Commit graph

27 commits

Author SHA1 Message Date
Aurelien Jarno
2d8d4fdf78 SSB PCI core driver: use new SPROM data structure
Switch the SSB PCI core driver to the new SPROM data structure now that
the old one has been removed.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Acked-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-28 09:29:58 -05:00
Alexey Zaytsev
c7084535c9 Use a separate config option for the b43 pci to ssb bridge.
The bridge code was unnecessary enabled by the b44
driver, but it prevents the bcm43xx driver from
being loaded, as the bridge claims the same pci ids.

Now we enable the birdge only if the b43{legacy}
drivers are selected.

Signed-off-by: Alexey Zaytsev <alexey.zaytsev@gmail.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-28 09:13:10 -05:00
Michael Buesch
fc71acc846 ssb: Fix support for PCI devices behind a SSB->PCI bridge
We must pin all resources and make sure the PCI subsystem
won't relocate us, as the addresses are hardwired into hardware.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-20 20:11:55 -05:00
Michael Buesch
7cb4461520 ssb: Fix pcicore cardbus mode
This fixes the pcicore driver to not die a horrible
crash death when inserting a cardbus card.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-20 20:11:49 -05:00
Michael Buesch
53521d8c90 ssb: Make the GPIO API reentrancy safe
This fixes the GPIO API to be reentrancy safe.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-20 20:11:49 -05:00
Michael Buesch
c2bcbe65fc ssb: Fix the GPIO API
This fixes the GPIO API to be usable.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-20 20:11:49 -05:00
Michael Buesch
42bfad4f71 ssb: Fix watchdog access for devices without a chipcommon
This fixes the SSB watchdog access for devices without a chipcommon.
These devices have the watchdog on the extif.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-20 20:11:49 -05:00
Michael Buesch
58ff70d4fe ssb: Fix serial console on new bcm47xx devices
This fixes the baud settings for new devices
like the Linksys WRT350n.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-20 20:11:48 -05:00
Joe Perches
b8c268d104 drivers/ssb/: Spelling fixes
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
2008-02-03 17:30:25 +02:00
Michael Buesch
af4b745078 ssb: Add boardflags_hi field to the sprom data structure
Add boardflags-high.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:09:52 -08:00
Michael Buesch
ca08a965a6 b43-ssb-bridge: Add PCI ID for BCM43XG
This adds the PCI ID 0x4329 for the BCM43XG.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:09:19 -08:00
Michael Buesch
993e1c780b ssb: Fix PCMCIA lowlevel register access
This fixes lowlevel register access for PCMCIA based devices.

The patch also adds a temporary workaround for the device mac address.
It simply adds generation of a random address. The real SPROM extraction
will follow in another patch.
The temporary workaround will be removed then, but for now it's OK.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:09:16 -08:00
Michael Buesch
e861b98d5e ssb: Fix extraction of values from SPROM
This fixes extraction of some values from the SPROM.
It mainly fixes extraction of antenna related values, which
is needed for another b43 fix sent later.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:09:14 -08:00
Larry Finger
d3c319f9c8 ssb: Remove the old, now unused, data structures
The old, now unused, data structures and SPROM extraction routines
are removed.

Signed-off-by: Larry Finger<Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:04:44 -08:00
Larry Finger
c272ef4403 ssb: Convert to use of the new SPROM structure
In disagreement with the SPROM specs, revision 3 devices appear to have
moved the MAC address.

Change ssb to handle the revision 4 SPROM, which is a different size.
This change in size is handled by adding a new variable to the ssb_sprom
struct and using it whenever possible. For those routines that do not
have access to this structure, a 'u16 size' argument is added.

The new PCI_ID for the BCM4328 is also added.

