Similar to the previous patch, for priority changes
requested by the local PM.
Reported-and-suggested-by: Davide Caratti <dcaratti@redhat.com>
Fixes: 067065422f ("mptcp: add the outgoing MP_PRIO support")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When an incoming MP_PRIO option changes the backup
status of any subflow, we need to reset the packet
scheduler status, or the next send could keep using
the previously selected subflow, without taking in account
the new priorities.
Reported-by: Davide Caratti <dcaratti@redhat.com>
Fixes: 40453a5c61 ("mptcp: add the incoming MP_PRIO support")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The mptcp release callback checks several flags in atomic
context, but only MPTCP_CLEAN_UNA can be up frequently.
Reorganize the code to avoid multiple conditionals in the
most common scenarios.
Additional clarify a related comment.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In some corner cases, the peer handing an incoming ADD_ADDR option, can
receive a retransmitted ADD_ADDR for the same address before the subflow
creation completes.
We can avoid the above issue by generating and sending the ADD_ADDR echo
before starting the MPJ subflow connection.
This slightly changes the behaviour of the packetdrill tests as the
ADD_ADDR echo packet is sent earlier.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Yonglong Li <liyonglong@chinatelecom.cn>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Link: https://lore.kernel.org/r/20220317221444.426335-1-mathew.j.martineau@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Got crash when doing pressure test of mptcp:
===========================================================================
dst_release: dst:ffffa06ce6e5c058 refcnt:-1
kernel tried to execute NX-protected page - exploit attempt? (uid: 0)
BUG: unable to handle kernel paging request at ffffa06ce6e5c058
PGD 190a01067 P4D 190a01067 PUD 43fffb067 PMD 22e403063 PTE 8000000226e5c063
Oops: 0011 [#1] SMP PTI
CPU: 7 PID: 7823 Comm: kworker/7:0 Kdump: loaded Tainted: G E
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.2.1 04/01/2014
Call Trace:
? skb_release_head_state+0x68/0x100
? skb_release_all+0xe/0x30
? kfree_skb+0x32/0xa0
? mptcp_sendmsg_frag+0x57e/0x750
? __mptcp_retrans+0x21b/0x3c0
? __switch_to_asm+0x35/0x70
? mptcp_worker+0x25e/0x320
? process_one_work+0x1a7/0x360
? worker_thread+0x30/0x390
? create_worker+0x1a0/0x1a0
? kthread+0x112/0x130
? kthread_flush_work_fn+0x10/0x10
? ret_from_fork+0x35/0x40
===========================================================================
In __mptcp_alloc_tx_skb skb was allocated and skb->tcp_tsorted_anchor will
be initialized, in under memory pressure situation sk_wmem_schedule will
return false and then kfree_skb. In this case skb->_skb_refdst is not null
because_skb_refdst and tcp_tsorted_anchor are stored in the same mem, and
kfree_skb will try to release dst and cause crash.
Fixes: f70cad1085 ("mptcp: stop relying on tcp_tx_skb_cache")
Reviewed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Yonglong Li <liyonglong@chinatelecom.cn>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Link: https://lore.kernel.org/r/20220317220953.426024-1-mathew.j.martineau@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The fullmesh flag mustn't be used with the signal flag when adding an
address. This patch added the necessary flags check for this case.
Fixes: 73c762c1f0 ("mptcp: set fullmesh flag in pm_netlink")
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The address ID selection for MPJ subflows created in response
to incoming ADD_ADDR option is currently unreliable: it happens
at MPJ socket creation time, when the local address could be
unknown.
Additionally, if the no local endpoint is available for the local
address, a new dummy endpoint is created, confusing the user-land.
This change refactor the code to move the address ID selection inside
the rebuild_header() helper, when the local address eventually
selected by the route lookup is finally known. If the address used
is not mapped by any endpoint - and thus can't be advertised/removed
pick the id 0 instead of allocate a new endpoint.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In some edge scenarios, an MPTCP subflows can use a local address
mapped by a "implicit" endpoint created by the in-kernel path manager.
Such endpoints presence can be confusing, as it's creation is hard
to track and will prevent the later endpoint creation from the user-space
using the same address.
Define a new endpoint flag to mark implicit endpoints and allow the
user-space to replace implicit them with user-provided data at endpoint
creation time.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The in-kernel MPTCP path manager, when processing the MPTCP_PM_CMD_FLUSH_ADDR
command, generates RM_ADDR events for each known local address. While that
is allowed by the RFC, it makes unpredictable the exact number of RM_ADDR
generated when both ends flush the PM addresses.
This change restricts the RM_ADDR generation to previously explicitly
announced addresses, and adjust the expected results in a bunch of related
self-tests.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Set subflow->data_avail with the enum value MPTCP_SUBFLOW_NODATA, instead
of using 0 directly.
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The tracepoint in get_mapping_status() only dumped the incoming mpext
fields. This patch added a new tracepoint in mptcp_sendmsg_frag() to dump
the outgoing mpext too.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch added two more mibs for MP_RST, MPTCP_MIB_MPRSTTX for
the MP_RST sending and MPTCP_MIB_MPRSTRX for the MP_RST receiving.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch added two more mibs for MP_FASTCLOSE, MPTCP_MIB_MPFASTCLOSETX
for the MP_FASTCLOSE sending and MPTCP_MIB_MPFASTCLOSERX for receiving.
Also added a debug log for MP_FASTCLOSE receiving, printed out the recv_key
of MP_FASTCLOSE in mptcp_parse_option to show that MP_RST is received.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Syzkaller with UBSAN uncovered a scenario where a large number of
DATA_FIN retransmits caused a shift-out-of-bounds in the DATA_FIN
timeout calculation:
================================================================================
UBSAN: shift-out-of-bounds in net/mptcp/protocol.c:470:29
shift exponent 32 is too large for 32-bit type 'unsigned int'
CPU: 1 PID: 13059 Comm: kworker/1:0 Not tainted 5.17.0-rc2-00630-g5fbf21c90c60 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
Workqueue: events mptcp_worker
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
ubsan_epilogue+0xb/0x5a lib/ubsan.c:151
__ubsan_handle_shift_out_of_bounds.cold+0xb2/0x20e lib/ubsan.c:330
mptcp_set_datafin_timeout net/mptcp/protocol.c:470 [inline]
__mptcp_retrans.cold+0x72/0x77 net/mptcp/protocol.c:2445
mptcp_worker+0x58a/0xa70 net/mptcp/protocol.c:2528
process_one_work+0x9df/0x16d0 kernel/workqueue.c:2307
worker_thread+0x95/0xe10 kernel/workqueue.c:2454
kthread+0x2f4/0x3b0 kernel/kthread.c:377
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295
</TASK>
================================================================================
This change limits the maximum timeout by limiting the size of the
shift, which keeps all intermediate values in-bounds.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/259
Fixes: 6477dd39e6 ("mptcp: Retransmit DATA_FIN")
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The MPTCP SIOCOUTQ implementation is not very accurate in
case of fallback: it only measures the data in the MPTCP-level
write queue, but it does not take in account the subflow
write queue utilization. In case of fallback the first can be
empty, while the latter is not.
The above produces sporadic self-tests issues and can foul
legit user-space application.
Fix the issue additionally querying the subflow in case of fallback.
Fixes: 644807e3e4 ("mptcp: add SIOCINQ, OUTQ and OUTQNSD ioctls")
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/260
Reported-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The MPTCP in kernel path manager has some constraints on incoming
addresses announce processing, so that in edge scenarios it can
end-up dropping (ignoring) some of such announces.
The above is not very limiting in practice since such scenarios are
very uncommon and MPTCP will recover due to ADD_ADDR retransmissions.
This patch adds a few MIB counters to account for such drop events
to allow easier introspection of the critical scenarios.
Fixes: f7efc7771e ("mptcp: drop argument port from mptcp_pm_announce_addr")
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If an MPTCP endpoint received multiple consecutive incoming
ADD_ADDR options, mptcp_pm_add_addr_received() can overwrite
the current remote address value after the PM lock is released
in mptcp_pm_nl_add_addr_received() and before such address
is echoed.
Fix the issue caching the remote address value a little earlier
and always using the cached value after releasing the PM lock.
Fixes: f7efc7771e ("mptcp: drop argument port from mptcp_pm_announce_addr")
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After commit a88c9e4969 ("mptcp: do not block subflows
creation on errors"), if a signal address races with a failing
subflow creation, the subflow creation failure control path
can trigger the selection of the next address to be announced
while the current announced is still pending.
The above will cause the unintended suppression of the ADD_ADDR
announce.
Fix the issue skipping the to-be-suppressed announce before it
will mark an endpoint as already used. The relevant announce
will be triggered again when the current one will complete.
Fixes: a88c9e4969 ("mptcp: do not block subflows creation on errors")
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Assign the helpers directly rather than save/restore in the context
structure.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
These structures are initialised from the init hooks, so we can't make
them 'const'. But no writes occur afterwards, so we can use ro_after_init.
Also, remove bogus EXPORT_SYMBOL, the only access comes from ip
stack, not from kernel modules.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A few pm-related helpers don't touch arguments which lacking
the const modifier, let's constify them.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Drop the port parameter of mptcp_pm_add_addr_signal() and reflect it to
avoid passing too many parameters.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Drop the unneeded type casts to 'unsigned long long' for printing out the
hmac values in add_addr_hmac_valid() and subflow_thmac_valid().
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The parameter 'sk' became useless since the code using it was dropped
from mptcp_get_options() in the commit 8d548ea1dd ("mptcp: do not set
unconditionally csum_reqd on incoming opt"). Let's drop it.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add setsockopt support for SO_SNDTIMEO_OLD and SO_SNDTIMEO_NEW to fix this
error reported by the mptcp bpf selftest:
(network_helpers.c:64: errno: Operation not supported) Failed to set SO_SNDTIMEO
test_mptcp:FAIL:115
All error logs:
(network_helpers.c:64: errno: Operation not supported) Failed to set SO_SNDTIMEO
test_mptcp:FAIL:115
Summary: 0/0 PASSED, 0 SKIPPED, 1 FAILED
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This change updates mptcp_pm_nl_create_listen_socket() to create
listening sockets bound to IPv6 addresses (where IPv6 is supported).
Fixes: 1729cf186d ("mptcp: create the listening socket for new port")
Acked-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Kishen Maloor <kishen.maloor@intel.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It's illegal to use both port and non-signal flags for adding address.
But it's legal to use both of them for setting flags, which always uses
non-signal flags, backup or fullmesh.
This patch moves this non-signal flag with port check from
mptcp_pm_parse_addr() to mptcp_nl_cmd_add_addr(). Do the check only when
adding addresses, not setting flags or deleting addresses.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch added the fullmesh flag setting support in pm_netlink.
