[ Upstream commit 9083977dab ]
Fix below warning coming because of using mutex lock in atomic context.
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:98
in_atomic(): 1, irqs_disabled(): 0, pid: 585, name: sh
Preemption disabled at: __radix_tree_preload+0x28/0x130
Call trace:
dump_backtrace+0x0/0x2b4
show_stack+0x20/0x28
dump_stack+0xa8/0xe0
___might_sleep+0x144/0x194
__might_sleep+0x58/0x8c
mutex_lock+0x2c/0x48
f2fs_trace_pid+0x88/0x14c
f2fs_set_node_page_dirty+0xd0/0x184
Do not use f2fs_radix_tree_insert() to avoid doing cond_resched() with
spin_lock() acquired.
Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e4589fa545 ]
When there is a failure in f2fs_fill_super() after/during
the recovery of fsync'd nodes, it frees the current sbi and
retries again. This time the mount is successful, but the files
that got recovered before retry, still holds the extent tree,
whose extent nodes list is corrupted since sbi and sbi->extent_list
is freed up. The list_del corruption issue is observed when the
file system is getting unmounted and when those recoverd files extent
node is being freed up in the below context.
list_del corruption. prev->next should be fffffff1e1ef5480, but was (null)
<...>
kernel BUG at kernel/msm-4.14/lib/list_debug.c:53!
lr : __list_del_entry_valid+0x94/0xb4
pc : __list_del_entry_valid+0x94/0xb4
<...>
Call trace:
__list_del_entry_valid+0x94/0xb4
__release_extent_node+0xb0/0x114
__free_extent_tree+0x58/0x7c
f2fs_shrink_extent_tree+0xdc/0x3b0
f2fs_leave_shrinker+0x28/0x7c
f2fs_put_super+0xfc/0x1e0
generic_shutdown_super+0x70/0xf4
kill_block_super+0x2c/0x5c
kill_f2fs_super+0x44/0x50
deactivate_locked_super+0x60/0x8c
deactivate_super+0x68/0x74
cleanup_mnt+0x40/0x78
__cleanup_mnt+0x1c/0x28
task_work_run+0x48/0xd0
do_notify_resume+0x678/0xe98
work_pending+0x8/0x14
Fix this by not creating extents for those recovered files if shrinker is
not registered yet. Once mount is successful and shrinker is registered,
those files can have extents again.
Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f6176473a0 ]
When call f2fs_acl_create_masq() failed, the caller f2fs_acl_create()
should return -EIO instead of -ENOMEM, this patch makes it consistent
with posix_acl_create() which has been fixed in commit beaf226b86
("posix_acl: don't ignore return value of posix_acl_create_masq()").
Fixes: 83dfe53c18 ("f2fs: fix reference leaks in f2fs_acl_create")
Signed-off-by: Tiezhu Yang <kernelpatch@126.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2866fb16d6 ]
The following race could lead to inconsistent SIT bitmap:
Task A Task B
====== ======
f2fs_write_checkpoint
block_operations
f2fs_lock_all
down_write(node_change)
down_write(node_write)
... sync ...
up_write(node_change)
f2fs_file_write_iter
set_inode_flag(FI_NO_PREALLOC)
......
f2fs_write_begin(index=0, has inline data)
prepare_write_begin
__do_map_lock(AIO) => down_read(node_change)
f2fs_convert_inline_page => update SIT
__do_map_lock(AIO) => up_read(node_change)
f2fs_flush_sit_entries <= inconsistent SIT
finish write checkpoint
sudden-power-off
If SPO occurs after checkpoint is finished, SIT bitmap will be set
incorrectly.
Signed-off-by: Sheng Yong <shengyong1@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b61ac5b720 ]
This patch move dir data flush to write checkpoint process, by
doing this, it may reduce some time for dir fsync.
pre:
-f2fs_do_sync_file enter
-file_write_and_wait_range <- flush & wait
-write_checkpoint
-do_checkpoint <- wait all
-f2fs_do_sync_file exit
now:
-f2fs_do_sync_file enter
-write_checkpoint
-block_operations <- flush dir & no wait
-do_checkpoint <- wait all
-f2fs_do_sync_file exit
Signed-off-by: Yunlei He <heyunlei@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 0ea295dd85 upstream.
The function truncate_node frees the page with f2fs_put_page. However,
the page index is read after that. So, the patch reads the index before
freeing the page.
