mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-23 09:19:51 +00:00
73099 commits
Author | SHA1 | Message | Date | |
---|---|---|---|---|
![]() |
ed23734c23 |
Including fixes from netfilter.
Current release - regressions: - sched: act_pedit: free pedit keys on bail from offset check Current release - new code bugs: - pds_core: - Kconfig fixes (DEBUGFS and AUXILIARY_BUS) - fix mutex double unlock in error path Previous releases - regressions: - sched: cls_api: remove block_cb from driver_list before freeing - nf_tables: fix ct untracked match breakage - eth: mtk_eth_soc: drop generic vlan rx offload - sched: flower: fix error handler on replace Previous releases - always broken: - tcp: fix skb_copy_ubufs() vs BIG TCP - ipv6: fix skb hash for some RST packets - af_packet: don't send zero-byte data in packet_sendmsg_spkt() - rxrpc: timeout handling fixes after moving client call connection to the I/O thread - ixgbe: fix panic during XDP_TX with > 64 CPUs - igc: RMW the SRRCTL register to prevent losing timestamp config - dsa: mt7530: fix corrupt frames using TRGMII on 40 MHz XTAL MT7621 - r8152: - fix flow control issue of RTL8156A - fix the poor throughput for 2.5G devices - move setting r8153b_rx_agg_chg_indicate() to fix coalescing - enable autosuspend - ncsi: clear Tx enable mode when handling a Config required AEN - octeontx2-pf: macsec: fixes for CN10KB ASIC rev Misc: - 9p: remove INET dependency Signed-off-by: Jakub Kicinski <kuba@kernel.org> -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmRVeUIACgkQMUZtbf5S IrtTug/9Hhg/L0PTSwrfuGh4W1/cjheMWppNLkwyWQUiKG7FcZQ9vu9PxceE3VRu 2fTqHyvgDMZ8jACovXObeda8z1+g3s/tIPaXELephBIjVlF/h3kG2OaIzlU4jDb4 A4vklwf8eLbfyVBG22QgKl/I70zVMtnmnOo6c6CPuIOTcMPzslndFO9tB0nCg99F DCgCM1BBP1tz+OUch2rLnSzYcqkWqS49BhRk6dhYSliawUFU/5+1tDGDjwWolkfm 0jqP9DjBOSpZKO8m7SpsUNz7NFRIfYErWZ+YebWbggNxj/6TRJTP83MM0tGoK1rE /mz2xpuOki59frlwVOAD6gb/qefjHUp21P4NA7bnhizxFlQL5MHpCeGQ9yLHBSmY 9Q4ArJkM4jXQ0oDA2nII/pz+cDZGEWFGQ14WW3kYUb7WFmISH4I9OiA9i0TBW6OL r1Y/rqzkUvtKWzh9RpiAF9lsdHAm3SX9ES5RfMxzv0x886VOZR4jaMmokRDdPRzq 0r2Oyj75b62+X0r44Fe22Pl/kPS/uh3642xo9h85aAv/EvhT9JNzMvomJm9d6tkb 966I085AVbwxPAy+rl5SWyAq60EWDExNTjZvPv0mSMlmSsQ9iK5//xOF2Saw2zai /44zQ27tVGkCC44Ou5KmfJN3u4OrKkhcuyxtcDr9QeoOdKZRkMg= =9xND -----END PGP SIGNATURE----- Merge tag 'net-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from netfilter. Current release - regressions: - sched: act_pedit: free pedit keys on bail from offset check Current release - new code bugs: - pds_core: - Kconfig fixes (DEBUGFS and AUXILIARY_BUS) - fix mutex double unlock in error path Previous releases - regressions: - sched: cls_api: remove block_cb from driver_list before freeing - nf_tables: fix ct untracked match breakage - eth: mtk_eth_soc: drop generic vlan rx offload - sched: flower: fix error handler on replace Previous releases - always broken: - tcp: fix skb_copy_ubufs() vs BIG TCP - ipv6: fix skb hash for some RST packets - af_packet: don't send zero-byte data in packet_sendmsg_spkt() - rxrpc: timeout handling fixes after moving client call connection to the I/O thread - ixgbe: fix panic during XDP_TX with > 64 CPUs - igc: RMW the SRRCTL register to prevent losing timestamp config - dsa: mt7530: fix corrupt frames using TRGMII on 40 MHz XTAL MT7621 - r8152: - fix flow control issue of RTL8156A - fix the poor throughput for 2.5G devices - move setting r8153b_rx_agg_chg_indicate() to fix coalescing - enable autosuspend - ncsi: clear Tx enable mode when handling a Config required AEN - octeontx2-pf: macsec: fixes for CN10KB ASIC rev Misc: - 9p: remove INET dependency" * tag 'net-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (69 commits) net: bcmgenet: Remove phy_stop() from bcmgenet_netif_stop() pds_core: fix mutex double unlock in error path net/sched: flower: fix error handler on replace Revert "net/sched: flower: Fix wrong handle assignment during filter change" net/sched: flower: fix filter idr initialization net: fec: correct the counting of XDP sent frames bonding: add xdp_features support net: enetc: check the index of the SFI rather than the handle sfc: Add back mailing list virtio_net: suppress cpu stall when free_unused_bufs ice: block LAN in case of VF to VF offload net: dsa: mt7530: fix network connectivity with multiple CPU ports net: dsa: mt7530: fix corrupt frames using trgmii on 40 MHz XTAL MT7621 9p: Remove INET dependency netfilter: nf_tables: fix ct untracked match breakage af_packet: Don't send zero-byte data in packet_sendmsg_spkt(). igc: read before write to SRRCTL register pds_core: add AUXILIARY_BUS and NET_DEVLINK to Kconfig pds_core: remove CONFIG_DEBUG_FS from makefile ionic: catch failure from devlink_alloc ... |
||
![]() |
644bca1d48 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
There's a fix which landed in net-next, pull it in along with the couple of minor cleanups. Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
![]() |
fd741f0d9f |
net/sched: flower: fix error handler on replace
When replacing a filter (i.e. 'fold' pointer is not NULL) the insertion of
new filter to idr is postponed until later in code since handle is already
provided by the user. However, the error handling code in fl_change()
always assumes that the new filter had been inserted into idr. If error
handler is reached when replacing existing filter it may remove it from idr
therefore making it unreachable for delete or dump afterwards. Fix the
issue by verifying that 'fold' argument wasn't provided by caller before
calling idr_remove().
Fixes:
|
||
![]() |
5110f3ff6d |
Revert "net/sched: flower: Fix wrong handle assignment during filter change"
This reverts commit
|
||
![]() |
dd4f6bbfa6 |
net/sched: flower: fix filter idr initialization
The cited commit moved idr initialization too early in fl_change() which
allows concurrent users to access the filter that is still being
initialized and is in inconsistent state, which, in turn, can cause NULL
pointer dereference [0]. Since there is no obvious way to fix the ordering
without reverting the whole cited commit, alternative approach taken to
first insert NULL pointer into idr in order to allocate the handle but
still cause fl_get() to return NULL and prevent concurrent users from
seeing the filter while providing miss-to-action infrastructure with valid
handle id early in fl_change().
[ 152.434728] general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN
[ 152.436163] KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
[ 152.437269] CPU: 4 PID: 3877 Comm: tc Not tainted 6.3.0-rc4+ #5
[ 152.438110] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[ 152.439644] RIP: 0010:fl_dump_key+0x8b/0x1d10 [cls_flower]
[ 152.440461] Code: 01 f2 02 f2 c7 40 08 04 f2 04 f2 c7 40 0c 04 f3 f3 f3 65 48 8b 04 25 28 00 00 00 48 89 84 24 00 01 00 00 48 89 c8 48 c1 e8 03 <0f> b6 04 10 84 c0 74 08 3c 03 0f 8e 98 19 00 00 8b 13 85 d2 74 57
[ 152.442885] RSP: 0018:ffff88817a28f158 EFLAGS: 00010246
[ 152.443851] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
[ 152.444826] RDX: dffffc0000000000 RSI: ffffffff8500ae80 RDI: ffff88810a987900
[ 152.445791] RBP: ffff888179d88240 R08: ffff888179d8845c R09: ffff888179d88240
[ 152.446780] R10: ffffed102f451e48 R11: 00000000fffffff2 R12: ffff88810a987900
[ 152.447741] R13: ffffffff8500ae80 R14: ffff88810a987900 R15: ffff888149b3c738
[ 152.448756] FS: 00007f5eb2a34800(0000) GS:ffff88881ec00000(0000) knlGS:0000000000000000
[ 152.449888] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 152.450685] CR2: 000000000046ad19 CR3: 000000010b0bd006 CR4: 0000000000370ea0
[ 152.451641] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 152.452628] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 152.453588] Call Trace:
[ 152.454032] <TASK>
[ 152.454447] ? netlink_sendmsg+0x7a1/0xcb0
[ 152.455109] ? sock_sendmsg+0xc5/0x190
[ 152.455689] ? ____sys_sendmsg+0x535/0x6b0
[ 152.456320] ? ___sys_sendmsg+0xeb/0x170
[ 152.456916] ? do_syscall_64+0x3d/0x90
[ 152.457529] ? entry_SYSCALL_64_after_hwframe+0x46/0xb0
[ 152.458321] ? ___sys_sendmsg+0xeb/0x170
[ 152.458958] ? __sys_sendmsg+0xb5/0x140
[ 152.459564] ? do_syscall_64+0x3d/0x90
[ 152.460122] ? entry_SYSCALL_64_after_hwframe+0x46/0xb0
[ 152.460852] ? fl_dump_key_options.part.0+0xea0/0xea0 [cls_flower]
[ 152.461710] ? _raw_spin_lock+0x7a/0xd0
[ 152.462299] ? _raw_read_lock_irq+0x30/0x30
[ 152.462924] ? nla_put+0x15e/0x1c0
[ 152.463480] fl_dump+0x228/0x650 [cls_flower]
[ 152.464112] ? fl_tmplt_dump+0x210/0x210 [cls_flower]
[ 152.464854] ? __kmem_cache_alloc_node+0x1a7/0x330
[ 152.465592] ? nla_put+0x15e/0x1c0
[ 152.466160] tcf_fill_node+0x515/0x9a0
[ 152.466766] ? tc_setup_offload_action+0xf0/0xf0
[ 152.467463] ? __alloc_skb+0x13c/0x2a0
[ 152.468067] ? __build_skb_around+0x330/0x330
[ 152.468814] ? fl_get+0x107/0x1a0 [cls_flower]
[ 152.469503] tc_del_tfilter+0x718/0x1330
[ 152.470115] ? is_bpf_text_address+0xa/0x20
[ 152.470765] ? tc_ctl_chain+0xee0/0xee0
[ 152.471335] ? __kernel_text_address+0xe/0x30
[ 152.471948] ? unwind_get_return_address+0x56/0xa0
[ 152.472639] ? __thaw_task+0x150/0x150
[ 152.473218] ? arch_stack_walk+0x98/0xf0
[ 152.473839] ? __stack_depot_save+0x35/0x4c0
[ 152.474501] ? stack_trace_save+0x91/0xc0
[ 152.475119] ? security_capable+0x51/0x90
[ 152.475741] rtnetlink_rcv_msg+0x2c1/0x9d0
[ 152.476387] ? rtnl_calcit.isra.0+0x2b0/0x2b0
[ 152.477042] ? __sys_sendmsg+0xb5/0x140
[ 152.477664] ? do_syscall_64+0x3d/0x90
[ 152.478255] ? entry_SYSCALL_64_after_hwframe+0x46/0xb0
[ 152.479010] ? __stack_depot_save+0x35/0x4c0
[ 152.479679] ? __stack_depot_save+0x35/0x4c0
[ 152.480346] netlink_rcv_skb+0x12c/0x360
[ 152.480929] ? rtnl_calcit.isra.0+0x2b0/0x2b0
[ 152.481517] ? do_syscall_64+0x3d/0x90
[ 152.482061] ? netlink_ack+0x1550/0x1550
[ 152.482612] ? rhashtable_walk_peek+0x170/0x170
[ 152.483262] ? kmem_cache_alloc_node+0x1af/0x390
[ 152.483875] ? _copy_from_iter+0x3d6/0xc70
[ 152.484528] netlink_unicast+0x553/0x790
[ 152.485168] ? netlink_attachskb+0x6a0/0x6a0
[ 152.485848] ? unwind_next_frame+0x11cc/0x1a10
[ 152.486538] ? arch_stack_walk+0x61/0xf0
[ 152.487169] netlink_sendmsg+0x7a1/0xcb0
[ 152.487799] ? netlink_unicast+0x790/0x790
[ 152.488355] ? iovec_from_user.part.0+0x4d/0x220
[ 152.488990] ? _raw_spin_lock+0x7a/0xd0
[ 152.489598] ? netlink_unicast+0x790/0x790
[ 152.490236] sock_sendmsg+0xc5/0x190
[ 152.490796] ____sys_sendmsg+0x535/0x6b0
[ 152.491394] ? import_iovec+0x7/0x10
[ 152.491964] ? kernel_sendmsg+0x30/0x30
[ 152.492561] ? __copy_msghdr+0x3c0/0x3c0
[ 152.493160] ? do_syscall_64+0x3d/0x90
[ 152.493706] ___sys_sendmsg+0xeb/0x170
[ 152.494283] ? may_open_dev+0xd0/0xd0
[ 152.494858] ? copy_msghdr_from_user+0x110/0x110
[ 152.495541] ? __handle_mm_fault+0x2678/0x4ad0
[ 152.496205] ? copy_page_range+0x2360/0x2360
[ 152.496862] ? __fget_light+0x57/0x520
[ 152.497449] ? mas_find+0x1c0/0x1c0
[ 152.498026] ? sockfd_lookup_light+0x1a/0x140
[ 152.498703] __sys_sendmsg+0xb5/0x140
[ 152.499306] ? __sys_sendmsg_sock+0x20/0x20
[ 152.499951] ? do_user_addr_fault+0x369/0xd80
[ 152.500595] do_syscall_64+0x3d/0x90
[ 152.501185] entry_SYSCALL_64_after_hwframe+0x46/0xb0
[ 152.501917] RIP: 0033:0x7f5eb294f887
[ 152.502494] Code: 0a 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b9 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10
[ 152.505008] RSP: 002b:00007ffd2c708f78 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
[ 152.506152] RAX: ffffffffffffffda RBX: 00000000642d9472 RCX: 00007f5eb294f887
[ 152.507134] RDX: 0000000000000000 RSI: 00007ffd2c708fe0 RDI: 0000000000000003
[ 152.508113] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000
[ 152.509119] R10: 00007f5eb2808708 R11: 0000000000000246 R12: 0000000000000001
[ 152.510068] R13: 0000000000000000 R14: 00007ffd2c70d1b8 R15: 0000000000485400
[ 152.511031] </TASK>
[ 152.511444] Modules linked in: cls_flower sch_ingress openvswitch nsh mlx5_vdpa vringh vhost_iotlb vdpa mlx5_ib mlx5_core rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi ib_umad rdma_cm ib_ipoib iw_cm ib_cm ib_uverbs ib_core xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter overlay zram zsmalloc fuse [last unloaded: mlx5_core]
[ 152.515720] ---[ end trace 0000000000000000 ]---
Fixes:
|
||
![]() |
8e15605be8 |
9p patches for 6.4 merge window
This pull request includes a number of patches that didn't quite make the cut last merge window while we addressed some outstanding issues and review comments. It includes some new caching modes for those that only want readahead caches and reworks how we do writeback caching so we are not keeping extra references around which both causes performance problems and uses lots of additional resources on the server. It also includes a new flag to force disabling of xattrs which can also cause major performance issues, particularly if the underlying filesystem on the server doesn't support them. Finally it adds a couple of additional mount options to better support directio and enabling caches when the server doesn't support qid.version. There was one late-breaking bug report that has also been included as its own patch where I forgot to propagate an embarassing bit-logic fix to the various variations of open. Since that was only added to for-next a week ago, if you would like to not include it, I can include it in the first round of fixes for -rc2. Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org> -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEElpbw0ZalkJikytFRiP/V+0pf/5gFAmRS/LEACgkQiP/V+0pf /5i84RAAqFtTYPYxg0VMLvjix0BCCE7CYR+vr7UsoGFeuVRyFsKh7G6fhmRXUhpG 2kf+1CK+xzQd9PEKiQnVmGhib9SCdeWqb9EUpCgLZEmrSci0qUenzjf3Jg5Qgwhx u6xu9tipzHeHMFBD6n0f+j2fZEsDAv5IzgL14F9YfJQueVsL+HUOifLncruWnUEn rJAf7omhE1x+FfWsNaB22AksvYUXtQfoG3MgCPWql/XKlo/6xeW/8/eprutIO06M LUp3ie4RbSRZiE63SfPhxFMJCZ7g+R1JSKe1J8i9bbbwzYsVO8dovwdMCw0tP7ZQ QjVq+Ng4x0Rn5Bmekj18ua7zRsbl96DaoqcnYWKUOHkRVJleTG9t31MeZQaRC+gh F3321XkqDBHMXPVVLVQ1Gb1Pxt8dk9iFwmTMxktTrM4n5Zwv8ldMDKQgOhDIv9WA dDTjZ7mYpk2f9atxA0oys5oebQlT3D0CM/3p6n/PsXXpk30tat99kgcKlpN8SrL+ Fs0UkXTQuu0Vin8zaMarQ2TW2UGQVM8qRD2gTooRnOItdqItx17czaE2ALOdIuVs LCbDxOXNPP/YbzakNUxh5ldI3Z3eahbilVfGa8ILfvprKnH7MaMmSo0rkP4XHj1h JDUiN7JOCOW4dvfaXa4knSIjs62Y9oTS0MWrO9Ajq8bg4ku6U7c= =qXIe -----END PGP SIGNATURE----- Merge tag '9p-6.4-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs Pull 9p updates from Eric Van Hensbergen: "This includes a number of patches that didn't quite make the cut last merge window while we addressed some outstanding issues and review comments. It includes some new caching modes for those that only want readahead caches and reworks how we do writeback caching so we are not keeping extra references around which both causes performance problems and uses lots of additional resources on the server. It also includes a new flag to force disabling of xattrs which can also cause major performance issues, particularly if the underlying filesystem on the server doesn't support them. Finally it adds a couple of additional mount options to better support directio and enabling caches when the server doesn't support qid.version. There was one late-breaking bug report that has also been included as its own patch where I forgot to propagate an embarassing bit-logic fix to the various variations of open" * tag '9p-6.4-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs: fs/9p: Fix bit operation logic error fs/9p: Rework cache modes and add new options to Documentation fs/9p: remove writeback fid and fix per-file modes fs/9p: Add new mount modes 9p: Add additional debug flags and open modes fs/9p: allow disable of xattr support on mount fs/9p: Remove unnecessary superblock flags fs/9p: Consolidate file operations and add readahead and writeback |
||
![]() |
d7385ba137 |
9p: Remove INET dependency
9pfs can run over assorted transports, so it doesn't have an INET dependency. Drop it and remove the includes of linux/inet.h. NET_9P_FD/trans_fd.o builds without INET or UNIX and is usable over plain file descriptors. However, tcp and unix functionality is still built and would generate runtime failures if used. Add imply INET and UNIX to NET_9P_FD, so functionality is enabled by default but can still be explicitly disabled. This allows configuring 9pfs over Xen with INET and UNIX disabled. Signed-off-by: Jason Andryuk <jandryuk@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
![]() |
f057b63bc1 |
netfilter: nf_tables: fix ct untracked match breakage
"ct untracked" no longer works properly due to erroneous NFT_BREAK.