If the fullmesh flag of the address is changed, remove all the related
subflows, update the fullmesh flag and create subflows again.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch printed out the reset infos, reset_transient and reset_reason,
of MP_RST in mptcp_parse_option() to show that MP_RST is received.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
RFC8684 doesn't seem to clearly specify which MPTCP options can be used
together.
Some options are mutually exclusive -- e.g. MP_CAPABLE and MP_JOIN --,
some can be used together -- e.g. DSS + MP_PRIO --, some can but we
prefer not to -- e.g. DSS + ADD_ADDR -- and some have to be used
together at some points -- e.g. MP_FAIL and DSS.
We need to clarify this as a base before allowing other modifications.
For example, does it make sense to send a RM_ADDR with an MPC or MPJ?
This remains open for possible future discussions.
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
MP_FAIL should be use in very rare cases, either when the TCP RST flag
is set -- with or without an MP_RST -- or with a DSS, see
mptcp_established_options().
Here, we do the same in mptcp_write_options().
Co-developed-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move the declarations of ssk and subflow in MP_FAIL and MP_PRIO to the
beginning of the function mptcp_write_options().
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In preparation for FORTIFY_SOURCE performing compile-time and run-time
field bounds checking for memcpy(), memmove(), and memset(), avoid
intentionally writing across neighboring fields.
Use struct_group() to capture the fields to be reset, so that memset()
can be appropriately bounds-checked by the compiler.
Cc: Matthieu Baerts <matthieu.baerts@tessares.net>
Cc: mptcp@lists.linux.dev
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Link: https://lore.kernel.org/r/20220121073935.1154263-1-keescook@chromium.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In mptcp_pm_nl_rm_addr_or_subflow(), the bit of rm_list->ids[i] in the
id_avail_bitmap should be set, not rm_list->ids[1]. This patch fixed it.
Fixes: 86e39e0448 ("mptcp: keep track of local endpoint still available for each msk")
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The MPTCP endpoint list is under RCU protection, guarded by the
pernet spinlock. mptcp_nl_cmd_set_flags() traverses the list
without acquiring the spin-lock nor under the RCU critical section.
This change addresses the issue performing the lookup and the endpoint
update under the pernet spinlock.
Fixes: 0f9f696a50 ("mptcp: add set_flags command in PM netlink")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch reused __mptcp_make_csum() in validate_data_csum() instead of
open-coding.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch changed the type of the last parameter of __mptcp_make_csum()
from __sum16 to __wsum. And export this function in protocol.h.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
'ptr += 1;' was omitted in the original code.
If the DSS is the last option -- which is what we have most of the
time -- that's not an issue. But it is if we need to send something else
after like a RM_ADDR or an MP_PRIO.
Fixes: 1bff1e43a3 ("mptcp: optimize out option generation")
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When these two options had to be sent -- which is not common -- the DSS
size was not being taken into account in the remaining size.
Additionally in this situation, the reported size was only the one of
the MP_FAIL which can cause issue if at the end, we need to write more
in the TCP options than previously said.
Here we use a dedicated variable for MP_FAIL size to keep the
WARN_ON_ONCE() just after.
Fixes: c25aeb4e09 ("mptcp: MP_FAIL suboption sending")
Acked-and-tested-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently the msk->flags bitmask carries both state for the
mptcp_release_cb() - mostly touched under the mptcp data lock
- and others state info touched even outside such lock scope.
As a consequence, msk->flags is always manipulated with
atomic operations.
This change splits such bitmask in two separate fields, so
that we use plain bit operations when touching the
cb-related info.
The MPTCP_PUSH_PENDING bit needs additional care, as it is the
only CB related field currently accessed either under the mptcp
data lock or the mptcp socket lock.
Let's add another mask just for such bit's sake.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We can simplify the join list handling leveraging the
mptcp_release_cb(): if we can acquire the msk socket
lock at mptcp_finish_join time, move the new subflow
directly into the conn_list, otherwise place it on join_list and
let the release_cb process such list.
Since pending MPJ connection are now always processed
in a timely way, we can avoid flushing the join list
every time we have to process all the current subflows.
Additionally we can now use the mptcp data lock to protect
the join_list, removing the additional spin lock.
Finally, the MPJ handshake is now always finalized under the
msk socket lock, we can drop the additional synchronization
between mptcp_finish_join() and mptcp_close().
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If the MPTCP configuration allows for multiple subflows
creation, and the first additional subflows never reach
the fully established status - e.g. due to packets drop or
reset - the in kernel path manager do not move to the
next subflow.
This patch introduces a new PM helper to cope with MPJ
subflow creation failure and delay and hook it where appropriate.
Such helper triggers additional subflow creation, as needed
and updates the PM subflow counter, if the current one is
closing.
Additionally start all the needed additional subflows
as soon as the MPTCP socket is fully established, so we don't
have to cope with slow MPJ handshake blocking the next subflow
creation.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Include into the path manager status a bitmap tracking the list
of local endpoints still available - not yet used - for the
relevant mptcp socket.
Keep such map updated at endpoint creation/deletion time, so
that we can easily skip already used endpoint at local address
selection time.
The endpoint used by the initial subflow is lazyly accounted at
subflow creation time: the usage bitmap is be up2date before
endpoint selection and we avoid such unneeded task in some relevant
scenarios - e.g. busy servers accepting incoming subflows but
not creating any additional ones nor annuncing additional addresses.
Overall this allows for fair local endpoints usage in case of
subflow failure.
As a side effect, this patch also enforces that each endpoint
is used at most once for each mptcp connection.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Check for all MPJ variant at once, this reduces the number
of conditionals traversed on average and will simplify the
next patch.
No functional change intended.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since full-mesh endpoint support, the reception of a single ADD_ADDR
option can cause multiple subflows creation. When such option is
accepted we increment 'add_addr_accepted' by one. When we received
a paired RM_ADDR option, we deleted all the relevant subflows,
decrementing 'add_addr_accepted' by one for each of them.
We have a similar issue for 'local_addr_used'
Fix them moving the pm endpoint accounting outside the subflow
traversal.
Fixes: 1a0d6136c5 ("mptcp: local addresses fullmesh")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Handle explicitly AF_UNSPEC in mptcp_stream_connnect() to
allow user-space to disconnect established MPTCP connections
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After the previous patch, msk->subflow will never be deleted during
the whole msk lifetime. We don't need anymore to acquire references to
it in mptcp_stream_accept() and we can use the listener subflow accept
queue to simplify mptcp_poll() for listener socket.
Overall this removes a lock pair and 4 more atomic operations per
accept().
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The current mptcp_disconnect() implementation lacks several
steps, we additionally need to reset the msk socket state
and flush the subflow list.
Factor out the needed helper to avoid code duplication.
Additionally ensure that the initial subflow is disposed
only after mptcp_close(), just reset it at disconnect time.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Allow the MPTCP xmit path to add MP_FASTCLOSE suboption
on RST egress packets.
Additionally reorder related options writing to reduce
the number of conditionals required in the fast path.
Co-developed-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After shutdown, for fallback MPTCP sockets, we always have
write_seq == snd_una+1
The above will foul OUTQ ioctl(). Keep snd_una in sync with
write_seq even after shutdown.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
entry->addr.id is u8 with a range from 0 to 255 and MAX_ADDR_ID is 255.
We should drop both false expressions of (entry->addr.id > MAX_ADDR_ID).
We should also remove the obsolete parentheses in the first if branch.
Use U8_MAX for MAX_ADDR_ID and add a comment to show the link to
mptcp_addr_info.id as suggested by Mr. Matthieu Baerts.
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jean Sacren <sakiwit@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The MPTCP packet scheduler has sub-optimal behavior with asymmetric
subflows: if the faster subflow-level cwin is closed, the packet
scheduler can enqueue "too much" data on a slower subflow.
When all the data on the faster subflow is acked, if the mptcp-level
cwin is closed, and link utilization becomes suboptimal.
The solution is implementing blest-like[1] HoL-blocking estimation,
transmitting only on the subflow with the shorter estimated time to
flush the queued memory. If such subflows cwin is closed, we wait
even if other subflows are available.
This is quite simpler than the original blest implementation, as we
leverage the pacing rate provided by the TCP socket. To get a more
accurate estimation for the subflow linger-time, we maintain a
per-subflow weighted average of such info.
Additionally drop magic numbers usage in favor of newly defined
macros and use more meaningful names for status variable.
[1] http://dl.ifip.org/db/conf/networking/networking2016/1570234725.pdf
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/137
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The mptcp ULP extension relies on sk->sk_sock_kern being set correctly:
It prevents setsockopt(fd, IPPROTO_TCP, TCP_ULP, "mptcp", 6); from
working for plain tcp sockets (any userspace-exposed socket).
But in case of fallback, accept() can return a plain tcp sk.
In such case, sk is still tagged as 'kernel' and setsockopt will work.
This will crash the kernel, The subflow extension has a NULL ctx->conn
mptcp socket:
BUG: KASAN: null-ptr-deref in subflow_data_ready+0x181/0x2b0
Call Trace:
tcp_data_ready+0xf8/0x370
[..]
Fixes: cf7da0d66c ("mptcp: Create SUBFLOW socket for incoming connections")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
TCP_ULP setsockopt cannot be used for mptcp because its already
used internally to plumb subflow (tcp) sockets to the mptcp layer.
syzbot managed to trigger a crash for mptcp connections that are
in fallback mode:
KASAN: null-ptr-deref in range [0x0000000000000020-0x0000000000000027]
CPU: 1 PID: 1083 Comm: syz-executor.3 Not tainted 5.16.0-rc2-syzkaller #0
RIP: 0010:tls_build_proto net/tls/tls_main.c:776 [inline]
[..]
__tcp_set_ulp net/ipv4/tcp_ulp.c:139 [inline]
tcp_set_ulp+0x428/0x4c0 net/ipv4/tcp_ulp.c:160
do_tcp_setsockopt+0x455/0x37c0 net/ipv4/tcp.c:3391
mptcp_setsockopt+0x1b47/0x2400 net/mptcp/sockopt.c:638
Remove support for TCP_ULP setsockopt.
Fixes: d9e4c12918 ("mptcp: only admit explicitly supported sockopt")
Reported-by: syzbot+1fd9b69cde42967d1add@syzkaller.appspotmail.com
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
First, add cork and nodelay fields to the mptcp_sock structure
so they can be used in sync_socket_options(), and fill them on setsockopt
while holding the msk socket lock.
