Commit graph

404 commits

Author SHA1 Message Date
Ben Sen
0a19f129d7 w1: add ability to set (SRAM) and store (EEPROM) configuration for temp sensors like DS18B20
Since many temperature sensors come "preconfigured" with a lower
precision, people are stuck at that precision when running on a kernel
based device (unlike the Dallas 1Wire library for e.g. Arduino, which
supports writing the configuration/scratchpad). This patch adds write
support for the scratchpad/precision registers via w1_slave sysfs.

Signed-off-by: Ben Sen <0.x29a.0@gmail.com>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-01 14:37:49 -07:00
Dan Carpenter
b9c11a2333 w1: silence an uninitialized variable warning
If kstrtoint() returns -ERANGE then "tmp" is uninitialized.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Evgeniy Polaykov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-01 14:04:19 -07:00
Geert Uytterhoeven
8f8f41d160 w1: Spelling s/minmum/minimum/
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-01 14:04:19 -07:00
Mariusz Bialonczyk
f704938c0e w1: enable active pullup for DS2482 by default
This commit enables the active pullup (APU bit) by default for
the DS2482 1-Wire master.

>From the DS2482 datasheet:
"The APU bit controls whether an active pullup (controlled slew-rate
transistor) or a passive pullup (Rwpu resistor) will be used to drive
a 1-Wire line from low to high. When APU = 0, active pullup is disabled
(resistor mode). Active Pullup should always be selected unless there is
only a single slave on the 1-Wire line."

According to the module author, Ben Gardner:
"It doesn't look like active pullup would cause any hurt if there
is only a single slave."
And my tests with multiple and single slaves on 1-Wire bus
confirms that.

This active pullup can be manually disabled using the introduced
module parameter:
  active_pullup = 0

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-01 14:04:19 -07:00
Jiri Kosina
cf09d6428d w1: w1_process() is not freezable kthread
w1_process() calls try_to_freeze(), but the thread doesn't mark itself
freezable through set_freezable(), so the try_to_freeze() call is useless.

Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-11 19:23:28 -08:00
Andreas Kemnade
7b46a105db omap_hdq: fix usecount handling
hdq_usecount was set to zero after a successful read, so
omap_hdq_put could not properly free resources which leads
e.g. to increasing usecounts in lsmod output

Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Reviewed-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-08 14:57:30 -08:00
Linus Torvalds
400c5bd5a5 power supply and reset changes for the v4.4 series
* new AXP20X USB Power driver
  * new Qualcomm SMBB driver
  * new TPS65217 Charger driver
  * BQ24257: add BQ24250/BQ24251 support
  * overhaul bq27x00 battery driver, rename to bq27xxx
  * misc. fixes and cleanups
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABCgAGBQJWOn8oAAoJENju1/PIO/qahrEP/RPHXvTxtYv8YvhaFbqcr07x
 11gRB8RRthKK5woC3s70QKlMtcHijFeCwKuacut+7tfgK2oZDIm+Bd43Pl93aypU
 Yk4oTwop5OyrLsGIGiTIPPV9HTwr4q69Or2Q91mqUAUe2wGB5uCuJiJmCowUwfZs
 piv+ISLSOcH+i1bTx3hQ7h7axsdAlaSz2o1JprZaxm3rM67M8zF1ZHSK7wlpAeBa
 DiDrtUvEDCeLL8dmCA9xkFV4yFB9T+KNh0730N2RY+zlZS6WjSpzryqwsUWWyQ6h
 U9gFgcs+DjVaGHuMsIX2zm7xXfXHgUBtXdSQoCBhpSrZsdufMsT/8VQqVZ0yqpXL
 pQ2EXy63k6tXnXEyAKTA0tAOX/WZNfmmNblkea4JiyZULn7b/WH09waMZUBJqe84
 Yn3SatVdGDN4nawsivzdiM3zR9/WTE9R3DmEeAE+g1RRsSraNwWlkzpDXcmnWmbc
 DoprnjLsDJfqL3/1ysF2V2I4B26Bws73qq6UUjJ4KEGWf8Y1fVawxrbcYmnrvg1K
 zW/saEgtl70FYqtee/0lIqTpjOZRX/O6QH5i8p7VC8cUzftX0Twc8MvfvpamDywX
 Cr1Y7pIMEhc6TFUP5lOzx9xJelA5PHJMpAT+02fh6YXMAzCcBUzL113rY5zBrVVl
 gce0iHDKAybmvww77z1r
 =0be4
 -----END PGP SIGNATURE-----

