This patch moves the bpf_setsockopt(TCP_CONGESTION) logic into
another function. The next patch will add extra logic to avoid
recursion and this will make the latter patch easier to follow.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20220929070407.965581-4-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The check on the tcp-cc, "cdg", is done in the bpf_sk_setsockopt which is
used by the bpf_tcp_ca, bpf_lsm, cg_sockopt, and tcp_iter hooks.
However, it is not done for cg sock_ddr, cg sockops, and some of
the bpf_lsm_cgroup hooks.
The tcp-cc "cdg" should have very limited usage. This patch is to
move the "cdg" check to the common sol_tcp_sockopt() so that all
hooks have a consistent behavior. The motivation to make
this check consistent now is because the latter patch will
refactor the bpf_setsockopt(TCP_CONGESTION) into another function,
so it is better to take this chance to refactor this piece
also.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20220929070407.965581-3-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The mptcp socket and its subflow sockets in accept queue can't be
released after the process exit.
While the release of a mptcp socket in listening state, the
corresponding tcp socket will be released too. Meanwhile, the tcp
socket in the unaccept queue will be released too. However, only init
subflow is in the unaccept queue, and the joined subflow is not in the
unaccept queue, which makes the joined subflow won't be released, and
therefore the corresponding unaccepted mptcp socket will not be released
to.
This can be reproduced easily with following steps:
1. create 2 namespace and veth:
$ ip netns add mptcp-client
$ ip netns add mptcp-server
$ sysctl -w net.ipv4.conf.all.rp_filter=0
$ ip netns exec mptcp-client sysctl -w net.mptcp.enabled=1
$ ip netns exec mptcp-server sysctl -w net.mptcp.enabled=1
$ ip link add red-client netns mptcp-client type veth peer red-server \
netns mptcp-server
$ ip -n mptcp-server address add 10.0.0.1/24 dev red-server
$ ip -n mptcp-server address add 192.168.0.1/24 dev red-server
$ ip -n mptcp-client address add 10.0.0.2/24 dev red-client
$ ip -n mptcp-client address add 192.168.0.2/24 dev red-client
$ ip -n mptcp-server link set red-server up
$ ip -n mptcp-client link set red-client up
2. configure the endpoint and limit for client and server:
$ ip -n mptcp-server mptcp endpoint flush
$ ip -n mptcp-server mptcp limits set subflow 2 add_addr_accepted 2
$ ip -n mptcp-client mptcp endpoint flush
$ ip -n mptcp-client mptcp limits set subflow 2 add_addr_accepted 2
$ ip -n mptcp-client mptcp endpoint add 192.168.0.2 dev red-client id \
1 subflow
3. listen and accept on a port, such as 9999. The nc command we used
here is modified, which makes it use mptcp protocol by default.
$ ip netns exec mptcp-server nc -l -k -p 9999
4. open another *two* terminal and use each of them to connect to the
server with the following command:
$ ip netns exec mptcp-client nc 10.0.0.1 9999
Input something after connect to trigger the connection of the second
subflow. So that there are two established mptcp connections, with the
second one still unaccepted.
5. exit all the nc command, and check the tcp socket in server namespace.
And you will find that there is one tcp socket in CLOSE_WAIT state
and can't release forever.
Fix this by closing all of the unaccepted mptcp socket in
mptcp_subflow_queue_clean() with __mptcp_close().
Now, we can ensure that all unaccepted mptcp sockets will be cleaned by
__mptcp_close() before they are released, so mptcp_sock_destruct(), which
is used to clean the unaccepted mptcp socket, is not needed anymore.
The selftests for mptcp is ran for this commit, and no new failures.
Fixes: f296234c98 ("mptcp: Add handling of incoming MP_JOIN requests")
Fixes: 6aeed90450 ("mptcp: fix race on unaccepted mptcp sockets")
Cc: stable@vger.kernel.org
Reviewed-by: Jiang Biao <benbjiang@tencent.com>
Reviewed-by: Mengen Sun <mengensun@tencent.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Factor out __mptcp_close() from mptcp_close(). The caller of
__mptcp_close() should hold the socket lock, and cancel mptcp work when
__mptcp_close() returns true.
This function will be used in the next commit.
Fixes: f296234c98 ("mptcp: Add handling of incoming MP_JOIN requests")
Fixes: 6aeed90450 ("mptcp: fix race on unaccepted mptcp sockets")
Cc: stable@vger.kernel.org
Reviewed-by: Jiang Biao <benbjiang@tencent.com>
Reviewed-by: Mengen Sun <mengensun@tencent.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We tell driver developers to always pass NAPI_POLL_WEIGHT
as the weight to netif_napi_add(). This may be confusing
to newcomers, drop the weight argument, those who really
need to tweak the weight can use netif_napi_add_weight().
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for CAN
Link: https://lore.kernel.org/r/20220927132753.750069-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The v6_rcv_saddr and rcv_saddr are inside a union in the
'struct inet_bind2_bucket'. When searching a bucket by following the
bhash2 hashtable chain, eg. inet_bind2_bucket_match, it is only using
the sk->sk_family and there is no way to check if the inet_bind2_bucket
has a v6 or v4 address in the union. This leads to an uninit-value
KMSAN report in [0] and also potentially incorrect matches.
This patch fixes it by adding a family member to the inet_bind2_bucket
and then tests 'sk->sk_family != tb->family' before matching
the sk's address to the tb's address.
Cc: Joanne Koong <joannelkoong@gmail.com>
Fixes: 28044fc1d4 ("net: Add a bhash2 table hashed by port and address")
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Tested-by: Alexander Potapenko <glider@google.com>
Link: https://lore.kernel.org/r/20220927002544.3381205-1-kafai@fb.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If fastopen is used, poll must allow a first write that will trigger
the SYN+data
Similar to what is done in tcp_poll().
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Benjamin Hesmans <benjamin.hesmans@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When TCP_FASTOPEN_CONNECT has been set on the socket before a connect,
the defer flag is set and must be handled when sendmsg is called.
This is similar to what is done in tcp_sendmsg_locked().
