There are currently only two methods (xpcs_find_compat() and
xpcs_get_interfaces()) defined in the driver which loop over the available
interfaces. All of them rely on the xpcs_compat::num_interfaces field
value to get the total number of supported interfaces. Thus the interface
arrays are supposed to be filled with actual interface IDs and there is no
need in the dummy terminating ID placed at the end of the arrays.
Based on the above drop the PHY_INTERFACE_MODE_MAX entry from the
xpcs_2500basex_interfaces array and the PHY_INTERFACE_MODE_MAX-based
conditional statement from the xpcs_get_interfaces() method as redundant.
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet says:
====================
rtnetlink: reduce RTNL pressure for dumps
This series restarts the conversion of rtnl dump operations
to RCU protection, instead of requiring RTNL.
In this new attempt (prior one failed in 2011), I chose to
allow a gradual conversion of selected operations.
After this series, "ip -6 addr" and "ip -4 ro" no longer
need to acquire RTNL.
I refrained from changing inet_dump_ifaddr() and inet6_dump_addr()
to avoid merge conflicts because of two fixes in net tree.
I also started the work for "ip link" future conversion.
v2: rtnl_fill_link_ifmap() always emit IFLA_MAP (Jiri Pirko)
Added "nexthop: allow nexthop_mpath_fill_node()
to be called without RTNL" to avoid a lockdep splat (Ido Schimmel)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
We want to be able to run rtnl_fill_ifinfo() under RCU protection
instead of RTNL in the future.
dev->name_node items are already rcu protected.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use READ_ONCE() to read the following device fields:
dev->mem_start
dev->mem_end
dev->base_addr
dev->irq
dev->dma
dev->if_port
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
No longer hold RTNL while calling inet_dump_fib().
Also change return value for a completed dump:
Returning 0 instead of skb->len allows NLMSG_DONE
to be appended to the skb. User space does not have
to call us again to get a standalone NLMSG_DONE marker.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
nexthop_mpath_fill_node() will be potentially called
from contexts holding rcu_lock instead of RTNL.
Suggested-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/all/ZdZDWVdjMaQkXBgW@shredder/
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a new field into struct fib_dump_filter, to let callers
tell if they use RTNL locking or RCU.
This is used in the following patch, when inet_dump_fib()
no longer holds RTNL.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
No longer hold RTNL while calling inet6_dump_ifinfo()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Similarly to RTNL_FLAG_DOIT_UNLOCKED, this new flag
allows dump operations registered via rtnl_register()
or rtnl_register_module() to opt-out from RTNL protection.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In commit af65bdfce9 ("[NETLINK]: Switch cb_lock spinlock
to mutex and allow to override it"), Patrick McHardy used
a common mutex to protect both nlk->cb and the dump() operations.
The override is used for rtnl dumps, registered with
rntl_register() and rntl_register_module().
We want to be able to opt-out some dump() operations
to not acquire RTNL, so we need to protect nlk->cb
with a per socket mutex.
This patch renames nlk->cb_def_mutex to nlk->nl_cb_mutex
The optional pointer to the mutex used to protect dump()
call is stored in nlk->dump_cb_mutex
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
__netlink_dump_start() releases nlk->cb_mutex right before
calling netlink_dump() which grabs it again.
This seems dangerous, even if KASAN did not bother yet.
Add a @lock_taken parameter to netlink_dump() to let it
grab the mutex if called from netlink_recvmsg() only.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
__netlink_diag_dump() returns 1 if the dump is not complete,
zero if no error occurred.
If err variable is zero, this means the dump is complete:
We should not return skb->len in this case, but 0.
This allows NLMSG_DONE to be appended to the skb.
User space does not have to call us again only to get NLMSG_DONE.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Prepare inet6_dump_ifinfo() to run with RCU protection
instead of RTNL and use for_each_netdev_dump() interface.