Merge tag 'for-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply

Pull power supply and reset updates from Sebastian Reichel:
 - new AXP20X USB Power driver
 - new Qualcomm SMBB driver
 - new TPS65217 Charger driver
 - BQ24257: add BQ24250/BQ24251 support
 - overhaul bq27x00 battery driver, rename to bq27xxx
 - misc fixes and cleanups

* tag 'for-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (54 commits)
  power: bq27xxx_battery: Remove unneeded dependency in Kconfig
  power: bq27xxx_battery: move irq handler to i2c section
  power: bq27xxx_battery: fix platform probe
  twl4030_charger: add missing iio dependency
  power_supply: charger-manager: add missing of_node_put
  Documentation: power: bq24257: Document exported sysfs entries
  power: bq24257: Add various device-specific sysfs properties
  power: bq24257: Allow input current limit sysfs access
  power: bq24257: Add input DPM voltage threshold setting support
  power: bq24257: Add over voltage protection setting support
  power: bq24257: Add SW-based approach for Power Good determination
  power: bq24257: Allow manual setting of input current limit
  power: bq24257: Add bit definition for temp sense enable
  power: bq24257: Add basic support for bq24250/bq24251
  dt: power: bq24257-charger: Cover additional devices
  power: bq24257: Simplify bq24257_power_supply_init()
  power: bq24257: Use managed power supply register
  power: bq24257: Streamline input current limit setup
  power: bq24257: Remove IRQ config through stat-gpios
  power: bq27xxx_battery: fix signedness bug in bq27xxx_battery_read_health()
  ...
2015-11-05 12:28:15 -08:00
Dmitry Torokhov
36fccce0e8 W1: w1-gpio - switch to using dev_pm_ops
Let's stop using legacy platform driver hooks for power management and
switch to using the standard dev_pm_ops-based hooks.

Also, instead of guarding PM methods with #ifdef CONFIG_PM annotate them
as __maybe_unused as it provides better compile coverage.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-17 21:45:05 -07:00
Vignesh R
e93762bbf6 w1: masters: omap_hdq: add support for 1-wire mode
This patches makes following changes to omap_hdq driver
 - Enable 1-wire mode.
 - Implement w1_triplet callback to facilitate search rom
   procedure and auto detection of 1-wire slaves.
 - Proper enabling and disabling of interrupt.
 - Cleanups (formatting and return value checks).

HDQ mode remains unchanged.

Signed-off-by: Vignesh R <vigneshr@ti.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Cc: Jonathan Corbet <corbet@lwn.net>
CC: Tony Lindgren <tony@atomide.com>
Cc: Vignesh R <vigneshr@ti.com>
Cc: NeilBrown <neilb@suse.de>
Cc: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-05 04:47:09 +01:00
Levente Kurusa
5052436dcb drivers/w1/w1_int.c: call put_device if device_register fails
Currently, memsetting and kfreeing the device is bad behaviour.  The
device will have a reference count of 1 and hence can cause trouble
because it has kfree'd.  Proper way to handle a failed device_register is
to call put_device right after it fails.

Signed-off-by: Levente Kurusa <levex@linux.com>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-05 04:47:09 +01:00
Andrew F. Davis
424cfde49a power: bq27xxx_battery: Platform initialization must declare a device
When initialized as a platform device the initializer must now specify
a device. An empty device name is no longer valid.

Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-09-23 16:23:12 +02:00
Andrew F. Davis
081bab217d power: bq27x00_battery: Renaming for consistency
Rename functions that are used by multiple devices. New devices
have been added and the function names and driver name are no longer
general enough for the functionality they provide.