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Co-developed-by: Benjamin Hesmans <benjamin.hesmans@tessares.net>
Signed-off-by: Benjamin Hesmans <benjamin.hesmans@tessares.net>
Signed-off-by: Dmytro Shytyi <dmytro@shytyi.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It will be used to support TCP FastOpen with MPTCP in the following
commit.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Co-developed-by: Dmytro Shytyi <dmytro@shytyi.net>
Signed-off-by: Dmytro Shytyi <dmytro@shytyi.net>
Signed-off-by: Benjamin Hesmans <benjamin.hesmans@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Set the option for the first subflow only. For the other subflows TFO
can't be used because a mapping would be needed to cover the data in the
SYN.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Benjamin Hesmans <benjamin.hesmans@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We can benefit from a smaller struct ubuf_info, so leave only mandatory
fields and let users to decide how they want to extend it. Convert
MSG_ZEROCOPY to struct ubuf_info_msgzc and remove duplicated fields.
This reduces the size from 48 bytes to just 16.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some drivers depend on shutdown being called for proper operation.
Unset HCI_USER_CHANNEL and call the full close routine since shutdown is
complementary to setup.
Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Suspend notifier should only be registered and unregistered once per
hdev. Simplify this by only registering during driver registration and
simply exiting early when HCI_USER_CHANNEL is set.
Reported-by: syzbot <syzkaller@googlegroups.com>
Fixes: 359ee4f834 (Bluetooth: Unregister suspend with userchannel)
Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This reverts commit 1d0403d20f.
Anatoly Pugachev reported that the commit 1d0403d20f ("net: set proper
memcg for net_init hooks allocations") is somehow causing the sparc64
VMs failed to boot and the VMs boot fine with that patch reverted. So,
revert the patch for now and later we can debug the issue.
Link: https://lore.kernel.org/all/20220918092849.GA10314@u164.east.ru/
Reported-by: Anatoly Pugachev <matorola@gmail.com>
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Cc: Vasily Averin <vvs@openvz.org>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: cgroups@vger.kernel.org
Cc: sparclinux@vger.kernel.org
Cc: linux-mm@kvack.org
Cc: linux-kernel@vger.kernel.org
Tested-by: Anatoly Pugachev <matorola@gmail.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Fixes: 1d0403d20f ("net: set proper memcg for net_init hooks allocations")
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Analogous to commit b575b24b8e ("netfilter: Fix rpfilter
dropping vrf packets by mistake") but for nftables fib expression:
Add special treatment of VRF devices so that typical reverse path
filtering via 'fib saddr . iif oif' expression works as expected.
Fixes: f6d0cbcf09 ("netfilter: nf_tables: add fib expression")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Florian Westphal <fw@strlen.de>
Both is_bpf and is_ebpf are boolean types, so
(!is_bpf && !is_ebpf) || (is_bpf && is_ebpf) can be reduced to
is_bpf == is_ebpf in tcf_bpf_init().
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Change that introduced the use of __check_timeout did not account for
link types properly, it always assumes ACL_LINK is used thus causing
hdev->acl_last_tx to be used even in case of LE_LINK and then again
uses ACL_LINK with hci_link_tx_to.
To fix this __check_timeout now takes the link type as parameter and
then procedure to use the right last_tx based on the link type and pass
it to hci_link_tx_to.
Fixes: 1b1d29e514 ("Bluetooth: Make use of __check_timeout on hci_sched_le")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Tested-by: David Beinder <david@beinder.at>
To work around a misbehavior of the compiler's ability to see into
composite flexible array structs (as detailed in the coming memcpy()
hardening series[1]), split the memcpy() of the header and the payload
so no false positive run-time overflow warning will be generated. This
split already existed for the "firstfrag" case, so just generalize the
logic further.
[1] https://lore.kernel.org/linux-hardening/20220901065914.1417829-2-keescook@chromium.org/
Cc: Eric Dumazet <edumazet@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Reported-by: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220924040835.3364912-1-keescook@chromium.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Similar to the previous commit, the Netlink interface of the OVS
conntrack module was restricted to global CAP_NET_ADMIN by using
GENL_ADMIN_PERM. This is changed to GENL_UNS_ADMIN_PERM to support
unprivileged containers in non-initial user namespace.
Signed-off-by: Michael Weiß <michael.weiss@aisec.fraunhofer.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The Netlink interface for metering was restricted to global CAP_NET_ADMIN
by using GENL_ADMIN_PERM. To allow metring in a non-inital user namespace,
e.g., a container, this is changed to GENL_UNS_ADMIN_PERM.
Signed-off-by: Michael Weiß <michael.weiss@aisec.fraunhofer.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Commit 6911458dc4 ("wifi: mac80211: mlme: refactor assoc success
handling") moved the per-link setup out of ieee80211_assoc_success() into a
new function ieee80211_assoc_config_link() but missed to remove the unlock
of 'sta_mtx' in case of HE capability/operation missing on HE AP, which
leads to a double unlock:
ieee80211_assoc_success() {
...
ieee80211_assoc_config_link() {
...
if (!(link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_HE) &&
(!elems->he_cap || !elems->he_operation)) {
mutex_unlock(&sdata->local->sta_mtx);
...
}
...
}
...
mutex_unlock(&sdata->local->sta_mtx);
...
}
Fixes: 6911458dc4 ("wifi: mac80211: mlme: refactor assoc success handling")
Signed-off-by: Rafael Mendonca <rafaelmendsr@gmail.com>
Link: https://lore.kernel.org/r/20220925143420.784975-1-rafaelmendsr@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Commit 98b0b46746 ("wifi: mac80211: mlme: use correct link_sta")
switched to link station instead of deflink and added some checks to do
that, which are done with the 'sta_mtx' mutex held. However, the error
path of these checks does not unlock 'sta_mtx' before returning.
Fixes: 98b0b46746 ("wifi: mac80211: mlme: use correct link_sta")
Signed-off-by: Rafael Mendonca <rafaelmendsr@gmail.com>
Link: https://lore.kernel.org/r/20220924184042.778676-1-rafaelmendsr@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
During our testing of WFM200 module over SDIO on i.MX6Q-based platform,
we discovered a memory corruption on the system, tracing back to the wfx
driver. Using kfence, it was possible to trace it back to the root
cause, which is hw->max_rates set to 8 in wfx_init_common,
while the maximum defined by IEEE80211_TX_TABLE_SIZE is 4.