Also properly return 0 at the end of a dump, avoiding
an extra recvmsg() system call and RTNL acquisition.
Note that RTNL-less dumps need core changes, coming later
in the series.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We want to use RCU protection instead of RTNL
for inet6_fill_ifinfo().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We want to no longer hold RTNL while calling inet6_fill_ifla6_attrs()
in the future. Add needed READ_ONCE()/WRITE_ONCE() annotations.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We want to be able to run rtnl_fill_ifinfo() under RCU protection
instead of RTNL in the future.
This patch prepares dev_get_iflink() and nla_put_iflink()
to run either with RTNL or RCU held.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jérémie Dautheribes says:
====================
Add support for TI DP83826 configuration
This short patch series introduces the possibility of overriding
some parameters which are latched by default by hardware straps on the
TI DP83826 PHY.
The settings that can be overridden include:
- Configuring the PHY in either MII mode or RMII mode.
- When in RMII mode, configuring the PHY in RMII slave mode or RMII
master mode.
The RMII master/slave mode is TI-specific and determines whether the PHY
operates from a 25MHz reference clock (master mode) or from a 50MHz
reference clock (slave mode).
While these features should be supported by all the TI DP8382x family,
I have only been able to test them on TI DP83826 hardware. Therefore,
support has been added specifically for this PHY in this patch series.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The TI DP83826 PHY can operate between two RMII modes:
- master mode (PHY operates from a 25MHz clock reference)
- slave mode (PHY operates from a 50MHz clock reference)
By default, the operation mode is configured by hardware straps.
Add support to configure the operation mode from within the driver.
Signed-off-by: Jérémie Dautheribes <jeremie.dautheribes@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The TI DP83826 PHY can operate in either MII mode or RMII mode.
By default, it is configured by straps.
It can also be configured by writing to the bit 5 of register 0x17 - RMII
and Status Register (RCSR).
When phydev->interface is rmii, rmii mode must be enabled, otherwise
mii mode must be set.
This prevents misconfiguration of hw straps.
Signed-off-by: Jérémie Dautheribes <jeremie.dautheribes@bootlin.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add property ti,rmii-mode to support selecting the RMII operation mode
between:
- master mode (PHY operates from a 25MHz clock reference)
- slave mode (PHY operates from a 50MHz clock reference)
If not set, the operation mode is configured by hardware straps.
Signed-off-by: Jérémie Dautheribes <jeremie.dautheribes@bootlin.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement bridge port isolation for KSZ switches. Enabling the isolation
of switch ports from each other while maintaining connectivity with the
CPU and other forwarding ports. For instance, to isolate swp1 and swp2
from each other, use the following commands:
- bridge link set dev swp1 isolated on
- bridge link set dev swp2 isolated on
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
devlink and ethtool have a trailing _ in the header guard. I must have
copy/pasted it into new guards, assuming it's a headers_install artifact.
This fixes build if system headers are old.
Fixes: 8f109e91b8 ("tools: ynl: include dpll and mptcp_pm in C codegen")
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240222234831.179181-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Make the local variable in GENL_REQ_ATTR_CHECK() const.
genl_info_dump() returns a const pointer, so the macro
is currently hard to use in genl dumps.
Link: https://lore.kernel.org/r/20240222222819.156320-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jiri Pirko says:
====================
tools: ynl: couple of cmdline enhancements
This is part of the original "netlink: specs: devlink: add the rest of
missing attribute definitions" set which was rejected [1]. These three
patches enhances the cmdline user comfort, allowing to pass flag
attribute with bool values and enum names instead of scalars.
[1] https://lore.kernel.org/all/20240220181004.639af931@kernel.org/
====================
Link: https://lore.kernel.org/r/20240222134351.224704-1-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
During decoding of messages coming from kernel, attribute values are
converted to enum names in case the attribute type is enum of bitfield32.