Signed-off-by: Andrew F. Davis <afd@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: GUAN Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-09-23 16:16:22 +02:00
Linus Torvalds
089b669506 Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial tree updates from Jiri Kosina:
 "The usual stuff from trivial tree for 4.3 (kerneldoc updates, printk()
  fixes, Documentation and MAINTAINERS updates)"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (28 commits)
  MAINTAINERS: update my e-mail address
  mod_devicetable: add space before */
  scsi: a100u2w: trivial typo in printk
  i2c: Fix typo in i2c-bfin-twi.c
  treewide: fix typos in comment blocks
  Doc: fix trivial typo in SubmittingPatches
  proportions: Spelling s/consitent/consistent/
  dm: Spelling s/consitent/consistent/
  aic7xxx: Fix typo in error message
  pcmcia: Fix typo in locking documentation
  scsi/arcmsr: Fix typos in error log
  drm/nouveau/gr: Fix typo in nv10.c
  [SCSI] Fix printk typos in drivers/scsi
  staging: comedi: Grammar s/Enable support a/Enable support for a/
  Btrfs: Spelling s/consitent/consistent/
  README: GTK+ is a acronym
  ASoC: omap: Fix typo in config option description
  mm: tlb.c: Fix error message
  ntfs: super.c: Fix error log
  fix typo in Documentation/SubmittingPatches
  ...
2015-09-01 18:46:42 -07:00
Masanari Iida
b527538fe6 w1: Fix typo in MODULE_DESCRIPTION in matrox_w1.c
This patch fix spelling typo in matrox_w1.c

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
2015-08-07 14:00:26 +02:00
Vaishali Thakkar
e7390d7c52 w1: Use module_pci_driver
Use module_pci_driver for drivers whose init and exit functions
only register and unregister, respectively.

A simplified version of the Coccinelle semantic patch that performs
this transformation is as follows:

@a@
identifier f, x;
@@
-static f(...) { return pci_register_driver(&x); }

@b depends on a@
identifier e, a.x;
@@
-static e(...) { pci_unregister_driver(&x); }

@c depends on a && b@
identifier a.f;
declarer name module_init;
@@
-module_init(f);

@d depends on a && b && c@
identifier b.e, a.x;
declarer name module_exit;
declarer name module_pci_driver;
@@
-module_exit(e);
+module_pci_driver(x);

Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-05 13:48:20 -07:00
Krzysztof Kozlowski
01c48a59ba w1: Drop owner assignment from i2c_driver
i2c_driver does not need to set an owner because i2c_register_driver()
will set it.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-05 13:48:20 -07:00
Dan Carpenter
0c6d5c89a1 w1: use correct lock on error in w1_seq_show()
I noticed there was a problem here because Smatch complained:

	drivers/w1/slaves/w1_therm.c:416 w1_seq_show() warn:
	inconsistent returns 'mutex:&sl->master->mutex'.
	  Locked on:   line 416
	  Unlocked on: line 413

The problem is that we lock ->mutex but we unlock ->bus_mutex on error.
David Fries says that ->bus_mutex is correct and ->mutex is incorrect.

Fixes: d9411e57dc ('w1: Add support for DS28EA00 sequence to w1-therm')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-06-12 16:58:33 -07:00
Dan Carpenter
a14ef24b07 w1: fix for loop exit condition in w1_seq_show()
The W1_42_FINISHED_BYTE is 0xFF so the cast means the condition is
never true.

Fixes: d9411e57dc ('w1: Add support for DS28EA00 sequence to w1-therm')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-06-12 16:58:33 -07:00
Ludek Hlavacek
0dcacd768e w1: ds2482: Add i2c module alias name
Add i2c alias to enable autoloading of the module for device specified
in device-tree.

Signed-off-by: Ludek Hlavacek <ludek_h@seznam.cz>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-06-01 10:29:50 +09:00
Matt Campbell
d9411e57dc w1: Add support for DS28EA00 sequence to w1-therm
This patch provides support for the DS28EA00 digital thermometer.

The DS28EA00 provides an additional two pins for implementing a sequence
detection algorithm.  This feature allows you to determine the physical
location of the chip in the 1-wire bus without needing pre-existing
knowledge of the bus ordering.  Support is provided through the sysfs
w1_seq file.  The file will contain a single line with an integer value
representing the device index in the bus starting at 0.

Signed-off-by: Matt Campbell <mattrcampbell@gmail.com>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24 12:08:59 -07:00
David Fries
f7134eea05 w1_therm reference count family data
A temperature conversion can take 750 ms and when possible the
w1_therm slave driver drops the bus_mutex to allow other bus
operations, but that includes operations such as a periodic slave
search, which can remove this slave when it is no longer detected.
If that happens the sl->family_data will be freed and set to NULL
causing w1_slave_show to crash when it wakes up.

