When STA roams from one AP to another, after roam is complete, host
driver tries to get TIM information from firmware. This is no longer
supported in the firmware & hence, this call will always fail.
This failure results in the below message being displayed on the
console all the time when roam is done.
ieee80211 phy0: brcmf_update_bss_info: wl dtim_assoc failed (-52)
Changes ensure that the host driver will no longer try to get TIM
information from firmware.
Signed-off-by: Ramesh Rangavittal <ramesh.rangavittal@infineon.com>
Signed-off-by: Chi-hsien Lin <chi-hsien.lin@infineon.com>
Signed-off-by: Ian Lin <ian.lin@infineon.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220922104140.11889-5-ian.lin@infineon.com
Increase dcmd maximum buffer size to match firmware
configuration for new chips.
Signed-off-by: Lo(Double)Hsiang Lo <double.lo@cypress.com>
Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com>
Signed-off-by: Ian Lin <ian.lin@infineon.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220922104140.11889-4-ian.lin@infineon.com
Adds support of 89459 chip pcie device and save restore support.
Signed-off-by: Alexander Prutskov <alep@cypress.com>
Signed-off-by: Joseph chuang <jiac@cypress.com>
Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com>
Signed-off-by: Ian Lin <ian.lin@infineon.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220922104140.11889-3-ian.lin@infineon.com
4373 has support of 16 WOWL patterns thus increasing the default value
Signed-off-by: Ryohei Kondo <ryohei.kondo@cypress.com>
Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com>
Signed-off-by: Ian Lin <ian.lin@infineon.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220922104140.11889-2-ian.lin@infineon.com
These newer PCIe core revisions include new sets of registers that must
be used instead of the legacy ones. Introduce a brcmf_pcie_reginfo to
hold the specific register offsets and values to use for a given
platform, and change all the register accesses to indirect through it.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/E1oZDo8-0077aq-6I@rmk-PC.armlinux.org.uk
Newer chips used on Apple platforms have a max_rxbufpost greater than
512, which causes warnings when brcmf_msgbuf_rxbuf_data_fill tries to
put more entries in the ring than will fit. Increase the ring sizes
to 1024.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/E1oZDo3-0077ak-2h@rmk-PC.armlinux.org.uk
On Device Tree platforms, it is customary to be able to set the MAC
address via the Device Tree, as it is often stored in system firmware.
This is particularly relevant for Apple ARM64 platforms, where this
information comes from system configuration and passed through by the
bootloader into the DT.
Implement support for this by fetching the platform MAC address and
adding or replacing the macaddr= property in nvram. This becomes the
dongle's default MAC address.
On platforms with an SROM MAC address, this overrides it. On platforms
without one, such as Apple ARM64 devices, this is required for the
firmware to boot (it will fail if it does not have a valid MAC at all).
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/E1oZDnx-0077ae-VK@rmk-PC.armlinux.org.uk
On Apple platforms, firmware selection uses the following elements:
Property Example Source
============== ======= ========================
* Chip name 4378 Device ID
* Chip revision B1 OTP
* Platform shikoku DT (ARM64) or ACPI (x86)
* Module type RASP OTP
* Module vendor m OTP
* Module version 6.11 OTP
* Antenna SKU X3 DT (ARM64) or ACPI (x86)
In macOS, these firmwares are stored using filenames in this format
under /usr/share/firmware/wifi:
C-4378__s-B1/P-shikoku-X3_M-RASP_V-m__m-6.11.txt
To prepare firmwares for Linux, we rename these to a scheme following
the existing brcmfmac convention:
brcmfmac<chip><lower(rev)>-pcie.apple,<platform>-<mod_type>-\
<mod_vendor>-<mod_version>-<antenna_sku>.txt
The NVRAM uses all the components, while the firmware and CLM blob only
use the chip/revision/platform/antenna_sku:
brcmfmac<chip><lower(rev)>-pcie.apple,<platform>-<antenna_sku>.bin
e.g.
brcm/brcmfmac4378b1-pcie.apple,shikoku-RASP-m-6.11-X3.txt
brcm/brcmfmac4378b1-pcie.apple,shikoku-X3.bin
In addition, since there are over 1000 files in total, many of which are
symlinks or outright duplicates, we deduplicate and prune the firmware
tree to reduce firmware filenames to fewer dimensions. For example, the
shikoku platform (MacBook Air M1 2020) simplifies to just 4 files:
brcm/brcmfmac4378b1-pcie.apple,shikoku.clm_blob
brcm/brcmfmac4378b1-pcie.apple,shikoku.bin
brcm/brcmfmac4378b1-pcie.apple,shikoku-RASP-m.txt
brcm/brcmfmac4378b1-pcie.apple,shikoku-RASP-u.txt
This reduces the total file count to around 170, of which 75 are
symlinks and 95 are regular files: 7 firmware blobs, 27 CLM blobs, and
61 NVRAM config files. We also slightly process NVRAM files to correct
some formatting issues.
To handle this, the driver must try the following path formats when
looking for firmware files:
brcm/brcmfmac4378b1-pcie.apple,shikoku-RASP-m-6.11-X3.txt
brcm/brcmfmac4378b1-pcie.apple,shikoku-RASP-m-6.11.txt
brcm/brcmfmac4378b1-pcie.apple,shikoku-RASP-m.txt
brcm/brcmfmac4378b1-pcie.apple,shikoku-RASP.txt
brcm/brcmfmac4378b1-pcie.apple,shikoku-X3.txt *
brcm/brcmfmac4378b1-pcie.apple,shikoku.txt
* Not relevant for NVRAM, only for firmware/CLM.