Then, on setsockopt set proper tcp_sk(ssk)->nonagle values for subflows
by calling __tcp_sock_set_cork() or __tcp_sock_set_nodelay() on the ssk
while holding the ssk socket lock.
tcp_push_pending_frames() will be invoked on the ssk if a cork was cleared
or nodelay was set. Also set MPTCP_PUSH_PENDING bit by calling
mptcp_check_and_set_pending(). This will lead to __mptcp_push_pending()
being called inside mptcp_release_cb() with new tcp_sk(ssk)->nonagle.
Also add getsockopt support for TCP_CORK and TCP_NODELAY.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Maxim Galaganov <max@internet.ru>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Expose the mptcp_check_and_set_pending() function for use inside MPTCP
sockopt code. The next patch will call it when TCP_CORK is cleared or
TCP_NODELAY is set on the MPTCP socket in order to push pending data
from mptcp_release_cb().
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Maxim Galaganov <max@internet.ru>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
earlier patch added IP_TOS setsockopt support, this allows to get
the value set by earlier setsockopt.
Extends mptcp_put_int_option to handle u8 input/output by
adding required cast.
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
a non-zero 'id' is sufficient to identify MPTCP endpoints: allow changing
the value of 'backup' bit by simply specifying the endpoint id.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/158
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Allows to query in-sequence data ready for read(), total bytes in
write queue and total bytes in write queue that have not yet been sent.
v2: remove unneeded READ_ONCE() (Paolo Abeni)
v3: check for new data unconditionally in SIOCINQ ioctl (Mat Martineau)
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Support the TCP_INQ setsockopt.
This is a boolean that tells recvmsg path to include the remaining
in-sequence bytes in the cmsg data.
v2: do not use CB(skb)->offset, increment map_seq instead (Paolo Abeni)
v3: adjust CB(skb)->map_seq when taking skb from ofo queue (Paolo Abeni)
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/224
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Scheduling a delack in mptcp_established_options_mp() is
not a good idea: such function is called by tcp_send_ack() and
the pending delayed ack will be cleared shortly after by the
tcp_event_ack_sent() call in __tcp_transmit_skb().
Instead use the mptcp delegated action infrastructure to
schedule the delayed ack after the current bh processing completes.
Additionally moves the schedule_3rdack_retransmission() helper
into protocol.c to avoid making it visible in a different compilation
unit.
Fixes: ec3edaa7ca ("mptcp: Add handling of outgoing MP_JOIN requests")
Reviewed-by: Mat Martineau <mathew.j.martineau>@linux.intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To compute the rtx timeout schedule_3rdack_retransmission() does multiple
things in the wrong way: srtt_us is measured in usec/8 and the timeout
itself is an absolute value.
Fixes: ec3edaa7ca ("mptcp: Add handling of outgoing MP_JOIN requests")
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau>@linux.intel.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
These options also need to be set before bind, so do the sync of msk to
new ssk socket a bit earlier.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
SOL_IP provides a way to configure network layer attributes in a
socket. This patch adds support for IP_TOS for setsockopt(.. ,SOL_IP, ..)
Support for SOL_IP is added in mptcp_setsockopt() and IP_TOS is handled in
a private function. The idea here is to take in the value passed for IP_TOS
and set it to the current subflow, open subflows as well new subflows that
might be created after the initial call to setsockopt(). This sync is done
using sync_socket_options(.., ssk) and setting the value of tos using
__ip_sock_set_tos(ssk,..).
The patch has been tested using the packetdrill script here -
https://github.com/multipath-tcp/mptcp_net-next/issues/220#issuecomment-947863717
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/220
Signed-off-by: Poorva Sonparote <psonparo@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
MPTCP hard codes it, let us instead provide this helper.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
tcp_memory_allocated and tcp_sockets_allocated often share
a common cache line, source of false sharing.
Also take care of udp_memory_allocated and mptcp_sockets_allocated.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
using packetdrill it's possible to observe that the receiver key contains
random values when clients transmit MP_CAPABLE with data and checksum (as
specified in RFC8684 §3.1). Fix the layout of mptcp_out_options, to avoid
using the skb extension copy when writing the MP_CAPABLE sub-option.
Fixes: d7b2690837 ("mptcp: shrink mptcp_out_options struct")
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/233
Reported-by: Poorva Sonparote <psonparo@redhat.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Link: https://lore.kernel.org/r/20211027203855.264600-1-mathew.j.martineau@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Setting skb->ip_summed to CHECKSUM_PARTIAL can be centralized
in tcp_stream_alloc_skb() and __mptcp_do_alloc_tx_skb()
instead of being done multiple times.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
TCP/MPTCP sendmsg() no longer puts payload in skb->head,
we can remove not needed code.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
All tcp_remove_empty_skb() callers now use tcp_write_queue_tail()
for the skb argument, we can therefore factorize code.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since mptcp_set_timeout() had removed from mptcp_push_release() in
commit 33d41c9cd7 ("mptcp: more accurate timeout"), the argument
sk in mptcp_push_release() became useless. Let's drop it.
Fixes: 33d41c9cd7 ("mptcp: more accurate timeout")
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
All the mptcp receive path is protected by the msk socket
spinlock. As consequences, the tx path has to play a few tricks to
allocate the forward memory without acquiring the spinlock multiple
times, making the overall TX path quite complex.
This patch tries to clean-up a bit the tx path, using completely
separated fwd memory allocation, for the rx and the tx path.
The forward memory allocated in the rx path is now accounted in
msk->rmem_fwd_alloc and is (still) protected by the msk socket spinlock.
To cope with the above we provide a few MPTCP-specific variants for
the helpers to charge, uncharge, reclaim and free the forward memory
in the receive path.
msk->sk_forward_alloc now accounts only the forward memory for the tx
path, we can use the plain core sock helper to manipulate it and drop
quite a bit of complexity.
On memory pressure, both rx and tx fwd memories are reclaimed.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This function is only used within pm_netlink.c now.
Fixes: 067065422f ("mptcp: add the outgoing MP_PRIO support")
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The current default does not allowing additional subflows, mostly
as a safety restriction to avoid uncontrolled resource consumption
on busy servers.
Still the system admin and/or the application have to opt-in to
MPTCP explicitly. After that, they need to change (increase) the
default maximum number of additional subflows.
Let set that to reasonable default, and make end-users life easier.
Additionally we need to update some self-tests accordingly.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Coverity complains of a possible NULL dereference in
mptcp_getsockopt_subflow_addrs():
861 } else if (sk->sk_family == AF_INET6) {
3. returned_null: inet6_sk returns NULL. [show details]
4. var_assigned: Assigning: np = NULL return value from inet6_sk.
862 const struct ipv6_pinfo *np = inet6_sk(sk);
Fix this by checking for NULL.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/231
Fixes: c11c5906bc ("mptcp: add MPTCP_SUBFLOW_ADDRS getsockopt support")
Cc: Florian Westphal <fw@strlen.de>
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
[mjm: Added WARN_ON_ONCE() to the unexpected case]
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
tools/testing/selftests/net/ioam6.sh
7b1700e009 ("selftests: net: modify IOAM tests for undef bits")
bf77b1400a ("selftests: net: Test for the IOAM encapsulation with IPv6")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Using snmp_get_cpu_field_batch() allows for better cpu cache
utilization, especially on hosts with large number of cpus.
Also remove special handling when mptcp mibs where not yet
allocated.
I chose to use temporary storage on the stack to keep this patch simple.
We might in the future use the storage allocated in netstat_seq_show().
Combined with prior patch (inlining snmp_get_cpu_field)
time to fetch and output mptcp counters on a 256 cpu host [1]
goes from 75 usec to 16 usec.
[1] L1 cache size is 32KB, it is not big enough to hold all dataset.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The retransmit head will be NULL in case there is no in-flight data
(meaning all data injected into network has been acked).
In that case the retransmit timer is stopped.
This is only correct if there is no more pending, not-yet-sent data.
If there is, the retransmit timer needs to set the PENDING bit again so
that mptcp tries to send the remaining (new) data once a subflow can accept
more data.
Also, mptcp_subflow_get_retrans() has to be called unconditionally.
This function checks for subflows that have become unresponsive and marks
them as stale, so in the case where the rtx queue is empty, subflows
will never be marked stale which prevents available backup subflows from
becoming eligible for transmit.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/226
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The update on recovery is not correct.
msk->tx_pending_data += msk->snd_nxt - rtx_head->data_seq;
will update tx_pending_data multiple times when a subflow is declared
stale while earlier recovery is still in progress.
This means that tx_pending_data will still be positive even after
all data as has been transmitted.
Rather than fix it, remove this field: there are no consumers.
The outstanding data byte count can be computed either via
"msk->write_seq - rtx_head->data_seq" or
"msk->write_seq - msk->snd_una".
The latter is more recent/accurate estimate as rtx_head adjustment
is deferred until mptcp lock can be acquired.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We have a few more places where the mptcp code duplicates
lockdep_assert_held_once(). Let's use the existing macro and
avoid a bunch of compiler's conditional.
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since OPTIONS_MPTCP_MPC has been defined, use it instead of open-coding.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@xiaomi.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When recovering after a link failure, snd_nxt should not be set to a
lower value. Else, update of snd_nxt is broken because:
msk->snd_nxt += ret; (where ret is number of bytes sent)
assumes that snd_nxt always moves forward.
After reduction, its possible that snd_nxt update gets out of sync:
dfrag we just sent might have had a data sequence number even past
recovery_snd_nxt.
This change factors the common msk state update to a helper
and updates snd_nxt based on the current dfrag data sequence number.
The conditional is required for the recovery phase where we may
re-transmit old dfrags that are before current snd_nxt.
After this change, snd_nxt only moves forward and covers all in-sequence
data that was transmitted.
recovery_snd_nxt is retained to detect when recovery has completed.
Fixes: 1e1d9d6f11 ("mptcp: handle pending data on closed subflow")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
current Linux refuses to change the 'backup' bit of MPTCP endpoints, i.e.
using MPTCP_PM_CMD_SET_FLAGS, unless it finds (at least) one subflow that
matches the endpoint address. There is no reason for that, so we can just
ignore the return value of mptcp_nl_addr_backup(). In this way, endpoints
can reconfigure their 'backup' flag even if no MPTCP sockets are open (or
more generally, in case the MP_PRIO message is not sent out).
Fixes: 0f9f696a50 ("mptcp: add set_flags command in PM netlink")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
mptcp_token_get_sock() may return a mptcp socket that is in
a different net namespace than the socket that received the token value.
The mptcp syncookie code path had an explicit check for this,
this moves the test into mptcp_token_get_sock() function.
Eventually token.c should be converted to pernet storage, but
such change is not suitable for net tree.
Fixes: 2c5ebd001d ("mptcp: refactor token container")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We want to revert the skb TX cache, but MPTCP is currently
using it unconditionally.
