Andrea Mayer says:
====================
seg6: add support for SRv6 Headend Reduced
This patchset adds support for SRv6 Headend behavior with Reduced
Encapsulation. It introduces the H.Encaps.Red and H.L2Encaps.Red versions
of the SRv6 H.Encaps and H.L2Encaps behaviors, according to RFC 8986 [1].
In details, the patchset is made of:
- patch 1/4: add support for SRv6 H.Encaps.Red behavior;
- Patch 2/4: add support for SRv6 H.L2Encaps.Red behavior;
- patch 2/4: add selftest for SRv6 H.Encaps.Red behavior;
- patch 3/4: add selftest for SRv6 H.L2Encaps.Red behavior.
The corresponding iproute2 patch for supporting SRv6 H.Encaps.Red and
H.L2Encaps.Red behaviors is provided in a separated patchset.
[1] - https://datatracker.ietf.org/doc/html/rfc8986
V4 -> v5:
- Fix skb checksum for SRH Reduced encapsulation/insertion;
- Improve selftests by:
i) adding a random suffix to network namespaces;
ii) creating net devices directly into network namespaces;
iii) using trap EXIT command to properly clean up selftest networks.
Thanks to Paolo Abeni.
v3 -> v4:
- Add selftests to the Makefile, thanks to Jakub Kicinski.
v2 -> v3:
- Keep SRH when HMAC TLV is present;
- Split the support for H.Encaps.Red and H.L2Encaps.Red behaviors in two
patches (respectively, patch 1/4 and patch 2/4);
- Add selftests for SRv6 H.Encaps.Red and H.L2Encaps.Red.
v1 -> v2:
- Fixed sparse warnings;
- memset now uses sizeof() instead of hardcoded value;
- Removed EXPORT_SYMBOL_GPL.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This selftest is designed for testing the H.L2Encaps.Red behavior. It
instantiates a virtual network composed of several nodes: hosts and SRv6
routers. Each node is realized using a network namespace that is
properly interconnected to others through veth pairs.
The test considers SRv6 routers implementing a L2 VPN leveraged by hosts
for communicating with each other. Such routers make use of the SRv6
H.L2Encaps.Red behavior for applying SRv6 policies to L2 traffic coming
from hosts.
The correct execution of the behavior is verified through reachability
tests carried out between hosts belonging to the same VPN.
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Signed-off-by: David S. Miller <davem@davemloft.net>
This selftest is designed for testing the H.Encaps.Red behavior. It
instantiates a virtual network composed of several nodes: hosts and SRv6
routers. Each node is realized using a network namespace that is
properly interconnected to others through veth pairs.
The test considers SRv6 routers implementing L3 VPNs leveraged by hosts
for communicating with each other. Such routers make use of the SRv6
H.Encaps.Red behavior for applying SRv6 policies to L3 traffic coming
from hosts.
The correct execution of the behavior is verified through reachability
tests carried out between hosts belonging to the same VPN.
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Signed-off-by: David S. Miller <davem@davemloft.net>
The SRv6 H.L2Encaps.Red behavior described in [1] is an optimization of
the SRv6 H.L2Encaps behavior [2].
H.L2Encaps.Red reduces the length of the SRH by excluding the first
segment (SID) in the SRH of the pushed IPv6 header. The first SID is
only placed in the IPv6 Destination Address field of the pushed IPv6
header.
When the SRv6 Policy only contains one SID the SRH is omitted, unless
there is an HMAC TLV to be carried.
[1] - https://datatracker.ietf.org/doc/html/rfc8986#section-5.4
[2] - https://datatracker.ietf.org/doc/html/rfc8986#section-5.3
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Signed-off-by: Anton Makarov <anton.makarov11235@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The SRv6 H.Encaps.Red behavior described in [1] is an optimization of
the SRv6 H.Encaps behavior [2].
H.Encaps.Red reduces the length of the SRH by excluding the first
segment (SID) in the SRH of the pushed IPv6 header. The first SID is
only placed in the IPv6 Destination Address field of the pushed IPv6
header.
When the SRv6 Policy only contains one SID the SRH is omitted, unless
there is an HMAC TLV to be carried.
