linux/gpio.h is deprecated and subject to remove.
The driver doesn't use it directly, replace it
with what is really being used.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240508114519.972082-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Real number of Transmit queues are incremented when user enables HTB
class and vice versa. Depending on SKB priority driver returns transmit
queue (Txq). Transmit queues and Send queues are one-to-one mapped.
In few scenarios, Driver is returning transmit queue value which is
greater than real number of transmit queue and Stack detects this as
error and overwrites transmit queue value.
For example
user has added two classes and real number of queues are incremented
accordingly
- tc class add dev eth1 parent 1: classid 1:1 htb
rate 100Mbit ceil 100Mbit prio 1 quantum 1024
- tc class add dev eth1 parent 1: classid 1:2 htb
rate 100Mbit ceil 200Mbit prio 7 quantum 1024
now if user deletes the class with id 1:1, driver decrements the real
number of queues
- tc class del dev eth1 classid 1:1
But for the class with id 1:2, driver is returning transmit queue
value which is higher than real number of transmit queue leading
to below error
eth1 selects TX queue x, but real number of TX queues is x
This patch solves the problem by assigning deleted class transmit
queue/send queue to active class.
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240508070935.11501-1-hkelam@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Make use of standard helpers to simplify filling in stats strings.
The first two ethtool_puts() changes address the following fortification
warnings flagged by W=1 builds with clang-18. (The last ethtool_puts
change does not because the warning relates to writing beyond the first
element of an array, and gve_gstrings_priv_flags only has one element.)
.../fortify-string.h:562:4: warning: call to '__read_overflow2_field' declared with 'warning' attribute: detected read beyond size of field (2nd parameter); maybe use struct_group()? [-Wattribute-warning]
562 | __read_overflow2_field(q_size_field, size);
| ^
.../fortify-string.h:562:4: warning: call to '__read_overflow2_field' declared with 'warning' attribute: detected read beyond size of field (2nd parameter); maybe use struct_group()? [-Wattribute-warning]
Likewise, the same changes resolve the same problems flagged by Smatch.
.../gve_ethtool.c:100 gve_get_strings() error: __builtin_memcpy() '*gve_gstrings_main_stats' too small (32 vs 576)
.../gve_ethtool.c:120 gve_get_strings() error: __builtin_memcpy() '*gve_gstrings_adminq_stats' too small (32 vs 512)
Compile tested only.
Reviewed-by: Shailend Chand <shailend@google.com>
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Signed-off-by: Simon Horman <horms@kernel.org>
Acked-by: Justin Stitt <justinstitt@google.com>
Link: https://lore.kernel.org/r/20240508-gve-comma-v2-2-1ac919225f13@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Although it does not seem to have any untoward side-effects,
the use of ';' to separate to assignments seems more appropriate than ','.
Flagged by clang-18 -Wcomma
No functional change intended.
Compile tested only.
Reviewed-by: Shailend Chand <shailend@google.com>
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Signed-off-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240508-gve-comma-v2-1-1ac919225f13@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Slow machines can delay scheduling of the packets for milliseconds.
Increase the delay to 8ms if KSFT_MACHINE_SLOW. Try to limit the
variability by moving setsockopts earlier (before we read time).
This fixes the "TXTIME rel" failures on debug kernels, like:
Case ICMPv4 - TXTIME rel returned '', expected 'OK'
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240510005705.43069-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On slow machines the SND timestamp sometimes doesn't arrive before
we quit. The test only waits as long as the packet delay, so it's
easy for a race condition to happen.
Double the wait but do a bit of polling, once the SND timestamp
arrives there's no point to wait any longer.
This fixes the "TXTIME abs" failures on debug kernels, like:
Case ICMPv4 - TXTIME abs returned '', expected 'OK'
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240510005705.43069-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=aPYm
-----END PGP SIGNATURE-----
Merge tag 'gtp-24-05-07' of git://git.kernel.org/pub/scm/linux/kernel/git/pablo/gtp
Pablo neira Ayuso says:
====================
gtp pull request 24-05-07
This v3 includes:
- fix for clang uninitialized variable per Jakub.
- address Smatch and Coccinelle reports per Simon
- remove inline in new IPv6 support per Simon
- fix memleaks in netlink control plane per Simon
-o-
The following patchset contains IPv6 GTP driver support for net-next,
this also includes IPv6 over IPv4 and vice-versa:
Patch #1 removes a unnecessary stack variable initialization in the
socket routine.
Patch #2 deals with GTP extension headers. This variable length extension
header to decapsulate packets accordingly. Otherwise, packets are
dropped when these extension headers are present which breaks
interoperation with other non-Linux based GTP implementations.
Patch #3 prepares for IPv6 support by moving IPv4 specific fields in PDP
context objects to a union.
Patch #4 adds IPv6 support while retaining backward compatibility.