Rework the MPTCP tx code, so that tcp_tx_skb_cache is not
needed anymore: do the whole coalescing check, skb allocation
skb initialization/update inside mptcp_sendmsg_frag(), quite
alike the current TCP code.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This retrieves the address pairs of all subflows currently
active for a given mptcp connection.
It re-uses the same meta-header as for MPTCP_TCPINFO.
A new structure is provided to hold the subflow
address data:
struct mptcp_subflow_addrs {
union {
__kernel_sa_family_t sa_family;
struct sockaddr sa_local;
struct sockaddr_in sin_local;
struct sockaddr_in6 sin6_local;
struct sockaddr_storage ss_local;
};
union {
struct sockaddr sa_remote;
struct sockaddr_in sin_remote;
struct sockaddr_in6 sin6_remote;
struct sockaddr_storage ss_remote;
};
};
Usage of the new getsockopt is very similar to
MPTCP_TCPINFO one.
Userspace allocates a
'struct mptcp_subflow_data', followed by one or
more 'struct mptcp_subflow_addrs', then inits the
mptcp_subflow_data structure as follows:
struct mptcp_subflow_addrs *sf_addr;
struct mptcp_subflow_data *addr;
socklen_t olen = sizeof(*addr) + (8 * sizeof(*sf_addr));
addr = malloc(olen);
addr->size_subflow_data = sizeof(*addr);
addr->num_subflows = 0;
addr->size_kernel = 0;
addr->size_user = sizeof(struct mptcp_subflow_addrs);
sf_addr = (struct mptcp_subflow_addrs *)(addr + 1);
and then retrieves the endpoint addresses via:
ret = getsockopt(fd, SOL_MPTCP, MPTCP_SUBFLOW_ADDRS,
addr, &olen);
If the call succeeds, kernel will have added up to 8
endpoint addresses after the 'mptcp_subflow_data' header.
Userspace needs to re-check 'olen' value to detect how
many bytes have been filled in by the kernel.
Userspace can check addr->num_subflows to discover when
there were more subflows that available data space.
Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Allow users to retrieve TCP_INFO data of all subflows.
Users need to pre-initialize a meta header that has to be
prepended to the data buffer that will be filled with the tcp info data.
The meta header looks like this:
struct mptcp_subflow_data {
__u32 size_subflow_data;/* size of this structure in userspace */
__u32 num_subflows; /* must be 0, set by kernel */
__u32 size_kernel; /* must be 0, set by kernel */
__u32 size_user; /* size of one element in data[] */
} __attribute__((aligned(8)));
size_subflow_data has to be set to 'sizeof(struct mptcp_subflow_data)'.
This allows to extend mptcp_subflow_data structure later on without
breaking backwards compatibility.
If the structure is extended later on, kernel knows where the
userspace-provided meta header ends, even if userspace uses an older
(smaller) version of the structure.
num_subflows must be set to 0. If the getsockopt request succeeds (return
value is 0), it will be updated to contain the number of active subflows
for the given logical connection.
size_kernel must be set to 0. If the getsockopt request is successful,
it will contain the size of the 'struct tcp_info' as known by the kernel.
This is informational only.
size_user must be set to 'sizeof(struct tcp_info)'.
This allows the kernel to only fill in the space reserved/expected by
userspace.
Example:
struct my_tcp_info {
struct mptcp_subflow_data d;
struct tcp_info ti[2];
};
struct my_tcp_info ti;
socklen_t olen;
memset(&ti, 0, sizeof(ti));
ti.d.size_subflow_data = sizeof(struct mptcp_subflow_data);
ti.d.size_user = sizeof(struct tcp_info);
olen = sizeof(ti);
ret = getsockopt(fd, SOL_MPTCP, MPTCP_TCPINFO, &ti, &olen);
if (ret < 0)
die_perror("getsockopt MPTCP_TCPINFO");
mptcp_subflow_data.num_subflows is populated with the number of
subflows that exist on the kernel side for the logical mptcp connection.
This allows userspace to re-try with a larger tcp_info array if the number
of subflows was larger than the available space in the ti[] array.
olen has to be set to the number of bytes that userspace has allocated to
receive the kernel data. It will be updated to contain the real number
bytes that have been copied to by the kernel.
In the above example, if the number if subflows was 1, olen is equal to
'sizeof(struct mptcp_subflow_data) + sizeof(struct tcp_info).
For 2 or more subflows olen is equal to 'sizeof(struct my_tcp_info)'.
If there was more data that could not be copied due to lack of space
in the option buffer, userspace can detect this by checking
mptcp_subflow_data->num_subflows.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Its not compatible with multipath-tcp.org kernel one.
1. The out-of-tree implementation defines a different 'struct mptcp_info',
with embedded __user addresses for additional data such as
endpoint addresses.
2. Mat Martineau points out that embedded __user addresses doesn't work
with BPF_CGROUP_RUN_PROG_GETSOCKOPT() which assumes that copying in
optsize bytes from optval provides all data that got copied to userspace.
This provides mptcp_info data for the given mptcp socket.
Userspace sets optlen to the size of the structure it expects.
The kernel updates it to contain the number of bytes that it copied.
This allows to append more information to the structure later.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Will be re-used from getsockopt path.
Since diag can be a module, we can't export the helper from diag, it
needs to be moved to core.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian noted that if mptcp_alloc_tx_skb() allocation fails
in __mptcp_push_pending(), we can end-up invoking
mptcp_push_release()/tcp_push() with a zero mss, causing
a divide by 0 error.
This change addresses the issue refactoring the skb allocation
code checking if skb collapsing will happen for sure and doing
the skb allocation only after such check. Skb allocation will
now happen only after the call to tcp_send_mss() which
correctly initializes mss_now.
As side bonuses we now fill the skb tx cache only when needed,
and this also clean-up a bit the output path.
v1 -> v2:
- use lockdep_assert_held_once() - Jakub
- fix indentation - Jakub
Reported-by: Florian Westphal <fw@strlen.de>
Fixes: 724cfd2ee8 ("mptcp: allocate TX skbs in msk context")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix the following coccicheck warning:
./net/mptcp/protocol.h:36:50-73: duplicated argument to & or |
The OPTION_MPTCP_MPJ_SYNACK here is duplicate.
Here should be OPTION_MPTCP_MPJ_ACK.
Fixes: 74c7dfbee3 ("mptcp: consolidate in_opt sub-options fields in a bitmask")
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian noted the locking schema used by __mptcp_push_pending()
is hard to follow, let's add some more descriptive comments
and drop an unneeded and confusing check.
Suggested-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Most MPTCP packets carries a single MPTCP subption: the
DSS containing the mapping for the current packet.
Check explicitly for the above, so that is such scenario we
replace most conditional statements with a single likely() one.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This makes input options processing more consistent with
output ones and will simplify the next patch.
Also avoid clearing the suboption field after processing
it, since it's not needed.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This change reorder the mptcp_options_received fields
to shrink the structure a bit and to ensure the most
frequently used fields are all in the first cacheline.
Sub-opt specific flags are moved out of the suboptions area,
and we must now explicitly set them when the relevant
suboption is parsed.
There is a notable exception: 'csum_reqd' is used by both DSS
and MPC suboptions, and keeping such field in the suboptions
flag area will simplfy the next patch.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Should be set only if the ingress packets present it, otherwise
we can confuse csum validation.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch added the mibs for MP_FAIL: MPTCP_MIB_MPFAILTX and
MPTCP_MIB_MPFAILRX.
Signed-off-by: Geliang Tang <geliangtang@xiaomi.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When a bad checksum is detected, set the send_mp_fail flag to send out
the MP_FAIL option.
Add a new function mptcp_has_another_subflow() to check whether there's
only a single subflow.
When multiple subflows are in use, close the affected subflow with a RST
that includes an MP_FAIL option and discard the data with the bad
checksum.
Set the sk_state of the subsocket to TCP_CLOSE, then the flag
MPTCP_WORK_CLOSE_SUBFLOW will be set in subflow_sched_work_if_closed,
and the subflow will be closed.
When a single subfow is in use, temporarily handled by sending MP_FAIL
with a RST too.
Signed-off-by: Geliang Tang <geliangtang@xiaomi.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch added handling for receiving MP_FAIL suboption.
Add a new members mp_fail and fail_seq in struct mptcp_options_received.
When MP_FAIL suboption is received, set mp_fail to 1 and save the sequence
number to fail_seq.
Then invoke mptcp_pm_mp_fail_received to deal with the MP_FAIL suboption.
Signed-off-by: Geliang Tang <geliangtang@xiaomi.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch added the MP_FAIL suboption sending support.
Add a new flag named send_mp_fail in struct mptcp_subflow_context. If
this flag is set, send out MP_FAIL suboption.
Add a new member fail_seq in struct mptcp_out_options to save the data
sequence number to put into the MP_FAIL suboption.
An MP_FAIL option could be included in a RST or on the subflow-level
ACK.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@xiaomi.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently we have several protocol constraints on MPTCP options
generation (e.g. MPC and MPJ subopt are mutually exclusive)
and some additional ones required by our implementation
(e.g. almost all ADD_ADDR variant are mutually exclusive with
everything else).
We can leverage the above to optimize the out option generation:
we check DSS/MPC/MPJ presence in a mutually exclusive way,
avoiding many unneeded conditionals in the common cases.
Additionally extend the existing constraints on ADD_ADDR opt on
all subvariants, so that it becomes fully mutually exclusive with
the above and we can skip another conditional statement for the
common case.
This change is also needed by the next patch.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
MPTCP_ADD_ADDR_IPV6 and MPTCP_ADD_ADDR_PORT are not necessary, we can get
these info from pm.local or pm.remote.
Drop mptcp_pm_should_add_signal_ipv6 and mptcp_pm_should_add_signal_port
too.
Co-developed-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Yonglong Li <liyonglong@chinatelecom.cn>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
According to the MPTCP_ADD_ADDR_SIGNAL or MPTCP_ADD_ADDR_ECHO flag, build
the ADD_ADDR/ADD_ADDR_ECHO option.
In mptcp_pm_add_addr_signal(), use opts->addr to save the announced
ADD_ADDR or ADD_ADDR_ECHO address.
Co-developed-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Co-developed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Yonglong Li <liyonglong@chinatelecom.cn>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ADD_ADDR shares pm.addr_signal with RM_ADDR, so after RM_ADDR/ADD_ADDR
has done, we should not clean ADD_ADDR/RM_ADDR's addr_signal.
Co-developed-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Yonglong Li <liyonglong@chinatelecom.cn>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use MPTCP_ADD_ADDR_SIGNAL only for the action of sending ADD_ADDR, and
use MPTCP_ADD_ADDR_ECHO only for the action of sending ADD_ADDR echo.
