This commit adds support for the Guitar Hero Live PS4 dongles.
These dongles require a "magic" USB control message to be sent
every 8 seconds otherwise the dongle will not report events where
the strumbar is hit while a fret is being held.
Note that the GHL_GUITAR_POKE_INTERVAL is reduced to 8 seconds in order
to support PS3, Wii U, and PS4 GHL dongles.
Also note that the constant for vendor id 0x1430 has been renamed from
Activision to RedOctane as self-declared by the device.
Co-developed-by: Pascal Giard <pascal.giard@etsmtl.ca>
Signed-off-by: Pascal Giard <pascal.giard@etsmtl.ca>
Signed-off-by: Daniel Nguyen <daniel.nguyen.1@ens.etsmtl.ca>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Commit c49c336378 ("HID: support for initialization of some Thrustmaster
wheels") messed up the Makefile and quirks during the refactoring of this
commit.
Luckily, ./scripts/checkkconfigsymbols.py warns on non-existing configs:
HID_TMINIT
Referencing files: drivers/hid/Makefile, drivers/hid/hid-quirks.c
Following the discussion (see Link), CONFIG_HID_THRUSTMASTER is the
intended config for CONFIG_HID_TMINIT and the file hid-tminit.c was
actually added as hid-thrustmaster.c.
So, clean up Makefile and adapt quirks to that refactoring.
Fixes: c49c336378 ("HID: support for initialization of some Thrustmaster wheels")
Link: https://lore.kernel.org/linux-input/CAKXUXMx6dByO03f3dX0X5zjvQp0j2AhJBg0vQFDmhZUhtKxRxw@mail.gmail.com/
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
A quirk was recently added for Elan devices that has same device match
as an entry earlier in the list. The i2c_hid_lookup_quirk function will
always return the last match in the list, so the new entry shadows the
old entry. The quirk in the previous entry, I2C_HID_QUIRK_BOGUS_IRQ,
silenced a flood of messages which have reappeared in the 5.13 kernel.
This change moves the two quirk flags into the same entry.
Fixes: ca66a6770b (HID: i2c-hid: Skip ELAN power-on command after reset)
Signed-off-by: Jim Broadus <jbroadus@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Prevent the ASUS Claymore keyboard from sending a suspend event
when the device sleeps itself. The suspend event causes a system
suspend if uncaught.
Signed off by: Luke D Jones <luke@ljones.dev>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add dynamic debug for debugging sensors states during
initialization, stop, suspend and resume.
Reviewed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add support for power management routines.
Reviewed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Earlier platforms don’t have sensor status checking mechanism.
Sensors are always enabled without checking sensor status.
Hence invoke hid probe only after the sensor is enabled by
checking sensor status.
Reviewed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Sometimes sensor enable/disable may take time, without checking the
actual status bits from MP2 FW can lead the amd-sfh to misbehave.
Hence add a status check of enable/disable command
by waiting on the command response before sending the next
command to FW.
Reviewed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Existing amd-sfh driver is programming the MP2 firmware period field in
units of jiffies, but the MP2 firmware expects in milliseconds unit.
Changing it to milliseconds.
Fixes: 4b2c53d93a ("SFH:Transport Driver to add support of AMD Sensor Fusion Hub (SFH)")
Reviewed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
For devices that only support the BATTERY_VOLTAGE (0x1001) feature, UPower
requires the additional information provided by this patch, to set them up.
Signed-off-by: Hamza Mahfooz <someguy@effective-light.com>
Reviewed-by: Filipe Laíns <lains@riseup.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
thrustmaster_interrupts() does not free memory for send_buf when
usb_interrupt_msg() fails. This is fixed by the given patch.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
thrustmaster_remove() does not release memory for
tm_wheel->change_request. This is fixed by the patch.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
When thrustmaster_probe() handles errors of usb_submit_urb() it does not
free allocated resources and fails. The patch fixes that.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Use usb_get_dev() to increment the reference count of the usb device
structure in order to avoid releasing the structure while it is still in
use. And use usb_put_dev() to decrement the reference count and thus,
when it will be equal to 0 the structure will be released.