The chip revision nominally comes from OTP on Apple platforms, but it
can be mapped to the PCI revision number, so we ignore the OTP revision
and continue to use the existing PCI revision mechanism to identify chip
revisions, as the driver already does for other chips. Unfortunately,
the mapping is not consistent between different chip types, so this has
to be determined experimentally.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/E1oZDns-0077aY-Qn@rmk-PC.armlinux.org.uk
On Apple ARM64 platforms, firmware selection requires two properties
that come from system firmware: the module-instance (aka "island", a
codename representing a given hardware platform) and the antenna-sku.
We map Apple's module codenames to board_types in the form
"apple,<module-instance>".
The mapped board_type is added to the DTS file in that form, while the
antenna-sku is forwarded by our bootloader from the Apple Device Tree
into the FDT. Grab them from the DT so firmware selection can use
them.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/E1oZDnn-0077aS-NA@rmk-PC.armlinux.org.uk
On Apple platforms, the One Time Programmable ROM in the Broadcom chips
contains information about the specific board design (module, vendor,
version) that is required to select the correct NVRAM file. Parse this
OTP ROM and extract the required strings.
Note that the user OTP offset/size is per-chip. This patch does not add
any chips yet.
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/E1oZDni-0077aM-I6@rmk-PC.armlinux.org.uk
Apple platforms have firmware and config files identified with multiple
dimensions. We want to be able to find the most specific firmware
available for any given platform, progressively trying more general
firmwares.
To do this, first add support for passing in multiple board_types,
which will be tried in sequence.
Since this will cause more log spam due to missing firmwares, also
switch the secondary firmware fecthes to use the _nowarn variant, which
will not log if the firmware is not found.
Signed-off-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/E1oZDnd-0077aG-Dk@rmk-PC.armlinux.org.uk
Now that the firmware fetcher can handle per-board CLM files, load the
CLM blob alongside the other firmware files and change the bus API to
just return the existing blob, instead of fetching the filename.
This enables per-board CLM blobs, which are required on Apple platforms.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/E1oZDnY-0077aA-8f@rmk-PC.armlinux.org.uk
Teach brcm_alt_fw_paths to correctly split off variable length
extensions, and enable alt firmware lookups for the CLM blob firmware
requests.
Apple platforms have per-board CLM blob files.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/E1oZDnT-0077a4-4k@rmk-PC.armlinux.org.uk
Return value from brcmf_fil_iovar_data_set() and
brcmf_config_ap_mgmt_ie() directly instead of
taking this in another redundant variable.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Jinpeng Cui <cui.jinpeng2@zte.com.cn>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220831132254.303697-1-cui.jinpeng2@zte.com.cn
Add HW and SDIO ids for use with the muRata 1YN (Cypress CYW43439).
Add the firmware mapping structures for the CYW43439 chipset.
The 43439 needs some things setup similar to the 43430 chipset.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220827024903.617294-1-marex@denx.de
The Chuwi Hi8 Pro tablet contains quite generic names in the sys_vendor
and product_name DMI strings, without this patch brcmfmac will try to load:
"brcmfmac43430a0-sdio.Default string-Default string.txt" as nvram file
which is way too generic.
The Chuwi Hi8 Pro uses the same Ampak AP6212 module as the Chuwi Vi8 Plus
and the nvram for the Vi8 Plus is already in linux-firmware, so point
the new DMI nvram filename quirk to the Vi8 Plus nvram file.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220810142333.141044-1-hdegoede@redhat.com
Many devices ship with a nvram ccode value of X2/XT/XU/XV/ALL which are
all special world-wide compatibility ccode-s. Most of these world-wide
ccode-s allow passive scan mode only for 2.4GHz channels 12-14,
only enabling them when an AP is seen on them.
Since linux-firmware has moved to the new cyfmac43430-sdio.bin +
cyfmac43430-sdio.clm_blob firmware files this no longer works and
43430 devices using e.g. an X2 ccode fail to connect to an AP on
channel 13.
Add the 43430 chip-id to the list of chips for which to use the ISO3166
country code + rev 0 as fallback in brcmf_translate_country_code() to
fix this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220810142328.141030-1-hdegoede@redhat.com
* rtw88: operation, locking, warning, and code style fixes
* rtw89: small updates
* cfg80211/mac80211: more EHT/MLO (802.11be, WiFi 7) work
* brcmfmac: a couple of fixes
* misc cleanups etc.
-----BEGIN PGP SIGNATURE-----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=J5Fc
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2022-08-26-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes berg says:
====================
Various updates:
* rtw88: operation, locking, warning, and code style fixes
* rtw89: small updates
* cfg80211/mac80211: more EHT/MLO (802.11be, WiFi 7) work
* brcmfmac: a couple of fixes
* misc cleanups etc.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for various key operations on MLD by adding new parameter
link_id. Pass the link_id received from userspace to driver for add_key,
get_key, del_key, set_default_key, set_default_mgmt_key and
set_default_beacon_key to support configuring keys specific to each MLO
link. Userspace must not specify link ID for MLO pairwise key since it
is common for all the MLO links.
Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
Link: https://lore.kernel.org/r/20220730052643.1959111-4-quic_vjakkam@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The skb will be allocated to send TIM update info in brcmf_fws_tim_update.
Currently the skb will be freed when tx is failed but it will not be freed
when tx is completed successfully. The fix is to free the skb when tx is
completed always.
Signed-off-by: Wataru Gohda <wataru.gohda@cypress.com>
Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com>
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220722115632.620681-6-alvin@pqrs.dk
Conn_info->req_ie/resp_ie is used to indicate the assoc_req_ies /
assoc_resp_ies to cfg80211 layer when connection is done. The buffer is
freed and allocated again at next connection establishment. The buffers
also needs to be freed at the timing of rmmod as well.
Signed-off-by: Wataru Gohda <wataru.gohda@cypress.com>
Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com>
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220722115632.620681-5-alvin@pqrs.dk
We should not sleep while holding the spin lock. It makes
'scheduling while atomic' in brcmf_msgbuf_delete_flowring.
And to avoid race condition between deleting flowring and txflow,
we only hold spin lock when seting flowring status to RING_CLOSING.
Signed-off-by: Wright Feng <wright.feng@cypress.com>
Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com>
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220722115632.620681-3-alvin@pqrs.dk
The race condition in brcmf_msgbuf_txflow and brcmf_msgbuf_delete_flowring
makes tx_msghdr writing after brcmf_msgbuf_remove_flowring. Host
driver should delete flowring after txflow complete and all txstatus back,
or pend_8021x_cnt will never be zero and cause every connection 950
milliseconds(MAX_WAIT_FOR_8021X_TX) delay.
Signed-off-by: Wright Feng <wright.feng@cypress.com>
Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com>
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220722115632.620681-2-alvin@pqrs.dk
- Runtime verification infrastructure
This is the biggest change for this pull request. It introduces the
runtime verification that is necessary for running Linux on safety
critical systems. It allows for deterministic automata models to be
inserted into the kernel that will attach to tracepoints, where the
information on these tracepoints will move the model from state to state.
If a state is encountered that does not belong to the model, it will then
activate a given reactor, that could just inform the user or even panic
the kernel (for which safety critical systems will detect and can recover
from).
- Two monitor models are also added: Wakeup In Preemptive (WIP - not to be
confused with "work in progress"), and Wakeup While Not Running (WWNR).
- Added __vstring() helper to the TRACE_EVENT() macro to replace several
vsnprintf() usages that were all doing it wrong.
- eprobes now can have their event autogenerated when the event name is left
off.
- The rest is various cleanups and fixes.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCYu0yzRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qj4HAP4tQtV55rjj4DQ5XIXmtI3/64PmyRSJ
+y4DEXi1UvEUCQD/QAuQfWoT/7gh35ltkfeS4t3ockzy14rrkP5drZigiQA=
=kEtM
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
- Runtime verification infrastructure
This is the biggest change here. It introduces the runtime
verification that is necessary for running Linux on safety critical
systems.
It allows for deterministic automata models to be inserted into the
kernel that will attach to tracepoints, where the information on
these tracepoints will move the model from state to state.
If a state is encountered that does not belong to the model, it will
then activate a given reactor, that could just inform the user or
even panic the kernel (for which safety critical systems will detect
and can recover from).
- Two monitor models are also added: Wakeup In Preemptive (WIP - not to
be confused with "work in progress"), and Wakeup While Not Running
(WWNR).
- Added __vstring() helper to the TRACE_EVENT() macro to replace
several vsnprintf() usages that were all doing it wrong.
- eprobes now can have their event autogenerated when the event name is
left off.
- The rest is various cleanups and fixes.
* tag 'trace-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (50 commits)
rv: Unlock on error path in rv_unregister_reactor()
tracing: Use alignof__(struct {type b;}) instead of offsetof()
tracing/eprobe: Show syntax error logs in error_log file
scripts/tracing: Fix typo 'the the' in comment
tracepoints: It is CONFIG_TRACEPOINTS not CONFIG_TRACEPOINT
tracing: Use free_trace_buffer() in allocate_trace_buffers()
tracing: Use a struct alignof to determine trace event field alignment
rv/reactor: Add the panic reactor
rv/reactor: Add the printk reactor
rv/monitor: Add the wwnr monitor
rv/monitor: Add the wip monitor
rv/monitor: Add the wip monitor skeleton created by dot2k
Documentation/rv: Add deterministic automata instrumentation documentation
Documentation/rv: Add deterministic automata monitor synthesis documentation
tools/rv: Add dot2k
Documentation/rv: Add deterministic automaton documentation
tools/rv: Add dot2c
Documentation/rv: Add a basic documentation
rv/include: Add instrumentation helper functions
rv/include: Add deterministic automata monitor definition via C macros
...
Core
----
- Refactor the forward memory allocation to better cope with memory
pressure with many open sockets, moving from a per socket cache to
a per-CPU one
- Replace rwlocks with RCU for better fairness in ping, raw sockets
and IP multicast router.
- Network-side support for IO uring zero-copy send.
- A few skb drop reason improvements, including codegen the source file
with string mapping instead of using macro magic.
- Rename reference tracking helpers to a more consistent
netdev_* schema.
