Return the value set_link_state() directly instead of storing it in
another redundant variable.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Link: https://lore.kernel.org/r/20220901074209.313004-1-ye.xingchen@zte.com.cn
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Split out flags from ib_device::device_cap_flags that are only used
internally to the kernel into kernel_cap_flags that is not part of the
uapi. This limits the device_cap_flags to being the same bitmap that will
be copied to userspace.
This cleanly splits out the uverbs flags from the kernel flags to avoid
confusion in the flags bitmap.
Add some short comments describing which each of the kernel flags is
connected to. Remove unused kernel flags.
Link: https://lore.kernel.org/r/0-v2-22c19e565eef+139a-kern_caps_jgg@nvidia.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The AIP code signals the phys_mtu in the following query_port()
fragment:
props->phys_mtu = HFI1_CAP_IS_KSET(AIP) ? hfi1_max_mtu :
ib_mtu_enum_to_int(props->max_mtu);
Using the largest MTU possible should not depend on AIP.
Fix by unconditionally using the hfi1_max_mtu value.
Fixes: 6d72344cf6 ("IB/ipoib: Increase ipoib Datagram mode MTU's upper limit")
Link: https://lore.kernel.org/r/1644348309-174874-1-git-send-email-mike.marciniszyn@cornelisnetworks.com
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When optional counter support was added the allocation of the memory
holding the counter descriptors was not cleared properly. This caused
WARN_ON()s in the IB/sysfs code to be hit.
This is because the uninitialized memory made some of the counters wrongly
look like optional counters. Use kzalloc.
While here change the sizeof() calls to use the pointer rather than the
name of the type.
WARNING: CPU: 0 PID: 32644 at drivers/infiniband/core/sysfs.c:1064 ib_setup_port_attrs+0x7e1/0x890 [ib_core]
CPU: 0 PID: 32644 Comm: kworker/0:2 Tainted: G S W 5.15.0+ #36
Hardware name: Intel Corporation S2600WTT/S2600WTT, BIOS SE5C610.86B.01.01.0018.C4.072020161249 07/20/2016
Workqueue: events work_for_cpu_fn
RIP: 0010:ib_setup_port_attrs+0x7e1/0x890 [ib_core]
RSP: 0018:ffffc90006ea3c40 EFLAGS: 00010202
RAX: 0000000000000068 RBX: ffff888106ad8000 RCX: 0000000000000138
RDX: ffff888126c84c00 RSI: ffff888103c41000 RDI: 0000000000000124
RBP: ffff88810f63a801 R08: ffff888126c8a000 R09: 0000000000000001
R10: ffffffffa09acf20 R11: 0000000000000065 R12: ffff88810f63a800
R13: ffff88810f63a800 R14: ffff88810f63a8e0 R15: 0000000000000001
FS: 0000000000000000(0000) GS:ffff888667a00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005590102cb078 CR3: 000000000240a003 CR4: 00000000001706f0
Call Trace:
ib_register_device.cold.44+0x23e/0x2d0 [ib_core]
rvt_register_device+0xfa/0x230 [rdmavt]
hfi1_register_ib_device+0x623/0x690 [hfi1]
init_one.cold.36+0x2d1/0x49b [hfi1]
local_pci_probe+0x45/0x80
work_for_cpu_fn+0x16/0x20
process_one_work+0x1b1/0x360
worker_thread+0x1d4/0x3a0
kthread+0x11a/0x140
ret_from_fork+0x22/0x30
Fixes: 5e2ddd1e59 ("RDMA/counter: Add optional counter support")
Link: https://lore.kernel.org/r/20211115200913.124104.47770.stgit@awfm-01.cornelisnetworks.com
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add a counter statistic descriptor structure in rdma_hw_stats. In addition
to the counter name, more meta-information will be added. This code
extension is needed for optional-counter support in the following patches.
