The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230403154014.2564054-5-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the gpiod interface instead of the deprecated old non-descriptor
interface while continuing to ignore gpio flags from device tree in
functions "deassert_reset()" and "assert_reset()" for now.
Reviewed-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix "alignment should match open parenthesis" checkpatch.pl error.
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now that the SPDX tag is in all greybus files, that identifies the
license in a specific and legally-defined manner. So the extra GPL text
wording can be removed as it is no longer needed at all.
This is done on a quest to remove the 700+ different ways that files in
the kernel describe the GPL license text. And there's unneeded stuff
like the address (sometimes incorrect) for the FSF which is never
needed.
No copyright headers or other non-license-description text was removed.
Cc: Vaibhav Hiremath <hvaibhav.linux@gmail.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Acked-by: Vaibhav Agarwal <vaibhav.sr@gmail.com>
Acked-by: David Lin <dtwlin@gmail.com>
Acked-by: Johan Hovold <johan@kernel.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Mark Greer <mgreer@animalcreek.com>
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Acked-by: "Bryan O'Donoghue" <pure.logic@nexus-software.ie>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It's good to have SPDX identifiers in all files to make it easier to
audit the kernel tree for correct licenses.
Update the drivers/staging/greybus files files with the correct SPDX
license identifier based on the license text in the file itself. The
SPDX identifier is a legally binding shorthand, which can be used
instead of the full boiler plate text.
This work is based on a script and data from Thomas Gleixner, Philippe
Ombredanne, and Kate Stewart.
Cc: Vaibhav Hiremath <hvaibhav.linux@gmail.com>
Cc: "Bryan O'Donoghue" <pure.logic@nexus-software.ie>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Acked-by: Vaibhav Agarwal <vaibhav.sr@gmail.com>
Acked-by: David Lin <dtwlin@gmail.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Acked-by: Johan Hovold <johan@kernel.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Mark Greer <mgreer@animalcreek.com>
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the remaining timesync bits that were left in the arche platform
driver and which prevented the driver from being compiled.
Fixes: bdfb95c4ba ("staging: greybus: remove timesync protocol support")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes only obvious lines.
There are still more issues.
Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When CONFIG_PM_SLEEP is disabled, SIMPLE_DEV_PM_OPS does not use
arche_apb_ctrl_resume and arche_apb_ctrl_suspend functions:
drivers/staging/greybus/arche-apb-ctrl.c:478:12: warning:
‘arche_apb_ctrl_resume’ defined but not used [-Wunused-function]
static int arche_apb_ctrl_resume(struct device *dev)
^~~~~~~~~~~~~~~~~~~~~
drivers/staging/greybus/arche-apb-ctrl.c:464:12: warning:
‘arche_apb_ctrl_suspend’ defined but not used [-Wunused-function]
static int arche_apb_ctrl_suspend(struct device *dev)
^~~~~~~~~~~~~~~~~~~~~~
Adding __maybe_unused to the declaration of these functions removes the
warnings.
Signed-off-by: Jérémy Lefaure <jeremy.lefaure@lse.epita.fr>
Acked-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fix the coding style problem of block comment detected by the
checkpatch.pl.
WARNING: Block comments use a trailing */ on a separate line
Signed-off-by: Hisao Tanabe <xtanabe@gmail.com>
Acked-by: Johan Hovold <johan@kernel.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Declare the 'arche_apb_ctrl_of_match' array as const. This array is only stored
in the .of_match_table field of a device_driver structure, which is declared as
const. This addresses the checkpatch warning:
WARNING: struct of_device_id should be normally const
Signed-off-by: Eva Rachel Retuya <eraretuya@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In case of Mihi, SPI bus is shared between APB1 and APB2
SPI ROMs, so their FW flashing must be sequential and
arche-platform driver should make sure that they are mutual
exclusive in nature.
