Commit graph

494 commits

Author SHA1 Message Date
Samuel Holland
6f9dc684ca scs: add CONFIG_MMU dependency for vfree_atomic()
The shadow call stack implementation fails to build without CONFIG_MMU:

  ld.lld: error: undefined symbol: vfree_atomic
  >>> referenced by scs.c
  >>>               kernel/scs.o:(scs_free) in archive vmlinux.a

Link: https://lkml.kernel.org/r/20240122175204.2371009-1-samuel.holland@sifive.com
Fixes: a2abe7cbd8 ("scs: switch to vmapped shadow stacks")
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Cc: Will Deacon <will@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-01-25 23:52:21 -08:00
Linus Torvalds
0dde2bf67b IOMMU Updates for Linux v6.8
Including:
 
 	- Core changes:
 	  - Fix race conditions in device probe path
 	  - Retire IOMMU bus_ops
 	  - Support for passing custom allocators to page table drivers
 	  - Clean up Kconfig around IOMMU_SVA
 	  - Support for sharing SVA domains with all devices bound to
 	    a mm
 	  - Firmware data parsing cleanup
 	  - Tracing improvements for iommu-dma code
 	  - Some smaller fixes and cleanups
 
 	- ARM-SMMU drivers:
 	  - Device-tree binding updates:
 	     - Add additional compatible strings for Qualcomm SoCs
 	     - Document Adreno clocks for Qualcomm's SM8350 SoC
 	  - SMMUv2:
 	    - Implement support for the ->domain_alloc_paging() callback
 	    - Ensure Secure context is restored following suspend of Qualcomm SMMU
 	      implementation
 	  - SMMUv3:
 	    - Disable stalling mode for the "quiet" context descriptor
 	    - Minor refactoring and driver cleanups
 
 	 - Intel VT-d driver:
 	   - Cleanup and refactoring
 
 	 - AMD IOMMU driver:
 	   - Improve IO TLB invalidation logic
 	   - Small cleanups and improvements
 
 	 - Rockchip IOMMU driver:
 	   - DT binding update to add Rockchip RK3588
 
 	 - Apple DART driver:
 	   - Apple M1 USB4/Thunderbolt DART support
 	   - Cleanups
 
 	 - Virtio IOMMU driver:
 	   - Add support for iotlb_sync_map
 	   - Enable deferred IO TLB flushes
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEr9jSbILcajRFYWYyK/BELZcBGuMFAmWecQoACgkQK/BELZcB
 GuN5ZxAAzC5QUKAzANx0puk7QhPpKKlbSvj6Q7iRgCLk00KJO1+VQh9v4ouCmXqF
 kn3Ko8gddjhtrgwN0OQ54F39cLUrp1SBemy71K5YOR+vu8VKtwtmawZGeeRZ+k+B
 Eohw58oaXTiR1maYvoLixLYczLrjklqyJOQ1vZ0GxFGxDqrFByAryHDgG/3OCpJx
 C9e6PsLbbfhfqA8Kv97iKcBqniGbXxAMuodqSUG0buQ3oZgfpIP6Bt3EgUzFGPGk
 3BTlYxowS/gkjUWd3fgjQFIFLTA01u9FhpA2Jb0a4v67pUCR64YxHN7rBQ6ZChtG
 kB9laQfU9re79RsHhqQzr0JT9x/eyq7pzGzjp5TV5TPW6IW+sqjMIPhzd9P08Ef7
 BclkCVobx0jSAHOhnnG4QJiKANr2Y2oM3HfsAJccMMY45RRhUKmVqM7jxMPfGn3A
 i+inlee73xTjZXJse1EWG1fmKKMLvX9LDEp4DyOfn9CqVT+7hpZvzPjfbGr937Rm
 JlwXhF3rQXEpOCagEsbt1vOf+V0e9QiCLf1Y2KpkIkDbE5wwSD/2qLm3tFhJG3oF
 fkW+J14Cid0pj+hY0afGe0kOUOIYlimu0nFmSf0pzMH+UktZdKogSfyb1gSDsy+S
 rsZRGPFhMJ832ExqhlDfxqBebqh+jsfKynlskui6Td5C9ZULaHA=
 =q751
 -----END PGP SIGNATURE-----

Merge tag 'iommu-updates-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu

Pull iommu updates from Joerg Roedel:
 "Core changes:
   - Fix race conditions in device probe path
   - Retire IOMMU bus_ops
   - Support for passing custom allocators to page table drivers
   - Clean up Kconfig around IOMMU_SVA
   - Support for sharing SVA domains with all devices bound to a mm
   - Firmware data parsing cleanup
   - Tracing improvements for iommu-dma code
   - Some smaller fixes and cleanups

  ARM-SMMU drivers:
   - Device-tree binding updates:
      - Add additional compatible strings for Qualcomm SoCs
      - Document Adreno clocks for Qualcomm's SM8350 SoC
   - SMMUv2:
      - Implement support for the ->domain_alloc_paging() callback
      - Ensure Secure context is restored following suspend of Qualcomm
        SMMU implementation
   - SMMUv3:
      - Disable stalling mode for the "quiet" context descriptor
      - Minor refactoring and driver cleanups

  Intel VT-d driver:
   - Cleanup and refactoring

  AMD IOMMU driver:
   - Improve IO TLB invalidation logic
   - Small cleanups and improvements

  Rockchip IOMMU driver:
   - DT binding update to add Rockchip RK3588

  Apple DART driver:
   - Apple M1 USB4/Thunderbolt DART support
   - Cleanups

  Virtio IOMMU driver:
   - Add support for iotlb_sync_map
   - Enable deferred IO TLB flushes"

* tag 'iommu-updates-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (66 commits)
  iommu: Don't reserve 0-length IOVA region
  iommu/vt-d: Move inline helpers to header files
  iommu/vt-d: Remove unused vcmd interfaces
  iommu/vt-d: Remove unused parameter of intel_pasid_setup_pass_through()
  iommu/vt-d: Refactor device_to_iommu() to retrieve iommu directly
  iommu/sva: Fix memory leak in iommu_sva_bind_device()
  dt-bindings: iommu: rockchip: Add Rockchip RK3588
  iommu/dma: Trace bounce buffer usage when mapping buffers
  iommu/arm-smmu: Convert to domain_alloc_paging()
  iommu/arm-smmu: Pass arm_smmu_domain to internal functions
  iommu/arm-smmu: Implement IOMMU_DOMAIN_BLOCKED
  iommu/arm-smmu: Convert to a global static identity domain
  iommu/arm-smmu: Reorganize arm_smmu_domain_add_master()
  iommu/arm-smmu-v3: Remove ARM_SMMU_DOMAIN_NESTED
  iommu/arm-smmu-v3: Master cannot be NULL in arm_smmu_write_strtab_ent()
  iommu/arm-smmu-v3: Add a type for the STE
  iommu/arm-smmu-v3: disable stall for quiet_cd
  iommu/qcom: restore IOMMU state if needed
  iommu/arm-smmu-qcom: Add QCM2290 MDSS compatible
  iommu/arm-smmu-qcom: Add missing GMU entry to match table
  ...
2024-01-18 15:16:57 -08:00
Linus Torvalds
9f2a635235 Quite a lot of kexec work this time around. Many singleton patches in
many places.  The notable patch series are:
 
 - nilfs2 folio conversion from Matthew Wilcox in "nilfs2: Folio
   conversions for file paths".
 
 - Additional nilfs2 folio conversion from Ryusuke Konishi in "nilfs2:
   Folio conversions for directory paths".
 
 - IA64 remnant removal in Heiko Carstens's "Remove unused code after
   IA-64 removal".
 
 - Arnd Bergmann has enabled the -Wmissing-prototypes warning everywhere
   in "Treewide: enable -Wmissing-prototypes".  This had some followup
   fixes:
 
   - Nathan Chancellor has cleaned up the hexagon build in the series
     "hexagon: Fix up instances of -Wmissing-prototypes".
 
   - Nathan also addressed some s390 warnings in "s390: A couple of
     fixes for -Wmissing-prototypes".
 
   - Arnd Bergmann addresses the same warnings for MIPS in his series
     "mips: address -Wmissing-prototypes warnings".
 
 - Baoquan He has made kexec_file operate in a top-down-fitting manner
   similar to kexec_load in the series "kexec_file: Load kernel at top of
   system RAM if required"
 
 - Baoquan He has also added the self-explanatory "kexec_file: print out
   debugging message if required".
 
 - Some checkstack maintenance work from Tiezhu Yang in the series
   "Modify some code about checkstack".
 
 - Douglas Anderson has disentangled the watchdog code's logging when
   multiple reports are occurring simultaneously.  The series is "watchdog:
   Better handling of concurrent lockups".
 
 - Yuntao Wang has contributed some maintenance work on the crash code in
   "crash: Some cleanups and fixes".
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZZ2R6AAKCRDdBJ7gKXxA
 juCVAP4t76qUISDOSKugB/Dn5E4Nt9wvPY9PcufnmD+xoPsgkQD+JVl4+jd9+gAV
 vl6wkJDiJO5JZ3FVtBtC3DFA/xHtVgk=
 =kQw+
 -----END PGP SIGNATURE-----

Merge tag 'mm-nonmm-stable-2024-01-09-10-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull non-MM updates from Andrew Morton:
 "Quite a lot of kexec work this time around. Many singleton patches in
  many places. The notable patch series are:

   - nilfs2 folio conversion from Matthew Wilcox in 'nilfs2: Folio
     conversions for file paths'.

   - Additional nilfs2 folio conversion from Ryusuke Konishi in 'nilfs2:
     Folio conversions for directory paths'.

   - IA64 remnant removal in Heiko Carstens's 'Remove unused code after
     IA-64 removal'.

   - Arnd Bergmann has enabled the -Wmissing-prototypes warning
     everywhere in 'Treewide: enable -Wmissing-prototypes'. This had
     some followup fixes:

      - Nathan Chancellor has cleaned up the hexagon build in the series
        'hexagon: Fix up instances of -Wmissing-prototypes'.

      - Nathan also addressed some s390 warnings in 's390: A couple of
        fixes for -Wmissing-prototypes'.

      - Arnd Bergmann addresses the same warnings for MIPS in his series
        'mips: address -Wmissing-prototypes warnings'.

   - Baoquan He has made kexec_file operate in a top-down-fitting manner
     similar to kexec_load in the series 'kexec_file: Load kernel at top
     of system RAM if required'

   - Baoquan He has also added the self-explanatory 'kexec_file: print
     out debugging message if required'.

   - Some checkstack maintenance work from Tiezhu Yang in the series
     'Modify some code about checkstack'.

   - Douglas Anderson has disentangled the watchdog code's logging when
     multiple reports are occurring simultaneously. The series is
     'watchdog: Better handling of concurrent lockups'.

   - Yuntao Wang has contributed some maintenance work on the crash code
     in 'crash: Some cleanups and fixes'"

* tag 'mm-nonmm-stable-2024-01-09-10-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (157 commits)
  crash_core: fix and simplify the logic of crash_exclude_mem_range()
  x86/crash: use SZ_1M macro instead of hardcoded value
  x86/crash: remove the unused image parameter from prepare_elf_headers()
  kdump: remove redundant DEFAULT_CRASH_KERNEL_LOW_SIZE
  scripts/decode_stacktrace.sh: strip unexpected CR from lines
  watchdog: if panicking and we dumped everything, don't re-enable dumping
  watchdog/hardlockup: use printk_cpu_sync_get_irqsave() to serialize reporting
  watchdog/softlockup: use printk_cpu_sync_get_irqsave() to serialize reporting
  watchdog/hardlockup: adopt softlockup logic avoiding double-dumps
  kexec_core: fix the assignment to kimage->control_page
  x86/kexec: fix incorrect end address passed to kernel_ident_mapping_init()
  lib/trace_readwrite.c:: replace asm-generic/io with linux/io
  nilfs2: cpfile: fix some kernel-doc warnings
  stacktrace: fix kernel-doc typo
  scripts/checkstack.pl: fix no space expression between sp and offset
  x86/kexec: fix incorrect argument passed to kexec_dprintk()
  x86/kexec: use pr_err() instead of kexec_dprintk() when an error occurs
  nilfs2: add missing set_freezable() for freezable kthread
  kernel: relay: remove relay_file_splice_read dead code, doesn't work
  docs: submit-checklist: remove all of "make namespacecheck"
  ...
2024-01-09 11:46:20 -08:00
Kinsey Ho
71ce1ab54a mm/mglru: add CONFIG_ARCH_HAS_HW_PTE_YOUNG
Patch series "mm/mglru: Kconfig cleanup", v4.

This series is the result of the following discussion:
https://lore.kernel.org/47066176-bd93-55dd-c2fa-002299d9e034@linux.ibm.com/

It mainly avoids building the code that walks page tables on CPUs that
use it, i.e., those don't support hardware accessed bit. Specifically,
it introduces a new Kconfig to guard some of functions added by
commit bd74fdaea1 ("mm: multi-gen LRU: support page table walks")
on CPUs like POWER9, on which the series was tested.


This patch (of 5):

Some architectures are able to set the accessed bit in PTEs when PTEs
are used as part of linear address translations.

Add CONFIG_ARCH_HAS_HW_PTE_YOUNG for such architectures to be able to
override arch_has_hw_pte_young().

Link: https://lkml.kernel.org/r/20231227141205.2200125-1-kinseyho@google.com
Link: https://lkml.kernel.org/r/20231227141205.2200125-2-kinseyho@google.com
Signed-off-by: Kinsey Ho <kinseyho@google.com>
Co-developed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Tested-by: Donet Tom <donettom@linux.vnet.ibm.com>
Acked-by: Yu Zhao <yuzhao@google.com>
Cc: kernel test robot <lkp@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-01-05 10:17:44 -08:00
Jason Gunthorpe
8f23f5dba6 iommu: Change kconfig around IOMMU_SVA
Linus suggested that the kconfig here is confusing:

https://lore.kernel.org/all/CAHk-=wgUiAtiszwseM1p2fCJ+sC4XWQ+YN4TanFhUgvUqjr9Xw@mail.gmail.com/

Let's break it into three kconfigs controlling distinct things:

 - CONFIG_IOMMU_MM_DATA controls if the mm_struct has the additional
   fields for the IOMMU. Currently only PASID, but later patches store
   a struct iommu_mm_data *

 - CONFIG_ARCH_HAS_CPU_PASID controls if the arch needs the scheduling bit
   for keeping track of the ENQCMD instruction. x86 will select this if
   IOMMU_SVA is enabled

 - IOMMU_SVA controls if the IOMMU core compiles in the SVA support code
   for iommu driver use and the IOMMU exported API

This way ARM will not enable CONFIG_ARCH_HAS_CPU_PASID

Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20231027000525.1278806-2-tina.zhang@intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2023-12-12 10:11:27 +01:00
Heiko Carstens
0eb5085c38 arch: remove ARCH_TASK_STRUCT_ON_STACK
IA-64 was the only architecture which selected ARCH_TASK_STRUCT_ON_STACK.
IA-64 was removed with commit cf8e865810 ("arch: Remove Itanium (IA-64)
architecture"). Therefore remove support for ARCH_TASK_STRUCT_ON_STACK
as well.

Note: this also reveals a potential bug in powerpc code, which makes use of
__init_task_data without selecting ARCH_TASK_STRUCT_ON_STACK which makes
__init_task_data a no-op. This is broken since commit d11ed3ab31 ("Expand
INIT_TASK() in init/init_task.c and remove") from 2018 and needs to be
addressed separately.

Link: https://lkml.kernel.org/r/20231116133638.1636277-4-hca@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-10 17:21:31 -08:00
Heiko Carstens
3888750e21 arch: remove ARCH_TASK_STRUCT_ALLOCATOR
IA-64 was the only architecture which selected ARCH_TASK_STRUCT_ALLOCATOR.
IA-64 was removed with commit cf8e865810 ("arch: Remove Itanium (IA-64)
architecture"). Therefore remove support for ARCH_THREAD_STACK_ALLOCATOR
as well.

Link: https://lkml.kernel.org/r/20231116133638.1636277-3-hca@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-10 17:21:31 -08:00
Heiko Carstens
f72709ab69 arch: remove ARCH_THREAD_STACK_ALLOCATOR
Patch series "Remove unused code after IA-64 removal".

While looking into something different I noticed that there are a couple
of Kconfig options which were only selected by IA-64 and which are now
unused.

So remove them and simplify the code a bit.


This patch (of 3):

IA-64 was the only architecture which selected ARCH_THREAD_STACK_ALLOCATOR.
IA-64 was removed with commit cf8e865810 ("arch: Remove Itanium (IA-64)
architecture"). Therefore remove support for ARCH_THREAD_STACK_ALLOCATOR as
well.