We have to check ctinfo enum first.
Fixes:
|
||
![]() |
6a341729fb |
af_packet: Don't send zero-byte data in packet_sendmsg_spkt().
syzkaller reported a warning below [0]. We can reproduce it by sending 0-byte data from the (AF_PACKET, SOCK_PACKET) socket via some devices whose dev->hard_header_len is 0. struct sockaddr_pkt addr = { .spkt_family = AF_PACKET, .spkt_device = "tun0", }; int fd; fd = socket(AF_PACKET, SOCK_PACKET, 0); sendto(fd, NULL, 0, 0, (struct sockaddr *)&addr, sizeof(addr)); We have a similar fix for the (AF_PACKET, SOCK_RAW) socket as commit |
||
![]() |
9ad685dbfe |
ethtool: Fix uninitialized number of lanes
It is not possible to set the number of lanes when setting link modes
using the legacy IOCTL ethtool interface. Since 'struct
ethtool_link_ksettings' is not initialized in this path, drivers receive
an uninitialized number of lanes in 'struct
ethtool_link_ksettings::lanes'.
When this information is later queried from drivers, it results in the
ethtool code making decisions based on uninitialized memory, leading to
the following KMSAN splat [1]. In practice, this most likely only
happens with the tun driver that simply returns whatever it got in the
set operation.
As far as I can tell, this uninitialized memory is not leaked to user
space thanks to the 'ethtool_ops->cap_link_lanes_supported' check in
linkmodes_prepare_data().
Fix by initializing the structure in the IOCTL path. Did not find any
more call sites that pass an uninitialized structure when calling
'ethtool_ops::set_link_ksettings()'.
[1]
BUG: KMSAN: uninit-value in ethnl_update_linkmodes net/ethtool/linkmodes.c:273 [inline]
BUG: KMSAN: uninit-value in ethnl_set_linkmodes+0x190b/0x19d0 net/ethtool/linkmodes.c:333
ethnl_update_linkmodes net/ethtool/linkmodes.c:273 [inline]
ethnl_set_linkmodes+0x190b/0x19d0 net/ethtool/linkmodes.c:333
ethnl_default_set_doit+0x88d/0xde0 net/ethtool/netlink.c:640
genl_family_rcv_msg_doit net/netlink/genetlink.c:968 [inline]
genl_family_rcv_msg net/netlink/genetlink.c:1048 [inline]
genl_rcv_msg+0x141a/0x14c0 net/netlink/genetlink.c:1065
netlink_rcv_skb+0x3f8/0x750 net/netlink/af_netlink.c:2577
genl_rcv+0x40/0x60 net/netlink/genetlink.c:1076
netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline]
netlink_unicast+0xf41/0x1270 net/netlink/af_netlink.c:1365
netlink_sendmsg+0x127d/0x1430 net/netlink/af_netlink.c:1942
sock_sendmsg_nosec net/socket.c:724 [inline]
sock_sendmsg net/socket.c:747 [inline]
____sys_sendmsg+0xa24/0xe40 net/socket.c:2501
___sys_sendmsg+0x2a1/0x3f0 net/socket.c:2555
__sys_sendmsg net/socket.c:2584 [inline]
__do_sys_sendmsg net/socket.c:2593 [inline]
__se_sys_sendmsg net/socket.c:2591 [inline]
__x64_sys_sendmsg+0x36b/0x540 net/socket.c:2591
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Uninit was stored to memory at:
tun_get_link_ksettings+0x37/0x60 drivers/net/tun.c:3544
__ethtool_get_link_ksettings+0x17b/0x260 net/ethtool/ioctl.c:441
ethnl_set_linkmodes+0xee/0x19d0 net/ethtool/linkmodes.c:327
ethnl_default_set_doit+0x88d/0xde0 net/ethtool/netlink.c:640
genl_family_rcv_msg_doit net/netlink/genetlink.c:968 [inline]
genl_family_rcv_msg net/netlink/genetlink.c:1048 [inline]
genl_rcv_msg+0x141a/0x14c0 net/netlink/genetlink.c:1065
netlink_rcv_skb+0x3f8/0x750 net/netlink/af_netlink.c:2577
genl_rcv+0x40/0x60 net/netlink/genetlink.c:1076
netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline]
netlink_unicast+0xf41/0x1270 net/netlink/af_netlink.c:1365
netlink_sendmsg+0x127d/0x1430 net/netlink/af_netlink.c:1942
sock_sendmsg_nosec net/socket.c:724 [inline]
sock_sendmsg net/socket.c:747 [inline]
____sys_sendmsg+0xa24/0xe40 net/socket.c:2501
___sys_sendmsg+0x2a1/0x3f0 net/socket.c:2555
__sys_sendmsg net/socket.c:2584 [inline]
__do_sys_sendmsg net/socket.c:2593 [inline]
__se_sys_sendmsg net/socket.c:2591 [inline]
__x64_sys_sendmsg+0x36b/0x540 net/socket.c:2591
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Uninit was stored to memory at:
tun_set_link_ksettings+0x37/0x60 drivers/net/tun.c:3553
ethtool_set_link_ksettings+0x600/0x690 net/ethtool/ioctl.c:609
__dev_ethtool net/ethtool/ioctl.c:3024 [inline]
dev_ethtool+0x1db9/0x2a70 net/ethtool/ioctl.c:3078
dev_ioctl+0xb07/0x1270 net/core/dev_ioctl.c:524
sock_do_ioctl+0x295/0x540 net/socket.c:1213
sock_ioctl+0x729/0xd90 net/socket.c:1316
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:870 [inline]
__se_sys_ioctl+0x222/0x400 fs/ioctl.c:856
__x64_sys_ioctl+0x96/0xe0 fs/ioctl.c:856
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Local variable link_ksettings created at:
ethtool_set_link_ksettings+0x54/0x690 net/ethtool/ioctl.c:577
__dev_ethtool net/ethtool/ioctl.c:3024 [inline]
dev_ethtool+0x1db9/0x2a70 net/ethtool/ioctl.c:3078
Fixes:
|
||
![]() |
c1592a8994 |
netfilter: nf_tables: deactivate anonymous set from preparation phase
Toggle deleted anonymous sets as inactive in the next generation, so users cannot perform any update on it. Clear the generation bitmask in case the transaction is aborted. The following KASAN splat shows a set element deletion for a bound anonymous set that has been already removed in the same transaction. [ 64.921510] ================================================================== [ 64.923123] BUG: KASAN: wild-memory-access in nf_tables_commit+0xa24/0x1490 [nf_tables] [ 64.924745] Write of size 8 at addr dead000000000122 by task test/890 [ 64.927903] CPU: 3 PID: 890 Comm: test Not tainted 6.3.0+ #253 [ 64.931120] Call Trace: [ 64.932699] <TASK> [ 64.934292] dump_stack_lvl+0x33/0x50 [ 64.935908] ? nf_tables_commit+0xa24/0x1490 [nf_tables] [ 64.937551] kasan_report+0xda/0x120 [ 64.939186] ? nf_tables_commit+0xa24/0x1490 [nf_tables] [ 64.940814] nf_tables_commit+0xa24/0x1490 [nf_tables] [ 64.942452] ? __kasan_slab_alloc+0x2d/0x60 [ 64.944070] ? nf_tables_setelem_notify+0x190/0x190 [nf_tables] [ 64.945710] ? kasan_set_track+0x21/0x30 [ 64.947323] nfnetlink_rcv_batch+0x709/0xd90 [nfnetlink] [ 64.948898] ? nfnetlink_rcv_msg+0x480/0x480 [nfnetlink] Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> |
||
![]() |
8509f62b0b |
netfilter: nf_tables: hit ENOENT on unexisting chain/flowtable update with missing attributes
If user does not specify hook number and priority, then assume this is
a chain/flowtable update. Therefore, report ENOENT which provides a
better hint than EINVAL. Set on extended netlink error report to refer
to the chain name.
Fixes:
|
||
![]() |
db099c625b |
rxrpc: Fix timeout of a call that hasn't yet been granted a channel
afs_make_call() calls rxrpc_kernel_begin_call() to begin a call (which may
get stalled in the background waiting for a connection to become
available); it then calls rxrpc_kernel_set_max_life() to set the timeouts -
but that starts the call timer so the call timer might then expire before
we get a connection assigned - leading to the following oops if the call
stalled:
BUG: kernel NULL pointer dereference, address: 0000000000000000
...
CPU: 1 PID: 5111 Comm: krxrpcio/0 Not tainted 6.3.0-rc7-build3+ #701
RIP: 0010:rxrpc_alloc_txbuf+0xc0/0x157
...
Call Trace:
<TASK>
rxrpc_send_ACK+0x50/0x13b
rxrpc_input_call_event+0x16a/0x67d
rxrpc_io_thread+0x1b6/0x45f
? _raw_spin_unlock_irqrestore+0x1f/0x35
? rxrpc_input_packet+0x519/0x519
kthread+0xe7/0xef
? kthread_complete_and_exit+0x1b/0x1b
ret_from_fork+0x22/0x30
Fix this by noting the timeouts in struct rxrpc_call when the call is
created. The timer will be started when the first packet is transmitted.
It shouldn't be possible to trigger this directly from userspace through
AF_RXRPC as sendmsg() will return EBUSY if the call is in the
waiting-for-conn state if it dropped out of the wait due to a signal.
Fixes:
|
||
![]() |
0eb362d254 |
rxrpc: Make it so that a waiting process can be aborted
When sendmsg() creates an rxrpc call, it queues it to wait for a connection
and channel to be assigned and then waits before it can start shovelling
data as the encrypted DATA packet content includes a summary of the
connection parameters.
However, sendmsg() may get interrupted before a connection gets assigned
and further sendmsg() calls will fail with EBUSY until an assignment is
made.
Fix this so that the call can at least be aborted without failing on
EBUSY. We have to be careful here as sendmsg() mustn't be allowed to start
the call timer if the call doesn't yet have a connection assigned as an
oops may follow shortly thereafter.
Fixes:
|
||
![]() |
0d098d83c5 |
rxrpc: Fix hard call timeout units
The hard call timeout is specified in the RXRPC_SET_CALL_TIMEOUT cmsg in
seconds, so fix the point at which sendmsg() applies it to the call to
convert to jiffies from seconds, not milliseconds.
Fixes:
|
||
![]() |
526f28bd0f |
net/sched: act_mirred: Add carrier check
There are cases where the device is adminstratively UP, but operationally
down. For example, we have a physical device (Nvidia ConnectX-6 Dx, 25Gbps)
who's cable was pulled out, here is its ip link output:
5: ens2f1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN mode DEFAULT group default qlen 1000
link/ether b8:ce:f6:4b:68:35 brd ff:ff:ff:ff:ff:ff
altname enp179s0f1np1
As you can see, it's administratively UP but operationally down.
In this case, sending a packet to this port caused a nasty kernel hang (so
nasty that we were unable to capture it). Aborting a transmit based on
operational status (in addition to administrative status) fixes the issue.
