Commit graph

851 commits

Author SHA1 Message Date
Rafael J. Wysocki
60c07f80b0 Merge branches 'acpica-fixes', 'acpi-video' and 'acpi-processor'
* acpica-fixes:
  ACPICA / Hardware: Fix old register check in acpi_hw_get_access_bit_width()

* acpi-video:
  ACPI / Thermal / video: fix max_level incorrect value

* acpi-processor:
  ACPI / processor: Avoid reserving IO regions too early
2016-06-03 22:35:05 +02:00
Aaron Lu
9f9cd7ee2c ACPI / Thermal / video: fix max_level incorrect value
commit 059500940d (ACPI/video: export acpi_video_get_levels)
mistakenly dropped the correct value of max_level and that caused the
set_level function following failed and the acpi_video backlight interface
didn't get created. Fix this by passing back the correct max_level value.

While at it, also fix the param used in acpi_video_device_lcd_query_levels
where acpi_handle is expected but acpi_video_device is passed.

Fixes: 059500940d (ACPI/video: export acpi_video_get_levels)
Reported-and-tested-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Acked-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-05-30 13:53:09 +02:00
Linus Torvalds
bfb764440d Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux
Pull thermal management updates from Zhang Rui:

 - Introduce generic ADC thermal driver, based on OF thermal (Laxman
   Dewangan)

 - Introduce new thermal driver for Tango chips (Marc Gonzalez)

 - Rockchip driver support for RK3399, RK3366, and some fixes (Caesar
   Wang, Elaine Zhang and Shawn Lin)

 - Add CPU power cooling model to Mediatek thermal driver (Dawei Chien)

 - Wider usage of dev_thermal_zone_of_sensor_register (Eduardo Valentin)

 - TI thermal driver gained a new maintainer (Keerthy).

 - Enabled powerclamp driver by checking CPU feature and package cstate
   counter instead of CPU whitelist (Jacob Pan)

 - Various fixes on thermal governor, OF thermal, Tegra, and RCAR

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (50 commits)
  thermal: tango: initialize TEMPSI_CFG
  thermal: rockchip: use the usleep_range instead of udelay
  thermal: rockchip: add the notes for better reading
  thermal: rockchip: Support RK3366 SoCs in the thermal driver
  thermal: rockchip: handle the power sequence for tsadc controller
  thermal: rockchip: update the tsadc table for rk3399
  thermal: rockchip: fixes the code_to_temp for tsadc driver
  thermal: rockchip: disable thermal->clk in err case
  thermal: tegra: add Tegra132 specific SOC_THERM driver
  thermal: fix ptr_ret.cocci warnings
  thermal: mediatek: Add cpu dynamic power cooling model.
  thermal: generic-adc: Add ADC based thermal sensor driver
  thermal: generic-adc: Add DT binding for ADC based thermal sensor
  thermal: tegra: fix static checker warning
  thermal: tegra: mark PM functions __maybe_unused
  thermal: add temperature sensor support for tango SoC
  thermal: hisilicon: fix IRQ imbalance enabling
  thermal: hisilicon: support to use any sensor
  thermal: rcar: Remove binding docs for r8a7794
  thermal: tegra: add PM support
  ...
2016-05-26 09:23:43 -07:00
Zhang Rui
88ac99063e Merge branches 'thermal-core', 'thermal-intel' and 'thermal-soc' into next 2016-05-18 15:37:08 +08:00
Marc Gonzalez
431c30f74c thermal: tango: initialize TEMPSI_CFG
TEMPSI_CFG is not equal to 0 at reset. It must be initialized.

Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17 07:28:33 -07:00
Caesar Wang
2fe5c1b045 thermal: rockchip: use the usleep_range instead of udelay
Documentation/timers/timers-howto.txt recommends to use
usleep_range on delays > 10usec.
The usleep_range indeed reduces CPU load, since the udelay will busy wait
for enough loop cycles to achieve the desired delay.