Three new attributes allows to declare an IPv6 GTP tunnel
GTPA_FAMILY, GTPA_PEER_ADDR6 and GTPA_MS_ADDR6 as well as
IFLA_GTP_LOCAL6 to declare the IPv6 GTP UDP socket. Up to this
patch, only IPv6 outer in IPv6 inner is supported.
Patch #5 uses IPv6 address /64 prefix for UE/MS in the inner headers.
Unlike IPv4, which provides a 1:1 mapping between UE/MS,
IPv6 tunnel encapsulates traffic for /64 address as specified
by 3GPP TS. Patch has been split from Patch #4 to highlight
this behaviour.
Patch #6 passes up IPv6 link-local traffic, such as IPv6 SLAAC, for
handling to userspace so they are handled as control packets.
Patch #7 prepares to allow for GTP IPv4 over IPv6 and vice-versa by
moving IP specific debugging out of the function to build
IPv4 and IPv6 GTP packets.
Patch #8 generalizes TOS/DSCP handling following similar approach as
in the existing iptunnel infrastructure.
Patch #9 adds a helper function to build an IPv4 GTP packet in the outer
header.
Patch #10 adds a helper function to build an IPv6 GTP packet in the outer
header.
Patch #11 adds support for GTP IPv4-over-IPv6 and vice-versa.
Patch #12 allows to use the same TID/TEID (tunnel identifier) for inner
IPv4 and IPv6 packets for better UE/MS dual stack integration.
This series integrates with the osmocom.org project CI and TTCN-3 test
infrastructure (Oliver Smith) as well as the userspace libgtpnl library.
Thanks to Harald Welte, Oliver Smith and Pau Espin for reviewing and
providing feedback through the osmocom.org redmine platform to make this
happen.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
In IPv6, ipv6_rcv_core will parse the hop-by-hop type extension header and increase skb->transport_header by one extension header length.
But if there are more other extension headers like fragment header at this time, the skb->transport_header points to the second extension header,
not the transport layer header or the first extension header.
This will result in the start and nexthdrp variable not pointing to the same position in ipv6frag_thdr_trunced,
and ipv6_skip_exthdr returning incorrect offset and frag_off.Sometimes,the length of the last sharded packet is smaller than the calculated incorrect offset, resulting in packet loss.
We can use network header to offset and calculate the correct position to solve this problem.
Fixes: 9d9e937b1c (ipv6/netfilter: Discard first fragment not including all headers)
Signed-off-by: Gao Xingwang <gaoxingwang1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
DCCP is going away soon, and had no twsk_unique() method.
We can directly call tcp_twsk_unique() for TCP sockets.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20240507164140.940547-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Applications are sensitive to long network latency, particularly
heartbeat monitoring ones. Longer the tx timeout recovery higher the
risk with such applications on a production machines. This patch
remedies, yet honoring device set tx timeout.
Modify watchdog next timeout to be shorter than the device specified.
Compute the next timeout be equal to device watchdog timeout less the
how long ago queue stop had been done. At next watchdog timeout tx
timeout handler is called into if still in stopped state. Either called
or not called, restore the watchdog timeout back to device specified.
Signed-off-by: Praveen Kumar Kannoju <praveen.kannoju@oracle.com>
Link: https://lore.kernel.org/r/20240508133617.4424-1-praveen.kannoju@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a simple test for the epoll busy poll ioctls, using the kernel
selftest harness.
This test ensures that the ioctls have the expected return codes and
that the kernel properly gets and sets epoll busy poll parameters.
The test can be expanded in the future to do real busy polling (provided
another machine to act as the client is available).
Signed-off-by: Joe Damato <jdamato@fastly.com>
Link: https://lore.kernel.org/r/20240508184008.48264-1-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
35d92abfba ("net: hns3: fix kernel crash when devlink reload during initialization")
2a1a1a7b5f ("net: hns3: add command queue trace for hns3")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The bridge patch is actually a follow-up to a recent fix in the same
area. We have a pending v6.8 AF_UNIX regression; it should be solved
soon, but not in time for this PR.
Current release - regressions:
- eth: ks8851: Queue RX packets in IRQ handler instead of disabling BHs
- net: bridge: fix corrupted ethernet header on multicast-to-unicast
Current release - new code bugs:
- xfrm: fix possible bad pointer derferencing in error path
Previous releases - regressionis:
- core: fix out-of-bounds access in ops_init
- ipv6:
- fix potential uninit-value access in __ip6_make_skb()
- fib6_rules: avoid possible NULL dereference in fib6_rule_action()
- tcp: use refcount_inc_not_zero() in tcp_twsk_unique().