Fixes:
|
||
![]() |
4e1c80ae5c |
NFSD 6.4 Release Notes
The big ticket item for this release is support for RPC-with-TLS [RFC 9289] has been added to the Linux NFS server. The goal is to provide a simple-to-deploy, low-overhead in-transit confidentiality and peer authentication mechanism. It can supplement NFS Kerberos and it can protect the use of legacy non-cryptographic user authentication flavors such as AUTH_SYS. The TLS Record protocol is handled entirely by kTLS, meaning it can use either software encryption or offload encryption to smart NICs. Work continues on improving NFSD's open file cache. Among the many clean-ups in that area is a patch to convert the rhashtable to use the list-hashing version of that data structure. -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEKLLlsBKG3yQ88j7+M2qzM29mf5cFAmRK/JMACgkQM2qzM29m f5cF5A/+JZFRSPlfSYt0YHzUQQSDdYn5n/IG9TwJQd62xheu083WuKRaCOYYoOhg 06nZd6p7nuF1E0n2ZWOKSE6YkBSE6z4M6KrQlm6lCe/nmxYCR87IYfJCXuL+Yf0e /LdL4OTvDHzY5ec1DreERldPIUJ8GFzwChH8/z4XwbNDR7qJkF/gf8YxpFr+8K+j Cfyl8woZiEze/Nvxy1YtAqa7HMEpitt0aWJN55rHwTh9c3b0nmDzziYFcVqXgybJ /qUHfHBak66ll8RqhcQ3BMuyfszwASERbPsaZ2a5F/RaxLL5ZWfFyhgQwm+PZWT+ J5DdSBwLEQYtKQGD41A1aorP6v/u2QelfWrl4S7/qjRpREp8Ba2IU4fYLjGb1499 Imk68BA7NwFp87tdMi/7en1VVgina4U/S3X71aUYWe+C0g48BfTrVwq4SVbQSAo4 1638vbZnrJbsJMr9OaaysKWfv4KZB020Ji1KVwuqmgy5F8kdfJCCQ2UR/fHuJ3DY R0Zrd1Ryjwr83viP+Xj0ERiW405gPdCT0RJqoA7rznRPCqT5M42tf5z65uO7iZeE C1udgDaoQOtioKlem6FcDXLkryf986slGA7V91lat/Jt8A5jLKQfjVe3Q+kaaqXP ka1DQnYelzMzILQQs39cqW5pShrH8e3tfRZ7JhdBgrpxVXz9ZZM= =lA2+ -----END PGP SIGNATURE----- Merge tag 'nfsd-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux Pull nfsd updates from Chuck Lever: "The big ticket item for this release is that support for RPC-with-TLS [RFC 9289] has been added to the Linux NFS server. The goal is to provide a simple-to-deploy, low-overhead in-transit confidentiality and peer authentication mechanism. It can supplement NFS Kerberos and it can protect the use of legacy non-cryptographic user authentication flavors such as AUTH_SYS. The TLS Record protocol is handled entirely by kTLS, meaning it can use either software encryption or offload encryption to smart NICs. Aside from that, work continues on improving NFSD's open file cache. Among the many clean-ups in that area is a patch to convert the rhashtable to use the list-hashing version of that data structure" * tag 'nfsd-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (31 commits) NFSD: Handle new xprtsec= export option SUNRPC: Support TLS handshake in the server-side TCP socket code NFSD: Clean up xattr memory allocation flags NFSD: Fix problem of COMMIT and NFS4ERR_DELAY in infinite loop SUNRPC: Clear rq_xid when receiving a new RPC Call SUNRPC: Recognize control messages in server-side TCP socket code SUNRPC: Be even lazier about releasing pages SUNRPC: Convert svc_xprt_release() to the release_pages() API SUNRPC: Relocate svc_free_res_pages() nfsd: simplify the delayed disposal list code SUNRPC: Ignore return value of ->xpo_sendto SUNRPC: Ensure server-side sockets have a sock->file NFSD: Watch for rq_pages bounds checking errors in nfsd_splice_actor() sunrpc: simplify two-level sysctl registration for svcrdma_parm_table SUNRPC: return proper error from get_expiry() lockd: add some client-side tracepoints nfs: move nfs_fhandle_hash to common include file lockd: server should unlock lock if client rejects the grant lockd: fix races in client GRANTED_MSG wait logic lockd: move struct nlm_wait to lockd.h ... |
||
![]() |
0127f25b5d |
NFS Client Updates for Linux 6.4
New Features: * Convert the readdir path to use folios * Convert the NFS fscache code to use netfs Bugfixes and Cleanups: * Always send a RECLAIM_COMPLETE after establishing a lease * Simplify sysctl registrations and other cleanups * Handle out-of-order write replies on NFS v3 * Have sunrpc call_bind_status use standard hard/soft task semantics * Other minor cleanups -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEnZ5MQTpR7cLU7KEp18tUv7ClQOsFAmRMI04ACgkQ18tUv7Cl QOuCNQ//SkQm8aOM4DkYFeDIObye6xMzgtWrB25grYNG4a/DcYqb5kNcbmI5l1tE Tus8KMZAWSpwa0m8ALctzp+pZQWQkY/svsqqHrKIGUHBI8F0OinVCqc2MzNN75WX m/1wELW6ek9RBL5BoJtAPt+Qu8/jP6KD64Zot7snBeUrzreaZDcz0HM+EcQhi7X7 qd5XS0/cA2eLEBBQcQdFpRhHvgW12BMYM/zp3/ER5H52L2iAlZunGWw+Nqs8ueOR D7K2+CF1sV1k6hYbLWNoaF2J6PZr5dRpc6gSq4fLP4WUKjqQwmQp8cm9iLpf6jGa a+Y7t8aj7vup8jVCVGWYWZA2G2gi6jWmxxWudkJwfAa1E45t1B4/C0udwlxR20OO XI2Bhe5YwTURgSOvOS9QTZJpQN4qfpEL0NoAmAT5fAHBQ2CXDrMlSIxPS7U6LO9q YqwIHcAHvYVnbD45IUh2Zjbp65mRb1VkU6WzOyK1/sNHEyYpubIWXB/yLaA3oGge V3xUgvlTzLVzzyQfwiRfzAD1P5/USaXE/B36c4itfCr5rJnAfsiBP3gk0o9yq18J 3Yb6olrmc9CzeA7PN88uEus4VZHbaE9OktRFIjJ22jlLQEY4xougdE5asY1XX8F+ OKLLLeeCrsbvrANB9XcLVsLqdMYvsd0VaCX9HtN3UP+7Lod5T10= =gpBC -----END PGP SIGNATURE----- Merge tag 'nfs-for-6.4-1' of git://git.linux-nfs.org/projects/anna/linux-nfs Pull NFS client updates from Anna Schumaker: "New Features: - Convert the readdir path to use folios - Convert the NFS fscache code to use netfs Bugfixes and Cleanups: - Always send a RECLAIM_COMPLETE after establishing a lease - Simplify sysctl registrations and other cleanups - Handle out-of-order write replies on NFS v3 - Have sunrpc call_bind_status use standard hard/soft task semantics - Other minor cleanups" * tag 'nfs-for-6.4-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: NFSv4.2: Rework scratch handling for READ_PLUS NFS: Cleanup unused rpc_clnt variable NFS: set varaiable nfs_netfs_debug_id storage-class-specifier to static SUNRPC: remove the maximum number of retries in call_bind_status NFS: Convert readdir page array functions to use a folio NFS: Convert the readdir array-of-pages into an array-of-folios NFSv3: handle out-of-order write replies. NFS: Remove fscache specific trace points and NFS_INO_FSCACHE bit NFS: Remove all NFSIOS_FSCACHE counters due to conversion to netfs API NFS: Convert buffered read paths to use netfs when fscache is enabled NFS: Configure support for netfs when NFS fscache is configured NFS: Rename readpage_async_filler to nfs_read_add_folio sunrpc: simplify one-level sysctl registration for debug_table sunrpc: move sunrpc_table and proc routines above sunrpc: simplify one-level sysctl registration for xs_tunables_table sunrpc: simplify one-level sysctl registration for xr_tunables_table nfs: simplify two-level sysctl registration for nfs_cb_sysctls nfs: simplify two-level sysctl registration for nfs4_cb_sysctls lockd: simplify two-level sysctl registration for nlm_sysctls NFSv4.1: Always send a RECLAIM_COMPLETE after establishing lease |
||
![]() |
dc6456e938 |
net: ipv6: fix skb hash for some RST packets
The skb hash comes from sk->sk_txhash when using TCP, except for some
IPv6 RST packets. This is because in tcp_v6_send_reset when not in
TIME_WAIT the hash is taken from sk->sk_hash, while it should come from
sk->sk_txhash as those two hashes are not computed the same way.
Packetdrill script to test the above,
0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3
+0 fcntl(3, F_SETFL, O_RDWR|O_NONBLOCK) = 0
+0 connect(3, ..., ...) = -1 EINPROGRESS (Operation now in progress)
+0 > (flowlabel 0x1) S 0:0(0) <...>
// Wrong ack seq, trigger a rst.
+0 < S. 0:0(0) ack 0 win 4000
// Check the flowlabel matches prior one from SYN.
+0 > (flowlabel 0x1) R 0:0(0) <...>
Fixes:
|
||
![]() |
c88f8d5cd9 |
sit: update dev->needed_headroom in ipip6_tunnel_bind_dev()
When a tunnel device is bound with the underlying device, its dev->needed_headroom needs to be updated properly. IPv4 tunnels already do the same in ip_tunnel_bind_dev(). Otherwise we may not have enough header room for skb, especially after commit |
||
![]() |
da94a7781f |
net/sched: cls_api: remove block_cb from driver_list before freeing
Error handler of tcf_block_bind() frees the whole bo->cb_list on error.
However, by that time the flow_block_cb instances are already in the driver
list because driver ndo_setup_tc() callback is called before that up the
call chain in tcf_block_offload_cmd(). This leaves dangling pointers to
freed objects in the list and causes use-after-free[0]. Fix it by also
removing flow_block_cb instances from driver_list before deallocating them.
[0]:
[ 279.868433] ==================================================================
[ 279.869964] BUG: KASAN: slab-use-after-free in flow_block_cb_setup_simple+0x631/0x7c0
[ 279.871527] Read of size 8 at addr ffff888147e2bf20 by task tc/2963
[ 279.873151] CPU: 6 PID: 2963 Comm: tc Not tainted 6.3.0-rc6+ #4
[ 279.874273] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[ 279.876295] Call Trace:
[ 279.876882] <TASK>
[ 279.877413] dump_stack_lvl+0x33/0x50
[ 279.878198] print_report+0xc2/0x610
[ 279.878987] ? flow_block_cb_setup_simple+0x631/0x7c0
[ 279.879994] kasan_report+0xae/0xe0
[ 279.880750] ? flow_block_cb_setup_simple+0x631/0x7c0
[ 279.881744] ? mlx5e_tc_reoffload_flows_work+0x240/0x240 [mlx5_core]
[ 279.883047] flow_block_cb_setup_simple+0x631/0x7c0
[ 279.884027] tcf_block_offload_cmd.isra.0+0x189/0x2d0
[ 279.885037] ? tcf_block_setup+0x6b0/0x6b0
[ 279.885901] ? mutex_lock+0x7d/0xd0
[ 279.886669] ? __mutex_unlock_slowpath.constprop.0+0x2d0/0x2d0
[ 279.887844] ? ingress_init+0x1c0/0x1c0 [sch_ingress]
[ 279.888846] tcf_block_get_ext+0x61c/0x1200
[ 279.889711] ingress_init+0x112/0x1c0 [sch_ingress]
[ 279.890682] ? clsact_init+0x2b0/0x2b0 [sch_ingress]
[ 279.891701] qdisc_create+0x401/0xea0
[ 279.892485] ? qdisc_tree_reduce_backlog+0x470/0x470
[ 279.893473] tc_modify_qdisc+0x6f7/0x16d0
[ 279.894344] ? tc_get_qdisc+0xac0/0xac0
[ 279.895213] ? mutex_lock+0x7d/0xd0
[ 279.896005] ? __mutex_lock_slowpath+0x10/0x10
[ 279.896910] rtnetlink_rcv_msg+0x5fe/0x9d0
[ 279.897770] ? rtnl_calcit.isra.0+0x2b0/0x2b0
[ 279.898672] ? __sys_sendmsg+0xb5/0x140
[ 279.899494] ? do_syscall_64+0x3d/0x90
[ 279.900302] ? entry_SYSCALL_64_after_hwframe+0x46/0xb0
[ 279.901337] ? kasan_save_stack+0x2e/0x40
[ 279.902177] ? kasan_save_stack+0x1e/0x40
[ 279.903058] ? kasan_set_track+0x21/0x30
[ 279.903913] ? kasan_save_free_info+0x2a/0x40
[ 279.904836] ? ____kasan_slab_free+0x11a/0x1b0
[ 279.905741] ? kmem_cache_free+0x179/0x400
[ 279.906599] netlink_rcv_skb+0x12c/0x360
[ 279.907450] ? rtnl_calcit.isra.0+0x2b0/0x2b0
[ 279.908360] ? netlink_ack+0x1550/0x1550
[ 279.909192] ? rhashtable_walk_peek+0x170/0x170
[ 279.910135] ? kmem_cache_alloc_node+0x1af/0x390
[ 279.911086] ? _copy_from_iter+0x3d6/0xc70
[ 279.912031] netlink_unicast+0x553/0x790
[ 279.912864] ? netlink_attachskb+0x6a0/0x6a0
[ 279.913763] ? netlink_recvmsg+0x416/0xb50
[ 279.914627] netlink_sendmsg+0x7a1/0xcb0
[ 279.915473] ? netlink_unicast+0x790/0x790
[ 279.916334] ? iovec_from_user.part.0+0x4d/0x220
[ 279.917293] ? netlink_unicast+0x790/0x790
[ 279.918159] sock_sendmsg+0xc5/0x190
[ 279.918938] ____sys_sendmsg+0x535/0x6b0
[ 279.919813] ? import_iovec+0x7/0x10
[ 279.920601] ? kernel_sendmsg+0x30/0x30
[ 279.921423] ? __copy_msghdr+0x3c0/0x3c0
[ 279.922254] ? import_iovec+0x7/0x10
[ 279.923041] ___sys_sendmsg+0xeb/0x170
[ 279.923854] ? copy_msghdr_from_user+0x110/0x110
[ 279.924797] ? ___sys_recvmsg+0xd9/0x130
[ 279.925630] ? __perf_event_task_sched_in+0x183/0x470
[ 279.926656] ? ___sys_sendmsg+0x170/0x170
[ 279.927529] ? ctx_sched_in+0x530/0x530
[ 279.928369] ? update_curr+0x283/0x4f0
[ 279.929185] ? perf_event_update_userpage+0x570/0x570
[ 279.930201] ? __fget_light+0x57/0x520
[ 279.931023] ? __switch_to+0x53d/0xe70
[ 279.931846] ? sockfd_lookup_light+0x1a/0x140
[ 279.932761] __sys_sendmsg+0xb5/0x140
[ 279.933560] ? __sys_sendmsg_sock+0x20/0x20
[ 279.934436] ? fpregs_assert_state_consistent+0x1d/0xa0
[ 279.935490] do_syscall_64+0x3d/0x90
[ 279.936300] entry_SYSCALL_64_after_hwframe+0x46/0xb0
[ 279.937311] RIP: 0033:0x7f21c814f887
[ 279.938085] Code: 0a 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b9 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10
[ 279.941448] RSP: 002b:00007fff11efd478 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
[ 279.942964] RAX: ffffffffffffffda RBX: 0000000064401979 RCX: 00007f21c814f887
[ 279.944337] RDX: 0000000000000000 RSI: 00007fff11efd4e0 RDI: 0000000000000003
[ 279.945660] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000
[ 279.947003] R10: 00007f21c8008708 R11: 0000000000000246 R12: 0000000000000001
[ 279.948345] R13: 0000000000409980 R14: 000000000047e538 R15: 0000000000485400
[ 279.949690] </TASK>
[ 279.950706] Allocated by task 2960:
[ 279.951471] kasan_save_stack+0x1e/0x40
[ 279.952338] kasan_set_track+0x21/0x30
[ 279.953165] __kasan_kmalloc+0x77/0x90
[ 279.954006] flow_block_cb_setup_simple+0x3dd/0x7c0
[ 279.955001] tcf_block_offload_cmd.isra.0+0x189/0x2d0
[ 279.956020] tcf_block_get_ext+0x61c/0x1200
[ 279.956881] ingress_init+0x112/0x1c0 [sch_ingress]
[ 279.957873] qdisc_create+0x401/0xea0
[ 279.958656] tc_modify_qdisc+0x6f7/0x16d0
[ 279.959506] rtnetlink_rcv_msg+0x5fe/0x9d0
[ 279.960392] netlink_rcv_skb+0x12c/0x360
[ 279.961216] netlink_unicast+0x553/0x790
[ 279.962044] netlink_sendmsg+0x7a1/0xcb0
[ 279.962906] sock_sendmsg+0xc5/0x190
[ 279.963702] ____sys_sendmsg+0x535/0x6b0
[ 279.964534] ___sys_sendmsg+0xeb/0x170
[ 279.965343] __sys_sendmsg+0xb5/0x140
[ 279.966132] do_syscall_64+0x3d/0x90
[ 279.966908] entry_SYSCALL_64_after_hwframe+0x46/0xb0
[ 279.968407] Freed by task 2960:
[ 279.969114] kasan_save_stack+0x1e/0x40
[ 279.969929] kasan_set_track+0x21/0x30
[ 279.970729] kasan_save_free_info+0x2a/0x40
[ 279.971603] ____kasan_slab_free+0x11a/0x1b0
[ 279.972483] __kmem_cache_free+0x14d/0x280
[ 279.973337] tcf_block_setup+0x29d/0x6b0
[ 279.974173] tcf_block_offload_cmd.isra.0+0x226/0x2d0
[ 279.975186] tcf_block_get_ext+0x61c/0x1200
[ 279.976080] ingress_init+0x112/0x1c0 [sch_ingress]
[ 279.977065] qdisc_create+0x401/0xea0
[ 279.977857] tc_modify_qdisc+0x6f7/0x16d0
[ 279.978695] rtnetlink_rcv_msg+0x5fe/0x9d0
[ 279.979562] netlink_rcv_skb+0x12c/0x360
[ 279.980388] netlink_unicast+0x553/0x790
[ 279.981214] netlink_sendmsg+0x7a1/0xcb0
[ 279.982043] sock_sendmsg+0xc5/0x190
[ 279.982827] ____sys_sendmsg+0x535/0x6b0
[ 279.983703] ___sys_sendmsg+0xeb/0x170
[ 279.984510] __sys_sendmsg+0xb5/0x140
[ 279.985298] do_syscall_64+0x3d/0x90
[ 279.986076] entry_SYSCALL_64_after_hwframe+0x46/0xb0
[ 279.987532] The buggy address belongs to the object at ffff888147e2bf00
which belongs to the cache kmalloc-192 of size 192
