44 ( 97.07%)
3rd-qrtle Latency 972.94 ( 0.00%) 5.50 ( 99.43%) 20.81 ( 97.86%)
Max-1 Latency 26.42 ( 0.00%) 5.07 ( 80.82%) 18.94 ( 28.30%)
Max-5 Latency 82.14 ( 0.00%) 5.11 ( 93.78%) 19.31 ( 76.49%)
Max-10 Latency 150.54 ( 0.00%) 5.20 ( 96.55%) 19.43 ( 87.09%)
Max-90 Latency 1164.45 ( 0.00%) 5.53 ( 99.52%) 20.97 ( 98.20%)
Max-95 Latency 1223.06 ( 0.00%) 5.55 ( 99.55%) 21.06 ( 98.28%)
Max-99 Latency 1278.67 ( 0.00%) 5.57 ( 99.56%) 22.56 ( 98.24%)
Max Latency 1310.90 ( 0.00%) 8.06 ( 99.39%) 26.62 ( 97.97%)
Amean Latency 678.36 ( 0.00%) 5.44 * 99.20%* 20.44 * 96.99%*
6.3.0-rc6 6.3.0-rc6 6.3.0-rc6
vanilla revert-v1 hugeallocfix-v2
Duration User 0.28 0.27 0.30
Duration System 808.66 17.77 35.99
Duration Elapsed 830.87 18.08 36.33
The vanilla kernel is poor, taking up to 1.3 second to allocate a huge
page and almost 10 minutes in total to run the test. Reverting the
problematic commit reduces it to 8ms at worst and the patch takes 26ms.
This patch fixes the main issue with skipping huge pages but leaves the
page_count() out because a page with an elevated count potentially can
migrate.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=217022
Link: https://lkml.kernel.org/r/20230414141429.pwgieuwluxwez3rj@techsingularity.net
Fixes: eb14d4eefd ("mm,page_alloc: drop unnecessary checks from pfn_range_valid_contig")
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Reported-by: Yuanxi Liu <y.liu@naruida.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The maple tree limits the gap returned to a window that specifically fits
what was asked. This may not be optimal in the case of switching search
directions or a gap that does not satisfy the requested space for other
reasons. Fix the search by retrying the operation and limiting the search
window in the rare occasion that a conflict occurs.
Link: https://lkml.kernel.org/r/20230414185919.4175572-1-Liam.Howlett@oracle.com
Fixes: 3499a13168 ("mm/mmap: use maple tree for unmapped_area{_topdown}")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reported-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Similarly to kmsan_vmap_pages_range_noflush(), kmsan_ioremap_page_range()
must also properly handle allocation/mapping failures. In the case of
such, it must clean up the already created metadata mappings and return an
error code, so that the error can be propagated to ioremap_page_range().
Without doing so, KMSAN may silently fail to bring the metadata for the
page range into a consistent state, which will result in user-visible
crashes when trying to access them.
Link: https://lkml.kernel.org/r/20230413131223.4135168-2-glider@google.com
Fixes: b073d7f8ae ("mm: kmsan: maintain KMSAN metadata for page operations")
Signed-off-by: Alexander Potapenko <glider@google.com>
Reported-by: Dipanjan Das <mail.dipanjan.das@gmail.com>
Link: https://lore.kernel.org/linux-mm/CANX2M5ZRrRA64k0hOif02TjmY9kbbO2aCBPyq79es34RXZ=cAw@mail.gmail.com/
Reviewed-by: Marco Elver <elver@google.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
As reported by Dipanjan Das, when KMSAN is used together with kernel fault
injection (or, generally, even without the latter), calls to kcalloc() or
__vmap_pages_range_noflush() may fail, leaving the metadata mappings for
the virtual mapping in an inconsistent state. When these metadata
mappings are accessed later, the kernel crashes.
To address the problem, we return a non-zero error code from
kmsan_vmap_pages_range_noflush() in the case of any allocation/mapping
failure inside it, and make vmap_pages_range_noflush() return an error if
KMSAN fails to allocate the metadata.
This patch also removes KMSAN_WARN_ON() from vmap_pages_range_noflush(),
as these allocation failures are not fatal anymore.
Link: https://lkml.kernel.org/r/20230413131223.4135168-1-glider@google.com
Fixes: b073d7f8ae ("mm: kmsan: maintain KMSAN metadata for page operations")
Signed-off-by: Alexander Potapenko <glider@google.com>
Reported-by: Dipanjan Das <mail.dipanjan.das@gmail.com>
Link: https://lore.kernel.org/linux-mm/CANX2M5ZRrRA64k0hOif02TjmY9kbbO2aCBPyq79es34RXZ=cAw@mail.gmail.com/
Reviewed-by: Marco Elver <elver@google.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
syzbot is reporting circular locking dependency which involves
zonelist_update_seq seqlock [1], for this lock is checked by memory
allocation requests which do not need to be retried.
One deadlock scenario is kmalloc(GFP_ATOMIC) from an interrupt handler.
CPU0
----
__build_all_zonelists() {
write_seqlock(&zonelist_update_seq); // makes zonelist_update_seq.seqcount odd
// e.g. timer interrupt handler runs at this moment
some_timer_func() {
kmalloc(GFP_ATOMIC) {
__alloc_pages_slowpath() {
read_seqbegin(&zonelist_update_seq) {
// spins forever because zonelist_update_seq.seqcount is odd
}
}
}
}
// e.g. timer interrupt handler finishes
write_sequnlock(&zonelist_update_seq); // makes zonelist_update_seq.seqcount even
}
This deadlock scenario can be easily eliminated by not calling
read_seqbegin(&zonelist_update_seq) from !__GFP_DIRECT_RECLAIM allocation
requests, for retry is applicable to only __GFP_DIRECT_RECLAIM allocation
requests. But Michal Hocko does not know whether we should go with this
approach.
Another deadlock scenario which syzbot is reporting is a race between
kmalloc(GFP_ATOMIC) from tty_insert_flip_string_and_push_buffer() with
port->lock held and printk() from __build_all_zonelists() with
zonelist_update_seq held.
CPU0 CPU1
---- ----
pty_write() {
tty_insert_flip_string_and_push_buffer() {
__build_all_zonelists() {
write_seqlock(&zonelist_update_seq);
build_zonelists() {
printk() {
vprintk() {
vprintk_default() {
vprintk_emit() {
console_unlock() {
console_flush_all() {
console_emit_next_record() {
con->write() = serial8250_console_write() {
spin_lock_irqsave(&port->lock, flags);
tty_insert_flip_string() {
tty_insert_flip_string_fixed_flag() {
__tty_buffer_request_room() {
tty_buffer_alloc() {
kmalloc(GFP_ATOMIC | __GFP_NOWARN) {
__alloc_pages_slowpath() {
zonelist_iter_begin() {
read_seqbegin(&zonelist_update_seq); // spins forever because zonelist_update_seq.seqcount is odd
spin_lock_irqsave(&port->lock, flags); // spins forever because port->lock is held
}
}
}
}
}
}
}
}
spin_unlock_irqrestore(&port->lock, flags);
// message is printed to console
spin_unlock_irqrestore(&port->lock, flags);
}
}
}
}
}
}
}
}
}
write_sequnlock(&zonelist_update_seq);
}
}
}
This deadlock scenario can be eliminated by
preventing interrupt context from calling kmalloc(GFP_ATOMIC)
and
preventing printk() from calling console_flush_all()
while zonelist_update_seq.seqcount is odd.