Link: https://lore.kernel.org/r/20211008122439.166063-4-markzhang@nvidia.com
Signed-off-by: Aharon Landau <aharonl@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
init_port was only being used to register sysfs attributes against the
port kobject. Now that all users are creating static attribute_group's we
can simply set the attribute_group list in the ops and the core code can
just handle it directly.
This makes all the sysfs management quite straightforward and prevents any
driver from abusing the naked port kobject in future because no driver
code can access it.
Link: https://lore.kernel.org/r/114f68f3d921460eafe14cea5a80ca65d81729c3.1623427137.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This is being used to implement both the port and device global stats,
which is causing some confusion in the drivers. For instance EFA and i40iw
both seem to be misusing the device stats.
Split it into two ops so drivers that don't support one or the other can
leave the op NULL'd, making the calling code a little simpler to
understand.
Link: https://lore.kernel.org/r/1955c154197b2a159adc2dc97266ddc74afe420c.1623427137.git.leonro@nvidia.com
Tested-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Current code uses many different types when dealing with a port of a RDMA
device: u8, unsigned int and u32. Switch to u32 to clean up the logic.
This allows us to make (at least) the core view consistent and use the
same type. Unfortunately not all places can be converted. Many uverbs
functions expect port to be u8 so keep those places in order not to break
UAPIs. HW/Spec defined values must also not be changed.
With the switch to u32 we now can support devices with more than 255
ports. U32_MAX is reserved to make control logic a bit easier to deal
with. As a device with U32_MAX ports probably isn't going to happen any
time soon this seems like a non issue.
When a device with more than 255 ports is created uverbs will report the
RDMA device as having 255 ports as this is the max currently supported.
The verbs interface is not changed yet because the IBTA spec limits the
port size in too many places to be u8 and all applications that relies in
verbs won't be able to cope with this change. At this stage, we are
extending the interfaces that are using vendor channel solely
Once the limitation is lifted mlx5 in switchdev mode will be able to have
thousands of SFs created by the device. As the only instance of an RDMA
device that reports more than 255 ports will be a representor device and
it exposes itself as a RAW Ethernet only device CM/MAD/IPoIB and other
ULPs aren't effected by this change and their sysfs/interfaces that are
exposes to userspace can remain unchanged.
While here cleanup some alignment issues and remove unneeded sanity
checks (mainly in rdmavt),
Link: https://lore.kernel.org/r/20210301070420.439400-1-leon@kernel.org
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes the following W=1 kernel build warning(s):
drivers/infiniband/hw/hfi1/verbs.c:741: warning: Function parameter or member 'qp' not described in 'update_tx_opstats'
drivers/infiniband/hw/hfi1/verbs.c:1160: warning: Function parameter or member 'pkey' not described in 'egress_pkey_check'
drivers/infiniband/hw/hfi1/verbs.c:1160: warning: Excess function parameter 'bkey' description in 'egress_pkey_check'
drivers/infiniband/hw/hfi1/verbs.c:1217: warning: Function parameter or member 'qp' not described in 'get_send_routine'
drivers/infiniband/hw/hfi1/verbs.c:1217: warning: Function parameter or member 'ps' not described in 'get_send_routine'
Link: https://lore.kernel.org/r/20210126124732.3320971-20-lee.jones@linaro.org
Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
According to the IB spec active_speed size should be u16 and not u8 as
before. Changing it to allow further extensions in offered speeds.
Link: https://lore.kernel.org/r/20200917090223.1018224-4-leon@kernel.org
Signed-off-by: Aharon Landau <aharonl@mellanox.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This patch hooks the transmit side of the datagram netdev with
ipoib by setting the rdma_netdev_get_params function for the
hfi1 ib_device_ops structue. It also enables the receiving side
by adding the AIP capability into the default capabilities.
Link: https://lore.kernel.org/r/20200511160712.173205.65700.stgit@awfm-01.aw.intel.com
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Piotr Stankiewicz <piotr.stankiewicz@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Currently the ipoib UD mtu is restricted to 4K bytes. Remove this
limitation so that the IPOIB module can potentially use an MTU (in UD
mode) that is bounded by the MTU of the underlying device. A field is
added to the ib_port_attr structure to indicate the maximum physical
MTU the underlying device supports.