So this patch adds certain restrictions to the user of the
arche-platform driver,
- User can no longer flash APB1 and APB2 SPI ROM in parallel
- SPI bus becomes an resource, so user must claim it by moving
respective APB device into FW_FLASHING mode and release it
by exiting FW_FLASHING mode. User can exit FW_FLASHING mode by
switching to any other modes (ACTIVE, OFF, STANDBY).
- If APB1 is in FW_FLASHING mode, APB2 can no longer enter into
FW_FLASHING mode. User will get -EBUSY.
Having said that, while APB1 is into FW_FLASHING mode,
APB2 can independently boot from its own SPI ROM.
Testing Done: Tested by simulating usecase on EVT2.
- Made sure that APB1 and APB2 FW_FLASHING mode is mutual exclusive
in nature. Confirmed that an attempt on second device return -EBUSY.
- Added simulating code, where printed state of dummy gpio for
spi-en and verified that it shows right pin status for both APBs
Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Implement platform driver shutdown callback to perform proper greybus
shutdown so that the userspace unipro_shutdown service that shuts down
the APB/SVC abruptly can be removed. The shutdown callback in
arche-platform will first remove SVC so that all the Interface can be
Deactivated in a sequence according to the spec before powering off the
APB:
Before:
-> Arche/APB power off
-> SoC power off
After this patch:
-> HD shutdown
-> SVC shutdown
-> Module shutdown
-> Interface shutdown
-> Bundle shutdown
-> Arche/APB power off
-> SoC power off
Testing Done:
- Observe all Interfaces are deactivated in the log during shutdown
- Measure power off current and make sure no regression
Signed-off-by: David Lin <dtwlin@google.com>
Reviewed-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
This patch adds the core timesync functionality.
0. arche-platform.c/arche-apb-ctrl.c
Modifies the platform layer to hook the incoming TIME_SYNC signal up to
the timesync strobe IRQ handler. If the arche-platform driver can't
satisfy the request for the wake-detect line, it will return -EAGAIN and
the calling work-queue must reschedule the attempt to get exclusive
access to the wake-detect pin logic. A private data field is added to
the arche-platform driver to enable passing of a timesync pointer to the
ISR responsible for synchronizing time.
1. timesync.c
A new file added which contains all of the logic associated with sending
greybus commands to SVC, APBx or Interfaces to enable, disable and
disseminate timing information.
2. timesync_platform.c
Any platform/arch specific code goes into timesync_platform.c.
Originally the idea was to keep the x86 and ARM arch dependencies in a
timesync_platform_arch.c file - however with further refinement that's
currently not necessary however just-in-case it becomes necessary to
resuscitate arch or platform specific methods for accessing timer
resources that access shouldn't be part of the core timesync.c logic and
so for the moment we access these timer resources through a thin access
layer in timesync_platform.c. Expect this to go away long term ideally.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Acked-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
We have chosen the *ugly* way of registering two platform drivers from
the module_init() of only one of them, so that we can avoid having two
separate modules for them.
But we should still be doing this in a sane way. There is no need to
expose internals of arche-ctrl to arche-platform, like PM-ops, probe,
resume, id-table, etc. Just expose an init and a exit callback.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
GPIO number obtained from of_get_named_gpio() should be signed to allow
error handling.
Testing Done:
Built & booted on EVT1.5
Signed-off-by: David Lin <dtwlin@google.com>
Reviewed-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
With synchronization between SVC <=> AP over wake/detect line to
bring APB's out of reset, we do not need any extra delays now.
So remove it.
Testing Done: Tested for DB3.5 and EVT1.2 platform.
Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Reviewed-by: Michael Scott <michael.scott@linaro.org>
Tested-by: Michael Scott <michael.scott@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Have a check inside all individual operational state change functions
to check whether device is in same state, and if yes, then return
immediately.
Testing Done: Tested on DB3.5 platform.
Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Since parent driver (SVC) is controlling APBs directly, we do not
need to bringup APBs in its own probe.