Signed-off-by: David Fries <David@Fries.net>
Reported-By: Thorsten Bschorr <thorsten@bschorr.de>
Tested-by: Thorsten Bschorr <thorsten@bschorr.de>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24 12:08:59 -07:00
Dmitry Khromov
c309835692 w1: introduce an ability to specify microseconds bus scanning intervals
Some of 1-Wire devices commonly associated with physical access control
systems are attached/generate presence for as short as 100 ms - hence
the tens-to-hundreds milliseconds scan intervals are required.

Signed-off-by: Dmitry Khromov <dk@icelogic.net>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24 12:08:59 -07:00
Fabian Frederick
0a56c0e1e7 w1: constify of_device_id array
of_device_id is always used as const.
(See driver.of_match_table and open firmware functions)

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-25 12:25:29 +01:00
Linus Torvalds
6ae840e7cc Char/Misc driver patches for 3.19-rc1
Here's the big char/misc driver update for 3.19-rc1
 
 Lots of little things all over the place in different drivers, and a new
 subsystem, "coresight" has been added.  Full details are in the
 shortlog.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iEYEABECAAYFAlSODosACgkQMUfUDdst+ykSNwCfcqx1Z3rQzbLwSrR2sa1fV3Zb
 yEAAniJoLZ4ZkoQK4/1ozsFc31q+gXNm
 =/epr
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver updates from Greg KH:
 "Here's the big char/misc driver update for 3.19-rc1

  Lots of little things all over the place in different drivers, and a
  new subsystem, "coresight" has been added.  Full details are in the
  shortlog"

* tag 'char-misc-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (73 commits)
  parport: parport_pc, do not remove parent devices early
  spmi: Remove shutdown/suspend/resume kernel-doc
  carma-fpga-program: drop videobuf dependency
  carma-fpga: drop videobuf dependency
  carma-fpga-program.c: fix compile errors
  i8k: Fix temperature bug handling in i8k_get_temp()
  cxl: Name interrupts in /proc/interrupt
  CXL: Return error to PSL if IRQ demultiplexing fails & print clearer warning
  coresight-replicator: remove .owner field for driver
  coresight: fixed comments in coresight.h
  coresight: fix typo in comment in coresight-priv.h
  coresight: bindings for coresight drivers
  coresight: Adding ABI documentation
  w1: support auto-load of w1_bq27000 module.
  w1: avoid potential u16 overflow
  cn: verify msg->len before making callback
  mei: export fw status registers through sysfs
  mei: read and print all six FW status registers
  mei: txe: add cherrytrail device id
  mei: kill cached host and me csr values
  ...
2014-12-14 16:43:47 -08:00
Linus Torvalds
e6b5be2be4 Driver core patches for 3.19-rc1
Here's the set of driver core patches for 3.19-rc1.
 
 They are dominated by the removal of the .owner field in platform
 drivers.  They touch a lot of files, but they are "simple" changes, just
 removing a line in a structure.
 
 Other than that, a few minor driver core and debugfs changes.  There are
 some ath9k patches coming in through this tree that have been acked by
 the wireless maintainers as they relied on the debugfs changes.
 
 Everything has been in linux-next for a while.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iEYEABECAAYFAlSOD20ACgkQMUfUDdst+ylLPACg2QrW1oHhdTMT9WI8jihlHVRM
 53kAoLeteByQ3iVwWurwwseRPiWa8+MI
 =OVRS
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core update from Greg KH:
 "Here's the set of driver core patches for 3.19-rc1.

  They are dominated by the removal of the .owner field in platform
  drivers.  They touch a lot of files, but they are "simple" changes,
  just removing a line in a structure.

  Other than that, a few minor driver core and debugfs changes.  There
  are some ath9k patches coming in through this tree that have been
  acked by the wireless maintainers as they relied on the debugfs
  changes.