Fixes commit b06c52db39fd ("thermal: rockchip:
handle the power sequence for tsadc controller").

Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: Heiko Stuebner <heiko@sntech.de>
Suggested-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17 07:28:33 -07:00
Caesar Wang
678065d5b7 thermal: rockchip: add the notes for better reading
To update the notes for keeping in mind that quickly in case
someone re-read this driver in the future.

Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17 07:28:33 -07:00
Elaine Zhang
1cd6026937 thermal: rockchip: Support RK3366 SoCs in the thermal driver
The RK3366 SoCs have two Temperature Sensors, channel 0 is for CPU
channel 1 is for GPU.

Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17 07:28:32 -07:00
Caesar Wang
b948476327 thermal: rockchip: handle the power sequence for tsadc controller
This adds the grf property to handle the tsadc power sequence on
rockchip some SoCs.

Verified on rk3399 can work with this patch on now.

while true; do grep "" /sys/class/thermal/thermal_zone[0-1]/temp
sleep .5; done
/sys/class/thermal/thermal_zone0/temp:40555
/sys/class/thermal/thermal_zone1/temp:41111
/sys/class/thermal/thermal_zone0/temp:40555
/sys/class/thermal/thermal_zone1/temp:41111
/sys/class/thermal/thermal_zone0/temp:40555
/sys/class/thermal/thermal_zone1/temp:41666
/sys/class/thermal/thermal_zone0/temp:40555
/sys/class/thermal/thermal_zone1/temp:41111
/sys/class/thermal/thermal_zone0/temp:40555
/sys/class/thermal/thermal_zone1/temp:41111
/sys/class/thermal/thermal_zone0/temp:40555

Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17 07:28:32 -07:00
Caesar Wang
f762a35d89 thermal: rockchip: update the tsadc table for rk3399
This patch fixes the incorrect conversion table.
The Code to Temperature mapping is updated based on sillcon results.

Fixes commit b0d70338bc
("thermal: rockchip: Support the RK3399 SoCs in thermal driver").

Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17 07:28:32 -07:00
Caesar Wang
a87dd79761 thermal: rockchip: fixes the code_to_temp for tsadc driver
We should judge the table.id[mid].code insearch algorithm on matter the
adc value increment or decrement.

Or otherwise, the temperature return the incorrect value in some cases.
[    1.438589] adc_val=402,temp=-40000
[    1.438903] adc_val=403,temp=-39375
[    1.439217] adc_val=404,temp=-38750
...
[    1.441102] adc_val=410,temp=-40000
[    1.441416] adc_val=411,temp=-34445
[    1.441737] adc_val=412,temp=-33889
...

Let's fix it right now.

Fixes commit 020ba95dbb ("thermal: rockchip:
Add the sort mode for adc value increment or decrement").

Reported-by: Rocky Hao <rocky.hao@rock-chips.com>
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17 07:28:32 -07:00
Shawn Lin
ab5b52f160 thermal: rockchip: disable thermal->clk in err case
Disable thermal->clk when enabling pclk fails in
resume routine.

Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Caesar Wang <wxt@rock-chips.com>
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17 07:28:32 -07:00
Wei Ni
44cb6a7df1 thermal: tegra: add Tegra132 specific SOC_THERM driver
add Tegra132 specific SOC_THERM driver.

Signed-off-by: Wei Ni <wni@nvidia.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17 07:28:31 -07:00
kbuild test robot
bba07c133f thermal: fix ptr_ret.cocci warnings
drivers/thermal/tango_thermal.c:86:1-3: WARNING: PTR_ERR_OR_ZERO can be used

 Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR

Generated by: scripts/coccinelle/api/ptr_ret.cocci

CC: Marc Gonzalez <marc_gonzalez@sigmadesigns.com>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17 07:28:31 -07:00
Laxman Dewangan
b3aef78f76 thermal: generic-adc: Add ADC based thermal sensor driver
In some of platform, thermal sensors like NCT thermistors are
connected to the one of ADC channel. The temperature is read by
reading the voltage across the sensor resistance via ADC. Lookup
table for ADC read value to temperature is referred to get
temperature. ADC is read via IIO framework.