However, when user constructs json message, he has to pass plain scalar
values. See "state" "selector" and "value" attributes in following
examples:
$ sudo ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/dpll.yaml --do pin-set --json '{"id": 0, "parent-device": {"parent-id": 0, "state": 1}}'
$ sudo ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/devlink.yaml --do port-set --json '{"bus-name": "pci", "dev-name": "0000:08:00.1", "port-index": 98304, "port-function": {"caps": {"selector": 1, "value": 1 }}}'
Allow user to pass strings containing enum names, convert them to scalar
values to be encoded into Netlink message:
$ sudo ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/dpll.yaml --do pin-set --json '{"id": 0, "parent-device": {"parent-id": 0, "state": "connected"}}'
$ sudo ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/devlink.yaml --do port-set --json '{"bus-name": "pci", "dev-name": "0000:08:00.1", "port-index": 98304, "port-function": {"caps": {"selector": ["roce-bit"], "value": ["roce-bit"] }}}'
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20240222134351.224704-4-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As a preparation to handle enums for scalar values, unify the processing
of all scalar types in a single elif statement.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240222134351.224704-3-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The flag attr presence in Netlink message indicates value "true",
if it is missing in the message it means "false".
Allow user to specify attrname with value "true"/"false"
in json for flag attrs, treat "false" value properly.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20240222134351.224704-2-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
John Garry says:
====================
net: Don't bother filling in ethtool driver version
The drivers included in this series set the ethtool driver version to the
same as the default, UTS_RELEASE, so don't both doing this.
As noted by Masahiro in [0], with CONFIG_MODVERSIONS=y, some drivers could
be built as modules against a different kernel tree with differing
UTS_RELEASE. As such, these changes could lead to a change in behaviour.
However, defaulting to the core kernel UTS_RELEASE would be expected
behaviour.
[0] https://lore.kernel.org/all/CAK7LNASfTW+OMk1cJJWb4E6P+=k0FEsm_=6FDfDF_mTrxJCSMQ@mail.gmail.com/
====================
Link: https://lore.kernel.org/r/20240222090042.12609-1-john.g.garry@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* Update the Kernel Doc for gelic_descr_set_tx_cmdstat()
and gelic_net_setup_netdev() so that documented name
and the actual name of the function match.
* Move define of GELIC_ALIGN() so that it is no longer
between gelic_alloc_card_net() and it's Kernel Doc.
* Document netdev parameter of gelic_alloc_card_net()
in a way consistent to the documentation of other netdev parameters
in this file.
Addresses the following warnings flagged by ./scripts/kernel-doc -none:
.../ps3_gelic_net.c:711: warning: expecting prototype for gelic_net_set_txdescr_cmdstat(). Prototype was for gelic_descr_set_tx_cmdstat() instead
.../ps3_gelic_net.c:1474: warning: expecting prototype for gelic_ether_setup_netdev(). Prototype was for gelic_net_setup_netdev() instead
.../ps3_gelic_net.c:1528: warning: expecting prototype for gelic_alloc_card_net(). Prototype was for GELIC_ALIGN() instead
.../ps3_gelic_net.c:1531: warning: Function parameter or struct member 'netdev' not described in 'gelic_alloc_card_net'
Signed-off-by: Simon Horman <horms@kernel.org>
Acked-by: Geoff Levand <geoff@infradead.org>
Link: https://lore.kernel.org/r/20240221-ps3-gelic-kdoc-v1-1-7629216d1340@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mpls_gso_segment() assumes skb_inner_network_header() returns
a valid result:
mpls_hlen = skb_inner_network_header(skb) - skb_network_header(skb);
if (unlikely(!mpls_hlen || mpls_hlen % MPLS_HLEN))
goto out;
if (unlikely(!pskb_may_pull(skb, mpls_hlen)))
With syzbot reproducer, skb_inner_network_header() yields 0,
skb_network_header() returns 108, so this will
"pskb_may_pull(skb, -108)))" which triggers a newly added
DEBUG_NET_WARN_ON_ONCE() check:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 5068 at include/linux/skbuff.h:2723 pskb_may_pull_reason include/linux/skbuff.h:2723 [inline]
WARNING: CPU: 0 PID: 5068 at include/linux/skbuff.h:2723 pskb_may_pull include/linux/skbuff.h:2739 [inline]
WARNING: CPU: 0 PID: 5068 at include/linux/skbuff.h:2723 mpls_gso_segment+0x773/0xaa0 net/mpls/mpls_gso.c:34
[..]