Link: https://lkml.kernel.org/r/20231116133638.1636277-1-hca@linux.ibm.com
Link: https://lkml.kernel.org/r/20231116133638.1636277-2-hca@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-10 17:21:30 -08:00
Ard Biesheuvel
cf8e865810 arch: Remove Itanium (IA-64) architecture
The Itanium architecture is obsolete, and an informal survey [0] reveals
that any residual use of Itanium hardware in production is mostly HP-UX
or OpenVMS based. The use of Linux on Itanium appears to be limited to
enthusiasts that occasionally boot a fresh Linux kernel to see whether
things are still working as intended, and perhaps to churn out some
distro packages that are rarely used in practice.

None of the original companies behind Itanium still produce or support
any hardware or software for the architecture, and it is listed as
'Orphaned' in the MAINTAINERS file, as apparently, none of the engineers
that contributed on behalf of those companies (nor anyone else, for that
matter) have been willing to support or maintain the architecture
upstream or even be responsible for applying the odd fix. The Intel
firmware team removed all IA-64 support from the Tianocore/EDK2
reference implementation of EFI in 2018. (Itanium is the original
architecture for which EFI was developed, and the way Linux supports it
deviates significantly from other architectures.) Some distros, such as
Debian and Gentoo, still maintain [unofficial] ia64 ports, but many have
dropped support years ago.

While the argument is being made [1] that there is a 'for the common
good' angle to being able to build and run existing projects such as the
Grid Community Toolkit [2] on Itanium for interoperability testing, the
fact remains that none of those projects are known to be deployed on
Linux/ia64, and very few people actually have access to such a system in
the first place. Even if there were ways imaginable in which Linux/ia64
could be put to good use today, what matters is whether anyone is
actually doing that, and this does not appear to be the case.

There are no emulators widely available, and so boot testing Itanium is
generally infeasible for ordinary contributors. GCC still supports IA-64
but its compile farm [3] no longer has any IA-64 machines. GLIBC would
like to get rid of IA-64 [4] too because it would permit some overdue
code cleanups. In summary, the benefits to the ecosystem of having IA-64
be part of it are mostly theoretical, whereas the maintenance overhead
of keeping it supported is real.

So let's rip off the band aid, and remove the IA-64 arch code entirely.
This follows the timeline proposed by the Debian/ia64 maintainer [5],
which removes support in a controlled manner, leaving IA-64 in a known
good state in the most recent LTS release. Other projects will follow
once the kernel support is removed.

[0] https://lore.kernel.org/all/CAMj1kXFCMh_578jniKpUtx_j8ByHnt=s7S+yQ+vGbKt9ud7+kQ@mail.gmail.com/
[1] https://lore.kernel.org/all/0075883c-7c51-00f5-2c2d-5119c1820410@web.de/
[2] https://gridcf.org/gct-docs/latest/index.html
[3] https://cfarm.tetaneutral.net/machines/list/
[4] https://lore.kernel.org/all/87bkiilpc4.fsf@mid.deneb.enyo.de/
[5] https://lore.kernel.org/all/ff58a3e76e5102c94bb5946d99187b358def688a.camel@physik.fu-berlin.de/

Acked-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2023-09-11 08:13:17 +00:00
Linus Torvalds
df57721f9a Add x86 shadow stack support
Convert IBT selftest to asm to fix objtool warning
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEV76QKkVc4xCGURexaDWVMHDJkrAFAmTv1QQACgkQaDWVMHDJ
 krAUwhAAn6TOwHJK8BSkHeiQhON1nrlP3c5cv0AyZ2NP8RYDrZrSZvhpYBJ6wgKC
 Cx5CGq5nn9twYsYS3KsktLKDfR3lRdsQ7K9qtyFtYiaeaVKo+7gEKl/K+klwai8/
 gninQWHk0zmSCja8Vi77q52WOMkQKapT8+vaON9EVDO8dVEi+CvhAIfPwMafuiwO
 Rk4X86SzoZu9FP79LcCg9XyGC/XbM2OG9eNUTSCKT40qTTKm5y4gix687NvAlaHR
 ko5MTsdl0Wfp6Qk0ohT74LnoA2c1g/FluvZIM33ci/2rFpkf9Hw7ip3lUXqn6CPx
 rKiZ+pVRc0xikVWkraMfIGMJfUd2rhelp8OyoozD7DB7UZw40Q4RW4N5tgq9Fhe9
 MQs3p1v9N8xHdRKl365UcOczUxNAmv4u0nV5gY/4FMC6VjldCl2V9fmqYXyzFS4/
 Ogg4FSd7c2JyGFKPs+5uXyi+RY2qOX4+nzHOoKD7SY616IYqtgKoz5usxETLwZ6s
 VtJOmJL0h//z0A7tBliB0zd+SQ5UQQBDC2XouQH2fNX2isJMn0UDmWJGjaHgK6Hh
 8jVp6LNqf+CEQS387UxckOyj7fu438hDky1Ggaw4YqowEOhQeqLVO4++x+HITrbp
 AupXfbJw9h9cMN63Yc0gVxXQ9IMZ+M7UxLtZ3Cd8/PVztNy/clA=
 =3UUm
 -----END PGP SIGNATURE-----

Merge tag 'x86_shstk_for_6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 shadow stack support from Dave Hansen:
 "This is the long awaited x86 shadow stack support, part of Intel's
  Control-flow Enforcement Technology (CET).

  CET consists of two related security features: shadow stacks and
  indirect branch tracking. This series implements just the shadow stack
  part of this feature, and just for userspace.

  The main use case for shadow stack is providing protection against
  return oriented programming attacks. It works by maintaining a
  secondary (shadow) stack using a special memory type that has
  protections against modification. When executing a CALL instruction,
  the processor pushes the return address to both the normal stack and
  to the special permission shadow stack. Upon RET, the processor pops
  the shadow stack copy and compares it to the normal stack copy.

  For more information, refer to the links below for the earlier
  versions of this patch set"

Link: https://lore.kernel.org/lkml/20220130211838.8382-1-rick.p.edgecombe@intel.com/
Link: https://lore.kernel.org/lkml/20230613001108.3040476-1-rick.p.edgecombe@intel.com/

* tag 'x86_shstk_for_6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (47 commits)
  x86/shstk: Change order of __user in type
  x86/ibt: Convert IBT selftest to asm
  x86/shstk: Don't retry vm_munmap() on -EINTR
  x86/kbuild: Fix Documentation/ reference
  x86/shstk: Move arch detail comment out of core mm
  x86/shstk: Add ARCH_SHSTK_STATUS
  x86/shstk: Add ARCH_SHSTK_UNLOCK
  x86: Add PTRACE interface for shadow stack
  selftests/x86: Add shadow stack test
  x86/cpufeatures: Enable CET CR4 bit for shadow stack
  x86/shstk: Wire in shadow stack interface
  x86: Expose thread features in /proc/$PID/status
  x86/shstk: Support WRSS for userspace
  x86/shstk: Introduce map_shadow_stack syscall
  x86/shstk: Check that signal frame is shadow stack mem
  x86/shstk: Check that SSP is aligned on sigreturn
  x86/shstk: Handle signals for shadow stack
  x86/shstk: Introduce routines modifying shstk
  x86/shstk: Handle thread shadow stack
  x86/shstk: Add user-mode shadow stack support
  ...
2023-08-31 12:20:12 -07:00
Linus Torvalds
d68b4b6f30 - An extensive rework of kexec and crash Kconfig from Eric DeVolder
("refactor Kconfig to consolidate KEXEC and CRASH options").
 
 - kernel.h slimming work from Andy Shevchenko ("kernel.h: Split out a
   couple of macros to args.h").
 
 - gdb feature work from Kuan-Ying Lee ("Add GDB memory helper
   commands").
 
 - vsprintf inclusion rationalization from Andy Shevchenko
   ("lib/vsprintf: Rework header inclusions").
 
 - Switch the handling of kdump from a udev scheme to in-kernel handling,
   by Eric DeVolder ("crash: Kernel handling of CPU and memory hot
   un/plug").
 
 - Many singleton patches to various parts of the tree
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZO2GpAAKCRDdBJ7gKXxA
 juW3AQD1moHzlSN6x9I3tjm5TWWNYFoFL8af7wXDJspp/DWH/AD/TO0XlWWhhbYy
 QHy7lL0Syha38kKLMXTM+bN6YQHi9AU=
 =WJQa
 -----END PGP SIGNATURE-----

Merge tag 'mm-nonmm-stable-2023-08-28-22-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull non-MM updates from Andrew Morton:

 - An extensive rework of kexec and crash Kconfig from Eric DeVolder
   ("refactor Kconfig to consolidate KEXEC and CRASH options")

 - kernel.h slimming work from Andy Shevchenko ("kernel.h: Split out a
   couple of macros to args.h")

 - gdb feature work from Kuan-Ying Lee ("Add GDB memory helper
   commands")

 - vsprintf inclusion rationalization from Andy Shevchenko
   ("lib/vsprintf: Rework header inclusions")

 - Switch the handling of kdump from a udev scheme to in-kernel
   handling, by Eric DeVolder ("crash: Kernel handling of CPU and memory
   hot un/plug")

 - Many singleton patches to various parts of the tree

* tag 'mm-nonmm-stable-2023-08-28-22-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (81 commits)
  document while_each_thread(), change first_tid() to use for_each_thread()
  drivers/char/mem.c: shrink character device's devlist[] array
  x86/crash: optimize CPU changes
  crash: change crash_prepare_elf64_headers() to for_each_possible_cpu()
  crash: hotplug support for kexec_load()
  x86/crash: add x86 crash hotplug support
  crash: memory and CPU hotplug sysfs attributes
  kexec: exclude elfcorehdr from the segment digest
  crash: add generic infrastructure for crash hotplug support
  crash: move a few code bits to setup support of crash hotplug
  kstrtox: consistently use _tolower()
  kill do_each_thread()
  nilfs2: fix WARNING in mark_buffer_dirty due to discarded buffer reuse
  scripts/bloat-o-meter: count weak symbol sizes
  treewide: drop CONFIG_EMBEDDED
  lockdep: fix static memory detection even more
  lib/vsprintf: declare no_hash_pointers in sprintf.h
  lib/vsprintf: split out sprintf() and friends
  kernel/fork: stop playing lockless games for exe_file replacement
  adfs: delete unused "union adfs_dirtail" definition
  ...
2023-08-29 14:53:51 -07:00
Jakob Koschel
349fde599d arch: enable HAS_LTO_CLANG with KASAN and KCOV
Both KASAN and KCOV had issues with LTO_CLANG if DEBUG_INFO is enabled. 
With LTO inlinable function calls are required to have debug info if they
are inlined into a function that has debug info.

Starting with LLVM 17 this will be fixed ([1],[2]) and enabling LTO with
KASAN/KCOV and DEBUG_INFO doesn't cause linker errors anymore.

Link: 913f7e93da
Link: 4a8b124930
Link: https://lkml.kernel.org/r/20230717-enable-kasan-lto1-v3-1-650e1efc19d1@gmail.com
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Jakob Koschel <jkl820.git@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Tom Rix <trix@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-08-18 10:18:56 -07:00
Eric DeVolder
89cde45591 kexec: consolidate kexec and crash options into kernel/Kconfig.kexec
Patch series "refactor Kconfig to consolidate KEXEC and CRASH options", v6.

The Kconfig is refactored to consolidate KEXEC and CRASH options from
various arch/<arch>/Kconfig files into new file kernel/Kconfig.kexec.

The Kconfig.kexec is now a submenu titled "Kexec and crash features"
located under "General Setup".

The following options are impacted:

 - KEXEC
 - KEXEC_FILE
 - KEXEC_SIG
 - KEXEC_SIG_FORCE
 - KEXEC_IMAGE_VERIFY_SIG
 - KEXEC_BZIMAGE_VERIFY_SIG
 - KEXEC_JUMP
 - CRASH_DUMP

Over time, these options have been copied between Kconfig files and
are very similar to one another, but with slight differences.

The following architectures are impacted by the refactor (because of
use of one or more KEXEC/CRASH options):

 - arm
 - arm64
 - ia64
 - loongarch
 - m68k
 - mips
 - parisc
 - powerpc
 - riscv
 - s390
 - sh
 - x86 

More information:

In the patch series "crash: Kernel handling of CPU and memory hot
un/plug"

 https://lore.kernel.org/lkml/20230503224145.7405-1-eric.devolder@oracle.com/

the new kernel feature introduces the config option CRASH_HOTPLUG.

In reviewing, Thomas Gleixner requested that the new config option
not be placed in x86 Kconfig. Rather the option needs a generic/common
home. To Thomas' point, the KEXEC and CRASH options have largely been
duplicated in the various arch/<arch>/Kconfig files, with minor
differences. This kind of proliferation is to be avoid/stopped.

 https://lore.kernel.org/lkml/875y91yv63.ffs@tglx/

To that end, I have refactored the arch Kconfigs so as to consolidate
the various KEXEC and CRASH options. Generally speaking, this work has
the following themes:

- KEXEC and CRASH options are moved into new file kernel/Kconfig.kexec
  - These items from arch/Kconfig:
      CRASH_CORE KEXEC_CORE KEXEC_ELF HAVE_IMA_KEXEC
  - These items from arch/x86/Kconfig form the common options:
      KEXEC KEXEC_FILE KEXEC_SIG KEXEC_SIG_FORCE
      KEXEC_BZIMAGE_VERIFY_SIG KEXEC_JUMP CRASH_DUMP
  - These items from arch/arm64/Kconfig form the common options:
      KEXEC_IMAGE_VERIFY_SIG
  - The crash hotplug series appends CRASH_HOTPLUG to Kconfig.kexec
- The Kconfig.kexec is now a submenu titled "Kexec and crash features"
  and is now listed in "General Setup" submenu from init/Kconfig.
- To control the common options, each has a new ARCH_SUPPORTS_<option>
  option. These gateway options determine whether the common options
  options are valid for the architecture.
- To account for the slight differences in the original architecture
  coding of the common options, each now has a corresponding
  ARCH_SELECTS_<option> which are used to elicit the same side effects
  as the original arch/<arch>/Kconfig files for KEXEC and CRASH options.

An example, 'make menuconfig' illustrating the submenu:

  > General setup > Kexec and crash features
  [*] Enable kexec system call
  [*] Enable kexec file based system call
  [*]   Verify kernel signature during kexec_file_load() syscall
  [ ]     Require a valid signature in kexec_file_load() syscall
  [ ]     Enable bzImage signature verification support
  [*] kexec jump
  [*] kernel crash dumps
  [*]   Update the crash elfcorehdr on system configuration changes

In the process of consolidating the common options, I encountered
slight differences in the coding of these options in several of the
architectures. As a result, I settled on the following solution:

- Each of the common options has a 'depends on ARCH_SUPPORTS_<option>'
  statement. For example, the KEXEC_FILE option has a 'depends on
  ARCH_SUPPORTS_KEXEC_FILE' statement.

  This approach is needed on all common options so as to prevent
  options from appearing for architectures which previously did
  not allow/enable them. For example, arm supports KEXEC but not
  KEXEC_FILE. The arch/arm/Kconfig does not provide
  ARCH_SUPPORTS_KEXEC_FILE and so KEXEC_FILE and related options
  are not available to arm.

- The boolean ARCH_SUPPORTS_<option> in effect allows the arch to
  determine when the feature is allowed.  Archs which don't have the
  feature simply do not provide the corresponding ARCH_SUPPORTS_<option>.
  For each arch, where there previously were KEXEC and/or CRASH
  options, these have been replaced with the corresponding boolean
  ARCH_SUPPORTS_<option>, and an appropriate def_bool statement.

  For example, if the arch supports KEXEC_FILE, then the
  ARCH_SUPPORTS_KEXEC_FILE simply has a 'def_bool y'. This permits
  the KEXEC_FILE option to be available.

  If the arch has a 'depends on' statement in its original coding
  of the option, then that expression becomes part of the def_bool
  expression. For example, arm64 had:

  config KEXEC
    depends on PM_SLEEP_SMP

  and in this solution, this converts to:

  config ARCH_SUPPORTS_KEXEC
    def_bool PM_SLEEP_SMP


- In order to account for the architecture differences in the
  coding for the common options, the ARCH_SELECTS_<option> in the
  arch/<arch>/Kconfig is used. This option has a 'depends on
  <option>' statement to couple it to the main option, and from
  there can insert the differences from the common option and the
  arch original coding of that option.

  For example, a few archs enable CRYPTO and CRYTPO_SHA256 for
  KEXEC_FILE. These require a ARCH_SELECTS_KEXEC_FILE and
  'select CRYPTO' and 'select CRYPTO_SHA256' statements.

