Commit graph

233 commits

Author SHA1 Message Date
Michal Marek
3cebbb81c7 kconfig: Simplify LSMOD= handling
Signed-off-by: Michal Marek <mmarek@suse.cz>
LKML-Reference: <20100203162014.GA10956@sepie.suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-02-03 11:45:25 -05:00
Steven Rostedt
615f0833aa kconfig: Add LSMOD=file to override the lsmod for localmodconfig
Doing the following:

	make LSMOD=file localmodconfig

Will make the streamline-config code use the given file instead of
lsmod. If the file is an executable, it will execute it, otherwise
it will read it as text.

	make LSMOD=/my/local/path/lsmod localmodconfig

The above will execute the lsmod in /my/local/path instead of the
lsmods that may be located elsewhere.

	make LSMOD=embedded_board_lsmod localmodconfig

The above will read the "embedded_board_lsmod" as a text file. This
is useful if you are doing a cross compile and need to run the
config against modules that exist on an embedded device.

Note, if the LSMOD= file does is not a path, it will add the
path to the object directory. That is, the above example will look
for "embedded_board_lsmod" in the directory that the binary will
be built in (the O=dir directory).

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

 On branch config/linus
2010-02-02 21:58:00 -05:00
Steven Rostedt
88f66ea98d kconfig: Look in both /bin and /sbin for lsmod in streamline_config.pl
Distributions now have lsmod in /bin instead of /sbin. But to handle
both cases, we look for it in /sbin /bin /usr/bin and /usr/sbin.
If lsmod is not found in any of those paths, it defaults to use
just lsmod and hopes that it lies in the path of the user.

Tested-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-02-02 13:01:01 -05:00
Steven Rostedt
13d7e93856 kconfig: Check for if conditions in Kconfig for localmodconfig
The streamline_config.pl misses the if conditions for checking
dependencies. For Kconfigs with the following construct:

 if MEDIA_SUPPORT

 config VIDEO_DEV

 [...]

If VIDEO_DEV was enabled, the script will miss the fact that MEDIA_SUPPORT
is also needed.

This patch changes streamline_config.pl to include if conditions into
the dependencies of configs.

Reported-by: Anton Blanchard <anton@sambo.org>
Tested-by: Anton Blanchard <anton@sambo.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-01-06 17:56:12 -05:00
Steven Rostedt
17263baf95 kconfig: Create include/generated for localmodconfig
If someone downloads a brand new kernel and runs localmodconfig or
localyesconfig, the ending result will report:

 *** Error during update of the kernel configuration.

This is because localmodconfig and localyesconfig must create the
include/generated directory to place the autoconf.h file.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-01-06 16:43:08 -05:00
Michal Marek
bc081dd6e9 kbuild: generate modules.builtin
To make it easier for module-init-tools and scripts like mkinitrd to
distinguish builtin and missing modules, install a modules.builtin file
listing all builtin modules. This is done by generating an additional
config file (tristate.conf) with tristate options set to uppercase 'Y'
or 'M'. If we source that config file, the builtin modules appear in
obj-Y.

Signed-off-by: Michal Marek <mmarek@suse.cz>
2009-12-12 13:08:16 +01:00
Michal Marek
32197c7ffb kbuild: create include/generated in silentoldconfig
The toplevel Makefile creates the directory if it runs silentoldconfig
automatically, but if run manually, it fails:

  $ make mrproper
  $ make defconfig && make silentoldconfig
  *** Default configuration is based on 'x86_64_defconfig'
  #
  # configuration written to .config
  #
  scripts/kconfig/conf -s arch/x86/Kconfig

  *** Error during update of the kernel configuration.
  ...

Move the mkdir command to the silentoldconfig target to make it work.

Signed-off-by: Michal Marek <mmarek@suse.cz>
2009-12-12 13:08:16 +01:00
Sam Ravnborg
264a268380 kbuild: move autoconf.h to include/generated
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2009-12-12 13:08:15 +01:00
Jiri Kosina
d014d04386 Merge branch 'for-next' into for-linus
Conflicts:

	kernel/irq/chip.c
2009-12-07 18:36:35 +01:00
André Goddard Rosa
af901ca181 tree-wide: fix assorted typos all over the place
That is "success", "unknown", "through", "performance", "[re|un]mapping"
, "access", "default", "reasonable", "[con]currently", "temperature"
, "channel", "[un]used", "application", "example","hierarchy", "therefore"
, "[over|under]flow", "contiguous", "threshold", "enough" and others.

Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-12-04 15:39:55 +01:00
Steven Rostedt
463bf90007 kconfig: Fix make O=<dir> local{mod,yes}config
When the output directory is something other than the kernel source,
the streamline_config script gets confused. This patch passes in the
source directory to the script so that it can find the proper files.

Reported-by: Peter Zijlstra <peterz@infradead.org>
Tested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-11-20 09:45:55 -05:00
Josh Triplett
6516657180 kconfig: Mark various internal functions static
kconfig's keyword hash, lexer, and parser define various functions used
only locally.  Declare these functions as static, and regenerate the
corresponding generated files.

Signed-off-by: Josh Triplett <josh@joshtriplett.org>
2009-11-15 15:00:16 -08:00
Josh Triplett
1456edbb14 kconfig: Make zconf.y work with current bison
zconf.y includes zconf.hash.c from the initial code section.
zconf.hash.c references the token constants from zconf.y.  However,
current bison defines the token constants after the initial code
section, making zconf.hash.c fail to compile.  Move the include of
zconf.hash.c later in zconf.y, so bison puts it after the token
constants.

Signed-off-by: Josh Triplett <josh@joshtriplett.org>
2009-10-15 11:10:12 -07:00
Trevor Keith
4356f48907 kbuild: add static to prototypes
Warnings found via gcc -Wmissing-prototypes.

Signed-off-by: Trevor Keith <tsrk@tsrk.net>
Acked-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-09-20 12:27:44 +02:00
Diego Elio 'Flameeyes' Pettenò
78222caaee gconfig: disable "typeahead find" search in treeviews
When typeahead find is enabled, using 'y', 'n' and 'm' to change the status
of the configuration items will also start up the search system, making you
jump around the configuration.

Disabling the enable_search property does not mean that search is not
possible, it only disables the typeahead; to execute a search in the
treeview, you can just call it up explicitly (i.e.: on most systems that
will be Ctrl-f).

Signed-off-by: Diego Elio 'Flameeyes' Pettenò  <flameeyes@gmail.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-09-20 12:27:43 +02:00
Cheng Renquan
4779105e03 kconfig: make use of menu_get_ext_help in gconfig
Futhermore, gconfig interface lack the "search a symbol" function, do later.

Signed-off-by: Cheng Renquan <crquan@gmail.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
[sam: fix SEGV in gconfig]
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-09-20 12:27:42 +02:00
Cheng Renquan
66c4bd8085 kconfig: make use of menu_get_ext_help in "make config"
Signed-off-by: Cheng Renquan <crquan@gmail.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-09-20 12:27:42 +02:00
Cheng Renquan
d74c15f3b7 kconfig: make use of menu_get_ext_help in qconfig
Signed-off-by: Cheng Renquan <crquan@gmail.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-09-20 12:27:41 +02:00
Cheng Renquan
1d525e7c1f kconfig: make use of menu_get_ext_help in menuconfig
The removed functions are moved into menu.c for sharing with
gconfig & xconfig & config.

Signed-off-by: Cheng Renquan <crquan@gmail.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-09-20 12:27:41 +02:00
Cheng Renquan
6bd5999d1a kconfig: add menu_get_ext_help function to display more information
The three functions are moved from mconf.c, then they can be shared in
all menuconfig & gconfig & xconfig & config.

  +void menu_get_ext_help(struct menu *menu, struct gstr *help)
  +static void get_prompt_str(struct gstr *r, struct property *prop)
  +void get_symbol_str(struct gstr *r, struct symbol *sym)

Signed-off-by: Cheng Renquan <crquan@gmail.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-09-20 12:27:41 +02:00
Cheng Renquan
544e433a9e kconfig: add symbol value to help find the real depend
Sometimes when configuring need to disable some unused item, but the item is
selected by many other items, it's hard to find the real dependency which
selected it, This patch add every symbol's value accompanied to make it
possible to find the real dependency easily.