Fixes: bf39c00a9a ("f2fs: drop obsolete node page when it is truncated")
Cc: <stable@vger.kernel.org>
Signed-off-by: Pan Bian <bianpan2016@163.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 88960068f2 upstream.
Treat "block_count" from struct f2fs_super_block as 64-bit little endian
value in sanity_check_raw_super() because struct f2fs_super_block
declares "block_count" as "__le64".
This fixes a bug where the superblock validation fails on big endian
devices with the following error:
F2FS-fs (sda1): Wrong segment_count / block_count (61439 > 0)
F2FS-fs (sda1): Can't find valid F2FS filesystem in 1th superblock
F2FS-fs (sda1): Wrong segment_count / block_count (61439 > 0)
F2FS-fs (sda1): Can't find valid F2FS filesystem in 2th superblock
As result of this the partition cannot be mounted.
With this patch applied the superblock validation works fine and the
partition can be mounted again:
F2FS-fs (sda1): Mounted with checkpoint version = 7c84
My little endian x86-64 hardware was able to mount the partition without
this fix.
To confirm that mounting f2fs filesystems works on big endian machines
again I tested this on a 32-bit MIPS big endian (lantiq) device.
Fixes: 0cfe75c5b0 ("f2fs: enhance sanity_check_raw_super() to avoid potential overflows")
Cc: stable@vger.kernel.org
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This was done as part of commit 5d64600d4f "f2fs: avoid bug_on on
corrupted inode" upstream, but the specific check that commit added is
not applicable to 4.14.
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit e1da7872f6 upstream.
This patch introduces verify_blkaddr to check meta/data block address
with valid range to detect bug earlier.
In addition, once we encounter an invalid blkaddr, notice user to run
fsck to fix, and let the kernel panic.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
[bwh: Backported to 4.14: I skipped an earlier renaming of
is_valid_meta_blkaddr() to f2fs_is_valid_meta_blkaddr()]
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 7b525dd013 upstream.
- rename is_valid_blkaddr() to is_valid_meta_blkaddr() for readability.
- introduce is_valid_blkaddr() for cleanup.
No logic change in this patch.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 0cfe75c5b0 upstream.
In order to avoid the below overflow issue, we should have checked the
boundaries in superblock before reaching out to allocation. As Linus suggested,
the right place should be sanity_check_raw_super().
Dr Silvio Cesare of InfoSect reported:
There are integer overflows with using the cp_payload superblock field in the
f2fs filesystem potentially leading to memory corruption.
include/linux/f2fs_fs.h
struct f2fs_super_block {
...
__le32 cp_payload;
fs/f2fs/f2fs.h
typedef u32 block_t; /*
* should not change u32, since it is the on-disk block
* address format, __le32.
*/
...
static inline block_t __cp_payload(struct f2fs_sb_info *sbi)
{
return le32_to_cpu(F2FS_RAW_SUPER(sbi)->cp_payload);
}
fs/f2fs/checkpoint.c
block_t start_blk, orphan_blocks, i, j;
...
start_blk = __start_cp_addr(sbi) + 1 + __cp_payload(sbi);
orphan_blocks = __start_sum_addr(sbi) - 1 - __cp_payload(sbi);
+++ integer overflows
...
unsigned int cp_blks = 1 + __cp_payload(sbi);
...
sbi->ckpt = kzalloc(cp_blks * blk_size, GFP_KERNEL);
+++ integer overflow leading to incorrect heap allocation.
int cp_payload_blks = __cp_payload(sbi);
...
ckpt->cp_pack_start_sum = cpu_to_le32(1 + cp_payload_blks +
orphan_blocks);
+++ sign bug and integer overflow
...
for (i = 1; i < 1 + cp_payload_blks; i++)
+++ integer overflow
...
sbi->max_orphans = (sbi->blocks_per_seg - F2FS_CP_PACKS -
NR_CURSEG_TYPE - __cp_payload(sbi)) *
F2FS_ORPHANS_PER_BLOCK;
+++ integer overflow
Reported-by: Greg KH <greg@kroah.com>
Reported-by: Silvio Cesare <silvio.cesare@gmail.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
[bwh: Backported to 4.14: No hot file extension support]
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 0833721ec3 upstream.
This patch check blkaddr more accuratly before issue a
write or read bio.
Signed-off-by: Yunlei He <heyunlei@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 164a63fa6b upstream.
This reverts commit 66110abc4c.
If we clear the cold data flag out of the writeback flow, we can miscount
-1 by end_io, which incurs a deadlock caused by all I/Os being blocked during
heavy GC.