- rtnetlink: correct nested IFLA_VF_VLAN_LIST attribute validation
- rxrpc: fix congestion control algorithm
- bluetooth:
- l2cap: fix slab-use-after-free in l2cap_connect()
- msft: fix slab-use-after-free in msft_do_close()
- eth: hns3: fix kernel crash when devlink reload during initialization
- eth: dsa: mv88e6xxx: add phylink_get_caps for the mv88e6320/21 family
Previous releases - always broken:
- xfrm: preserve vlan tags for transport mode software GRO
- tcp: defer shutdown(SEND_SHUTDOWN) for TCP_SYN_RECV sockets
- eth: hns3: keep using user config after hardware reset
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=qYKQ
-----END PGP SIGNATURE-----
Merge tag 'net-6.9-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bluetooth and IPsec.
The bridge patch is actually a follow-up to a recent fix in the same
area. We have a pending v6.8 AF_UNIX regression; it should be solved
soon, but not in time for this PR.
Current release - regressions:
- eth: ks8851: Queue RX packets in IRQ handler instead of disabling
BHs
- net: bridge: fix corrupted ethernet header on multicast-to-unicast
Current release - new code bugs:
- xfrm: fix possible bad pointer derferencing in error path
Previous releases - regressionis:
- core: fix out-of-bounds access in ops_init
- ipv6:
- fix potential uninit-value access in __ip6_make_skb()
- fib6_rules: avoid possible NULL dereference in fib6_rule_action()
- tcp: use refcount_inc_not_zero() in tcp_twsk_unique().
- rtnetlink: correct nested IFLA_VF_VLAN_LIST attribute validation
- rxrpc: fix congestion control algorithm
- bluetooth:
- l2cap: fix slab-use-after-free in l2cap_connect()
- msft: fix slab-use-after-free in msft_do_close()
- eth: hns3: fix kernel crash when devlink reload during
initialization
- eth: dsa: mv88e6xxx: add phylink_get_caps for the mv88e6320/21
family
Previous releases - always broken:
- xfrm: preserve vlan tags for transport mode software GRO
- tcp: defer shutdown(SEND_SHUTDOWN) for TCP_SYN_RECV sockets
- eth: hns3: keep using user config after hardware reset"
* tag 'net-6.9-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (47 commits)
net: dsa: mv88e6xxx: read cmode on mv88e6320/21 serdes only ports
net: dsa: mv88e6xxx: add phylink_get_caps for the mv88e6320/21 family
net: hns3: fix kernel crash when devlink reload during initialization
net: hns3: fix port vlan filter not disabled issue
net: hns3: use appropriate barrier function after setting a bit value
net: hns3: release PTP resources if pf initialization failed
net: hns3: change type of numa_node_mask as nodemask_t
net: hns3: direct return when receive a unknown mailbox message
net: hns3: using user configure after hardware reset
net/smc: fix neighbour and rtable leak in smc_ib_find_route()
ipv6: prevent NULL dereference in ip6_output()
hsr: Simplify code for announcing HSR nodes timer setup
ipv6: fib6_rules: avoid possible NULL dereference in fib6_rule_action()
dt-bindings: net: mediatek: remove wrongly added clocks and SerDes
rxrpc: Only transmit one ACK per jumbo packet received
rxrpc: Fix congestion control algorithm
selftests: test_bridge_neigh_suppress.sh: Fix failures due to duplicate MAC
ipv6: Fix potential uninit-value access in __ip6_make_skb()
net: phy: marvell-88q2xxx: add support for Rev B1 and B2
appletalk: Improve handling of broadcast packets
...
- clear stale KASan stack poison when a CPU resumes
-----BEGIN PGP SIGNATURE-----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=qmWM
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux
Pull ARM fix from Russell King:
- clear stale KASan stack poison when a CPU resumes
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux:
ARM: 9381/1: kasan: clear stale stack poison
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCZjwicQAKCRBZ7Krx/gZQ
67WgAP4iDssAVApazVvOUecQBtOd6xBvQUf1k3acMKa03hcdwAEAmM8qN0MpYUkz
MyVA6oRvC8selaWh62eXamWBgjc1Rwo=
=jLRy
-----END PGP SIGNATURE-----
Merge tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull dentry leak fix from Al Viro:
"Dentry leak fix in the qibfs driver that I forgot to send a pull
request for ;-/
My apologies - it actually sat in vfs.git#fixes for more than two
months..."
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
qibfs: fix dentry leak
Some l2tp providers will use 1701 as origin port and open several
tunnels for the same origin and target. On the Linux side, this
may mean opening several sockets, but then trafic will go to only
one of them, losing the trafic for the tunnel of the other socket
(or leaving it up to userland, consuming a lot of cpu%).
This can also happen when the l2tp provider uses a cluster, and
load-balancing happens to migrate from one origin IP to another one,
for which a socket was already established. Managing reassigning
tunnels from one socket to another would be very hairy for userland.
Lastly, as documented in l2tpconfig(1), as client it may be necessary
to use 1701 as origin port for odd firewalls reasons, which could
prevent from establishing several tunnels to a l2tp server, for the
same reason: trafic would get only on one of the two sockets.