- Adapt u64_stats_t type to address load/store tearing issues.
- Refine debug helper usage to reduce the log noise caused by bots.
BPF
---
- Improve socket map performance, avoiding skb cloning on read
operation.
- Add support for 64 bits enum, to match types exposed by kernel.
- Introduce support for sleepable uprobes program.
- Introduce support for enum textual representation in libbpf.
- New helpers to implement synproxy with eBPF/XDP.
- Improve loop performances, inlining indirect calls when
possible.
- Removed all the deprecated libbpf APIs.
- Implement new eBPF-based LSM flavor.
- Add type match support, which allow accurate queries to the
eBPF used types.
- A few TCP congetsion control framework usability improvements.
- Add new infrastructure to manipulate CT entries via eBPF programs.
- Allow for livepatch (KLP) and BPF trampolines to attach to the same
kernel function.
Protocols
---------
- Introduce per network namespace lookup tables for unix sockets,
increasing scalability and reducing contention.
- Preparation work for Wi-Fi 7 Multi-Link Operation (MLO) support.
- Add support to forciby close TIME_WAIT TCP sockets via user-space
tools.
- Significant performance improvement for the TLS 1.3 receive path,
both for zero-copy and not-zero-copy.
- Support for changing the initial MTPCP subflow priority/backup
status
- Introduce virtually contingus buffers for sockets over RDMA,
to cope better with memory pressure.
- Extend CAN ethtool support with timestamping capabilities
- Refactor CAN build infrastructure to allow building only the needed
features.
Driver API
----------
- Remove devlink mutex to allow parallel commands on multiple links.
- Add support for pause stats in distributed switch.
- Implement devlink helpers to query and flash line cards.
- New helper for phy mode to register conversion.
New hardware / drivers
----------------------
- Ethernet DSA driver for the rockchip mt7531 on BPI-R2 Pro.
- Ethernet DSA driver for the Renesas RZ/N1 A5PSW switch.
- Ethernet DSA driver for the Microchip LAN937x switch.
- Ethernet PHY driver for the Aquantia AQR113C EPHY.
- CAN driver for the OBD-II ELM327 interface.
- CAN driver for RZ/N1 SJA1000 CAN controller.
- Bluetooth: Infineon CYW55572 Wi-Fi plus Bluetooth combo device.
Drivers
-------
- Intel Ethernet NICs:
- i40e: add support for vlan pruning
- i40e: add support for XDP framented packets
- ice: improved vlan offload support
- ice: add support for PPPoE offload
- Mellanox Ethernet (mlx5)
- refactor packet steering offload for performance and scalability
- extend support for TC offload
- refactor devlink code to clean-up the locking schema
- support stacked vlans for bridge offloads
- use TLS objects pool to improve connection rate
- Netronome Ethernet NICs (nfp):
- extend support for IPv6 fields mangling offload
- add support for vepa mode in HW bridge
- better support for virtio data path acceleration (VDPA)
- enable TSO by default
- Microsoft vNIC driver (mana)
- add support for XDP redirect
- Others Ethernet drivers:
- bonding: add per-port priority support
- microchip lan743x: extend phy support
- Fungible funeth: support UDP segmentation offload and XDP xmit
- Solarflare EF100: add support for virtual function representors
- MediaTek SoC: add XDP support
- Mellanox Ethernet/IB switch (mlxsw):
- dropped support for unreleased H/W (XM router).
- improved stats accuracy
- unified bridge model coversion improving scalability
(parts 1-6)
- support for PTP in Spectrum-2 asics
- Broadcom PHYs
- add PTP support for BCM54210E
- add support for the BCM53128 internal PHY
- Marvell Ethernet switches (prestera):
- implement support for multicast forwarding offload
- Embedded Ethernet switches:
- refactor OcteonTx MAC filter for better scalability
- improve TC H/W offload for the Felix driver
- refactor the Microchip ksz8 and ksz9477 drivers to share
the probe code (parts 1, 2), add support for phylink
mac configuration
- Other WiFi:
- Microchip wilc1000: diable WEP support and enable WPA3
- Atheros ath10k: encapsulation offload support
Old code removal:
- Neterion vxge ethernet driver: this is untouched since more than
10 years.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=hxEG
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking changes from Paolo Abeni:
"Core:
- Refactor the forward memory allocation to better cope with memory
pressure with many open sockets, moving from a per socket cache to
a per-CPU one
- Replace rwlocks with RCU for better fairness in ping, raw sockets
and IP multicast router.
- Network-side support for IO uring zero-copy send.
- A few skb drop reason improvements, including codegen the source
file with string mapping instead of using macro magic.
- Rename reference tracking helpers to a more consistent netdev_*
schema.
- Adapt u64_stats_t type to address load/store tearing issues.
- Refine debug helper usage to reduce the log noise caused by bots.
BPF:
- Improve socket map performance, avoiding skb cloning on read
operation.
- Add support for 64 bits enum, to match types exposed by kernel.
- Introduce support for sleepable uprobes program.
- Introduce support for enum textual representation in libbpf.
- New helpers to implement synproxy with eBPF/XDP.
- Improve loop performances, inlining indirect calls when possible.
- Removed all the deprecated libbpf APIs.
- Implement new eBPF-based LSM flavor.