skb_mac_gso_segment+0x383/0x740 net/core/gso.c:53
nsh_gso_segment+0x40a/0xad0 net/nsh/nsh.c:108
skb_mac_gso_segment+0x383/0x740 net/core/gso.c:53
__skb_gso_segment+0x324/0x4c0 net/core/gso.c:124
skb_gso_segment include/net/gso.h:83 [inline]
[..]
sch_direct_xmit+0x11a/0x5f0 net/sched/sch_generic.c:327
[..]
packet_sendmsg+0x46a9/0x6130 net/packet/af_packet.c:3113
[..]
First iteration of this patch made mpls_hlen signed and changed
test to error out to "mpls_hlen <= 0 || ..".
Eric Dumazet said:
> I was thinking about adding a debug check in skb_inner_network_header()
> if inner_network_header is zero (that would mean it is not 'set' yet),
> but this would trigger even after your patch.
So add new skb_inner_network_header_was_set() helper and use that.
The syzbot reproducer injects data via packet socket. The skb that gets
allocated and passed down the stack has ->protocol set to NSH (0x894f)
and gso_type set to SKB_GSO_UDP | SKB_GSO_DODGY.
This gets passed to skb_mac_gso_segment(), which sees NSH as ptype to
find a callback for. nsh_gso_segment() retrieves next type:
proto = tun_p_to_eth_p(nsh_hdr(skb)->np);
... which is MPLS (TUN_P_MPLS_UC). It updates skb->protocol and then
calls mpls_gso_segment(). Inner offsets are all 0, so mpls_gso_segment()
ends up with a negative header size.
In case more callers rely on silent handling of such large may_pull values
we could also 'legalize' this behaviour, either replacing the debug check
with (len > INT_MAX) test or removing it and instead adding a comment
before existing
if (unlikely(len > skb->len))
return SKB_DROP_REASON_PKT_TOO_SMALL;
test in pskb_may_pull_reason(), saying that this check also implicitly
takes care of callers that miscompute header sizes.
Cc: Simon Horman <horms@kernel.org>
Fixes: 219eee9c0d ("net: skbuff: add overflow debug check to pull/push helpers")
Reported-by: syzbot+99d15fcdb0132a1e1a82@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/00000000000043b1310611e388aa@google.com/raw
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20240222140321.14080-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, when you switch between branches or something like that and
rebuild, net/ethtool/ioctl.c has to be built again because it depends
on UTS_RELEASE.
By instead referencing a string variable stored in another object file,
this can be avoided.
Signed-off-by: Jann Horn <jannh@google.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20240220194244.2056384-1-jannh@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Serdes phy needs to operate at 2500 mode for 2.5G speed and 1000
mode for 1G/100M/10M speed.
Added changes to configure serdes phy and mac based on link speed.
Changing serdes phy speed involves multiple register writes for
serdes block. To avoid redundant write operations only update serdes
phy when new speed is different.
For 2500 speed MAC PCS autoneg needs to disabled. Added changes to
disable MAC PCS autoneg if ANE parameter is not set.
Signed-off-by: Sneh Shah <quic_snehshah@quicinc.com>
Tested-by: Abhishek Chauhan <quic_abchauha@quicinc.com> # sa8775p-ride
Reviewed-by: Abhishek Chauhan <quic_abchauha@quicinc.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Through the routine bond_mii_monitor(), bonding driver inspects and commits
the slave state changes. During the times when slave state change and
failure in aqcuiring rtnl lock happen at the same time, the routine
bond_mii_monitor() reschedules itself to come around after 1 msec to commit
the new state.