With the V2 protocol it is however easy to route trafic to the proper
tunnel, by looking up the tunnel number in the network namespace. This
fixes the three cases altogether.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Link: https://lore.kernel.org/r/20240506215336.1470009-1-samuel.thibault@ens-lyon.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
On the mv88e6320 and 6321 switch family, port 0/1 are serdes only ports.
Modified the mv88e6352_get_port4_serdes_cmode function to pass a port
number since the register set of the 6352 is equal on the 6320/21.
Signed-off-by: Steffen Bätz <steffen@innosonix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20240508072944.54880-3-steffen@innosonix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
As of commit de5c9bf40c ("net: phylink: require supported_interfaces to
be filled")
Marvell 88e6320/21 switches fail to be probed:
...
mv88e6085 30be0000.ethernet-1:00: phylink: error: empty supported_interfaces
error creating PHYLINK: -22
...
The problem stems from the use of mv88e6185_phylink_get_caps() to get
the device capabilities.
Since there are serdes only ports 0/1 included, create a new dedicated
phylink_get_caps for the 6320 and 6321 to properly support their
set of capabilities.
Fixes: de5c9bf40c ("net: phylink: require supported_interfaces to be filled")
Signed-off-by: Steffen Bätz <steffen@innosonix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20240508072944.54880-2-steffen@innosonix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The devlink reload process will access the hardware resources,
but the register operation is done before the hardware is initialized.
So, processing the devlink reload during initialization may lead to kernel
crash.
This patch fixes this by registering the devlink after
hardware initialization.
Fixes: cd6242991d ("net: hns3: add support for registering devlink for VF")
Fixes: 93305b77ff ("net: hns3: fix kernel crash when devlink reload during pf initialization")
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
According to hardware limitation, for device support modify
VLAN filter state but not support bypass port VLAN filter,
it should always disable the port VLAN filter. but the driver
enables port VLAN filter when initializing, if there is no
VLAN(except VLAN 0) id added, the driver will disable it
in service task. In most time, it works fine. But there is
a time window before the service task shceduled and net device
being registered. So if user adds VLAN at this time, the driver
will not update the VLAN filter state, and the port VLAN filter
remains enabled.
To fix the problem, if support modify VLAN filter state but not
support bypass port VLAN filter, set the port vlan filter to "off".
Fixes: 184cd221a8 ("net: hns3: disable port VLAN filter when support function level VLAN filter control")
Fixes: 2ba306627f ("net: hns3: add support for modify VLAN filter state")
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
There is a memory barrier in followed case. When set the port down,
hclgevf_set_timmer will set DOWN in state. Meanwhile, the service task has
different behaviour based on whether the state is DOWN. Thus, to make sure
service task see DOWN, use smp_mb__after_atomic after calling set_bit().
CPU0 CPU1
========================== ===================================
hclgevf_set_timer_task() hclgevf_periodic_service_task()
set_bit(DOWN,state) test_bit(DOWN,state)
pf also has this issue.
Fixes: ff200099d2 ("net: hns3: remove unnecessary work in hclgevf_main")
Fixes: 1c6dfe6fc6 ("net: hns3: remove mailbox and reset work in hclge_main")
Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
During the PF initialization process, hclge_update_port_info may return an
error code for some reason. At this point, the ptp initialization has been
completed. To void memory leaks, the resources that are applied by ptp
should be released. Therefore, when hclge_update_port_info returns an error
code, hclge_ptp_uninit is called to release the corresponding resources.
Fixes: eaf83ae59e ("net: hns3: add querying fec ability from firmware")
Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
It provides nodemask_t to describe the numa node mask in kernel. To
improve transportability, change the type of numa_node_mask as nodemask_t.
Fixes: 38caee9d3e ("net: hns3: Add support of the HNAE3 framework")
Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently, the driver didn't return when receive a unknown
mailbox message, and continue checking whether need to
generate a response. It's unnecessary and may be incorrect.
Fixes: bb5790b71b ("net: hns3: refactor mailbox response scheme between PF and VF")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When a reset occurring, it's supposed to recover user's configuration.
Currently, the port info(speed, duplex and autoneg) is stored in hclge_mac
and will be scheduled updated. Consider the case that reset was happened
consecutively. During the first reset, the port info is configured with
a temporary value cause the PHY is reset and looking for best link config.
Second reset start and use pervious configuration which is not the user's.