- Add type match support, which allow accurate queries to the eBPF
used types.
- A few TCP congetsion control framework usability improvements.
- Add new infrastructure to manipulate CT entries via eBPF programs.
- Allow for livepatch (KLP) and BPF trampolines to attach to the same
kernel function.
Protocols:
- Introduce per network namespace lookup tables for unix sockets,
increasing scalability and reducing contention.
- Preparation work for Wi-Fi 7 Multi-Link Operation (MLO) support.
- Add support to forciby close TIME_WAIT TCP sockets via user-space
tools.
- Significant performance improvement for the TLS 1.3 receive path,
both for zero-copy and not-zero-copy.
- Support for changing the initial MTPCP subflow priority/backup
status
- Introduce virtually contingus buffers for sockets over RDMA, to
cope better with memory pressure.
- Extend CAN ethtool support with timestamping capabilities
- Refactor CAN build infrastructure to allow building only the needed
features.
Driver API:
- Remove devlink mutex to allow parallel commands on multiple links.
- Add support for pause stats in distributed switch.
- Implement devlink helpers to query and flash line cards.
- New helper for phy mode to register conversion.
New hardware / drivers:
- Ethernet DSA driver for the rockchip mt7531 on BPI-R2 Pro.
- Ethernet DSA driver for the Renesas RZ/N1 A5PSW switch.
- Ethernet DSA driver for the Microchip LAN937x switch.
- Ethernet PHY driver for the Aquantia AQR113C EPHY.
- CAN driver for the OBD-II ELM327 interface.
- CAN driver for RZ/N1 SJA1000 CAN controller.
- Bluetooth: Infineon CYW55572 Wi-Fi plus Bluetooth combo device.
Drivers:
- Intel Ethernet NICs:
- i40e: add support for vlan pruning
- i40e: add support for XDP framented packets
- ice: improved vlan offload support
- ice: add support for PPPoE offload
- Mellanox Ethernet (mlx5)
- refactor packet steering offload for performance and scalability
- extend support for TC offload
- refactor devlink code to clean-up the locking schema
- support stacked vlans for bridge offloads
- use TLS objects pool to improve connection rate
- Netronome Ethernet NICs (nfp):
- extend support for IPv6 fields mangling offload
- add support for vepa mode in HW bridge
- better support for virtio data path acceleration (VDPA)
- enable TSO by default
- Microsoft vNIC driver (mana)
- add support for XDP redirect
- Others Ethernet drivers:
- bonding: add per-port priority support
- microchip lan743x: extend phy support
- Fungible funeth: support UDP segmentation offload and XDP xmit
- Solarflare EF100: add support for virtual function representors
- MediaTek SoC: add XDP support
- Mellanox Ethernet/IB switch (mlxsw):
- dropped support for unreleased H/W (XM router).
- improved stats accuracy
- unified bridge model coversion improving scalability (parts 1-6)
- support for PTP in Spectrum-2 asics
- Broadcom PHYs
- add PTP support for BCM54210E
- add support for the BCM53128 internal PHY
- Marvell Ethernet switches (prestera):
- implement support for multicast forwarding offload
- Embedded Ethernet switches:
- refactor OcteonTx MAC filter for better scalability
- improve TC H/W offload for the Felix driver
- refactor the Microchip ksz8 and ksz9477 drivers to share the
probe code (parts 1, 2), add support for phylink mac
configuration
- Other WiFi:
- Microchip wilc1000: diable WEP support and enable WPA3
- Atheros ath10k: encapsulation offload support
Old code removal:
- Neterion vxge ethernet driver: this is untouched since more than 10 years"
* tag 'net-next-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1890 commits)
doc: sfp-phylink: Fix a broken reference
wireguard: selftests: support UML
wireguard: allowedips: don't corrupt stack when detecting overflow
wireguard: selftests: update config fragments
wireguard: ratelimiter: use hrtimer in selftest
net/mlx5e: xsk: Discard unaligned XSK frames on striding RQ
net: usb: ax88179_178a: Bind only to vendor-specific interface
selftests: net: fix IOAM test skip return code
net: usb: make USB_RTL8153_ECM non user configurable
net: marvell: prestera: remove reduntant code
octeontx2-pf: Reduce minimum mtu size to 60
net: devlink: Fix missing mutex_unlock() call
net/tls: Remove redundant workqueue flush before destroy
net: txgbe: Fix an error handling path in txgbe_probe()
net: dsa: Fix spelling mistakes and cleanup code
Documentation: devlink: add add devlink-selftests to the table of contents
dccp: put dccp_qpolicy_full() and dccp_qpolicy_push() in the same lock
net: ionic: fix error check for vlan flags in ionic_set_nic_features()
net: ice: fix error NETIF_F_HW_VLAN_CTAG_FILTER check in ice_vsi_sync_fltr()
nfp: flower: add support for tunnel offload without key ID
...
In case of buggy firmware, brcmfmac may perform a hardware reset. If during
reset and subsequent probing an early failure occurs, a memory region is
accidentally double-freed. With hardened memory allocation enabled, this error
will be detected.
- return early where appropriate to skip unnecessary clean-up.
- set '.freezer' pointer to NULL to prevent double-freeing under possible
other circumstances and to re-align result under various different
behaviors of memory allocation freeing.
- correctly claim host on func1 for disabling func2.