Add support for thermal sensor driver which read the voltage across
sensor resistance from ADC through IIO framework.

Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17 07:28:31 -07:00
Wei Ni
f350098070 thermal: tegra: fix static checker warning
There has a static checker warning:
warn: variable dereferenced before check 'dev' (see line 222)

Since check 'dev' is unnecessary, so remove this check.

Fixes: ee6d79f202a4 ("thermal: tegra: add thermtrip function")
Signed-off-by: Wei Ni <wni@nvidia.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17 07:28:31 -07:00
Arnd Bergmann
a977c41ec6 thermal: tegra: mark PM functions __maybe_unused
After the PM support has been added to this driver, we get
a harmless warning when that support is disabled at compile
time:

drivers/thermal/tegra/soctherm.c:641:12: error: 'soctherm_resume' defined but not used [-Werror=unused-function]
 static int soctherm_resume(struct device *dev)

This marks the two PM functions as __maybe_unused to shut up
the warning. This is preferred over adding an #ifdef around
them, as it is harder to get wrong, and provides better
compile-time coverage.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: a134b4143b65 ("thermal: tegra: add PM support")
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17 07:28:30 -07:00
Marc Gonzalez
0b58c08b59 thermal: add temperature sensor support for tango SoC
The Tango thermal driver provides support for the primitive temperature
sensor embedded in Tango chips since the SMP8758.

This sensor only generates a 1-bit signal to indicate whether the die
temperature exceeds a programmable threshold.

Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17 07:28:30 -07:00
Leo Yan
469ace07c2 thermal: hisilicon: fix IRQ imbalance enabling
When register sensors into thermal zone during initialization phase, it
reports error for IRQ imbalance enabling:

[    2.040713] WARNING: at kernel/irq/manage.c:513
[    2.040719] Modules linked in:
[    2.040721]
[    2.040729] CPU: 1 PID: 804 Comm: irq/33-hisi_the Not tainted 4.5.0-rc4+ #505
[    2.040732] Hardware name: HiKey Development Board (DT)
[    2.040736] task: ffffffc03ae82580 ti: ffffffc0379c8000 task.ti: ffffffc0379c8000
[    2.040745] PC is at __enable_irq+0x74/0x84
[    2.040749] LR is at __enable_irq+0x74/0x84

This warning is for IRQ imbalance enabling, which is caused by
enable_irq() twice. During sensor's initialization it tries to enable
IRQ, the driver will call thermal_zone_of_sensor_register() to bind
sensors and read sensor's temperature. But at this moment the flag
"data->irq_enabled" has been not initialized as correct state, so it
finally introduces the function enabled_irq() to be called twice. In
essentially this is caused by the flag "data->irq_enabled" is
inconsistent with real hardware IRQ enabling state.

So this patch is to fix this issue, firstly init "irq_enabled" flag
before binding sensors to thermal zone. Also change to use the function
irq_get_irqchip_state() to read back real interrupt line state.

Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17 07:28:30 -07:00
Leo Yan
439dc96811 thermal: hisilicon: support to use any sensor
In current code sensor driver registers all 4 sensors together and if
any of them has not bound to thermal zone successfully then driver will
return failure for driver's initialization. As a result, if DT binds
thermal zone with only one sensor, then the thermal driver will not work
well anymore.

So this patch is to fix this issue. It allows the thermal sensor driver
can register any number sensors at initialization phase, and fix up code
for other related code to skip related sensor's accessing if the sensor
has not been enabled in initialization phase.

Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17 07:28:30 -07:00
Wei Ni
f09d698494 thermal: tegra: add PM support
Add suspend/resume function in soctherm driver.