During this, it executes the routine bond_miimon_inspect() to re-inspect
the state chane and prints the corresponding slave state on to the console.
Hence we do see a message at every 1 msec till the rtnl lock is acquired
and state chage is committed.
This patch doesn't change how bond functions. It only simply limits this
kind of log flood.
Signed-off-by: Praveen Kumar Kannoju <praveen.kannoju@oracle.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Link: https://lore.kernel.org/r/20240221082752.4660-1-praveen.kannoju@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=GYgG
-----END PGP SIGNATURE-----
Merge tag 'nf-next-24-02-21' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Florian Westphal says:
====================
netfilter updates for net-next
1. Prefer KMEM_CACHE() macro to create kmem caches, from Kunwu Chan.
Patches 2 and 3 consolidate nf_log NULL checks and introduces
extra boundary checks on family and type to make it clear that no out
of bounds access will happen. No in-tree user currently passes such
values, but thats not clear from looking at the function.
From Pablo Neira Ayuso.
Patch 4, also from Pablo, gets rid of unneeded conditional in
nft_osf init function.
Patch 5, from myself, fixes erroneous Kconfig dependencies that
came in an earlier net-next pull request. This should get rid
of the xtables related build failure reports.
Patches 6 to 10 are an update to nftables' concatenated-ranges
set type to speed up element insertions. This series also
compacts a few data structures and cleans up a few oddities such
as reliance on ZERO_SIZE_PTR when asking to allocate a set with
no elements. From myself.
Patches 11 moves the nf_reinject function from the netfilter core
(vmlinux) into the nfnetlink_queue backend, the only location where
this is called from. Also from myself.
Patch 12, from Kees Cook, switches xtables' compat layer to use
unsafe_memcpy because xt_entry_target cannot easily get converted
to a real flexible array (its UAPI and used inside other structs).
* tag 'nf-next-24-02-21' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: x_tables: Use unsafe_memcpy() for 0-sized destination
netfilter: move nf_reinject into nfnetlink_queue modules
netfilter: nft_set_pipapo: use GFP_KERNEL for insertions
netfilter: nft_set_pipapo: speed up bulk element insertions
netfilter: nft_set_pipapo: shrink data structures
netfilter: nft_set_pipapo: do not rely on ZERO_SIZE_PTR
netfilter: nft_set_pipapo: constify lookup fn args where possible
netfilter: xtables: fix up kconfig dependencies
netfilter: nft_osf: simplify init path
netfilter: nf_log: validate nf_logger_find_get()
netfilter: nf_log: consolidate check for NULL logger in lookup function
netfilter: expect: Simplify the allocation of slab caches in nf_conntrack_expect_init
====================
Link: https://lore.kernel.org/r/20240221112637.5396-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With commit 34d21de99c ("net: Move {l,t,d}stats allocation to core and
convert veth & vrf"), stats allocation could be done on net core
instead of this driver.
With this new approach, the driver doesn't have to bother with error
handling (allocation failure checking, making sure free happens in the
right spot, etc). This is core responsibility now.
Remove the allocation in the ipv6/sit driver and leverage the network
core allocation.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240221161732.3026127-1-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix virtual vs physical address confusion. This does not fix a bug
since virtual and physical address spaces are currently the same.
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Link: https://lore.kernel.org/r/20240215080500.2616848-1-agordeev@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The third "new features" pull request for v6.9. This is a quick
followup to send commit 04edb5dc68 ("wifi: ath12k: Fix uninitialized
use of ret in ath12k_mac_allocate()") to fix the ath12k clang warning
introduced in the previous pull request.
We also have support for QCA2066 in ath11k, several new features in
ath12k and few other changes in drivers. In stack it's mostly cleanup
and refactoring.