The specific process is as follows:
+------+ +----+ +----+
| USER | | PF | | HW |
+---+--+ +-+--+ +-+--+
| ethtool --reset | |
+------------------->| reset command |
| ethtool --reset +-------------------->|
+------------------->| +---+
| +---+ | |
| | |reset currently | | HW RESET
| | |and wait to do | |
| |<--+ | |
| | send pervious cfg |<--+
| | (1000M FULL AN_ON) |
| +-------------------->|
| | read cfg(time task) |
| | (10M HALF AN_OFF) +---+
| |<--------------------+ | cfg take effect
| | reset command |<--+
| +-------------------->|
| | +---+
| | send pervious cfg | | HW RESET
| | (10M HALF AN_OFF) |<--+
| +-------------------->|
| | read cfg(time task) |
| | (10M HALF AN_OFF) +---+
| |<--------------------+ | cfg take effect
| | | |
| | read cfg(time task) |<--+
| | (10M HALF AN_OFF) |
| |<--------------------+
| | |
v v v
To avoid aboved situation, this patch introduced req_speed, req_duplex,
req_autoneg to store user's configuration and it only be used after
hardware reset and to recover user's configuration
Fixes: f5f2b3e4dc ("net: hns3: add support for imp-controlled PHYs")
Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The third, and most likely the last, "new features" pull request for
v6.10 with changes both in stack and in drivers. In ath12k and rtw89
we disabled Wireless Extensions just like with iwlwifi earlier. Wi-Fi
7 devices will not support Wireless Extensions (WEXT) anymore so if
someone is still using the legacy WEXT interface it's time to switch
to nl80211 now!
We merged wireless into wireless-next as we decided not to send a
wireless pull request to v6.9 this late in the cycle. Also an
immutable branch with MHI subsystem was merged to get ath11k and
ath12k hibernation working.
Major changes:
mac80211/cfg80211
* handle color change per link
mt76
* mt7921 LED control
* mt7925 EHT radiotap support
* mt7920e PCI support
ath12k
* debugfs support
* dfs_simulate_radar debugfs file
* disable Wireless Extensions
* suspend and hibernation support
* ACPI support
* refactoring in preparation of multi-link support
ath11k
* support hibernation (required changes in qrtr and MHI subsystems)
* ieee80211-freq-limit Device Tree property support
ath10k
* firmware-name Device Tree property support
rtw89
* complete features of new WiFi 7 chip 8922AE including BT-coexistence
and WoWLAN
* use BIOS ACPI settings to set TX power and channels
* disable Wireless Extensios on Wi-Fi 7 devices
iwlwifi
* block_esr debugfs file
* support again firmware API 90 (was reverted earlier)
* provide channel survey information for Automatic Channel Selection (ACS)
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmY7aisRHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZuILQgAmcfU9EJca08qqI2dvcu/X3C/WBVaOQUC
3sdvdGfaO9bTXDjbt0KfmhYNc0BHIM1Jzbegmhe80k6/4cnkWh0JgGZbgMMZGL+V
KI8ejbjY1BpfReApiL37DzSUWh176u4jNhUhifRXrLYxBkoZ5goUX8u6meMZHuj4
8EBfW7xGhtmMn2Po+bUYNXsczWR+mcfxfNF3vfyYIIsuJz2wbONcRuc0Hvq1mHmC
Ebtq7myY/SQvLtILGZxwAhdgHH8AgCN9R5WpzcCHze8t8xmmt4CjdwS6BGwmaBNM
NoGnzHvDG0u+dUYcY/x1tiky9PKRjMtMW+GvYPUvjy5j3nDDXeq51w==
=tf9q
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2024-05-08' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.10
The third, and most likely the last, "new features" pull request for
v6.10 with changes both in stack and in drivers. In ath12k and rtw89
we disabled Wireless Extensions just like with iwlwifi earlier. Wi-Fi
7 devices will not support Wireless Extensions (WEXT) anymore so if
someone is still using the legacy WEXT interface it's time to switch
to nl80211 now!
We merged wireless into wireless-next as we decided not to send a
wireless pull request to v6.9 this late in the cycle. Also an
immutable branch with MHI subsystem was merged to get ath11k and
ath12k hibernation working.