This causes array out-of-bounds writes during updates of the rate table,
as seen below:
BUG: KFENCE: memory corruption in kfree_rcu_work+0x320/0x36c
Corrupted memory at 0xe0a4ffe0 [ 0x03 0x03 0x03 0x03 0x01 0x00 0x00
0x02 0x02 0x02 0x09 0x00 0x21 0xbb 0xbb 0xbb ] (in kfence-#81):
kfree_rcu_work+0x320/0x36c
process_one_work+0x3ec/0x920
worker_thread+0x60/0x7a4
kthread+0x174/0x1b4
ret_from_fork+0x14/0x2c
0x0
kfence-#81: 0xe0a4ffc0-0xe0a4ffdf, size=32, cache=kmalloc-64
allocated by task 297 on cpu 0 at 631.039555s:
minstrel_ht_update_rates+0x38/0x2b0 [mac80211]
rate_control_tx_status+0xb4/0x148 [mac80211]
ieee80211_tx_status_ext+0x364/0x1030 [mac80211]
ieee80211_tx_status+0xe0/0x118 [mac80211]
ieee80211_tasklet_handler+0xb0/0xe0 [mac80211]
tasklet_action_common.constprop.0+0x11c/0x148
__do_softirq+0x1a4/0x61c
irq_exit+0xcc/0x104
call_with_stack+0x18/0x20
__irq_svc+0x80/0xb0
wq_worker_sleeping+0x10/0x100
wq_worker_sleeping+0x10/0x100
schedule+0x50/0xe0
schedule_timeout+0x2e0/0x474
wait_for_completion+0xdc/0x1ec
mmc_wait_for_req_done+0xc4/0xf8
mmc_io_rw_extended+0x3b4/0x4ec
sdio_io_rw_ext_helper+0x290/0x384
sdio_memcpy_toio+0x30/0x38
wfx_sdio_copy_to_io+0x88/0x108 [wfx]
wfx_data_write+0x88/0x1f0 [wfx]
bh_work+0x1c8/0xcc0 [wfx]
process_one_work+0x3ec/0x920
worker_thread+0x60/0x7a4
kthread+0x174/0x1b4
ret_from_fork+0x14/0x2c 0x0
After discussion on the wireless mailing list it was clarified
that the issue has been introduced by:
commit ee0e16ab75 ("mac80211: minstrel_ht: fill all requested rates")
and fix shall be in minstrel_ht_update_rates in rc80211_minstrel_ht.c.
Fixes: ee0e16ab75 ("mac80211: minstrel_ht: fill all requested rates")
Link: https://lore.kernel.org/all/12e5adcd-8aed-f0f7-70cc-4fb7b656b829@camlingroup.com/
Link: https://lore.kernel.org/linux-wireless/20220915131445.30600-1-lech.perczak@camlingroup.com/
Cc: Jérôme Pouiller <jerome.pouiller@silabs.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Peter Seiderer <ps.report@gmx.net>
Cc: Kalle Valo <kvalo@kernel.org>
Cc: Krzysztof Drobiński <krzysztof.drobinski@camlingroup.com>,
Signed-off-by: Paweł Lenkow <pawel.lenkow@camlingroup.com>
Signed-off-by: Lech Perczak <lech.perczak@camlingroup.com>
Reviewed-by: Peter Seiderer <ps.report@gmx.net>
Reviewed-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Acked-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Commit 10cb8e6175 ("mac80211: enable QoS support for nl80211 ctrl port")
changed ieee80211_tx_control_port() to aways call
__ieee80211_select_queue() without checking local->hw.queues.
__ieee80211_select_queue() returns a queue-id between 0 and 3, which means
that now ieee80211_tx_control_port() may end up setting the queue-mapping
for a skb to a value higher then local->hw.queues if local->hw.queues
is less then 4.
Specifically this is a problem for ralink rt2500-pci cards where
local->hw.queues is 2. There this causes rt2x00queue_get_tx_queue() to
return NULL and the following error to be logged: "ieee80211 phy0:
rt2x00mac_tx: Error - Attempt to send packet over invalid queue 2",
after which association with the AP fails.
Other callers of __ieee80211_select_queue() skip calling it when
local->hw.queues < IEEE80211_NUM_ACS, add the same check to
ieee80211_tx_control_port(). This fixes ralink rt2500-pci and
similar cards when less then 4 tx-queues no longer working.
Fixes: 10cb8e6175 ("mac80211: enable QoS support for nl80211 ctrl port")
Cc: Markus Theil <markus.theil@tu-ilmenau.de>
Suggested-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220918192052.443529-1-hdegoede@redhat.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Make sure local->queue_stop_reasons and vif.txqs_stopped stay in sync.
When a new vif is created the queues may end up in an inconsistent state
and be inoperable:
Communication not using iTXQ will work, allowing to e.g. complete the
association. But the 4-way handshake will time out. The sta will not
send out any skbs queued in iTXQs.
All normal attempts to start the queues will fail when reaching this
state.
local->queue_stop_reasons will have marked all queues as operational but
vif.txqs_stopped will still be set, creating an inconsistent internal
state.
In reality this seems to be race between the mac80211 function
ieee80211_do_open() setting SDATA_STATE_RUNNING and the wake_txqs_tasklet:
Depending on the driver and the timing the queues may end up to be
operational or not.
Cc: stable@vger.kernel.org
Fixes: f856373e2f ("wifi: mac80211: do not wake queues on a vif that is being stopped")
Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de>
Acked-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20220915130946.302803-1-alexander@wetzel-home.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
ieee80211_txq_purge() calls fq_tin_reset() and
ieee80211_purge_tx_queue(); Both are then calling
ieee80211_free_txskb(). Which can decide to TX the skb again.
There are at least two ways to get a deadlock:
1) When we have a TDLS teardown packet queued in either tin or frags
ieee80211_tdls_td_tx_handle() will call ieee80211_subif_start_xmit()
while we still hold fq->lock. ieee80211_txq_enqueue() will thus
deadlock.
2) A variant of the above happens if aggregation is up and running:
In that case ieee80211_iface_work() will deadlock with the original
task: The original tasks already holds fq->lock and tries to get
sta->lock after kicking off ieee80211_iface_work(). But the worker
can get sta->lock prior to the original task and will then spin for
fq->lock.
Avoid these deadlocks by not sending out any skbs when called via
ieee80211_free_txskb().
Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de>
Link: https://lore.kernel.org/r/20220915124120.301918-1-alexander@wetzel-home.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The Bitrate for HE/EHT MCS6 is calculated wrongly due to the
incorrect MCS divisor value for mcs6. Fix it with the proper
value.
previous mcs_divisor value = (11769/6144) = 1.915527
fixed mcs_divisor value = (11377/6144) = 1.851725
Fixes: 9c97c88d2f ("cfg80211: Add support to calculate and report 4096-QAM HE rates")
Signed-off-by: Tamizh Chelvam Raja <quic_tamizhr@quicinc.com>
Link: https://lore.kernel.org/r/20220908181034.9936-1-quic_tamizhr@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
nf_ct_put need to be called to put the refcount got by tcf_ct_fill_params
to avoid possible refcount leak when tcf_ct_flow_table_get fails.
Fixes: c34b961a24 ("net/sched: act_ct: Create nf flow table per zone")
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Link: https://lore.kernel.org/r/20220923020046.8021-1-hbh25y@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
taprio_dev_notifier() subscribes to netdev state changes in order to
determine whether interfaces which have a taprio root qdisc have changed
their link speed, so the internal calculations can be adapted properly.
The 'qdev' temporary variable serves no purpose, because we just use it
only once, and can just as well use qdisc_dev(q->root) directly (or the
"dev" that comes from the netdev notifier; this is because qdev is only
interesting if it was the subject of the state change, _and_ its root
qdisc belongs in the taprio list).
The 'found' variable also doesn't really serve too much of a purpose
either; we can just call taprio_set_picos_per_byte() within the loop,
and exit immediately afterwards.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Link: https://lore.kernel.org/r/20220923145921.3038904-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As pointed out during review, currently the following set of commands
crashes the kernel:
$ ip netns add ns0
$ ip link set swp0 netns ns0
$ ip netns del ns0
WARNING: CPU: 1 PID: 27 at net/core/dev.c:10884 unregister_netdevice_many+0xaa4/0xaec
Workqueue: netns cleanup_net
pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : unregister_netdevice_many+0xaa4/0xaec
lr : unregister_netdevice_many+0x700/0xaec
Call trace:
unregister_netdevice_many+0xaa4/0xaec
default_device_exit_batch+0x294/0x340
ops_exit_list+0xac/0xc4
cleanup_net+0x2e4/0x544
process_one_work+0x4ec/0xb40
---[ end trace 0000000000000000 ]---
unregister_netdevice: waiting for swp0 to become free. Usage count = 2
This is because since DSA user ports, since they started populating
dev->rtnl_link_ops in the blamed commit, gained a different treatment
from default_device_exit_net(), which thinks these interfaces can now be
unregistered.
They can't; so set netns_refund = true to restore the behavior prior to
populating dev->rtnl_link_ops.
Fixes: 95f510d0b7 ("net: dsa: allow the DSA master to be seen and changed through rtnetlink")
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20220921185428.1767001-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
During LPC2022 I meetup with my page_pool co-maintainer Ilias. When
discussing page_pool code we realised/remembered certain optimizations
had not been fully utilised.
Since commit c07aea3ef4 ("mm: add a signature in struct page") struct
page have a direct pointer to the page_pool object this page was
allocated from.
Thus, with this info it is possible to skip the rhashtable_lookup to
find the page_pool object in __xdp_return().
The rcu_read_lock can be removed as it was tied to xdp_mem_allocator.
The page_pool object is still safe to access as it tracks inflight pages
and (potentially) schedules final release from a work queue.
Created a micro benchmark of XDP redirecting from mlx5 into veth with
XDP_DROP bpf-prog on the peer veth device. This increased performance
6.5% from approx 8.45Mpps to 9Mpps corresponding to using 7 nanosec
(27 cycles at 3.8GHz) less per packet.
Suggested-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Link: https://lore.kernel.org/r/166377993287.1737053.10258297257583703949.stgit@firesoul
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The dust has settled a bit and it's become obvious what code is
totally common between nfsd_init_dirlist_pages() and
nfsd3_init_dirlist_pages(). Move that common code to SUNRPC.
The new helper brackets the existing xdr_init_decode_pages() API.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Note the function returns a per-transport value, not a per-request
value (eg, one that is related to the size of the available send or
receive buffer space).
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Currently, SUNRPC clears the whole of .pc_argsize before processing
each incoming RPC transaction. Add an extra parameter to struct
svc_procedure to enable upper layers to reduce the amount of each
operation's argument structure that is zeroed by SUNRPC.
The size of struct nfsd4_compoundargs, in particular, is a lot to
clear on each incoming RPC Call. A subsequent patch will cut this
down to something closer to what NFSv2 and NFSv3 uses.
This patch should cause no behavior changes.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Move exception handling code out of the hot path, and avoid the need
for a bswap of a non-constant.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Similar to udp_read_skb(), delete the unnecessary while loop in
unix_read_skb() for readability. Since recv_actor() cannot return a
value greater than skb->len (see sk_psock_verdict_recv()), remove the
redundant check.
Suggested-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Link: https://lore.kernel.org/r/7009141683ad6cd3785daced3e4a80ba0eb773b5.1663909008.git.peilin.ye@bytedance.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Delete the unnecessary while loop in udp_read_skb() for readability.
Additionally, since recv_actor() cannot return a value greater than
skb->len (see sk_psock_verdict_recv()), remove the redundant check.
Suggested-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Link: https://lore.kernel.org/r/343b5d8090a3eb764068e9f1d392939e2b423747.1663909008.git.peilin.ye@bytedance.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In sk_psock_backlog function, for ingress direction skb, if no new data
packet arrives after the skb is cached, the cached skb does not have a
chance to be added to the receive queue of psock. As a result, the cached
skb cannot be received by the upper-layer application. Fix this by reschedule
the psock work to dispose the cached skb in sk_msg_recvmsg function.
Fixes: 604326b41a ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: Liu Jian <liujian56@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20220907071311.60534-1-liujian56@huawei.com
Blamed commit added a txhash parameter to tcp_v6_send_response()
but forgot to update tcp_v6_send_reset() accordingly.