Since Petr Mladek thinks that __build_all_zonelists() can become a
candidate for deferring printk() [2], let's address this problem by
disabling local interrupts in order to avoid kmalloc(GFP_ATOMIC)
and
disabling synchronous printk() in order to avoid console_flush_all()
.
As a side effect of minimizing duration of zonelist_update_seq.seqcount
being odd by disabling synchronous printk(), latency at
read_seqbegin(&zonelist_update_seq) for both !__GFP_DIRECT_RECLAIM and
__GFP_DIRECT_RECLAIM allocation requests will be reduced. Although, from
lockdep perspective, not calling read_seqbegin(&zonelist_update_seq) (i.e.
do not record unnecessary locking dependency) from interrupt context is
still preferable, even if we don't allow calling kmalloc(GFP_ATOMIC)
inside
write_seqlock(&zonelist_update_seq)/write_sequnlock(&zonelist_update_seq)
section...
Link: https://lkml.kernel.org/r/8796b95c-3da3-5885-fddd-6ef55f30e4d3@I-love.SAKURA.ne.jp
Fixes: 3d36424b3b ("mm/page_alloc: fix race condition between build_all_zonelists and page allocation")
Link: https://lkml.kernel.org/r/ZCrs+1cDqPWTDFNM@alley [2]
Reported-by: syzbot <syzbot+223c7461c58c58a4cb10@syzkaller.appspotmail.com>
Link: https://syzkaller.appspot.com/bug?extid=223c7461c58c58a4cb10 [1]
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Petr Mladek <pmladek@suse.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Patrick Daly <quic_pdaly@quicinc.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
KASAN report null-ptr-deref:
==================================================================
BUG: KASAN: null-ptr-deref in bdi_split_work_to_wbs+0x5c5/0x7b0
Write of size 8 at addr 0000000000000000 by task sync/943
CPU: 5 PID: 943 Comm: sync Tainted: 6.3.0-rc5-next-20230406-dirty #461
Call Trace:
<TASK>
dump_stack_lvl+0x7f/0xc0
print_report+0x2ba/0x340
kasan_report+0xc4/0x120
kasan_check_range+0x1b7/0x2e0
__kasan_check_write+0x24/0x40
bdi_split_work_to_wbs+0x5c5/0x7b0
sync_inodes_sb+0x195/0x630
sync_inodes_one_sb+0x3a/0x50
iterate_supers+0x106/0x1b0
ksys_sync+0x98/0x160
[...]
==================================================================
The race that causes the above issue is as follows:
cpu1 cpu2
-------------------------|-------------------------
inode_switch_wbs
INIT_WORK(&isw->work, inode_switch_wbs_work_fn)
queue_rcu_work(isw_wq, &isw->work)
// queue_work async
inode_switch_wbs_work_fn
wb_put_many(old_wb, nr_switched)
percpu_ref_put_many
ref->data->release(ref)
cgwb_release
queue_work(cgwb_release_wq, &wb->release_work)
// queue_work async
&wb->release_work
cgwb_release_workfn
ksys_sync
iterate_supers
sync_inodes_one_sb
sync_inodes_sb
bdi_split_work_to_wbs
kmalloc(sizeof(*work), GFP_ATOMIC)
// alloc memory failed
percpu_ref_exit
ref->data = NULL
kfree(data)
wb_get(wb)
percpu_ref_get(&wb->refcnt)
percpu_ref_get_many(ref, 1)
atomic_long_add(nr, &ref->data->count)
atomic64_add(i, v)
// trigger null-ptr-deref
bdi_split_work_to_wbs() traverses &bdi->wb_list to split work into all
wbs. If the allocation of new work fails, the on-stack fallback will be
used and the reference count of the current wb is increased afterwards.
If cgroup writeback membership switches occur before getting the reference
count and the current wb is released as old_wd, then calling wb_get() or
wb_put() will trigger the null pointer dereference above.
This issue was introduced in v4.3-rc7 (see fix tag1). Both
sync_inodes_sb() and __writeback_inodes_sb_nr() calls to
bdi_split_work_to_wbs() can trigger this issue. For scenarios called via
sync_inodes_sb(), originally commit 7fc5854f8c ("writeback: synchronize
sync(2) against cgroup writeback membership switches") reduced the
possibility of the issue by adding wb_switch_rwsem, but in v5.14-rc1 (see
fix tag2) removed the "inode_io_list_del_locked(inode, old_wb)" from
inode_switch_wbs_work_fn() so that wb->state contains WB_has_dirty_io,
thus old_wb is not skipped when traversing wbs in bdi_split_work_to_wbs(),
and the issue becomes easily reproducible again.
To solve this problem, percpu_ref_exit() is called under RCU protection to
avoid race between cgwb_release_workfn() and bdi_split_work_to_wbs().
Moreover, replace wb_get() with wb_tryget() in bdi_split_work_to_wbs(),
and skip the current wb if wb_tryget() fails because the wb has already
been shutdown.
Link: https://lkml.kernel.org/r/20230410130826.1492525-1-libaokun1@huawei.com
Fixes: b817525a4a ("writeback: bdi_writeback iteration must not skip dying ones")
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Hou Tao <houtao1@huawei.com>
Cc: yangerkun <yangerkun@huawei.com>
Cc: Zhang Yi <yi.zhang@huawei.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
set_mempolicy_home_node() iterates over a list of VMAs and calls
mbind_range() on each VMA, which also iterates over the singular list of
the VMA passed in and potentially splits the VMA. Since the VMA iterator
is not passed through, set_mempolicy_home_node() may now point to a stale
node in the VMA tree. This can result in a UAF as reported by syzbot.
Avoid the stale maple tree node by passing the VMA iterator through to the
underlying call to split_vma().
mbind_range() is also overly complicated, since there are two calling
functions and one already handles iterating over the VMAs. Simplify
mbind_range() to only handle merging and splitting of the VMAs.
Align the new loop in do_mbind() and existing loop in
set_mempolicy_home_node() to use the reduced mbind_range() function. This
allows for a single location of the range calculation and avoids
constantly looking up the previous VMA (since this is a loop over the
VMAs).
Link: https://lore.kernel.org/linux-mm/000000000000c93feb05f87e24ad@google.com/
Fixes: 66850be55e ("mm/mempolicy: use vma iterator & maple state instead of vma linked list")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reported-by: syzbot+a7c1ec5b1d71ceaa5186@syzkaller.appspotmail.com
Link: https://lkml.kernel.org/r/20230410152205.2294819-1-Liam.Howlett@oracle.com
Tested-by: syzbot+a7c1ec5b1d71ceaa5186@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
split_huge_page_to_list() WARNs when called for huge zero pages, which
sounds to me too harsh because it does not imply a kernel bug, but just
notifies the event to admins. On the other hand, this is considered as
critical by syzkaller and makes its testing less efficient, which seems to
me harmful.