[1] - https://datatracker.ietf.org/doc/html/rfc8986#section-5.2
[2] - https://datatracker.ietf.org/doc/html/rfc8986#section-5.1
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Signed-off-by: Anton Makarov <anton.makarov11235@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit '2c5a5748105a ("vmxnet3: add support for out of order rx
completion")' added support for out of order rx completion. Within
that patch, an enhancement was done to reschedule napi for processing
rx completions.
However, it can lead to missing an interrupt. So, this patch reverts
that part of the code.
Fixes: 2c5a574810 ("vmxnet3: add support for out of order rx completion")
Signed-off-by: Ronak Doshi <doshir@vmware.com>
Acked-by: Guolin Yang <gyang@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The tcp_reflect_tos option was introduced in Linux 5.10 but was still
undocumented.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
User can use AF_PACKET socket to send packets with the length of 0.
When min_header_len equals to 0, packet_snd will call __dev_queue_xmit
to send packets, and sock->type can be any type.
Reported-by: syzbot+5ea725c25d06fb9114c4@syzkaller.appspotmail.com
Fixes: fd18942244 ("bpf: Don't redirect packets with invalid pkt_len")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel says:
====================
mlxsw: Add PTP support for Spectrum-2 and newer ASICs
This patchset adds PTP support for Spectrum-{2,3,4} switch ASICs. They
all act largely the same with respect to PTP except for a workaround
implemented for Spectrum-{2,3} in patch #6.
Spectrum-2 and newer ASICs essentially implement a transparent clock
between all the switch ports, including the CPU port. The hardware will
generate the UTC time stamp for transmitted / received packets at the
CPU port, but will compensate for forwarding delays in the ASIC by
adjusting the correction field in the PTP header (for PTP events) at the
ingress and egress ports.
Specifically, the hardware will subtract the current time stamp from the
correction field at the ingress port and will add the current time stamp
to the correction field at the egress port. For the purpose of an
ordinary or boundary clock (this patchset), the correction field will
always be adjusted between the CPU port and one of the front panel
ports, but never between two front panel ports.
Patchset overview:
Patch #1 extracts a helper to configure traps for PTP packets (event and
general messages). The helper is shared between all Spectrum
generations.
Patch #2 transitions Spectrum-2 and newer ASICs to use a different
format of Tx completions that includes the UTC time stamp of transmitted
packets.
Patch #3 adds basic initialization required for Spectrum-2 PTP support.
It mainly invokes the helper from patch #1.
Patch #4 adds helpers to read the UTC time (seconds and nanoseconds)
from the device over memory-mapped I/O instead of going through firmware
which is slower and therefore inaccurate. The helpers will be used to
implement various PHC operations (e.g., gettimex64) and to construct the
full UTC time stamp from the truncated one reported over Tx / Rx
completions.
Patch #5 implements the various PHC operations.
Patch #6 implements the previously described workaround for
Spectrum-{2,3}.
Patch #7 adds the ability to report a hardware time stamp for a received
/ transmitted packet based off the associated Rx / Tx completion that
includes a truncated UTC time stamp.
Patches #8 and #9 implement support for the SIOCGHWTSTAMP /
SIOCSHWTSTAMP ioctls and the get_ts_info ethtool callback, respectively.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The 'get_ts_info' callback is used for obtaining information about
time stamping and PTP hardware clock capabilities of a network device.
The existing function of Spectrum-1 is used to advertise the PHC
capabilities and the supported RX and TX filters. Implement a similar
function for Spectrum-2, expose that the supported 'rx_filters' are all
PTP event packets, as for these packets the driver fills the time stamp
from the CQE in the SKB.
In the future, mlxsw driver will be extended to support one-step PTP in
Spectrum-2 and newer ASICs. Then additional 'tx_types' will be supported.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The SIOCSHWTSTAMP ioctl configures HW timestamping on a given port. In
Spectrum-2 and above, each packet gets time stamp by default, but in
order to provide an accurate time stamp, software should configure to
update the correction field. In addition, the PTP traps are not enabled
by default, software should enable it per port or for all ports.
The switch behaves like a transparent clock between CPU port and each
front panel port. If ingress correction is set on a port for a given packet
type, then when such a packet is received via the port, the current time
stamp is subtracted from the correction field. If egress correction is set
on a port for a given packet type, then when such a packet is transmitted
via the port, the current time stamp is added to the correction field.
The result is that as the packet ingresses through a port with ingress
correction enabled, and egresses through a port with egress correction
enabled, the PTP correction field is updated to reflect the time that the
packet spent in the ASIC.