Balancing F2FS Async:
- IO (CP: 1, Data: -1, Flush: ( 0 0 1), Discard: ( ...
GC thread: IRQ
- move_data_page()
- set_page_dirty()
- clear_cold_data()
- f2fs_write_end_io()
- type = WB_DATA_TYPE(page);
here, we get wrong type
- dec_page_count(sbi, type);
- f2fs_wait_on_page_writeback()
Cc: <stable@vger.kernel.org>
Reported-and-Tested-by: Park Ju Hyung <qkrwngud825@gmail.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 2a96d8ad94 ]
"ret" can be uninitialized on the success path when "in ==
F2FS_GOING_DOWN_FULLSYNC".
Fixes: 60b2b4ee2b ("f2fs: Fix deadlock in shutdown ioctl")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 6aead1617b ]
In error path of f2fs_move_rehashed_dirents, inode page could be writeback
state, so we should wait on inode page writeback before updating it.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 4b270a8cc5 ]
In synchronous scenario, like in checkpoint(), we are going to flush
dirty node pages to device synchronously, we can easily failed
writebacking node page due to trylock_page() failure, especially in
condition of intensive lock competition, which can cause long latency
of checkpoint(). So let's use lock_page() in synchronous scenario to
avoid this issue.
Signed-off-by: Yunlei He <heyunlei@huawei.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit cb15d1e43d ]
Fix build warnings in f2fs when CONFIG_PROC_FS is not enabled
by marking the unused functions as __maybe_unused.
../fs/f2fs/sysfs.c:519:12: warning: 'segment_info_seq_show' defined but not used [-Wunused-function]
../fs/f2fs/sysfs.c:546:12: warning: 'segment_bits_seq_show' defined but not used [-Wunused-function]
../fs/f2fs/sysfs.c:570:12: warning: 'iostat_info_seq_show' defined but not used [-Wunused-function]
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Chao Yu <yuchao0@huawei.com>
Cc: linux-f2fs-devel@lists.sourceforge.net
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 3611ce9911 ]
For the case when sbi->segs_per_sec > 1, take section:segment = 5 for
example, if segment 1 is just used and allocate new segment 2, and the
blocks of segment 1 is invalidated, at this time, the previous code will
use __set_test_and_free to free the free_secmap and free_sections++,
this is not correct since it is still a current section, so fix it.
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 82cf4f132e ]
If config CONFIG_F2FS_FAULT_INJECTION is on, for both read or write path
we will call find_lock_page() to get the page, but for read path, it
missed to passing FGP_ACCESSED to allocator to active the page in LRU
list, result in being reclaimed in advance incorrectly, fix it.
Reported-by: Xianrong Zhou <zhouxianrong@huawei.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 66110abc4c ]
PG_checked flag will be set on data page during GC, later, we can
recognize such page by the flag and migrate page to cold segment.
But previously, we don't clear this flag when invalidating data page,
after page redirtying, we will write it into wrong log.
Let's clear PG_checked flag in set_page_dirty() to avoid this.
Signed-off-by: Weichao Guo <guoweichao@huawei.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 5b19d284f5 ]
pageout() in MM traslates EAGAIN, so calls handle_write_error()
-> mapping_set_error() -> set_bit(AS_EIO, ...).
file_write_and_wait_range() will see EIO error, which is critical
to return value of fsync() followed by atomic_write failure to user.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit c22aecd759 ]
dquot_initialize() can fail due to any exception inside quota subsystem,
f2fs needs to be aware of it, and return correct return value to caller.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e5e5732d81 ]
After revoking atomic write, related LBA can be reused by others, so we
need to wait page writeback before reusing the LBA, in order to avoid
interference between old atomic written in-flight IO and new IO.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 14a28559f4 ]
This patch fixes error path of move_data_page:
- clear cold data flag if it fails to write page.
- redirty page for non-ENOMEM case.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 4071e67cff ]
The following patch disables loading of f2fs module on architectures
which have PAGE_SIZE > 4096 , since it is impossible to mount f2fs on
such architectures , log messages are:
mount: /mnt: wrong fs type, bad option, bad superblock on
/dev/vdiskb1, missing codepage or helper program, or other error.