Fixes: aa51b80e1a ("ipv6: tcp: send consistent autoflowlabel in SYN_RECV state")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20220922165036.1795862-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEBsvAIBsPu6mG7thcrX5LkNig010FAmMtnygTHG1rbEBwZW5n
dXRyb25peC5kZQAKCRCtfkuQ2KDTXXOLCACFQGHCZrUGdWBw83UDA9r/lHuiIRuX
ELaSq1h9PJ2BC2+4t/4uDClJgvSYkxJkomNUVDDvbMK8gNTdVdIuHzaR12kerVWs
ArG/g0tjRE3ed5I3JWIOZ/ukfVmsVy/Rm/cwtqtWibJNSFtZuiodN1sYtS3Bv4i3
9sAdU6++LW/4OSAMss0+6VakC27/D5GJEZuEdYveqtf/TunrqNKGL2M5YmbenRoD
Bnx7FIiPHeL8pYz97W5ZEyGzZH90AuKOvHmx3+cHgZVHDzyBKd0UNLgisYFwXo9w
+9tfyZMZqzIZL2R0f3GVGPSvJGnLaX73bdgc8FAas/mY9WJze7plYWKt
=8zkH
-----END PGP SIGNATURE-----
Merge tag 'linux-can-next-for-6.1-20220923' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2022-09-23
The first 2 patches are by Ziyang Xuan and optimize registration and
the sending in the CAN BCM protocol a bit.
The next 8 patches target the gs_usb driver. 7 are by me and first fix
the time hardware stamping support (added during this net-next cycle),
rename a variable, convert the usb_control_msg + manual
kmalloc()/kfree() to usb_control_msg_{send,rev}(), clean up the error
handling and add switchable termination support. The patch by Rhett
Aultman and Vasanth Sadhasivan convert the driver from
usb_alloc_coherent()/usb_free_coherent() to kmalloc()/URB_FREE_BUFFER.
The last patch is by Shang XiaoJing and removes an unneeded call to
dev_err() from the ctucanfd driver.
* tag 'linux-can-next-for-6.1-20220923' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next:
can: ctucanfd: Remove redundant dev_err call
can: gs_usb: remove dma allocations
can: gs_usb: add switchable termination support
can: gs_usb: gs_make_candev(): clean up error handling
can: gs_usb: convert from usb_control_msg() to usb_control_msg_{send,recv}()
can: gs_usb: gs_cmd_reset(): rename variable holding struct gs_can pointer to dev
can: gs_usb: gs_can_open(): initialize time counter before starting device
can: gs_usb: add missing lock to protect struct timecounter::cycle_last
can: gs_usb: gs_usb_get_timestamp(): fix endpoint parameter for usb_control_msg_recv()
can: bcm: check the result of can_send() in bcm_can_tx()
can: bcm: registration process optimization in bcm_module_init()
====================
Link: https://lore.kernel.org/r/20220923120859.740577-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If can_send() fail, it should not update frames_abs counter
in bcm_can_tx(). Add the result check for can_send() in bcm_can_tx().
Suggested-by: Marc Kleine-Budde <mkl@pengutronix.de>
Suggested-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Link: https://lore.kernel.org/all/9851878e74d6d37aee2f1ee76d68361a46f89458.1663206163.git.william.xuanziyang@huawei.com
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Now, register_netdevice_notifier() and register_pernet_subsys() are both
after can_proto_register(). It can create CAN_BCM socket and process socket
once can_proto_register() successfully, so it is possible missing notifier
event or proc node creation because notifier or bcm proc directory is not
registered or created yet. Although this is a low probability scenario, it
is not impossible.
Move register_pernet_subsys() and register_netdevice_notifier() to the
front of can_proto_register(). In addition, register_pernet_subsys() and
register_netdevice_notifier() may fail, check their results are necessary.
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Link: https://lore.kernel.org/all/823cff0ebec33fa9389eeaf8b8ded3217c32cb38.1663206163.git.william.xuanziyang@huawei.com
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This adds support for rate matching (also known as rate adaptation) to
the phy subsystem. The general idea is that the phy interface runs at
one speed, and the MAC throttles the rate at which it sends packets to
the link speed. There's a good overview of several techniques for
achieving this at [1]. This patch adds support for three: pause-frame
based (such as in Aquantia phys), CRS-based (such as in 10PASS-TS and
2BASE-TL), and open-loop-based (such as in 10GBASE-W).
This patch makes a few assumptions and a few non assumptions about the
types of rate matching available. First, it assumes that different phys
may use different forms of rate matching. Second, it assumes that phys
can use rate matching for any of their supported link speeds (e.g. if a
phy supports 10BASE-T and XGMII, then it can adapt XGMII to 10BASE-T).
Third, it does not assume that all interface modes will use the same
form of rate matching. Fourth, it does not assume that all phy devices
will support rate matching (even if some do). Relaxing or strengthening
these (non-)assumptions could result in a different API. For example, if
all interface modes were assumed to use the same form of rate matching,
then a bitmask of interface modes supportting rate matching would
suffice.
For some better visibility into the process, the current rate matching
mode is exposed as part of the ethtool ksettings. For the moment, only
read access is supported. I'm not sure what userspace might want to
configure yet (disable it altogether, disable just one mode, specify the
mode to use, etc.). For the moment, since only pause-based rate
adaptation support is added in the next few commits, rate matching can
be disabled altogether by adjusting the advertisement.
802.3 calls this feature "rate adaptation" in clause 49 (10GBASE-R) and
"rate matching" in clause 61 (10PASS-TL and 2BASE-TS). Aquantia also calls
this feature "rate adaptation". I chose "rate matching" because it is
shorter, and because Russell doesn't think "adaptation" is correct in this
context.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Check the return value of nla_nest_start(). When starting the entry
level nested attributes, if the tailroom of socket buffer is
insufficient to store the attribute header and payload, the return value
will be NULL.
There is, however, no real bug here since if the skb is full
nla_put_be16() will fail as well and we'll error out.
Signed-off-by: Li Zhong <floridsleeves@gmail.com>
Link: https://lore.kernel.org/r/20220921181716.1629541-1-floridsleeves@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
use tc_qdisc_stats_dump() in qdisc.
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The 3 functions that want access to the taprio_list:
taprio_dev_notifier(), taprio_destroy() and taprio_init() are all called
with the rtnl_mutex held, therefore implicitly serialized with respect
to each other. A spin lock serves no purpose.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Link: https://lore.kernel.org/r/20220921095632.1379251-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add the missing clause for 256 bit keys in tls_set_device_offload(), and
the needed adjustments in tls_device_fallback.c.
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use the newly introduced cipher sizes structs instead of the repeated
switch cases churn.