  Everything has been in linux-next for a while"

* tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits)
  Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries"
  fs: debugfs: add forward declaration for struct device type
  firmware class: Deletion of an unnecessary check before the function call "vunmap"
  firmware loader: fix hung task warning dump
  devcoredump: provide a one-way disable function
  device: Add dev_<level>_once variants
  ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries
  ath: use seq_file api for ath9k debugfs files
  debugfs: add helper function to create device related seq_file
  drivers/base: cacheinfo: remove noisy error boot message
  Revert "core: platform: add warning if driver has no owner"
  drivers: base: support cpu cache information interface to userspace via sysfs
  drivers: base: add cpu_device_create to support per-cpu devices
  topology: replace custom attribute macros with standard DEVICE_ATTR*
  cpumask: factor out show_cpumap into separate helper function
  driver core: Fix unbalanced device reference in drivers_probe
  driver core: fix race with userland in device_add()
  sysfs/kernfs: make read requests on pre-alloc files use the buffer.
  sysfs/kernfs: allow attributes to request write buffer be pre-allocated.
  fs: sysfs: return EGBIG on write if offset is larger than file size
  ...
2014-12-14 16:10:09 -08:00
NeilBrown
4b7e4f8289 w1: support auto-load of w1_bq27000 module.
1/ change request_module call to zero-pad single digit
   family numbers.  This appears to be the intention of
   the code, but not what it actually does.

   This means that the alias created for W1_FAMILY_SMEM_01
   might actually be useful.

2/ Define a family name for the BQ27000 battery charge monitor.
   Unfortunately this is the same number as W1_FAMILY_SMEM_01
   so if both a compiled on a system, one module might need to
   be blacklisted.

3/ Add a MODULE_ALIAS for the bq27000.

Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-26 19:09:02 -08:00
David Fries
4b97b27939 w1: avoid potential u16 overflow
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: David Fries <David@Fries.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-26 19:09:01 -08:00
NeilBrown
126e31faa1 w1: omap-hdq: support device probing with device-tree
This driver has no 'compatible' string and so is not found when
using device-tree.

Add one with value to match
		hdqw1w: 1w@480b2000 {
device in omap3.dtsi.

Signed-off-by: NeilBrown <neilb@suse.de>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-11-10 15:58:47 -08:00
Alexander Stein
d25221525e W1: ds2490: Increase timeout when waiting for status
Adjust the bulk message timeout to the other ones (1000ms). Otherwise the
following dmesg errors can be seen on a Raspberry Pi:
[   31.492386] Failed to read 1-wire data from 0x81: err=-110.
[   31.504168] 0x81: count=-110, status:
[   31.613404] Failed to read 1-wire data from 0x81: err=-110.
[   31.621915] 0x81: count=-110, status:
[   43.260968] Failed to read 1-wire data from 0x81: err=-110.
[   43.270998] 0x81: count=-110, status:
[   43.379959] Failed to read 1-wire data from 0x81: err=-110.
[   43.388854] 0x81: count=-110, status:

Signed-off-by: Alexander Stein <alexanders83@web.de>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-07 11:24:01 -08:00
Wolfram Sang
ce882ad3c9 w1: masters: drop owner assignment from platform_drivers
A platform_driver does not need to set an owner, it will be populated by the
driver core.

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-10-20 16:21:56 +02:00
Arnd Bergmann
6b5fa77608 w1: select crc16 library for ds2406
commit 94859308a2 "w1: new w1_ds2406 driver" added a new driver
that uses the crc16 library, but didn't ensure that the core is
there. This adds the necessary Kconfig statements, just like we
have it for other w1 drivers.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Scott Alfter <scott@alfter.us>
Cc: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-23 12:38:08 -04:00
Fjodor Schelichow
1fda569090 w1/masters: use pr_* instead of printk
This patch replaces all calls to the "printk" function within the "masters"
subdirectory by calls to the appropriate "pr_*" function thus addressing
the following warning generated by the checkpatch script:

WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ...
        then dev_err(dev, ... then pr_err(...  to printk(KERN_ERR ...

Signed-off-by: Fjodor Schelichow <fjodor.schelichow@hotmail.com>
Signed-off-by: Roman Sommer <romsom2@yahoo.de>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-19 17:46:51 -07:00
Fjodor Schelichow
fdc9167a78 w1: use pr_* instead of printk
This patch replaces all calls to the "printk" function within the main "w1"
directory by calls to the appropriate "pr_*" function thus addressing
the following warning generated by the checkpatch script:

WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ...
        then dev_err(dev, ... then pr_err(...  to printk(KERN_ERR ...

Signed-off-by: Fjodor Schelichow <fjodor.schelichow@hotmail.com>
Signed-off-by: Roman Sommer <romsom2@yahoo.de>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-19 17:46:51 -07:00
Fjodor Schelichow
ea022eac1e w1/slaves: use pr_* instead of printk
This patch replaces all calls to the "printk" function within the "slaves"
subdirectory by calls to the appropriate "pr_*" function thus addressing
the following warning generated by the checkpatch script:

WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ...
        then dev_err(dev, ... then pr_err(...  to printk(KERN_ERR ...