Link: https://lore.kernel.org/r/20200511160618.173205.23053.stgit@awfm-01.aw.intel.com
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Sadanand Warrier <sadanand.warrier@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Adds capability to create a qpn to be recognized as an accelerated
UD QP for ipoib.
This is accomplished by reserving 0x81 in byte[0] of the qpn as the
prefix for these qp types and reserving qpns between 0x810000 and
0x81ffff.
The hfi1 capability mask already contained a flag for the VNIC netdev.
This has been renamed and extended to include both VNIC and ipoib.
The rvt code to allocate qps now recognizes this flag and sets 0x81
into byte[0] of the qpn.
The code to allocate qpns is modified to reset the qpn numbering when it
is detected that a value is located in byte[0] for a UD QP and it is a
qpn being requested for net dev use. If it is a regular UD QP then it is
allowable to have bits set in byte[0] of the qpn and provide the
previously normal behavior.
The code to free the qpn now checks for the AIP prefix value of 0x81 and
removes it from the qpn before being freed so that the lower 16 bit
number can be reused.
This patch requires minor changes in the IB core and ipoib to facilitate
the creation of accelerated UP QPs.
Link: https://lore.kernel.org/r/20200511160607.173205.11757.stgit@awfm-01.aw.intel.com
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Gary Leshner <Gary.S.Leshner@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The module parameter for KDETH qpns is being removed in favor
of always using the default value of 0x80 as the qpn prefix.
Defines have been added for various KDETH values including
the prefix of 0x80.
The reserved range now starts at the base value for KDETH
qpns (0x80) and extends up to and including the last qpn for
other reserved QP prefixed types.
Adjust other QP prefixed define names to match KDETH defined
names.
Link: https://lore.kernel.org/r/20200511160600.173205.27508.stgit@awfm-01.aw.intel.com
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Gary Leshner <Gary.S.Leshner@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The packet handling function, specifically the iteration of the qp list
for mad packet processing misses locking RCU before running through the
list. Not only is this incorrect, but the list_for_each_entry_rcu() call
can not be called with a conditional check for lock dependency. Remedy
this by invoking the rcu lock and unlock around the critical section.
This brings MAD packet processing in line with what is done for non-MAD
packets.
Fixes: 7724105686 ("IB/hfi1: add driver files")
Link: https://lore.kernel.org/r/20200225195445.140896.41873.stgit@awfm-01.aw.intel.com
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
There is no reason for a different pad buffer for the two
packet types.
Expand the current buffer allocation to allow for both
packet types.
Fixes: f8195f3b14 ("IB/hfi1: Eliminate allocation while atomic")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Kaike Wan <kaike.wan@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Link: https://lore.kernel.org/r/20191004204934.26838.13099.stgit@awfm-01.aw.intel.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
Jason Gunthorpe says:
====================
This is a collection of general cleanups for ODP to clarify some of the
flows around umem creation and use of the interval tree.
====================
The branch is based on v5.3-rc5 due to dependencies
* odp_fixes:
RDMA/mlx5: Use odp instead of mr->umem in pagefault_mr
RDMA/mlx5: Use ib_umem_start instead of umem.address
RDMA/core: Make invalidate_range a device operation
RDMA/odp: Use kvcalloc for the dma_list and page_list
RDMA/odp: Check for overflow when computing the umem_odp end
RDMA/odp: Provide ib_umem_odp_release() to undo the allocs
RDMA/odp: Split creating a umem_odp from ib_umem_get
RDMA/odp: Make the three ways to create a umem_odp clear
RMDA/odp: Consolidate umem_odp initialization
RDMA/odp: Make it clearer when a umem is an implicit ODP umem
RDMA/odp: Iterate over the whole rbtree directly
RDMA/odp: Use the common interval tree library instead of generic
RDMA/mlx5: Fix MR npages calculation for IB_ACCESS_HUGETLB
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
sl is controlled by user-space, hence leading to a potential
exploitation of the Spectre variant 1 vulnerability.