Major changes:
mac80211/cfg80211
* handle color change per link
mt76
* mt7921 LED control
* mt7925 EHT radiotap support
* mt7920e PCI support
ath12k
* debugfs support
* dfs_simulate_radar debugfs file
* disable Wireless Extensions
* suspend and hibernation support
* ACPI support
* refactoring in preparation of multi-link support
ath11k
* support hibernation (required changes in qrtr and MHI subsystems)
* ieee80211-freq-limit Device Tree property support
ath10k
* firmware-name Device Tree property support
rtw89
* complete features of new WiFi 7 chip 8922AE including BT-coexistence
and WoWLAN
* use BIOS ACPI settings to set TX power and channels
* disable Wireless Extensios on Wi-Fi 7 devices
iwlwifi
* block_esr debugfs file
* support again firmware API 90 (was reverted earlier)
* provide channel survey information for Automatic Channel Selection (ACS)
* tag 'wireless-next-2024-05-08' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (214 commits)
wifi: mwl8k: initialize cmd->addr[] properly
wifi: iwlwifi: Ensure prph_mac dump includes all addresses
wifi: iwlwifi: mvm: don't request statistics in restart
wifi: iwlwifi: mvm: exit EMLSR if secondary link is not used
wifi: iwlwifi: mvm: add beacon template version 14
wifi: iwlwifi: mvm: align UATS naming with firmware
wifi: iwlwifi: Force SCU_ACTIVE for specific platforms
wifi: iwlwifi: mvm: record and return channel survey information
wifi: iwlwifi: mvm: add the firmware API for channel survey
wifi: iwlwifi: mvm: Fix race in scan completion
wifi: iwlwifi: mvm: Add a print for invalid link pair due to bandwidth
wifi: iwlwifi: mvm: add a debugfs for reading EMLSR blocking reasons
wifi: iwlwifi: mvm: Add active EMLSR blocking reasons prints
wifi: iwlwifi: bump FW API to 90 for BZ/SC devices
wifi: iwlwifi: mvm: fix primary link setting
wifi: iwlwifi: mvm: use already determined cmd_id
wifi: iwlwifi: mvm: don't reset link selection during restart
wifi: iwlwifi: Print EMLSR states name
wifi: iwlwifi: mvm: Block EMLSR when a p2p/softAP vif is active
wifi: iwlwifi: mvm: fix typo in debug print
...
====================
Link: https://lore.kernel.org/r/20240508120726.85A10C113CC@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
David Wei says:
====================
netdevsim: add NAPI support
Add NAPI support to netdevsim and register its Rx queues with NAPI
instances. Then add a selftest using the new netdev Python selftest
infra to exercise the existing Netdev Netlink API, specifically the
queue-get API.
This expands test coverage and further fleshes out netdevsim as a test
device. It's still my goal to make it useful for testing things like
flow steering and ZC Rx.
====================
Link: https://lore.kernel.org/r/20240507163228.2066817-1-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a selftest for netdev generic netlink. For now there is only a
single test that exercises the `queue-get` API.
The test works with netdevsim by default or with a real device by
setting NETIF.
Add a timeout param to cmd() since ethtool -L can take a long time on
real devices.
Signed-off-by: David Wei <dw@davidwei.uk>
Link: https://lore.kernel.org/r/20240507163228.2066817-3-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add NAPI support to netdevim, similar to veth.
* Add a nsim_rq rx queue structure to hold a NAPI instance and a skb
queue.
* During xmit, store the skb in the peer skb queue and schedule NAPI.
* During napi_poll(), drain the skb queue and pass up the stack.
* Add assoc between rxq and NAPI instance using netif_queue_set_napi().
Signed-off-by: David Wei <dw@davidwei.uk>
Link: https://lore.kernel.org/r/20240507163228.2066817-2-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Run tools/testing/selftest/net/csum.c as part of drv-net.
This binary covers multiple scenarios, based on arguments given,
for both IPv4 and IPv6:
- Accept UDP correct checksum
- Detect UDP invalid checksum
- Accept TCP correct checksum
- Detect TCP invalid checksum
- Transmit UDP: basic checksum offload
- Transmit UDP: zero checksum conversion
The test direction is reversed between receive and transmit tests, so
that the NIC under test is always the local machine.
In total this adds up to 12 testcases, with more to follow. For
conciseness, I replaced individual functions with a function factory.
Also detect hardware offload feature availability using Ethtool
netlink and skip tests when either feature is off. This need may be
common for offload feature tests and eventually deserving of a thin
wrapper in lib.py.
Missing are the PF_PACKET based send tests ('-P'). These use
virtio_net_hdr to program hardware checksum offload. Which requires
looking up the local MAC address and (harder) the MAC of the next hop.
I'll have to give it some though how to do that robustly and where
that code would belong.
Tested:
make -C tools/testing/selftests/ \
TARGETS="drivers/net drivers/net/hw" \
install INSTALL_PATH=/tmp/ksft
cd /tmp/ksft
sudo NETIF=ens4 REMOTE_TYPE=ssh \
REMOTE_ARGS="root@10.40.0.2" \
LOCAL_V4="10.40.0.1" \
REMOTE_V4="10.40.0.2" \
./run_kselftest.sh -t drivers/net/hw:csum.py
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240507154216.501111-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Up till now the code to start HSR announce timer, which triggers sending
supervisory frames, was assuming that hsr_netdev_notify() would be called
at least twice for hsrX interface. This was required to have different
values for old and current values of network device's operstate.
This is problematic for a case where hsrX interface is already in the
operational state when hsr_netdev_notify() is called, so timer is not
configured to trigger and as a result the hsrX is not sending supervisory
frames to HSR ring.
