Instead, depend on the size of the destination buffer for easier
refactoring.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20210221154258.119503-1-memxor@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
strlcpy is marked as deprecated in Documentation/process/deprecated.rst,
and there is no functional difference when the caller expects truncation
(when not checking the return value). strscpy is relatively better as it
also avoids scanning the whole source string.
This silences the related checkpatch warnings from:
5dbdb2d87c ("checkpatch: prefer strscpy to strlcpy")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20210131172838.146706-3-memxor@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the following:
- Made sure alignment matched open parenthesis.
Signed-off-by: Tabot Kevin <tabot.kevin@gmail.com>
Link: https://lore.kernel.org/r/20201112223331.GA1681@tabot
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fix the following warnings from sparse,
$ make C=2 drivers/staging/greybus/
drivers/staging/greybus/audio_module.c:222:25: warning: incorrect type in assignment (different base types)
drivers/staging/greybus/audio_module.c:222:25: expected restricted __le16 [usertype] data_cport
drivers/staging/greybus/audio_module.c:222:25: got unsigned short [usertype] intf_cport_id
drivers/staging/greybus/audio_topology.c:460:40: warning: restricted __le32 degrades to integer
drivers/staging/greybus/audio_topology.c:691:41: warning: incorrect type in assignment (different base types)
drivers/staging/greybus/audio_topology.c:691:41: expected unsigned int access
drivers/staging/greybus/audio_topology.c:691:41: got restricted __le32 [usertype] access
drivers/staging/greybus/audio_topology.c:746:44: warning: incorrect type in assignment (different base types)
drivers/staging/greybus/audio_topology.c:746:44: expected unsigned int
drivers/staging/greybus/audio_topology.c:746:44: got restricted __le32
drivers/staging/greybus/audio_topology.c:748:52: warning: incorrect type in assignment (different base types)
drivers/staging/greybus/audio_topology.c:748:52: expected unsigned int
drivers/staging/greybus/audio_topology.c:748:52: got restricted __le32
drivers/staging/greybus/audio_topology.c:802:42: warning: restricted __le32 degrades to integer
drivers/staging/greybus/audio_topology.c:805:50: warning: incorrect type in assignment (different base types)
drivers/staging/greybus/audio_topology.c:805:50: expected restricted __le32
drivers/staging/greybus/audio_topology.c:805:50: got unsigned int
drivers/staging/greybus/audio_topology.c:814:50: warning: restricted __le32 degrades to integer
drivers/staging/greybus/audio_topology.c:817:58: warning: incorrect type in assignment (different base types)
drivers/staging/greybus/audio_topology.c:817:58: expected restricted __le32
drivers/staging/greybus/audio_topology.c:817:58: got unsigned int
drivers/staging/greybus/audio_topology.c:889:25: warning: incorrect type in assignment (different base types)
drivers/staging/greybus/audio_topology.c:889:25: expected unsigned int access
drivers/staging/greybus/audio_topology.c:889:25: got restricted __le32 [usertype] access
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Coiby Xu <coiby.xu@gmail.com>
Link: https://lore.kernel.org/r/20201002233057.74462-1-coiby.xu@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As per the current implementation for GB codec driver, a jack list is
maintained for each module. And it expects the list to be populated by
the snd_soc_jack structure which would require modifications in
mainstream code.
However, this is not a necessary requirement and the list can be easily
maintained within gbaudio_module_info as well. This patch provides the
relevant changes for the same.
Signed-off-by: Vaibhav Agarwal <vaibhav.sr@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/4ee030af7a8e203f89a6e513313e36f4e2991e5b.1594290158.git.vaibhav.sr@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some parameters are aligned with parentheses.
Some parentheses was opened at end of line.
Signed-off-by: Cristian Sicilia <sicilia.cristian@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now that the SPDX tag is in all greybus files, that identifies the
license in a specific and legally-defined manner. So the extra GPL text
wording can be removed as it is no longer needed at all.
This is done on a quest to remove the 700+ different ways that files in
the kernel describe the GPL license text. And there's unneeded stuff
like the address (sometimes incorrect) for the FSF which is never
needed.
No copyright headers or other non-license-description text was removed.
Cc: Vaibhav Hiremath <hvaibhav.linux@gmail.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Acked-by: Vaibhav Agarwal <vaibhav.sr@gmail.com>
Acked-by: David Lin <dtwlin@gmail.com>
Acked-by: Johan Hovold <johan@kernel.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Mark Greer <mgreer@animalcreek.com>
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Acked-by: "Bryan O'Donoghue" <pure.logic@nexus-software.ie>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It's good to have SPDX identifiers in all files to make it easier to
audit the kernel tree for correct licenses.
Update the drivers/staging/greybus files files with the correct SPDX
license identifier based on the license text in the file itself. The
SPDX identifier is a legally binding shorthand, which can be used
instead of the full boiler plate text.
This work is based on a script and data from Thomas Gleixner, Philippe
Ombredanne, and Kate Stewart.
Cc: Vaibhav Hiremath <hvaibhav.linux@gmail.com>
Cc: "Bryan O'Donoghue" <pure.logic@nexus-software.ie>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Acked-by: Vaibhav Agarwal <vaibhav.sr@gmail.com>
Acked-by: David Lin <dtwlin@gmail.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Acked-by: Johan Hovold <johan@kernel.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Mark Greer <mgreer@animalcreek.com>
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Proper byte order was completely disregarded for multi byte data shared
between AP and module (and APB1). Fix this.