Fix this by sanitizing sl before using it to index ibp->sl_to_sc.
Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].
[1] https://lore.kernel.org/lkml/20180423164740.GY17484@dhcp22.suse.cz/
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Link: https://lore.kernel.org/r/20190731175428.GA16736@embeddedor
Signed-off-by: Doug Ledford <dledford@redhat.com>
When a KDETH packet is subject to fault injection during transmission,
HCRC is supposed to be omitted from the packet so that the hardware on the
receiver side would drop the packet. When creating pbc, the PbcInsertHcrc
field is set to be PBC_IHCRC_NONE if the KDETH packet is subject to fault
injection, but overwritten with PBC_IHCRC_LKDETH when update_hcrc() is
called later.
This problem is fixed by not calling update_hcrc() when the packet is
subject to fault injection.
Fixes: 6b6cf9357f ("IB/hfi1: Set PbcInsertHcrc for TID RDMA packets")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20190715164546.74174.99296.stgit@awfm-01.aw.intel.com
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl0Os1seHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGtx4H/j6i482XzcGFKTBm
A7mBoQpy+kLtoUov4EtBAR62OuwI8rsahW9di37QKndPoQrczWaKBmr3De6LCdPe
v3pl3O6wBbvH5ru+qBPFX9PdNbDvimEChh7LHxmMxNQq3M+AjZAZVJyfpoiFnx35
Fbge+LZaH/k8HMwZmkMr5t9Mpkip715qKg2o9Bua6dkH0AqlcpLlC8d9a+HIVw/z
aAsyGSU8jRwhoAOJsE9bJf0acQ/pZSqmFp0rDKqeFTSDMsbDRKLGq/dgv4nW0RiW
s7xqsjb/rdcvirRj3rv9+lcTVkOtEqwk0PVdL9WOf7g4iYrb3SOIZh8ZyViaDSeH
VTS5zps=
=huBY
-----END PGP SIGNATURE-----
Merge tag 'v5.2-rc6' into rdma.git for-next
For dependencies in next patches.
Resolve conflicts:
- Use uverbs_get_cleared_udata() with new cq allocation flow
- Continue to delete nes despite SPDX conflict
- Resolve list appends in mlx5_command_str()
- Use u16 for vport_rule stuff
- Resolve list appends in struct ib_client
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The call to sc_buffer_alloc currently returns NULL (no buffer) or
a buffer descriptor.
There is a third case when the port is down. Currently that
returns NULL and this prevents the caller from properly handling the
sc_buffer_alloc() failure. A verbs code link test after the call is
racy so the indication needs to come from the state check inside the allocation
routine to be valid.
Fix by encoding the ECOMM failure like SDMA. IS_ERR_OR_NULL() tests
are added at all call sites. For verbs send, this needs to treat any
error by returning a completion without any MMIO copy.
Fixes: 7724105686 ("IB/hfi1: add driver files")
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
SDMA and pio flushes will cause a lot of packets to be transmitted
after a link has gone down, using a lot of CPU to retransmit
packets.
Fix for RC QPs by recognizing the flush status and:
- Forcing a timer start
- Putting the QP into a "send one" mode
Fixes: 7724105686 ("IB/hfi1: add driver files")
Reviewed-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This more closely follows how other subsytems work, with owner being a
member of the structure containing the function pointers.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
No reason for every driver to emit code to set this, just make it part of
the driver's existing static const ops structure.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The command 'ibv_devinfo -v' reports 0 for max_mr.
Fix by assigning the query values after the mr lkey_table has been built
rather than early on in the driver.
Fixes: 7b1e2099ad ("IB/rdmavt: Move memory registration into rdmavt")
Reviewed-by: Josh Collier <josh.d.collier@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Also remove hfi1_devs_list.