- after reset, do not initiate probing immediately, but rely on events.
Given a firmware crash, function 'brcmf_sdio_bus_reset' is called. It calls
'brcmf_sdiod_remove', then follows up with 'brcmf_sdiod_probe' to reinitialize
the hardware. If 'brcmf_sdiod_probe' fails to "set F1 blocksize", it exits
early, which includes calling 'brcmf_sdiod_remove'. In both cases
'brcmf_sdiod_freezer_detach' is called to free allocated '.freezer', which
has not yet been re-allocated the second time.
Stacktrace of (failing) hardware reset after firmware-crash:
Code: b9402b82 8b0202c0 eb1a02df 54000041 (d4210000)
ret_from_fork+0x10/0x20
kthread+0x154/0x160
worker_thread+0x188/0x504
process_one_work+0x1f4/0x490
brcmf_core_bus_reset+0x34/0x44 [brcmfmac]
brcmf_sdio_bus_reset+0x68/0xc0 [brcmfmac]
brcmf_sdiod_probe+0x170/0x21c [brcmfmac]
brcmf_sdiod_remove+0x48/0xc0 [brcmfmac]
kfree+0x210/0x220
__slab_free+0x58/0x40c
Call trace:
x2 : 0000000000000040 x1 : fffffc00002d2b80 x0 : ffff00000b4aee40
x5 : ffff8000013fa728 x4 : 0000000000000001 x3 : ffff00000b4aee00
x8 : ffff800009967ce0 x7 : ffff8000099bfce0 x6 : 00000006f8005d01
x11: ffff8000099bfce0 x10: 00000000fffff000 x9 : ffff8000083401d0
x14: 0000000000000000 x13: 657a69736b636f6c x12: 6220314620746573
x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000030
x20: fffffc00002d2ba0 x19: fffffc00002d2b80 x18: 0000000000000000
x23: ffff00000b4aee00 x22: ffff00000b4aee00 x21: 0000000000000001
x26: ffff00000b4aee00 x25: ffff0000f7753705 x24: 000000000001288a
x29: ffff80000a22bbf0 x28: ffff000000401200 x27: 000000008020001a
sp : ffff80000a22bbf0
lr : kfree+0x210/0x220
pc : __slab_free+0x58/0x40c
pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
Workqueue: events brcmf_core_bus_reset [brcmfmac]
Hardware name: Pine64 Pinebook Pro (DT)
CPU: 2 PID: 639 Comm: kworker/2:2 Tainted: G C 5.16.0-0.bpo.4-arm64 #1 Debian 5.16.12-1~bpo11+1
nvmem_rockchip_efuse industrialio_triggered_buffer videodev snd_soc_core snd_pcm_dmaengine kfifo_buf snd_pcm io_domain mc industrialio mt>
Modules linked in: snd_seq_dummy snd_hrtimer snd_seq snd_seq_device nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reje>
Internal error: Oops - BUG: 0 [#1] SMP
kernel BUG at mm/slub.c:379!
Signed-off-by: Danny van Heumen <danny@dannyvanheumen.nl>
Reviewed-by: Arend van Spriel <aspriel.gmail.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/id1HN6qCMAirApBzTA6fT7ZFWBBGCJhULpflxQ7NT6cgCboVnn3RHpiOFjA9SbRqzBRFLk9ES0C4FNvO6fUQsNg7pqF6ZSNAYUo99nHy8PY=@dannyvanheumen.nl
Commit a21bf90e92 ("brcmfmac: use ISO3166 country code and 0 rev as
fallback on some devices") introduced a fallback mechanism whereby a
trivial mapping from ISO3166 country codes to firmware country code and
revision is used on some devices. This fallback operates on the device
level, so it is enabled only for certain supported chipsets.
In general though, the firmware country codes are determined by the CLM
blob, which is board-specific and may vary despite the underlying
chipset being the same.
The aforementioned commit is actually a refinement of a previous commit
that was reverted in commit 151a7c12c4 ("Revert "brcmfmac: use ISO3166
country code and 0 rev as fallback"") due to regressions with a BCM4359
device. The refinement restricted the fallback mechanism to specific
chipsets such as the BCM4345.
We use a chipset - CYW88359 - that the driver identifies as a BCM4359
too. But in our case, the CLM blob uses ISO3166 country codes
internally, and all with revision 0. So the trivial mapping is exactly
what is needed in order for the driver to sync the kernel regulatory
domain to the firmware. This is just a matter of how the CLM blob was
prepared by the hardware vendor. The same could hold for other boards
too.
Although the brcm,ccode-map device tree property is useful for cases
where the mapping is more complex, the trivial case invites a much
simpler specification. This patch adds support for parsing the
brcm,ccode-map-trivial device tree property. Subordinate to the more
specific brcm,ccode-map property, this new proprety simply informs the
driver that the fallback method should be used in every case.
In the absence of the new property in the device tree, expect no
functional change.
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220711123005.3055300-3-alvin@pqrs.dk
On some boards there is no eeprom to hold the nvram, in this case instead
a board specific nvram is loaded from /lib/firmware. On most boards the
macaddr=... setting in the /lib/firmware nvram file is ignored because
the wifi/bt chip has a unique MAC programmed into the chip itself.
But in some cases the actual MAC from the /lib/firmware nvram file gets
used, leading to MAC conflicts.