Use msk->pm.local to save the announced ADD_ADDR address only, and reuse
msk->pm.remote to save the announced ADD_ADDR_ECHO address.
To prepare for the next patch.
Co-developed-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Yonglong Li <liyonglong@chinatelecom.cn>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch moved the drop_other_suboptions check from
mptcp_established_options_add_addr() into mptcp_pm_add_addr_signal(), do
it under the PM lock to avoid the race between this check and
mptcp_pm_add_addr_signal().
For this, added a new parameter for mptcp_pm_add_addr_signal() to get
the drop_other_suboptions value. And drop the other suboptions after the
option length check if drop_other_suboptions is true.
Additionally, always drop the other suboption for TCP pure ack:
that makes both the code simpler and the MPTCP behaviour more
consistent.
Co-developed-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Co-developed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Yonglong Li <liyonglong@chinatelecom.cn>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If directly after an MP_CAPABLE 3WHS, the client receives an ADD_ADDR
with HMAC from the server, it is enough to switch to a "fully
established" mode because it has received more MPTCP options.
It was then OK to enable the "fully_established" flag on the MPTCP
socket. Still, best to check if the ADD_ADDR looks valid by looking if
it contains an HMAC (no 'echo' bit). If an ADD_ADDR echo is received
while we are not in "fully established" mode, it is strange and then
we should not switch to this mode now.
But that is not enough. On one hand, the path-manager has be notified
the state has changed. On the other hand, the "fully_established" flag
on the subflow socket should be turned on as well not to re-send the
MP_CAPABLE 3rd ACK content with the next ACK.
Fixes: 84dfe3677a ("mptcp: send out dedicated ADD_ADDR packet")
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In mptcp_pm_nl_add_addr_received(), fill a temporary allocate array of
all local address corresponding to the fullmesh endpoint. If such array
is empty, keep the current behavior.
Elsewhere loop on such array and create a subflow for each local address
towards the given remote address
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@xiaomi.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch added and managed a new per endpoint flag, named
MPTCP_PM_ADDR_FLAG_FULLMESH.
In mptcp_pm_create_subflow_or_signal_addr(), if such flag is set, instead
of:
remote_address((struct sock_common *)sk, &remote);
fill a temporary allocated array of all known remote address. After
releaseing the pm lock loop on such array and create a subflow for each
remote address from the given local.
Note that the we could still use an array even for non 'fullmesh'
endpoint: with a single entry corresponding to the primary MPC subflow
remote address.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@xiaomi.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch added a new helper mptcp_pm_get_flags_and_ifindex_by_id(),
and used it in __mptcp_subflow_connect() to get the flags and ifindex
values.
Then the two arguments flags and ifindex of __mptcp_subflow_connect()
can be dropped.
Signed-off-by: Geliang Tang <geliangtang@xiaomi.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
the parsed incoming backup flag is not propagated
to the subflow itself, the client may end-up using it
to send data.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/191
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This allows monitoring exceptional events like
active backup scenarios.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The msk can use backup subflows to transmit in-sequence data
only if there are no other active subflow. On active backup
scenario, the MPTCP connection can do forward progress only
due to MPTCP retransmissions - rtx can pick backup subflows.
This patch introduces a new flag flow MPTCP subflows: if the
underlying TCP connection made no progresses for long time,
and there are other less problematic subflows available, the
given subflow become stale.
Stale subflows are not considered active: if all non backup
subflows become stale, the MPTCP scheduler can pick backup
subflows for plain transmissions.
Stale subflows can return in active state, as soon as any reply
from the peer is observed.
Active backup scenarios can now leverage the available b/w
with no restrinction.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/207
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Reorder the data in mptcp_pernet to avoid wasting space
with no reasons and constify the access helpers.
No functional changes intended.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The PM can close active subflow, e.g. due to ingress RM_ADDR
option. Such subflow could carry data still unacked at the
MPTCP-level, both in the write and the rtx_queue, which has
never reached the other peer.
Currently the mptcp-level retransmission will deliver such data,
but at a very low rate (at most 1 DSM for each MPTCP rtx interval).
We can speed-up the recovery a lot, moving all the unacked in the
tcp write_queue, so that it will be pushed again via other
subflows, at the speed allowed by them.
Also make available the new helper for later patches.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/207
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The current mptcp re-inject strategy is very aggressive,
we have mptcp-level retransmissions even on single subflow
connection, if the link in-use is lossy.
Let's be a little more conservative: we do retransmit
only if at least a subflow has write and rtx queue empty.
Additionally use the backup subflows only if the active
subflows are stale - no progresses in at least an rtx period
and ignore stale subflows for rtx timeout update
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/207
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As reported by Maxim, we have a lot of MPTCP-level
retransmissions when multilple links with different latencies
are in use.
This patch refactor the mptcp-level timeout accounting so that
the maximum of all the active subflow timeout is used. To avoid
traversing the subflow list multiple times, the update is
performed inside the packet scheduler.
Additionally clean-up a bit timeout handling.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
kfree_rcu() had been removed from pm_netlink.c, so this rcu field in
struct mptcp_pm_addr_entry became useless. Let's drop it.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Link: https://lore.kernel.org/r/20210802231914.54709-1-mathew.j.martineau@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It has 'if (err >0 )' statement in nlmsg_unicast(), so use nlmsg_unicast()
instead of netlink_unicast(), this looks more concise.
v2: remove the change in netfilter.
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
After commit 879526030c ("mptcp: protect the rx path with
the msk socket spinlock") the rmem currently used by a given
msk is really sk_rmem_alloc - rmem_released.
The safety check in mptcp_data_ready() does not take the above
in due account, as a result legit incoming data is kept in
subflow receive queue with no reason, delaying or blocking
MPTCP-level ack generation.
This change addresses the issue introducing a new helper to fetch
the rmem memory and using it as needed. Additionally add a MIB
counter for the exceptional event described above - the peer is
misbehaving.
Finally, introduce the required annotation when rmem_released is
updated.
Fixes: 879526030c ("mptcp: protect the rx path with the msk socket spinlock")
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/211
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If check_fully_established() causes a subflow reset, it should not
continue to process the packet in tcp_data_queue().
Add a return value to mptcp_incoming_options(), and return false if a
subflow has been reset, else return true. Then drop the packet in
tcp_data_queue()/tcp_rcv_state_process() if mptcp_incoming_options()
return false.
Fixes: d582484726 ("mptcp: fix fallback for MP_JOIN subflows")
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Lots of "TCP: tcp_fin: Impossible, sk->sk_state=7" in client side
when doing stress testing using wrk and webfsd.
There are at least two cases may trigger this warning:
1.mptcp is in syncookie, and server recv MP_JOIN SYN request,
in subflow_check_req(), the mptcp_can_accept_new_subflow()
return false, so subflow_init_req_cookie_join_save() isn't
called, i.e. not store the data present in the MP_JOIN syn
request and the random nonce in hash table - join_entries[],
but still send synack. When recv 3rd-ack,
mptcp_token_join_cookie_init_state() will return false, and
3rd-ack is dropped, then if mptcp conn is closed by client,
client will send a DATA_FIN and a MPTCP FIN, the DATA_FIN
doesn't have MP_CAPABLE or MP_JOIN,
so mptcp_subflow_init_cookie_req() will return 0, and pass
the cookie check, MP_JOIN request is fallback to normal TCP.
Server will send a TCP FIN if closed, in client side,
when process TCP FIN, it will do reset, the code path is:
tcp_data_queue()->mptcp_incoming_options()
->check_fully_established()->mptcp_subflow_reset().
mptcp_subflow_reset() will set sock state to TCP_CLOSE,
so tcp_fin will hit TCP_CLOSE, and print the warning.
2.mptcp is in syncookie, and server recv 3rd-ack, in
mptcp_subflow_init_cookie_req(), mptcp_can_accept_new_subflow()
return false, and subflow_req->mp_join is not set to 1,
so in subflow_syn_recv_sock() will not reset the MP_JOIN
subflow, but fallback to normal TCP, and then the same thing
happens when server will send a TCP FIN if closed.
For case1, subflow_check_req() return -EPERM,
then tcp_conn_request() will drop MP_JOIN SYN.
For case2, let subflow_syn_recv_sock() call
mptcp_can_accept_new_subflow(), and do fatal fallback, send reset.
Fixes: 9466a1cceb ("mptcp: enable JOIN requests even if cookies are in use")
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In subflow_check_req(), if subflow sport is mismatch, will put msk,
destroy token, and destruct req, then return -EPERM, which can be
done by subflow_req_destructor() via:
tcp_conn_request()
|--__reqsk_free()
|--subflow_req_destructor()
So we should remove these redundant code, otherwise will call
tcp_v4_reqsk_destructor() twice, and may double free
inet_rsk(req)->ireq_opt.
Fixes: 5bc56388c7 ("mptcp: add port number check for MP_JOIN")
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since PTP virtual clock support is added, there can be
several PTP virtual clocks based on one PTP physical
clock for timestamping.
This patch is to extend SO_TIMESTAMPING API to support
PHC (PTP Hardware Clock) binding by adding a new flag
SOF_TIMESTAMPING_BIND_PHC. When PTP virtual clocks are
in use, user space can configure to bind one for
timestamping, but PTP physical clock is not supported
and not needed to bind.
This patch is preparation for timestamp conversion from
raw timestamp to a specific PTP virtual clock time in
core net.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Split timestamping handling into a new function
mptcp_setsockopt_sol_socket_timestamping().
This is preparation for extending SO_TIMESTAMPING
for PHC binding, since optval will no longer be
integer.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Trivial conflict in net/netfilter/nf_tables_api.c.
Duplicate fix in tools/testing/selftests/net/devlink_port_split.py
- take the net-next version.
skmsg, and L4 bpf - keep the bpf code but remove the flags
and err params.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch introduces a function wrapper to call the sk_error_report
callback. That will prepare to add additional handling whenever
sk_error_report is called, for example to trace socket errors.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Carpenter reported an issue introduced in
commit fde56eea01 ("mptcp: refine mptcp_cleanup_rbuf") where a new
boolean (ack_pending) is masked with 0x9.
This is not the intention to ignore values by using a boolean. This
variable should not have a 'bool' type: we should keep the 'u8' to allow
this comparison.
Fixes: fde56eea01 ("mptcp: refine mptcp_cleanup_rbuf")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The current cleanup rbuf tries a bit too hard to avoid acquiring
the subflow socket lock. We may end-up delaying the needed ack,
or skip acking a blocked subflow.
Address the above extending the conditions used to trigger the cleanup
to reflect more closely what TCP does and invoking tcp_cleanup_rbuf()
on all the active subflows.