Signed-off-by: Matthew Wilcox <willy@infradead.org>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The adaptive PIO implementation only considers the current packet size
when deciding between SDMA and pio for a packet.
This causes credit return forces if small and large packets are
interleaved.
Add a running average to avoid costly credit forces so that a large
sequence of small packets is required to go below the threshold that
chooses pio.
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
ACK packets are generally associated with request completion and resource
release and therefore should be sent first. This patch optimizes the
send engine by using the following policies:
(1) QPs with RVT_S_ACK_PENDING bit set in qp->s_flags or qpriv->s_flags
should have their priority incremented;
(2) QPs with ACK or TID-ACK packet queued should have their priority
incremented;
(3) When a QP is queued to the wait list due to resource constraints, it
will be queued to the head if it has ACK packet to send;
(4) When selecting qps to run from the wait list, the one with the highest
priority and starve_cnt will be selected; each priority will be equivalent
to a fixed number of starve_cnt (16).
Reviewed-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch integrates TID RDMA WRITE protocol into normal RDMA verbs
framework. The TID RDMA WRITE protocol is an end-to-end protocol
between the hfi1 drivers on two OPA nodes that converts a qualified
RDMA WRITE request into a TID RDMA WRITE request to avoid data copying
on the responder side.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The TID RDMA WRITE protocol differs from normal IB RDMA WRITE
in that TID RDMA WRITE requests do require responses, not just
ACKs.
Therefore, TID RDMA WRITE requests need to be treated as RDMA
READ requests from the point of view of the QPs' s_ack_queue.
In other words, the QPs' need to allow for TID RDMA WRITE
requests to be stored in their s_ack_queue.
However, because the user does not know anything about the TID
RDMA capability and/or protocols, these extra entries in the
queue cannot be advertized to the user.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch integrates the TID RDMA READ protocol into the IB RC protocol.
This protocol is an end-to-end protocol between the hfi1 drivers on two
OPA nodes that converts a qualified RDMA READ request into a TID RDMA
READ request to avoid data copying on the requester side. The following
codes are added in this patch:
- Send the TID RDMA READ request;
- Complete the TID RDMA READ send request;
- Send the TID RDMA READ response;
- Complete the TID RDMA READ request;
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This commit adds the TID RDMA READ pointers to the receiving opcode
handlers. It also adds TID RDMA READ header sizes to header size table.
A function to print the RHF EFLAGS errors is created so that it can be
shared by both IB and TID RDMA receiving functions.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
All TID RDMA packets are in KDETH packet format and therefore the
PbcInsertHcrc must be set properly before sending the packet to
hardware. Otherwise, the packets will be dropped by the receiver.
By default, HCRC is not inserted for 9B packets without KDETH, and
this patch adds that back for TID RDMA packets.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
TID entries are used by hfi1 hardware to receive data payload from
incoming packets directly into a user buffer and thus avoid data copying
by software. This patch implements the functions for TID allocation,
freeing, and programming TID RcvArray entries in hardware for kernel
clients. TID entries are managed via lists of TID groups similar to PSM.
Furthermore, to track TID resource allocation for each request, software
flows are also allocated and freed as needed. Since software flows
consume large amount of memory for tracking TID allocation and freeing,
it is generally desirable to allocate them dynamically in the send queue
and only for TID RDMA requests, but pre-allocate them for receive queue
because the send queue could have thousands of entries while the receive
queue has only a limited number of entries.
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
OPFN parameter negotiation allows a pair of connected RC QPs to exchange
a set of parameters in succession. This negotiation does not commence
till the first ULP request. Because OPFN operations are operations
private to the driver, they do not generate user completions or put the
QP into error when they run out of retries. This patch integrates the
OPFN protocol into the transactions of an RC QP.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The OPFN protocol uses the COMPARE_SWAP request to exchange data
between the requester and the responder and therefore needs to
be stored in the QP's s_ack_queue when the request is received
on the responder side. However, because the user does not know
anything about the OPFN protocol, this extra entry in the
queue cannot be advertised to the user. This patch adds an extra
entry in a QP's s_ack_queue.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Sge sizing is done in several places using an open coded method.