Major changes:
ath12k
* firmware-2.bin support
* support having multiple identical PCI devices (firmware needs to
have ATH12K_FW_FEATURE_MULTI_QRTR_ID)
* QCN9274: support split-PHY devices
* WCN7850: enable Power Save Mode in station mode
* WCN7850: P2P support
ath11k:
* QCA6390 & WCN6855: support 2 concurrent station interfaces
* QCA2066 support
iwlwifi
* mvm: support wider-bandwidth OFDMA
* bump firmware API to 90 for BZ/SC devices
brcmfmac
* DMI nvram filename quirk for ACEPC W5 Pro
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmXXJpARHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZu2Twf/QZ5FVecvOu/qNQyUeaclXjNuFw0+cJpz
luVzxG54wh484L1dRAmsztwHPA78rLMcExZi2Zb9PszVv4V9mD6rHoV0ws/o86Gr
QTq+8To9sr9wJfooVRO1ifgfoiafxX2TYJ9yGR3XwkCDf5ROq9JLBOQWW8p0bO/M
UyWoMvSf/WBAjOHUfCQzPCVPQhyld7JL/V7LGMZGmdy3cPkWPVXmRMyHL9f3+vdq
O5/HxZBP4Dg3zEsUiOADmD/l+8wuf/Tebqt7uRJ4/sAHsmlEPzoZPsuNxy6FljYX
5fuZVpzmjGzdGV+YHidpbZl/9Shq/Bc7Cf7eTQZ70P9cL1kbZ7usIA==
=mcyY
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2024-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.9
The third "new features" pull request for v6.9. This is a quick
followup to send commit 04edb5dc68 ("wifi: ath12k: Fix uninitialized
use of ret in ath12k_mac_allocate()") to fix the ath12k clang warning
introduced in the previous pull request.
We also have support for QCA2066 in ath11k, several new features in
ath12k and few other changes in drivers. In stack it's mostly cleanup
and refactoring.
Major changes:
ath12k
* firmware-2.bin support
* support having multiple identical PCI devices (firmware needs to
have ATH12K_FW_FEATURE_MULTI_QRTR_ID)
* QCN9274: support split-PHY devices
* WCN7850: enable Power Save Mode in station mode
* WCN7850: P2P support
ath11k:
* QCA6390 & WCN6855: support 2 concurrent station interfaces
* QCA2066 support
iwlwifi
* mvm: support wider-bandwidth OFDMA
* bump firmware API to 90 for BZ/SC devices
brcmfmac
* DMI nvram filename quirk for ACEPC W5 Pro
* tag 'wireless-next-2024-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (75 commits)
wifi: wilc1000: revert reset line logic flip
wifi: brcmfmac: Add DMI nvram filename quirk for ACEPC W5 Pro
wifi: rtlwifi: set initial values for unexpected cases of USB endpoint priority
wifi: rtl8xxxu: check vif before using in rtl8xxxu_tx()
wifi: rtlwifi: rtl8192cu: Fix TX aggregation
wifi: wilc1000: remove AKM suite be32 conversion for external auth request
wifi: nl80211: refactor parsing CSA offsets
wifi: nl80211: force WLAN_AKM_SUITE_SAE in big endian in NL80211_CMD_EXTERNAL_AUTH
wifi: iwlwifi: load b0 version of ucode for HR1/HR2
wifi: iwlwifi: handle per-phy statistics from fw
wifi: iwlwifi: iwl-fh.h: fix kernel-doc issues
wifi: iwlwifi: api: fix kernel-doc reference
wifi: iwlwifi: mvm: unlock mvm if there is no primary link
wifi: iwlwifi: bump FW API to 90 for BZ/SC devices
wifi: iwlwifi: mvm: support PHY context version 6
wifi: iwlwifi: mvm: partially support PHY context version 6
wifi: iwlwifi: mvm: support wider-bandwidth OFDMA
wifi: cfg80211: use ML element parsing helpers
wifi: mac80211: align ieee80211_mle_get_bss_param_ch_cnt()
wifi: cfg80211: refactor RNR parsing
...