/dev/vdiskb1: F2FS filesystem,
UUID=1d8b9ca4-2389-4910-af3b-10998969f09c, volume name ""
May 15 18:03:13 ttip kernel: F2FS-fs (vdiskb1): Invalid
page_cache_size (8192), supports only 4KB
May 15 18:03:13 ttip kernel: F2FS-fs (vdiskb1): Can't find valid F2FS
filesystem in 1th superblock
May 15 18:03:13 ttip kernel: F2FS-fs (vdiskb1): Invalid
page_cache_size (8192), supports only 4KB
May 15 18:03:13 ttip kernel: F2FS-fs (vdiskb1): Can't find valid F2FS
filesystem in 2th superblock
May 15 18:03:13 ttip kernel: F2FS-fs (vdiskb1): Invalid
page_cache_size (8192), supports only 4KB
which was introduced by git commit 5c9b469295
tested on git kernel 4.17.0-rc6-00309-gec30dcf7f425
with patch applied:
modprobe: ERROR: could not insert 'f2fs': Invalid argument
May 28 01:40:28 v215 kernel: F2FS not supported on PAGE_SIZE(8192) != 4096
Signed-off-by: Anatoly Pugachev <matorola@gmail.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dc7a10ddee upstream.
If write is failed, we must deallocate the blocks that we couldn't write.
Cc: stable@vger.kernel.org
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit bf617f7a92 ]
If noextent_cache mount option is on, we will never initialize extent tree
in inode, but still we're going to access it in f2fs_drop_extent_tree,
result in kernel panic as below:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000038
IP: _raw_write_lock+0xc/0x30
Call Trace:
? f2fs_drop_extent_tree+0x41/0x70 [f2fs]
f2fs_fallocate+0x5a0/0xdd0 [f2fs]
? common_file_perm+0x47/0xc0
? apparmor_file_permission+0x1a/0x20
vfs_fallocate+0x15b/0x290
SyS_fallocate+0x44/0x70
do_syscall_64+0x6e/0x160
entry_SYSCALL64_slow_path+0x25/0x25
This patch fixes to check extent cache status before using in
f2fs_drop_extent_tree.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit cd36d7a17f ]
Once CP_TRIMMED_FLAG is set, after a reboot, we will never issue discard
before LBA becomes invalid again, fix it by clearing the flag in
checkpoint without CP_TRIMMED reason.
Fixes: 1f43e2ad7b ("f2fs: introduce CP_TRIMMED_FLAG to avoid unneeded discard")
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 17cd07ae95 ]
As Jayashree Mohan reported:
A simple workload to reproduce this would be :
1. create foo
2. Write (8K - 16K) // foo size = 16K now
3. fsync()
4. falloc zero_range , keep_size (4202496 - 4210688) // foo size must be 16K
5. fdatasync()
Crash now
On recovery, we see that the file size is 4210688 and not 16K, which
violates the semantics of keep_size flag. We have a test case to
reproduce this using CrashMonkey on 4.15 kernel. Try this out by
simply running :
./c_harness -f /dev/sda -d /dev/cow_ram0 -t f2fs -e 102400 -P -v
tests/generic_468_zero.so
The root cause is that we miss to set KEEP_SIZE bit correctly in zero_range
when zeroing block cross EOF with FALLOC_FL_KEEP_SIZE, let's fix this
missing case.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1e2e547a93 upstream.
For anything NFS-exported we do _not_ want to unlock new inode
before it has grown an alias; original set of fixes got the
ordering right, but missed the nasty complication in case of
lockdep being enabled - unlock_new_inode() does
lockdep_annotate_inode_mutex_key(inode)
which can only be done before anyone gets a chance to touch
->i_mutex. Unfortunately, flipping the order and doing
unlock_new_inode() before d_instantiate() opens a window when
mkdir can race with open-by-fhandle on a guessed fhandle, leading
to multiple aliases for a directory inode and all the breakage
that follows from that.
Correct solution: a new primitive (d_instantiate_new())
combining these two in the right order - lockdep annotate, then
d_instantiate(), then the rest of unlock_new_inode(). All
combinations of d_instantiate() with unlock_new_inode() should
be converted to that.
Cc: stable@kernel.org # 2.6.29 and later
Tested-by: Mike Marshall <hubcap@omnibond.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b94929d975 upstream.
Commit 7a20b8a61e ("f2fs: allocate node
and hot data in the beginning of partition") introduces another mount
option, heap, to reset it back. But it does not do anything for heap
mode, so fix it.
Cc: stable@vger.kernel.org
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 28cfafb738 ]
We need to clear FI_NO_PREALLOC flag in error path of f2fs_file_write_iter,
otherwise we will lose the chance to preallocate blocks in latter write()
at one time.