Illustrating the option relationships:

For each of the common KEXEC and CRASH options:
 ARCH_SUPPORTS_<option> <- <option> <- ARCH_SELECTS_<option>

 <option>                   # in Kconfig.kexec
 ARCH_SUPPORTS_<option>     # in arch/<arch>/Kconfig, as needed
 ARCH_SELECTS_<option>      # in arch/<arch>/Kconfig, as needed


For example, KEXEC:
 ARCH_SUPPORTS_KEXEC <- KEXEC <- ARCH_SELECTS_KEXEC

 KEXEC                      # in Kconfig.kexec
 ARCH_SUPPORTS_KEXEC        # in arch/<arch>/Kconfig, as needed
 ARCH_SELECTS_KEXEC         # in arch/<arch>/Kconfig, as needed


To summarize, the ARCH_SUPPORTS_<option> permits the <option> to be
enabled, and the ARCH_SELECTS_<option> handles side effects (ie.
select statements).

Examples:
A few examples to show the new strategy in action:

===== x86 (minus the help section) =====
Original:
 config KEXEC
    bool "kexec system call"
    select KEXEC_CORE

 config KEXEC_FILE
    bool "kexec file based system call"
    select KEXEC_CORE
    select HAVE_IMA_KEXEC if IMA
    depends on X86_64
    depends on CRYPTO=y
    depends on CRYPTO_SHA256=y

 config ARCH_HAS_KEXEC_PURGATORY
    def_bool KEXEC_FILE

 config KEXEC_SIG
    bool "Verify kernel signature during kexec_file_load() syscall"
    depends on KEXEC_FILE

 config KEXEC_SIG_FORCE
    bool "Require a valid signature in kexec_file_load() syscall"
    depends on KEXEC_SIG

 config KEXEC_BZIMAGE_VERIFY_SIG
    bool "Enable bzImage signature verification support"
    depends on KEXEC_SIG
    depends on SIGNED_PE_FILE_VERIFICATION
    select SYSTEM_TRUSTED_KEYRING

 config CRASH_DUMP
    bool "kernel crash dumps"
    depends on X86_64 || (X86_32 && HIGHMEM)

 config KEXEC_JUMP
    bool "kexec jump"
    depends on KEXEC && HIBERNATION
    help

becomes...
New:
config ARCH_SUPPORTS_KEXEC
    def_bool y

config ARCH_SUPPORTS_KEXEC_FILE
    def_bool X86_64 && CRYPTO && CRYPTO_SHA256

config ARCH_SELECTS_KEXEC_FILE
    def_bool y
    depends on KEXEC_FILE
    select HAVE_IMA_KEXEC if IMA

config ARCH_SUPPORTS_KEXEC_PURGATORY
    def_bool KEXEC_FILE

config ARCH_SUPPORTS_KEXEC_SIG
    def_bool y

config ARCH_SUPPORTS_KEXEC_SIG_FORCE
    def_bool y

config ARCH_SUPPORTS_KEXEC_BZIMAGE_VERIFY_SIG
    def_bool y

config ARCH_SUPPORTS_KEXEC_JUMP
    def_bool y

config ARCH_SUPPORTS_CRASH_DUMP
    def_bool X86_64 || (X86_32 && HIGHMEM)


===== powerpc (minus the help section) =====
Original:
 config KEXEC
    bool "kexec system call"
    depends on PPC_BOOK3S || PPC_E500 || (44x && !SMP)
    select KEXEC_CORE

 config KEXEC_FILE
    bool "kexec file based system call"
    select KEXEC_CORE
    select HAVE_IMA_KEXEC if IMA
    select KEXEC_ELF
    depends on PPC64
    depends on CRYPTO=y
    depends on CRYPTO_SHA256=y

 config ARCH_HAS_KEXEC_PURGATORY
    def_bool KEXEC_FILE

 config CRASH_DUMP
    bool "Build a dump capture kernel"
    depends on PPC64 || PPC_BOOK3S_32 || PPC_85xx || (44x && !SMP)
    select RELOCATABLE if PPC64 || 44x || PPC_85xx

becomes...
New:
config ARCH_SUPPORTS_KEXEC
    def_bool PPC_BOOK3S || PPC_E500 || (44x && !SMP)

config ARCH_SUPPORTS_KEXEC_FILE
    def_bool PPC64 && CRYPTO=y && CRYPTO_SHA256=y

config ARCH_SUPPORTS_KEXEC_PURGATORY
    def_bool KEXEC_FILE

config ARCH_SELECTS_KEXEC_FILE
    def_bool y
    depends on KEXEC_FILE
    select KEXEC_ELF
    select HAVE_IMA_KEXEC if IMA

config ARCH_SUPPORTS_CRASH_DUMP
    def_bool PPC64 || PPC_BOOK3S_32 || PPC_85xx || (44x && !SMP)

config ARCH_SELECTS_CRASH_DUMP
    def_bool y
    depends on CRASH_DUMP
    select RELOCATABLE if PPC64 || 44x || PPC_85xx


Testing Approach and Results

There are 388 config files in the arch/<arch>/configs directories.
For each of these config files, a .config is generated both before and
after this Kconfig series, and checked for equivalence. This approach
allows for a rather rapid check of all architectures and a wide
variety of configs wrt/ KEXEC and CRASH, and avoids requiring
compiling for all architectures and running kernels and run-time
testing.

For each config file, the olddefconfig, allnoconfig and allyesconfig
targets are utilized. In testing the randconfig has revealed problems
as well, but is not used in the before and after equivalence check
since one can not generate the "same" .config for before and after,
even if using the same KCONFIG_SEED since the option list is
different.

As such, the following script steps compare the before and after
of 'make olddefconfig'. The new symbols introduced by this series
are filtered out, but otherwise the config files are PASS only if
they were equivalent, and FAIL otherwise.

The script performs the test by doing the following:

 # Obtain the "golden" .config output for given config file
 # Reset test sandbox
 git checkout master
 git branch -D test_Kconfig
 git checkout -B test_Kconfig master
 make distclean
 # Write out updated config
 cp -f <config file> .config
 make ARCH=<arch> olddefconfig
 # Track each item in .config, LHSB is "golden"
 scoreboard .config 

 # Obtain the "changed" .config output for given config file
 # Reset test sandbox
 make distclean
 # Apply this Kconfig series
 git am <this Kconfig series>
 # Write out updated config
 cp -f <config file> .config
 make ARCH=<arch> olddefconfig
 # Track each item in .config, RHSB is "changed"
 scoreboard .config 

 # Determine test result
 # Filter-out new symbols introduced by this series
 # Filter-out symbol=n which not in either scoreboard
 # Compare LHSB "golden" and RHSB "changed" scoreboards and issue PASS/FAIL

The script was instrumental during the refactoring of Kconfig as it
continually revealed problems. The end result being that the solution
presented in this series passes all configs as checked by the script,
with the following exceptions:

- arch/ia64/configs/zx1_config with olddefconfig
  This config file has:
  # CONFIG_KEXEC is not set
  CONFIG_CRASH_DUMP=y
  and this refactor now couples KEXEC to CRASH_DUMP, so it is not
  possible to enable CRASH_DUMP without KEXEC.

- arch/sh/configs/* with allyesconfig
  The arch/sh/Kconfig codes CRASH_DUMP as dependent upon BROKEN_ON_MMU
  (which clearly is not meant to be set). This symbol is not provided
  but with the allyesconfig it is set to yes which enables CRASH_DUMP.
  But KEXEC is coded as dependent upon MMU, and is set to no in
  arch/sh/mm/Kconfig, so KEXEC is not enabled.
  This refactor now couples KEXEC to CRASH_DUMP, so it is not
  possible to enable CRASH_DUMP without KEXEC.

While the above exceptions are not equivalent to their original,
the config file produced is valid (and in fact better wrt/ CRASH_DUMP
handling).


This patch (of 14)

The config options for kexec and crash features are consolidated
into new file kernel/Kconfig.kexec. Under the "General Setup" submenu
is a new submenu "Kexec and crash handling". All the kexec and
crash options that were once in the arch-dependent submenu "Processor
type and features" are now consolidated in the new submenu.

The following options are impacted:

 - KEXEC
 - KEXEC_FILE
 - KEXEC_SIG
 - KEXEC_SIG_FORCE
 - KEXEC_BZIMAGE_VERIFY_SIG
 - KEXEC_JUMP
 - CRASH_DUMP

The three main options are KEXEC, KEXEC_FILE and CRASH_DUMP.

Architectures specify support of certain KEXEC and CRASH features with
similarly named new ARCH_SUPPORTS_<option> config options.

Architectures can utilize the new ARCH_SELECTS_<option> config
options to specify additional components when <option> is enabled.

To summarize, the ARCH_SUPPORTS_<option> permits the <option> to be
enabled, and the ARCH_SELECTS_<option> handles side effects (ie.
select statements).

Link: https://lkml.kernel.org/r/20230712161545.87870-1-eric.devolder@oracle.com
Link: https://lkml.kernel.org/r/20230712161545.87870-2-eric.devolder@oracle.com
Signed-off-by: Eric DeVolder <eric.devolder@oracle.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Baoquan He <bhe@redhat.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Cc. "H. Peter Anvin" <hpa@zytor.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@linux.intel.com> # for x86
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Juerg Haefliger <juerg.haefliger@canonical.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Marc Aurèle La France <tsi@tuyoix.net>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Cc: Sami Tolvanen <samitolvanen@google.com>
Cc: Sebastian Reichel <sebastian.reichel@collabora.com>
Cc: Sourabh Jain <sourabhjain@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Will Deacon <will@kernel.org>
Cc: Xin Li <xin3.li@intel.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Zhen Lei <thunder.leizhen@huawei.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-08-18 10:18:51 -07:00
Michael Ellerman
38253464bc cpu/SMT: Create topology_smt_thread_allowed()
Some architectures allows partial SMT states, i.e. when not all SMT threads
are brought online.

To support that, add an architecture helper which checks whether a given
CPU is allowed to be brought online depending on how many SMT threads are
currently enabled. Since this is only applicable to architecture supporting
partial SMT, only these architectures should select the new configuration
variable CONFIG_SMT_NUM_THREADS_DYNAMIC. For the other architectures, not
supporting the partial SMT states, there is no need to define
topology_cpu_smt_allowed(), the generic code assumed that all the threads
are allowed or only the primary ones.

Call the helper from cpu_smt_enable(), and cpu_smt_allowed() when SMT is
enabled, to check if the particular thread should be onlined. Notably,
also call it from cpu_smt_disable() if CPU_SMT_ENABLED, to allow
offlining some threads to move from a higher to lower number of threads
online.

[ ldufour: Slightly reword the commit's description ]
[ ldufour: Introduce CONFIG_SMT_NUM_THREADS_DYNAMIC ]

Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Link: https://lore.kernel.org/r/20230705145143.40545-7-ldufour@linux.ibm.com
2023-07-28 09:53:37 +02:00
Rick Edgecombe
2f0584f3f4 mm: Rename arch pte_mkwrite()'s to pte_mkwrite_novma()
The x86 Shadow stack feature includes a new type of memory called shadow
stack. This shadow stack memory has some unusual properties, which requires
some core mm changes to function properly.

One of these unusual properties is that shadow stack memory is writable,
but only in limited ways. These limits are applied via a specific PTE
bit combination. Nevertheless, the memory is writable, and core mm code
will need to apply the writable permissions in the typical paths that
call pte_mkwrite(). The goal is to make pte_mkwrite() take a VMA, so
that the x86 implementation of it can know whether to create regular
writable or shadow stack mappings.

But there are a couple of challenges to this. Modifying the signatures of
each arch pte_mkwrite() implementation would be error prone because some
are generated with macros and would need to be re-implemented. Also, some
pte_mkwrite() callers operate on kernel memory without a VMA.

So this can be done in a three step process. First pte_mkwrite() can be
renamed to pte_mkwrite_novma() in each arch, with a generic pte_mkwrite()
added that just calls pte_mkwrite_novma(). Next callers without a VMA can
be moved to pte_mkwrite_novma(). And lastly, pte_mkwrite() and all callers
can be changed to take/pass a VMA.

Start the process by renaming pte_mkwrite() to pte_mkwrite_novma() and
adding the pte_mkwrite() wrapper in linux/pgtable.h. Apply the same
pattern for pmd_mkwrite(). Since not all archs have a pmd_mkwrite_novma(),
create a new arch config HAS_HUGE_PAGE that can be used to tell if
pmd_mkwrite() should be defined. Otherwise in the !HAS_HUGE_PAGE cases the
compiler would not be able to find pmd_mkwrite_novma().

No functional change.

Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/lkml/CAHk-=wiZjSu7c9sFYZb3q04108stgHff2wfbokGCCgW7riz+8Q@mail.gmail.com/
Link: https://lore.kernel.org/all/20230613001108.3040476-2-rick.p.edgecombe%40intel.com
2023-07-11 14:10:56 -07:00
Linus Torvalds
77b1a7f7a0 - Arnd Bergmann has fixed a bunch of -Wmissing-prototypes in
top-level directories.
 
 - Douglas Anderson has added a new "buddy" mode to the hardlockup
   detector.  It permits the detector to work on architectures which
   cannot provide the required interrupts, by having CPUs periodically
   perform checks on other CPUs.
 
 - Zhen Lei has enhanced kexec's ability to support two crash regions.
 
 - Petr Mladek has done a lot of cleanup on the hard lockup detector's
   Kconfig entries.
 
 - And the usual bunch of singleton patches in various places.
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZJelTAAKCRDdBJ7gKXxA
 juDkAP0VXWynzkXoojdS/8e/hhi+htedmQ3v2dLZD+vBrctLhAEA7rcH58zAVoWa
 2ejqO6wDrRGUC7JQcO9VEjT0nv73UwU=
 =F293
 -----END PGP SIGNATURE-----

Merge tag 'mm-nonmm-stable-2023-06-24-19-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull non-mm updates from Andrew Morton:

 - Arnd Bergmann has fixed a bunch of -Wmissing-prototypes in top-level
   directories

 - Douglas Anderson has added a new "buddy" mode to the hardlockup
   detector. It permits the detector to work on architectures which
   cannot provide the required interrupts, by having CPUs periodically
   perform checks on other CPUs

 - Zhen Lei has enhanced kexec's ability to support two crash regions

 - Petr Mladek has done a lot of cleanup on the hard lockup detector's
   Kconfig entries

 - And the usual bunch of singleton patches in various places

* tag 'mm-nonmm-stable-2023-06-24-19-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (72 commits)
  kernel/time/posix-stubs.c: remove duplicated include
  ocfs2: remove redundant assignment to variable bit_off
  watchdog/hardlockup: fix typo in config HARDLOCKUP_DETECTOR_PREFER_BUDDY
  powerpc: move arch_trigger_cpumask_backtrace from nmi.h to irq.h
  devres: show which resource was invalid in __devm_ioremap_resource()
  watchdog/hardlockup: define HARDLOCKUP_DETECTOR_ARCH
  watchdog/sparc64: define HARDLOCKUP_DETECTOR_SPARC64
  watchdog/hardlockup: make HAVE_NMI_WATCHDOG sparc64-specific
  watchdog/hardlockup: declare arch_touch_nmi_watchdog() only in linux/nmi.h
  watchdog/hardlockup: make the config checks more straightforward
  watchdog/hardlockup: sort hardlockup detector related config values a logical way
  watchdog/hardlockup: move SMP barriers from common code to buddy code
  watchdog/buddy: simplify the dependency for HARDLOCKUP_DETECTOR_PREFER_BUDDY
  watchdog/buddy: don't copy the cpumask in watchdog_next_cpu()
  watchdog/buddy: cleanup how watchdog_buddy_check_hardlockup() is called
  watchdog/hardlockup: remove softlockup comment in touch_nmi_watchdog()
  watchdog/hardlockup: in watchdog_hardlockup_check() use cpumask_copy()
  watchdog/hardlockup: don't use raw_cpu_ptr() in watchdog_hardlockup_kick()
  watchdog/hardlockup: HAVE_NMI_WATCHDOG must implement watchdog_hardlockup_probe()
  watchdog/hardlockup: keep kernel.nmi_watchdog sysctl as 0444 if probe fails
  ...
2023-06-28 10:59:38 -07:00
Linus Torvalds
26642864f8 Landlock updates for v6.5-rc1
-----BEGIN PGP SIGNATURE-----
 
 iIYEABYIAC4WIQSVyBthFV4iTW/VU1/l49DojIL20gUCZJlO/xAcbWljQGRpZ2lr
 b2QubmV0AAoJEOXj0OiMgvbS/FwA/A5GFGtKnLzFpIAXgc1G3kr8c+J/WF7RVUD+
 PJNEsH6PAP41l3BTqVSeVZ+tdLSC7NbesoX0MTd+rCgAWnr+Pko2Cw==
 =KqpG
 -----END PGP SIGNATURE-----

Merge tag 'landlock-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux

Pull landlock updates from Mickaël Salaün:
 "Add support for Landlock to UML.

  To do this, this fixes the way hostfs manages inodes according to the
  underlying filesystem [1]. They are now properly handled as for other
  filesystems, which enables Landlock support (and probably other
  features).