Note that we can't replicate the exact tests implemented in
tcp_cleanup_rbuf(), as MPTCP lacks some of the required info - e.g.
ping-pong mode.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch added a new flag named deny_join_id0 in struct
mptcp_options_received. Set it when MP_CAPABLE with the flag
MPTCP_CAP_DENYJOIN_ID0 is received.
Also add a new flag remote_deny_join_id0 in struct mptcp_pm_data. When the
flag deny_join_id0 is set, set this remote_deny_join_id0 flag.
In mptcp_pm_create_subflow_or_signal_addr, if the remote_deny_join_id0 flag
is set, and the remote address id is zero, stop this connection.
Suggested-by: Florian Westphal <fw@strlen.de>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch defined a new flag MPTCP_CAP_DENY_JOIN_ID0 for the third bit,
labeled "C" of the MP_CAPABLE option.
Add a new flag allow_join_id0 in struct mptcp_out_options. If this flag is
set, send out the MP_CAPABLE option with the flag MPTCP_CAP_DENY_JOIN_ID0.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch added a new sysctl, named allow_join_initial_addr_port, to
control whether allow peers to send join requests to the IP address and
port number used by the initial subflow.
Suggested-by: Florian Westphal <fw@strlen.de>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit 7896248983 ("mptcp: add skeleton to sync msk socket
options to subflows") introduced a duplicate declaration of
mptcp_setsockopt(), just drop it.
Reported-by: Florian Westphal <fw@strlen.de>
Fixes: 7896248983 ("mptcp: add skeleton to sync msk socket options to subflows")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The msk socket state is currently updated in a few spots without
owning the msk socket lock itself.
Some of such operations are safe, as they happens before exposing
the msk socket to user-space and can't race with other changes.
A couple of them, at connect time, can actually race with close()
or shutdown(), leaving breaking the socket state machine.
This change addresses the issue moving such update under the msk
socket lock with the usual:
<acquire spinlock>
<check sk lock onwers>
<ev defer to release_cb>
scheme.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/56
Fixes: 8fd738049a ("mptcp: fallback in case of simultaneous connect")
Fixes: c3c123d16c ("net: mptcp: don't hang in mptcp_sendmsg() after TCP fallback")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Account this exceptional events for better introspection.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently we check the msk state to avoid enqueuing new
skbs at msk shutdown time.
Such test is racy - as we can't acquire the msk socket lock -
and useless, as the caller already checked the subflow
field 'disposable', covering the same scenario in a race
free manner - read and updated under the ssk socket lock.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If we don't flush entirely the receive queue, we need set
again such bit later. We can simply avoid clearing it.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are a bunch of callsite where the ssk socket
lock is acquired using the full-blown version eligible for
the fast variant. Let's move to the latter.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The mentioned cache was introduced to reduce the number of skb
allocation in atomic context, but the required complexity is
excessive.
This change remove the mentioned cache.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The current implementation of 32 bit DSN expansion is buggy.
After the previous patch, we can simply reuse the newly
introduced helper to do the expansion safely.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/120
Fixes: 648ef4b886 ("mptcp: Implement MPTCP receive path")
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When receiving 32 bits DSS ack from the peer, the MPTCP need
to expand them to 64 bits value. The current code is buggy
WRT detecting 32 bits ack wrap-around: when the wrap-around
happens the current unsigned 32 bit ack value is lower than
the previous one.
Additionally check for possible reverse wrap and make the helper
visible, so that we could re-use it for the next patch.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/204
Fixes: cc9d256698 ("mptcp: update per unacked sequence on pkt reception")
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Trivial conflicts in net/can/isotp.c and
tools/testing/selftests/net/mptcp/mptcp_connect.sh
scaled_ppm_to_ppb() was moved from drivers/ptp/ptp_clock.c
to include/linux/ptp_clock_kernel.h in -next so re-apply
the fix there.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch added a new sysctl, named checksum_enabled, to control
whether DSS checksum can be enabled.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch added the mib for the data checksum, MPTCP_MIB_DATACSUMERR.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If the MPTCP-level checksum is enabled, on re-injections we
must spool a complete DSS, or the receive side will not be
able to compute the csum and process any data.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch added three new members named data_csum, csum_len and
map_csum in struct mptcp_subflow_context, implemented a new function
named mptcp_validate_data_checksum().
If the current mapping is valid and csum is enabled traverse the later
pending skbs and compute csum incrementally till the whole mapping has
been covered. If not enough data is available in the rx queue, return
MAPPING_EMPTY - that is, no data.
Next subflow_data_ready invocation will trigger again csum computation.
When the full DSS is available, validate the csum and return to the
caller an appropriate error code, to trigger subflow reset of fallback
as required by the RFC.
Additionally:
- if the csum prevence in the DSS don't match the negotiated value e.g.
csum present, but not requested, return invalid mapping to trigger
subflow reset.
- keep some csum state, to avoid re-compute the csum on the same data
when multiple rx queue traversal are required.
- clean-up the uncompleted mapping from the receive queue on close, to
allow proper subflow disposal
Co-developed-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In mptcp_parse_option, adjust the expected_opsize, and always parse the
data checksum value from the receiving DSS regardless of csum presence.
Then save it in mp_opt->csum.
Co-developed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch added a new member named csum in struct mptcp_options_received.
When parsing the MP_CAPABLE with data, if the checksum is enabled,
adjust the expected_opsize. If the receiving option length matches the
length with the data checksum, get the checksum value and save it in
mp_opt->csum. And in mptcp_incoming_options, pass it to mpext->csum.
We always parse any csum/nocsum combination and delay the presence check
to later code, to allow reset if missing.
Additionally, in the TX path, use the newly introduce ext field to avoid
MPTCP csum recomputation on TCP retransmission and unneeded csum update
on when setting the data fin_flag.
Co-developed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch added a new flag csum_reqd in struct mptcp_options_received, if
the flag MPTCP_CAP_CHECKSUM_REQD is set in the receiving MP_CAPABLE
suboption, set this flag.
In mptcp_sk_clone and subflow_finish_connect, if the csum_reqd flag is set,
enable the msk->csum_enabled flag.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch added a new parameter name sk in mptcp_get_options().
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In mptcp_write_options, if the checksum is enabled, adjust the option
length and send out the data checksum with DSS suboption.
Co-developed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If the checksum is enabled, send out the data checksum with the
MP_CAPABLE suboption with data.
In mptcp_established_options_mp, save the data checksum in
opts->ext_copy.csum. In mptcp_write_options, adjust the option length and
send it out with the MP_CAPABLE suboption.
Co-developed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch added a new member csum_reqd in struct mptcp_out_options and
struct mptcp_subflow_request_sock. Initialized it with the helper
function mptcp_is_checksum_enabled().
In mptcp_write_options, if this field is enabled, send out the MP_CAPABLE
suboption with the MPTCP_CAP_CHECKSUM_REQD flag.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch added a new member named csum in struct mptcp_ext, implemented
a new function named mptcp_generate_data_checksum().
Generate the data checksum in mptcp_sendmsg_frag, save it in mpext->csum.
Note that we must generate the csum for zero window probe, too.
Do the csum update incrementally, to avoid multiple csum computation
when the data is appended to existing skb.
Note that in a later patch we will skip unneeded csum related operation.
Changes not included here to keep the delta small.
Co-developed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch added a new member named csum_enabled in struct mptcp_sock,
used a dummy mptcp_is_checksum_enabled() helper to initialize it.
Also added a new member named mptcpi_csum_enabled in struct mptcp_info
to expose the csum_enabled flag.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
warn_bad_map() produces a kernel WARN on bad input coming
from the network. Use pr_debug() to avoid spamming the system
log.
Additionally, when the right bound check fails, warn_bad_map() reports
the wrong ssn value, let's fix it.
Fixes: 648ef4b886 ("mptcp: Implement MPTCP receive path")
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/107
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently we rely on the subflow->data_avail field, which is subject to
races:
ssk1
skb len = 500 DSS(seq=1, len=1000, off=0)
# data_avail == MPTCP_SUBFLOW_DATA_AVAIL
ssk2
skb len = 500 DSS(seq = 501, len=1000)
# data_avail == MPTCP_SUBFLOW_DATA_AVAIL
ssk1
skb len = 500 DSS(seq = 1, len=1000, off =500)
# still data_avail == MPTCP_SUBFLOW_DATA_AVAIL,
# as the skb is covered by a pre-existing map,
# which was in-sequence at reception time.
Instead we can explicitly check if some has been received in-sequence,
propagating the info from __mptcp_move_skbs_from_subflow().
Additionally add the 'ONCE' annotation to the 'data_avail' memory
access, as msk will read it outside the subflow socket lock.
Fixes: 648ef4b886 ("mptcp: Implement MPTCP receive path")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If the host is under sever memory pressure, and RX forward
memory allocation for the msk fails, we try to borrow the
required memory from the ingress subflow.
The current attempt is a bit flaky: if skb->truesize is less
than SK_MEM_QUANTUM, the ssk will not release any memory, and
the next schedule will fail again.
Instead, directly move the required amount of pages from the
ssk to the msk, if available
Fixes: 9c3f94e168 ("mptcp: add missing memory scheduling in the rx path")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The TCP option parser in mptcp (mptcp_get_options) could read one byte
out of bounds. When the length is 1, the execution flow gets into the
loop, reads one byte of the opcode, and if the opcode is neither
TCPOPT_EOL nor TCPOPT_NOP, it reads one more byte, which exceeds the
length of 1.
This fix is inspired by commit 9609dad263 ("ipv4: tcp_input: fix stack
out of bounds when parsing TCP options.").
Cc: Young Xiao <92siuyang@gmail.com>
Fixes: cec37a6e41 ("mptcp: Handle MP_CAPABLE options for outgoing connections")
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds support for SO_TIMESTAMP(NS). Timestamps are passed to
userspace in the same way as for plain tcp sockets.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move the pre-check to the function that handles all SOL_SOCKET values.
At this point there is complete coverage for all values that were
accepted by the pre-check.
BUSYPOLL functions are accepted but will not have any functionality
yet until its clear how the expected mptcp behaviour should look like.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds support for TIMESTAMP(NS) setsockopt.
This doesn't make things work yet, because the mptcp receive path
doesn't convert the skb timestamps to cmsgs for userspace consumption.
receive path cmsg support is added ina followup patch.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To avoid confusions, it seems better to parse this sysctl parameter as a
boolean. We use it as a boolean, no need to parse an integer and bring
confusions if we see a value different from 0 and 1, especially with
this parameter name: enabled.
It seems fine to do this modification because the default value is 1
(enabled). Then the only other interesting value to set is 0 (disabled).
All other values would not have changed the default behaviour.