Fixes: dc91de78e5 ("f2fs: do not preallocate blocks which has wrong buffer")
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5b4267d195 upstream.
If there's some data written through inline data or dentry, we need to shouw
st_blocks. This fixes reporting zero blocks even though there is small written
data.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
[Jaegeuk Kim: avoid link file for quotacheck]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As Ju Hyung Park reported:
"When 'fstrim' is called for manual trim, a BUG() can be triggered
randomly with this patch.
I'm seeing this issue on both x86 Desktop and arm64 Android phone.
On x86 Desktop, this was caused during Ubuntu boot-up. I have a
cronjob installed which calls 'fstrim -v /' during boot. On arm64
Android, this was caused during GC looping with 1ms gc_min_sleep_time
& gc_max_sleep_time."
Root cause of this issue is that f2fs_wait_discard_bios can only be
used by f2fs_put_super, because during put_super there must be no
other referrers, so it can ignore discard entry's reference count
when removing the entry, otherwise in other caller we will hit bug_on
in __remove_discard_cmd as there may be other issuer added reference
count in discard entry.
Thread A Thread B
- issue_discard_thread
- f2fs_ioc_fitrim
- f2fs_trim_fs
- f2fs_wait_discard_bios
- __issue_discard_cmd
- __submit_discard_cmd
- __wait_discard_cmd
- dc->ref++
- __wait_one_discard_bio
- __wait_discard_cmd
- __remove_discard_cmd
- f2fs_bug_on(sbi, dc->ref)
Fixes: 969d1b180d
Reported-by: Ju Hyung Park <qkrwngud825@gmail.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In this round, we've mostly tuned f2fs to provide better user experience
for Android. Especially, we've worked on atomic write feature again with
SQLite community in order to support it officially. And we added or modified
several facilities to analyze and enhance IO behaviors.
Major changes include:
- add app/fs io stat
- add inode checksum feature
- support project/journalled quota
- enhance atomic write with new ioctl() which exposes feature set
- enhance background gc/discard/fstrim flows with new gc_urgent mode
- add F2FS_IOC_FS{GET,SET}XATTR
- fix some quota flows
-----BEGIN PGP SIGNATURE-----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=w4KH
-----END PGP SIGNATURE-----
Merge tag 'f2fs-for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"In this round, we've mostly tuned f2fs to provide better user
experience for Android. Especially, we've worked on atomic write
feature again with SQLite community in order to support it officially.
And we added or modified several facilities to analyze and enhance IO
behaviors.
Major changes include:
- add app/fs io stat
- add inode checksum feature
- support project/journalled quota
- enhance atomic write with new ioctl() which exposes feature set
- enhance background gc/discard/fstrim flows with new gc_urgent mode
- add F2FS_IOC_FS{GET,SET}XATTR
- fix some quota flows"
* tag 'f2fs-for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (63 commits)
f2fs: hurry up to issue discard after io interruption
f2fs: fix to show correct discard_granularity in sysfs
f2fs: detect dirty inode in evict_inode
f2fs: clear radix tree dirty tag of pages whose dirty flag is cleared
f2fs: speed up gc_urgent mode with SSR
f2fs: better to wait for fstrim completion
f2fs: avoid race in between read xattr & write xattr
f2fs: make get_lock_data_page to handle encrypted inode
f2fs: use generic terms used for encrypted block management
f2fs: introduce f2fs_encrypted_file for clean-up
Revert "f2fs: add a new function get_ssr_cost"
f2fs: constify super_operations
f2fs: fix to wake up all sleeping flusher
f2fs: avoid race in between atomic_read & atomic_inc
f2fs: remove unneeded parameter of change_curseg
f2fs: update i_flags correctly
f2fs: don't check inode's checksum if it was dirtied or writebacked
f2fs: don't need to update inode checksum for recovery
f2fs: trigger fdatasync for non-atomic_write file
f2fs: fix to avoid race in between aio and gc
...
Once we encounter I/O interruption during issuing discards, we will delay
long time before next round, but if system status is I/O idle during the
time, it may loses opportunity to issue discards. So this patch changes
to hurry up to issue discard after io interruption.
Besides, this patch also fixes to issue discards accurately with assigned
rate.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Add a bugon in f2fs_evict_inode to detect inconsistent status between
inode cache and related node page cache.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
On a senario like writing out the first dirty page of the inode
as the inline data, we only cleared dirty flags of the pages, but
didn't clear the dirty tags of those pages in the radix tree.