So replace the VM_WARN_ON_ONCE_FOLIO with pr_warn_ratelimited.
Link: https://lkml.kernel.org/r/20230406082004.2185420-1-naoya.horiguchi@linux.dev
Fixes: 478d134e95 ("mm/huge_memory: do not overkill when splitting huge_zero_page")
Signed-off-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Reported-by: syzbot+07a218429c8d19b1fb25@syzkaller.appspotmail.com
Link: https://lore.kernel.org/lkml/000000000000a6f34a05e6efcd01@google.com/
Reviewed-by: Yang Shi <shy828301@gmail.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Cc: Xu Yu <xuyu@linux.alibaba.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When the loop over the VMA is terminated early due to an error, the return
code could be overwritten with ENOMEM. Fix the return code by only
setting the error on early loop termination when the error is not set.
User-visible effects include: attempts to run mprotect() against a
special mapping or with a poorly-aligned hugetlb address should return
-EINVAL, but they presently return -ENOMEM. In other cases an -EACCESS
should be returned.
Link: https://lkml.kernel.org/r/20230406193050.1363476-1-Liam.Howlett@oracle.com
Fixes: 2286a6914c ("mm: change mprotect_fixup to vma iterator")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Khugepaged collapse an anonymous thp in two rounds of scans. The 2nd
round done in __collapse_huge_page_isolate() after
hpage_collapse_scan_pmd(), during which all the locks will be released
temporarily. It means the pgtable can change during this phase before 2nd
round starts.
It's logically possible some ptes got wr-protected during this phase, and
we can errornously collapse a thp without noticing some ptes are
wr-protected by userfault. e1e267c792 wanted to avoid it but it only
did that for the 1st phase, not the 2nd phase.
Since __collapse_huge_page_isolate() happens after a round of small page
swapins, we don't need to worry on any !present ptes - if it existed
khugepaged will already bail out. So we only need to check present ptes
with uffd-wp bit set there.
This is something I found only but never had a reproducer, I thought it
was one caused a bug in Muhammad's recent pagemap new ioctl work, but it
turns out it's not the cause of that but an userspace bug. However this
seems to still be a real bug even with a very small race window, still
worth to have it fixed and copy stable.
Link: https://lkml.kernel.org/r/20230405155120.3608140-1-peterx@redhat.com
Fixes: e1e267c792 ("khugepaged: skip collapse if uffd-wp detected")
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Looks like what we fixed for hugetlb in commit 44f86392bd ("mm/hugetlb:
fix uffd-wp handling for migration entries in
hugetlb_change_protection()") similarly applies to THP.
Setting/clearing uffd-wp on THP migration entries is not implemented
properly. Further, while removing migration PMDs considers the uffd-wp
bit, inserting migration PMDs does not consider the uffd-wp bit.
We have to set/clear independently of the migration entry type in
change_huge_pmd() and properly copy the uffd-wp bit in
set_pmd_migration_entry().
Verified using a simple reproducer that triggers migration of a THP, that
the set_pmd_migration_entry() no longer loses the uffd-wp bit.
Link: https://lkml.kernel.org/r/20230405160236.587705-2-david@redhat.com
Fixes: f45ec5ff16 ("userfaultfd: wp: support swap and page migration")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Cc: <stable@vger.kernel.org>
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The ->percpu_pvec_drained was originally introduced by commit d9ed0d08b6
("mm: only drain per-cpu pagevecs once per pagevec usage") to drain
per-cpu pagevecs only once per pagevec usage. But after converting the
swap code to be more folio-based, the commit c2bc16817a ("mm/swap: add
folio_batch_move_lru()") breaks this logic, which would cause
->percpu_pvec_drained to be reset to false, that means per-cpu pagevecs
will be drained multiple times per pagevec usage.
In theory, there should be no functional changes when converting code to
be more folio-based. We should call folio_batch_reinit() in
folio_batch_move_lru() instead of folio_batch_init(). And to verify that
we still need ->percpu_pvec_drained, I ran mmtests/sparsetruncate-tiny and
got the following data:
baseline with
baseline/ patch/
Min Time 326.00 ( 0.00%) 328.00 ( -0.61%)
1st-qrtle Time 334.00 ( 0.00%) 336.00 ( -0.60%)
2nd-qrtle Time 338.00 ( 0.00%) 341.00 ( -0.89%)
3rd-qrtle Time 343.00 ( 0.00%) 347.00 ( -1.17%)
Max-1 Time 326.00 ( 0.00%) 328.00 ( -0.61%)
Max-5 Time 327.00 ( 0.00%) 330.00 ( -0.92%)
Max-10 Time 328.00 ( 0.00%) 331.00 ( -0.91%)
Max-90 Time 350.00 ( 0.00%) 357.00 ( -2.00%)
Max-95 Time 395.00 ( 0.00%) 390.00 ( 1.27%)
Max-99 Time 508.00 ( 0.00%) 434.00 ( 14.57%)
Max Time 547.00 ( 0.00%) 476.00 ( 12.98%)
Amean Time 344.61 ( 0.00%) 345.56 * -0.28%*
Stddev Time 30.34 ( 0.00%) 19.51 ( 35.69%)
CoeffVar Time 8.81 ( 0.00%) 5.65 ( 35.87%)
BAmean-99 Time 342.38 ( 0.00%) 344.27 ( -0.55%)
BAmean-95 Time 338.58 ( 0.00%) 341.87 ( -0.97%)
BAmean-90 Time 336.89 ( 0.00%) 340.26 ( -1.00%)
BAmean-75 Time 335.18 ( 0.00%) 338.40 ( -0.96%)
BAmean-50 Time 332.54 ( 0.00%) 335.42 ( -0.87%)
BAmean-25 Time 329.30 ( 0.00%) 332.00 ( -0.82%)
From the above it can be seen that we get similar data to when
->percpu_pvec_drained was introduced, so we still need it. Let's call
folio_batch_reinit() in folio_batch_move_lru() to restore the original
logic.
Link: https://lkml.kernel.org/r/20230405161854.6931-1-zhengqi.arch@bytedance.com
Fixes: c2bc16817a ("mm/swap: add folio_batch_move_lru()")
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZDhSiwAKCRDbK58LschI
g8cbAQCH4xrquOeDmYyGXFQGchHZAIj++tKg8ABU4+hYeJtrlwEA6D4W6wjoSZRk
mLSptZ9qro8yZA86BvyPvlBT1h9ELQA=
=StAc
-----END PGP SIGNATURE-----
Daniel Borkmann says:
====================
pull-request: bpf-next 2023-04-13
We've added 260 non-merge commits during the last 36 day(s) which contain
a total of 356 files changed, 21786 insertions(+), 11275 deletions(-).