Signed-off-by: Fjodor Schelichow <fjodor.schelichow@hotmail.com>
Signed-off-by: Roman Sommer <romsom2@yahoo.de>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-19 17:46:51 -07:00
Scott Alfter
94859308a2 w1: new w1_ds2406 driver
Some preliminary work at making use of this driver led me to implement
CRC-16 checks on read and write to deal with the occasional glitchiness of
the 1-Wire bus.  The revised driver (attached) returns an I/O error if the
CRC check fails.  When reading the chip's state, either you get a valid
indication or you get an I/O error.  When changing its state, either the
change is successful or an I/O error is returned.

Signed-off-by: Scott Alfter <scott@alfter.us>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-19 17:45:14 -07:00
Thomas Wood
7242d42ace drivers/w1/w1_int.c: Fix style errors.
Replace spaces at beginning of the string with tabs, and replace foo * bar with foo *bar in a pointer declaration.

Signed-off-by: Thomas Wood <tommyandrena@gmail.com>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-19 17:45:13 -07:00
Alexander Shiyan
f80b2581a7 w1: mxc_w1: Optimize mxc_w1_ds2_touch_bit()
According to the i.MX reference manual, the read/write bit operations
takes from 60 us to 120 us.
This patch optimizes mxc_w1_ds2_touch_bit() function to use proper
value for such delay. Nevertheless, a small margin for the timeout has
been added for the case if clock frequency is inaccurate.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-19 17:43:34 -07:00
Alexander Shiyan
b7ce0b5d03 w1: mxc_w1: Perform a software reset at startup
This patch adds a software reset for 1-Wire module at driver startup.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-19 17:43:34 -07:00
Alexander Shiyan
b0dceb6a96 w1: mxc_w1: Optimize mxc_w1_ds2_reset_bus()
According to the i.MX reference manual, the reset procedure and
"presence" pulse takes 511 and 512 us, respectively. Measurement for
i.MX27 is about 1100 us. There is no need to wait Reset+Presence
more than this time.
This patch optimizes mxc_w1_ds2_reset_bus() function to use proper
value for delay after w1 bus reset. Nevertheless, a small margin for
the timeout has been added for the case if clock frequency is inaccurate.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-19 17:43:34 -07:00
Alexander Shiyan
7cbcb136a7 w1: mxc_w1: Fix incorrect "presence" status
W1 reset_bus() should return zero if slave device is present.
This patch fix this issue.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-19 17:43:34 -07:00
Linus Torvalds
776edb5931 Merge branch 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into next
Pull core locking updates from Ingo Molnar:
 "The main changes in this cycle were:

   - reduced/streamlined smp_mb__*() interface that allows more usecases
     and makes the existing ones less buggy, especially in rarer
     architectures

   - add rwsem implementation comments

   - bump up lockdep limits"

* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits)
  rwsem: Add comments to explain the meaning of the rwsem's count field
  lockdep: Increase static allocations
  arch: Mass conversion of smp_mb__*()
  arch,doc: Convert smp_mb__*()
  arch,xtensa: Convert smp_mb__*()
  arch,x86: Convert smp_mb__*()
  arch,tile: Convert smp_mb__*()
  arch,sparc: Convert smp_mb__*()
  arch,sh: Convert smp_mb__*()
  arch,score: Convert smp_mb__*()
  arch,s390: Convert smp_mb__*()
  arch,powerpc: Convert smp_mb__*()
  arch,parisc: Convert smp_mb__*()
  arch,openrisc: Convert smp_mb__*()
  arch,mn10300: Convert smp_mb__*()
  arch,mips: Convert smp_mb__*()
  arch,metag: Convert smp_mb__*()
  arch,m68k: Convert smp_mb__*()
  arch,m32r: Convert smp_mb__*()
  arch,ia64: Convert smp_mb__*()
  ...
2014-06-03 12:57:53 -07:00
Alexey Khoroshilov
a0f104644e w1: do not unlock unheld list_mutex in __w1_remove_master_device()
w1_process_callbacks() expects to be called with dev->list_mutex held,
but it is the fact only in w1_process(). __w1_remove_master_device()
calls w1_process_callbacks() after it releases list_mutex.