The MAC addresses in the troublesome nvram files seem to all come from
the same nvram file template, so we can detect this by checking for
the template nvram file MAC.
Detect that the default MAC address is being used and replace it
with a random MAC address to avoid MAC address conflicts.
Note that udev will detect this is a random MAC based on
/sys/class/net/wlan0/addr_assign_type and then replace this with
a MAC based on hashing the netdev-name + the machine-id. So that
the MAC address is both guaranteed to be unique per machine while
it is still the same/persistent at each boot (assuming the
default Link.MACAddressPolicy=persistent udev setting).
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220708133712.102179-2-hdegoede@redhat.com
Add a little helper to send "cur_etheraddr" commands to the interface
and to handle the error reporting of it in a single place.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Arend van Spriel <aspriel@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220708133712.102179-1-hdegoede@redhat.com
Use the new DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() macros to
handle the .suspend/.resume callbacks.
These macros allow the suspend and resume functions to be automatically
dropped by the compiler when CONFIG_SUSPEND is disabled, without having
to use #ifdef guards.
Some other functions not directly called by the .suspend/.resume
callbacks, but still related to PM were also taken outside #ifdef
guards.
The advantage is then that these functions are now always compiled
independently of any Kconfig option, and thanks to that bugs and
regressions are easier to catch.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220627193701.31074-1-paul@crapouillou.net
The for loop in brcmf_of_probe() would ideally end with something like
"i <= strlen(board_type)" instead of "i < board_type[i]". But
fortunately, the two are equivalent.
Anyway, it's simpler to use strreplace() instead.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Suggested-by: Johannes Berg <johannes@sipsolutions.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/YqrhsKcjEA7B2pC4@kili
Instead of open coding a __dynamic_array() with a fixed length (which
defeats the purpose of the dynamic array in the first place). Use the new
__vstring() helper that will use a va_list and only write enough of the
string into the ring buffer that is needed.
Link: https://lkml.kernel.org/r/20220705224749.622796175@goodmis.org
Cc: Arend van Spriel <aspriel@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Franky Lin <franky.lin@broadcom.com>
Cc: Hante Meuleman <hante.meuleman@broadcom.com>
Cc: Kalle Valo <kvalo@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: linux-wireless@vger.kernel.org
Cc: brcm80211-dev-list.pdl@broadcom.com
Cc: SHA-cyfmac-dev-list@infineon.com
Cc: netdev@vger.kernel.org
Acked-by: Kalle Valo <kvalo@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The MLO links used for connection with an MLD AP are decided by the
driver in case of SME offloaded to driver.
Add support for the drivers to indicate the information of links used
for MLO connection in connect and roam callbacks, update the connected
links information in wdev from connect/roam result sent by driver.
Also, send the connected links information to userspace.
Add a netlink flag attribute to indicate that userspace supports
handling of MLO connection. Drivers must not do MLO connection when this
flag is not set. This is to maintain backwards compatibility with older
supplicant versions which doesn't have support for MLO connection.
Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Pass the link id through to the get_beacon and return
the beacon for a specific link id.
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Split the bss_info_changed method to vif_cfg_changed and
link_info_changed, with the latter getting a link ID.
Also change the 'changed' parameter to u64 already, we
know we need that.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We'll use bss_conf for per-link configuration later, so
move out all the non-link-specific data out into a new
struct ieee80211_vif_cfg used in the vif.
Some adjustments were done with the following spatch:
@@
expression sdata;
struct ieee80211_vif *vifp;
identifier var = { assoc, ibss_joined, aid, arp_addr_list, arp_addr_cnt, ssid, ssid_len, s1g, ibss_creator };
@@
(
-sdata->vif.bss_conf.var
+sdata->vif.cfg.var
|
-vifp->bss_conf.var
+vifp->cfg.var
)
@bss_conf@
struct ieee80211_bss_conf *bss_conf;
identifier var = { assoc, ibss_joined, aid, arp_addr_list, arp_addr_cnt, ssid, ssid_len, s1g, ibss_creator };
@@
-bss_conf->var
+vif_cfg->var
(though more manual fixups were needed, e.g. replacing
"vif_cfg->" by "vif->cfg." in many files.)
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In order to support multi-link operation with multiple links,
start adding some APIs. The notable addition here is to have
the link ID in a new nl80211 attribute, that will be used to
differentiate the links in many nl80211 operations.
So far, this patch adds the netlink NL80211_ATTR_MLO_LINK_ID
attribute (as well as the NL80211_ATTR_MLO_LINKS attribute)
and plugs it through the system in some places, checking the
validity etc. along with other infrastructure needed for it.
For now, I've decided to include only the over-the-air link
ID in the API. I know we discussed that we eventually need to
have to have other ways of identifying a link, but for local
AP mode and auth/assoc commands as well as set_key etc. we'll
use the OTA ID.
Also included in this patch is some refactoring of the data
structures in struct wireless_dev, splitting for the first
time the data into type dependent pieces, to make reasoning
about these things easier.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Avoid abusing the efivar layer by invoking it with locally constructed
efivar_entry instances, and instead, just call the EFI routines directly
if available.