[ 279.989747] The buggy address is located 32 bytes inside of
freed 192-byte region [ffff888147e2bf00, ffff888147e2bfc0)
[ 279.992367] The buggy address belongs to the physical page:
[ 279.993430] page:00000000550f405c refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x147e2a
[ 279.995182] head:00000000550f405c order:1 entire_mapcount:0 nr_pages_mapped:0 pincount:0
[ 279.996713] anon flags: 0x200000000010200(slab|head|node=0|zone=2)
[ 279.997878] raw: 0200000000010200 ffff888100042a00 0000000000000000 dead000000000001
[ 279.999384] raw: 0000000000000000 0000000000200020 00000001ffffffff 0000000000000000
[ 280.000894] page dumped because: kasan: bad access detected
[ 280.002386] Memory state around the buggy address:
[ 280.003338] ffff888147e2be00: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 280.004781] ffff888147e2be80: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
[ 280.006224] >ffff888147e2bf00: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 280.007700] ^
[ 280.008592] ffff888147e2bf80: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
[ 280.010035] ffff888147e2c000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 280.011564] ==================================================================
Fixes:
|
||
![]() |
7e692df393 |
tcp: fix skb_copy_ubufs() vs BIG TCP
David Ahern reported crashes in skb_copy_ubufs() caused by TCP tx zerocopy
using hugepages, and skb length bigger than ~68 KB.
skb_copy_ubufs() assumed it could copy all payload using up to
MAX_SKB_FRAGS order-0 pages.
This assumption broke when BIG TCP was able to put up to 512 KB per skb.
We did not hit this bug at Google because we use CONFIG_MAX_SKB_FRAGS=45
and limit gso_max_size to 180000.
A solution is to use higher order pages if needed.
v2: add missing __GFP_COMP, or we leak memory.
Fixes:
|
||
![]() |
6f75cd166a |
net/ncsi: clear Tx enable mode when handling a Config required AEN
ncsi_channel_is_tx() determines whether a given channel should be
used for Tx or not. However, when reconfiguring the channel by
handling a Configuration Required AEN, there is a misjudgment that
the channel Tx has already been enabled, which results in the Enable
Channel Network Tx command not being sent.
Clear the channel Tx enable flag before reconfiguring the channel to
avoid the misjudgment.
Fixes:
|
||
![]() |
7fa8a8ee94 |
- Nick Piggin's "shoot lazy tlbs" series, to improve the peformance of
switching from a user process to a kernel thread. - More folio conversions from Kefeng Wang, Zhang Peng and Pankaj Raghav. - zsmalloc performance improvements from Sergey Senozhatsky. - Yue Zhao has found and fixed some data race issues around the alteration of memcg userspace tunables. - VFS rationalizations from Christoph Hellwig: - removal of most of the callers of write_one_page(). - make __filemap_get_folio()'s return value more useful - Luis Chamberlain has changed tmpfs so it no longer requires swap backing. Use `mount -o noswap'. - Qi Zheng has made the slab shrinkers operate locklessly, providing some scalability benefits. - Keith Busch has improved dmapool's performance, making part of its operations O(1) rather than O(n). - Peter Xu adds the UFFD_FEATURE_WP_UNPOPULATED feature to userfaultd, permitting userspace to wr-protect anon memory unpopulated ptes. - Kirill Shutemov has changed MAX_ORDER's meaning to be inclusive rather than exclusive, and has fixed a bunch of errors which were caused by its unintuitive meaning. - Axel Rasmussen give userfaultfd the UFFDIO_CONTINUE_MODE_WP feature, which causes minor faults to install a write-protected pte. - Vlastimil Babka has done some maintenance work on vma_merge(): cleanups to the kernel code and improvements to our userspace test harness. - Cleanups to do_fault_around() by Lorenzo Stoakes. - Mike Rapoport has moved a lot of initialization code out of various mm/ files and into mm/mm_init.c. - Lorenzo Stoakes removd vmf_insert_mixed_prot(), which was added for DRM, but DRM doesn't use it any more. - Lorenzo has also coverted read_kcore() and vread() to use iterators and has thereby removed the use of bounce buffers in some cases. - Lorenzo has also contributed further cleanups of vma_merge(). - Chaitanya Prakash provides some fixes to the mmap selftesting code. - Matthew Wilcox changes xfs and afs so they no longer take sleeping locks in ->map_page(), a step towards RCUification of pagefaults. - Suren Baghdasaryan has improved mmap_lock scalability by switching to per-VMA locking. - Frederic Weisbecker has reworked the percpu cache draining so that it no longer causes latency glitches on cpu isolated workloads. - Mike Rapoport cleans up and corrects the ARCH_FORCE_MAX_ORDER Kconfig logic. - Liu Shixin has changed zswap's initialization so we no longer waste a chunk of memory if zswap is not being used. - Yosry Ahmed has improved the performance of memcg statistics flushing. - David Stevens has fixed several issues involving khugepaged, userfaultfd and shmem. - Christoph Hellwig has provided some cleanup work to zram's IO-related code paths. - David Hildenbrand has fixed up some issues in the selftest code's testing of our pte state changing. - Pankaj Raghav has made page_endio() unneeded and has removed it. - Peter Xu contributed some rationalizations of the userfaultfd selftests. - Yosry Ahmed has fixed an issue around memcg's page recalim accounting. - Chaitanya Prakash has fixed some arm-related issues in the selftests/mm code. - Longlong Xia has improved the way in which KSM handles hwpoisoned pages. - Peter Xu fixes a few issues with uffd-wp at fork() time. - Stefan Roesch has changed KSM so that it may now be used on a per-process and per-cgroup basis. -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZEr3zQAKCRDdBJ7gKXxA jlLoAP0fpQBipwFxED0Us4SKQfupV6z4caXNJGPeay7Aj11/kQD/aMRC2uPfgr96 eMG3kwn2pqkB9ST2QpkaRbxA//eMbQY= =J+Dj -----END PGP SIGNATURE----- Merge tag 'mm-stable-2023-04-27-15-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: - Nick Piggin's "shoot lazy tlbs" series, to improve the peformance of switching from a user process to a kernel thread. - More folio conversions from Kefeng Wang, Zhang Peng and Pankaj Raghav. - zsmalloc performance improvements from Sergey Senozhatsky. - Yue Zhao has found and fixed some data race issues around the alteration of memcg userspace tunables. - VFS rationalizations from Christoph Hellwig: - removal of most of the callers of write_one_page() - make __filemap_get_folio()'s return value more useful - Luis Chamberlain has changed tmpfs so it no longer requires swap backing. Use `mount -o noswap'. - Qi Zheng has made the slab shrinkers operate locklessly, providing some scalability benefits. - Keith Busch has improved dmapool's performance, making part of its operations O(1) rather than O(n). - Peter Xu adds the UFFD_FEATURE_WP_UNPOPULATED feature to userfaultd, permitting userspace to wr-protect anon memory unpopulated ptes. - Kirill Shutemov has changed MAX_ORDER's meaning to be inclusive rather than exclusive, and has fixed a bunch of errors which were caused by its unintuitive meaning. - Axel Rasmussen give userfaultfd the UFFDIO_CONTINUE_MODE_WP feature, which causes minor faults to install a write-protected pte. - Vlastimil Babka has done some maintenance work on vma_merge(): cleanups to the kernel code and improvements to our userspace test harness. - Cleanups to do_fault_around() by Lorenzo Stoakes. - Mike Rapoport has moved a lot of initialization code out of various mm/ files and into mm/mm_init.c. - Lorenzo Stoakes removd vmf_insert_mixed_prot(), which was added for DRM, but DRM doesn't use it any more. - Lorenzo has also coverted read_kcore() and vread() to use iterators and has thereby removed the use of bounce buffers in some cases. - Lorenzo has also contributed further cleanups of vma_merge(). - Chaitanya Prakash provides some fixes to the mmap selftesting code. - Matthew Wilcox changes xfs and afs so they no longer take sleeping locks in ->map_page(), a step towards RCUification of pagefaults. - Suren Baghdasaryan has improved mmap_lock scalability by switching to per-VMA locking. - Frederic Weisbecker has reworked the percpu cache draining so that it no longer causes latency glitches on cpu isolated workloads. - Mike Rapoport cleans up and corrects the ARCH_FORCE_MAX_ORDER Kconfig logic. - Liu Shixin has changed zswap's initialization so we no longer waste a chunk of memory if zswap is not being used. - Yosry Ahmed has improved the performance of memcg statistics flushing. - David Stevens has fixed several issues involving khugepaged, userfaultfd and shmem. - Christoph Hellwig has provided some cleanup work to zram's IO-related code paths. - David Hildenbrand has fixed up some issues in the selftest code's testing of our pte state changing. - Pankaj Raghav has made page_endio() unneeded and has removed it. - Peter Xu contributed some rationalizations of the userfaultfd selftests. - Yosry Ahmed has fixed an issue around memcg's page recalim accounting. - Chaitanya Prakash has fixed some arm-related issues in the selftests/mm code. - Longlong Xia has improved the way in which KSM handles hwpoisoned pages. - Peter Xu fixes a few issues with uffd-wp at fork() time. - Stefan Roesch has changed KSM so that it may now be used on a per-process and per-cgroup basis. * tag 'mm-stable-2023-04-27-15-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (369 commits) mm,unmap: avoid flushing TLB in batch if PTE is inaccessible shmem: restrict noswap option to initial user namespace mm/khugepaged: fix conflicting mods to collapse_file() sparse: remove unnecessary 0 values from rc mm: move 'mmap_min_addr' logic from callers into vm_unmapped_area() hugetlb: pte_alloc_huge() to replace huge pte_alloc_map() maple_tree: fix allocation in mas_sparse_area() mm: do not increment pgfault stats when page fault handler retries zsmalloc: allow only one active pool compaction context selftests/mm: add new selftests for KSM mm: add new KSM process and sysfs knobs mm: add new api to enable ksm per process mm: shrinkers: fix debugfs file permissions mm: don't check VMA write permissions if the PTE/PMD indicates write permissions migrate_pages_batch: fix statistics for longterm pin retry userfaultfd: use helper function range_in_vma() lib/show_mem.c: use for_each_populated_zone() simplify code mm: correct arg in reclaim_pages()/reclaim_clean_pages_from_list() fs/buffer: convert create_page_buffers to folio_create_buffers fs/buffer: add folio_create_empty_buffers helper ... |
||
![]() |
b6a7828502 |
modules-6.4-rc1
The summary of the changes for this pull requests is: * Song Liu's new struct module_memory replacement * Nick Alcock's MODULE_LICENSE() removal for non-modules * My cleanups and enhancements to reduce the areas where we vmalloc module memory for duplicates, and the respective debug code which proves the remaining vmalloc pressure comes from userspace. Most of the changes have been in linux-next for quite some time except the minor fixes I made to check if a module was already loaded prior to allocating the final module memory with vmalloc and the respective debug code it introduces to help clarify the issue. Although the functional change is small it is rather safe as it can only *help* reduce vmalloc space for duplicates and is confirmed to fix a bootup issue with over 400 CPUs with KASAN enabled. I don't expect stable kernels to pick up that fix as the cleanups would have also had to have been picked up. Folks on larger CPU systems with modules will want to just upgrade if vmalloc space has been an issue on bootup. Given the size of this request, here's some more elaborate details on this pull request. The functional change change in this pull request is the very first patch from Song Liu which replaces the struct module_layout with a new struct module memory. The old data structure tried to put together all types of supported module memory types in one data structure, the new one abstracts the differences in memory types in a module to allow each one to provide their own set of details. This paves the way in the future so we can deal with them in a cleaner way. If you look at changes they also provide a nice cleanup of how we handle these different memory areas in a module. This change has been in linux-next since before the merge window opened for v6.3 so to provide more than a full kernel cycle of testing. It's a good thing as quite a bit of fixes have been found for it. Jason Baron then made dynamic debug a first class citizen module user by using module notifier callbacks to allocate / remove module specific dynamic debug information. Nick Alcock has done quite a bit of work cross-tree to remove module license tags from things which cannot possibly be module at my request so to: a) help him with his longer term tooling goals which require a deterministic evaluation if a piece a symbol code could ever be part of a module or not. But quite recently it is has been made clear that tooling is not the only one that would benefit. Disambiguating symbols also helps efforts such as live patching, kprobes and BPF, but for other reasons and R&D on this area is active with no clear solution in sight. b) help us inch closer to the now generally accepted long term goal of automating all the MODULE_LICENSE() tags from SPDX license tags In so far as a) is concerned, although module license tags are a no-op for non-modules, tools which would want create a mapping of possible modules can only rely on the module license tag after the commit |
||
![]() |
b3cbf98e2f |
SUNRPC: Support TLS handshake in the server-side TCP socket code
This patch adds opportunitistic RPC-with-TLS to the Linux in-kernel NFS server. If the client requests RPC-with-TLS and the user space handshake agent is running, the server will set up a TLS session. There are no policy settings yet. For example, the server cannot yet require the use of RPC-with-TLS to access its data. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> |
||
![]() |
695bc1f32c |
SUNRPC: Clear rq_xid when receiving a new RPC Call
This is an eye-catcher for tracepoints that record the XID: it means svc_rqst() has not received a full RPC Call with an XID yet. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> |
||
![]() |
5e052dda12 |