Suggested-by: Florian Westphal <fw@strlen.de>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since the introduction of the sysctl support in MPTCP with
commit 784325e9f0 ("mptcp: new sysctl to control the activation per NS"),
we don't check CONFIG_SYSCTL.
Until now, that was not an issue: the register and unregister functions
were replaced by NO-OP one if SYSCTL was not enabled in the config. The
only thing we could have avoid is not to reserve memory for the table
but that's for the moment only a small table per net-ns.
But the following commit is going to use SYSCTL_ZERO and SYSCTL_ONE
which are not be defined if SYSCTL is not enabled in the config. This
causes 'undefined reference' errors from the linker.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When add address with port, it is mean to create a listening socket,
and send an ADD_ADDR to remote, so it must have flag signal set,
add this check in mptcp_pm_parse_addr().
Fixes: a77e9179c7 ("mptcp: deal with MPTCP_PM_ADDR_ATTR_PORT in PM netlink")
Acked-by: Geliang Tang <geliangtang@gmail.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Memory of struct pm_nl_pernet{} is allocated by kzalloc()
in setup_net()->ops_init(), so it's no need to reset counters
and zero bitmap in pm_nl_init_net().
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For outgoing subflow join, when recv SYNACK, in subflow_finish_connect(),
the mptcp_finish_join() may return false in some cases, and send a RESET
to remote, and no local hmac is required.
So generate subflow hmac after mptcp_finish_join().
Fixes: ec3edaa7ca ("mptcp: Add handling of outgoing MP_JOIN requests")
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We have macro TOKEN_MAX_RETRIES for the number of token generate retries,
so using TOKEN_MAX_RETRIES in subflow_check_req().
And rename TOKEN_MAX_RETRIES to MPTCP_TOKEN_MAX_RETRIES as it is now
exposed.
Fixes: 535fb8152f ("mptcp: token: move retry to caller")
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After commit 2c5ebd001d ("mptcp: refactor token container"),
pr_debug() is called before mptcp_crypto_key_gen_sha() in
mptcp_token_new_connect(), so the output local_key, token and
idsn are 0, like:
MPTCP: ssk=00000000f6b3c4a2, local_key=0, token=0, idsn=0
Move pr_debug() after mptcp_crypto_key_gen_sha().
Fixes: 2c5ebd001d ("mptcp: refactor token container")
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When some mapping related errors occurs we close the main
MPC subflow with a RST. We should instead fallback gracefully
to TCP, and do the reset only for MPJ subflows.
Fixes: d22f4988ff ("mptcp: process MP_CAPABLE data option")
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/192
Reported-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In subflow_syn_recv_sock() we currently skip options parsing
for OoO packet, given that such packets may not carry the relevant
MPC option.
If the peer generates an MPC+data TSO packet and some of the early
segments are lost or get reorder, we server will ignore the peer key,
causing transient, unexpected fallback to TCP.
The solution is always parsing the incoming MPTCP options, and
do the fallback only for in-order packets. This actually cleans
the existing code a bit.
Fixes: d22f4988ff ("mptcp: process MP_CAPABLE data option")
Reported-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
MPTCP sk_forward_memory handling is a bit special, as such field
is protected by the msk socket spin_lock, instead of the plain
socket lock.
Currently we have a code path updating such field without handling
the relevant lock:
__mptcp_retrans() -> __mptcp_clean_una_wakeup()
Several helpers in __mptcp_clean_una_wakeup() will update
sk_forward_alloc, possibly causing such field corruption, as reported
by Matthieu.
Address the issue providing and using a new variant of blamed function
which explicitly acquires the msk spin lock.
Fixes: 64b9cea7a0 ("mptcp: fix spurious retransmissions")
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/172
Reported-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Tested-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
when Linux receives an echo-ed ADD_ADDR, it checks the IP address against
the list of "announced" addresses. In case of a positive match, the timer
that handles retransmissions is stopped regardless of the 'Address Id' in
the received packet: this behaviour does not comply with RFC8684 3.4.1.
Fix it by validating the 'Address Id' in received echo-ed ADD_ADDRs.
Tested using packetdrill, with the following captured output:
unpatched kernel:
Out <...> Flags [.], ack 1, win 256, options [mptcp add-addr v1 id 1 198.51.100.2 hmac 0xfd2e62517888fe29,mptcp dss ack 3007449509], length 0
In <...> Flags [.], ack 1, win 257, options [mptcp add-addr v1-echo id 1 1.2.3.4,mptcp dss ack 3013740213], length 0
Out <...> Flags [.], ack 1, win 256, options [mptcp add-addr v1 id 1 198.51.100.2 hmac 0xfd2e62517888fe29,mptcp dss ack 3007449509], length 0
In <...> Flags [.], ack 1, win 257, options [mptcp add-addr v1-echo id 90 198.51.100.2,mptcp dss ack 3013740213], length 0
^^^ retransmission is stopped here, but 'Address Id' is 90
patched kernel:
Out <...> Flags [.], ack 1, win 256, options [mptcp add-addr v1 id 1 198.51.100.2 hmac 0x1cf372d59e05f4b8,mptcp dss ack 3007449509], length 0
In <...> Flags [.], ack 1, win 257, options [mptcp add-addr v1-echo id 1 1.2.3.4,mptcp dss ack 1672384568], length 0
Out <...> Flags [.], ack 1, win 256, options [mptcp add-addr v1 id 1 198.51.100.2 hmac 0x1cf372d59e05f4b8,mptcp dss ack 3007449509], length 0
In <...> Flags [.], ack 1, win 257, options [mptcp add-addr v1-echo id 90 198.51.100.2,mptcp dss ack 1672384568], length 0
Out <...> Flags [.], ack 1, win 256, options [mptcp add-addr v1 id 1 198.51.100.2 hmac 0x1cf372d59e05f4b8,mptcp dss ack 3007449509], length 0
In <...> Flags [.], ack 1, win 257, options [mptcp add-addr v1-echo id 1 198.51.100.2,mptcp dss ack 1672384568], length 0
^^^ retransmission is stopped here, only when both 'Address Id' and 'IP Address' match
Fixes: 00cfd77b90 ("mptcp: retransmit ADD_ADDR when timeout")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Another left-over. Avoid flooding dmesg with useless text,
we already have a MIB for that event.
Fixes: 648ef4b886 ("mptcp: Implement MPTCP receive path")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is a left-over of early day. A malicious peer can flood
the kernel logs with useless messages, just drop it.
Fixes: f296234c98 ("mptcp: Add handling of incoming MP_JOIN requests")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We can't use tcp_set_congestion_control() on an mptcp socket, as
such function can end-up accessing a tcp-specific field -
prior_ssthresh - causing an OOB access.
To allow propagating the correct ca algo on subflow, cache the ca
name at initialization time.
Additionally avoid overriding the user-selected CA (if any) at
clone time.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/182
Fixes: aa1fbd94e5 ("mptcp: sockopt: add TCP_CONGESTION and TCP_INFO")
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Maxim reported several issues when forcing a TCP transparent proxy
to use the MPTCP protocol for the inbound connections. He also
provided a clean reproducer.
The problem boils down to 'mptcp_frag_can_collapse_to()' assuming
that only MPTCP will use the given page_frag.
If others - e.g. the plain TCP protocol - allocate page fragments,
we can end-up re-using already allocated memory for mptcp_data_frag.
Fix the issue ensuring that the to-be-expanded data fragment is
located at the current page frag end.
v1 -> v2:
- added missing fixes tag (Mat)
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/178
Reported-and-tested-by: Maxim Galaganov <max@internet.ru>
Fixes: 18b683bff8 ("mptcp: queue data for mptcp level retransmission")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If userspace exits before calling accept() on a listener that had at least
one new connection ready, we get:
Attempt to release TCP socket in state 8
This happens because the mptcp socket gets cloned when the TCP connection
is ready, but the socket is never exposed to userspace.
The client additionally sends a DATA_FIN, which brings connection into
CLOSE_WAIT state. This in turn prevents the orphan+state reset fixup
in mptcp_sock_destruct() from doing its job.
Fixes: 3721b9b646 ("mptcp: Track received DATA_FIN sequence number and add related helpers")
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/185
Tested-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Link: https://lore.kernel.org/r/20210507001638.225468-1-mathew.j.martineau@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds support for MSG_PEEK flag. Packets are not removed
from the receive_queue if MSG_PEEK set in recv() system call.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Yonglong Li <liyonglong@chinatelecom.cn>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently mptcp_sendmsg() fails with EOPNOTSUPP if the
user-space provides some unsupported flag. That is unexpected
and may foul existing applications migrated to MPTCP, which
expect a different behavior.
Change the mentioned function to silently ignore the unsupported
flags except MSG_FASTOPEN. This is the only flags currently not
supported by MPTCP with user-space visible side-effects.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/162
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The mentioned flag is currently silenlty ignored. This
change implements the TCP-like behaviour, dropping the
pending data up to the specified length.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Sigend-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
mptcp_recvmsg() currently silently ignores MSG_ERRQUEUE, returning
input data instead of error cmsg.
This change provides a dummy implementation for MSG_ERRQUEUE - always
returns no data. That is consistent with the current lack of a suitable
IP_RECVERR setsockopt() support.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
With this change, the MPTCP-level retransmission timer is used to resend
DATA_FIN. The retranmit timer is not stopped while waiting for a
MPTCP-level ACK of DATA_FIN, and retransmitted DATA_FINs are sent on all
subflows. The retry interval starts at TCP_RTO_MIN and then doubles on
each attempt, up to TCP_RTO_MAX.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/146
Fixes: 43b54c6ee3 ("mptcp: Use full MPTCP-level disconnect state machine")
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch used the macro helper mptcp_for_each_subflow() instead of
list_for_each_entry() in mptcp_close.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch added a tracepoint in subflow_check_data_avail() to show the
mapping status.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch added a tracepoint in ack_update_msk() to track the
incoming data_ack and window/snd_una updates.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch added a tracepoint in the mapping status function
get_mapping_status() to dump every mpext field.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch added a tracepoint in the packet scheduler function
mptcp_subflow_get_send().
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch moved the static function mptcp_subflow_active to protocol.h
as an inline one.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some of the sequence numbers are printed as the negative ones in the debug
log:
[ 46.250932] MPTCP: DSS
[ 46.250940] MPTCP: data_fin=0 dsn64=0 use_map=0 ack64=1 use_ack=1
[ 46.250948] MPTCP: data_ack=2344892449471675613
[ 46.251012] MPTCP: msk=000000006e157e3f status=10
[ 46.251023] MPTCP: msk=000000006e157e3f snd_data_fin_enable=0 pending=0 snd_nxt=2344892449471700189 write_seq=2344892449471700189
[ 46.251343] MPTCP: msk=00000000ec44a129 ssk=00000000f7abd481 sending dfrag at seq=-1658937016627538668 len=100 already sent=0
[ 46.251360] MPTCP: data_seq=16787807057082012948 subflow_seq=1 data_len=100 dsn64=1
This patch used the format specifier %u instead of %d for the unsigned int
values to fix it.