This error has been discovered when hsr_ping.sh script was run. To be
more specific - for the hsr1 and hsr2 the hsr_netdev_notify() was
called at least twice with different IF_OPER_{LOWERDOWN|DOWN|UP} states
assigned in hsr_check_carrier_and_operstate(hsr). As a result there was
no issue with sending supervisory frames.
However, with hsr3, the notify function was called only once with
operstate set to IF_OPER_UP and timer responsible for triggering
supervisory frames was not fired.
The solution is to use netif_oper_up() and netif_running() helper
functions to assess if network hsrX device is up.
Only then, when the timer is not already pending, it is started.
Otherwise it is deactivated.
Fixes: f421436a59 ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)")
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240507111214.3519800-1-lukma@denx.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
route_dumpit() already relies on RCU, RTNL is not needed.
Also change return value at the end of a dump.
This allows NLMSG_DONE to be appended to the current
skb at the end of a dump, saving a couple of recvmsg()
system calls.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Remi Denis-Courmont <courmisch@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240507121748.416287-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Various ndo_set_config() methods can change dev->if_port
dev->if_port is going to be read locklessly from
rtnl_fill_link_ifmap().
Add corresponding WRITE_ONCE() on writer sides.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240507184144.1230469-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is no need to use this_cpu_ptr(dst_cache->cache) twice.
Compiler is unable to optimize the second call, because of
per-cpu constraints.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20240507132717.627518-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
dst_cache->reset_ts is read or written locklessly,
add READ_ONCE() and WRITE_ONCE() annotations.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20240507132000.614591-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Several clocks as well as both sgmiisys phandles were added by mistake
to the Ethernet bindings for MT7988. Also, the total number of clocks
didn't match with the actual number of items listed.
This happened because the vendor driver which served as a reference uses
a high number of syscon phandles to access various parts of the SoC
which wasn't acceptable upstream. Hence several parts which have never
previously been supported (such SerDes PHY and USXGMII PCS) are going to
be implemented by separate drivers. As a result the device tree will
look much more sane.
Quickly align the bindings with the upcoming reality of the drivers
actually adding support for the remaining Ethernet-related features of
the MT7988 SoC.
Fixes: c94a9aabec ("dt-bindings: net: mediatek,net: add mt7988-eth binding")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/1569290b21cc787a424469ed74456a7e976b102d.1715084326.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a compatible property specific to IPQ9574. This should be used
along with the IPQ4019 compatible. This second compatible serves the
same purpose as the ipq{5,6,8} compatibles. This is to indicate that
the clocks properties are required.
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240507024758.2810514-1-mr.nuke.me@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Ee/V
-----END PGP SIGNATURE-----
Merge tag '6.9-rc7-ksmbd-fixes' of git://git.samba.org/ksmbd
Pull smb server fixes from Steve French:
"Five ksmbd server fixes, all also for stable
- Three fixes related to SMB3 leases (fixes two xfstests, and a
locking issue)
- Unitialized variable fix
- Socket creation fix when bindv6only is set"
* tag '6.9-rc7-ksmbd-fixes' of git://git.samba.org/ksmbd:
ksmbd: do not grant v2 lease if parent lease key and epoch are not set
ksmbd: use rwsem instead of rwlock for lease break
ksmbd: avoid to send duplicate lease break notifications
ksmbd: off ipv6only for both ipv4/ipv6 binding
ksmbd: fix uninitialized symbol 'share' in smb2_tree_connect()
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSQHSd0lITzzeNWNm3h3BK/laaZPAUCZjsr0QAKCRDh3BK/laaZ
PLrpAP9Y1Kz3gSSH1wqDJ9+XzQZdm4dSInMP2Pe47BvSGG2YlAEAwmccoyIoiM58
qvHPETImNxIRTAVZdiBM3W4S3hnzCwc=
=SPoy
-----END PGP SIGNATURE-----
Merge tag 'fuse-fixes-6.9-final' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse fixes from Miklos Szeredi:
"Two one-liner fixes for issues introduced in -rc1"
* tag 'fuse-fixes-6.9-final' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
virtiofs: include a newline in sysfs tag
fuse: verify zero padding in fuse_backing_map
- Fix xfstests generic/013 test failure with dirsync mount option.
- Initialize the reserved fields of deleted file and stream extension
dentries to zero.