This can be used to update the correction field of trapped packets by
enabling ingress correction on a port where time stamping was enabled,
and egress correction on the CPU port. Similarly, for packets transmitted
from the host, ingress correction should be enabled on the CPU port, and
egress correction on a front-panel port.
However, since the correction fields will be updated for all PTP packets
crossing the CPU port, in order not to mangle the correction field, the
front panel port involved in the packet transfer must have the
corresponding correction enabled as well.
Therefore, when HW timestamping is enabled on at least one port, we have
to configure hardware to update the correction field and trap PTP event
packets on all ports.
Add reference count as part of 'struct mlxsw_sp_ptp_state', to maintain
how many ports use HW timestamping. Handle the correction field
configuration only when the first port enables time stamping and when the
last port disables time stamping. Store the configuration as part of
'struct mlxsw_sp_ptp_state', as it is global for all ports.
The SIOCGHWTSTAMP ioctl is a getter for the current configuration,
implement it and use the global configuration.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As opposed to Spectrum-1, in which time stamps arrive through a pair of
dedicated events into a queue and later are being matched to the
corresponding packets, in Spectrum-2 we are reading the time stamps
directly from the CQE. Software can get the time stamp in UTC format
using CQEv2.
Add a time stamp field to 'struct mlxsw_skb_cb'. In
mlxsw_pci_cqe_{rdq,sdq}_handle() extract the time stamp from the CQE into
the new time stamp field. Note that the time stamp in the CQE is
represented by 38 bits, which is a short representation of UTC time.
Software should create the full time stamp using the global UTC clock.
Read UTC clock from hardware only for PTP packets which were trapped to CPU
with PTP0 trap ID (event packets).
Use the time stamp from the SKB when packet is received or transmitted.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In Spectrum-2 and Spectrum-3, the correction field of PTP packets which are
sent as control packets is not updated at egress port. To overcome this
limitation, PTP packets which require time stamp, should be sent as data
packets with the following details:
1. FID valid = 1
2. FID value above the maximum FID
3. rx_router_port = 1
>From Spectrum-4 and on, this limitation will be solved.
Extend the function which handles TX header, in case that the packet is
a PTP packet, add TX header with type=data and all the above mentioned
requirements. Add operation as part of 'struct mlxsw_sp_ptp_ops', to be
able to separate the handling of PTP packets between different ASICs. Use
the data packet solution only for Spectrum-2 and Spectrum-3. Therefore, add
a dedicated operation structure for Spectrum-4, as it will be same to
Spectrum-2 in PTP implementation, just will not have the limitation of
control packets.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement physical hardware clock operations. The main difference between
the existing operations of Spectrum-1 and the new operations of Spectrum-2
is the usage of UTC hardware clock instead of FRC.
Add support for init() and fini() functions for PTP clock in Spectrum-2.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Query UTC sec and nsec PCI offsets during the pci_init(), to be able to
read UTC time later.
Implement functions to read UTC seconds and nanoseconds from the offset
which was read as part of initialization.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Lay the groundwork for Spectrum-2 support. On Spectrum-2, the packets get
the time stamps from the CQE, which means that the time stamp is attached
to its packet.
Configure MTPTPT to set which message types should arrive under which
PTP trap. PTP0 will be used for event message types, which means that
the packets require time stamp. PTP1 will be used for other packets.
Note that in Spectrum-2, all packets contain time stamp by default. The two
types of traps (PTP0, PTP1) will be used to separate between PTP_EVENT
traps and PTP_GENERAL traps, so then the driver will fill the time stamp as
part of the SKB only for event message types.
Later the driver will enable the traps using 'MTPCPC.ptp_trap_en' bit.
Then, PTP packets start arriving through the PTP traps.
Currently, the structure 'mlxsw_sp2_ptp_state' contains only the common
structure, the next patches will extend it.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, Tx completions are reported using Completion Queue Element
version 1 (CQEv1). These elements do not contain the Tx time stamp,
which is fine as Spectrum-1 reads Tx time stamps via a dedicated FIFO
and Spectrum-2 does not currently support PTP.
In preparation for Spectrum-2 PTP support, use CQEv2 for Spectrum-2 and
newer ASICs, as this CQE format encodes the Tx time stamp.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
MTPTPT register is used to set which message types should arrive under
which PTP trap. Currently, PTP0 is used for event message types, which
means that the packets require time stamp. PTP1 is used for other packets.