Signed-off-by: Salah Triki <salah.triki@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This function logs a warning if the workqueue gets too big.
In order to save a few cycles, use 'atomic_inc_return()' instead of an
'atomic_inc()/atomic_read()' sequence.
This axes a line of code and saves a 'atomic_read()' call.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This commit fixes a functional regression introduced by the commit 82f09a637d
("HID: ft260: improve error handling of ft260_hid_feature_report_get()")
when upon USB disconnect, the FTDI FT260 i2c device is still available within
the /dev folder.
In my company's product, where the host USB to FT260 USB connection is
hard-wired in the PCB, the issue is not reproducible. To reproduce it, I used
the VirtualBox Ubuntu 20.04 VM and the UMFT260EV1A development module for the
FTDI FT260 chip:
Plug the UMFT260EV1A module into a USB port and attach it to VM.
The VM shows 2 i2c devices under the /dev:
michael@michael-VirtualBox:~$ ls /dev/i2c-*
/dev/i2c-0 /dev/i2c-1
The i2c-0 is not related to the FTDI FT260:
michael@michael-VirtualBox:~$ cat /sys/bus/i2c/devices/i2c-0/name
SMBus PIIX4 adapter at 4100
The i2c-1 is created by hid-ft260.ko:
michael@michael-VirtualBox:~$ cat /sys/bus/i2c/devices/i2c-1/name
FT260 usb-i2c bridge on hidraw1
Now, detach the FTDI FT260 USB device from VM. We expect the /dev/i2c-1
to disappear, but it's still here:
michael@michael-VirtualBox:~$ ls /dev/i2c-*
/dev/i2c-0 /dev/i2c-1
And the kernel log shows:
[ +0.001202] usb 2-2: USB disconnect, device number 3
[ +0.000109] ft260 0003:0403:6030.0002: failed to retrieve system status
[ +0.000316] ft260 0003:0403:6030.0003: failed to retrieve system status
It happens because the commit 82f09a637d changed the ft260_get_system_config()
return logic. This caused the ft260_is_interface_enabled() to exit with error
upon the FT260 device USB disconnect, which in turn, aborted the ft260_remove()
before deleting the FT260 i2c device and cleaning its sysfs stuff.
This commit restores the FT260 USB removal functionality and improves the
ft260_is_interface_enabled() code to handle correctly all chip modes defined
by the device interface configuration pins DCNF0 and DCNF1.
Signed-off-by: Michael Zaidman <michael.zaidman@gmail.com>
Acked-by: Aaron Jones (FTDI-UK) <aaron.jones@ftdichip.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
When an EV_KEY event is generated by hid-apple due to special key
mapping, the usual associated scan code event (EV_MSC) is missing.
This issue can be seen with the evtest utility.
Add the scan code event for these special keys.
BugLink: https://bugs.debian.org/757356
Co-developed-by: Daniel Lin <ephemient@gmail.com>
Signed-off-by: Daniel Lin <ephemient@gmail.com>
Signed-off-by: Vincent Lefevre <vincent@vinc17.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
These chips report mute button events in bit 4 of their report without it
being part of the report descriptor.
Use a custom descriptor that maps this bit.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
In commit 18eeef46d3 ("HID: i2c-hid: goodix: Tie the reset line to
true state of the regulator") I added a call to
regulator_register_notifier() but no call to unregister. That's a
bug. Let's use the devm variant to handle the unregistering.
Fixes: 18eeef46d3 ("HID: i2c-hid: goodix: Tie the reset line to true state of the regulator")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
We perform this same set of tests to see if touch input is muted in
several places. We might as well replace these independent copies with
an inline function.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Empty sync events clutter up logs and are a waste of CPU cycles. We can
avoid sending mt_sync events if touch is disabled or a specific slot is
unused. We can avoid sending full sync events if no events were generated.