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce cipher sizes descriptor. It helps reducing the amount of code
duplications and repeated switch/cases that assigns the proper sizes
according to the cipher type.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A handful of awaited fixes here - revert of the FEC changes,
bluetooth fix, fixes for iwlwifi spew.
We added a warning in PHY/MDIO code which is triggering on
a couple of platforms in a false-positive-ish way. If we can't
iron that out over the week we'll drop it and re-add for 6.1.
I've added a new "follow up fixes" section for fixes to fixes
in 6.0-rcs but it may actually give the false impression that
those are problematic or that more testing time would have
caught them. So likely a one time thing.
Follow up fixes:
- nf_tables_addchain: fix nft_counters_enabled underflow
- ebtables: fix memory leak when blob is malformed
- nf_ct_ftp: fix deadlock when nat rewrite is needed
Current release - regressions:
- Revert "fec: Restart PPS after link state change"
- Revert "net: fec: Use a spinlock to guard `fep->ptp_clk_on`"
- Bluetooth: fix HCIGETDEVINFO regression
- wifi: mt76: fix 5 GHz connection regression on mt76x0/mt76x2
- mptcp: fix fwd memory accounting on coalesce
- rwlock removal fall out:
- ipmr: always call ip{,6}_mr_forward() from RCU read-side
critical section
- ipv6: fix crash when IPv6 is administratively disabled
- tcp: read multiple skbs in tcp_read_skb()
- mdio_bus_phy_resume state warning fallout:
- eth: ravb: fix PHY state warning splat during system resume
- eth: sh_eth: fix PHY state warning splat during system resume
Current release - new code bugs:
- wifi: iwlwifi: don't spam logs with NSS>2 messages
- eth: mtk_eth_soc: enable XDP support just for MT7986 SoC
Previous releases - regressions:
- bonding: fix NULL deref in bond_rr_gen_slave_id
- wifi: iwlwifi: mark IWLMEI as broken
Previous releases - always broken:
- nf_conntrack helpers:
- irc: tighten matching on DCC message
- sip: fix ct_sip_walk_headers
- osf: fix possible bogus match in nf_osf_find()
- ipvlan: fix out-of-bound bugs caused by unset skb->mac_header
- core: fix flow symmetric hash
- bonding, team: unsync device addresses on ndo_stop
- phy: micrel: fix shared interrupt on LAN8814
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=wrep
-----END PGP SIGNATURE-----
Merge tag 'net-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from wifi, netfilter and can.
A handful of awaited fixes here - revert of the FEC changes, bluetooth
fix, fixes for iwlwifi spew.
We added a warning in PHY/MDIO code which is triggering on a couple of
platforms in a false-positive-ish way. If we can't iron that out over
the week we'll drop it and re-add for 6.1.
I've added a new "follow up fixes" section for fixes to fixes in
6.0-rcs but it may actually give the false impression that those are
problematic or that more testing time would have caught them. So
likely a one time thing.
Follow up fixes:
- nf_tables_addchain: fix nft_counters_enabled underflow
- ebtables: fix memory leak when blob is malformed
- nf_ct_ftp: fix deadlock when nat rewrite is needed
Current release - regressions:
- Revert "fec: Restart PPS after link state change" and the related
"net: fec: Use a spinlock to guard `fep->ptp_clk_on`"
- Bluetooth: fix HCIGETDEVINFO regression
- wifi: mt76: fix 5 GHz connection regression on mt76x0/mt76x2
- mptcp: fix fwd memory accounting on coalesce
- rwlock removal fall out:
- ipmr: always call ip{,6}_mr_forward() from RCU read-side
critical section
- ipv6: fix crash when IPv6 is administratively disabled
- tcp: read multiple skbs in tcp_read_skb()
- mdio_bus_phy_resume state warning fallout:
- eth: ravb: fix PHY state warning splat during system resume
- eth: sh_eth: fix PHY state warning splat during system resume
Current release - new code bugs:
- wifi: iwlwifi: don't spam logs with NSS>2 messages
- eth: mtk_eth_soc: enable XDP support just for MT7986 SoC
Previous releases - regressions:
- bonding: fix NULL deref in bond_rr_gen_slave_id
- wifi: iwlwifi: mark IWLMEI as broken
Previous releases - always broken:
- nf_conntrack helpers:
- irc: tighten matching on DCC message
- sip: fix ct_sip_walk_headers
- osf: fix possible bogus match in nf_osf_find()
- ipvlan: fix out-of-bound bugs caused by unset skb->mac_header
- core: fix flow symmetric hash
- bonding, team: unsync device addresses on ndo_stop
- phy: micrel: fix shared interrupt on LAN8814"
* tag 'net-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (83 commits)
selftests: forwarding: add shebang for sch_red.sh
bnxt: prevent skb UAF after handing over to PTP worker
net: marvell: Fix refcounting bugs in prestera_port_sfp_bind()
net: sched: fix possible refcount leak in tc_new_tfilter()
net: sunhme: Fix packet reception for len < RX_COPY_THRESHOLD
udp: Use WARN_ON_ONCE() in udp_read_skb()
selftests: bonding: cause oops in bond_rr_gen_slave_id
bonding: fix NULL deref in bond_rr_gen_slave_id
net: phy: micrel: fix shared interrupt on LAN8814
net/smc: Stop the CLC flow if no link to map buffers on
ice: Fix ice_xdp_xmit() when XDP TX queue number is not sufficient
net: atlantic: fix potential memory leak in aq_ndev_close()
can: gs_usb: gs_usb_set_phys_id(): return with error if identify is not supported
can: gs_usb: gs_can_open(): fix race dev->can.state condition
can: flexcan: flexcan_mailbox_read() fix return value for drop = true
net: sh_eth: Fix PHY state warning splat during system resume
net: ravb: Fix PHY state warning splat during system resume
netfilter: nf_ct_ftp: fix deadlock when nat rewrite is needed
netfilter: ebtables: fix memory leak when blob is malformed
netfilter: nf_tables: fix percpu memory leak at nf_tables_addchain()
...
The flag for need_wakeup is not set for xsks with `XDP_SHARED_UMEM`
flag and of different queue ids and/or devices. They should inherit
the flag from the first socket buffer pool since no flags can be
specified once `XDP_SHARED_UMEM` is specified.