Signed-off-by: Wei Ni <wni@nvidia.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17 07:28:29 -07:00
Wei Ni
1ed895c2a2 thermal: tegra: handle HW initialization in one funcotion
Handle HW initialization in one function soctherm_init(),
so that the codes are more clear.

Signed-off-by: Wei Ni <wni@nvidia.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17 07:28:29 -07:00
Wei Ni
8de2ab0235 thermal: tegra: handle clocks in one function
Handle clock enable/disable codes in one function
soctherm_clk_enable(), so that the codes are more clear.

Signed-off-by: Wei Ni <wni@nvidia.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17 07:28:29 -07:00
Wei Ni
2a895871f2 thermal: tegra: add thermtrip function
Add support for hardware critical thermal limits to the
SOC_THERM driver. It use the Linux thermal framework to
create critical trip temp, and set it to SOC_THERM hardware.
If these limits are breached, the chip will reset, and if
appropriately configured, will turn off the PMIC.

This support is critical for safe usage of the chip.

Signed-off-by: Wei Ni <wni@nvidia.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17 07:28:29 -07:00
Wei Ni
c35095215a thermal: of-thermal: allow setting trip_temp on hardware
In current of-thermal, the .set_trip_temp only support to
set trip_temp for SW. But some sensors support to set
trip_temp on hardware, so that can trigger interrupt,
shutdown or any other events.
This patch adds .set_trip_temp() callback in
thermal_zone_of_device_ops{}, so that the sensor device can
use it to set trip_temp on hardware.

Signed-off-by: Wei Ni <wni@nvidia.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17 07:28:28 -07:00
Wei Ni
d753b22d8b thermal: tegra: add a debugfs to show registers
Add a debugfs interface to show register contents for debug.

Signed-off-by: Wei Ni <wni@nvidia.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17 07:28:28 -07:00
Wei Ni
8204104f35 thermal: tegra: add Tegra210 specific SOC_THERM driver
Add Tegra210 specific SOC_THERM driver.

Signed-off-by: Wei Ni <wni@nvidia.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17 07:28:28 -07:00
Wei Ni
65b6d57c24 thermal: tegra: split tegra_soctherm driver
Split most of the Tegra124 data and code into a Tegra124-specific
file.
Split most of the fuse-related code into a fuse-related source file.
This is in preparation for adding a Tegra210-specific driver in a
future patch.

Beyond the maintainability improvements, this is intended to separate
chip-specific ATE and characterization-related hacks into chip-specific
files, in the hopes that they won't pollute code for other chips.

Signed-off-by: Wei Ni <wni@nvidia.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17 07:28:28 -07:00
Wei Ni
1c3bdc1627 thermal: tegra: get rid of PDIV/HOTSPOT hack
Get rid of T124-specific PDIV/HOTSPOT hack.
tegra-soctherm.c contained a hack to set the SENSOR_PDIV and
SENSOR_HOTSPOT_OFFSET registers - it just did two writes of
T124-specific opaque values.  Convert these into a form that can be
substituted on a per-chip basis, and into structure fields that have
at least some independent meaning.

Signed-off-by: Wei Ni <wni@nvidia.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17 07:28:28 -07:00
Wei Ni
6f7e0d9d08 thermal: tegra: combine sensor group-related data
Combine sensor group-related data structures into struct
tegra_tsensor_group. This provides a single location for
sensor group data storage.
More sensor group data will be added in subsequent patches.

Signed-off-by: Wei Ni <wni@nvidia.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17 07:28:27 -07:00
Wei Ni
a4dff94ffd thermal: tegra: move tegra thermal files into tegra directory
Move Tegra soctherm driver to tegra directory, it's easy to maintain
and add more new function support for Tegra platforms.
This will also help to split soctherm driver into common parts and
chip specific data related parts.

Signed-off-by: Wei Ni <wni@nvidia.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17 07:28:27 -07:00
Eduardo Valentin
3982204cc9 thermal: convert ti-thermal to use devm_thermal_zone_of_sensor_register
This changes the driver to use the devm_ version
of thermal_zone_of_sensor_register and cleans
up the  local points and unregister calls.