SUNRPC: Recognize control messages in server-side TCP socket code
To support kTLS, the server-side TCP socket receive path needs to watch for CMSGs. Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> |
||
![]() |
6a0cdf56bf |
SUNRPC: Be even lazier about releasing pages
A single RPC transaction that touches only a couple of pages means rq_pvec will not be even close to full in svc_xpt_release(). This is a common case. Instead, just leave the pages in rq_pvec until it is completely full. This improves the efficiency of the batch release mechanism on workloads that involve small RPC messages. The rq_pvec is also fully emptied just before thread exit. Reviewed-by: Calum Mackay <calum.mackay@oracle.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> |
||
![]() |
556eb8b791 |
Driver core changes for 6.4-rc1
Here is the large set of driver core changes for 6.4-rc1. Once again, a busy development cycle, with lots of changes happening in the driver core in the quest to be able to move "struct bus" and "struct class" into read-only memory, a task now complete with these changes. This will make the future rust interactions with the driver core more "provably correct" as well as providing more obvious lifetime rules for all busses and classes in the kernel. The changes required for this did touch many individual classes and busses as many callbacks were changed to take const * parameters instead. All of these changes have been submitted to the various subsystem maintainers, giving them plenty of time to review, and most of them actually did so. Other than those changes, included in here are a small set of other things: - kobject logging improvements - cacheinfo improvements and updates - obligatory fw_devlink updates and fixes - documentation updates - device property cleanups and const * changes - firwmare loader dependency fixes. All of these have been in linux-next for a while with no reported problems. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZEp7Sw8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ykitQCfamUHpxGcKOAGuLXMotXNakTEsxgAoIquENm5 LEGadNS38k5fs+73UaxV =7K4B -----END PGP SIGNATURE----- Merge tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the large set of driver core changes for 6.4-rc1. Once again, a busy development cycle, with lots of changes happening in the driver core in the quest to be able to move "struct bus" and "struct class" into read-only memory, a task now complete with these changes. This will make the future rust interactions with the driver core more "provably correct" as well as providing more obvious lifetime rules for all busses and classes in the kernel. The changes required for this did touch many individual classes and busses as many callbacks were changed to take const * parameters instead. All of these changes have been submitted to the various subsystem maintainers, giving them plenty of time to review, and most of them actually did so. Other than those changes, included in here are a small set of other things: - kobject logging improvements - cacheinfo improvements and updates - obligatory fw_devlink updates and fixes - documentation updates - device property cleanups and const * changes - firwmare loader dependency fixes. All of these have been in linux-next for a while with no reported problems" * tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (120 commits) device property: make device_property functions take const device * driver core: update comments in device_rename() driver core: Don't require dynamic_debug for initcall_debug probe timing firmware_loader: rework crypto dependencies firmware_loader: Strip off \n from customized path zram: fix up permission for the hot_add sysfs file cacheinfo: Add use_arch[|_cache]_info field/function arch_topology: Remove early cacheinfo error message if -ENOENT cacheinfo: Check cache properties are present in DT cacheinfo: Check sib_leaf in cache_leaves_are_shared() cacheinfo: Allow early level detection when DT/ACPI info is missing/broken cacheinfo: Add arm64 early level initializer implementation cacheinfo: Add arch specific early level initializer tty: make tty_class a static const structure driver core: class: remove struct class_interface * from callbacks driver core: class: mark the struct class in struct class_interface constant driver core: class: make class_register() take a const * driver core: class: mark class_release() as taking a const * driver core: remove incorrect comment for device_create* MIPS: vpe-cmp: remove module owner pointer from struct class usage. ... |
||
![]() |
1b483d9f58 |
net/sched: act_pedit: free pedit keys on bail from offset check
Ido Schimmel reports a memleak on a syzkaller instance:
BUG: memory leak
unreferenced object 0xffff88803d45e400 (size 1024):
comm "syz-executor292", pid 563, jiffies 4295025223 (age 51.781s)
hex dump (first 32 bytes):
28 bd 70 00 fb db df 25 02 00 14 1f ff 02 00 02 (.p....%........
00 32 00 00 1f 00 00 00 ac 14 14 3e 08 00 07 00 .2.........>....
backtrace:
[<ffffffff81bd0f2c>] kmemleak_alloc_recursive include/linux/kmemleak.h:42 [inline]
[<ffffffff81bd0f2c>] slab_post_alloc_hook mm/slab.h:772 [inline]
[<ffffffff81bd0f2c>] slab_alloc_node mm/slub.c:3452 [inline]
[<ffffffff81bd0f2c>] __kmem_cache_alloc_node+0x25c/0x320 mm/slub.c:3491
[<ffffffff81a865d9>] __do_kmalloc_node mm/slab_common.c:966 [inline]
[<ffffffff81a865d9>] __kmalloc+0x59/0x1a0 mm/slab_common.c:980
[<ffffffff83aa85c3>] kmalloc include/linux/slab.h:584 [inline]
[<ffffffff83aa85c3>] tcf_pedit_init+0x793/0x1ae0 net/sched/act_pedit.c:245
[<ffffffff83a90623>] tcf_action_init_1+0x453/0x6e0 net/sched/act_api.c:1394
[<ffffffff83a90e58>] tcf_action_init+0x5a8/0x950 net/sched/act_api.c:1459
[<ffffffff83a96258>] tcf_action_add+0x118/0x4e0 net/sched/act_api.c:1985
[<ffffffff83a96997>] tc_ctl_action+0x377/0x490 net/sched/act_api.c:2044
[<ffffffff83920a8d>] rtnetlink_rcv_msg+0x46d/0xd70 net/core/rtnetlink.c:6395
[<ffffffff83b24305>] netlink_rcv_skb+0x185/0x490 net/netlink/af_netlink.c:2575
[<ffffffff83901806>] rtnetlink_rcv+0x26/0x30 net/core/rtnetlink.c:6413
[<ffffffff83b21cae>] netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline]
[<ffffffff83b21cae>] netlink_unicast+0x5be/0x8a0 net/netlink/af_netlink.c:1365
[<ffffffff83b2293f>] netlink_sendmsg+0x9af/0xed0 net/netlink/af_netlink.c:1942
[<ffffffff8380c39f>] sock_sendmsg_nosec net/socket.c:724 [inline]
[<ffffffff8380c39f>] sock_sendmsg net/socket.c:747 [inline]
[<ffffffff8380c39f>] ____sys_sendmsg+0x3ef/0xaa0 net/socket.c:2503
[<ffffffff838156d2>] ___sys_sendmsg+0x122/0x1c0 net/socket.c:2557
[<ffffffff8381594f>] __sys_sendmsg+0x11f/0x200 net/socket.c:2586
[<ffffffff83815ab0>] __do_sys_sendmsg net/socket.c:2595 [inline]
[<ffffffff83815ab0>] __se_sys_sendmsg net/socket.c:2593 [inline]
[<ffffffff83815ab0>] __x64_sys_sendmsg+0x80/0xc0 net/socket.c:2593
The recently added static offset check missed a free to the key buffer when
bailing out on error.
Fixes:
|
||
![]() |
32eff6bace |
net/sched: flower: Fix wrong handle assignment during filter change
Commit |
||
![]() |
2b5fdc0f5c |
rxrpc: Fix potential data race in rxrpc_wait_to_be_connected()
Inside the loop in rxrpc_wait_to_be_connected() it checks call->error to
see if it should exit the loop without first checking the call state. This
is probably safe as if call->error is set, the call is dead anyway, but we
should probably wait for the call state to have been set to completion
first, lest it cause surprise on the way out.
Fix this by only accessing call->error if the call is complete. We don't
actually need to access the error inside the loop as we'll do that after.
This caused the following report:
BUG: KCSAN: data-race in rxrpc_send_data / rxrpc_set_call_completion
write to 0xffff888159cf3c50 of 4 bytes by task 25673 on cpu 1:
rxrpc_set_call_completion+0x71/0x1c0 net/rxrpc/call_state.c:22
rxrpc_send_data_packet+0xba9/0x1650 net/rxrpc/output.c:479
rxrpc_transmit_one+0x1e/0x130 net/rxrpc/output.c:714
rxrpc_decant_prepared_tx net/rxrpc/call_event.c:326 [inline]
rxrpc_transmit_some_data+0x496/0x600 net/rxrpc/call_event.c:350
rxrpc_input_call_event+0x564/0x1220 net/rxrpc/call_event.c:464
rxrpc_io_thread+0x307/0x1d80 net/rxrpc/io_thread.c:461
kthread+0x1ac/0x1e0 kernel/kthread.c:376
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308
read to 0xffff888159cf3c50 of 4 bytes by task 25672 on cpu 0:
rxrpc_send_data+0x29e/0x1950 net/rxrpc/sendmsg.c:296
rxrpc_do_sendmsg+0xb7a/0xc20 net/rxrpc/sendmsg.c:726
rxrpc_sendmsg+0x413/0x520 net/rxrpc/af_rxrpc.c:565
sock_sendmsg_nosec net/socket.c:724 [inline]
sock_sendmsg net/socket.c:747 [inline]
____sys_sendmsg+0x375/0x4c0 net/socket.c:2501
___sys_sendmsg net/socket.c:2555 [inline]
__sys_sendmmsg+0x263/0x500 net/socket.c:2641
__do_sys_sendmmsg net/socket.c:2670 [inline]
__se_sys_sendmmsg net/socket.c:2667 [inline]
__x64_sys_sendmmsg+0x57/0x60 net/socket.c:2667
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
value changed: 0x00000000 -> 0xffffffea
Fixes:
|
||
![]() |
6e98b09da9 |
Networking changes for 6.4.
Core ---- - Introduce a config option to tweak MAX_SKB_FRAGS. Increasing the default value allows for better BIG TCP performances. - Reduce compound page head access for zero-copy data transfers. - RPS/RFS improvements, avoiding unneeded NET_RX_SOFTIRQ when possible. - Threaded NAPI improvements, adding defer skb free support and unneeded softirq avoidance. - Address dst_entry reference count scalability issues, via false sharing avoidance and optimize refcount tracking. - Add lockless accesses annotation to sk_err[_soft]. - Optimize again the skb struct layout. - Extends the skb drop reasons to make it usable by multiple subsystems. - Better const qualifier awareness for socket casts. BPF --- - Add skb and XDP typed dynptrs which allow BPF programs for more ergonomic and less brittle iteration through data and variable-sized accesses. - Add a new BPF netfilter program type and minimal support to hook BPF programs to netfilter hooks such as prerouting or forward. - Add more precise memory usage reporting for all BPF map types. - Adds support for using {FOU,GUE} encap with an ipip device operating in collect_md mode and add a set of BPF kfuncs for controlling encap params. - Allow BPF programs to detect at load time whether a particular kfunc exists or not, and also add support for this in light skeleton. - Bigger batch of BPF verifier improvements to prepare for upcoming BPF open-coded iterators allowing for less restrictive looping capabilities. - Rework RCU enforcement in the verifier, add kptr_rcu and enforce BPF programs to NULL-check before passing such pointers into kfunc. - Add support for kptrs in percpu hashmaps, percpu LRU hashmaps and in local storage maps. - Enable RCU semantics for task BPF kptrs and allow referenced kptr tasks to be stored in BPF maps. - Add support for refcounted local kptrs to the verifier for allowing shared ownership, useful for adding a node to both the BPF list and rbtree. - Add BPF verifier support for ST instructions in convert_ctx_access() which will help new -mcpu=v4 clang flag to start emitting them. - Add ARM32 USDT support to libbpf. - Improve bpftool's visual program dump which produces the control flow graph in a DOT format by adding C source inline annotations. Protocols --------- - IPv4: Allow adding to IPv4 address a 'protocol' tag. Such value indicates the provenance of the IP address. - IPv6: optimize route lookup, dropping unneeded R/W lock acquisition. - Add the handshake upcall mechanism, allowing the user-space to implement generic TLS handshake on kernel's behalf. - Bridge: support per-{Port, VLAN} neighbor suppression, increasing resilience to nodes failures. - SCTP: add support for Fair Capacity and Weighted Fair Queueing schedulers. - MPTCP: delay first subflow allocation up to its first usage. This will allow for later better LSM interaction. - xfrm: Remove inner/outer modes from input/output path. These are not needed anymore. - WiFi: - reduced neighbor report (RNR) handling for AP mode - HW timestamping support - support for randomized auth/deauth TA for PASN privacy - per-link debugfs for multi-link - TC offload support for mac80211 drivers - mac80211 mesh fast-xmit and fast-rx support - enable Wi-Fi 7 (EHT) mesh support Netfilter --------- - Add nf_tables 'brouting' support, to force a packet to be routed instead of being bridged. - Update bridge netfilter and ovs conntrack helpers to handle IPv6 Jumbo packets properly, i.e. fetch the packet length from hop-by-hop extension header. This is needed for BIT TCP support. - The iptables 32bit compat interface isn't compiled in by default anymore. - Move ip(6)tables builtin icmp matches to the udptcp one. This has the advantage that icmp/icmpv6 match doesn't load the iptables/ip6tables modules anymore when iptables-nft is used. - Extended netlink error report for netdevice in flowtables and netdev/chains. Allow for incrementally add/delete devices to netdev basechain. Allow to create netdev chain without device. Driver API ---------- - Remove redundant Device Control Error Reporting Enable, as PCI core has already error reporting enabled at enumeration time. - Move Multicast DB netlink handlers to core, allowing devices other then bridge to use them. - Allow the page_pool to directly recycle the pages from safely localized NAPI. - Implement lockless TX queue stop/wake combo macros, allowing for further code de-duplication and sanitization. - Add YNL support for user headers and struct attrs. - Add partial YNL specification for devlink. - Add partial YNL specification for ethtool. - Add tc-mqprio and tc-taprio support for preemptible traffic classes. - Add tx push buf len param to ethtool, specifies the maximum number of bytes of a transmitted packet a driver can push directly to the underlying device. - Add basic LED support for switch/phy. - Add NAPI documentation, stop relaying on external links. - Convert dsa_master_ioctl() to netdev notifier. This is a preparatory work to make the hardware timestamping layer selectable by user space. - Add transceiver support and improve the error messages for CAN-FD controllers. New hardware / drivers ---------------------- - Ethernet: - AMD/Pensando core device support - MediaTek MT7981 SoC - MediaTek MT7988 SoC - Broadcom BCM53134 embedded switch - Texas Instruments CPSW9G