-----BEGIN PGP SIGNATURE-----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=zS+L
-----END PGP SIGNATURE-----
Merge tag 'exfat-for-6.9-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat
Pull exfat fixes from Namjae Jeon:
- Fix xfstests generic/013 test failure with dirsync mount option
- Initialize the reserved fields of deleted file and stream extension
dentries to zero
* tag 'exfat-for-6.9-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
exfat: zero the reserved fields of file and stream extension dentries
exfat: fix timing of synchronizing bitmap and inode
- Various syzbot fixes; mainly small gaps in validation
- Fix an integer overflow in fiemap() which was preventing filefrag from
returning the full list of extents
- Fix a refcounting bug on the device refcount, turned up by new
assertions in the development branch
- Fix a device removal/readd bug; write_super() was repeatedly dropping
and retaking bch_dev->io_ref references
-----BEGIN PGP SIGNATURE-----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=rlea
-----END PGP SIGNATURE-----
Merge tag 'bcachefs-2024-05-07.2' of https://evilpiepirate.org/git/bcachefs
Pull bcachefs fixes from Kent Overstreet:
- Various syzbot fixes; mainly small gaps in validation
- Fix an integer overflow in fiemap() which was preventing filefrag
from returning the full list of extents
- Fix a refcounting bug on the device refcount, turned up by new
assertions in the development branch
- Fix a device removal/readd bug; write_super() was repeatedly dropping
and retaking bch_dev->io_ref references
* tag 'bcachefs-2024-05-07.2' of https://evilpiepirate.org/git/bcachefs:
bcachefs: Add missing sched_annotate_sleep() in bch2_journal_flush_seq_async()
bcachefs: Fix race in bch2_write_super()
bcachefs: BCH_SB_LAYOUT_SIZE_BITS_MAX
bcachefs: Add missing skcipher_request_set_callback() call
bcachefs: Fix snapshot_t() usage in bch2_fs_quota_read_inode()
bcachefs: Fix shift-by-64 in bformat_needs_redo()
bcachefs: Guard against unknown k.k->type in __bkey_invalid()
bcachefs: Add missing validation for superblock section clean
bcachefs: Fix assert in bch2_alloc_v4_invalid()
bcachefs: fix overflow in fiemap
bcachefs: Add a better limit for maximum number of buckets
bcachefs: Fix lifetime issue in device iterator helpers
bcachefs: Fix bch2_dev_lookup() refcounting
bcachefs: Initialize bch_write_op->failed in inline data path
bcachefs: Fix refcount put in sb_field_resize error path
bcachefs: Inodes need extra padding for varint_decode_fast()
bcachefs: Fix early error path in bch2_fs_btree_key_cache_exit()
bcachefs: bucket_pos_to_bp_noerror()
bcachefs: don't free error pointers
bcachefs: Fix a scheduler splat in __bch2_next_write_buffer_flush_journal_buf()
These are a couple of last minute fixes that came in over the
previous week, addressing:
- A pin configuration bug on a qualcomm board that caused
issues with ethernet and mmc.
- Two minor code fixes for misleading console output in the
microchip firmware driver.
- A build warning in the sifive cache driver
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmY6IboACgkQYKtH/8kJ
Uics9A/+P+7zV4zu0I+6AnfPbfbPbkbd9Lo1DOse/Qjl9RyccMIMBH0PsSnKB+zR
tetFwqfuqPANLddeV2ou63CjRpjrsg2u/+Nc5vCizT1XYTxClCvf1cQ4q3HWLZnW
JvNxS4v2ynHcbf1kCuRBwl8yAzUT4cXBaJp2WgoPCBokRlA4rERcoE6nkR7ZExOt
wOFkOdSBIoD90Um6QgflM+OCw5rCfwyn2lcFrVf/e4JB7BuTGUU4bK0vmIMD/xO7
SxfGXmx9lGQlOjSBvdhMQqC33YOEeMjzUEvbpNOiNNN2eSHBMeuUISe0IPwyWQTO
EdFmDKQTk/Onwr+Br0dStgcF/nl1A5JvgFuBFEUYGDpRtWn76Cj4ZCmOfStDe56y
lrX8qeve7rK7zd52pCl/04hVtRXgxTJ//RCru3FQxQKnHQkjWrPnGDqz98iTLNUL
GBJCzWglxcvlyR2h3+SeQPkEOxnQCzi1FyxEXit+1dGTeUGK8sBF6KEiHYr0lLLW
+HGEfkT2l1a/I/CUn6MwNANXrt+vcDOElY/THUvvKXD02T3jbLkHLY99K11NXMGR
p+/yCL/dGAQIBEEWosRJj4tK0TaUmebnr8NSlJ20dM+UL1Fvv5CX3B3rydmD2m9P
26pi0ceevjqO2jZ3mBkoHKVLJgJn4x+9Pui4kD6qZsZy5hOdnuE=
=CxgC
-----END PGP SIGNATURE-----
Merge tag 'soc-fixes-6.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"These are a couple of last minute fixes that came in over the previous
week, addressing:
- A pin configuration bug on a qualcomm board that caused issues with
ethernet and mmc
- Two minor code fixes for misleading console output in the microchip
firmware driver
- A build warning in the sifive cache driver"
* tag 'soc-fixes-6.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
firmware: microchip: clarify that sizes and addresses are in hex
firmware: microchip: don't unconditionally print validation success
arm64: dts: qcom: sa8155p-adp: fix SDHC2 CD pin configuration
cache: sifive_ccache: Silence unused variable warning