Fixes: b5aea28dca ("xsk: Add shared umem support between queue ids")
Signed-off-by: Jalal Mostafa <jalal.a.mostapha@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20220921135701.10199-1-jalal.a.mostapha@gmail.com
tfilter_put need to be called to put the refount got by tp->ops->get to
avoid possible refcount leak when chain->tmplt_ops != NULL and
chain->tmplt_ops != tp->ops.
Fixes: 7d5509fa0d ("net: sched: extend proto ops with 'put' callback")
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Link: https://lore.kernel.org/r/20220921092734.31700-1-hbh25y@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, SMC uses smc->sk.sk_{rcv|snd}buf to create buffers for
send buffer and RMB. And the values of buffer size are from tcp_{w|r}mem
in clcsock.
The buffer size from TCP socket doesn't fit SMC well. Generally, buffers
are usually larger than TCP for SMC-R/-D to get higher performance, for
they are different underlay devices and paths.
So this patch unbinds buffer size from TCP, and introduces two sysctl
knobs to tune them independently. Also, these knobs are per net
namespace and work for containers.
Signed-off-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
SMC-R tests the viability of link by sending out TEST_LINK LLC
messages over RoCE fabric when connections on link have been
idle for a time longer than keepalive interval (testlink time).
But using tcp_keepalive_time as testlink time maybe not quite
suitable because it is default no less than two hours[1], which
is too long for single link to find peer dead. The active host
will still use peer-dead link (QP) sending messages, and can't
find out until get IB_WC_RETRY_EXC_ERR error CQEs, which takes
more time than TEST_LINK timeout (SMC_LLC_WAIT_TIME) normally.
So this patch introduces a independent sysctl for SMC-R to set
link keepalive time, in order to detect link down in time. The
default value is 30 seconds.
[1] https://www.rfc-editor.org/rfc/rfc1122#page-101
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
There might be a potential race between SMC-R buffer map and
link group termination.
smc_smcr_terminate_all() | smc_connect_rdma()
--------------------------------------------------------------
| smc_conn_create()
for links in smcibdev |
schedule links down |
| smc_buf_create()
| \- smcr_buf_map_usable_links()
| \- no usable links found,
| (rmb->mr = NULL)
|
| smc_clc_send_confirm()
| \- access conn->rmb_desc->mr[]->rkey
| (panic)
During reboot and IB device module remove, all links will be set
down and no usable links remain in link groups. In such situation
smcr_buf_map_usable_links() should return an error and stop the
CLC flow accessing to uninitialized mr.
Fixes: b9247544c1 ("net/smc: convert static link ID instances to support multiple links")
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Link: https://lore.kernel.org/r/1663656189-32090-1-git-send-email-guwen@linux.alibaba.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Florian Westphal says:
====================
netfilter patches for net-next
Remove GPL license copypastry in uapi files, those have SPDX tags.
From Christophe Jaillet.
Remove unused variable in rpfilter, from Guillaume Nault.
Rework gc resched delay computation in conntrack, from Antoine Tenart.
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: rpfilter: Remove unused variable 'ret'.
headers: Remove some left-over license text in include/uapi/linux/netfilter/
netfilter: conntrack: revisit the gc initial rescheduling bias
netfilter: conntrack: fix the gc rescheduling delay
====================
Link: https://lore.kernel.org/r/20220921095000.29569-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We've met the problem that when there is a vlan tag inside
GRE encapsulation, the match of num_of_vlans fails.
It is caused by the vlan tag inside GRE payload has been
counted into num_of_vlans, which is not expected.
One example packet is like this:
Ethernet II, Src: Broadcom_68:56:07 (00:10:18:68:56:07)
Dst: Broadcom_68:56:08 (00:10:18:68:56:08)
802.1Q Virtual LAN, PRI: 0, DEI: 0, ID: 100
Internet Protocol Version 4, Src: 192.168.1.4, Dst: 192.168.1.200
Generic Routing Encapsulation (Transparent Ethernet bridging)
Ethernet II, Src: Broadcom_68:58:07 (00:10:18:68:58:07)
Dst: Broadcom_68:58:08 (00:10:18:68:58:08)
802.1Q Virtual LAN, PRI: 0, DEI: 0, ID: 200
...
It should match the (num_of_vlans 1) rule, but it matches
the (num_of_vlans 2) rule.
The vlan tags inside the GRE or other tunnel encapsulated payload
should not be taken into num_of_vlans.
The fix is to stop counting the vlan number when the encapsulation
bit is set.
Fixes: 34951fcf26 ("flow_dissector: Add number of vlan tags dissector")
Signed-off-by: Qingqing Yang <qingqing.yang@broadcom.com>
Reviewed-by: Boris Sukholitko <boris.sukholitko@broadcom.com>
Link: https://lore.kernel.org/r/20220919074808.136640-1-qingqing.yang@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ISO events (CIS/BIS) shall only be relevant for connection with link
type of ISO_LINK, otherwise the controller is probably buggy or it is
the result of fuzzer tools such as syzkaller.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
hci_debugfs_create_conn shall check if conn->debugfs has already been
created and don't attempt to overwrite it.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
device_add shall not be called multiple times as stated in its
documentation:
'Do not call this routine or device_register() more than once for
any device structure'
Syzkaller reports a bug as follows [1]:
------------[ cut here ]------------
kernel BUG at lib/list_debug.c:33!
invalid opcode: 0000 [#1] PREEMPT SMP KASAN
[...]
Call Trace:
<TASK>
__list_add include/linux/list.h:69 [inline]
list_add_tail include/linux/list.h:102 [inline]
kobj_kset_join lib/kobject.c:164 [inline]
kobject_add_internal+0x18f/0x8f0 lib/kobject.c:214
kobject_add_varg lib/kobject.c:358 [inline]
kobject_add+0x150/0x1c0 lib/kobject.c:410
device_add+0x368/0x1e90 drivers/base/core.c:3452
hci_conn_add_sysfs+0x9b/0x1b0 net/bluetooth/hci_sysfs.c:53
hci_le_cis_estabilished_evt+0x57c/0xae0 net/bluetooth/hci_event.c:6799
hci_le_meta_evt+0x2b8/0x510 net/bluetooth/hci_event.c:7110
hci_event_func net/bluetooth/hci_event.c:7440 [inline]
hci_event_packet+0x63d/0xfd0 net/bluetooth/hci_event.c:7495
hci_rx_work+0xae7/0x1230 net/bluetooth/hci_core.c:4007
process_one_work+0x991/0x1610 kernel/workqueue.c:2289
worker_thread+0x665/0x1080 kernel/workqueue.c:2436
kthread+0x2e4/0x3a0 kernel/kthread.c:376
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306
</TASK>
Link: https://syzkaller.appspot.com/bug?id=da3246e2d33afdb92d66bc166a0934c5b146404a
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Tested-by: Hawkins Jiawei <yin31149@gmail.com>
Now, register_pernet_subsys() and register_netdevice_notifier() are both
after sock_register(). It can create PF_PACKET socket and process socket
once sock_register() successfully. It is possible PF_PACKET socket is
creating but register_pernet_subsys() and register_netdevice_notifier()
are not registered yet. Thus net->packet.sklist_lock and net->packet.sklist
will be accessed without initialization that is done in packet_net_init().