Acked-by: Kalle Valo <kvalo@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
GCC 12 really doesn't like partial struct allocations:
drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c:2202:32: warning: array subscript ‘struct brcmf_ext_join_params_le[0]’ is partly outside array bounds of ‘void[70]’ [-Warray-bounds]
2202 | ext_join_params->scan_le.passive_time =
| ^~
brcmfmac is trying to save 2 bytes at the end by either allocating
or not allocating a channel member. Let's keep @join_params_size
the "right" size but kmalloc() the full structure.
Acked-by: Kalle Valo <kvalo@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This allows firmware to provide MAC address using device tree. Like in
case there is no MAC burned in wlan NVRAM.
Signed-off-by: Pavel Löbl <pavel@loebl.cz>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220506044246.67146-1-pavel@loebl.cz
First set of patches for v5.19 and this is a big one. We have two new
drivers, a change in mac80211 STA API affecting most drivers and
ath11k getting support for WCN6750. And as usual lots of fixes and
cleanups all over.
Major changes:
new drivers
* wfx: silicon labs devices
* plfxlc: pureLiFi X, XL, XC devices
mac80211
* host based BSS color collision detection
* prepare sta handling for IEEE 802.11be Multi-Link Operation (MLO) support
rtw88
* support TP-Link T2E devices
rtw89
* support firmware crash simulation
* preparation for 8852ce hardware support
ath11k
* Wake-on-WLAN support for QCA6390 and WCN6855
* device recovery (firmware restart) support for QCA6390 and WCN6855
* support setting Specific Absorption Rate (SAR) for WCN6855
* read country code from SMBIOS for WCN6855/QCA6390
* support for WCN6750
wcn36xx
* support for transmit rate reporting to user space
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmJxS2sRHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZuNgwf9H2oxMKLKrlFoX1qHtNBwZuHS6IERhOkM
NI9DjS4MCyiUSbA5r3sWlpqXQeKIbG/05gUZ6Y0ircGFwnAGjZ6isPwo8pKFgbh5
QljXQjUTHbkshrXW8K+VGJxw4F1oiPlOGUDVdXPy2FLx5ZvBlaUV2rWQUzsWX9I0
EnrM6ygHBVejVYDe+JSkb1gzb/07xuZN410IJPuZTPKJfYiE0oGU3zpTbExFitaz
ObjfFUWqHrVue525WFAJ9Dbk8kYEKyMThr7rkkWekYJjujJLJo0qhEiZVZu0eEsk
Vq4PdKmQAqlgbShQ/3Mv8BRsSH2wy62+zKjPWL+8t4Gmm9DbLu+++A==
=T7Ii
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2022-05-03' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v5.19
First set of patches for v5.19 and this is a big one. We have two new
drivers, a change in mac80211 STA API affecting most drivers and
ath11k getting support for WCN6750. And as usual lots of fixes and
cleanups all over.
Major changes:
new drivers
- wfx: silicon labs devices
- plfxlc: pureLiFi X, XL, XC devices
mac80211
- host based BSS color collision detection
- prepare sta handling for IEEE 802.11be Multi-Link Operation (MLO) support
rtw88
- support TP-Link T2E devices
rtw89
- support firmware crash simulation
- preparation for 8852ce hardware support
ath11k
- Wake-on-WLAN support for QCA6390 and WCN6855
- device recovery (firmware restart) support for QCA6390 and WCN6855
- support setting Specific Absorption Rate (SAR) for WCN6855
- read country code from SMBIOS for WCN6855/QCA6390
- support for WCN6750
wcn36xx
- support for transmit rate reporting to user space
* tag 'wireless-next-2022-05-03' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (228 commits)
rtw89: 8852c: rfk: add DPK
rtw89: 8852c: rfk: add IQK
rtw89: 8852c: rfk: add RX DCK
rtw89: 8852c: rfk: add RCK
rtw89: 8852c: rfk: add TSSI
rtw89: 8852c: rfk: add LCK
rtw89: 8852c: rfk: add DACK
rtw89: 8852c: rfk: add RFK tables
plfxlc: fix le16_to_cpu warning for beacon_interval
rtw88: remove a copy of the NAPI_POLL_WEIGHT define
carl9170: tx: fix an incorrect use of list iterator
wil6210: use NAPI_POLL_WEIGHT for napi budget
ath10k: remove a copy of the NAPI_POLL_WEIGHT define
ath11k: Add support for WCN6750 device
ath11k: Datapath changes to support WCN6750
ath11k: HAL changes to support WCN6750
ath11k: Add QMI changes for WCN6750
ath11k: Fetch device information via QMI for WCN6750
ath11k: Add register access logic for WCN6750
ath11k: Add HW params for WCN6750
...
====================
Link: https://lore.kernel.org/r/20220503153622.C1671C385A4@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This uses ISO3166 country code and 0 rev on brcmfmac43602 chips.
Without this patch 80 MHz width is not selected on 5 GHz channels.
Commit a21bf90e92 ("brcmfmac: use ISO3166 country code and 0 rev as
fallback on some devices") provides a way to specify chips for using the
fallback case.
Before commit 151a7c12c4 ("Revert "brcmfmac: use ISO3166 country code
and 0 rev as fallback"") brcmfmac43602 devices works correctly and for
this specific case 80 MHz width is selected.
Signed-off-by: Hamid Zamani <hzamani.cs91@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220423111237.60892-1-hzamani.cs91@gmail.com