If we don't clear the dirty tags of the pages in the radix tree, the
inodes which contain the pages will be marked with I_DIRTY_PAGES again
and again, and writepages() for the inodes will be invoked in every
writeback period. As a result, nothing will be done in every
writepages() for the inodes and it will just consume CPU time
meaninglessly.
Signed-off-by: Daeho Jeong <daeho.jeong@samsung.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In android, we'd better wait for fstrim completion instead of issuing the
discard commands asynchronous.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Introduce a new migration mode that allow to offload the copy to a device
DMA engine. This changes the workflow of migration and not all
address_space migratepage callback can support this.
This is intended to be use by migrate_vma() which itself is use for thing
like HMM (see include/linux/hmm.h).
No additional per-filesystem migratepage testing is needed. I disables
MIGRATE_SYNC_NO_COPY in all problematic migratepage() callback and i
added comment in those to explain why (part of this patch). The commit
message is unclear it should say that any callback that wish to support
this new mode need to be aware of the difference in the migration flow
from other mode.
Some of these callbacks do extra locking while copying (aio, zsmalloc,
balloon, ...) and for DMA to be effective you want to copy multiple
pages in one DMA operations. But in the problematic case you can not
easily hold the extra lock accross multiple call to this callback.
Usual flow is:
For each page {
1 - lock page
2 - call migratepage() callback
3 - (extra locking in some migratepage() callback)
4 - migrate page state (freeze refcount, update page cache, buffer
head, ...)
5 - copy page
6 - (unlock any extra lock of migratepage() callback)
7 - return from migratepage() callback
8 - unlock page
}
The new mode MIGRATE_SYNC_NO_COPY:
1 - lock multiple pages
For each page {
2 - call migratepage() callback
3 - abort in all problematic migratepage() callback
4 - migrate page state (freeze refcount, update page cache, buffer
head, ...)
} // finished all calls to migratepage() callback
5 - DMA copy multiple pages
6 - unlock all the pages
To support MIGRATE_SYNC_NO_COPY in the problematic case we would need a
new callback migratepages() (for instance) that deals with multiple
pages in one transaction.
Because the problematic cases are not important for current usage I did
not wanted to complexify this patchset even more for no good reason.
Link: http://lkml.kernel.org/r/20170817000548.32038-14-jglisse@redhat.com
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Cc: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Nellans <dnellans@nvidia.com>
Cc: Evgeny Baskakov <ebaskakov@nvidia.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Mark Hairgrove <mhairgrove@nvidia.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Sherry Cheung <SCheung@nvidia.com>
Cc: Subhash Gutti <sgutti@nvidia.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Bob Liu <liubo95@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch refactors get_lock_data_page() to handle encryption case directly.
In order to do that, it introduces common f2fs_submit_page_read().
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Pull block layer updates from Jens Axboe:
"This is the first pull request for 4.14, containing most of the code
changes. It's a quiet series this round, which I think we needed after
the churn of the last few series. This contains:
- Fix for a registration race in loop, from Anton Volkov.
- Overflow complaint fix from Arnd for DAC960.
- Series of drbd changes from the usual suspects.
- Conversion of the stec/skd driver to blk-mq. From Bart.
- A few BFQ improvements/fixes from Paolo.
- CFQ improvement from Ritesh, allowing idling for group idle.
- A few fixes found by Dan's smatch, courtesy of Dan.
- A warning fixup for a race between changing the IO scheduler and
device remova. From David Jeffery.
- A few nbd fixes from Josef.
- Support for cgroup info in blktrace, from Shaohua.
- Also from Shaohua, new features in the null_blk driver to allow it
to actually hold data, among other things.
- Various corner cases and error handling fixes from Weiping Zhang.
- Improvements to the IO stats tracking for blk-mq from me. Can
drastically improve performance for fast devices and/or big
machines.
- Series from Christoph removing bi_bdev as being needed for IO
submission, in preparation for nvme multipathing code.