  This also extends Landlock's tests with 6 pseudo filesystems,
  including hostfs"

[1] https://lore.kernel.org/all/20230612191430.339153-1-mic@digikod.net/

* tag 'landlock-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
  selftests/landlock: Add hostfs tests
  selftests/landlock: Add tests for pseudo filesystems
  selftests/landlock: Make mounts configurable
  selftests/landlock: Add supports_filesystem() helper
  selftests/landlock: Don't create useless file layouts
  hostfs: Fix ephemeral inodes
2023-06-27 17:10:27 -07:00
Linus Torvalds
9244724fbf A large update for SMP management:
- Parallel CPU bringup
 
     The reason why people are interested in parallel bringup is to shorten
     the (kexec) reboot time of cloud servers to reduce the downtime of the
     VM tenants.
 
     The current fully serialized bringup does the following per AP:
 
       1) Prepare callbacks (allocate, intialize, create threads)
       2) Kick the AP alive (e.g. INIT/SIPI on x86)
       3) Wait for the AP to report alive state
       4) Let the AP continue through the atomic bringup
       5) Let the AP run the threaded bringup to full online state
 
     There are two significant delays:
 
       #3 The time for an AP to report alive state in start_secondary() on
          x86 has been measured in the range between 350us and 3.5ms
          depending on vendor and CPU type, BIOS microcode size etc.
 
       #4 The atomic bringup does the microcode update. This has been
          measured to take up to ~8ms on the primary threads depending on
          the microcode patch size to apply.
 
     On a two socket SKL server with 56 cores (112 threads) the boot CPU
     spends on current mainline about 800ms busy waiting for the APs to come
     up and apply microcode. That's more than 80% of the actual onlining
     procedure.
 
     This can be reduced significantly by splitting the bringup mechanism
     into two parts:
 
       1) Run the prepare callbacks and kick the AP alive for each AP which
       	 needs to be brought up.
 
 	 The APs wake up, do their firmware initialization and run the low
       	 level kernel startup code including microcode loading in parallel
       	 up to the first synchronization point. (#1 and #2 above)
 
       2) Run the rest of the bringup code strictly serialized per CPU
       	 (#3 - #5 above) as it's done today.
 
 	 Parallelizing that stage of the CPU bringup might be possible in
 	 theory, but it's questionable whether required surgery would be
 	 justified for a pretty small gain.
 
     If the system is large enough the first AP is already waiting at the
     first synchronization point when the boot CPU finished the wake-up of
     the last AP. That reduces the AP bringup time on that SKL from ~800ms
     to ~80ms, i.e. by a factor ~10x.
 
     The actual gain varies wildly depending on the system, CPU, microcode
     patch size and other factors. There are some opportunities to reduce
     the overhead further, but that needs some deep surgery in the x86 CPU
     bringup code.
 
     For now this is only enabled on x86, but the core functionality
     obviously works for all SMP capable architectures.
 
   - Enhancements for SMP function call tracing so it is possible to locate
     the scheduling and the actual execution points. That allows to measure
     IPI delivery time precisely.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmSZb/YTHHRnbHhAbGlu
 dXRyb25peC5kZQAKCRCmGPVMDXSYoRoOD/9vAiGI3IhGyZcX/RjXxauSHf8Pmqll
 05jUubFi5Vi3tKI1ubMOsnMmJTw2yy5xDyS/iGj7AcbRLq9uQd3iMtsXXHNBzo/X
 FNxnuWTXYUj0vcOYJ+j4puBumFzzpRCprqccMInH0kUnSWzbnaQCeelicZORAf+w
 zUYrswK4HpBXHDOnvPw6Z7MYQe+zyDQSwjSftstLyROzu+lCEw/9KUaysY2epShJ
 wHClxS2XqMnpY4rJ/CmJAlRhD0Plb89zXyo6k9YZYVDWoAcmBZy6vaTO4qoR171L
 37ApqrgsksMkjFycCMnmrFIlkeb7bkrYDQ5y+xqC3JPTlYDKOYmITV5fZ83HD77o
 K7FAhl/CgkPq2Ec+d82GFLVBKR1rijbwHf7a0nhfUy0yMeaJCxGp4uQ45uQ09asi
 a/VG2T38EgxVdseC92HRhcdd3pipwCb5wqjCH/XdhdlQrk9NfeIeP+TxF4QhADhg
 dApp3ifhHSnuEul7+HNUkC6U+Zc8UeDPdu5lvxSTp2ooQ0JwaGgC5PJq3nI9RUi2
 Vv826NHOknEjFInOQcwvp6SJPfcuSTF75Yx6xKz8EZ3HHxpvlolxZLq+3ohSfOKn
 2efOuZO5bEu4S/G2tRDYcy+CBvNVSrtZmCVqSOS039c8quBWQV7cj0334cjzf+5T
 TRiSzvssbYYmaw==
 =Y8if
 -----END PGP SIGNATURE-----

Merge tag 'smp-core-2023-06-26' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull SMP updates from Thomas Gleixner:
 "A large update for SMP management:

   - Parallel CPU bringup

     The reason why people are interested in parallel bringup is to
     shorten the (kexec) reboot time of cloud servers to reduce the
     downtime of the VM tenants.

     The current fully serialized bringup does the following per AP:

       1) Prepare callbacks (allocate, intialize, create threads)
       2) Kick the AP alive (e.g. INIT/SIPI on x86)
       3) Wait for the AP to report alive state
       4) Let the AP continue through the atomic bringup
       5) Let the AP run the threaded bringup to full online state

     There are two significant delays:

       #3 The time for an AP to report alive state in start_secondary()
          on x86 has been measured in the range between 350us and 3.5ms
          depending on vendor and CPU type, BIOS microcode size etc.

       #4 The atomic bringup does the microcode update. This has been
          measured to take up to ~8ms on the primary threads depending
          on the microcode patch size to apply.

     On a two socket SKL server with 56 cores (112 threads) the boot CPU
     spends on current mainline about 800ms busy waiting for the APs to
     come up and apply microcode. That's more than 80% of the actual
     onlining procedure.

     This can be reduced significantly by splitting the bringup
     mechanism into two parts:

       1) Run the prepare callbacks and kick the AP alive for each AP
          which needs to be brought up.

          The APs wake up, do their firmware initialization and run the
          low level kernel startup code including microcode loading in
          parallel up to the first synchronization point. (#1 and #2
          above)

       2) Run the rest of the bringup code strictly serialized per CPU
          (#3 - #5 above) as it's done today.

          Parallelizing that stage of the CPU bringup might be possible
          in theory, but it's questionable whether required surgery
          would be justified for a pretty small gain.

     If the system is large enough the first AP is already waiting at
     the first synchronization point when the boot CPU finished the
     wake-up of the last AP. That reduces the AP bringup time on that
     SKL from ~800ms to ~80ms, i.e. by a factor ~10x.

     The actual gain varies wildly depending on the system, CPU,
     microcode patch size and other factors. There are some
     opportunities to reduce the overhead further, but that needs some
     deep surgery in the x86 CPU bringup code.

     For now this is only enabled on x86, but the core functionality
     obviously works for all SMP capable architectures.

   - Enhancements for SMP function call tracing so it is possible to
     locate the scheduling and the actual execution points. That allows
     to measure IPI delivery time precisely"

* tag 'smp-core-2023-06-26' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip: (45 commits)
  trace,smp: Add tracepoints for scheduling remotelly called functions
  trace,smp: Add tracepoints around remotelly called functions
  MAINTAINERS: Add CPU HOTPLUG entry
  x86/smpboot: Fix the parallel bringup decision
  x86/realmode: Make stack lock work in trampoline_compat()
  x86/smp: Initialize cpu_primary_thread_mask late
  cpu/hotplug: Fix off by one in cpuhp_bringup_mask()
  x86/apic: Fix use of X{,2}APIC_ENABLE in asm with older binutils
  x86/smpboot/64: Implement arch_cpuhp_init_parallel_bringup() and enable it
  x86/smpboot: Support parallel startup of secondary CPUs
  x86/smpboot: Implement a bit spinlock to protect the realmode stack
  x86/apic: Save the APIC virtual base address
  cpu/hotplug: Allow "parallel" bringup up to CPUHP_BP_KICK_AP_STATE
  x86/apic: Provide cpu_primary_thread mask
  x86/smpboot: Enable split CPU startup
  cpu/hotplug: Provide a split up CPUHP_BRINGUP mechanism
  cpu/hotplug: Reset task stack state in _cpu_up()
  cpu/hotplug: Remove unused state functions
  riscv: Switch to hotplug core state synchronization
  parisc: Switch to hotplug core state synchronization
  ...
2023-06-26 13:59:56 -07:00
Petr Mladek
a5fcc2367e watchdog/hardlockup: make HAVE_NMI_WATCHDOG sparc64-specific
There are several hardlockup detector implementations and several Kconfig
values which allow selection and build of the preferred one.

CONFIG_HARDLOCKUP_DETECTOR was introduced by the commit 23637d477c
("lockup_detector: Introduce CONFIG_HARDLOCKUP_DETECTOR") in v2.6.36.
It was a preparation step for introducing the new generic perf hardlockup
detector.

The existing arch-specific variants did not support the to-be-created
generic build configurations, sysctl interface, etc. This distinction
was made explicit by the commit 4a7863cc2e ("x86, nmi_watchdog:
Remove ARCH_HAS_NMI_WATCHDOG and rely on CONFIG_HARDLOCKUP_DETECTOR")
in v2.6.38.

CONFIG_HAVE_NMI_WATCHDOG was introduced by the commit d314d74c69
("nmi watchdog: do not use cpp symbol in Kconfig") in v3.4-rc1. It replaced
the above mentioned ARCH_HAS_NMI_WATCHDOG. At that time, it was still used
by three architectures, namely blackfin, mn10300, and sparc.

The support for blackfin and mn10300 architectures has been completely
dropped some time ago. And sparc is the only architecture with the historic
NMI watchdog at the moment.

And the old sparc implementation is really special. It is always built on
sparc64. It used to be always enabled until the commit 7a5c8b57ce
("sparc: implement watchdog_nmi_enable and watchdog_nmi_disable") added
in v4.10-rc1.

There are only few locations where the sparc64 NMI watchdog interacts
with the generic hardlockup detectors code:

  + implements arch_touch_nmi_watchdog() which is called from the generic
    touch_nmi_watchdog()

  + implements watchdog_hardlockup_enable()/disable() to support
    /proc/sys/kernel/nmi_watchdog

  + is always preferred over other generic watchdogs, see
    CONFIG_HARDLOCKUP_DETECTOR

  + includes asm/nmi.h into linux/nmi.h because some sparc-specific
    functions are needed in sparc-specific code which includes
    only linux/nmi.h.

The situation became more complicated after the commit 05a4a95279
("kernel/watchdog: split up config options") and commit 2104180a53
("powerpc/64s: implement arch-specific hardlockup watchdog") in v4.13-rc1.
They introduced HAVE_HARDLOCKUP_DETECTOR_ARCH. It was used for powerpc
specific hardlockup detector. It was compatible with the perf one
regarding the general boot, sysctl, and programming interfaces.

HAVE_HARDLOCKUP_DETECTOR_ARCH was defined as a superset of
HAVE_NMI_WATCHDOG. It made some sense because all arch-specific
detectors had some common requirements, namely:

  + implemented arch_touch_nmi_watchdog()
  + included asm/nmi.h into linux/nmi.h
  + defined the default value for /proc/sys/kernel/nmi_watchdog

But it actually has made things pretty complicated when the generic
buddy hardlockup detector was added. Before the generic perf detector
was newer supported together with an arch-specific one. But the buddy
detector could work on any SMP system. It means that an architecture
could support both the arch-specific and buddy detector.

As a result, there are few tricky dependencies. For example,
CONFIG_HARDLOCKUP_DETECTOR depends on:

  ((HAVE_HARDLOCKUP_DETECTOR_PERF || HAVE_HARDLOCKUP_DETECTOR_BUDDY) && !HAVE_NMI_WATCHDOG) || HAVE_HARDLOCKUP_DETECTOR_ARCH

The problem is that the very special sparc implementation is defined as:

  HAVE_NMI_WATCHDOG && !HAVE_HARDLOCKUP_DETECTOR_ARCH

Another problem is that the meaning of HAVE_NMI_WATCHDOG is far from clear
without reading understanding the history.

Make the logic less tricky and more self-explanatory by making
HAVE_NMI_WATCHDOG specific for the sparc64 implementation. And rename it to
HAVE_HARDLOCKUP_DETECTOR_SPARC64.

Note that HARDLOCKUP_DETECTOR_PREFER_BUDDY, HARDLOCKUP_DETECTOR_PERF,
and HARDLOCKUP_DETECTOR_BUDDY may conflict only with
HAVE_HARDLOCKUP_DETECTOR_ARCH. They depend on HARDLOCKUP_DETECTOR
and it is not longer enabled when HAVE_NMI_WATCHDOG is set.

Link: https://lkml.kernel.org/r/20230616150618.6073-5-pmladek@suse.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-19 16:25:29 -07:00
Petr Mladek
1356d0b966 watchdog/hardlockup: make the config checks more straightforward
There are four possible variants of hardlockup detectors:

  + buddy: available when SMP is set.

  + perf: available when HAVE_HARDLOCKUP_DETECTOR_PERF is set.

  + arch-specific: available when HAVE_HARDLOCKUP_DETECTOR_ARCH is set.

  + sparc64 special variant: available when HAVE_NMI_WATCHDOG is set
	and HAVE_HARDLOCKUP_DETECTOR_ARCH is not set.

The check for the sparc64 variant is more complicated because
HAVE_NMI_WATCHDOG is used to #ifdef code used by both arch-specific
and sparc64 specific variant. Therefore it is automatically
selected with HAVE_HARDLOCKUP_DETECTOR_ARCH.

This complexity is partly hidden in HAVE_HARDLOCKUP_DETECTOR_NON_ARCH.
It reduces the size of some checks but it makes them harder to follow.

Finally, the other temporary variable HARDLOCKUP_DETECTOR_NON_ARCH
is used to re-compute HARDLOCKUP_DETECTOR_PERF/BUDDY when the global
HARDLOCKUP_DETECTOR switch is enabled/disabled.

Make the logic more straightforward by the following changes:

  + Better explain the role of HAVE_HARDLOCKUP_DETECTOR_ARCH and
    HAVE_NMI_WATCHDOG in comments.

  + Add HAVE_HARDLOCKUP_DETECTOR_BUDDY so that there is separate
    HAVE_* for all four hardlockup detector variants.

    Use it in the other conditions instead of SMP. It makes it
    clear that it is about the buddy detector.

  + Open code HAVE_HARDLOCKUP_DETECTOR_NON_ARCH in HARDLOCKUP_DETECTOR
    and HARDLOCKUP_DETECTOR_PREFER_BUDDY. It helps to understand
    the conditions between the four hardlockup detector variants.

  + Define the exact conditions when HARDLOCKUP_DETECTOR_PERF/BUDDY
    can be enabled. It explains the dependency on the other
    hardlockup detector variants.

    Also it allows to remove HARDLOCKUP_DETECTOR_NON_ARCH by using "imply".
    It triggers re-evaluating HARDLOCKUP_DETECTOR_PERF/BUDDY when
    the global HARDLOCKUP_DETECTOR switch is changed.

  + Add dependency on HARDLOCKUP_DETECTOR so that the affected variables
    disappear when the hardlockup detectors are disabled.

    Another nice side effect is that HARDLOCKUP_DETECTOR_PREFER_BUDDY
    value is not preserved when the global switch is disabled.
    The user has to make the decision again when it gets re-enabled.

Link: https://lkml.kernel.org/r/20230616150618.6073-3-pmladek@suse.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-19 16:25:28 -07:00
Douglas Anderson
6426e8d1f2 watchdog/hardlockup: HAVE_NMI_WATCHDOG must implement watchdog_hardlockup_probe()
Right now there is one arch (sparc64) that selects HAVE_NMI_WATCHDOG
without selecting HAVE_HARDLOCKUP_DETECTOR_ARCH.  Because of that one
architecture, we have some special case code in the watchdog core to
handle the fact that watchdog_hardlockup_probe() isn't implemented.

Let's implement watchdog_hardlockup_probe() for sparc64 and get rid of the
special case.

As a side effect of doing this, code inspection tells us that we could fix
a minor bug where the system won't properly realize that NMI watchdogs are
disabled.  Specifically, on powerpc if CONFIG_PPC_WATCHDOG is turned off
the arch might still select CONFIG_HAVE_HARDLOCKUP_DETECTOR_ARCH which
selects CONFIG_HAVE_NMI_WATCHDOG.  Since CONFIG_PPC_WATCHDOG was off then
nothing will override the "weak" watchdog_hardlockup_probe() and we'll
fallback to looking at CONFIG_HAVE_NMI_WATCHDOG.

Link: https://lkml.kernel.org/r/20230526184139.2.Ic6ebbf307ca0efe91f08ce2c1eb4a037ba6b0700@changeid
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Suggested-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-19 16:25:26 -07:00
Thomas Gleixner
7725acaa4f init: Provide arch_cpu_finalize_init()
check_bugs() has become a dumping ground for all sorts of activities to
finalize the CPU initialization before running the rest of the init code.