The main changes are:
1) Rework BPF verifier log behavior and implement it as a rotating log
by default with the option to retain old-style fixed log behavior,
from Andrii Nakryiko.
2) Adds support for using {FOU,GUE} encap with an ipip device operating
in collect_md mode and add a set of BPF kfuncs for controlling encap
params, from Christian Ehrig.
3) Allow BPF programs to detect at load time whether a particular kfunc
exists or not, and also add support for this in light skeleton,
from Alexei Starovoitov.
4) Optimize hashmap lookups when key size is multiple of 4,
from Anton Protopopov.
5) Enable RCU semantics for task BPF kptrs and allow referenced kptr
tasks to be stored in BPF maps, from David Vernet.
6) Add support for stashing local BPF kptr into a map value via
bpf_kptr_xchg(). This is useful e.g. for rbtree node creation
for new cgroups, from Dave Marchevsky.
7) Fix BTF handling of is_int_ptr to skip modifiers to work around
tracing issues where a program cannot be attached, from Feng Zhou.
8) Migrate a big portion of test_verifier unit tests over to
test_progs -a verifier_* via inline asm to ease {read,debug}ability,
from Eduard Zingerman.
9) Several updates to the instruction-set.rst documentation
which is subject to future IETF standardization
(https://lwn.net/Articles/926882/), from Dave Thaler.
10) Fix BPF verifier in the __reg_bound_offset's 64->32 tnum sub-register
known bits information propagation, from Daniel Borkmann.
11) Add skb bitfield compaction work related to BPF with the overall goal
to make more of the sk_buff bits optional, from Jakub Kicinski.
12) BPF selftest cleanups for build id extraction which stand on its own
from the upcoming integration work of build id into struct file object,
from Jiri Olsa.
13) Add fixes and optimizations for xsk descriptor validation and several
selftest improvements for xsk sockets, from Kal Conley.
14) Add BPF links for struct_ops and enable switching implementations
of BPF TCP cong-ctls under a given name by replacing backing
struct_ops map, from Kui-Feng Lee.
15) Remove a misleading BPF verifier env->bypass_spec_v1 check on variable
offset stack read as earlier Spectre checks cover this,
from Luis Gerhorst.
16) Fix issues in copy_from_user_nofault() for BPF and other tracers
to resemble copy_from_user_nmi() from safety PoV, from Florian Lehner
and Alexei Starovoitov.
17) Add --json-summary option to test_progs in order for CI tooling to
ease parsing of test results, from Manu Bretelle.
18) Batch of improvements and refactoring to prep for upcoming
bpf_local_storage conversion to bpf_mem_cache_{alloc,free} allocator,
from Martin KaFai Lau.
19) Improve bpftool's visual program dump which produces the control
flow graph in a DOT format by adding C source inline annotations,
from Quentin Monnet.
20) Fix attaching fentry/fexit/fmod_ret/lsm to modules by extracting
the module name from BTF of the target and searching kallsyms of
the correct module, from Viktor Malik.
21) Improve BPF verifier handling of '<const> <cond> <non_const>'
to better detect whether in particular jmp32 branches are taken,
from Yonghong Song.
22) Allow BPF TCP cong-ctls to write app_limited of struct tcp_sock.
A built-in cc or one from a kernel module is already able to write
to app_limited, from Yixin Shen.
Conflicts:
Documentation/bpf/bpf_devel_QA.rst
b7abcd9c65 ("bpf, doc: Link to submitting-patches.rst for general patch submission info")
0f10f647f4 ("bpf, docs: Use internal linking for link to netdev subsystem doc")
https://lore.kernel.org/all/20230307095812.236eb1be@canb.auug.org.au/
include/net/ip_tunnels.h
bc9d003dc4 ("ip_tunnel: Preserve pointer const in ip_tunnel_info_opts")
ac931d4cde ("ipip,ip_tunnel,sit: Add FOU support for externally controlled ipip devices")
https://lore.kernel.org/all/20230413161235.4093777-1-broonie@kernel.org/
net/bpf/test_run.c
e5995bc7e2 ("bpf, test_run: fix crashes due to XDP frame overwriting/corruption")
294635a816 ("bpf, test_run: fix &xdp_frame misplacement for LIVE_FRAMES")
https://lore.kernel.org/all/20230320102619.05b80a98@canb.auug.org.au/
====================
Link: https://lore.kernel.org/r/20230413191525.7295-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since commit 8b41fc4454 ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations
are used to identify modules. As a consequence, uses of the macro
in non-modules will cause modprobe to misidentify their containing
object file as a module when it is not (false positives), and modprobe
might succeed rather than failing with a suitable error message.
So remove it in the files in this commit, none of which can be built as
modules.
Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Suggested-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: linux-modules@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Hitomi Hasegawa <hasegawa-hitomi@fujitsu.com>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-mm@kvack.org
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Since commit 8b41fc4454 ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations
are used to identify modules. As a consequence, uses of the macro
in non-modules will cause modprobe to misidentify their containing
object file as a module when it is not (false positives), and modprobe
might succeed rather than failing with a suitable error message.
So remove it in the files in this commit, none of which can be built as
modules.
Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Suggested-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: linux-modules@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Hitomi Hasegawa <hasegawa-hitomi@fujitsu.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-mm@kvack.org
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Without CONFIG_SYSCTL, the compiler warns about a few unused functions:
mm/compaction.c:3076:12: error: 'proc_dointvec_minmax_warn_RT_change' defined but not used [-Werror=unused-function]
mm/compaction.c:2780:12: error: 'sysctl_compaction_handler' defined but not used [-Werror=unused-function]
mm/compaction.c:2750:12: error: 'compaction_proactiveness_sysctl_handler' defined but not used [-Werror=unused-function]
The #ifdef is actually not necessary here, as the alternative
register_sysctl_init() stub function does not use its argument, which
lets the compiler drop the rest implicitly, while avoiding the warning.
Fixes: c521126610c3 ("mm: compaction: move compaction sysctl to its own file")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
This moves all compaction sysctls to its own file.
Move sysctl to where the functionality truly belongs to improve
readability, reduce merge conflicts, and facilitate maintenance.
I use x86_defconfig and linux-next-20230327 branch
$ make defconfig;make all -jn
CONFIG_COMPACTION=y
add/remove: 1/0 grow/shrink: 1/1 up/down: 350/-256 (94)
Function old new delta
vm_compaction - 320 +320
kcompactd_init 180 210 +30
vm_table 2112 1856 -256
Total: Before=21119987, After=21120081, chg +0.00%
Despite the addition of 94 bytes the patch still seems a worthwile
cleanup.
Link: https://lore.kernel.org/lkml/067f7347-ba10-5405-920c-0f5f985c84f4@suse.cz/
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
The sysctl_memory_failure_early_kill and memory_failure_recovery
are only used in memory-failure.c, move them to its own file.
Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
[mcgrof: fix by adding empty ctl entry, this caused a crash]
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
There are several issues with copy_from_user_nofault():
- access_ok() is designed for user context only and for that reason
it has WARN_ON_IN_IRQ() which triggers when bpf, kprobe, eprobe
and perf on ppc are calling it from irq.