- Series from Bart, including various cleanups and fixes for switch
fall through case complaints"
* 'for-4.14/block' of git://git.kernel.dk/linux-block: (162 commits)
kernfs: checking for IS_ERR() instead of NULL
drbd: remove BIOSET_NEED_RESCUER flag from drbd_{md_,}io_bio_set
drbd: Fix allyesconfig build, fix recent commit
drbd: switch from kmalloc() to kmalloc_array()
drbd: abort drbd_start_resync if there is no connection
drbd: move global variables to drbd namespace and make some static
drbd: rename "usermode_helper" to "drbd_usermode_helper"
drbd: fix race between handshake and admin disconnect/down
drbd: fix potential deadlock when trying to detach during handshake
drbd: A single dot should be put into a sequence.
drbd: fix rmmod cleanup, remove _all_ debugfs entries
drbd: Use setup_timer() instead of init_timer() to simplify the code.
drbd: fix potential get_ldev/put_ldev refcount imbalance during attach
drbd: new disk-option disable-write-same
drbd: Fix resource role for newly created resources in events2
drbd: mark symbols static where possible
drbd: Send P_NEG_ACK upon write error in protocol != C
drbd: add explicit plugging when submitting batches
drbd: change list_for_each_safe to while(list_first_entry_or_null)
drbd: introduce drbd_recv_header_maybe_unplug
...
-----BEGIN PGP SIGNATURE-----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=LLY3
-----END PGP SIGNATURE-----
Merge tag 'wberr-v4.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux
Pull writeback error handling updates from Jeff Layton:
"This pile continues the work from last cycle on better tracking
writeback errors. In v4.13 we added some basic errseq_t infrastructure
and converted a few filesystems to use it.
This set continues refining that infrastructure, adds documentation,
and converts most of the other filesystems to use it. The main
exception at this point is the NFS client"
* tag 'wberr-v4.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux:
ecryptfs: convert to file_write_and_wait in ->fsync
mm: remove optimizations based on i_size in mapping writeback waits
fs: convert a pile of fsync routines to errseq_t based reporting
gfs2: convert to errseq_t based writeback error reporting for fsync
fs: convert sync_file_range to use errseq_t based error-tracking
mm: add file_fdatawait_range and file_write_and_wait
fuse: convert to errseq_t based error tracking for fsync
mm: consolidate dax / non-dax checks for writeback
Documentation: add some docs for errseq_t
errseq: rename __errseq_set to errseq_set
This patch renames functions regarding to buffer management via META_MAPPING
used for encrypted blocks especially. We can actually use them in generic way.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch replaces (f2fs_encrypted_inode() && S_ISREG()) with
f2fs_encrypted_file(), which gives no functional change.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This reverts commit b7b7c4cf1c.
se->ckpt_valid_blocks will never be smaller than se->valid_blocks, so just
remove get_ssr_cost.
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
super_operations are not supposed to change at runtime.
"struct super_block" working with super_operations provided
by <linux/fs.h> work with const super_operations. So mark
the non-const structs as const
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In scenario of remount_ro vs flush, after flush_thread exits in
->remount_fs, flusher will only clean up golbal issue_list, but
without waking up flushers waiting on that list, result in hang
related user threads.
In order to fix this issue, this patch enables the flusher to
take charge of issue_flush thread: executes merged flush command,
and wake up all sleeping flushers.
Fixes: 5eba8c5d1f ("f2fs: fix to access nullified flush_cmd_control pointer")
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Previously, we will miss merging flush command during fsync due to below
race condition:
Thread A Thread B Thread C
- f2fs_issue_flush
- atomic_read(&issing_flush)
- f2fs_issue_flush
- atomic_read(&issing_flush)
- f2fs_issue_flush
- atomic_read(&issing_flush)
- atomic_inc(&issing_flush)
- atomic_inc(&issing_flush)
- atomic_inc(&issing_flush)
- submit_flush_wait
- submit_flush_wait
- submit_flush_wait
It needs to use atomic_inc_return instead to avoid such race.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
allocate_segment_by_default is the only caller of change_curseg passing
@reuse with 'false', but commit 763bfe1bc5 ("f2fs: remove reusing any
prefree segments") removes the calling, after that, @reuse in
change_curseg always be true, so, let's clean up the unneeded parameter.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
f2fs enables hash-indexed directory by default, so we need to tag
FS_INDEX_FL in inode::i_flags during directory creataion, in order
to show correct status of inode in lsattr:
Before:
------------------- /mnt/f2fs/dir/
After:
-----------I------- /mnt/f2fs/dir/
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If another thread already made the page dirtied or writebacked, we must avoid
to verify checksum. If we got an error, we need to remove its uptodate as well.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch fixes "f2fs: support inode checksum".