ethernet switch - Qualcomm EMAC3 DWMAC ethernet - StarFive JH7110 SoC - NXP CBTX ethernet PHY - WiFi: - Apple M1 Pro/Max devices - RealTek rtl8710bu/rtl8188gu - RealTek rtl8822bs, rtl8822cs and rtl8821cs SDIO chipset - Bluetooth: - Realtek RTL8821CS, RTL8851B, RTL8852BS - Mediatek MT7663, MT7922 - NXP w8997 - Actions Semi ATS2851 - QTI WCN6855 - Marvell 88W8997 - Can: - STMicroelectronics bxcan stm32f429 Drivers ------- - Ethernet NICs: - Intel (1G, icg): - add tracking and reporting of QBV config errors. - add support for configuring max SDU for each Tx queue. - Intel (100G, ice): - refactor mailbox overflow detection to support Scalable IOV - GNSS interface optimization - Intel (i40e): - support XDP multi-buffer - nVidia/Mellanox: - add the support for linux bridge multicast offload - enable TC offload for egress and engress MACVLAN over bond - add support for VxLAN GBP encap/decap flows offload - extend packet offload to fully support libreswan - support tunnel mode in mlx5 IPsec packet offload - extend XDP multi-buffer support - support MACsec VLAN offload - add support for dynamic msix vectors allocation - drop RX page_cache and fully use page_pool - implement thermal zone to report NIC temperature - Netronome/Corigine: - add support for multi-zone conntrack offload - Solarflare/Xilinx: - support offloading TC VLAN push/pop actions to the MAE - support TC decap rules - support unicast PTP - Other NICs: - Broadcom (bnxt): enforce software based freq adjustments only on shared PHC NIC - RealTek (r8169): refactor to addess ASPM issues during NAPI poll. - Micrel (lan8841): add support for PTP_PF_PEROUT - Cadence (macb): enable PTP unicast - Engleder (tsnep): add XDP socket zero-copy support - virtio-net: implement exact header length guest feature - veth: add page_pool support for page recycling - vxlan: add MDB data path support - gve: add XDP support for GQI-QPL format - geneve: accept every ethertype - macvlan: allow some packets to bypass broadcast queue - mana: add support for jumbo frame - Ethernet high-speed switches: - Microchip (sparx5): Add support for TC flower templates. - Ethernet embedded switches: - Broadcom (b54): - configure 6318 and 63268 RGMII ports - Marvell (mv88e6xxx): - faster C45 bus scan - Microchip: - lan966x: - add support for IS1 VCAP - better TX/RX from/to CPU performances - ksz9477: add ETS Qdisc support - ksz8: enhance static MAC table operations and error handling - sama7g5: add PTP capability - NXP (ocelot): - add support for external ports - add support for preemptible traffic classes - Texas Instruments: - add CPSWxG SGMII support for J7200 and J721E - Intel WiFi (iwlwifi): - preparation for Wi-Fi 7 EHT and multi-link support - EHT (Wi-Fi 7) sniffer support - hardware timestamping support for some devices/firwmares - TX beacon protection on newer hardware - Qualcomm 802.11ax WiFi (ath11k): - MU-MIMO parameters support - ack signal support for management packets - RealTek WiFi (rtw88): - SDIO bus support - better support for some SDIO devices (e.g. MAC address from efuse) - RealTek WiFi (rtw89): - HW scan support for 8852b - better support for 6 GHz scanning - support for various newer firmware APIs - framework firmware backwards compatibility - MediaTek WiFi (mt76): - P2P support - mesh A-MSDU support - EHT (Wi-Fi 7) support - coredump support Signed-off-by: Paolo Abeni <pabeni@redhat.com> -----BEGIN PGP SIGNATURE----- iQJGBAABCAAwFiEEg1AjqC77wbdLX2LbKSR5jcyPE6QFAmRI/mUSHHBhYmVuaUBy ZWRoYXQuY29tAAoJECkkeY3MjxOkgO0QAJGxpuN67YgYV0BIM+/atWKEEexJYG7B 9MMpU4jMO3EW/pUS5t7VRsBLUybLYVPmqCZoHodObDfnu59jiPOegb6SikJv/ZwJ Zw62PVk5MvDnQjlu4e6kDcGwkplteN08TlgI+a49BUTedpdFitrxHAYGW8f2fRO6 cK2XSld+ZucMoym5vRwf8yWS1BwdxnslPMxDJ+/8ZbWBZv44qAnG2vMB/kIx7ObC Vel/4m6MzTwVsLYBsRvcwMVbNNlZ9GuhztlTzEbfGA4ZhTadIAMgb5VTWXB84Ws7 Aic5wTdli+q+x6/2cxhbyeoVuB9HHObYmLBAciGg4GNljP5rnQBY3X3+KVZ/x9TI HQB7CmhxmAZVrO9pLARFV+ECrMTH2/dy3NyrZ7uYQ3WPOXJi8hJZjOTO/eeEGL7C eTjdz0dZBWIBK2gON/6s4nExXVQUTEF2ZsPi52jTTClKjfe5pz/ddeFQIWaY1DTm pInEiWPAvd28JyiFmhFNHsuIBCjX/Zqe2JuMfMBeBibDAC09o/OGdKJYUI15AiRf F46Pdb7use/puqfrYW44kSAfaPYoBiE+hj1RdeQfen35xD9HVE4vdnLNeuhRlFF9 aQfyIRHYQofkumRDr5f8JEY66cl9NiKQ4IVW1xxQfYDNdC6wQqREPG1md7rJVMrJ vP7ugFnttneg =ITVa -----END PGP SIGNATURE----- Merge tag 'net-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Paolo Abeni: "Core: - Introduce a config option to tweak MAX_SKB_FRAGS. Increasing the default value allows for better BIG TCP performances - Reduce compound page head access for zero-copy data transfers - RPS/RFS improvements, avoiding unneeded NET_RX_SOFTIRQ when possible - Threaded NAPI improvements, adding defer skb free support and unneeded softirq avoidance - Address dst_entry reference count scalability issues, via false sharing avoidance and optimize refcount tracking - Add lockless accesses annotation to sk_err[_soft] - Optimize again the skb struct layout - Extends the skb drop reasons to make it usable by multiple subsystems - Better const qualifier awareness for socket casts BPF: - Add skb and XDP typed dynptrs which allow BPF programs for more ergonomic and less brittle iteration through data and variable-sized accesses - Add a new BPF netfilter program type and minimal support to hook BPF programs to netfilter hooks such as prerouting or forward - Add more precise memory usage reporting for all BPF map types - Adds support for using {FOU,GUE} encap with an ipip device operating in collect_md mode and add a set of BPF kfuncs for controlling encap params - Allow BPF programs to detect at load time whether a particular kfunc exists or not, and also add support for this in light skeleton - Bigger batch of BPF verifier improvements to prepare for upcoming BPF open-coded iterators allowing for less restrictive looping capabilities - Rework RCU enforcement in the verifier, add kptr_rcu and enforce BPF programs to NULL-check before passing such pointers into kfunc - Add support for kptrs in percpu hashmaps, percpu LRU hashmaps and in local storage maps - Enable RCU semantics for task BPF kptrs and allow referenced kptr tasks to be stored in BPF maps - Add support for refcounted local kptrs to the verifier for allowing shared ownership, useful for adding a node to both the BPF list and rbtree - Add BPF verifier support for ST instructions in convert_ctx_access() which will help new -mcpu=v4 clang flag to start emitting them - Add ARM32 USDT support to libbpf - Improve bpftool's visual program dump which produces the control flow graph in a DOT format by adding C source inline annotations Protocols: - IPv4: Allow adding to IPv4 address a 'protocol' tag. Such value indicates the provenance of the IP address - IPv6: optimize route lookup, dropping unneeded R/W lock acquisition - Add the handshake upcall mechanism, allowing the user-space to implement generic TLS handshake on kernel's behalf - Bridge: support per-{Port, VLAN} neighbor suppression, increasing resilience to nodes failures - SCTP: add support for Fair Capacity and Weighted Fair Queueing schedulers - MPTCP: delay first subflow allocation up to its first usage. This will allow for later better LSM interaction - xfrm: Remove inner/outer modes from input/output path. These are not needed anymore - WiFi: - reduced neighbor report (RNR) handling for AP mode - HW timestamping support - support for randomized auth/deauth TA for PASN privacy - per-link debugfs for multi-link - TC offload support for mac80211 drivers - mac80211 mesh fast-xmit and fast-rx support - enable Wi-Fi 7 (EHT) mesh support Netfilter: - Add nf_tables 'brouting' support, to force a packet to be routed instead of being bridged - Update bridge netfilter and ovs conntrack helpers to handle IPv6 Jumbo packets properly, i.e. fetch the packet length from hop-by-hop extension header. This is needed for BIT TCP support - The iptables 32bit compat interface isn't compiled in by default anymore - Move ip(6)tables builtin icmp matches to the udptcp one. This has the advantage that icmp/icmpv6 match doesn't load the iptables/ip6tables modules anymore when iptables-nft is used - Extended netlink error report for netdevice in flowtables and netdev/chains. Allow for incrementally add/delete devices to netdev basechain. Allow to create netdev chain without device Driver API: - Remove redundant Device Control Error Reporting Enable, as PCI core has already error reporting enabled at enumeration time - Move Multicast DB netlink handlers to core, allowing devices other then bridge to use them - Allow the page_pool to directly recycle the pages from safely localized NAPI - Implement lockless TX queue stop/wake combo macros, allowing for further code de-duplication and sanitization - Add YNL support for user headers and struct attrs - Add partial YNL specification for devlink - Add partial YNL specification for ethtool - Add tc-mqprio and tc-taprio support for preemptible traffic classes - Add tx push buf len param to ethtool, specifies the maximum number of bytes of a transmitted packet a driver can push directly to the underlying device - Add basic LED support for switch/phy - Add NAPI documentation, stop relaying on external links - Convert dsa_master_ioctl() to netdev notifier. This is a preparatory work to make the hardware timestamping layer selectable by user space - Add transceiver support and improve the error messages for CAN-FD controllers New hardware / drivers: - Ethernet: - AMD/Pensando core device support - MediaTek MT7981 SoC - MediaTek MT7988 SoC - Broadcom BCM53134 embedded switch - Texas Instruments CPSW9G ethernet switch - Qualcomm EMAC3 DWMAC ethernet - StarFive JH7110 SoC - NXP CBTX ethernet PHY - WiFi: - Apple M1 Pro/Max devices - RealTek rtl8710bu/rtl8188gu - RealTek rtl8822bs, rtl8822cs and rtl8821cs SDIO chipset - Bluetooth: - Realtek RTL8821CS, RTL8851B, RTL8852BS - Mediatek MT7663, MT7922 - NXP w8997 - Actions Semi ATS2851 - QTI WCN6855 - Marvell 88W8997 - Can: - STMicroelectronics bxcan stm32f429 Drivers: - Ethernet NICs: - Intel (1G, icg): - add tracking and reporting of QBV config errors - add support for configuring max SDU for each Tx queue - Intel (100G, ice): - refactor mailbox overflow detection to support Scalable IOV - GNSS interface optimization - Intel (i40e): - support XDP multi-buffer - nVidia/Mellanox: - add the support for linux bridge multicast offload - enable TC offload for egress and engress MACVLAN over bond - add support for VxLAN GBP encap/decap flows offload - extend packet offload to fully support libreswan - support tunnel mode in mlx5 IPsec packet offload - extend XDP multi-buffer support - support MACsec VLAN offload - add support for dynamic msix vectors allocation - drop RX page_cache and fully use page_pool - implement thermal zone to report NIC temperature - Netronome/Corigine: - add support for multi-zone conntrack offload - Solarflare/Xilinx: - support offloading TC VLAN push/pop actions to the MAE - support TC decap rules - support unicast PTP - Other NICs: - Broadcom (bnxt): enforce software based freq adjustments only on shared PHC NIC - RealTek (r8169): refactor to addess ASPM issues during NAPI poll - Micrel (lan8841): add support for PTP_PF_PEROUT - Cadence (macb): enable PTP unicast - Engleder (tsnep): add XDP socket zero-copy support - virtio-net: implement exact header length guest feature - veth: add page_pool support for page recycling - vxlan: add MDB data path support - gve: add XDP support for GQI-QPL format - geneve: accept every ethertype - macvlan: allow some packets to bypass broadcast queue - mana: add support for jumbo frame - Ethernet high-speed switches: - Microchip (sparx5): Add support for TC flower templates - Ethernet embedded switches: - Broadcom (b54): - configure 6318 and 63268 RGMII ports - Marvell (mv88e6xxx): - faster C45 bus scan - Microchip: - lan966x: - add support for IS1 VCAP - better TX/RX from/to CPU performances - ksz9477: add ETS Qdisc support - ksz8: enhance static MAC table operations and error handling - sama7g5: add PTP capability - NXP (ocelot): - add support for external ports - add support for preemptible traffic classes - Texas Instruments: - add CPSWxG SGMII support for J7200 and J721E - Intel WiFi (iwlwifi): - preparation for Wi-Fi 7 EHT and multi-link support - EHT (Wi-Fi 7) sniffer support - hardware timestamping support for some devices/firwmares - TX beacon protection on newer hardware - Qualcomm 802.11ax WiFi (ath11k): - MU-MIMO parameters support - ack signal support for management packets - RealTek WiFi (rtw88): - SDIO bus support - better support for some SDIO devices (e.g. MAC address from efuse) - RealTek WiFi (rtw89): - HW scan support for 8852b - better support for 6 GHz scanning - support for various newer firmware APIs - framework firmware backwards compatibility - MediaTek WiFi (mt76): - P2P support - mesh A-MSDU support - EHT (Wi-Fi 7) support - coredump support" * tag 'net-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2078 commits) net: phy: hide the PHYLIB_LEDS knob net: phy: marvell-88x2222: remove unnecessary (void*) conversions tcp/udp: Fix memleaks of sk and zerocopy skbs with TX timestamp. net: amd: Fix link leak when verifying config failed net: phy: marvell: Fix inconsistent indenting in led_blink_set lan966x: Don't use xdp_frame when action is XDP_TX tsnep: Add XDP socket zero-copy TX support tsnep: Add XDP socket zero-copy RX support tsnep: Move skb receive action to separate function tsnep: Add functions for queue enable/disable tsnep: Rework TX/RX queue initialization tsnep: Replace modulo operation with mask net: phy: dp83867: Add led_brightness_set support net: phy: Fix reading LED reg property drivers: nfc: nfcsim: remove return value check of `dev_dir` net: phy: dp83867: Remove unnecessary (void*) conversions net: ethtool: coalesce: try to make user settings stick twice net: mana: Check if netdev/napi_alloc_frag returns single page net: mana: Rename mana_refill_rxoob and remove some empty lines net: veth: add page_pool stats ... |
||
![]() |
647a2a6428 |
SUNRPC: Convert svc_xprt_release() to the release_pages() API