====================
Link: https://lore.kernel.org/r/20240222105205.CEC54C433F1@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Current release - regressions:
- af_unix: fix another unix GC hangup
Previous releases - regressions:
- core: fix a possible AF_UNIX deadlock
- bpf: fix NULL pointer dereference in sk_psock_verdict_data_ready()
- netfilter: nft_flow_offload: release dst in case direct xmit path is used
- bridge: switchdev: ensure MDB events are delivered exactly once
- l2tp: pass correct message length to ip6_append_data
- dccp/tcp: unhash sk from ehash for tb2 alloc failure after check_estalblished()
- tls: fixes for record type handling with PEEK
- devlink: fix possible use-after-free and memory leaks in devlink_init()
Previous releases - always broken:
- bpf: fix an oops when attempting to read the vsyscall
page through bpf_probe_read_kernel
- sched: act_mirred: use the backlog for mirred ingress
- netfilter: nft_flow_offload: fix dst refcount underflow
- ipv6: sr: fix possible use-after-free and null-ptr-deref
- mptcp: fix several data races
- phonet: take correct lock to peek at the RX queue
Misc:
- handful of fixes and reliability improvements for selftests
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=eUOc
-----END PGP SIGNATURE-----
Merge tag 'net-6.8.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bpf and netfilter.
Current release - regressions:
- af_unix: fix another unix GC hangup
Previous releases - regressions:
- core: fix a possible AF_UNIX deadlock
- bpf: fix NULL pointer dereference in sk_psock_verdict_data_ready()
- netfilter: nft_flow_offload: release dst in case direct xmit path
is used
- bridge: switchdev: ensure MDB events are delivered exactly once
- l2tp: pass correct message length to ip6_append_data
- dccp/tcp: unhash sk from ehash for tb2 alloc failure after
check_estalblished()
- tls: fixes for record type handling with PEEK
- devlink: fix possible use-after-free and memory leaks in
devlink_init()
Previous releases - always broken:
- bpf: fix an oops when attempting to read the vsyscall page through
bpf_probe_read_kernel
- sched: act_mirred: use the backlog for mirred ingress
- netfilter: nft_flow_offload: fix dst refcount underflow
- ipv6: sr: fix possible use-after-free and null-ptr-deref
- mptcp: fix several data races
- phonet: take correct lock to peek at the RX queue
Misc:
- handful of fixes and reliability improvements for selftests"
* tag 'net-6.8.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (72 commits)
l2tp: pass correct message length to ip6_append_data
net: phy: realtek: Fix rtl8211f_config_init() for RTL8211F(D)(I)-VD-CG PHY
selftests: ioam: refactoring to align with the fix
Fix write to cloned skb in ipv6_hop_ioam()
phonet/pep: fix racy skb_queue_empty() use
phonet: take correct lock to peek at the RX queue
net: sparx5: Add spinlock for frame transmission from CPU
net/sched: flower: Add lock protection when remove filter handle
devlink: fix port dump cmd type
net: stmmac: Fix EST offset for dwmac 5.10
tools: ynl: don't leak mcast_groups on init error
tools: ynl: make sure we always pass yarg to mnl_cb_run
net: mctp: put sock on tag allocation failure
netfilter: nf_tables: use kzalloc for hook allocation
netfilter: nf_tables: register hooks last when adding new chain/flowtable
netfilter: nft_flow_offload: release dst in case direct xmit path is used
netfilter: nft_flow_offload: reset dst in route object after setting up flow
netfilter: nf_tables: set dormant flag on hook register failure
selftests: tls: add test for peeking past a record of a different type
selftests: tls: add test for merging of same-type control messages
...