The recovered inode page will be rewritten with valid checksum.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Sqlite only cares about synchronization of file data instead of other data
unrelated attribute of inode, so in commit flow, call fdatasync is enough.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
We won't wait DIO synchronously when doing AIO, so there will be potential
IO reorder in between AIO and GC, which will cause data corruption.
This patch adds inode_dio_wait to serialize aio and data GC to avoid this
issue.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If file offset is insane, we have to return error instead of kernel panic.
Reported-by: Eric Zhang <followme999@163.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If file was not opened with atomic write mode, but user uses atomic write
ioctl to fsync datas, in the flow, we should not fsync that file with
atomic write mode.
Fixes: 608514deba ("f2fs: set fsync mark only for the last dnode")
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch fixes to clear FI_HOT_DATA correctly in below path:
- error handling in f2fs_ioc_start_atomic_write
- after commit atomic write in f2fs_ioc_commit_atomic_write
- after drop atomic write in drop_inmem_pages
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In f2fs_issue_flush, due to out-of-order execution of CPU, wake_up can
be called before we insert issue_list, result in long latency of
wait_for_completion. Fix this by adding smp_mb() to force the order of
related codes.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
It's time to issue all the discard commands, if user sets the idle time.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This way we don't need a block_device structure to submit I/O. The
block_device has different life time rules from the gendisk and
request_queue and is usually only available when the block device node
is open. Other callers need to explicitly create one (e.g. the lightnvm
passthrough code, or the new nvme multipathing code).
For the actual I/O path all that we need is the gendisk, which exists
once per block device. But given that the block layer also does
partition remapping we additionally need a partition index, which is
used for said remapping in generic_make_request.
Note that all the block drivers generally want request_queue or
sometimes the gendisk, so this removes a layer of indirection all
over the stack.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit d618ebaf0a ("f2fs: enable small discard by default") enables
f2fs to issue 4K size discard in real-time discard mode. However, issuing
smaller discard may cost more lifetime but releasing less free space in
flash device. Since f2fs has ability of separating hot/cold data and
garbage collection, we can expect that small-sized invalid region would
expand soon with OPU, deletion or garbage collection on valid datas, so
it's better to delay or skip issuing smaller size discards, it could help
to reduce overmuch consumption of IO bandwidth and lifetime of flash
storage.
This patch makes f2fs selectng 64K size as its default minimal
granularity, and issue discard with the size which is not smaller than
minimal granularity. Also it exposes discard granularity as sysfs entry
for configuration in different scenario.
Jaegeuk Kim:
We must issue all the accumulated discard commands when fstrim is called.
So, I've added pend_list_tag[] to indicate whether we should issue the
commands or not. If tag sets P_ACTIVE or P_TRIM, we have to issue them.
P_TRIM is set once at a time, given fstrim trigger.
In addition, issue_discard_thread is calling too much due to the number of
discard commands remaining in the pending list. I added a timer to control
it likewise gc_thread.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
We need to check HOT_DATA to truncate any previous data block when doing
roll-forward recovery.
Cc: <stable@vger.kernel.org>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
During atomic committing, if we encounter -ENOMEM in revoke path, it's
better to give a chance to retry revoking.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If we set CP_ERROR_FLAG in roll-forward error, f2fs is no longer to proceed
any IOs due to f2fs_cp_error(). But, for example, if some stale data is involved
on roll-forward process, we're able to get -ENOENT, getting fs stuck.
If we get any error, let fill_super set SBI_NEED_FSCK and try to recover back
to stable point.
Cc: <stable@vger.kernel.org>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Currently, the two flags F2FS_GET_BLOCK_[READ|DIO] are totally equivalent
and can be used interchangably in all scenarios they are involved in.
Neither of the flags is referenced in f2fs_map_blocks(), making them both
the default case. To remove the ambiguity, this patch merges both flags
into F2FS_GET_BLOCK_DEFAULT, and introduces an enum for all distinct flags.
Signed-off-by: Qiuyang Sun <sunqiuyang@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch supports to enable f2fs to accept quota information through
mount option:
- {usr,grp,prj}jquota=<quota file path>
- jqfmt=<quota type>
Then, in ->mount flow, we can recover quota file during log replaying,
by this, journelled quota can be supported.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
[Jaegeuk Kim: Fix wrong return values.]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
While comparing signed and unsigned variables, compiler will converts the
signed value to unsigned one, due to this reason, {in,de}crease_sleep_time
may return overflowed result.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Sahitya Tummala