- it's missing nmi_uaccess_okay() which is a nop on all architectures
except x86 where it's required.
The comment in arch/x86/mm/tlb.c explains the details why it's necessary.
Calling copy_from_user_nofault() from bpf, [ke]probe without this check is not safe.
- __copy_from_user_inatomic() under CONFIG_HARDENED_USERCOPY is calling
check_object_size()->__check_object_size()->check_heap_object()->find_vmap_area()->spin_lock()
which is not safe to do from bpf, [ke]probe and perf due to potential deadlock.
Fix all three issues. At the end the copy_from_user_nofault() becomes
equivalent to copy_from_user_nmi() from safety point of view with
a difference in the return value.
Reported-by: Hsin-Wei Hung <hsinweih@uci.edu>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Florian Lehner <dev@der-flo.net>
Tested-by: Hsin-Wei Hung <hsinweih@uci.edu>
Tested-by: Florian Lehner <dev@der-flo.net>
Link: https://lore.kernel.org/r/20230410174345.4376-2-dev@der-flo.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
gcc inlines kstrdup into kstrdup_const() but it can very efficiently tail
call into it instead:
$ ./scripts/bloat-o-meter ../vmlinux-000 ../obj/vmlinux
add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-84 (-84)
Function old new delta
kstrdup_const 119 35 -84
Link: https://lkml.kernel.org/r/Y/4fDlbIhTLNLFHz@p183
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This particular combination of flags is used by most filesystems
in their ->write_begin method, although it does find use in a
few other places. Before folios, it warranted its own function
(grab_cache_page_write_begin()), but I think that just having specialised
flags is enough. It certainly helps the few places that have been
converted from grab_cache_page_write_begin() to __filemap_get_folio().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://lore.kernel.org/r/20230324180129.1220691-2-willy@infradead.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
During Numa scanning make sure only relevant vmas of the tasks are
scanned.
Before:
All the tasks of a process participate in scanning the vma even if they
do not access vma in it's lifespan.
Now:
Except cases of first few unconditional scans, if a process do
not touch vma (exluding false positive cases of PID collisions)
tasks no longer scan all vma
Logic used:
1) 6 bits of PID used to mark active bit in vma numab status during
fault to remember PIDs accessing vma. (Thanks Mel)
2) Subsequently in scan path, vma scanning is skipped if current PID
had not accessed vma.
3) First two times we do allow unconditional scan to preserve earlier
behaviour of scanning.
Acknowledgement to Bharata B Rao <bharata@amd.com> for initial patch to
store pid information and Peter Zijlstra <peterz@infradead.org> (Usage of
test and set bit)
Link: https://lkml.kernel.org/r/092f03105c7c1d3450f4636b1ea350407f07640e.1677672277.git.raghavendra.kt@amd.com
Signed-off-by: Raghavendra K T <raghavendra.kt@amd.com>
Suggested-by: Mel Gorman <mgorman@techsingularity.net>
Cc: David Hildenbrand <david@redhat.com>
Cc: Disha Talreja <dishaa.talreja@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mike Rapoport <rppt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
call_rcu() can take a long time when callback offloading is enabled. Its
use in the vm_area_free can cause regressions in the exit path when
multiple VMAs are being freed.
Because exit_mmap() is called only after the last mm user drops its
refcount, the page fault handlers can't be racing with it. Any other
possible user like oom-reaper or process_mrelease are already synchronized
using mmap_lock. Therefore exit_mmap() can free VMAs directly, without
the use of call_rcu().
Expose __vm_area_free() and use it from exit_mmap() to avoid possible
call_rcu() floods and performance regressions caused by it.
Link: https://lkml.kernel.org/r/20230227173632.3292573-33-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add a new CONFIG_PER_VMA_LOCK_STATS config option to dump extra statistics
about handling page fault under VMA lock.
Link: https://lkml.kernel.org/r/20230227173632.3292573-29-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Due to the possibility of handle_userfault dropping mmap_lock, avoid fault
handling under VMA lock and retry holding mmap_lock. This can be handled
more gracefully in the future.
Link: https://lkml.kernel.org/r/20230227173632.3292573-28-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Suggested-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Due to the possibility of do_swap_page dropping mmap_lock, abort fault
handling under VMA lock and retry holding mmap_lock. This can be handled
more gracefully in the future.
Link: https://lkml.kernel.org/r/20230227173632.3292573-27-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Laurent Dufour <laurent.dufour@fr.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When vma->anon_vma is not set, page fault handler will set it by either
reusing anon_vma of an adjacent VMA if VMAs are compatible or by
allocating a new one. find_mergeable_anon_vma() walks VMA tree to find a
compatible adjacent VMA and that requires not only the faulting VMA to be
stable but also the tree structure and other VMAs inside that tree.
Therefore locking just the faulting VMA is not enough for this search.
Fall back to taking mmap_lock when vma->anon_vma is not set. This
situation happens only on the first page fault and should not affect
overall performance.
Link: https://lkml.kernel.org/r/20230227173632.3292573-25-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Introduce lock_vma_under_rcu function to lookup and lock a VMA during page
fault handling. When VMA is not found, can't be locked or changes after
being locked, the function returns NULL. The lookup is performed under
RCU protection to prevent the found VMA from being destroyed before the
VMA lock is acquired. VMA lock statistics are updated according to the
results. For now only anonymous VMAs can be searched this way. In other
cases the function returns NULL.
Link: https://lkml.kernel.org/r/20230227173632.3292573-24-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Per-vma locking mechanism will search for VMA under RCU protection and
then after locking it, has to ensure it was not removed from the VMA tree
after we found it. To make this check efficient, introduce a
vma->detached flag to mark VMAs which were removed from the VMA tree.
Link: https://lkml.kernel.org/r/20230227173632.3292573-23-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Page fault handlers might need to fire MMU notifications while a new
notifier is being registered. Modify mm_take_all_locks to write-lock all
VMAs and prevent this race with page fault handlers that would hold VMA
locks. VMAs are locked before i_mmap_rwsem and anon_vma to keep the same
locking order as in page fault handlers.
Link: https://lkml.kernel.org/r/20230227173632.3292573-22-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Normally free_pgtables needs to lock affected VMAs except for the case
when VMAs were isolated under VMA write-lock. munmap() does just that,
isolating while holding appropriate locks and then downgrading mmap_lock
and dropping per-VMA locks before freeing page tables. Add a parameter to
free_pgtables for such scenario.
Link: https://lkml.kernel.org/r/20230227173632.3292573-20-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Write-lock VMA as locked before copying it and when copy_vma produces a
new VMA.
Link: https://lkml.kernel.org/r/20230227173632.3292573-18-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Laurent Dufour <laurent.dufour@fr.ibm.com>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Write-lock all VMAs which might be affected by a merge, split, expand or
shrink operations. All these operations use vma_prepare() before making
the modifications, therefore it provides a centralized place to perform
VMA locking.