Most are empty, a few do actual bug checks, some do alternative patching
and some cobble a CPU advertisement string together....

Aside of that the current implementation requires duplicated function
declaration and mostly empty header files for them.

Provide a new function arch_cpu_finalize_init(). Provide a generic
declaration if CONFIG_ARCH_HAS_CPU_FINALIZE_INIT is selected and a stub
inline otherwise.

This requires a temporary #ifdef in start_kernel() which will be removed
along with check_bugs() once the architectures are converted over.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20230613224544.957805717@linutronix.de
2023-06-16 10:15:59 +02:00
Mickaël Salaün
74ce793bcb
hostfs: Fix ephemeral inodes
hostfs creates a new inode for each opened or created file, which
created useless inode allocations and forbade identifying a host file
with a kernel inode.

Fix this uncommon filesystem behavior by tying kernel inodes to host
file's inode and device IDs.  Even if the host filesystem inodes may be
recycled, this cannot happen while a file referencing it is opened,
which is the case with hostfs.  It should be noted that hostfs inode IDs
may not be unique for the same hostfs superblock because multiple host's
(backed) superblocks may be used.

Delete inodes when dropping them to force backed host's file descriptors
closing.

This enables to entirely remove ARCH_EPHEMERAL_INODES, and then makes
Landlock fully supported by UML.  This is very useful for testing
changes.

These changes also factor out and simplify some helpers thanks to the
new hostfs_inode_update() and the hostfs_iget() revamp: read_name(),
hostfs_create(), hostfs_lookup(), hostfs_mknod(), and
hostfs_fill_sb_common().

A following commit with new Landlock tests check this new hostfs inode
consistency.

Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Richard Weinberger <richard@nod.at>
Link: https://lore.kernel.org/r/20230612191430.339153-2-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
2023-06-12 21:26:19 +02:00
Thomas Gleixner
18415f33e2 cpu/hotplug: Allow "parallel" bringup up to CPUHP_BP_KICK_AP_STATE
There is often significant latency in the early stages of CPU bringup, and
time is wasted by waking each CPU (e.g. with SIPI/INIT/INIT on x86) and
then waiting for it to respond before moving on to the next.

Allow a platform to enable parallel setup which brings all to be onlined
CPUs up to the CPUHP_BP_KICK_AP state. While this state advancement on the
control CPU (BP) is single-threaded the important part is the last state
CPUHP_BP_KICK_AP which wakes the to be onlined CPUs up.

This allows the CPUs to run up to the first sychronization point
cpuhp_ap_sync_alive() where they wait for the control CPU to release them
one by one for the full onlining procedure.

This parallelism depends on the CPU hotplug core sync mechanism which
ensures that the parallel brought up CPUs wait for release before touching
any state which would make the CPU visible to anything outside the hotplug
control mechanism.

To handle the SMT constraints of X86 correctly the bringup happens in two
iterations when CONFIG_HOTPLUG_SMT is enabled. The control CPU brings up
the primary SMT threads of each core first, which can load the microcode
without the need to rendevouz with the thread siblings. Once that's
completed it brings up the secondary SMT threads.

Co-developed-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Tested-by: Helge Deller <deller@gmx.de> # parisc
Tested-by: Guilherme G. Piccoli <gpiccoli@igalia.com> # Steam Deck
Link: https://lore.kernel.org/r/20230512205257.240231377@linutronix.de
2023-05-15 13:45:02 +02:00
Thomas Gleixner
a631be92b9 cpu/hotplug: Provide a split up CPUHP_BRINGUP mechanism
The bring up logic of a to be onlined CPU consists of several parts, which
are considered to be a single hotplug state:

  1) Control CPU issues the wake-up

  2) To be onlined CPU starts up, does the minimal initialization,
     reports to be alive and waits for release into the complete bring-up.

  3) Control CPU waits for the alive report and releases the upcoming CPU
     for the complete bring-up.

Allow to split this into two states:

  1) Control CPU issues the wake-up

     After that the to be onlined CPU starts up, does the minimal
     initialization, reports to be alive and waits for release into the
     full bring-up. As this can run after the control CPU dropped the
     hotplug locks the code which is executed on the AP before it reports
     alive has to be carefully audited to not violate any of the hotplug
     constraints, especially not modifying any of the various cpumasks.

     This is really only meant to avoid waiting for the AP to react on the
     wake-up. Of course an architecture can move strict CPU related setup
     functionality, e.g. microcode loading, with care before the
     synchronization point to save further pointless waiting time.

  2) Control CPU waits for the alive report and releases the upcoming CPU
     for the complete bring-up.

This allows that the two states can be split up to run all to be onlined
CPUs up to state #1 on the control CPU and then at a later point run state
#2. This spares some of the latencies of the full serialized per CPU
bringup by avoiding the per CPU wakeup/wait serialization. The assumption
is that the first AP already waits when the last AP has been woken up. This
obvioulsy depends on the hardware latencies and depending on the timings
this might still not completely eliminate all wait scenarios.

This split is just a preparatory step for enabling the parallel bringup
later. The boot time bringup is still fully serialized. It has a separate
config switch so that architectures which want to support parallel bringup
can test the split of the CPUHP_BRINGUG step separately.

To enable this the architecture must support the CPU hotplug core sync
mechanism and has to be audited that there are no implicit hotplug state
dependencies which require a fully serialized bringup.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Tested-by: Helge Deller <deller@gmx.de> # parisc
Tested-by: Guilherme G. Piccoli <gpiccoli@igalia.com> # Steam Deck
Link: https://lore.kernel.org/r/20230512205257.080801387@linutronix.de
2023-05-15 13:45:01 +02:00
Thomas Gleixner
6f0621238b cpu/hotplug: Add CPU state tracking and synchronization
The CPU state tracking and synchronization mechanism in smpboot.c is
completely independent of the hotplug code and all logic around it is
implemented in architecture specific code.

Except for the state reporting of the AP there is absolutely nothing
architecture specific and the sychronization and decision functions can be
moved into the generic hotplug core code.

Provide an integrated variant and add the core synchronization and decision
points. This comes in two flavours:

  1) DEAD state synchronization

     Updated by the architecture code once the AP reaches the point where
     it is ready to be torn down by the control CPU, e.g. by removing power
     or clocks or tear down via the hypervisor.

     The control CPU waits for this state to be reached with a timeout. If
     the state is reached an architecture specific cleanup function is
     invoked.

  2) Full state synchronization

     This extends #1 with AP alive synchronization. This is new
     functionality, which allows to replace architecture specific wait
     mechanims, e.g. cpumasks, completely.

     It also prevents that an AP which is in a limbo state can be brought
     up again. This can happen when an AP failed to report dead state
     during a previous off-line operation.

The dead synchronization is what most architectures use. Only x86 makes a
bringup decision based on that state at the moment.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Tested-by: Helge Deller <deller@gmx.de> # parisc
Tested-by: Guilherme G. Piccoli <gpiccoli@igalia.com> # Steam Deck
Link: https://lore.kernel.org/r/20230512205256.476305035@linutronix.de
2023-05-15 13:44:55 +02:00
Nicholas Piggin
2655421ae6 lazy tlb: shoot lazies, non-refcounting lazy tlb mm reference handling scheme
On big systems, the mm refcount can become highly contented when doing a
lot of context switching with threaded applications.  user<->idle switch
is one of the important cases.  Abandoning lazy tlb entirely slows this
switching down quite a bit in the common uncontended case, so that is not
viable.

Implement a scheme where lazy tlb mm references do not contribute to the
refcount, instead they get explicitly removed when the refcount reaches
zero.

The final mmdrop() sends IPIs to all CPUs in the mm_cpumask and they
switch away from this mm to init_mm if it was being used as the lazy tlb
mm.  Enabling the shoot lazies option therefore requires that the arch
ensures that mm_cpumask contains all CPUs that could possibly be using mm.
A DEBUG_VM option IPIs every CPU in the system after this to ensure there
are no references remaining before the mm is freed.

Shootdown IPIs cost could be an issue, but they have not been observed to
be a serious problem with this scheme, because short-lived processes tend
not to migrate CPUs much, therefore they don't get much chance to leave
lazy tlb mm references on remote CPUs.  There are a lot of options to
reduce them if necessary, described in comments.

The near-worst-case can be benchmarked with will-it-scale:

  context_switch1_threads -t $(($(nproc) / 2))

This will create nproc threads (nproc / 2 switching pairs) all sharing the
same mm that spread over all CPUs so each CPU does thread->idle->thread
switching.

[ Rik came up with basically the same idea a few years ago, so credit
  to him for that. ]

Link: https://lore.kernel.org/linux-mm/20230118080011.2258375-1-npiggin@gmail.com/
Link: https://lore.kernel.org/all/20180728215357.3249-11-riel@surriel.com/
Link: https://lkml.kernel.org/r/20230203071837.1136453-5-npiggin@gmail.com
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-03-28 16:20:08 -07:00
Nicholas Piggin
88e3009b52 lazy tlb: allow lazy tlb mm refcounting to be configurable
Add CONFIG_MMU_TLB_REFCOUNT which enables refcounting of the lazy tlb mm
when it is context switched.  This can be disabled by architectures that
don't require this refcounting if they clean up lazy tlb mms when the last
refcount is dropped.  Currently this is always enabled, so the patch
introduces no functional change.

Link: https://lkml.kernel.org/r/20230203071837.1136453-4-npiggin@gmail.com
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-03-28 16:20:08 -07:00
Juerg Haefliger
9f79ffc193 arch/Kconfig: fix indentation
The convention for indentation seems to be a single tab.  Help text is
further indented by an additional two whitespaces.  Fix the lines that
violate these rules.

Link: https://lkml.kernel.org/r/20230201162435.218368-1-juerg.haefliger@canonical.com
Signed-off-by: Juerg Haefliger <juerg.haefliger@canonical.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Dan Li <ashimida@linux.alibaba.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Juerg Haefliger <juerg.haefliger@canonical.com>
Cc: Marco Elver <elver@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sami Tolvanen <samitolvanen@google.com>
Cc: Tom Rix <trix@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-02-09 17:03:20 -08:00
Linus Torvalds
77856d911a arm64 fixes for -rc1
- Fix Kconfig dependencies to re-allow the enabling of function graph
   tracer and shadow call stacks at the same time.
 
 - Revert the workaround for CPU erratum #2645198 since the CONFIG_
   guards were incorrect and the code has therefore not seen any real
   exposure in -next.
 -----BEGIN PGP SIGNATURE-----
 
 iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmOcVWkQHHdpbGxAa2Vy
 bmVsLm9yZwAKCRC3rHDchMFjNF/7B/wIGicobLxXMMkuao+ipm5V/eLnVRuVt6WD
 T//5ZG+3Td3xON+mdt/byIm/Npl1I2l+NDjK9jIFcS5A/Q7DmwbcxJV+6BhRdb7o
 XQxkHsKR2DTbmbeqd0+AkZGJc4jk5D+vuyLeo8jcc6bSpQhepCOV5R5JVOadg9mg
 WxuITwsodI9GfQGmupggF6C31yMCYibmlD9WWNW8tNx8TBojU97pJbQaf1h3bC9i
 JE9CxBVYmt3Qg5BAB46EdH60lxELyHpEjJNvgvZZpFz4a/bBB47mG7Cy+ECldc5p
 LukJnAImydedwgQqgBD0e0HyXoIQ8r8NZ+yNgig2asQxA5DYsI1L
 =IZRW
 -----END PGP SIGNATURE-----

Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

Pull arm64 fixes from Will Deacon:

 - Fix Kconfig dependencies to re-allow the enabling of function graph
   tracer and shadow call stacks at the same time.

 - Revert the workaround for CPU erratum #2645198 since the CONFIG_
   guards were incorrect and the code has therefore not seen any real
   exposure in -next.

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  Revert "arm64: errata: Workaround possible Cortex-A715 [ESR|FAR]_ELx corruption"
  ftrace: Allow WITH_ARGS flavour of graph tracer with shadow call stack
2022-12-16 13:46:41 -06:00
Linus Torvalds
94a855111e - Add the call depth tracking mitigation for Retbleed which has
been long in the making. It is a lighterweight software-only fix for
 Skylake-based cores where enabling IBRS is a big hammer and causes a
 significant performance impact.
 
 What it basically does is, it aligns all kernel functions to 16 bytes
 boundary and adds a 16-byte padding before the function, objtool
 collects all functions' locations and when the mitigation gets applied,
 it patches a call accounting thunk which is used to track the call depth
 of the stack at any time.
 
 When that call depth reaches a magical, microarchitecture-specific value
 for the Return Stack Buffer, the code stuffs that RSB and avoids its
 underflow which could otherwise lead to the Intel variant of Retbleed.
 
 This software-only solution brings a lot of the lost performance back,
 as benchmarks suggest:
 
   https://lore.kernel.org/all/20220915111039.092790446@infradead.org/
 
 That page above also contains a lot more detailed explanation of the
 whole mechanism
 
 - Implement a new control flow integrity scheme called FineIBT which is
 based on the software kCFI implementation and uses hardware IBT support
 where present to annotate and track indirect branches using a hash to
 validate them
 
 - Other misc fixes and cleanups
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmOZp5EACgkQEsHwGGHe
 VUrZFxAAvi/+8L0IYSK4mKJvixGbTFjxN/Swo2JVOfs34LqGUT6JaBc+VUMwZxdb
 VMTFIZ3ttkKEodjhxGI7oGev6V8UfhI37SmO2lYKXpQVjXXnMlv/M+Vw3teE38CN
 gopi+xtGnT1IeWQ3tc/Tv18pleJ0mh5HKWiW+9KoqgXj0wgF9x4eRYDz1TDCDA/A
 iaBzs56j8m/FSykZHnrWZ/MvjKNPdGlfJASUCPeTM2dcrXQGJ93+X2hJctzDte0y
 Nuiw6Y0htfFBE7xoJn+sqm5Okr+McoUM18/CCprbgSKYk18iMYm3ZtAi6FUQZS1A
 ua4wQCf49loGp15PO61AS5d3OBf5D3q/WihQRbCaJvTVgPp9sWYnWwtcVUuhMllh
 ZQtBU9REcVJ/22bH09Q9CjBW0VpKpXHveqQdqRDViLJ6v/iI6EFGmD24SW/VxyRd
 73k9MBGrL/dOf1SbEzdsnvcSB3LGzp0Om8o/KzJWOomrVKjBCJy16bwTEsCZEJmP
 i406m92GPXeaN1GhTko7vmF0GnkEdJs1GVCZPluCAxxbhHukyxHnrjlQjI4vC80n
 Ylc0B3Kvitw7LGJsPqu+/jfNHADC/zhx1qz/30wb5cFmFbN1aRdp3pm8JYUkn+l/
 zri2Y6+O89gvE/9/xUhMohzHsWUO7xITiBavewKeTP9GSWybWUs=
 =cRy1
 -----END PGP SIGNATURE-----

Merge tag 'x86_core_for_v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 core updates from Borislav Petkov:

 - Add the call depth tracking mitigation for Retbleed which has been
   long in the making. It is a lighterweight software-only fix for
   Skylake-based cores where enabling IBRS is a big hammer and causes a
   significant performance impact.

   What it basically does is, it aligns all kernel functions to 16 bytes
   boundary and adds a 16-byte padding before the function, objtool
   collects all functions' locations and when the mitigation gets
   applied, it patches a call accounting thunk which is used to track
   the call depth of the stack at any time.

   When that call depth reaches a magical, microarchitecture-specific
   value for the Return Stack Buffer, the code stuffs that RSB and
   avoids its underflow which could otherwise lead to the Intel variant
   of Retbleed.