This configuration will be same for Spectrum-2 and newer ASICs. In
preparation for Spectrum-2 PTP support, add helper functions to
configure PTP traps and use them for Spectrum-1. These functions will be
used later also for Spectrum-2.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Aside of urb->transfer_buffer_length and urb->context which might
change in the TX path, all the other URB parameters remains constant
during runtime. So, there is no reasons to call usb_fill_bulk_urb()
each time before submitting an URB.
Make sure to initialize all the fields of the URB at allocation
time. For the TX branch, replace the call usb_fill_bulk_urb() by an
assignment of urb->context. urb->urb->transfer_buffer_length is
already set by the caller functions, no need to set it again. For the
RX branch, because all parameters are unchanged, simply remove the
call to usb_fill_bulk_urb().
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20220729080902.25839-1-mailhol.vincent@wanadoo.fr
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Instead of listing directly properties typical for SPI peripherals,
reference the spi-peripheral-props.yaml schema. This allows using all
properties typical for SPI-connected devices, even these which device
bindings author did not tried yet.
Remove the spi-* properties which now come via spi-peripheral-props.yaml
schema, except for the cases when device schema adds some constraints
like maximum frequency.
While changing additionalProperties->unevaluatedProperties, put it in
typical place, just before example DTS.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220727164130.385411-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Christian Marangi says:
====================
net: dsa: qca8k: code split for qca8k
This is needed ad ipq4019 SoC have an internal switch that is
based on qca8k with very minor changes. The general function is equal.
Because of this we split the driver to common and specific code.
As the common function needs to be moved to a different file to be
reused, we had to convert every remaining user of qca8k_read/write/rmw
to regmap variant.
We had also to generilized the special handling for the ethtool_stats
function that makes use of the autocast mib. (ipq4019 will have a
different tagger and use mmio so it could be quicker to use mmio instead
of automib feature)
And we had to convert the regmap read/write to bulk implementation to
drop the special function that makes use of it. This will be compatible
with ipq4019 and at the same time permits normal switch to use the eth
mgmt way to send the entire ATU table read/write in one go.
====================
Link: https://lore.kernel.org/r/20220727113523.19742-1-ansuelsmth@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The same function to read the switch id is used by drivers based on
qca8k family switch. Move them to common code to make them accessible
also by other drivers.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The same port LAG functions are used by drivers based on qca8k family
switch. Move them to common code to make them accessible also by other
drivers.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The same port VLAN functions are used by drivers based on qca8k family
switch. Move them to common code to make them accessible also by other
drivers.
Also drop exposing busy_wait and make it static.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The same port mirror functions are used by drivers based on qca8k family
switch. Move them to common code to make them accessible also by other
drivers.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The same port FDB/MDB function are used by drivers based on qca8k family
switch. Move them to common code to make them accessible also by other
drivers.
Also drop bulk read/write functions and make them static
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The same set age, MTU and port enable/disable function are used by
driver based on qca8k family switch.
Move them to common code to make them accessible also by other drivers.
While at it also drop unnecessary qca8k_priv cast for void pointers.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The same bridge functions are used by drivers based on qca8k family
switch. Move them to common code to make them accessible also by other
drivers.
While at it also drop unnecessary qca8k_priv cast for void pointers.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The same logic to disable/enable port, set eee and get ethtool stats is
used by drivers based on qca8k family switch.
Move it to common code to make it accessible also by other drivers.
While at it also drop unnecessary qca8k_priv cast for void pointers.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The same mib function is used by drivers based on qca8k family switch.
Move it to common code to make it accessible also by other drivers.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The same ATU function are used by drivers based on qca8k family switch.
Move the bulk read/write helper to common code to declare these shared
ATU functions in common code.
These helper will be dropped when regmap correctly support bulk
read/write.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The same reg table and read/write/rmw function are used by drivers
based on qca8k family switch.
Move them to common code to make it accessible also by other drivers.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The same MIB struct is used by drivers based on qca8k family switch. Move
it to common code to make it accessible also by other drivers.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some switch may not support mib autocast feature and require the legacy
way of reading the regs directly.