An example is CONFIG_RFKILL,

  ---------------------- RF switch subsystem support ----------------------
  | CONFIG_RFKILL:                                                        |
  |                                                                       |
  | Say Y here if you want to have control over RF switches               |
  | found on many WiFi and Bluetooth cards.                               |
  |                                                                       |
  | To compile this driver as a module, choose M here: the                |
  | module will be called rfkill.                                         |
  |                                                                       |
  | Symbol: RFKILL [=m]                                                   |
  | Prompt: RF switch subsystem support                                   |
  |   Defined at net/rfkill/Kconfig:4                                     |
  |   Depends on: NET [=y]                                                |
  |   Location:                                                           |
  |     -> Networking support (NET [=y])                                  |
  |   Selected by: IWLCORE [=n] && NETDEVICES [=y] && !S390 [=S390] && PC |
  |                                                                       |
  ----------------------------------------------------------------( 99%)---

Signed-off-by: Cheng Renquan <crquan@gmail.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-09-20 12:27:41 +02:00
Steven Rostedt
48586218b6 kconfig: add missing dependency of conf to localyesconfig
There's a dependency missing.

$ make localyesconfig
  HOSTCC  scripts/basic/fixdep
  HOSTCC  scripts/basic/docproc
  HOSTCC  scripts/basic/hash
using config: '/boot/config-2.6.27.25-78.2.56.fc9.x86_64'
/bin/sh: line 8: scripts/kconfig/conf: No such file or directory
make[1]: *** [localyesconfig] Error 127
make: *** [localyesconfig] Error 2

Thus the script failed to run. But the sed command that converts the '=m'
to '=y' still ran. This gives us a distro config with all modules
converted to built in!

The missing dependency was for conf for localyesconfig. This
dependency was already set for localmodconfig.

Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-08-21 12:42:20 -04:00
Steven Rostedt
a7c02602a8 kconfig: test if a .config already exists
If one were to run localmodconfig or localyesconfig without having
a .config already in the file, then the end of the process would give
a warning when it tries to move the old .config to .config.old.

This patch adds a test to check if .config exists and avoid the moves
if it does not.

[ Impact: remove warning after make localmodconfig ]

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-08-18 22:15:55 -04:00
Steven Rostedt
a9024838d0 kconfig: make local .config default for streamline_config
As Andi Kleen pointed out, most people would expect that the local .config
file to be based for a streamline config. This patch changes the order
of searching for a config file to consider the .config in the local
directory first.

Reported-by: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-08-18 22:04:05 -04:00
Steven Rostedt
810b2be656 kconfig: test for /boot/config-uname after /proc/config.gz in localconfig
Many distros put their config in /boot/config-`uname -r`, add a check
for that right after /proc/config.gz

Reported-by: Alan Jenkins <sourcejedi.lkml@googlemail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-08-18 22:03:45 -04:00
Steven Rostedt
d08ca2771e kconfig: unset IKCONFIG_PROC and clean up nesting
Due to cut and paste error IKCONFIG was both set and cleared.
It was suppose to be IKCONFIG_PROC to be cleared.

Also cleaned up if nesting.

Reported-by: Alan Jenkins <sourcejedi.lkml@googlemail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-08-18 22:02:40 -04:00
Steven Rostedt
cdfc47950a kconfig: search for a config to base the local(mod|yes)config on
Instead of using the .config in the local directory. This patch
changes streamline_config.pl to search various locations for a config.

Here's the list and order of search:

  /proc/config.gz
  /boot/vmlinuz-`uname -r`
  vmlinux  # local to the directory
  /lib/modules/`uname -r`/kernel/kernel/configs.ko
  kernel/configs.ko
  kernel/configs.o
  .config

Once it finds a file that contains a config (it checks if the binary
objects have configs first) it then uses it to create the .config
with minimum modules needed.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-08-18 22:02:00 -04:00
Steven Rostedt
744ffcbe86 kconfig: enable CONFIG_IKCONFIG from streamline_config.pl
Ingo Molnar suggested that the streamline_config.pl should enable
CONFIG_IKCONFIG to keep the current config in the kernel.
Then we can use scripts/extract-ikconfig to find the current
modules.

This patch changes streamline_config.pl to check if CONFIG_IKCONFIG
is not set, and if it is not, it enables it to be a module.