   This software-only solution brings a lot of the lost performance
   back, as benchmarks suggest:

       https://lore.kernel.org/all/20220915111039.092790446@infradead.org/

   That page above also contains a lot more detailed explanation of the
   whole mechanism

 - Implement a new control flow integrity scheme called FineIBT which is
   based on the software kCFI implementation and uses hardware IBT
   support where present to annotate and track indirect branches using a
   hash to validate them

 - Other misc fixes and cleanups

* tag 'x86_core_for_v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (80 commits)
  x86/paravirt: Use common macro for creating simple asm paravirt functions
  x86/paravirt: Remove clobber bitmask from .parainstructions
  x86/debug: Include percpu.h in debugreg.h to get DECLARE_PER_CPU() et al
  x86/cpufeatures: Move X86_FEATURE_CALL_DEPTH from bit 18 to bit 19 of word 11, to leave space for WIP X86_FEATURE_SGX_EDECCSSA bit
  x86/Kconfig: Enable kernel IBT by default
  x86,pm: Force out-of-line memcpy()
  objtool: Fix weak hole vs prefix symbol
  objtool: Optimize elf_dirty_reloc_sym()
  x86/cfi: Add boot time hash randomization
  x86/cfi: Boot time selection of CFI scheme
  x86/ibt: Implement FineIBT
  objtool: Add --cfi to generate the .cfi_sites section
  x86: Add prefix symbols for function padding
  objtool: Add option to generate prefix symbols
  objtool: Avoid O(bloody terrible) behaviour -- an ode to libelf
  objtool: Slice up elf_create_section_symbol()
  kallsyms: Revert "Take callthunks into account"
  x86: Unconfuse CONFIG_ and X86_FEATURE_ namespaces
  x86/retpoline: Fix crash printing warning
  x86/paravirt: Fix a !PARAVIRT build warning
  ...
2022-12-14 15:03:00 -08:00
Ard Biesheuvel
38792972de ftrace: Allow WITH_ARGS flavour of graph tracer with shadow call stack
The recent switch on arm64 from DYNAMIC_FTRACE_WITH_REGS to
DYNAMIC_FTRACE_WITH_ARGS failed to take into account that we currently
require the former in order to allow the function graph tracer to be
enabled in combination with shadow call stacks. This means that this is
no longer permitted at all, in spite of the fact that either flavour of
ftrace works perfectly fine in this combination.

So permit WITH_ARGS as well as WITH_REGS.

Fixes: ddc9863e9e ("scs: Disable when function graph tracing is enabled")
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20221213132407.1485025-1-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
2022-12-14 15:32:46 +00:00
Linus Torvalds
06cff4a58e arm64 updates for 6.2
ACPI:
 	* Enable FPDT support for boot-time profiling
 	* Fix CPU PMU probing to work better with PREEMPT_RT
 	* Update SMMUv3 MSI DeviceID parsing to latest IORT spec
 	* APMT support for probing Arm CoreSight PMU devices
 
 CPU features:
 	* Advertise new SVE instructions (v2.1)
 	* Advertise range prefetch instruction
 	* Advertise CSSC ("Common Short Sequence Compression") scalar
 	  instructions, adding things like min, max, abs, popcount
 	* Enable DIT (Data Independent Timing) when running in the kernel
 	* More conversion of system register fields over to the generated
 	  header
 
 CPU misfeatures:
 	* Workaround for Cortex-A715 erratum #2645198
 
 Dynamic SCS:
 	* Support for dynamic shadow call stacks to allow switching at
 	  runtime between Clang's SCS implementation and the CPU's
 	  pointer authentication feature when it is supported (complete
 	  with scary DWARF parser!)
 
 Tracing and debug:
 	* Remove static ftrace in favour of, err, dynamic ftrace!
 	* Seperate 'struct ftrace_regs' from 'struct pt_regs' in core
 	  ftrace and existing arch code
 	* Introduce and implement FTRACE_WITH_ARGS on arm64 to replace
 	  the old FTRACE_WITH_REGS
 	* Extend 'crashkernel=' parameter with default value and fallback
 	  to placement above 4G physical if initial (low) allocation
 	  fails
 
 SVE:
 	* Optimisation to avoid disabling SVE unconditionally on syscall
 	  entry and just zeroing the non-shared state on return instead
 
 Exceptions:
 	* Rework of undefined instruction handling to avoid serialisation
 	  on global lock (this includes emulation of user accesses to the
 	  ID registers)
 
 Perf and PMU:
 	* Support for TLP filters in Hisilicon's PCIe PMU device
 	* Support for the DDR PMU present in Amlogic Meson G12 SoCs
 	* Support for the terribly-named "CoreSight PMU" architecture
 	  from Arm (and Nvidia's implementation of said architecture)
 
 Misc:
 	* Tighten up our boot protocol for systems with memory above
           52 bits physical
 	* Const-ify static keys to satisty jump label asm constraints
 	* Trivial FFA driver cleanups in preparation for v1.1 support
 	* Export the kernel_neon_* APIs as GPL symbols
 	* Harden our instruction generation routines against
 	  instrumentation
 	* A bunch of robustness improvements to our arch-specific selftests
 	* Minor cleanups and fixes all over (kbuild, kprobes, kfence, PMU, ...)
 -----BEGIN PGP SIGNATURE-----
 
 iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmOPLFAQHHdpbGxAa2Vy
 bmVsLm9yZwAKCRC3rHDchMFjNPRcCACLyDTvkimiqfoPxzzgdkx/6QOvw9s3/mXg
 UcTORSZBR1VnYkiMYEKVz/tTfG99dnWtD8/0k/rz48NbhBfsF2sN4ukyBBXVf0zR
 fjnaVyVC11LUgBgZKPo6maV+jf/JWf9hJtpPl06KTiPb2Hw2JX4DXg+PeF8t2hGx
 NLH4ekQOrlDM8mlsN5mc0YsHbiuO7Xe/NRuet8TsgU4bEvLAwO6bzOLVUMqDQZNq
 bQe2ENcGVAzAf7iRJb38lj9qB/5hrQTHRXqLXMSnJyyVjQEwYca0PeJMa7x30bXF
 ZZ+xQ8Wq0mxiffZraf6SE34yD4gaYS4Fziw7rqvydC15vYhzJBH1
 =hV+2
 -----END PGP SIGNATURE-----

Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

Pull arm64 updates from Will Deacon:
 "The highlights this time are support for dynamically enabling and
  disabling Clang's Shadow Call Stack at boot and a long-awaited
  optimisation to the way in which we handle the SVE register state on
  system call entry to avoid taking unnecessary traps from userspace.

  Summary:

  ACPI:
   - Enable FPDT support for boot-time profiling
   - Fix CPU PMU probing to work better with PREEMPT_RT
   - Update SMMUv3 MSI DeviceID parsing to latest IORT spec
   - APMT support for probing Arm CoreSight PMU devices

  CPU features:
   - Advertise new SVE instructions (v2.1)
   - Advertise range prefetch instruction
   - Advertise CSSC ("Common Short Sequence Compression") scalar
     instructions, adding things like min, max, abs, popcount
   - Enable DIT (Data Independent Timing) when running in the kernel
   - More conversion of system register fields over to the generated
     header

  CPU misfeatures:
   - Workaround for Cortex-A715 erratum #2645198

  Dynamic SCS:
   - Support for dynamic shadow call stacks to allow switching at
     runtime between Clang's SCS implementation and the CPU's pointer
     authentication feature when it is supported (complete with scary
     DWARF parser!)

  Tracing and debug:
   - Remove static ftrace in favour of, err, dynamic ftrace!
   - Seperate 'struct ftrace_regs' from 'struct pt_regs' in core ftrace
     and existing arch code
   - Introduce and implement FTRACE_WITH_ARGS on arm64 to replace the
     old FTRACE_WITH_REGS
   - Extend 'crashkernel=' parameter with default value and fallback to
     placement above 4G physical if initial (low) allocation fails

  SVE:
   - Optimisation to avoid disabling SVE unconditionally on syscall
     entry and just zeroing the non-shared state on return instead

  Exceptions:
   - Rework of undefined instruction handling to avoid serialisation on
     global lock (this includes emulation of user accesses to the ID
     registers)

  Perf and PMU:
   - Support for TLP filters in Hisilicon's PCIe PMU device
   - Support for the DDR PMU present in Amlogic Meson G12 SoCs
   - Support for the terribly-named "CoreSight PMU" architecture from
     Arm (and Nvidia's implementation of said architecture)

  Misc:
   - Tighten up our boot protocol for systems with memory above 52 bits
     physical
   - Const-ify static keys to satisty jump label asm constraints
   - Trivial FFA driver cleanups in preparation for v1.1 support
   - Export the kernel_neon_* APIs as GPL symbols
   - Harden our instruction generation routines against instrumentation
   - A bunch of robustness improvements to our arch-specific selftests
   - Minor cleanups and fixes all over (kbuild, kprobes, kfence, PMU, ...)"

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (151 commits)
  arm64: kprobes: Return DBG_HOOK_ERROR if kprobes can not handle a BRK
  arm64: kprobes: Let arch do_page_fault() fix up page fault in user handler
  arm64: Prohibit instrumentation on arch_stack_walk()
  arm64:uprobe fix the uprobe SWBP_INSN in big-endian
  arm64: alternatives: add __init/__initconst to some functions/variables
  arm_pmu: Drop redundant armpmu->map_event() in armpmu_event_init()
  kselftest/arm64: Allow epoll_wait() to return more than one result
  kselftest/arm64: Don't drain output while spawning children
  kselftest/arm64: Hold fp-stress children until they're all spawned
  arm64/sysreg: Remove duplicate definitions from asm/sysreg.h
  arm64/sysreg: Convert ID_DFR1_EL1 to automatic generation
  arm64/sysreg: Convert ID_DFR0_EL1 to automatic generation
  arm64/sysreg: Convert ID_AFR0_EL1 to automatic generation
  arm64/sysreg: Convert ID_MMFR5_EL1 to automatic generation
  arm64/sysreg: Convert MVFR2_EL1 to automatic generation
  arm64/sysreg: Convert MVFR1_EL1 to automatic generation
  arm64/sysreg: Convert MVFR0_EL1 to automatic generation
  arm64/sysreg: Convert ID_PFR2_EL1 to automatic generation
  arm64/sysreg: Convert ID_PFR1_EL1 to automatic generation
  arm64/sysreg: Convert ID_PFR0_EL1 to automatic generation
  ...
2022-12-12 09:50:05 -08:00
Ard Biesheuvel
9beccca098 scs: add support for dynamic shadow call stacks
In order to allow arches to use code patching to conditionally emit the
shadow stack pushes and pops, rather than always taking the performance
hit even on CPUs that implement alternatives such as stack pointer
authentication on arm64, add a Kconfig symbol that can be set by the
arch to omit the SCS codegen itself, without otherwise affecting how
support code for SCS and compiler options (for register reservation, for
instance) are emitted.

Also, add a static key and some plumbing to omit the allocation of
shadow call stack for dynamic SCS configurations if SCS is disabled at
runtime.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://lore.kernel.org/r/20221027155908.1940624-3-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
2022-11-09 18:06:35 +00:00
Paul E. McKenney
2e83b879fb srcu: Create an srcu_read_lock_nmisafe() and srcu_read_unlock_nmisafe()
On strict load-store architectures, the use of this_cpu_inc() by
srcu_read_lock() and srcu_read_unlock() is not NMI-safe in TREE SRCU.
To see this suppose that an NMI arrives in the middle of srcu_read_lock(),
just after it has read ->srcu_lock_count, but before it has written
the incremented value back to memory.  If that NMI handler also does
srcu_read_lock() and srcu_read_lock() on that same srcu_struct structure,
then upon return from that NMI handler, the interrupted srcu_read_lock()
will overwrite the NMI handler's update to ->srcu_lock_count, but
leave unchanged the NMI handler's update by srcu_read_unlock() to
->srcu_unlock_count.

This can result in a too-short SRCU grace period, which can in turn
result in arbitrary memory corruption.

If the NMI handler instead interrupts the srcu_read_unlock(), this
can result in eternal SRCU grace periods, which is not much better.

This commit therefore creates a pair of new srcu_read_lock_nmisafe()
and srcu_read_unlock_nmisafe() functions, which allow SRCU readers in
both NMI handlers and in process and IRQ context.  It is bad practice
to mix the existing and the new _nmisafe() primitives on the same
srcu_struct structure.  Use one set or the other, not both.

Just to underline that "bad practice" point, using srcu_read_lock() at
process level and srcu_read_lock_nmisafe() in your NMI handler will not,
repeat NOT, work.  If you do not immediately understand why this is the
case, please review the earlier paragraphs in this commit log.

[ paulmck: Apply kernel test robot feedback. ]
[ paulmck: Apply feedback from Randy Dunlap. ]
[ paulmck: Apply feedback from John Ogness. ]
[ paulmck: Apply feedback from Frederic Weisbecker. ]

Link: https://lore.kernel.org/all/20220910221947.171557773@linutronix.de/

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Petr Mladek <pmladek@suse.com>
2022-10-20 14:39:18 -07:00
Peter Zijlstra
d49a062621 arch: Introduce CONFIG_FUNCTION_ALIGNMENT
Generic function-alignment infrastructure.

Architectures can select FUNCTION_ALIGNMENT_xxB symbols; the
FUNCTION_ALIGNMENT symbol is then set to the largest such selected
size, 0 otherwise.

From this the -falign-functions compiler argument and __ALIGN macro
are set.

This incorporates the DEBUG_FORCE_FUNCTION_ALIGN_64B knob and future
alignment requirements for x86_64 (later in this series) into a single
place.

NOTE: also removes the 0x90 filler byte from the generic __ALIGN
      primitive, that value makes no sense outside of x86.

NOTE: .balign 0 reverts to a no-op.

Requested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220915111143.719248727@infradead.org
2022-10-17 16:40:58 +02:00
Linus Torvalds
27bc50fc90 - Yu Zhao's Multi-Gen LRU patches are here. They've been under test in
linux-next for a couple of months without, to my knowledge, any negative
   reports (or any positive ones, come to that).
 
 - Also the Maple Tree from Liam R.  Howlett.  An overlapping range-based
   tree for vmas.  It it apparently slight more efficient in its own right,
   but is mainly targeted at enabling work to reduce mmap_lock contention.
 
   Liam has identified a number of other tree users in the kernel which
   could be beneficially onverted to mapletrees.
 
   Yu Zhao has identified a hard-to-hit but "easy to fix" lockdep splat
   (https://lkml.kernel.org/r/CAOUHufZabH85CeUN-MEMgL8gJGzJEWUrkiM58JkTbBhh-jew0Q@mail.gmail.com).
   This has yet to be addressed due to Liam's unfortunately timed
   vacation.  He is now back and we'll get this fixed up.
 
 - Dmitry Vyukov introduces KMSAN: the Kernel Memory Sanitizer.  It uses
   clang-generated instrumentation to detect used-unintialized bugs down to
   the single bit level.
 
   KMSAN keeps finding bugs.  New ones, as well as the legacy ones.
 
 - Yang Shi adds a userspace mechanism (madvise) to induce a collapse of
   memory into THPs.
 
 - Zach O'Keefe has expanded Yang Shi's madvise(MADV_COLLAPSE) to support
   file/shmem-backed pages.
 
 - userfaultfd updates from Axel Rasmussen
 
 - zsmalloc cleanups from Alexey Romanov
 
 - cleanups from Miaohe Lin: vmscan, hugetlb_cgroup, hugetlb and memory-failure
 
 - Huang Ying adds enhancements to NUMA balancing memory tiering mode's
   page promotion, with a new way of detecting hot pages.
 
 - memcg updates from Shakeel Butt: charging optimizations and reduced
   memory consumption.
 
 - memcg cleanups from Kairui Song.
 
 - memcg fixes and cleanups from Johannes Weiner.
 
 - Vishal Moola provides more folio conversions
 
 - Zhang Yi removed ll_rw_block() :(
 
 - migration enhancements from Peter Xu
 
 - migration error-path bugfixes from Huang Ying
 
 - Aneesh Kumar added ability for a device driver to alter the memory
   tiering promotion paths.  For optimizations by PMEM drivers, DRM
   drivers, etc.
 
 - vma merging improvements from Jakub Matěn.
 
 - NUMA hinting cleanups from David Hildenbrand.
 
 - xu xin added aditional userspace visibility into KSM merging activity.
 
 - THP & KSM code consolidation from Qi Zheng.
 
 - more folio work from Matthew Wilcox.
 
 - KASAN updates from Andrey Konovalov.
 
 - DAMON cleanups from Kaixu Xia.
 
 - DAMON work from SeongJae Park: fixes, cleanups.
 
 - hugetlb sysfs cleanups from Muchun Song.
 
 - Mike Kravetz fixes locking issues in hugetlbfs and in hugetlb core.
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCY0HaPgAKCRDdBJ7gKXxA
 joPjAQDZ5LlRCMWZ1oxLP2NOTp6nm63q9PWcGnmY50FjD/dNlwEAnx7OejCLWGWf
 bbTuk6U2+TKgJa4X7+pbbejeoqnt5QU=
 =xfWx
 -----END PGP SIGNATURE-----

Merge tag 'mm-stable-2022-10-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull MM updates from Andrew Morton:

 - Yu Zhao's Multi-Gen LRU patches are here. They've been under test in
   linux-next for a couple of months without, to my knowledge, any
   negative reports (or any positive ones, come to that).

 - Also the Maple Tree from Liam Howlett. An overlapping range-based
   tree for vmas. It it apparently slightly more efficient in its own
   right, but is mainly targeted at enabling work to reduce mmap_lock
   contention.

   Liam has identified a number of other tree users in the kernel which
   could be beneficially onverted to mapletrees.

   Yu Zhao has identified a hard-to-hit but "easy to fix" lockdep splat
   at [1]. This has yet to be addressed due to Liam's unfortunately
   timed vacation. He is now back and we'll get this fixed up.