Cc: Zhang Rui <rui.zhang@intel.com>
Cc: linux-pm@vger.kernel.org
Cc: linux-omap@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Tested-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17 07:28:27 -07:00
Eduardo Valentin
71ca46eeef thermal: convert tegra_thermal to use devm_thermal_zone_of_sensor_register
This changes the driver to use the devm_ version
of thermal_zone_of_sensor_register and cleans
up the  local points and unregister calls.

Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: linux-pm@vger.kernel.org
Cc: linux-tegra@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17 07:28:27 -07:00
Eduardo Valentin
2633ad1913 thermal: convert rockchip_thermal to use devm_thermal_zone_of_sensor_register
This changes the driver to use the devm_ version
of thermal_zone_of_sensor_register and cleans
up the  local points and unregister calls.

Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: linux-pm@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-rockchip@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Tested-by: Caesar Wang <wxt@rock-chips.com>
Reviewed-by: Caesar Wang <wxt@rock-chips.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17 07:28:27 -07:00
Eduardo Valentin
5e325868aa thermal: convert rcar_thermal to use devm_thermal_zone_of_sensor_register
This changes the driver to use the devm_ version
of thermal_zone_of_sensor_register and cleans
up the  local points and unregister calls.

Cc: Zhang Rui <rui.zhang@intel.com>
Cc: linux-pm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17 07:28:27 -07:00
Eduardo Valentin
e936491e5c thermal: convert qcom-spmi to use devm_thermal_zone_of_sensor_register
This changes the driver to use the devm_ version
of thermal_zone_of_sensor_register and cleans
up the  local points and unregister calls.

Cc: Zhang Rui <rui.zhang@intel.com>
Cc: linux-pm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17 07:28:26 -07:00
Eduardo Valentin
c417bdedb1 thermal: convert mtk_thermal to use devm_thermal_zone_of_sensor_register
This changes the driver to use the devm_ version
of thermal_zone_of_sensor_register and cleans
up the  local points and unregister calls.

Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: linux-pm@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-mediatek@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17 07:28:26 -07:00
Eduardo Valentin
44a520d81e thermal: convert hisi_thermal to use devm_thermal_zone_of_sensor_register
This changes the driver to use the devm_ version
of thermal_zone_of_sensor_register and cleans
up the  local points and unregister calls.

Cc: Zhang Rui <rui.zhang@intel.com>
Cc: linux-pm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17 07:28:26 -07:00
Ulises Brindis
1cd91c1820 thermal: of: fix cleanup when building a thermal zone
of_node_put is iterating through all terms in the tbps array even though
the bind has failed. We need to only iterate through the terms that have
already passed the binding step.

Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: linux-pm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ulises Brindis <brindisu@lab126.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17 07:28:24 -07:00
Richard Cochran
5af897e433 thermal: x86_pkg_temp: Handle the FROZEN hot plug notifier actions.
When performing a suspend operation, the kernel brings all of the
non-boot CPUs offline, calling the hot plug notifiers with the flag,
CPU_TASKS_FROZEN, set in the action code.  Similarly, during resume,
the CPUs are brought back online, but again the notifiers have the
FROZEN flag set.

While some very few drivers really need to treat suspend/resume
specially, this driver unintentionally ignores the notifications.

This patch changes the driver to cancel its work item when the CPU
goes down, even during a suspend operation.  As a result, the
suspended state is no longer a special case.

Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: linux-pm@vger.kernel.org
Signed-off-by: Richard Cochran <rcochran@linutronix.de>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-05-17 09:59:29 +08:00
Michele Di Giorgio
191b07541f thermal: check validity get_trip_hyst function pointer in bang-bang governor
Bang-bang thermal governor uses trip point hysteresis to make decisions.
Hysteresis is a required property in the device tree for trip points, but it is
an optional thermal zone device operation. Hence, we need to check whether the
function pointer is valid or not.