Instead of invoking put_page() one-at-a-time, pass the "response" portion of rq_pages directly to release_pages() to reduce the number of times each nfsd thread invokes a page allocator API. Since svc_xprt_release() is not invoked while a client is waiting for an RPC Reply, this is not expected to directly impact mean request latencies on a lightly or moderately loaded server. However as workload intensity increases, I expect somewhat better scalability: the same number of server threads should be able to handle more work. Reviewed-by: Calum Mackay <calum.mackay@oracle.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> |
||
![]() |
b20cb39def |
SUNRPC: Relocate svc_free_res_pages()
Clean-up: There doesn't seem to be a reason why this function is stuck in a header. One thing it prevents is the convenient addition of tracing. Moving it to a source file also makes the rq_respages clean-up logic easier to find. Reviewed-by: Calum Mackay <calum.mackay@oracle.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> |
||
![]() |
55fcc7d915 |
SUNRPC: Ignore return value of ->xpo_sendto
Clean up: All callers of svc_process() ignore its return value, so svc_process() can safely be converted to return void. Ditto for svc_send(). The return value of ->xpo_sendto() is now used only as part of a trace event. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> |
||
![]() |
ae0d77708a |
SUNRPC: Ensure server-side sockets have a sock->file
The TLS handshake upcall mechanism requires a non-NULL sock->file on the socket it hands to user space. svc_sock_free() already releases sock->file properly if one exists. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> |
||
![]() |
0f5162480b |
NFSD: Watch for rq_pages bounds checking errors in nfsd_splice_actor()
There have been several bugs over the years where the NFSD splice actor has attempted to write outside the rq_pages array. This is a "should never happen" condition, but if for some reason the pipe splice actor should attempt to walk past the end of rq_pages, it needs to terminate the READ operation to prevent corruption of the pointer addresses in the fields just beyond the array. A server crash is thus prevented. Since the code is not behaving, the READ operation returns -EIO to the client. None of the READ payload data can be trusted if the splice actor isn't operating as expected. Suggested-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> |
||
![]() |
376bcd9b37 |
sunrpc: simplify two-level sysctl registration for svcrdma_parm_table
There is no need to declare two tables to just create directories, this can be easily be done with a prefix path with register_sysctl(). Simplify this registration. Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> |
||
![]() |
cf64b9bce9 |
SUNRPC: return proper error from get_expiry()
The get_expiry() function currently returns a timestamp, and uses the special return value of 0 to indicate an error. Unfortunately this causes a problem when 0 is the correct return value. On a system with no RTC it is possible that the boot time will be seen to be "3". When exportfs probes to see if a particular filesystem supports NFS export it tries to cache information with an expiry time of "3". The intention is for this to be "long in the past". Even with no RTC it will not be far in the future (at most a second or two) so this is harmless. But if the boot time happens to have been calculated to be "3", then get_expiry will fail incorrectly as it converts the number to "seconds since bootime" - 0. To avoid this problem we change get_expiry() to report the error quite separately from the expiry time. The error is now the return value. The expiry time is reported through a by-reference parameter. Reported-by: Jerry Zhang <jerry@skydio.com> Tested-by: Jerry Zhang <jerry@skydio.com> Signed-off-by: NeilBrown <neilb@suse.de> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> |
||
![]() |
c248b27cfc |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
No conflicts. Signed-off-by: Paolo Abeni <pabeni@redhat.com> |
||
![]() |
793582ff47 |
ACPI updates for 6.4-rc1
- Update the ACPICA code in the kernel to upstream revision 20230331 including the following changes: * Delete bogus node_array array of pointers from AEST table (Jessica Clarke). * Add support for trace buffer extension in GICC to the ACPI MADT parser (Xiongfeng Wang). * Add missing macro ACPI_FUNCTION_TRACE() for acpi_ns_repair_HID() (Xiongfeng Wang). * Add missing tables to astable (Pedro Falcato). * Add support for 64 bit loong_arch compilation to ACPICA (Huacai Chen). * Add support for ASPT table in disassembler to ACPICA (Jeremi Piotrowski). * Add support for Arm's MPAM ACPI table version 2 (Hesham Almatary). * Update all copyrights/signons in ACPICA to 2023 (Bob Moore). * Add support for ClockInput resource (v6.5) (Niyas Sait). * Add RISC-V INTC interrupt controller definition to the list of supported interrupt controllers for MADT (Sunil V L). * Add structure definitions for the RISC-V RHCT ACPI table (Sunil V L). * Address several cases in which the ACPICA code might lead to undefined behavior (Tamir Duberstein). * Make ACPICA code support flexible arrays properly (Kees Cook). * Check null return of ACPI_ALLOCATE_ZEROED in acpi_db_display_objects() (void0red). * Add os specific support for Zephyr RTOS to ACPICA (Najumon). * Update version to 20230331 (Bob Moore). - Fix evaluating the _PDC ACPI control method when running as Xen dom0 (Roger Pau Monne). - Use platform devices to load ACPI PPC and PCC drivers (Petr Pavlu). - Check for null return of devm_kzalloc() in fch_misc_setup() (Kang Chen). - Log a message if enable_irq_wake() fails for the ACPI SCI (Simon Gaiser). - Initialize the correct IOMMU fwspec while parsing ACPI VIOT (Jean-Philippe Brucker). - Amend indentation and prefix error messages with FW_BUG in the ACPI SPCR parsing code (Andy Shevchenko). - Enable ACPI sysfs support for CCEL records (Kuppuswamy Sathyanarayanan). - Make the APEI error injection code warn on invalid arguments when explicitly indicated by platform (Shuai Xue). - Add CXL error types to the error injection code in APEI (Tony Luck). - Refactor acpi_data_prop_read_single() (Andy Shevchenko). - Fix two issues in the ACPI SBS driver (Armin Wolf). - Replace ternary operator with min_t() in the generic ACPI thermal zone driver (Jiangshan Yi). - Ensure that ACPI notify handlers are not running after removal and clean up code in acpi_sb_notify() (Rafael Wysocki). - Remove register_backlight_delay module option and code and remove quirks for false-positive backlight control support advertised on desktop boards (Hans de Goede). - Replace irqdomain.h include with struct declarations in ACPI headers and update several pieces of code previously including of.h implicitly through those headers (Rob Herring). - Fix acpi_evaluate_dsm_typed() redefinition error (Kiran K). - Update the pm_profile sysfs attribute documentation (Rafael Wysocki). - Add 80862289 ACPI _HID for second PWM controller on Cherry Trail to the ACPI driver for Intel SoCs (Hans de Goede). -----BEGIN PGP SIGNATURE----- iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmRGvLQSHHJqd0Byand5 c29ja2kubmV0AAoJEILEb/54YlRxoV4P/jxWGAdldtgXORR58lKGbSs6lx/0Y+SF iI7qK88NcbcbWS+a3PqRrisNkjN17rjzajfp28Ue2CXFxzwTViyw6KYELbPJ6N/h /3prem++jKgf7qiueDJG/AyO8N2+Z+yciubhxdMiK1+c1dZM2ycwSyBzJgYocpXn fH+YFPhxE7c8Z8doBrTOZjRuU4SIEKCmxo3c5BbCuyVZkbqCRdQMIDCiBJgLTmbo z4pu9OFhAamB8Cth2QFfRbZWqmuY71Gt54+c4ITPPV2ALlLUYODyHZoSISBJULp3 k0lU/hMCD+i1WRwv+Bb6of7pJPM4Lqp+wOirAtiiibjE9LRxVTNyOUAHLXbx+t2V PN8JKVJVCLaZO6TRELgFIL4nh4aBdOtr4BuaLnClZho9bG68jEkc8grnOZYhFYtM 66BuJBW30rwwGY4N5VSZGzFFR7l2qaHIOSHdq681bxQ3e6erFEeIc5jQVEOKgCqd XWdELVkqf3CnCX0lgonj+AgoeCqOpYdrNcWqMsJ+6OyQRoFhLFltDSPeJm9gHGO7 X+qCQru4ZgEDKexWKpGgH9x8AllDKbh/ApyyumXgsQOsRocVdoNaf+yCBlaaDyqu UYif6hgFYnIxF2Fg1r/POgHDXFobE4iUTHcUU1V2QhuByc4PkN9ljKsHeC2FgVUz JityWRiMABNv =O61K -----END PGP SIGNATURE----- Merge tag 'acpi-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI updates from Rafael Wysocki: "These update the ACPICA code in the kernel to upstream revision 20230331, fix the ACPI SBS driver and the evaluation of the _PDC method on Xen dom0 in the ACPI processor driver, update the ACPI driver for Intel SoCs and clean up code in multiple places. Specifics: - Update the ACPICA code in the kernel to upstream revision 20230331 including the following changes: * Delete bogus node_array array of pointers from AEST table (Jessica Clarke) * Add support for trace buffer extension in GICC to the ACPI MADT parser (Xiongfeng Wang) * Add missing macro ACPI_FUNCTION_TRACE() for acpi_ns_repair_HID() (Xiongfeng Wang) * Add missing tables to astable (Pedro Falcato) * Add support for 64 bit loong_arch compilation to ACPICA (Huacai Chen) * Add support for ASPT table in disassembler to ACPICA (Jeremi Piotrowski) * Add support for Arm's MPAM ACPI table version 2 (Hesham Almatary) * Update all copyrights/signons in ACPICA to 2023 (Bob Moore) * Add support for ClockInput resource (v6.5) (Niyas Sait) * Add RISC-V INTC interrupt controller definition to the list of supported interrupt controllers for MADT (Sunil V L) * Add structure definitions for the RISC-V RHCT ACPI table (Sunil V L) * Address several cases in which the ACPICA code might lead to undefined behavior (Tamir Duberstein) * Make ACPICA code support flexible arrays properly (Kees Cook) * Check null return of ACPI_ALLOCATE_ZEROED in acpi_db_display_objects() (void0red) * Add os specific support for Zephyr RTOS to ACPICA (Najumon) * Update version to 20230331 (Bob Moore) - Fix evaluating the _PDC ACPI control method when running as Xen dom0 (Roger Pau Monne) - Use platform devices to load ACPI PPC and PCC drivers (Petr Pavlu) - Check for null return of devm_kzalloc() in fch_misc_setup() (Kang Chen) - Log a message if enable_irq_wake() fails for the ACPI SCI (Simon Gaiser) - Initialize the correct IOMMU fwspec while parsing ACPI VIOT (Jean-Philippe Brucker) - Amend indentation and prefix error messages with FW_BUG in the ACPI SPCR parsing code (Andy Shevchenko) - Enable ACPI sysfs support for CCEL records (Kuppuswamy Sathyanarayanan) - Make the APEI error injection code warn on invalid arguments when explicitly indicated by platform (Shuai Xue) - Add CXL error types to the error injection code in APEI (Tony Luck) - Refactor acpi_data_prop_read_single() (Andy Shevchenko) - Fix two issues in the ACPI SBS driver (Armin Wolf) - Replace ternary operator with min_t() in the generic ACPI thermal zone driver (Jiangshan Yi) - Ensure that ACPI notify handlers are not running after removal and clean up code in acpi_sb_notify() (Rafael Wysocki) - Remove register_backlight_delay module option and code and remove quirks for false-positive backlight control support advertised on desktop boards (Hans de Goede) - Replace irqdomain.h include with struct declarations in ACPI headers and update several pieces of code previously including of.h implicitly through those headers (Rob Herring) - Fix acpi_evaluate_dsm_typed() redefinition error (Kiran K) - Update the pm_profile sysfs attribute documentation (Rafael Wysocki) - Add 80862289 ACPI _HID for second PWM controller on Cherry Trail to the ACPI driver for Intel SoCs (Hans de Goede)" * tag 'acpi-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (64 commits) ACPI: LPSS: Add 80862289 ACPI _HID for second PWM controller on Cherry Trail ACPI: bus: Ensure that notify handlers are not running after removal ACPI: bus: Add missing braces to acpi_sb_notify() ACPI: video: Remove desktops without backlight DMI quirks ACPI: video: Remove register_backlight_delay module option and code ACPI: Replace irqdomain.h include with struct declarations fpga: lattice-sysconfig-spi: Add explicit include for of.h tpm: atmel: Add explicit include for of.h virtio-mmio: Add explicit include for of.h pata: ixp4xx: Add explicit include for of.h ata: pata_macio: Add explicit include of irqdomain.h serial: 8250_tegra: Add explicit include for of.h net: rfkill-gpio: Add explicit include for of.h staging: iio: resolver: ad2s1210: Add explicit include for of.h iio: adc: ad7292: Add explicit include for of.h ACPICA: Update version to 20230331 ACPICA: add os specific support for Zephyr RTOS ACPICA: ACPICA: check null return of ACPI_ALLOCATE_ZEROED in acpi_db_display_objects ACPICA: acpi_resource_irq: Replace 1-element arrays with flexible array ACPICA: acpi_madt_oem_data: Fix flexible array member definition ... |
||
![]() |
53b5e72b9d |
asm-generic updates for 6.4
These are various cleanups, fixing a number of uapi header files to no longer reference CONFIG_* symbols, and one patch that introduces the new CONFIG_HAS_IOPORT symbol for architectures that provide working inb()/outb() macros, as a preparation for adding driver dependencies on those in the following release. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmRG8IkACgkQYKtH/8kJ Uid15Q/9E/neIIEqEk6IvtyhUicrJiIZUM0rGoYtWXiz75ggk6Kx9+3I+j8zIQ/E kf2TzAG7q9Md7nfTDFLr4FSr0IcNDj+VG4nYxUyDHdKGcARO+g9Kpdvscxip3lgU Rw5w74Gyd30u4iUKGS39OYuxcCgl9LaFjMA9Gh402Oiaoh+OYLmgQS9h/goUD5KN Nd+AoFvkdbnHl0/SpxthLRyL5rFEATBmAY7apYViPyMvfjS3gfDJwXJR9jkKgi6X Qs4t8Op8BA3h84dCuo6VcFqgAJs2Wiq3nyTSUnkF8NxJ2RFTpeiVgfsLOzXHeDgz SKDB4Lp14o3mlyZyj00MWq1uMJRRetUgNiVb6iHOoKQ/E4demBdh+mhIFRybjM5B XNTWFcg9PWFCMa4W9jnLfZBc881X4+7T+qUF8I0W/1AbRJUmyGj8HO6jLceC4yGD UYLn5oFPM6OWXHp6DqJrCr9Yw8h6fuviQZFEbl/ARlgVGt+J4KbYweJYk8DzfX6t PZIj8LskOqyIpRuC2oDA1PHxkaJ1/z+N5oRBHq1uicSh4fxY5HW7HnyzgF08+R3k cf+fjAhC3TfGusHkBwQKQJvpxrxZjPuvYXDZ0GxTvNKJRB8eMeiTm1n41E5oTVwQ swSblSCjZj/fMVVPXLcjxEW4SBNWRxa9Lz3tIPXb3RheU10Lfy8= =H3k4 -----END PGP SIGNATURE----- Merge tag 'asm-generic-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic updates from Arnd Bergmann: "These are various cleanups, fixing a number of uapi header files to no longer reference CONFIG_* symbols, and one patch that introduces the new CONFIG_HAS_IOPORT symbol for architectures that provide working inb()/outb() macros, as a preparation for adding driver dependencies on those in the following release" * tag 'asm-generic-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: Kconfig: introduce HAS_IOPORT option and select it as necessary scripts: Update the CONFIG_* ignore list in headers_install.sh pktcdvd: Remove CONFIG_CDROM_PKTCDVD_WCACHE from uapi header Move bp_type_idx to include/linux/hw_breakpoint.h Move ep_take_care_of_epollwakeup() to fs/eventpoll.c Move COMPAT_ATM_ADDPARTY to net/atm/svc.c |
||
![]() |
50749f2dd6 |
tcp/udp: Fix memleaks of sk and zerocopy skbs with TX timestamp.