Testing of the Revision 4 SPROM, which is used on the BCM4328, was done
by Michael Gerdau <mgerdau@tiscali.de>.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:04:41 -08:00
Larry Finger
ac82fab44f ssb: Add new SPROM structure while keeping the old
The SPROM's for various devices utilizing the Sonics Silicon Backplane come
with various revisions. The Revision 2 SPROM inherited the data layout of 1, and
Revision 3 inherited the layout of 2. The first instance of Revision 4 has
now been found in a BCM4328 wireless LAN card. This device does not inherit any
layout from previous versions. Although it was possible to create a data
structure that kept all the old layouts, we decided to start fresh, keep only
those SPROM variables that are used by the drivers that utilize ssb, and to
do the conversion in such a manner that neither compilation or execution will
be affected if a bisection lands in the middle of these changes, while keeping
the patches as small as possible.

In this patch, the sprom structures are changed while maintaining the old ones.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28 15:04:40 -08:00
Michael Buesch
87c4ac841c ssb: Fix probing of PCI cores if PCI and PCIE core is available
This will make sure that always the correct core is selected, even if
there are both a PCI and PCI-E core on a PCI or PCI-E card.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-08 23:30:10 -08:00
Michael Buesch
60d78c4473 ssb: Fix PCMCIA-host lowlevel bus access
This fixes the lowlevel bus access routines for
PCMCIA based devices.

There are still a few issues with register access sideeffects after
this patch. This will be addressed in a later patch.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-11-10 22:01:53 -08:00
Michael Buesch
8d8c90e3fd ssb: Fix initcall ordering
ssb must init after PCI but before the ssb drivers.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Cc: Christian Casteyde <casteyde.christian@free.fr>
Fixes-bug: #9219
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-11-10 21:58:58 -08:00
Ingo Molnar
9be4bfb974 [PATCH] ssb: fix build failure
fix build failure if PCMCIA=m but SSB=y:

drivers/built-in.o: In function `ssb_pcmcia_switch_coreidx':
: undefined reference to `pcmcia_access_configuration_register'

(fix symmetric bug for PCI too.)

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Michael Buesch <mb@bu3sch.de>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-16 21:04:11 -04:00
Felix Fietkau
7007d00cac [PATCH] ssb: Fix a null pointer check in mipscore init
Fix a null pointer check in ssb mipscore init

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Acked-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-16 21:04:11 -04:00
Al Viro
409f243520 missing include in ssb
Using readw() and friends => needs to pull io.h and not all targets are
doing that via indirect chains.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-14 08:53:33 -07:00
Al Viro
7ac0326c3f uevent environment changes fallout
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-14 08:53:33 -07:00
Geert Uytterhoeven
6faf035cf9 ssb bus needs <linux/io.h>
ssb bus needs <linux/io.h>

  linux/drivers/ssb/main.c: In function 'ssb_ssb_read16':
  linux/drivers/ssb/main.c:518: error: implicit declaration of function 'readw'
  linux/drivers/ssb/main.c: In function 'ssb_ssb_read32':
  linux/drivers/ssb/main.c:526: error: implicit declaration of function 'readl'
  linux/drivers/ssb/main.c: In function 'ssb_ssb_write16':
  linux/drivers/ssb/main.c:534: error: implicit declaration of function 'writew'
  linux/drivers/ssb/main.c: In function 'ssb_ssb_write32':
  linux/drivers/ssb/main.c:542: error: implicit declaration of function 'writel'

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-13 09:41:03 -07:00
Michael Buesch
6b9bafec66 [SSB]: Sparse fixes.
This fixes all Sparse warnings in SSB.
No semantics change.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:52:21 -07:00
Michael Buesch
4b402c65a3 [SSB]: Use ioreadX() and iowriteX() for PCI.
On a PCI bus use ioreadX() and iowriteX().
We map the I/O space with pci_iomap(), so we must use the correct
accessor functions, too.
readX() and writeX() are not guaranteed to accept the cookie returned
from pci_iomap() (though, it currently works on most architectures).

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:52:20 -07:00
Michael Buesch
61e115a56d [SSB]: add Sonics Silicon Backplane bus support
SSB is an SoC bus used in a number of embedded devices.  The most
well-known of these devices is probably the Linksys WRT54G, but there
are others as well.  The bus is also used internally on the BCM43xx
and BCM44xx devices from Broadcom.

This patch also includes support for SSB ID tables in modules, so
that SSB drivers can be loaded automatically.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:51:36 -07:00