If it is not available, we assume the hysteresis to be zero. Consequently, a
highly varying temperature will make the governor continuosly switch a cooling
device ON and OFF.

CC: Zhang Rui <rui.zhang@intel.com>
CC: Eduardo Valentin <edubezval@gmail.com>
CC: Peter Feuerer <peter@piie.net>
Signed-off-by: Michele Di Giorgio <michele.digiorgio@arm.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-05-16 13:21:11 +08:00
Aaron Lu
a3c89334f0 Thermal / ACPI / video: add INT3406 thermal driver
INT3406 ACPI device object resembles an ACPI video output device, but its
_BCM is said to be deprecated and should not be used. So we will make
use of the raw interface to do the actual cooling.

Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Acked-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-05-11 02:15:31 +02:00
Srinivas Pandruvada
f1ba9eb85b thermal: int340x: processor_thermal: support acpi notification
BIOS/EC can change PPCC element dynamically and inform OS about the change.
When this driver receives notification, it will read PPCC element again.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-05-08 00:07:38 +08:00
Jacob Pan
b721ca0d19 thermal/powerclamp: remove cpu whitelist
Powerclamp works by aligning idle time to achieve package level
idle states, aka cstates. As long as one of the package cstates
is available, synchronized idle injection is meaningful.

This patch replaces the CPU whitelist with CPU feature and
package cstate counter check such that we don't have to modify
this whitelist for every new CPU.

Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-05-08 00:07:38 +08:00
Leo Yan
15333e3af1 thermal: use %d to print S32 parameters
Power allocator's parameters are S32 type, so use %d to print them.

Acked-by: Javi Merino <javi.merino@arm.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-04-27 15:54:51 -07:00
Leo Yan
5fdfc48bb0 thermal: hisilicon: increase temperature resolution
When calculate temperature, old code firstly do division and then
convert to "millicelsius" unit. This will lose resolution and only can
read back temperature with "Celsius" unit.

So firstly scale step value to "millicelsius" and then do division, so
finally we can increase resolution for temperature value. Also refine
the calculation from temperature value to step value.

Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-04-27 15:54:01 -07:00
Johannes Berg
a6f4850dbc thermal: fix Mediatek thermal controller build
At least with CONFIG_COMPILE_TEST, there's no reason to assume
that CONFIG_RESET_CONTROLLER is set, but the code for this
controller requires it since it calls device_reset().

Make CONFIG_MTK_THERMAL properly depend on CONFIG_RESET_CONTROLLER.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-04-20 21:13:21 -07:00
Wei Ni
1d0fd42fa3 thermal: consistently use int for trip temp
The commit 17e8351a77 consistently use int for temperature,
however it missed a few in trip temperature and thermal_core.

In current codes, the trip->temperature used "unsigned long"
and zone->temperature used"int", if the temperature is negative
value, it will get wrong result when compare temperature with
trip temperature.

This patch can fix it.

Signed-off-by: Wei Ni <wni@nvidia.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-04-20 20:31:14 -07:00
Randy Dunlap
62e14f6fd3 thermal: fix mtk_thermal build dependency
Fix build errors when MTK_THERMAL=y and NVMEM=m by preventing that
Kconfig combination.

drivers/built-in.o: In function `mtk_thermal_probe':
mtk_thermal.c:(.text+0xffa8f): undefined reference to `nvmem_cell_get'
mtk_thermal.c:(.text+0xffabe): undefined reference to `nvmem_cell_read'
mtk_thermal.c:(.text+0xffac9): undefined reference to `nvmem_cell_put'

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: <linux-pm@vger.kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Hanyi Wu <hanyi.wu@mediatek.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-04-20 16:22:46 -07:00
Randy Dunlap
9ebfb4e099 thermal: minor mtk_thermal.c cleanups
Trivial cleanups:
- delete one duplicate #include
- end email address with closing '>'

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Hanyi Wu <hanyi.wu@mediatek.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-04-20 16:22:46 -07:00