[surenb@google.com: remove unnecessary vp->vma check in vma_prepare]
Link: https://lkml.kernel.org/r/20230301022720.1380780-1-surenb@google.com
Link: https://lore.kernel.org/r/202302281802.J93Nma7q-lkp@intel.com/
Link: https://lkml.kernel.org/r/20230227173632.3292573-17-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Laurent Dufour <laurent.dufour@fr.ibm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Protect VMA from concurrent page fault handler while collapsing a huge
page. Page fault handler needs a stable PMD to use PTL and relies on
per-VMA lock to prevent concurrent PMD changes. pmdp_collapse_flush(),
set_huge_pmd() and collapse_and_free_pmd() can modify a PMD, which will
not be detected by a page fault handler without proper locking.
Before this patch, page tables can be walked under any one of the
mmap_lock, the mapping lock, and the anon_vma lock; so when khugepaged
unlinks and frees page tables, it must ensure that all of those either are
locked or don't exist. This patch adds a fourth lock under which page
tables can be traversed, and so khugepaged must also lock out that one.
[surenb@google.com: vm_lock/i_mmap_rwsem inversion in retract_page_tables]
Link: https://lkml.kernel.org/r/20230303213250.3555716-1-surenb@google.com
[surenb@google.com: build fix]
Link: https://lkml.kernel.org/r/CAJuCfpFjWhtzRE1X=J+_JjgJzNKhq-=JT8yTBSTHthwp0pqWZw@mail.gmail.com
Link: https://lkml.kernel.org/r/20230227173632.3292573-16-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
vma_prepare() acquires all locks required before VMA modifications. Move
vma_prepare() before vma_adjust_trans_huge() so that VMA is locked before
any modification.
Link: https://lkml.kernel.org/r/20230227173632.3292573-15-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Introduce per-VMA locking. The lock implementation relies on a per-vma
and per-mm sequence counters to note exclusive locking:
- read lock - (implemented by vma_start_read) requires the vma
(vm_lock_seq) and mm (mm_lock_seq) sequence counters to differ.
If they match then there must be a vma exclusive lock held somewhere.
- read unlock - (implemented by vma_end_read) is a trivial vma->lock
unlock.
- write lock - (vma_start_write) requires the mmap_lock to be held
exclusively and the current mm counter is assigned to the vma counter.
This will allow multiple vmas to be locked under a single mmap_lock
write lock (e.g. during vma merging). The vma counter is modified
under exclusive vma lock.
- write unlock - (vma_end_write_all) is a batch release of all vma
locks held. It doesn't pair with a specific vma_start_write! It is
done before exclusive mmap_lock is released by incrementing mm
sequence counter (mm_lock_seq).
- write downgrade - if the mmap_lock is downgraded to the read lock, all
vma write locks are released as well (effectivelly same as write
unlock).
Link: https://lkml.kernel.org/r/20230227173632.3292573-13-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "Per-VMA locks", v4.
LWN article describing the feature: https://lwn.net/Articles/906852/
Per-vma locks idea that was discussed during SPF [1] discussion at LSF/MM
last year [2], which concluded with suggestion that “a reader/writer
semaphore could be put into the VMA itself; that would have the effect of
using the VMA as a sort of range lock. There would still be contention at
the VMA level, but it would be an improvement.” This patchset implements
this suggested approach.
When handling page faults we lookup the VMA that contains the faulting
page under RCU protection and try to acquire its lock. If that fails we
fall back to using mmap_lock, similar to how SPF handled this situation.
One notable way the implementation deviates from the proposal is the way
VMAs are read-locked. During some of mm updates, multiple VMAs need to be
locked until the end of the update (e.g. vma_merge, split_vma, etc).
Tracking all the locked VMAs, avoiding recursive locks, figuring out when
it's safe to unlock previously locked VMAs would make the code more
complex. So, instead of the usual lock/unlock pattern, the proposed
solution marks a VMA as locked and provides an efficient way to:
1. Identify locked VMAs.
2. Unlock all locked VMAs in bulk.
We also postpone unlocking the locked VMAs until the end of the update,
when we do mmap_write_unlock. Potentially this keeps a VMA locked for
longer than is absolutely necessary but it results in a big reduction of
code complexity.
Read-locking a VMA is done using two sequence numbers - one in the
vm_area_struct and one in the mm_struct. VMA is considered read-locked
when these sequence numbers are equal. To read-lock a VMA we set the
sequence number in vm_area_struct to be equal to the sequence number in
mm_struct. To unlock all VMAs we increment mm_struct's seq number. This
allows for an efficient way to track locked VMAs and to drop the locks on
all VMAs at the end of the update.
The patchset implements per-VMA locking only for anonymous pages which are
not in swap and avoids userfaultfs as their implementation is more
complex. Additional support for file-back page faults, swapped and user
pages can be added incrementally.
Performance benchmarks show similar although slightly smaller benefits as
with SPF patchset (~75% of SPF benefits). Still, with lower complexity
this approach might be more desirable.
Since RFC was posted in September 2022, two separate Google teams outside
of Android evaluated the patchset and confirmed positive results. Here
are the known usecases when per-VMA locks show benefits:
Android:
Apps with high number of threads (~100) launch times improve by up to 20%.
Each thread mmaps several areas upon startup (Stack and Thread-local
storage (TLS), thread signal stack, indirect ref table), which requires
taking mmap_lock in write mode. Page faults take mmap_lock in read mode.
During app launch, both thread creation and page faults establishing the
active workinget are happening in parallel and that causes lock contention
between mm writers and readers even if updates and page faults are
happening in different VMAs. Per-vma locks prevent this contention by
providing more granular lock.
Google Fibers:
We have several dynamically sized thread pools that spawn new threads
under increased load and reduce their number when idling. For example,
Google's in-process scheduling/threading framework, UMCG/Fibers, is backed
by such a thread pool. When idling, only a small number of idle worker
threads are available; when a spike of incoming requests arrive, each
request is handled in its own "fiber", which is a work item posted onto a
UMCG worker thread; quite often these spikes lead to a number of new
threads spawning. Each new thread needs to allocate and register an RSEQ
section on its TLS, then register itself with the kernel as a UMCG worker
thread, and only after that it can be considered by the in-process
UMCG/Fiber scheduler as available to do useful work. In short, during an
incoming workload spike new threads have to be spawned, and they perform
several syscalls (RSEQ registration, UMCG worker registration, memory
allocations) before they can actually start doing useful work. Removing
any bottlenecks on this thread startup path will greatly improve our
services' latencies when faced with request/workload spikes.
At high scale, mmap_lock contention during thread creation and stack page
faults leads to user-visible multi-second serving latencies in a similar
pattern to Android app startup. Per-VMA locking patchset has been run
successfully in limited experiments with user-facing production workloads.
In these experiments, we observed that the peak thread creation rate was
high enough that thread creation is no longer a bottleneck.
TCP zerocopy receive:
From the point of view of TCP zerocopy receive, the per-vma lock patch is
massively beneficial.