Signed-off-by: Ping Cheng <ping.cheng@wacom.com>
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Avoid doing unnecessary work when touch is disabled by detecting this
condition and returning early. Note that the probe process sends GET
FEATURE requests to discover e.g. HID_DG_CONTACTMAX, so we can't start
ignoring touch reports until probe finishes.
Signed-off-by: Ping Cheng <ping.cheng@wacom.com>
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Wacom touch devices have two types of touch switches: softkey touch
toggle and hardware touch switch. For softkey toggle, we assume
touch is on by default in the driver. However the hardware touch
switch is controlled by end users. We don't know if it's on or off
before getting the status event.
This patch sets touch off for devices with a hardware switch until we
get the status. This is a bit safer for users who leave the switch "off"
and don't want any accidental touches. The tradeoff is a slight delay
between device connection and touch becoming enabled for users who
leave the switch "on".
Signed-off-by: Ping Cheng <ping.cheng@wacom.com>
Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com>
Tested-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The `input_mt_get_slot_by_key` function may return a negative value
if an error occurs (e.g. running out of slots). If this occurs we
should really avoid reporting any data for the slot.
Signed-off-by: Ping Cheng <ping.cheng@wacom.com>
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Commit 670e90924b ("HID: wacom: support named keys on older devices")
added support for sending named events from the soft buttons on the
24HDT and 27QHDT. In the process, however, it inadvertantly disabled the
touchscreen of the 24HDT and 27QHDT by default. The
`wacom_set_shared_values` function would normally enable touch by default
but because it checks the state of the non-shared `has_mute_touch_switch`
flag and `wacom_setup_touch_input_capabilities` sets the state of the
/shared/ version, touch ends up being disabled by default.
This patch sets the non-shared flag, letting `wacom_set_shared_values`
take care of copying the value over to the shared version and setting
the default touch state to "on".
Fixes: 670e90924b ("HID: wacom: support named keys on older devices")
CC: stable@vger.kernel.org # 5.4+
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Ping Cheng <ping.cheng@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
There is a spelling mistake in the Kconfig text. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The Keychron K1 wireless keyboard has a set of Apple-like function keys
and an Fn key that works like on an Apple bluetooth keyboard. It
identifies as an Apple Alu RevB ANSI keyboard (05ac:024f) over USB and
BT. Use hid-apple for it so the Fn key and function keys work correctly.
Signed-off-by: Haochen Tong <i@hexchain.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
There is a missing space in "relyingon".
Add it.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Fixes: 6a82582d9f ("HID: ft260: add usb hid to i2c host bridge driver")
Fix warning reported by static analysis when built with W=1 for arm64 by
clang version 13.0.0
>> drivers/hid/hid-ft260.c:794:44: warning: format specifies type 'short' but
the argument has type 'int' [-Wformat]
return scnprintf(buf, PAGE_SIZE, "%hi\n", le16_to_cpu(*field));
~~~ ^~~~~~~~~~~~~~~~~~~
%i
include/linux/byteorder/generic.h:91:21: note: expanded from
macro 'le16_to_cpu'
#define le16_to_cpu __le16_to_cpu
^
include/uapi/linux/byteorder/big_endian.h:36:26: note: expanded from
macro '__le16_to_cpu'
#define __le16_to_cpu(x) __swab16((__force __u16)(__le16)(x))
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
include/uapi/linux/swab.h:105:2: note: expanded from macro '__swab16'
(__builtin_constant_p((__u16)(x)) ? \
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Any sprintf style use of %h or %hi for a sub-int sized value isn't useful
since integer promotion is done on the value anyway. So, use %d instead.
https://lore.kernel.org/lkml/CAHk-=wgoxnmsj8GEVFJSvTwdnWm8wVJthefNk2n6+4TC=20e0Q@mail.gmail.com/
Signed-off-by: Michael Zaidman <michael.zaidman@gmail.com>
Suggested-by: Joe Perches <joe@perches.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The driver core ignores the return value of this callback because there
is only little it can do when a device disappears.