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Signed-off-by: Vaibhav Agarwal <vaibhav.sr@gmail.com>
Acked-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
gb_audio_manager_module_descriptor's intf_id field maintains the
information about the interface on which module is connected hence
having an extra slot field is redundant.
Thus remove the slot field and its associated code.
Signed-off-by: Pankaj Bharadiya <pankaj.bharadiya@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Vaibhav Agarwal <vaibhav.sr@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
gb_audio_manager_module_descriptor's cport field is actually used to
manage and pass interface id to user space.
Thus rename gb_audio_manager_module_descriptor's 'cport' field and
few other things to avoid confusion.
Signed-off-by: Pankaj Bharadiya <pankaj.bharadiya@gmail.com>
Reviewed-by: Vaibhav Agarwal <vaibhav.sr@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The last thing remaining in kernel_ver.h was the setting of
CONFIG_PM_RUNTIME, which isn't needed in a in-tree implementation. So
remove the setting of this value, and the .h file entirely as that was
the last thing left in it.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Now jack-button are registered to snd framework based on capabilities
populated by codec module's topology data. Thus, valid ids for button
events can also vary for different modules. This patch modifies existing
button reporting mechanism to avoid reporting spurious button events for
invalid button ids.
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Reviewed-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Now jack & jack-buttons are registered to snd_jack framework based on
the capability shared by module's topology data. Thus, jack events
should be reported to above snd framework only in case corresponding
jack type is registered. This patch adds additional checks to avoid
reporting fake jack events.
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Reviewed-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Added extra fields namely jack_mask & button_mask for each module_info.
These fields are required while registering jack & reporting jack
events.
Earlier, these were hard coded values assuming fixed capabilities say
HEADSET, LINEOUT, etc. supported by GB-codec driver. Now these are
computed dynamically based on module's jack capability shared via
topology data.
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Reviewed-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Audio codec driver internally maintains a struct containing info about
module's data connection. Remove unused field from this struct.
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Reviewed-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Added id field to data connection struct. This is used to identify which
data connection to use while enabling interface between module & APB.
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Reviewed-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Add runtime pm support to audio protocol device class driver.
Testing Done:
- Use white speaker module and check the interface is autosuspended when
it's idle and resumed when playback audio
Signed-off-by: David Lin <dtwlin@google.com>
Signed-off-by: Axel Haslam <ahaslam@baylibre.com>
Reviewed-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Signed-off-by: Alex Elder <elder@linaro.org>
This patch removes few blank lines across the repository at places where
two blank lines were present together or when a blank line is present at
the start or end of a routine.
Note that this doesn't remove most of them from greybus_protocols.h as
they were added on purpose.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Earlier I have shared a patch to rate limit err messages in audio_codec
driver. However, missed to include suggestion from Mark to do similar
changes in audio bundle & topology parser as well. Doing it now.
Testing Done: Compile tested
Fixes: 4cb3d109e5fc ("audio: Ratelimit err messages")
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Reviewed-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Reporting DISCONNECT event immediately on module removal causes
race condition while re-populating mixer controls by above HAL. The
original intent was to avoid any (invalid) mixer control modification
request from above layer.
Ideally, it should report 'MODULE_NOT_READY' on module plug-out and
DISCONNECT after resource cleanup. This would involve changes in GB
Audio manager and HAL layer.
Since we already have a plan to remove GB Audio manager, I'm making this
change in GB codec driver to avoid any race condition. Also, codec
driver already ensures mixer control modifcations for disconnected
modules are not triggered to AP Bridge audio FW & reported invalid.
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Reviewed-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Topology data pointer was mistakenly set to NULL before freeing it. Fix
this.
Fixes: 64a86d9ba850 ("audio: Add module specific driver")
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Mark the data-connection as offloaded, that is, under control of the
host device (AP-bridge).
This prevents messages from being sent from or forwarded to the AP.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Use standard API greybus_set_drvdata() while setting private
data pointers for mgmt & data connection.
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Modify sequence of register_module & unregister_module in bundle
driver. This would affect the uevent generated for above user
space. Accordingly, we need to modify snd_soc_xxx sequence in
register_module() in codec driver.
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Each module maintains connected status & a lock to protect it.
Using codec->lock we can safely serialize ASoC specific callbacks
(in response to mixer_ctl update or dai_ops) and gb module
disconnect. Thus is_connected field can be removed.
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Originally, idea was to use widget_type to identify jack_type.
However, suggestive way is to identify jack based on jack
attributes.
Changes already exists in codec FW to report jack attributes.
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Reviewed-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Update Makefile in response to SND_SOC_DYNAMIC_DAILINK cflag
removal.
Update files for msm-dynamic-dailink.h header file removal.
Update in response to API name changes. Also, acquire sound card
controls_rwsem before adding kcontrols to avoid deadlock.
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Reviewed-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Device type info shared to above HAL is currently hard coded
to SPK only. Actual device type is identifed while parsing
widget types from topology FW shared by codec module.
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Reviewed-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Currently, single field is used to report device type say SPK,
MIC, HS, HP, etc. However above HAL expects separate fields for
input & ouput device types.
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Reviewed-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Register jack with ASoC sound card in case audio module
populates it via codec FW. Currently, only a single jack
with 4 buttons can be registered for each module.
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Reviewed-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Use seperate driver to process GB Audio modules plugged-in.
It'll use helper function register_module to attach itself
to gbaudio-codec driver.
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Reviewed-by: Mark Greer <mark.greer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