This can cause maintenance issues. The open coded method is
encapsulated in a helper routine. The helper was introduced with
commit:
1198fcea8a ("IB/hfi1, rdmavt: Move SGE state helper routines into
rdmavt")
Update all call sites that have the open coded path with the helper
routine.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Most provider routines are callback routines which ib core invokes.
_callback suffix doesn't convey information about when such callback is
invoked. Therefore, rename port_callback to init_port.
Additionally, store the init_port function pointer in ib_device_ops, so
that it can be accessed in subsequent patches when binding rdma device to
net namespace.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This has been a fairly typical cycle, with the usual sorts of driver
updates. Several series continue to come through which improve and
modernize various parts of the core code, and we finally are starting to
get the uAPI command interface cleaned up.
- Various driver fixes for bnxt_re, cxgb3/4, hfi1, hns, i40iw, mlx4, mlx5,
qib, rxe, usnic
- Rework the entire syscall flow for uverbs to be able to run over
ioctl(). Finally getting past the historic bad choice to use write()
for command execution
- More functional coverage with the mlx5 'devx' user API
- Start of the HFI1 series for 'TID RDMA'
- SRQ support in the hns driver
- Support for new IBTA defined 2x lane widths
- A big series to consolidate all the driver function pointers into
a big struct and have drivers provide a 'static const' version of the
struct instead of open coding initialization
- New 'advise_mr' uAPI to control device caching/loading of page tables
- Support for inline data in SRPT
- Modernize how umad uses the driver core and creates cdev's and sysfs
files
- First steps toward removing 'uobject' from the view of the drivers
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEfB7FMLh+8QxL+6i3OG33FX4gmxoFAlwhV2oACgkQOG33FX4g
mxpF8A/9EkRCg6wCDC59maA53b5PjuNmD//9hXbycQPQSlxntI2PyYtxrzBqc0+2
yIaFFMehL41XNN6y1zfkl7ndl62McCH2TpiidU8RyTxVw/e3KsDD5sU6++atfHRo
M82RNfedDtxPG8TcCPKVLof6JHADApGSR1r4dCYfAnu7KFMyvlLmeYyx4r/2E6yC
iQPmtKVOdbGkuWGeX+brGEA0vg7FUOAvaysnxddjyh9hyem4h0SUR3Af/Ik0N5ME
PYzC+hMKbkPVBLoCWyg7QwUaqK37uWwguMQLtI2byF7FgbiK/lBQt6TsidR4Fw3p
EalL7uqxgCTtLYh918vxLFjdYt6laka9j7xKCX8M8d06sy/Lo8iV4hWjiTESfMFG
usqs7D6p09gA/y1KISji81j6BI7C92CPVK2drKIEnfyLgY5dBNFcv9m2H12lUCH2
NGbfCNVaTQVX6bFWPpy2Bt2y/Litsfxw5RviehD7jlG0lQjsXGDkZzsDxrMSSlNU
S79iiTJyK4kUZkXzrSSlN58pLBlbupJwm5MDjKmM+irsrsCHjGIULvc902qtnC3/
8ImiTtW6XvqLbgWXyy2Th8/ZgRY234p1ybhog+DFaGKUch0XqB7VXTV2OZm0GjcN
Fp4PUeBt+/gBgYqjpuffqQc1rI4uwXYSoz7wq9RBiOpw5zBFT1E=
=T0p1
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"This has been a fairly typical cycle, with the usual sorts of driver
updates. Several series continue to come through which improve and
modernize various parts of the core code, and we finally are starting
to get the uAPI command interface cleaned up.