syzkaller reported [0] memory leaks of an UDP socket and ZEROCOPY skbs. We can reproduce the problem with these sequences: sk = socket(AF_INET, SOCK_DGRAM, 0) sk.setsockopt(SOL_SOCKET, SO_TIMESTAMPING, SOF_TIMESTAMPING_TX_SOFTWARE) sk.setsockopt(SOL_SOCKET, SO_ZEROCOPY, 1) sk.sendto(b'', MSG_ZEROCOPY, ('127.0.0.1', 53)) sk.close() sendmsg() calls msg_zerocopy_alloc(), which allocates a skb, sets skb->cb->ubuf.refcnt to 1, and calls sock_hold(). Here, struct ubuf_info_msgzc indirectly holds a refcnt of the socket. When the skb is sent, __skb_tstamp_tx() clones it and puts the clone into the socket's error queue with the TX timestamp. When the original skb is received locally, skb_copy_ubufs() calls skb_unclone(), and pskb_expand_head() increments skb->cb->ubuf.refcnt. This additional count is decremented while freeing the skb, but struct ubuf_info_msgzc still has a refcnt, so __msg_zerocopy_callback() is not called. The last refcnt is not released unless we retrieve the TX timestamped skb by recvmsg(). Since we clear the error queue in inet_sock_destruct() after the socket's refcnt reaches 0, there is a circular dependency. If we close() the socket holding such skbs, we never call sock_put() and leak the count, sk, and skb. TCP has the same problem, and commit |
||
![]() |
ef36b9afc2 |
fget() to fdget() conversions
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCZEYCQAAKCRBZ7Krx/gZQ 64FdAQDZ2hTDyZEWPt486dWYPYpiKyaGFXSXDGo7wgP0fiwxXQEA/mROKb6JqYw6 27mZ9A7qluT8r3AfTTQ0D+Yse/dr4AM= =GA9W -----END PGP SIGNATURE----- Merge tag 'pull-fd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs fget updates from Al Viro: "fget() to fdget() conversions" * tag 'pull-fd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fuse_dev_ioctl(): switch to fdget() cgroup_get_from_fd(): switch to fdget_raw() bpf: switch to fdget_raw() build_mount_idmapped(): switch to fdget() kill the last remaining user of proc_ns_fget() SVM-SEV: convert the rest of fget() uses to fdget() in there convert sgx_set_attribute() to fdget()/fdput() convert setns(2) to fdget()/fdput() |
||
![]() |
00d0f31a1e |
net: ethtool: coalesce: try to make user settings stick twice
SET_COALESCE may change operation mode and parameters in one call. Changing operation mode may cause the driver to reset the parameter values to what is a reasonable default for new operation mode. Since driver does not know which parameters come from user and which are echoed back from ->get, driver may ignore the parameters when switching operation modes. This used to be inevitable for ioctl() but in netlink we know which parameters are actually specified by the user. We could inform which parameters were set by the user but this would lead to a lot of code duplication in the drivers. Instead try to call the drivers twice if both mode and params are changed. The set method already checks if any params need updating so in case the driver did the right thing the first time around - there will be no second call to it's ->set method (only an extra call to ->get()). For mlx5 for example before this patch we'd see: # ethtool -C eth0 adaptive-rx on adaptive-tx on # ethtool -C eth0 adaptive-rx off adaptive-tx off \ tx-usecs 123 rx-usecs 123 Adaptive RX: off TX: off rx-usecs: 3 rx-frames: 32 tx-usecs: 16 tx-frames: 32 [...] After the change: # ethtool -C eth0 adaptive-rx on adaptive-tx on # ethtool -C eth0 adaptive-rx off adaptive-tx off \ tx-usecs 123 rx-usecs 123 Adaptive RX: off TX: off rx-usecs: 123 rx-frames: 32 tx-usecs: 123 tx-frames: 32 [...] This only works for netlink, so it's a small discrepancy between netlink and ioctl(). Since we anticipate most users to move to netlink I believe it's worth making their lives easier. Link: https://lore.kernel.org/r/20230420233302.944382-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
![]() |
d913d32cc2 |
netlink: Use copy_to_user() for optval in netlink_getsockopt().
Brad Spencer provided a detailed report [0] that when calling getsockopt() for AF_NETLINK, some SOL_NETLINK options set only 1 byte even though such options require at least sizeof(int) as length. The options return a flag value that fits into 1 byte, but such behaviour confuses users who do not initialise the variable before calling getsockopt() and do not strictly check the returned value as char. Currently, netlink_getsockopt() uses put_user() to copy data to optlen and optval, but put_user() casts the data based on the pointer, char *optval. As a result, only 1 byte is set to optval. To avoid this behaviour, we need to use copy_to_user() or cast optval for put_user(). Note that this changes the behaviour on big-endian systems, but we document that the size of optval is int in the man page. $ man 7 netlink ... Socket options To set or get a netlink socket option, call getsockopt(2) to read or setsockopt(2) to write the option with the option level argument set to SOL_NETLINK. Unless otherwise noted, optval is a pointer to an int. Fixes: |
||
![]() |
ffcddcaed6 |
netfilter pull request 23-04-22
-----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEN9lkrMBJgcdVAPub1V2XiooUIOQFAmRDIGwACgkQ1V2XiooU IOTR2xAAgV2g59s0pPO0VnAs9WTKiMgm+9JZz2uLwOT1/nvVzdz8P7wXTJK47m57 qziX//P0S37D6e5UkdSHpGBSfeIAMwciDd5WVJgsZYhpZ/QMS3y4GEUXVybMhV+p oqX86Kc1u91+kLbgFF1CdbMDvw+oNW43QrIYR1Ok2MqlnZ3dlDajkw5KLYWFvb6t 9BCmkqZ1xheuN1l8CPZ0La3a9fwqTuC0P7TgSlO1BZF5nhADajcGt8lF8Td98zEZ Mrb4VyOrhT6UZgGd+UW1ZlNyduO2Cb6Tj7jx9Es5gX8fDjmnZyAJf1qW9Iinoo46 4Yr+61oSNNGdE63m1lLm2ZQQJGDlUsuGCjUMW4hyVe8YIrqQg+cOXaTkCa40Xvos qvObjrsnAd9xHtBchk4IaQ84J56ifalXULAJs8IZGM5K2XUNwnF7kIOaVtV8Rq+K BSSprrM9Z7Lz5W5ucRLlBmDYSDd+ESUnhgJgIuf1CZ04mRBupF4IkqCU5INmVhJR 472cSc9DKPHmsnFFdszidxBwM6mg00qQ9M4Qvl+dQIOs0a28Pr8nHPOSStgMaecd NAPGGEMdRLNaH5KYN1VbseUbbFhXQpXcuNCF1q8fdzpQYyo/+I/lu618sFEhy08r KN6+JIDdrcAdMyYgL3rQy57u58xYlwU2NLIE0SLHLqI4grtTxnw= =T5eS -----END PGP SIGNATURE----- Merge tag 'nf-next-23-04-22' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next Pablo Neira Ayuso says: ==================== Netfilter/IPVS updates for net-next 1) Reduce jumpstack footprint: Stash chain in last rule marker in blob for tracing. Remove last rule and chain from jumpstack. From Florian Westphal. 2) nf_tables validates all tables before committing the new rules. Unfortunately, this has two drawbacks: - Since addition of the transaction mutex pernet state gets written to outside of the locked section from the cleanup callback, this is wrong so do this cleanup directly after table has passed all checks. - Revalidate tables that saw no changes. This can be avoided by keeping the validation state per table, not per netns. From Florian Westphal. 3) Get rid of a few redundant pointers in the traceinfo structure. The three removed pointers are used in the expression evaluation loop, so gcc keeps them in registers. Passing them to the (inlined) helpers thus doesn't increase nft_do_chain text size, while stack is reduced by another 24 bytes on 64bit arches. From Florian Westphal. 4) IPVS cleanups in several ways without implementing any functional changes, aside from removing some debugging output: - Update width of source for ip_vs_sync_conn_options The operation is safe, use an annotation to describe it properly. - Consistently use array_size() in ip_vs_conn_init() It seems better to use helpers consistently. - Remove {Enter,Leave}Function. These seem to be well past their use-by date. - Correct spelling in comments. From Simon Horman. 5) Extended netlink error report for netdevice in flowtables and netdev/chains. Allow for incrementally add/delete devices to netdev basechain. Allow to create netdev chain without device. * tag 'nf-next-23-04-22' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next: netfilter: nf_tables: allow to create netdev chain without device netfilter: nf_tables: support for deleting devices in an existing netdev chain netfilter: nf_tables: support for adding new devices to an existing netdev chain netfilter: nf_tables: rename function to destroy hook list netfilter: nf_tables: do not send complete notification of deletions netfilter: nf_tables: extended netlink error reporting for netdevice ipvs: Correct spelling in comments ipvs: Remove {Enter,Leave}Function ipvs: Consistently use array_size() in ip_vs_conn_init() ipvs: Update width of source for ip_vs_sync_conn_options netfilter: nf_tables: do not store rule in traceinfo structure netfilter: nf_tables: do not store verdict in traceinfo structure netfilter: nf_tables: do not store pktinfo in traceinfo structure netfilter: nf_tables: remove unneeded conditional netfilter: nf_tables: make validation state per table netfilter: nf_tables: don't write table validation state without mutex netfilter: nf_tables: don't store chain address on jump netfilter: nf_tables: don't store address of last rule on jump netfilter: nf_tables: merge nft_rules_old structure and end of ruleblob marker ==================== Link: https://lore.kernel.org/r/20230421235021.216950-1-pablo@netfilter.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
![]() |
5dfb75e842 |
RCU Changes for 6.4:
o MAINTAINERS files additions and changes. o Fix hotplug warning in nohz code. o Tick dependency changes by Zqiang. o Lazy-RCU shrinker fixes by Zqiang. o rcu-tasks stall reporting improvements by Neeraj. o Initial changes for renaming of k[v]free_rcu() to its new k[v]free_rcu_mightsleep() name for robustness. o Documentation Updates: o Significant changes to srcu_struct size. o Deadlock detection for srcu_read_lock() vs synchronize_srcu() from Boqun. o rcutorture and rcu-related tool, which are targeted for v6.4 from Boqun's tree. o Other misc changes. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEcoCIrlGe4gjE06JJqA4nf2o45hAFAmQuBnIACgkQqA4nf2o4 5hACVRAAoXu7/gfh5Pjw9O4E4pCdPJKsZZVYrcrVGrq6NAxRn6M1SgurAdC5grj2 96x0waoGaiO82V0H5iJMcKdAVu67x9R8WaQ1JoxN75Efn8h9W4TguB87TV1gk0xS eZ18b/CyEaM5mNb80DFFF4FLohy5737p/kNTMqXQdUyR1BsDl16iRMgjiBiFhNUx yPo8Y2kC2U2OTbldZgaE7s9bQO3xxEcifx93sGWsAex/gx54FYNisiwSlCOSgOE+ XkYo/OKk8Xvr82tLVX8XQVEPCMJ+rxea8T5zSs8/alvsPq7gA8wW3y6fsoa3vUU/ +Gd+W+Q/OsONIDtp8rQAY1qsD0ScDpaR8052RSH0zTa7pj8HsQgE5PjZ+cJW0SEi cKN+Oe8+ETqKald+xZ6PDf58O212VLrru3RpQWrOQcJ7fmKmfT4REK0RcbLgg4qT CBgOo6eg+ub4pxq2y11LZJBNTv1/S7xAEzFE0kArew64KB2gyVud0VJRZVAJnEfe 93QQVDFrwK2bhgWQZ6J6IbTvGeQW0L93IibuaU6jhZPR283VtUIIvM7vrOylN7Fq 4jsae0T7YGYfKUhgTpm7rCnm8A/D3Ni8MY0sKYYgDSyKmZUsnpI5wpx1xke4lwwV ErrY46RCFa+k8wscc6iWfB4cGXyyFHyu+wtyg0KpFn5JAzcfz4A= =Rgbj -----END PGP SIGNATURE----- Merge tag 'rcu.6.4.april5.2023.3' of git://git.kernel.org/pub/scm/linux/kernel/git/jfern/linux Pull RCU updates from Joel Fernandes: - Updates and additions to MAINTAINERS files, with Boqun being added to the RCU entry and Zqiang being added as an RCU reviewer. I have also transitioned from reviewer to maintainer; however, Paul will be taking over sending RCU pull-requests for the next merge window. - Resolution of hotplug warning in nohz code, achieved by fixing cpu_is_hotpluggable() through interaction with the nohz subsystem. Tick dependency modifications by Zqiang, focusing on fixing usage of the TICK_DEP_BIT_RCU_EXP bitmask. - Avoid needless calls to the rcu-lazy shrinker for CONFIG_RCU_LAZY=n kernels, fixed by Zqiang. - Improvements to rcu-tasks stall reporting by Neeraj. - Initial renaming of k[v]free_rcu() to k[v]free_rcu_mightsleep() for increased robustness, affecting several components like mac802154, drbd, vmw_vmci, tracing, and more. A report by Eric Dumazet showed that the API could be unknowingly used in an atomic context, so we'd rather make sure they know what they're asking for by being explicit: https://lore.kernel.org/all/20221202052847.2623997-1-edumazet@google.com/ - Documentation updates, including corrections to spelling, clarifications in comments, and improvements to the srcu_size_state comments. - Better srcu_struct cache locality for readers, by adjusting the size of srcu_struct in support of SRCU usage by Christoph Hellwig. - Teach lockdep to detect deadlocks between srcu_read_lock() vs synchronize_srcu() contributed by Boqun. Previously lockdep could not detect such deadlocks, now it can. - Integration of rcutorture and rcu-related tools, targeted for v6.4 from Boqun's tree, featuring new SRCU deadlock scenarios, test_nmis module parameter, and more - Miscellaneous changes, various code cleanups and comment improvements * tag 'rcu.6.4.april5.2023.3' of git://git.kernel.org/pub/scm/linux/kernel/git/jfern/linux: (71 commits) checkpatch: Error out if deprecated RCU API used mac802154: Rename kfree_rcu() to kvfree_rcu_mightsleep() rcuscale: Rename kfree_rcu() to kfree_rcu_mightsleep() ext4/super: Rename kfree_rcu() to kfree_rcu_mightsleep() net/mlx5: Rename kfree_rcu() to kfree_rcu_mightsleep() net/sysctl: Rename kvfree_rcu() to kvfree_rcu_mightsleep() lib/test_vmalloc.c: Rename kvfree_rcu() to kvfree_rcu_mightsleep() tracing: Rename kvfree_rcu() to kvfree_rcu_mightsleep() misc: vmw_vmci: Rename kvfree_rcu() to kvfree_rcu_mightsleep() drbd: Rename kvfree_rcu() to kvfree_rcu_mightsleep() rcu: Protect rcu_print_task_exp_stall() ->exp_tasks access rcu: Avoid stack overflow due to __rcu_irq_enter_check_tick() being kprobe-ed rcu-tasks: Report stalls during synchronize_srcu() in rcu_tasks_postscan() rcu: Permit start_poll_synchronize_rcu_expedited() to be invoked early rcu: Remove never-set needwake assignment from rcu_report_qs_rdp() rcu: Register rcu-lazy shrinker only for CONFIG_RCU_LAZY=y kernels rcu: Fix missing TICK_DEP_MASK_RCU_EXP dependency check rcu: Fix set/clear TICK_DEP_BIT_RCU_EXP bitmask race rcu/trace: use strscpy() to instead of strncpy() tick/nohz: Fix cpu_is_hotpluggable() by checking with nohz subsystem ... |