- While working on the ring buffer I noticed that the counter used
for knowing where the end of the data is on a sub-buffer was not
a full "int" but just 20 bits. It was masked out to 0xfffff.
With the new code that allows the user to change the size of the
sub-buffer, it is theoretically possible to ask for a size
bigger than 2^20. If that happens, unexpected results may
occur as there's no code checking if the counter overflowed the
20 bits of the write mask. There are other checks to make sure
events fit in the sub-buffer, but if the sub-buffer itself is
too big, that is not checked.
Add a check in the resize of the sub-buffer to make sure that it
never goes beyond the size of the counter that holds how much
data is on it.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZdaf+RQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qjEIAQDpsvHqUFNoG5fkRlWr2U0hNl5M6zLI
xTf2mWoG/h8bwQD+NfiRC2UrD5EaubO15z0z6MxScOl1H9X+iI7WVwZkqQ8=
=txOr
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fix from Steven Rostedt:
- While working on the ring buffer I noticed that the counter used for
knowing where the end of the data is on a sub-buffer was not a full
"int" but just 20 bits. It was masked out to 0xfffff.
With the new code that allows the user to change the size of the
sub-buffer, it is theoretically possible to ask for a size bigger
than 2^20. If that happens, unexpected results may occur as there's
no code checking if the counter overflowed the 20 bits of the write
mask. There are other checks to make sure events fit in the
sub-buffer, but if the sub-buffer itself is too big, that is not
checked.
Add a check in the resize of the sub-buffer to make sure that it
never goes beyond the size of the counter that holds how much data is
on it.
* tag 'trace-v6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ring-buffer: Do not let subbuf be bigger than write mask
Michael Chan says:
====================
bnxt_en: Ntuple filter improvements
The current Ntuple filter implementation has a limitation on 5750X (P5)
and newer chips. The destination ring of the ntuple filter must be
a valid ring in the RSS indirection table. Ntuple filters may not work
if the RSS indirection table is modified by the user to only contain a
subset of the rings. If an ntuple filter is set to a ring destination
that is not in the RSS indirection table, the packet matching that
filter will be placed in a random ring instead of the specified
destination ring.
This series of patches will fix the problem by using a separate VNIC
for ntuple filters. The default VNIC will be dedicated for RSS and
so the indirection table can be setup in any way and will not affect
ntuple filters using the separate VNIC.
Quite a bit of refactoring is needed to do the the VNIC and RSS
context accounting in the first few patches. This is technically a
bug fix, but I think the changes are too big for -net.
====================
Link: https://lore.kernel.org/r/20240220230317.96341-1-michael.chan@broadcom.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The newly created vnic (BNXT_VNIC_NTUPLE) is ready to be used to create
ntuple filters when supported by firmware. All RX rings can be used
regardless of the RSS indirection setting on the default VNIC.
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Allocate and setup the additional VNIC for ntuple filters if this
new method is supported by the firmware. Even though this VNIC is
only used for ntuple filters with direct ring destinations, we still
setup the RSS hash to be identical to the default VNIC so that each
RX packet will have the correct hash in the RX completion. This
VNIC is always at VNIC index BNXT_VNIC_NTUPLE.
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
On newer chips that support the ring table index method for
ntuple filters, the current scheme of using the same VNIC for
both RSS and ntuple filters will not work in all cases. An
ntuple filter can only be directed to a destination ring if
that destination ring is also in the RSS indirection table.
To support ntuple filters with any arbitratry RSS indirection
table that may only include a subset of the rings, we need to
use a separate VNIC for ntuple filters.
This patch provisions the additional VNIC. The next patch will
allocate additional VNIC from firmware and set it up.
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Replace hard coded 0 index with more meaningful BNXT_VNIC_DEFAULT.
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Refactor bnxt_set_features() function to have a common
function to re-init. We'll need this to reinitialize when
ntuple configuration changes.
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