 - Dmitry Vyukov introduces KMSAN: the Kernel Memory Sanitizer. It uses
   clang-generated instrumentation to detect used-unintialized bugs down
   to the single bit level.

   KMSAN keeps finding bugs. New ones, as well as the legacy ones.

 - Yang Shi adds a userspace mechanism (madvise) to induce a collapse of
   memory into THPs.

 - Zach O'Keefe has expanded Yang Shi's madvise(MADV_COLLAPSE) to
   support file/shmem-backed pages.

 - userfaultfd updates from Axel Rasmussen

 - zsmalloc cleanups from Alexey Romanov

 - cleanups from Miaohe Lin: vmscan, hugetlb_cgroup, hugetlb and
   memory-failure

 - Huang Ying adds enhancements to NUMA balancing memory tiering mode's
   page promotion, with a new way of detecting hot pages.

 - memcg updates from Shakeel Butt: charging optimizations and reduced
   memory consumption.

 - memcg cleanups from Kairui Song.

 - memcg fixes and cleanups from Johannes Weiner.

 - Vishal Moola provides more folio conversions

 - Zhang Yi removed ll_rw_block() :(

 - migration enhancements from Peter Xu

 - migration error-path bugfixes from Huang Ying

 - Aneesh Kumar added ability for a device driver to alter the memory
   tiering promotion paths. For optimizations by PMEM drivers, DRM
   drivers, etc.

 - vma merging improvements from Jakub Matěn.

 - NUMA hinting cleanups from David Hildenbrand.

 - xu xin added aditional userspace visibility into KSM merging
   activity.

 - THP & KSM code consolidation from Qi Zheng.

 - more folio work from Matthew Wilcox.

 - KASAN updates from Andrey Konovalov.

 - DAMON cleanups from Kaixu Xia.

 - DAMON work from SeongJae Park: fixes, cleanups.

 - hugetlb sysfs cleanups from Muchun Song.

 - Mike Kravetz fixes locking issues in hugetlbfs and in hugetlb core.

Link: https://lkml.kernel.org/r/CAOUHufZabH85CeUN-MEMgL8gJGzJEWUrkiM58JkTbBhh-jew0Q@mail.gmail.com [1]

* tag 'mm-stable-2022-10-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (555 commits)
  hugetlb: allocate vma lock for all sharable vmas
  hugetlb: take hugetlb vma_lock when clearing vma_lock->vma pointer
  hugetlb: fix vma lock handling during split vma and range unmapping
  mglru: mm/vmscan.c: fix imprecise comments
  mm/mglru: don't sync disk for each aging cycle
  mm: memcontrol: drop dead CONFIG_MEMCG_SWAP config symbol
  mm: memcontrol: use do_memsw_account() in a few more places
  mm: memcontrol: deprecate swapaccounting=0 mode
  mm: memcontrol: don't allocate cgroup swap arrays when memcg is disabled
  mm/secretmem: remove reduntant return value
  mm/hugetlb: add available_huge_pages() func
  mm: remove unused inline functions from include/linux/mm_inline.h
  selftests/vm: add selftest for MADV_COLLAPSE of uffd-minor memory
  selftests/vm: add file/shmem MADV_COLLAPSE selftest for cleared pmd
  selftests/vm: add thp collapse shmem testing
  selftests/vm: add thp collapse file and tmpfs testing
  selftests/vm: modularize thp collapse memory operations
  selftests/vm: dedup THP helpers
  mm/khugepaged: add tracepoint to hpage_collapse_scan_file()
  mm/madvise: add file and shmem support to MADV_COLLAPSE
  ...
2022-10-10 17:53:04 -07:00
Linus Torvalds
865dad2022 kcfi updates for v6.1-rc1
This replaces the prior support for Clang's standard Control Flow
 Integrity (CFI) instrumentation, which has required a lot of special
 conditions (e.g. LTO) and work-arounds. The current implementation
 ("Kernel CFI") is specific to C, directly designed for the Linux kernel,
 and takes advantage of architectural features like x86's IBT. This
 series retains arm64 support and adds x86 support. Additional "generic"
 architectural support is expected soon:
 https://github.com/samitolvanen/llvm-project/commits/kcfi_generic
 
 - treewide: Remove old CFI support details
 
 - arm64: Replace Clang CFI support with Clang KCFI support
 
 - x86: Introduce Clang KCFI support
 -----BEGIN PGP SIGNATURE-----
 
 iQJKBAABCgA0FiEEpcP2jyKd1g9yPm4TiXL039xtwCYFAmM4aAUWHGtlZXNjb29r
 QGNocm9taXVtLm9yZwAKCRCJcvTf3G3AJkgWD/4mUgb7xewNIG/+fuipGd620Iao
 K0T8q4BNxLNRltOxNc3Q0WMDCggX0qJGCeds7EdFQJQOGxWcbifM8MAS4idAGM0G
 fc3Gxl1imC/oF6goCAbQgndA6jYFIWXGsv8LsRjAXRidWLFr3GFAqVqYJyokSySr
 8zMQsEDuF4I1gQnOhEWdtPZbV3MQ4ZjfFzpv+33agbq6Gb72vKvDh3G6g2VXlxjt
 1qnMtS+eEpbBU65cJkOi4MSLgymWbnIAeTMb0dbsV4kJ08YoTl8uz1B+weeH6GgT
 WP73ZJ4nqh1kkkT9EqS9oKozNB9fObhvCokEuAjuQ7i1eCEZsbShvRc0iL7OKTGG
 UfuTJa5qQ4h7Z0JS35FCSJETa+fcG0lTyEd133nLXLMZP9K2antf+A6O//fd0J1V
 Jg4VN7DQmZ+UNGOzRkL6dTtQUy4PkxhniIloaClfSYXxhNirA+v//sHTnTK3z2Bl
 6qceYqmFmns2Laual7+lvnZgt6egMBcmAL/MOdbU74+KIR9Xw76wxQjifktHX+WF
 FEUQkUJDB5XcUyKlbvHoqobRMxvEZ8RIlC5DIkgFiPRE3TI0MqfzNSFnQ/6+lFNg
 Y0AS9HYJmcj8sVzAJ7ji24WPFCXzsbFn6baJa9usDNbWyQZokYeiv7ZPNPHPDVrv
 YEBP6aYko0lVSUS9qw==
 =Li4D
 -----END PGP SIGNATURE-----

Merge tag 'kcfi-v6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux

Pull kcfi updates from Kees Cook:
 "This replaces the prior support for Clang's standard Control Flow
  Integrity (CFI) instrumentation, which has required a lot of special
  conditions (e.g. LTO) and work-arounds.

  The new implementation ("Kernel CFI") is specific to C, directly
  designed for the Linux kernel, and takes advantage of architectural
  features like x86's IBT. This series retains arm64 support and adds
  x86 support.

  GCC support is expected in the future[1], and additional "generic"
  architectural support is expected soon[2].

  Summary:

   - treewide: Remove old CFI support details

   - arm64: Replace Clang CFI support with Clang KCFI support

   - x86: Introduce Clang KCFI support"

Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=107048 [1]
Link: https://github.com/samitolvanen/llvm-project/commits/kcfi_generic [2]

* tag 'kcfi-v6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (22 commits)
  x86: Add support for CONFIG_CFI_CLANG
  x86/purgatory: Disable CFI
  x86: Add types to indirectly called assembly functions
  x86/tools/relocs: Ignore __kcfi_typeid_ relocations
  kallsyms: Drop CONFIG_CFI_CLANG workarounds
  objtool: Disable CFI warnings
  objtool: Preserve special st_shndx indexes in elf_update_symbol
  treewide: Drop __cficanonical
  treewide: Drop WARN_ON_FUNCTION_MISMATCH
  treewide: Drop function_nocfi
  init: Drop __nocfi from __init
  arm64: Drop unneeded __nocfi attributes
  arm64: Add CFI error handling
  arm64: Add types to indirect called assembly functions
  psci: Fix the function type for psci_initcall_t
  lkdtm: Emit an indirect call for CFI tests
  cfi: Add type helper macros
  cfi: Switch to -fsanitize=kcfi
  cfi: Drop __CFI_ADDRESSABLE
  cfi: Remove CONFIG_CFI_CLANG_SHADOW
  ...
2022-10-03 17:11:07 -07:00
Miguel Ojeda
2f7ab1267d Kbuild: add Rust support
Having most of the new files in place, we now enable Rust support
in the build system, including `Kconfig` entries related to Rust,
the Rust configuration printer and a few other bits.

Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Co-developed-by: Alex Gaynor <alex.gaynor@gmail.com>
Signed-off-by: Alex Gaynor <alex.gaynor@gmail.com>
Co-developed-by: Finn Behrens <me@kloenk.de>
Signed-off-by: Finn Behrens <me@kloenk.de>
Co-developed-by: Adam Bratschi-Kaye <ark.email@gmail.com>
Signed-off-by: Adam Bratschi-Kaye <ark.email@gmail.com>
Co-developed-by: Wedson Almeida Filho <wedsonaf@google.com>
Signed-off-by: Wedson Almeida Filho <wedsonaf@google.com>
Co-developed-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Co-developed-by: Sven Van Asbroeck <thesven73@gmail.com>
Signed-off-by: Sven Van Asbroeck <thesven73@gmail.com>
Co-developed-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Gary Guo <gary@garyguo.net>
Co-developed-by: Boris-Chengbiao Zhou <bobo1239@web.de>
Signed-off-by: Boris-Chengbiao Zhou <bobo1239@web.de>
Co-developed-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Co-developed-by: Douglas Su <d0u9.su@outlook.com>
Signed-off-by: Douglas Su <d0u9.su@outlook.com>
Co-developed-by: Dariusz Sosnowski <dsosnowski@dsosnowski.pl>
Signed-off-by: Dariusz Sosnowski <dsosnowski@dsosnowski.pl>
Co-developed-by: Antonio Terceiro <antonio.terceiro@linaro.org>
Signed-off-by: Antonio Terceiro <antonio.terceiro@linaro.org>
Co-developed-by: Daniel Xu <dxu@dxuuu.xyz>
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Co-developed-by: Björn Roy Baron <bjorn3_gh@protonmail.com>
Signed-off-by: Björn Roy Baron <bjorn3_gh@protonmail.com>
Co-developed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Signed-off-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2022-09-28 09:02:20 +02:00
Yu Zhao
eed9a328aa mm: x86: add CONFIG_ARCH_HAS_NONLEAF_PMD_YOUNG
Some architectures support the accessed bit in non-leaf PMD entries, e.g.,
x86 sets the accessed bit in a non-leaf PMD entry when using it as part of
linear address translation [1].  Page table walkers that clear the
accessed bit may use this capability to reduce their search space.

Note that:
1. Although an inline function is preferable, this capability is added
   as a configuration option for consistency with the existing macros.
2. Due to the little interest in other varieties, this capability was
   only tested on Intel and AMD CPUs.

Thanks to the following developers for their efforts [2][3].
  Randy Dunlap <rdunlap@infradead.org>
  Stephen Rothwell <sfr@canb.auug.org.au>

[1]: Intel 64 and IA-32 Architectures Software Developer's Manual
     Volume 3 (June 2021), section 4.8
[2] https://lore.kernel.org/r/bfdcc7c8-922f-61a9-aa15-7e7250f04af7@infradead.org/
[3] https://lore.kernel.org/r/20220413151513.5a0d7a7e@canb.auug.org.au/

Link: https://lkml.kernel.org/r/20220918080010.2920238-3-yuzhao@google.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Reviewed-by: Barry Song <baohua@kernel.org>
Acked-by: Brian Geffon <bgeffon@google.com>
Acked-by: Jan Alexander Steffens (heftig) <heftig@archlinux.org>
Acked-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Acked-by: Steven Barrett <steven@liquorix.net>
Acked-by: Suleiman Souhlal <suleiman@google.com>
Tested-by: Daniel Byrne <djbyrne@mtu.edu>
Tested-by: Donald Carr <d@chaos-reins.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Tested-by: Konstantin Kharlamov <Hi-Angel@yandex.ru>
Tested-by: Shuang Zhai <szhai2@cs.rochester.edu>
Tested-by: Sofia Trinh <sofia.trinh@edi.works>
Tested-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michael Larabel <Michael@MichaelLarabel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-09-26 19:46:08 -07:00
Sami Tolvanen
8924560094 cfi: Switch to -fsanitize=kcfi
Switch from Clang's original forward-edge control-flow integrity
implementation to -fsanitize=kcfi, which is better suited for the
kernel, as it doesn't require LTO, doesn't use a jump table that
requires altering function references, and won't break cross-module
function address equality.

Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Kees Cook <keescook@chromium.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220908215504.3686827-6-samitolvanen@google.com
2022-09-26 10:13:13 -07:00
Sami Tolvanen
9fca711582 cfi: Remove CONFIG_CFI_CLANG_SHADOW
In preparation to switching to -fsanitize=kcfi, remove support for the
CFI module shadow that will no longer be needed.

Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Kees Cook <keescook@chromium.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220908215504.3686827-4-samitolvanen@google.com
2022-09-26 10:13:12 -07:00
Sebastian Andrzej Siewior
8cbb2b50ee asm-generic: Conditionally enable do_softirq_own_stack() via Kconfig.
Remove the CONFIG_PREEMPT_RT symbol from the ifdef around
do_softirq_own_stack() and move it to Kconfig instead.

Enable softirq stacks based on SOFTIRQ_ON_OWN_STACK which depends on
HAVE_SOFTIRQ_ON_OWN_STACK and its default value is set to !PREEMPT_RT.
This ensures that softirq stacks are not used on PREEMPT_RT and avoids
a 'select' statement on an option which has a 'depends' statement.

Link: https://lore.kernel.org/YvN5E%2FPrHfUhggr7@linutronix.de
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-09-05 17:20:55 +02:00
Nick Desaulniers
a0a12c3ed0 asm goto: eradicate CC_HAS_ASM_GOTO
GCC has supported asm goto since 4.5, and Clang has since version 9.0.0.
The minimum supported versions of these tools for the build according to
Documentation/process/changes.rst are 5.1 and 11.0.0 respectively.

Remove the feature detection script, Kconfig option, and clean up some
fallback code that is no longer supported.

The removed script was also testing for a GCC specific bug that was
fixed in the 4.7 release.

Also remove workarounds for bpftrace using clang older than 9.0.0, since
other BPF backend fixes are required at this point.

Link: https://lore.kernel.org/lkml/CAK7LNATSr=BXKfkdW8f-H5VT_w=xBpT2ZQcZ7rm6JfkdE+QnmA@mail.gmail.com/
Link: http://gcc.gnu.org/bugzilla/show_bug.cgi?id=48637
Acked-by: Borislav Petkov <bp@suse.de>
Suggested-by: Masahiro Yamada <masahiroy@kernel.org>
Suggested-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-08-21 10:06:28 -07:00
Linus Torvalds
3bd6e5854b asm-generic: updates for 6.0
There are three independent sets of changes:
 
  - Sai Prakash Ranjan adds tracing support to the asm-generic
    version of the MMIO accessors, which is intended to help
    understand problems with device drivers and has been part
    of Qualcomm's vendor kernels for many years.
 
  - A patch from Sebastian Siewior to rework the handling of
    IRQ stacks in softirqs across architectures, which is
    needed for enabling PREEMPT_RT.
 