In today's implementation, a process with N threads where N - 1 are
performing zerocopy receive and 1 thread is performing madvise() with the
write lock taken (e.g. needs to change vm_flags) will result in all N -1
receive threads blocking until the madvise is done. Conversely, on a busy
process receiving a lot of data, an madvise operation that does need to
take the mmap lock in write mode will need to wait for all of the receives
to be done - a lose:lose proposition. Per-VMA locking _removes_ by
definition this source of contention entirely.
There are other benefits for receive as well, chiefly a reduction in
cacheline bouncing across receiving threads for locking/unlocking the
single mmap lock. On an RPC style synthetic workload with 4KB RPCs:
1a) The find+lock+unlock VMA path in the base case, without the
per-vma lock patchset, is about 0.7% of cycles as measured by perf.
1b) mmap_read_lock + mmap_read_unlock in the base case is about 0.5%
cycles overall - most of this is within the TCP read hotpath (a small
fraction is 'other' usage in the system).
2a) The find+lock+unlock VMA path, with the per-vma patchset and a
trivial patch written to take advantage of it in TCP, is about 0.4% of
cycles (down from 0.7% above)
2b) mmap_read_lock + mmap_read_unlock in the per-vma patchset is <
0.1% cycles and is out of the TCP read hotpath entirely (down from
0.5% before, the remaining usage is the 'other' usage in the system).
So, in addition to entirely removing an onerous source of contention,
it also reduces the CPU cycles of TCP receive zerocopy by about 0.5%+
(compared to overall cycles in perf) for the 'small' RPC scenario.
In https://lkml.kernel.org/r/87fsaqouyd.fsf_-_@stealth, Punit
demonstrated throughput improvements of as much as 188% from this
patchset.
This patch (of 25):
This configuration variable will be used to build the support for VMA
locking during page fault handling.
This is enabled on supported architectures with SMP and MMU set.
The architecture support is needed since the page fault handler is called
from the architecture's page faulting code which needs modifications to
handle faults under VMA lock.
Link: https://lkml.kernel.org/r/20230227173632.3292573-1-surenb@google.com
Link: https://lkml.kernel.org/r/20230227173632.3292573-10-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Prevent filesystems from doing things which sleep in their map_pages
method. This is in preparation for a pagefault path protected only by
RCU.
Link: https://lkml.kernel.org/r/20230327174515.1811532-4-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Since commit ee6d3dd4ed ("driver core: make kobj_type constant.") the
driver core allows the usage of const struct kobj_type.
Take advantage of this to constify the structure definition to prevent
modification at runtime.
These structures were not constified in commit e56397e8c4
("mm/damon/sysfs: make kobj_type structures constant") as they didn't
exist when that patch was written.
Link: https://lkml.kernel.org/r/20230324-b4-kobj_type-damon2-v1-1-48ddbf1c8fcf@weissschuh.net
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: SeongJae Park <sj@kernel.org>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Turn a pr_info() into a pr_debug() to prevent dmesg spamming on systems
where memory hotplug is a frequent operation.
Link: https://lkml.kernel.org/r/20230323174349.35990-1-krckatom@amazon.de
Signed-off-by: Tomas Krcka <krckatom@amazon.de>
Suggested-by: Jan H. Schönherr <jschoenh@amazon.de>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Rather than setting err = -1 and only resetting if we hit merge cases,
explicitly check the non-mergeable case to make it abundantly clear that
we only proceed with the rest if something is mergeable, default err to 0
and only update if an error might occur.
Move the merge_prev, merge_next cases closer to the logic determining
curr, next and reorder initial variables so they are more logically
grouped.
This has no functional impact.
Link: https://lkml.kernel.org/r/99259fbc6403e80e270e1cc4612abbc8620b121b.1679516210.git.lstoakes@gmail.com
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: David Hildenbrand <david@redhat.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Vernon Yang <vernon2gm@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Previously, vma was an uninitialised variable which was only definitely
assigned as a result of the logic covering all possible input cases - for
it to have remained uninitialised, prev would have to be NULL, and next
would _have_ to be mergeable.
The value of res defaults to NULL, so we can neatly eliminate the
assignment to res and vma in the if (prev) block and ensure that both res
and vma are both explicitly assigned, by just setting both to prev.
In addition we add an explanation as to under what circumstances both
might change, and since we absolutely do rely on addr == curr->vm_start
should curr exist, assert that this is the case.
Link: https://lkml.kernel.org/r/83938bed24422cbe5954bbf491341674becfe567.1679516210.git.lstoakes@gmail.com
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Vernon Yang <vernon2gm@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Use find_vma_intersection() and vma_lookup() to both simplify the logic
and to fold the end == next->vm_start condition into one block.
This groups all of the simple range checks together and establishes the
invariant that, if prev, curr or next are non-NULL then their positions
are as expected.
This has no functional impact.
Link: https://lkml.kernel.org/r/c6d960641b4ba58fa6ad3d07bf68c27d847963c8.1679516210.git.lstoakes@gmail.com
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Vernon Yang <vernon2gm@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "further cleanup of vma_merge()", v2.
Following on from Vlastimil Babka's patch series "cleanup vma_merge() and
improve mergeability tests" which was in turn based on Liam's prior
cleanups, this patch series introduces changes discussed in review of
Vlastimil's series and goes further in attempting to make the logic as
clear as possible.
Nearly all of this should have absolutely no functional impact, however it
does add a singular VM_WARN_ON() case.
With many thanks to Vernon for helping kick start the discussion around
simplification - abstract use of vma did indeed turn out not to be
necessary - and to Liam for his excellent suggestions which greatly
simplified things.
This patch (of 4):
Previously the ASCII diagram above vma_merge() and the accompanying
variable naming was rather confusing, however recent efforts by Liam
Howlett and Vlastimil Babka have significantly improved matters.
This patch goes a little further - replacing 'X' with 'N' which feels a
lot more natural and replacing what was 'N' with 'C' which stands for
'concurrent' VMA.
No word quite describes a VMA that has coincident start as the input span,
concurrent, abbreviated to 'curr' (and which can be thought of also as
'current') however fits intuitions well alongside prev and next.
This has no functional impact.
Link: https://lkml.kernel.org/r/cover.1679431180.git.lstoakes@gmail.com
Link: https://lkml.kernel.org/r/6001e08fa7e119470cbb1d2b6275ad8d742ff9a7.1679431180.git.lstoakes@gmail.com
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Vernon Yang <vernon2gm@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Having previously laid the foundation for converting vread() to an
iterator function, pull the trigger and do so.
This patch attempts to provide minimal refactoring and to reflect the
existing logic as best we can, for example we continue to zero portions of
memory not read, as before.
Overall, there should be no functional difference other than a performance
improvement in /proc/kcore access to vmalloc regions.
Now we have eliminated the need for a bounce buffer in read_kcore_iter(),
we dispense with it, and try to write to user memory optimistically but
with faults disabled via copy_page_to_iter_nofault(). We already have
preemption disabled by holding a spin lock. We continue faulting in until
the operation is complete.
Additionally, we must account for the fact that at any point a copy may
fail (most likely due to a fault not being able to occur), we exit
indicating fewer bytes retrieved than expected.