Fixes: d9ca1de8c0 ("mptcp: move page frag allocation in mptcp_sendmsg()")
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Drop 'S' from end of CONFIG_MPTCP_KUNIT_TESTS in order to adhere to the
KUNIT *_KUNIT_TEST config name format.
Fixes: a00a582203 (mptcp: move crypto test to KUNIT)
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Nico Pache <npache@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
TCP_CONGESTION is set for all subflows.
The mptcp socket gains icsk_ca_ops too so it can be used to keep the
authoritative state that should be set on new/future subflows.
TCP_INFO will return first subflow only.
The out-of-tree kernel has a MPTCP_INFO getsockopt, this could be added
later on.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Handle SO_DEBUG and set it on all subflows.
Ignore those values not implemented on TCP sockets.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replicate to all subflows.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Value is synced to all subflows.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Similar to PRIORITY/KEEPALIVE: needs to be mirrored to all subflows.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Similar to previous patch: needs to be mirrored to all subflows.
Device bind is simpler: it is only done on the initial (listener) sk.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
start with something simple: both take an integer value, both
need to be mirrored to all subflows.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Abeni suggested to avoid re-syncing new subflows because
they inherit options from listener. In case options were set on
listener but are not set on mptcp-socket there is no need to
do any synchronisation for new subflows.
This change sets sockopt_seq of new mptcp sockets to the seq of
the mptcp listener sock.
Subflow sequence is set to the embedded tcp listener sk.
Add a comment explaing why sk_state is involved in sockopt_seq
generation.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Handle following cases:
1. setsockopt is called with multiple subflows.
Change might have to be mirrored to all of them.
This is done directly in process context/setsockopt call.
2. Outgoing subflow is created after one or several setsockopt()
calls have been made. Old setsockopt changes should be
synced to the new socket.
3. Incoming subflow, after setsockopt call(s).
Cases 2 and 3 are handled right after the join list is spliced to the conn
list.
Not all sockopt values can be just be copied by value, some require
helper calls. Those can acquire socket lock (which can sleep).
If the join->conn list splicing is done from preemptible context,
synchronization can be done right away, otherwise its deferred to work
queue.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Unrolling mcast state at msk dismantel time is bug prone, as
syzkaller reported:
======================================================
WARNING: possible circular locking dependency detected
5.11.0-syzkaller #0 Not tainted
------------------------------------------------------
syz-executor905/8822 is trying to acquire lock:
ffffffff8d678fe8 (rtnl_mutex){+.+.}-{3:3}, at: ipv6_sock_mc_close+0xd7/0x110 net/ipv6/mcast.c:323
but task is already holding lock:
ffff888024390120 (sk_lock-AF_INET6){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1600 [inline]
ffff888024390120 (sk_lock-AF_INET6){+.+.}-{0:0}, at: mptcp6_release+0x57/0x130 net/mptcp/protocol.c:3507
which lock already depends on the new lock.
Instead we can simply forbid any mcast-related setsockopt.
Let's do the same with all other non supported sockopts.
Fixes: 717e79c867 ("mptcp: Add setsockopt()/getsockopt() socket operations")
Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The MPTCP sockopt implementation is going to be much
more big and complex soon. Let's move it to a different
source file.
No functional change intended.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This change reverts commit 86581852d7 ("mptcp: forbit mcast-related sockopt on MPTCP sockets").
As announced in the cover letter of the mentioned patch above, the
following commits introduce a larger MPTCP sockopt implementation
refactor.
This time, we switch from a blocklist to an allowlist. This is safer for
the future where new sockoptions could be added while not being fully
supported with MPTCP sockets and thus causing unstabilities.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Conflicts:
MAINTAINERS
- keep Chandrasekar
drivers/net/ethernet/mellanox/mlx5/core/en_main.c
- simple fix + trust the code re-added to param.c in -next is fine
include/linux/bpf.h
- trivial
include/linux/ethtool.h
- trivial, fix kdoc while at it
include/linux/skmsg.h
- move to relevant place in tcp.c, comment re-wrapped
net/core/skmsg.c
- add the sk = sk // sk = NULL around calls
net/tipc/crypto.c
- trivial
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Current Linux carries echo-ed ADD_ADDR over pure TCP ACKs, so there is no
need to add a DSS element that would fit only ADD_ADDR with IPv4 address.
Drop the DSS from echo-ed ADD_ADDR, regardless of the IP version.
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The length of the IPv4 address is 4 octets and IPv6 is 16. That's the only
difference between add_addr_generate_hmac and add_addr6_generate_hmac.
This patch dropped the duplicate code and unify them into one.
Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since the type of the address family in struct mptcp_options_received
became sa_family_t, we should set AF_INET/AF_INET6 to it, instead of
using MPTCP_ADDR_IPVERSION_4/6.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch added a new struct mptcp_addr_info member addr in struct
mptcp_options_received, and dropped the original family, addr_id, addr,
addr6 and port fields in it. Then we can pass the parameter mp_opt.addr
directly to mptcp_pm_add_addr_received and mptcp_pm_add_addr_echoed.
Since the port number became big-endian now, use htons to convert the
incoming port number to it. Also use ntohs to convert it when passing
it to add_addr_generate_hmac or printing it out.
Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since the family field was added in struct mptcp_out_options, no need to
use OPTION_MPTCP_ADD_ADDR6 to identify the IPv6 address. Drop it.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch moved the mptcp_addr_info struct from protocol.h to mptcp.h,
added a new struct mptcp_addr_info member addr in struct mptcp_out_options,
and dropped the original addr, addr6, addr_id and port fields in it. Then
we can use opts->addr to get the adding address from PM directly using
mptcp_pm_add_addr_signal.
Since the port number became big-endian now, use ntohs to convert it
before sending it out with the ADD_ADDR suboption. Also convert it
when passing it to add_addr_generate_hmac or printing it out.
Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch moved the flags and ifindex fields from struct mptcp_addr_info
to struct mptcp_pm_addr_entry. Add the flags and ifindex values as two new
parameters to __mptcp_subflow_connect.
In mptcp_pm_create_subflow_or_signal_addr, pass the local address entry's
flags and ifindex fields to __mptcp_subflow_connect.
In mptcp_pm_nl_add_addr_received, just pass two zeros to it.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The MPTCP reset option allows to carry a mptcp-specific error code that
provides more information on the nature of a connection reset.
Reset option data received gets stored in the subflow context so it can
be sent to userspace via the 'subflow closed' netlink event.
When a subflow is closed, the desired error code that should be sent to
the peer is also placed in the subflow context structure.
If a reset is sent before subflow establishment could complete, e.g. on
HMAC failure during an MP_JOIN operation, the mptcp skb extension is
used to store the reset information.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently we explicitly check for the first subflow being
NULL in a couple of places, even if we don't need any
special actions in such scenario.
Just drop the unneeded checks, to avoid confusion.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We are not currently tracking the active MPTCP connection
attempts. Let's add the related counters.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If the MPTCP protocol is unable to create a new token,
the socket fallback to plain TCP, let's keep track
of such events via a specific MIB.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This change reverts commit ad98dd3705 ("mptcp: provide subflow aware
release function"). The latter introduced a deadlock spotted by
syzkaller and is not needed anymore after the previous commit.
Fixes: ad98dd3705 ("mptcp: provide subflow aware release function")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Unrolling mcast state at msk dismantel time is bug prone, as
syzkaller reported:
======================================================
WARNING: possible circular locking dependency detected
5.11.0-syzkaller #0 Not tainted
------------------------------------------------------
syz-executor905/8822 is trying to acquire lock:
ffffffff8d678fe8 (rtnl_mutex){+.+.}-{3:3}, at: ipv6_sock_mc_close+0xd7/0x110 net/ipv6/mcast.c:323
but task is already holding lock:
ffff888024390120 (sk_lock-AF_INET6){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1600 [inline]
ffff888024390120 (sk_lock-AF_INET6){+.+.}-{0:0}, at: mptcp6_release+0x57/0x130 net/mptcp/protocol.c:3507
which lock already depends on the new lock.
Instead we can simply forbit any mcast-related setsockopt
Fixes: 717e79c867 ("mptcp: Add setsockopt()/getsockopt() socket operations")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch added a new function mptcp_nl_remove_id_zero_address to
remove the id 0 address.
In this function, traverse all the existing msk sockets to find the
msk matched the input IP address. Then fill the removing list with
id 0, and pass it to mptcp_pm_remove_addr and mptcp_pm_remove_subflow.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Suggested-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are some duplicate code in mptcp_pm_nl_rm_addr_received and
mptcp_pm_nl_rm_subflow_received. This patch unifies them into a new
function named mptcp_pm_nl_rm_addr_or_subflow. In it, use the input
parameter rm_type to identify it's now removing an address or a subflow.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There's only one subflow involving the non-zero id address, but there
may be multi subflows involving the id 0 address.
Here's an example:
local_id=0, remote_id=0
local_id=1, remote_id=0
local_id=0, remote_id=1
If the removing address id is 0, all the subflows involving the id 0
address need to be removed.
In mptcp_pm_nl_rm_addr_received/mptcp_pm_nl_rm_subflow_received, the
"break" prevents the iteration to the next subflow, so this patch
dropped them.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since mptcp_pm_nl_add_addr_send_ack is now used for both ADD_ADDR and
RM_ADDR cases, rename it to mptcp_pm_nl_addr_send_ack.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch changes the sending ACK conditions for the ADD_ADDR, send an
ACK packet for RM_ADDR too.
In mptcp_pm_remove_addr, invoke mptcp_pm_nl_add_addr_send_ack to send
the ACK packet.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
msk->pm.addr_signal is cleared in mptcp_pm_add_addr_signal, no need to
clear it in mptcp_pm_nl_add_addr_send_ack again. Drop it.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When an invalid address was announced, the subflow couldn't be created
for this address. Therefore mptcp_pm_nl_subflow_established couldn't be
invoked. Then the next addresses in the local address list didn't have a
chance to be announced.
This patch invokes the new function mptcp_pm_add_addr_echoed when the
address is echoed. In it, use mptcp_lookup_anno_list_by_saddr to check
whether this address is in the anno_list. If it is, PM schedules the
status MPTCP_PM_SUBFLOW_ESTABLISHED to invoke
mptcp_pm_create_subflow_or_signal_addr to deal with the next address in
the local address list.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch exported the static function lookup_anno_list_by_saddr, and
renamed it to mptcp_lookup_anno_list_by_saddr.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Abeni