  - The last patch to remove the CONFIG_VIRT_TO_BUS option and
    some of the code behind that, after the last users of this
    old interface made it in through the netdev, scsi, media and
    staging trees.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmLqPPEACgkQmmx57+YA
 GNlUbQ/+NpIsiA0JUrCGtySt8KrLHdA2dH9lJOR5/iuxfphscPFfWtpcPvcXQWmt
 a8u7wyI8SHW1ku4U0Y5sO0dBSldDnoIqJ5t4X5d7YNU9yVtEtucqQhZf+GkrPlVD
 1HkRu05B7y0k2BMn7BLhSvkpafs3f1lNGXjs8oFBdOF1/zwp/GjcrfCK7KFzqjwU
 dYrX0SOFlKFd4BZC75VfK+XcKg4LtwIOmJraRRl7alz2Q5Oop2hgjgZxXDPf//vn
 SPOhXJN/97i1FUpY2TkfHVH1NxbPfjCV4pUnjmLG0Y4NSy9UQ/ZcXHcywIdeuhfa
 0LySOIsAqBeccpYYYdg2ubiMDZOXkBfANu/sB9o/EhoHfB4svrbPRDhBIQZMFXJr
 MJYu+IYce2rvydA/nydo4q++pxR8v1ES1ZIo8bDux+q1CI/zbpQV+f98kPVRA0M7
 ajc+5GTIqNIsvHzzadq7eYxcj5Bi8Li2JA9sVkAQ+6iq1TVyeYayMc9eYwONlmqw
 MD+PFYc651pKtXZCfkLXPIKSwS0uPqBndAibuVhpZ0hxWaCBBdKvY9mrWcPxt0kA
 tMR8lrosbbrV2K48BFdWTOHvCs2FhHQxPGVPZ/iWuxTA0hHZ9tUlaEkSX+VM57IU
 KCYQLdWzT8J9vrgqSbgYKlb6pSPz6FIjTfut6NZMmshIbavHV/Q=
 =aTR0
 -----END PGP SIGNATURE-----

Merge tag 'asm-generic-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic

Pull asm-generic updates from Arnd Bergmann:
 "There are three independent sets of changes:

   - Sai Prakash Ranjan adds tracing support to the asm-generic version
     of the MMIO accessors, which is intended to help understand
     problems with device drivers and has been part of Qualcomm's vendor
     kernels for many years

   - A patch from Sebastian Siewior to rework the handling of IRQ stacks
     in softirqs across architectures, which is needed for enabling
     PREEMPT_RT

   - The last patch to remove the CONFIG_VIRT_TO_BUS option and some of
     the code behind that, after the last users of this old interface
     made it in through the netdev, scsi, media and staging trees"

* tag 'asm-generic-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  uapi: asm-generic: fcntl: Fix typo 'the the' in comment
  arch/*/: remove CONFIG_VIRT_TO_BUS
  soc: qcom: geni: Disable MMIO tracing for GENI SE
  serial: qcom_geni_serial: Disable MMIO tracing for geni serial
  asm-generic/io: Add logging support for MMIO accessors
  KVM: arm64: Add a flag to disable MMIO trace for nVHE KVM
  lib: Add register read/write tracing support
  drm/meson: Fix overflow implicit truncation warnings
  irqchip/tegra: Fix overflow implicit truncation warnings
  coresight: etm4x: Use asm-generic IO memory barriers
  arm64: io: Use asm-generic high level MMIO accessors
  arch/*: Disable softirq stacks on PREEMPT_RT.
2022-08-05 10:07:23 -07:00
Linus Torvalds
7d9d077c78 RCU pull request for v5.20 (or whatever)
This pull request contains the following branches:
 
 doc.2022.06.21a: Documentation updates.
 
 fixes.2022.07.19a: Miscellaneous fixes.
 
 nocb.2022.07.19a: Callback-offload updates, perhaps most notably a new
 	RCU_NOCB_CPU_DEFAULT_ALL Kconfig option that causes all CPUs to
 	be offloaded at boot time, regardless of kernel boot parameters.
 	This is useful to battery-powered systems such as ChromeOS
 	and Android.  In addition, a new RCU_NOCB_CPU_CB_BOOST kernel
 	boot parameter prevents offloaded callbacks from interfering
 	with real-time workloads and with energy-efficiency mechanisms.
 
 poll.2022.07.21a: Polled grace-period updates, perhaps most notably
 	making these APIs account for both normal and expedited grace
 	periods.
 
 rcu-tasks.2022.06.21a: Tasks RCU updates, perhaps most notably reducing
 	the CPU overhead of RCU tasks trace grace periods by more than
 	a factor of two on a system with 15,000 tasks.	The reduction
 	is expected to increase with the number of tasks, so it seems
 	reasonable to hypothesize that a system with 150,000 tasks might
 	see a 20-fold reduction in CPU overhead.
 
 torture.2022.06.21a: Torture-test updates.
 
 ctxt.2022.07.05a: Updates that merge RCU's dyntick-idle tracking into
 	context tracking, thus reducing the overhead of transitioning to
 	kernel mode from either idle or nohz_full userspace execution
 	for kernels that track context independently of RCU.  This is
 	expected to be helpful primarily for kernels built with
 	CONFIG_NO_HZ_FULL=y.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEbK7UrM+RBIrCoViJnr8S83LZ+4wFAmLgMcgTHHBhdWxtY2tA
 a2VybmVsLm9yZwAKCRCevxLzctn7jArXD/0fjbCwqpRjHVTzjMY8jN4zDkqZZD6m
 g8Fx27hZ4ToNFwRptyHwNezrNj14skjAJEXfdjaVw32W62ivXvf0HINvSzsTLCSq
 k2kWyBdXLc9CwY5p5W4smnpn5VoAScjg5PoPL59INoZ/Zziji323C7Zepl/1DYJt
 0T6bPCQjo1ZQoDUCyVpSjDmAqxnderWG0MeJVt74GkLqmnYLANg0GH8c7mH4+9LL
 kVGlLp5nlPgNJ4FEoFdMwNU8T/ETmaVld/m2dkiawjkXjJzB2XKtBigU91DDmXz5
 7DIdV4ABrxiy4kGNqtIe/jFgnKyVD7xiDpyfjd6KTeDr/rDS8u2ZH7+1iHsyz3g0
 Np/tS3vcd0KR+gI/d0eXxPbgm5sKlCmKw/nU2eArpW/+4LmVXBUfHTG9Jg+LJmBc
 JrUh6aEdIZJZHgv/nOQBNig7GJW43IG50rjuJxAuzcxiZNEG5lUSS23ysaA9CPCL
 PxRWKSxIEfK3kdmvVO5IIbKTQmIBGWlcWMTcYictFSVfBgcCXpPAksGvqA5JiUkc
 egW+xLFo/7K+E158vSKsVqlWZcEeUbsNJ88QOlpqnRgH++I2Yv/LhK41XfJfpH+Y
 ALxVaDd+mAq6v+qSHNVq9wT3ozXIPy/zK1hDlMIqx40h2YvaEsH4je+521oSoN9r
 vX60+QNxvUBLwA==
 =vUNm
 -----END PGP SIGNATURE-----

Merge tag 'rcu.2022.07.26a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu

Pull RCU updates from Paul McKenney:

 - Documentation updates

 - Miscellaneous fixes

 - Callback-offload updates, perhaps most notably a new
   RCU_NOCB_CPU_DEFAULT_ALL Kconfig option that causes all CPUs to be
   offloaded at boot time, regardless of kernel boot parameters.

   This is useful to battery-powered systems such as ChromeOS and
   Android. In addition, a new RCU_NOCB_CPU_CB_BOOST kernel boot
   parameter prevents offloaded callbacks from interfering with
   real-time workloads and with energy-efficiency mechanisms

 - Polled grace-period updates, perhaps most notably making these APIs
   account for both normal and expedited grace periods

 - Tasks RCU updates, perhaps most notably reducing the CPU overhead of
   RCU tasks trace grace periods by more than a factor of two on a
   system with 15,000 tasks.

   The reduction is expected to increase with the number of tasks, so it
   seems reasonable to hypothesize that a system with 150,000 tasks
   might see a 20-fold reduction in CPU overhead

 - Torture-test updates

 - Updates that merge RCU's dyntick-idle tracking into context tracking,
   thus reducing the overhead of transitioning to kernel mode from
   either idle or nohz_full userspace execution for kernels that track
   context independently of RCU.

   This is expected to be helpful primarily for kernels built with
   CONFIG_NO_HZ_FULL=y

* tag 'rcu.2022.07.26a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (98 commits)
  rcu: Add irqs-disabled indicator to expedited RCU CPU stall warnings
  rcu: Diagnose extended sync_rcu_do_polled_gp() loops
  rcu: Put panic_on_rcu_stall() after expedited RCU CPU stall warnings
  rcutorture: Test polled expedited grace-period primitives
  rcu: Add polled expedited grace-period primitives
  rcutorture: Verify that polled GP API sees synchronous grace periods
  rcu: Make Tiny RCU grace periods visible to polled APIs
  rcu: Make polled grace-period API account for expedited grace periods
  rcu: Switch polled grace-period APIs to ->gp_seq_polled
  rcu/nocb: Avoid polling when my_rdp->nocb_head_rdp list is empty
  rcu/nocb: Add option to opt rcuo kthreads out of RT priority
  rcu: Add nocb_cb_kthread check to rcu_is_callbacks_kthread()
  rcu/nocb: Add an option to offload all CPUs on boot
  rcu/nocb: Fix NOCB kthreads spawn failure with rcu_nocb_rdp_deoffload() direct call
  rcu/nocb: Invert rcu_state.barrier_mutex VS hotplug lock locking order
  rcu/nocb: Add/del rdp to iterate from rcuog itself
  rcu/tree: Add comment to describe GP-done condition in fqs loop
  rcu: Initialize first_gp_fqs at declaration in rcu_gp_fqs()
  rcu/kvfree: Remove useless monitor_todo flag
  rcu: Cleanup RCU urgency state for offline CPU
  ...
2022-08-02 19:12:45 -07:00
Linus Torvalds
0cec3f24a7 arm64 updates for 5.20
- Remove unused generic cpuidle support (replaced by PSCI version)
 
 - Fix documentation describing the kernel virtual address space
 
 - Handling of some new CPU errata in Arm implementations
 
 - Rework of our exception table code in preparation for handling
   machine checks (i.e. RAS errors) more gracefully
 
 - Switch over to the generic implementation of ioremap()
 
 - Fix lockdep tracking in NMI context
 
 - Instrument our memory barrier macros for KCSAN
 
 - Rework of the kPTI G->nG page-table repainting so that the MMU remains
   enabled and the boot time is no longer slowed to a crawl for systems
   which require the late remapping
 
 - Enable support for direct swapping of 2MiB transparent huge-pages on
   systems without MTE
 
 - Fix handling of MTE tags with allocating new pages with HW KASAN
 
 - Expose the SMIDR register to userspace via sysfs
 
 - Continued rework of the stack unwinder, particularly improving the
   behaviour under KASAN
 
 - More repainting of our system register definitions to match the
   architectural terminology
 
 - Improvements to the layout of the vDSO objects
 
 - Support for allocating additional bits of HWCAP2 and exposing
   FEAT_EBF16 to userspace on CPUs that support it
 
 - Considerable rework and optimisation of our early boot code to reduce
   the need for cache maintenance and avoid jumping in and out of the
   kernel when handling relocation under KASLR
 
 - Support for disabling SVE and SME support on the kernel command-line
 
 - Support for the Hisilicon HNS3 PMU
 
 - Miscellanous cleanups, trivial updates and minor fixes
 -----BEGIN PGP SIGNATURE-----
 
 iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmLeccUQHHdpbGxAa2Vy
 bmVsLm9yZwAKCRC3rHDchMFjNCysB/4ml92RJLhVwRAofbtFfVgVz3JLTSsvob9x
 Z7FhNDxfM/G32wKtOHU9tHkGJ+PMVWOPajukzxkMhxmilfTyHBbiisNWVRjKQxj4
 wrd07DNXPIv3bi8SWzS1y2y8ZqujZWjNJlX8SUCzEoxCVtuNKwrh96kU1jUjrkFZ
 kBo4E4wBWK/qW29nClGSCgIHRQNJaB/jvITlQhkqIb0pwNf3sAUzW7QoF1iTZWhs
 UswcLh/zC4q79k9poegdCt8chV5OBDLtLPnMxkyQFvsLYRp3qhyCSQQY/BxvO5JS
 jT9QR6d+1ewET9BFhqHlIIuOTYBCk3xn/PR9AucUl+ZBQd2tO4B1
 =LVH0
 -----END PGP SIGNATURE-----

Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

Pull arm64 updates from Will Deacon:
 "Highlights include a major rework of our kPTI page-table rewriting
  code (which makes it both more maintainable and considerably faster in
  the cases where it is required) as well as significant changes to our
  early boot code to reduce the need for data cache maintenance and
  greatly simplify the KASLR relocation dance.

  Summary:

   - Remove unused generic cpuidle support (replaced by PSCI version)

   - Fix documentation describing the kernel virtual address space

   - Handling of some new CPU errata in Arm implementations

   - Rework of our exception table code in preparation for handling
     machine checks (i.e. RAS errors) more gracefully

   - Switch over to the generic implementation of ioremap()

   - Fix lockdep tracking in NMI context

   - Instrument our memory barrier macros for KCSAN

   - Rework of the kPTI G->nG page-table repainting so that the MMU
     remains enabled and the boot time is no longer slowed to a crawl
     for systems which require the late remapping

   - Enable support for direct swapping of 2MiB transparent huge-pages
     on systems without MTE

   - Fix handling of MTE tags with allocating new pages with HW KASAN

   - Expose the SMIDR register to userspace via sysfs

   - Continued rework of the stack unwinder, particularly improving the
     behaviour under KASAN

   - More repainting of our system register definitions to match the
     architectural terminology

   - Improvements to the layout of the vDSO objects

   - Support for allocating additional bits of HWCAP2 and exposing
     FEAT_EBF16 to userspace on CPUs that support it

   - Considerable rework and optimisation of our early boot code to
     reduce the need for cache maintenance and avoid jumping in and out
     of the kernel when handling relocation under KASLR

   - Support for disabling SVE and SME support on the kernel
     command-line

   - Support for the Hisilicon HNS3 PMU

   - Miscellanous cleanups, trivial updates and minor fixes"

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (136 commits)
  arm64: Delay initialisation of cpuinfo_arm64::reg_{zcr,smcr}
  arm64: fix KASAN_INLINE
  arm64/hwcap: Support FEAT_EBF16
  arm64/cpufeature: Store elf_hwcaps as a bitmap rather than unsigned long
  arm64/hwcap: Document allocation of upper bits of AT_HWCAP
  arm64: enable THP_SWAP for arm64
  arm64/mm: use GENMASK_ULL for TTBR_BADDR_MASK_52
  arm64: errata: Remove AES hwcap for COMPAT tasks
  arm64: numa: Don't check node against MAX_NUMNODES
  drivers/perf: arm_spe: Fix consistency of SYS_PMSCR_EL1.CX
  perf: RISC-V: Add of_node_put() when breaking out of for_each_of_cpu_node()
  docs: perf: Include hns3-pmu.rst in toctree to fix 'htmldocs' WARNING
  arm64: kasan: Revert "arm64: mte: reset the page tag in page->flags"
  mm: kasan: Skip page unpoisoning only if __GFP_SKIP_KASAN_UNPOISON
  mm: kasan: Skip unpoisoning of user pages
  mm: kasan: Ensure the tags are visible before the tag in page->flags
  drivers/perf: hisi: add driver for HNS3 PMU
  drivers/perf: hisi: Add description for HNS3 PMU driver
  drivers/perf: riscv_pmu_sbi: perf format
  perf/arm-cci: Use the bitmap API to allocate bitmaps
  ...
2022-08-01 10:37:00 -07:00
Peter Zijlstra
1e9fdf21a4 mmu_gather: Remove per arch tlb_{start,end}_vma()
Scattered across the archs are 3 basic forms of tlb_{start,end}_vma().
Provide two new MMU_GATHER_knobs to enumerate them and remove the per
arch tlb_{start,end}_vma() implementations.

 - MMU_GATHER_NO_FLUSH_CACHE indicates the arch has flush_cache_range()
   but does *NOT* want to call it for each VMA.

 - MMU_GATHER_MERGE_VMAS indicates the arch wants to merge the
   invalidate across multiple VMAs if possible.

With these it is possible to capture the three forms:

  1) empty stubs;
     select MMU_GATHER_NO_FLUSH_CACHE and MMU_GATHER_MERGE_VMAS

  2) start: flush_cache_range(), end: empty;
     select MMU_GATHER_MERGE_VMAS

  3) start: flush_cache_range(), end: flush_tlb_range();
     default

Obviously, if the architecture does not have flush_cache_range() then
it also doesn't need to select MMU_GATHER_NO_FLUSH_CACHE.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Will Deacon <will@kernel.org>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-07-21 10:50:13 -07:00
Frederic Weisbecker
493c182282 context_tracking: Take NMI eqs entrypoints over RCU
The RCU dynticks counter is going to be merged into the context tracking
subsystem. Prepare with moving the NMI extended quiescent states
entrypoints to context tracking. For now those are dumb redirection to
existing RCU calls.

Acked-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Uladzislau Rezki <uladzislau.rezki@sony.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Nicolas Saenz Julienne <nsaenz@kernel.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Cc: Yu Liao <liaoyu15@huawei.com>
Cc: Phil Auld <pauld@redhat.com>
Cc: Paul Gortmaker<paul.gortmaker@windriver.com>
Cc: Alex Belits <abelits@marvell.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
Tested-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
2022-07-05 13:32:59 -07:00
Frederic Weisbecker
6f0e6c1598 context_tracking: Take IRQ eqs entrypoints over RCU
The RCU dynticks counter is going to be merged into the context tracking
subsystem. Prepare with moving the IRQ extended quiescent states
entrypoints to context tracking. For now those are dumb redirection to
existing RCU calls.

[ paulmck: Apply Stephen Rothwell feedback from -next. ]
[ paulmck: Apply Nathan Chancellor feedback. ]

Acked-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Uladzislau Rezki <uladzislau.rezki@sony.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Nicolas Saenz Julienne <nsaenz@kernel.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Cc: Yu Liao <liaoyu15@huawei.com>
Cc: Phil Auld <pauld@redhat.com>
Cc: Paul Gortmaker<paul.gortmaker@windriver.com>
Cc: Alex Belits <abelits@marvell.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
Tested-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
2022-07-05 13:32:59 -07:00