[sfr@canb.auug.org.au: fix sparc64 warning]
Link: https://lkml.kernel.org/r/20230320144721.663280c3@canb.auug.org.au
[lstoakes@gmail.com: redo Stephen's sparc build fix]
Link: https://lkml.kernel.org/r/8506cbc667c39205e65a323f750ff9c11a463798.1679566220.git.lstoakes@gmail.com
[akpm@linux-foundation.org: unbreak uio.h includes]
Link: https://lkml.kernel.org/r/941f88bc5ab928e6656e1e2593b91bf0f8c81e1b.1679511146.git.lstoakes@gmail.com
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Baoquan He <bhe@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Liu Shixin <liushixin2@huawei.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Normal page init path frees pages during the boot in MAX_ORDER chunks, but
deferred page init path does it in pageblock blocks.
Change deferred page init path to work in MAX_ORDER blocks.
For cases when MAX_ORDER is larger than pageblock, set migrate type to
MIGRATE_MOVABLE for all pageblocks covered by the page.
Link: https://lkml.kernel.org/r/20230321002415.20843-1-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This functionality's sole user, the drm ttm module, removed support for it
in commit 0d97950953 ("drm/ttm: remove ttm_bo_vm_insert_huge()") as the
whole approach is currently unworkable without a PMD/PUD special bit and
updates to GUP.
Link: https://lkml.kernel.org/r/604c2ad79659d4b8a6e3e1611c6219d5d3233988.1678661628.git.lstoakes@gmail.com
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Aaron Tomlin <atomlin@atomlin.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: "Russell King (Oracle)" <linux@armlinux.org.uk>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "Remove drm/ttm-specific mm changes".
Functionality was added specifically for the DRM TTM driver to support
mapping memory for VM_MIXEDMAP VMAs with customised protection flags,
however this has now been rolled back as issues were found with this
approach.
This series removes the mm changes too, retaining some of the useful
comments.
This patch (of 3):
The sole user of vmf_insert_mixed_prot(), the drm ttm module, stopped
using this in commit f91142c621 ("drm/ttm: nuke VM_MIXEDMAP on BO
mappings v3") citing use of VM_MIXEDMAP in this case being terribly
broken.
Remove this now-dead code and references to it, but retain the useful
description of the prot != vma->vm_page_prot case, moving it to
vmf_insert_pfn_prot() instead.
Link: https://lkml.kernel.org/r/cover.1678661628.git.lstoakes@gmail.com
Link: https://lkml.kernel.org/r/a069644388e6f1593a7020d15840e6fc9f39bcaf.1678661628.git.lstoakes@gmail.com
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Aaron Tomlin <atomlin@atomlin.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: "Russell King (Oracle)" <linux@armlinux.org.uk>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Currently the memtest results were only presented in dmesg.
When running a large fleet of devices without ECC RAM it's currently not
easy to do bulk monitoring for memory corruption. You have to parse
dmesg, but that's a ring buffer so the error might disappear after some
time. In general I do not consider dmesg to be a great API to query RAM
status.
In several companies I've seen such errors remain undetected and cause
issues for way too long. So I think it makes sense to provide a
monitoring API, so that we can safely detect and act upon them.
This adds /proc/meminfo entry which can be easily used by scripts.
Link: https://lkml.kernel.org/r/20230321103430.7130-1-tomas.mudrunka@gmail.com
Signed-off-by: Tomas Mudrunka <tomas.mudrunka@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
vmalloc_init() is called only from mm_core_init(), there is no need to
declare it in include/linux/vmalloc.h
Move vmalloc_init() declaration to mm/internal.h
Link: https://lkml.kernel.org/r/20230321170513.2401534-14-rppt@kernel.org
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Doug Berger <opendmb@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
kmem_cache_init() is called only from mm_core_init(), there is no need to
declare it in include/linux/slab.h
Move kmem_cache_init() declaration to mm/slab.h
Link: https://lkml.kernel.org/r/20230321170513.2401534-13-rppt@kernel.org
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Doug Berger <opendmb@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
mem_init_print_info() is only called from mm_core_init().
Move it close to the caller and make it static.
Link: https://lkml.kernel.org/r/20230321170513.2401534-12-rppt@kernel.org
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Doug Berger <opendmb@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When deferred initialization of struct pages is enabled, page_ext_init()
must be called after all the deferred initialization is done, but there is
no point to keep it a separate call from kernel_init_freeable() right
after page_alloc_init_late().
Fold the call to page_ext_init() into page_alloc_init_late() and localize
deferred_struct_pages variable.
Link: https://lkml.kernel.org/r/20230321170513.2401534-11-rppt@kernel.org
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Doug Berger <opendmb@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
init_mem_debugging_and_hardening() is only called from mm_core_init().
Move it close to the caller, make it static and rename it to
mem_debugging_and_hardening_init() for consistency with surrounding
convention.
Link: https://lkml.kernel.org/r/20230321170513.2401534-10-rppt@kernel.org
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Doug Berger <opendmb@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
and drop pgtable_init() as it has no real value and its name is
misleading.
Link: https://lkml.kernel.org/r/20230321170513.2401534-9-rppt@kernel.org
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Doug Berger <opendmb@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Sergei Shtylyov <sergei.shtylyov@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Make mm_init() a part of mm/ codebase. mm_core_init() better describes
what the function does and does not clash with mm_init() in kernel/fork.c
Link: https://lkml.kernel.org/r/20230321170513.2401534-8-rppt@kernel.org
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Doug Berger <opendmb@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The page_alloc_init() name is really misleading because all this function
does is sets up CPU hotplug callbacks for the page allocator.
Rename it to page_alloc_init_cpuhp() so that name will reflect what the
function does.
Link: https://lkml.kernel.org/r/20230321170513.2401534-6-rppt@kernel.org
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Doug Berger <opendmb@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The hashdist variable must be initialized before the first call to
alloc_large_system_hash() and free_area_init() looks like a better place
for it than page_alloc_init().
Move hashdist handling to mm/mm_init.c
Link: https://lkml.kernel.org/r/20230321170513.2401534-5-rppt@kernel.org
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Doug Berger <opendmb@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The bulk of memory management initialization code is spread all over
mm/page_alloc.c and makes navigating through page allocator functionality
difficult.
Move most of the functions marked __init and __meminit to mm/mm_init.c to
make it better localized and allow some more spare room before
mm/page_alloc.c reaches 10k lines.
No functional changes.
Link: https://lkml.kernel.org/r/20230321170513.2401534-4-rppt@kernel.org
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Doug Berger <opendmb@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Instead of duplicating long static_branch_enabled(&check_pages_enabled)
wrap it in a helper function is_check_pages_enabled()
Link: https://lkml.kernel.org/r/20230321170513.2401534-3-rppt@kernel.org
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Doug Berger <opendmb@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The get_page_from_free_area() helper is only used in mm/page_alloc.c so
move it there to reduce noise in include/linux/mmzone.h
Link: https://lkml.kernel.org/r/20230319114214.2133332-1-rppt@kernel.org
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>