Although this is a low probability scenario.
Move register_pernet_subsys() and register_netdevice_notifier() to the
front in packet_init(). Correspondingly, adjust the unregister process
in packet_exit().
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Return value directly from pskb_trim_rcsum() instead of
getting value from redundant variable err.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Jinpeng Cui <cui.jinpeng2@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 91a178258a ("netfilter: rpfilter: Convert
rpfilter_lookup_reverse to new dev helper") removed the need for the
'ret' variable. This went unnoticed because of the __maybe_unused
annotation.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
The previous commit changed the way the rescheduling delay is computed
which has a side effect: the bias is now represented as much as the
other entries in the rescheduling delay which makes the logic to kick in
only with very large sets, as the initial interval is very large
(INT_MAX).
Revisit the GC initial bias to allow more frequent GC for smaller sets
while still avoiding wakeups when a machine is mostly idle. We're moving
from a large initial value to pretending we have 100 entries expiring at
the upper bound. This way only a few entries having a small timeout
won't impact much the rescheduling delay and non-idle machines will have
enough entries to lower the delay when needed. This also improves
readability as the initial bias is now linked to what is computed
instead of being an arbitrary large value.
Fixes: 2cfadb761d ("netfilter: conntrack: revisit gc autotuning")
Suggested-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Commit 2cfadb761d ("netfilter: conntrack: revisit gc autotuning")
changed the eviction rescheduling to the use average expiry of scanned
entries (within 1-60s) by doing:
for (...) {
expires = clamp(nf_ct_expires(tmp), ...);
next_run += expires;
next_run /= 2;
}
The issue is the above will make the average ('next_run' here) more
dependent on the last expiration values than the firsts (for sets > 2).
Depending on the expiration values used to compute the average, the
result can be quite different than what's expected. To fix this we can
do the following:
for (...) {
expires = clamp(nf_ct_expires(tmp), ...);
next_run += (expires - next_run) / ++count;
}
Fixes: 2cfadb761d ("netfilter: conntrack: revisit gc autotuning")
Cc: Florian Westphal <fw@strlen.de>
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
use tc_cls_stats_dump() in filter.
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use zeroing allocator rather than allocator followed by memset with 0
Generated by: scripts/coccinelle/api/alloc/zalloc-simple.cocci
Signed-off-by: Yihao Han <hanyihao@vivo.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
We can't use ct->lock, this is already used by the seqadj internals.
When using ftp helper + nat, seqadj will attempt to acquire ct->lock
again.
Revert back to a global lock for now.
Fixes: c783a29c7e ("netfilter: nf_ct_ftp: prefer skb_linearize")
Reported-by: Bruno de Paula Larini <bruno.larini@riosoft.com.br>
Signed-off-by: Florian Westphal <fw@strlen.de>
The bug fix was incomplete, it "replaced" crash with a memory leak.
The old code had an assignment to "ret" embedded into the conditional,
restore this.
Fixes: 7997eff828 ("netfilter: ebtables: reject blobs that don't provide all entry points")
Reported-and-tested-by: syzbot+a24c5252f3e3ab733464@syzkaller.appspotmail.com
Signed-off-by: Florian Westphal <fw@strlen.de>
It seems to me that percpu memory for chain stats started leaking since
commit 3bc158f8d0 ("netfilter: nf_tables: map basechain priority to
hardware priority") when nft_chain_offload_priority() returned an error.
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Fixes: 3bc158f8d0 ("netfilter: nf_tables: map basechain priority to hardware priority")
Signed-off-by: Florian Westphal <fw@strlen.de>
syzbot is reporting underflow of nft_counters_enabled counter at
nf_tables_addchain() [1], for commit 43eb8949cf ("netfilter:
nf_tables: do not leave chain stats enabled on error") missed that
nf_tables_chain_destroy() after nft_basechain_init() in the error path of
nf_tables_addchain() decrements the counter because nft_basechain_init()
makes nft_is_base_chain() return true by setting NFT_CHAIN_BASE flag.
Increment the counter immediately after returning from
nft_basechain_init().
Link: https://syzkaller.appspot.com/bug?extid=b5d82a651b71cd8a75ab [1]
Reported-by: syzbot <syzbot+b5d82a651b71cd8a75ab@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Tested-by: syzbot <syzbot+b5d82a651b71cd8a75ab@syzkaller.appspotmail.com>
Fixes: 43eb8949cf ("netfilter: nf_tables: do not leave chain stats enabled on error")
Signed-off-by: Florian Westphal <fw@strlen.de>
We're seeing the following new warnings on netdev/build_32bit and
netdev/build_allmodconfig_warn CI jobs:
../net/core/filter.c:8608:1: warning: symbol
'nf_conn_btf_access_lock' was not declared. Should it be static?
../net/core/filter.c:8611:5: warning: symbol 'nfct_bsa' was not
declared. Should it be static?
Fix by ensuring extern declaration is present while compiling filter.o.
Fixes: 864b656f82 ("bpf: Add support for writing to nf_conn:mark")
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Link: https://lore.kernel.org/r/2bd2e0283df36d8a4119605878edb1838d144174.1663683114.git.dxu@dxuuu.xyz
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
It makes little sense to ask if networking namespace or net device refcount
tracking shall be enabled for debug kernel builds without network support.
This is similar to the commit eb0b39efb7 ("net: CONFIG_DEBUG_NET depends
on CONFIG_NET").
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Link: https://lore.kernel.org/r/20220915124256.32512-1-lukas.bulwahn@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Martin KaFai Lau