- Various driver fixes for bnxt_re, cxgb3/4, hfi1, hns, i40iw, mlx4,
mlx5, qib, rxe, usnic
- Rework the entire syscall flow for uverbs to be able to run over
ioctl(). Finally getting past the historic bad choice to use
write() for command execution
- More functional coverage with the mlx5 'devx' user API
- Start of the HFI1 series for 'TID RDMA'
- SRQ support in the hns driver
- Support for new IBTA defined 2x lane widths
- A big series to consolidate all the driver function pointers into a
big struct and have drivers provide a 'static const' version of the
struct instead of open coding initialization
- New 'advise_mr' uAPI to control device caching/loading of page
tables
- Support for inline data in SRPT
- Modernize how umad uses the driver core and creates cdev's and
sysfs files
- First steps toward removing 'uobject' from the view of the drivers"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (193 commits)
RDMA/srpt: Use kmem_cache_free() instead of kfree()
RDMA/mlx5: Signedness bug in UVERBS_HANDLER()
IB/uverbs: Signedness bug in UVERBS_HANDLER()
IB/mlx5: Allocate the per-port Q counter shared when DEVX is supported
IB/umad: Start using dev_groups of class
IB/umad: Use class_groups and let core create class file
IB/umad: Refactor code to use cdev_device_add()
IB/umad: Avoid destroying device while it is accessed
IB/umad: Simplify and avoid dynamic allocation of class
IB/mlx5: Fix wrong error unwind
IB/mlx4: Remove set but not used variable 'pd'
RDMA/iwcm: Don't copy past the end of dev_name() string
IB/mlx5: Fix long EEH recover time with NVMe offloads
IB/mlx5: Simplify netdev unbinding
IB/core: Move query port to ioctl
RDMA/nldev: Expose port_cap_flags2
IB/core: uverbs copy to struct or zero helper
IB/rxe: Reuse code which sets port state
IB/rxe: Make counters thread safe
IB/mlx5: Use the correct commands for UMEM and UCTX allocation
...
Initialize ib_device_ops with the supported operations using
ib_set_device_ops().
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Commit 4e045572e2 ("IB/hfi1: Add unique txwait_lock for txreq events")
laid the ground work to support per resource waiting locking.
This patch adds that with a lock unique to each sdma engine and pio
sendcontext and makes necessary changes for verbs, PSM, and vnic to use
the new locks.
This is particularly beneficial for smaller messages that will exhaust
resources at a faster rate.
Fixes: 7724105686 ("IB/hfi1: add driver files")
Reviewed-by: Gary Leshner <Gary.S.Leshner@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch adds an interface to allow the driver to initialize the QP priv
struct when the QP is created and after the qpn has been assigned. A
field is added to the QP priv struct to reference the rcd and two new
files are added to contain the function to initialize the rcd field so
that more TID RDMA related code can be added here later.
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
An incorrect sge sizing in the HFI PIO path will cause an OOPs similar to
this:
BUG: unable to handle kernel NULL pointer dereference at (null)
IP: [] hfi1_verbs_send_pio+0x3d8/0x530 [hfi1]
PGD 0
Oops: 0000 1 SMP
Call Trace:
? hfi1_verbs_send_dma+0xad0/0xad0 [hfi1]
hfi1_verbs_send+0xdf/0x250 [hfi1]
? make_rc_ack+0xa80/0xa80 [hfi1]
hfi1_do_send+0x192/0x430 [hfi1]
hfi1_do_send_from_rvt+0x10/0x20 [hfi1]
rvt_post_send+0x369/0x820 [rdmavt]
ib_uverbs_post_send+0x317/0x570 [ib_uverbs]
ib_uverbs_write+0x26f/0x420 [ib_uverbs]
? security_file_permission+0x21/0xa0
vfs_write+0xbd/0x1e0
? mntput+0x24/0x40
SyS_write+0x7f/0xe0
system_call_fastpath+0x16/0x1b
Fix by adding the missing sizing check to correctly determine the sge
length.
Fixes: 7724105686 ("IB/hfi1: add driver files")
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Use rdma_set_device_sysfs_group() to register device attributes and
simplify the driver.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