Make the mib autocast feature optional and permit to declare support for
it using match_data struct in a dedicated qca8k_info_ops struct.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Using of_device_get_match_data is expensive. Cache match data to speed
up access and rework user of match data to use the new cached value.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix following includecheck warning:
./drivers/net/ethernet/mellanox/mlxsw/core_linecard_dev.c: linux/err.h is included more than once.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20220727233801.23781-1-yang.lee@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a Makefile which takes care of installing the selftests in
tools/testing/selftests/drivers/net/dsa. This can be used to install all
DSA specific selftests and forwarding.config using the same approach as
for the selftests in tools/testing/selftests/net/forwarding.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20220727191642.480279-1-martin.blumenstingl@googlemail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Moshe Shemesh says:
====================
Take devlink lock on mlx4 and mlx5 callbacks
Prepare mlx4 and mlx5 drivers to have all devlink callbacks called with
devlink instance locked. Change mlx4 driver to use devl_ API where
needed to have devlink reload callbacks locked. Change mlx5 driver to
use devl_ API where needed to have devlink reload and devlink health
callbacks locked.
As mlx5 is the only driver which needed changes to enable calling health
callbacks with devlink instance locked, this patchset also removes
DEVLINK_NL_FLAG_NO_LOCK flag from devlink health callbacks.
This patchset will be followed by a patchset that will remove
DEVLINK_NL_FLAG_NO_LOCK flag from devlink and will remove devlink_mutex.
====================
Link: https://lore.kernel.org/r/1659023630-32006-1-git-send-email-moshe@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Let the core take the devlink instance lock around health callbacks and
remove the now redundant locking in the drivers.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Change devlink instance locks in mlx5 driver to have devlink health
recovery callback locked, while keeping all driver paths which lead to
devl_ API functions called by the driver locked.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Change devlink instance locks in mlx4 driver to have devlink reload
callback locked, while keeping all driver paths which leads to devl_ API
functions called by the mlx4 driver locked.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use devl_ API to call devl_port_register() and devl_port_unregister()
instead of devlink_port_register() and devlink_port_unregister(). Add
devlink instance lock in mlx4 driver paths to these functions.
This will be used by the downstream patch to invoke mlx4 devlink reload
callbacks with devlink lock held.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use devl_ API to call devl_region_create() and devl_region_destroy()
instead of devlink_region_create() and devlink_region_destroy().
Add devlink instance lock in mlx4 driver paths to these functions.
This will be used by the downstream patch to invoke mlx4 devlink reload
callbacks with devlink lock held.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Change devlink instance locks in mlx5 driver to have devlink reload
callbacks locked, while keeping all driver paths which lead to devl_ API
functions called by the driver locked.
Add mlx5_load_one_devl_locked() and mlx5_unload_one_devl_locked() which
are used by the paths which are already locked such as devlink reload
callbacks.
This patch makes the driver use devl_ API also for traps register as
these functions are called from the driver paths parallel to reload that
requires locking now.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Refactor fw reset code to have the unload driver part done on
mlx5_fw_reset_complete_reload(), so if it was called by the PF which
initiated the reload fw activate flow, the unload part will be handled
by the mlx5_devlink_reload_fw_activate() callback itself and not by the
reset event work.
This will be used by the downstream patch to invoke devlink reload
callbacks with devlink lock held.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After mlx4 driver is converted to do locked reload,
devlink_region_snapshot_create() may be called from both locked and
unlocked context.
Note that in mlx4 region snapshots could be created on any command
failure. That can happen in any flow that involves commands to FW,
which means most of the driver flows.
So resolve this by removing dependency on devlink->lock for region
snapshots list consistency and introduce new mutex to ensure it.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After mlx4 driver is converted to do locked reload, functions to get/put
regions snapshot ID may be called from both locked and unlocked context.
So resolve this by removing dependency on devlink->lock for region
snapshot ID tracking by using internal xa_lock() to maintain
shapshot_ids xa_array consistency.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vikas Gupta says:
====================
add framework for selftests in devlink
Add support for selftests in the devlink framework.
Adds a callback .selftests_check and .selftests_run in devlink_ops.
User can add test(s) suite which is subsequently passed to the driver
and driver can opt for running particular tests based on its capabilities.
Patchset adds a flash based test for the bnxt_en driver.
====================
Link: https://lore.kernel.org/r/20220727165721.37959-1-vikas.gupta@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