The patch fixes __w1_remove_master_device() to acquire list_mutex
for w1_process_callbacks().

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Acked-by: David Fries <david@fries.net>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Cc: stable <stable@vger.kernel.org> # 3.15
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-27 14:08:46 -07:00
David Fries
8a0427d192 w1: optional bundling of netlink kernel replies
Applications can submit a set of commands in one packet to the kernel,
and in some cases it is required such as reading the temperature
sensor results.  This adds an option W1_CN_BUNDLE to the flags of
cn_msg to request the kernel to reply in one packet for efficiency.

The cn_msg flags now check for unknown flag values and return an error
if one is seen.  See "Proper handling of unknown flags in system
calls" http://lwn.net/Articles/588444/

This corrects the ack values returned as per the protocol standard,
namely the original ack for status messages and seq + 1 for all others
such as the data returned from a read.

Some of the common variable names have been standardized as follows.
struct cn_msg *cn
struct w1_netlink_msg *msg
struct w1_netlink_cmd *cmd
struct w1_master *dev

When an argument and a function scope variable would collide, add req_
to the argument.

Signed-off-by: David Fries <David@Fries.net>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-27 13:56:21 -07:00
Peter Zijlstra
4e857c58ef arch: Mass conversion of smp_mb__*()
Mostly scripted conversion of the smp_mb__* barriers.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/n/tip-55dhyhocezdw1dg7u19hmh1u@git.kernel.org
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-arch@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-18 14:20:48 +02:00
David Fries
18d7f891bc w1: avoid recursive device_add
__w1_attach_slave_device calls device_add which calls w1_bus_notify
which calls the w1_bq27000 slave driver, which calls
platform_device_add and device_add and deadlocks on getting
&(&priv->bus_notifier)->rwsem as it is still held in the previous
device_add.  This avoids the problem by processing the family
add/remove outside of the slave device_add call.

Commit 47eba33a09 introduced this deadlock and added
a KOBJ_ADD, as the add was already reported in device_register two add
events were being sent.  This change suppresses the device_register
add so that any slave device sysfs entries are setup before the add
goes out.

Belisko Marek reported this change fixed the deadlock he was seeing on
ARM device tree, while testing on my x86-64 system never saw the
deadlock.

Reported-by: Belisko Marek <marek.belisko@gmail.com>
Signed-off-by: David Fries <David@Fries.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-16 14:07:51 -07:00
David Fries
593ceb0c70 w1: fix netlink refcnt leak on error path
If the message type is W1_MASTER_CMD or W1_SLAVE_CMD, then a reference
is taken when searching for the slave or master device.  If there
isn't any following data m->len (mlen is a copy) is 0 and packing up
the message for later execution is skipped leaving nothing to
decrement the reference counts.

Way back when, m->len was checked before the search that increments the
reference count, but W1_LIST_MASTERS has no additional data, the check
was moved in 9be62e0b2f causing this bug.

This change reorders to put the check before the reference count is
incremented avoiding the problem.

Signed-off-by: David Fries <David@Fries.net>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-16 14:07:51 -07:00
Alexander Shiyan
fc945d6eb7 w1: mxc_w1: Enable driver compilation with COMPILE_TEST
This helps increasing build testing coverage.
To do this, __raw_{read,write}b() functions was be replaced with
simple {read,write}b() variants.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-28 15:27:09 -08:00
Alexander Shiyan
18fd9e359f w1: mxc_w1: Driver cleanup
- Remove old and currently wrong address of the FSF from license
  parts of the code.
- Remove unused #include and sort remaining headers alphabetically.
- Remove unised definitions.
- Add definitions for bit-fields.
- Add missing module owner field.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-28 15:27:09 -08:00
Alexander Shiyan
aea476b505 w1: mxc_w1: Fix mxc_w1_ds2_reset_bus() return value
This patch fix mxc_w1_ds2_reset_bus() return value.
According to i.MX reference manual, "presence status" reflected
in the bit 6 of control register.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-28 15:27:09 -08:00
Alexander Shiyan
adffe4ab96 w1: Remove excess dependencies on W1 for masters and slaves
Configuration for masters and slaves is included only if W1 symbol
enabled, so no reason to check it once more.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-28 15:27:09 -08:00