[ Impact: make current config options easier to find ]

Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-08-18 21:58:54 -04:00
Steven Rostedt
ea2c1894b6 kconfig: do not warn about modules built in
The streamline_config.pl finds all the configs that are needed to
compile the currently loaded modules. After it creates the .config
file, it tests to make sure all the configs that are needed were
set.

It only looks at the configs that are modules, it does not look
at the builtin configs. This causes unnecessary warnings about modules
not being covered.

Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-08-18 21:58:41 -04:00
Steven Rostedt
74398d3224 kconfig: streamline_config.pl do not stop with no depends
If a config does not have a prompt, it must be selected.
streamline_config.pl keeps track of all configs that select other configs.
If a config that does not have a prompt needs to be set to enable a
current module, it will include all configs that select it.
Note, streamline_config.pl does not enable modules that are not already
enabled. It only keeps enabled those that were enabled and might be
needed to compile the current modules.

The code to find the selects of a config is after the code that
adds the depends. But if a config needed selects but had no dependencies,
it would not be set. Because the code would stop before getting to
the select.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-08-18 21:56:31 -04:00
Steven Rostedt
281c9dadc3 kconfig: add make localyesconfig option
This adds the option localyesconfig to make. This is similar to
localmodconfig, but after it removes unnecessary modules it runs

  sed -i s/=m/=y/

on the .config file. It then runs "make silentoldconfig" to fix any
wholes that were created by the conversion of modules to core.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-08-18 21:55:49 -04:00
Steven Rostedt
03fa25da83 kconfig: make localmodconfig to run streamline_config.pl
Running the streamline_config.pl script manually can still be confusing
for some users. This patch adds the localmodconfig option. This will
automatically run streamline_config.pl on the current .config and
then run "make silentoldconfig" to fix any wholes that might have been
created.

 $ make localmodconfig

This will remove any module configurations in .config that are not needed
to compile the modules that are loaded.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-08-18 21:54:28 -04:00
Steven Rostedt
dcc60243e7 kconfig: add streamline_config.pl to scripts
streamline_config.pl is a very powerful tool. For those that install
a kernel to a new box using the config file from the distribution know that
it can take forever to compile the kernel.

Making a custom config file that will still boot your box, but bring
down the compile time of the kernel can be quit painful, and to ask
someone that reported a bug to do this can be a large burdon since that
person may not even know how to build a kernel.

This script will perform "lsmod" to find all the modules loaded on the
current running system. It will read all the Makefiles to map which
CONFIG enables a module. It will read the Kconfig files to find the
dependencies and selects that may be needed to support a CONFIG.
Finally, it reads the .config file and removes any module "=m" that is
not needed to enable the currently loaded modules. The output goes to
standard out.

Here's a way to run the script. From the Linux directory that holds
a distribution .config.

 $ scripts/kconfig/streamline_config.pl arch/x86/Kconfig > config-sl
 $ mv .config config-save
 $ mv config-sl .config
 $ make oldconfig

Now you have a .config that will still build all your modules, but also
take much less time to build the kernel.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-08-18 21:49:43 -04:00
Arnaud Lacombe
d0e1e09568 kconfig: initialize the screen before using curses(3) functions
This is needed on non ncurses based implementation to get a properly
initialized `stdscr' in main().

Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-07-17 23:06:08 +02:00
Arnaud Lacombe
668cdedfdb kconfig: variable argument lists needs `stdarg.h'
Fix build on non GNU based platforms.

Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-07-17 23:05:05 +02:00
Markus Heidelberg
12122f6232 kconfig: do not hardcode "include/config/auto.conf" filename
Regardless of KCONFIG_AUTOCONFIG, the filename written as a Make target
into "include/config/auto.conf.cmd" was always the default one.

Of course this doesn't make it work for the Kernel kbuild system, since
there the filename is hardcoded at several places in the Makefiles.

Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-06-09 22:37:51 +02:00
Markus Heidelberg
284026cdfb kconfig: do not hardcode ".config" filename
Rather than hardcoding ".config" use conf_get_configname(), which also
respects the environment variable KCONFIG_CONFIG.

This fixes "make silentoldconfig" when KCONFIG_CONFIG is used and also
suggests the given filename for "Load" and "Save as" in qconf.

Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-06-09 22:37:51 +02:00
Markus Heidelberg
8d90c97e46 kconfig qconf: fix the type of the desktop widget
QApplication::desktop() returns a pointer to QDesktopWidget, not to
QWidget.

Fixes the following compiler error after a quick conversion with 'qt3to4',
which occured with g++ 3.4.6 and 4.1.2, but not anymore with 4.3.2.

scripts/kconfig/qconf.cc: In constructor 'ConfigMainWindow::ConfigMainWindow()':
scripts/kconfig/qconf.cc:1289: error: cannot convert 'QDesktopWidget*' to 'QWidget*' in initialization

Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-06-09 22:37:50 +02:00
Markus Heidelberg
fbb8637444 kconfig qconf: add namespace for use of Key_ enum values
They are defined in the 'Qt' namespace.

Fixes the following compiler errors after a quick conversion with 'qt3to4',
which occured with g++ 3.4.6 and 4.1.2, but not anymore with 4.3.2.

scripts/kconfig/qconf.cc: In member function 'virtual void ConfigLineEdit::keyPressEvent(QKeyEvent*)':
scripts/kconfig/qconf.cc:311: error: 'Key_Escape' was not declared in this scope
scripts/kconfig/qconf.cc:313: error: 'Key_Return' was not declared in this scope
scripts/kconfig/qconf.cc:314: error: 'Key_Enter' was not declared in this scope

scripts/kconfig/qconf.cc: In member function 'virtual void ConfigList::keyPressEvent(QKeyEvent*)':
scripts/kconfig/qconf.cc:653: error: 'Key_Escape' was not declared in this scope
scripts/kconfig/qconf.cc:666: error: 'Key_Return' was not declared in this scope
scripts/kconfig/qconf.cc:667: error: 'Key_Enter' was not declared in this scope
scripts/kconfig/qconf.cc:681: error: 'Key_Space' was not declared in this scope
scripts/kconfig/qconf.cc:684: error: 'Key_N' was not declared in this scope
scripts/kconfig/qconf.cc:687: error: 'Key_M' was not declared in this scope
scripts/kconfig/qconf.cc:690: error: 'Key_Y' was not declared in this scope

scripts/kconfig/qconf.cc: In constructor 'ConfigMainWindow::ConfigMainWindow()':
scripts/kconfig/qconf.cc:1329: error: 'CTRL' was not declared in this scope
scripts/kconfig/qconf.cc:1329: error: 'Key_Q' was not declared in this scope
scripts/kconfig/qconf.cc:1331: error: 'Key_L' was not declared in this scope
scripts/kconfig/qconf.cc:1333: error: 'Key_S' was not declared in this scope
scripts/kconfig/qconf.cc:1340: error: 'Key_F' was not declared in this scope

Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-06-09 22:37:50 +02:00
Markus Heidelberg
7298b93601 kconfig qconf: fix namespace for Horizontal and Vertical enum values
They were used as QSplitter::Horizontal resp. QSplitter::Vertical, but
are defined in the 'Qt' namespace.

Fixes the following compiler errors after a quick conversion with 'qt3to4',
which occured with g++ 3.4.6 and 4.1.2, but not anymore with 4.3.2.

scripts/kconfig/qconf.cc: In constructor 'ConfigSearchWindow::ConfigSearchWindow(ConfigMainWindow*, const char*)':
scripts/kconfig/qconf.cc:1213: error: 'Vertical' is not a member of 'QSplitter'

scripts/kconfig/qconf.cc: In constructor 'ConfigMainWindow::ConfigMainWindow()':
scripts/kconfig/qconf.cc:1304: error: 'Horizontal' is not a member of 'QSplitter'
scripts/kconfig/qconf.cc:1311: error: 'Vertical' is not a member of 'QSplitter'

Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-06-09 22:37:49 +02:00
Markus Heidelberg
98403a9138 kconfig qconf: fix -Wall compiler warnings
These compiler warnings occure when adding -Wall to HOSTCXXFLAGS in
/Makefile

scripts/kconfig/qconf.h: In constructor ‘ConfigInfoView::ConfigInfoView(QWidget*, const char*)’:
scripts/kconfig/qconf.h:274: warning: ‘ConfigInfoView::menu’ will be initialized after
scripts/kconfig/qconf.h:273: warning:   ‘symbol* ConfigInfoView::sym’
scripts/kconfig/qconf.cc:922: warning:   when initialized here

scripts/kconfig/qconf.cc: In member function ‘void ConfigMainWindow::setMenuLink(menu*)’:
scripts/kconfig/qconf.cc:1498: warning: enumeration value ‘menuMode’ not handled in switch
scripts/kconfig/qconf.cc:1498: warning: enumeration value ‘listMode’ not handled in switch

scripts/kconfig/qconf.cc: In member function ‘void ConfigMainWindow::saveSettings()’:
scripts/kconfig/qconf.cc:1664: warning: enumeration value ‘menuMode’ not handled in switch
scripts/kconfig/qconf.cc:1664: warning: enumeration value ‘listMode’ not handled in switch

Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-06-09 22:37:48 +02:00
Markus Heidelberg
c26dd719a5 gitignore: ignore Kconfig i18n files
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-06-09 22:37:47 +02:00
Markus Heidelberg
590a585729 kconfig: add a note about the deps to the 'silentoldconfig' help
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-06-09 22:37:46 +02:00
Markus Heidelberg
6f26e5e412 kconfig: fix typo "mconfig" to "menuconfig" in a comment
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-06-09 22:37:46 +02:00
Peter Korsgaard
af6c159885 kconfig: handle comment entries within choice/endchoice
Implement support for comment entries within choice groups. Comment entries
are displayed visually distinct from normal configs, and selecting them is
a no-op.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-06-09 22:37:34 +02:00
Sam Ravnborg
612c280ef2 kconfig: fix update-po-config to accect backslash in input
Massimo Maiurana reported (slightly edited):

=====
In latest 2.6.29 "make update-po-config" fails at msguniq invocation
with an "invalid control sequence" error.
The offending string is the following, and it's located in
drivers/staging/panel/Kconfig:72:

    "'\e[L' which are specific to the LCD, and a few ANSI codes. The"

looks to me like gettext expects strings in printf format, so in
this case it thinks "\e" is a control sequence but doesn't recognise
it as a valid one.

A valid solution would be to tell kxgettext to automatically
escape this kind of strings in the */config.pot he produces, so that
msguniq would not complain.
=====

This patch implements the suggested escaping.

Reported-by: Massimo Maiurana <maiurana@gmail.com>
Tested-by: Massimo Maiurana <maiurana@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-04-11 08:18:07 +02:00
Ingo Molnar
b0fe551000 kconfig: improve seed in randconfig
'make randconfig' uses glibc's rand function, and the seed of
that PRNG is set via:

			srand(time(NULL));

But 'time()' only increases once every second - freezing the
randconfig result within a single second.

My Nehalem testbox does randconfig much faster than 1 second
 and i have a few scripts that do 'randconfig until condition X'
loops.

Those scripts currently waste a lot of CPU time due to randconfig
changing its seed only once per second currently.

Change the seed to be micrseconds based. (I checked the statistical
spread of the seed - the now.tv_sec*now.tv_usec multiplication
there further improves it.)

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Roman Zippel <zippel@linux-m68k.org>
[sam: fix for systems where usec is zero - noticed by Geert Uytterhoeven]
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-03-15 23:02:07 +01:00
Sam Ravnborg
184832c981 kconfig: fix randconfig for choice blocks
Ingo Molnar reported that 'make randconfig' was not covering
choice blocks properly, resulting in certain config options
being left out of randconfig testing altogether.

With the following patch we:
- properly randomize choice value for normal choice blocks
- properly randomize for multi choice blocks
- added several comments to explain what is going on

The root cause of the bug was that SYMBOL_VALID was set on the
symbol representing the choice block so clearing this did
the trick initially.
But testign revealed a few more issues that is now fixed.

Reported-by: Ingo Molnar <mingo@elte.hu>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-03-15 22:54:57 +01:00
Sam Ravnborg
7826005e5a kconfig: improve error messages for bad source statements
We now say where we detect the second source of a file,
and where we detect a recursively source of the same file.
This makes it easier to fix such errors.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
2009-01-02 20:43:22 +01:00
Sam Ravnborg
cf82607a90 kconfig: struct property commented
No functional changes

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-01-02 20:43:21 +01:00