Testing Done: Tested on EVT1.2.
Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Reviewed-by: Michael Scott <michael.scott@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
With addition of operational state in driver, user/developer
can switch to FW flashing state through sysfs. So no need to
export any gpios to userspace now.
Testing Done: Tested on EVT1.2 and DB3.5 platform
Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
In order to use single wake/detect line for both APB's we need to have
access to APB operational functions to parent/SVC driver.
So export coldboot, standby_boot, fw_flashing and poweroff operation
functions from the driver.
Testing Done: Tested on EVT1.2 and DB3.5 platform
Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
This is preparation for enabling export set of operational fns
to parent driver.
So it is important to differentiate internal ops function against
externally accessed (from parent).
Testing Done: Tested on EVT1.2 and DB3.5 platform.
Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
New DT property "ara,init-disable" will allow user to disable
APB1 or APB2 during boot and enable it only when needed through
command prompt via sysfs interface.
- To disable APB2 during boot, specify "ara,init-disable" property in
respective APB node.
- How to check the state
# cat /sys/devices/arche_platform.*/apb*/state
It should be 'off', if 'ara,init-disable' enabled in DT.
- During runtime if user/developer desired to enable APB2 (strictly and
only for development purpose) then respective APB can be enabled
through,
# echo active > /sys/devices/arche_platform.*/apb*/state
Note:
- If APB device is in 'off,disabled' state, then no state transitions
are permitted.
- User/developer must first activate APB device
# echo active > /sys/devices/arche_platform.*/apb*/state
This will clear the 'init-disable' flag and allow state transition
from here onwards.
Note that, 'off,disabled' is only indicative state and is only
applicable during init/boot.
Testing Done: Tested on EVT1.2 and DB3.5 platform
Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
This patch introduces sysfs interface for the user space to enable
state change of the driver. Driver supports below operational
states,
- off
- active
- standby
- fw_flashing
To see the current state
i # cat /sys/devices/arche_platform.*/apb*/state
And to change the state
# echo [off/active/standby/fw_flashing] > /sys/devices/arche_platform.*/apb*/state
Testing Done: Tested on EVT1.2 and DB3.5 platform
Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Pass only pointer to platform_device to _seq fns and fetch handle to
arche_apb_ctrl_drvdata from platform_device.
This is preparation for support for dynamic switching between operational
states for the device, where these functions will be called from parent
driver.
Testing Done: Tested on EVT1.2 and DB3.5 platform.
Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Explicitly set default apb->state value to ARCHE_PLATFORM_STATE_OFF
in probe() fn.
Testing Done: Tested on EVT1.2 and DB3.5 platform
Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
apb_ctrl_coldboot_seq() and apb_ctrl_poweroff_seq()
is appropriate name as per spec and implementation, so rename it.
Also move apb_ctrl_poweroff_seq() fn above, to group it with
other _seq functions.
Testing Done: Tested on EVT1.2 and DB3.5 platform.
Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
In order to allow APB2 disable by default on boot/init, and also
provide interface to user to enable it later on, re-arrange the init_seq
fn.
The idea here is, the apb_ctrl_init_seq() fn will be renamed to
apb_ctrl_coldboot_seq(), and should not try to claim any resources.
All the resource claim should happen in apb_ctrl_get_devtree_data() fn.
And also uses devm_gpio_request_one() fn wherever possible.
Testing Done: Tested on EVT1.2 and DB3.5 platform.
Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Make 'enum apb_state' common to both platform drivers, so that
both drivers can make use of same state and user will have
unified control configuration across devices (SVC, APB1 and APB2)
Testing Done: Tested on EVT1.2 and DB3.5 platform.
Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
We are seeing failures on DB3.1 board, and Axel root-caused it to this
commit, so revert it as of now.
This reverts commit 942627227684c187b727ba5fb581bc2d886b6708.
Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
With synchronization between SVC <=> AP over wake/detect line to
bring APB's out of reset, we do not need any extra delays now.
So remove it.
Testing Done: Tested for 10 iterations on EVT1
Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Reviewed-by: Michael Scott <michael.scott@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
As part of driver remove (cleanup) function, disable the clock for both
SVC, APB1 & APB2.
Testing Done:
Tested on EVT1 platform with Connect=>disconnect=>connect
iteration, almost close to 100 iterations have passed (demo branch).
And also tested with kernel-only build.
Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
It makes more sense to enable the clock after power is enabled
to the device, so move clock enable code after regulator_enable
and setting up BOOT_RET pin.
Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Tested-by: Michael Scott <michael.scott@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@linaro.org>
Tested-by: Laurent Pinchart <laurent.pinchart@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Now the complete handshaking between AP<=>SVC would be
offloaded to parent driver (arche-platform) who is
responsible for SVC control, so the apb-ctrl driver can
just simply bring APB's out of reset during probe itself.
Along with deasserting reset, this patch renames the local fn
to exclusively use it for reset purpose.
Note that, driver is exporting reset gpio to
user, so user can still flash FW from prompt.
Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Tested-by: Michael Scott <michael.scott@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
With TIME_SYNC functionality, assignment of wake/detect pin
will change,
WD_8A => to bring APB's out of reset
WD_8B => TIME_SYNC operation
So in order to support this, we can no longer keep wake_detect
gpio in apb-ctrl driver. So remove it.
In the subsequent patches, wake_detect support will be added
to parent SVC driver (arche-platform) who is responsible for SVC control.
Note that, this patch also removes ISR related code.
The APB state still is maintained, for future use.
Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Tested-by: Michael Scott <michael.scott@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
This removes few unwanted headers related to irq, interrupt, regulator,
spinlock, etc.
Also arrange the rest in alphabetical order to make it more readable.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
wake_detect_gpio and resetn_gpio are guaranteed to be valid in
apb_ctrl_cleanup() and irq-handler, no need to check for their validity.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Relying on apb_ctrl_cleanup() to do the cleanup for errors that occurred
within apb_ctrl_init_seq() isn't a very clean idea. Handle that
separately within apb_ctrl_init_seq().
This will clean apb_ctrl_cleanup() in later patches.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
If devm_gpio_request() returns an error, we shouldn't try to set the
direction of the same gpio.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Use dev_err for errors after which we need to abort the currently
running routine and dev_warn for resource allocation failure, with which
we can continue to work.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Since NULL could in theory be a valid regulator we ought to check for
IS_ERR() rather than for NULL. In practice this is unlikely to be an
issue but it's better for neatness.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
And so we don't need to check for it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
There can be no invalid values in the DTS. The actual pin numbers are
assigned by gpiolib when the gpio controller is registered.
And so a simple 'gpio < 0' is enough instead of gpio_is_valid() which
also checks for 'gpio < ARCH_NR_GPIOS'.
This will make the usage of of_get_named_gpio() similar with how it is
done in arche-platform driver.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Platform data 'apb' is guaranteed to be valid in arche_apb_ctrl_remove()
and so no need to check it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
- s/premits/permits
- Remove blank lines at the end of the file
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
With addition of handshaking between AP <=> SVC, driver
brings out APB out of reset only on reception of WAKE_MOD
signal from SVC. So remove the deassertion from probe.
Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
This patch enables handshaking of AP and SVC using wake_detect
gpio (WD_8A and WD_8B).
Note that WAKE_DETECT polarity is active-high, so in order to
enable handshaking between AP <=> SVC, we need to set wake_detect
gpio to low initially, so that driver can send WAKE_DET signal
(active-high) to SVC and then SVC can send back WAKE_MOD signal
(active-low).
And on reception of WAKE_MOD signal, driver would bring respective
APB out of reset.
WD_8A => APB1
WD_8B => APB2
Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>