This is the final bit of a long lasting cleanup quest where several
buses were converted to also return void from their remove callback.
Additionally some resource leaks were fixed that were caused by drivers
returning an error code in the expectation that the driver won't go
away.
With struct bus_type::remove returning void it's prevented that newly
implemented buses return an ignored error code and so don't anticipate
wrong expectations for driver authors.
Reviewed-by: Tom Rix <trix@redhat.com> (For fpga)
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com> (For drivers/s390 and drivers/vfio)
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> (For ARM, Amba and related parts)
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Chen-Yu Tsai <wens@csie.org> (for sunxi-rsb)
Acked-by: Pali Rohár <pali@kernel.org>
Acked-by: Mauro Carvalho Chehab <mchehab@kernel.org> (for media)
Acked-by: Hans de Goede <hdegoede@redhat.com> (For drivers/platform)
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-By: Vinod Koul <vkoul@kernel.org>
Acked-by: Juergen Gross <jgross@suse.com> (For xen)
Acked-by: Lee Jones <lee.jones@linaro.org> (For mfd)
Acked-by: Johannes Thumshirn <jth@kernel.org> (For mcb)
Acked-by: Johan Hovold <johan@kernel.org>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> (For slimbus)
Acked-by: Kirti Wankhede <kwankhede@nvidia.com> (For vfio)
Acked-by: Maximilian Luz <luzmaximilian@gmail.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> (For ulpi and typec)
Acked-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com> (For ipack)
Acked-by: Geoff Levand <geoff@infradead.org> (For ps3)
Acked-by: Yehezkel Bernat <YehezkelShB@gmail.com> (For thunderbolt)
Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> (For intel_th)
Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> (For pcmcia)
Acked-by: Rafael J. Wysocki <rafael@kernel.org> (For ACPI)
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> (rpmsg and apr)
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> (For intel-ish-hid)
Acked-by: Dan Williams <dan.j.williams@intel.com> (For CXL, DAX, and NVDIMM)
Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com> (For isa)
Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (For firewire)
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> (For hid)
Acked-by: Thorsten Scherer <t.scherer@eckelmann.de> (For siox)
Acked-by: Sven Van Asbroeck <TheSven73@gmail.com> (For anybuss)
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> (For MMC)
Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Finn Thain <fthain@linux-m68k.org>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20210713193522.1770306-6-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The regulator for the touchscreen could be:
* A dedicated regulator just for the touchscreen.
* A regulator shared with something else in the system.
* An always-on regulator.
How we want the "reset" line to behave depends a bit on which of those
three cases we're in. Currently the code is written with the
assumption that it has a dedicated regulator, but that's not really
guaranteed to be the case.
The problem we run into is that if we leave the touchscreen powered on
(because someone else is requesting the regulator or it's an always-on
regulator) and we assert reset then we apparently burn an extra 67 mW
of power. That's not great.
Let's instead tie the control of the reset line to the true state of
the regulator as reported by regulator notifiers. If we have an
always-on regulator our notifier will never be called. If we have a
shared regulator then our notifier will be called when the touchscreen
is truly turned on or truly turned off.
Using notifiers like this nicely handles all the cases without
resorting to hacks like pretending that there is no "reset" GPIO if we
have an always-on regulator.
NOTE: if the regulator is on a shared line it's still possible that
things could be a little off. Specifically, this case is not handled
even after this patch:
1. Suspend goodix (send "sleep", goodix stops requesting regulator on)
2. Other regulator user turns off (regulator fully turns off).
3. Goodix driver gets notified and asserts reset.
4. Other regulator user turns on.
5. Goodix driver gets notified and deasserts reset.
6. Nobody resumes goodix.
With that set of steps we'll have reset deasserted but we will have
lost the results of the I2C_HID_PWR_SLEEP from the suspend path. That
means we might be in higher power than we could be even if the goodix
driver thinks things are suspended. Presumably, however, we're still
in better shape than if we were asserting "reset" the whole time. If
somehow the above situation is actually affecting someone and we want
to do better we can deal with it when we have a real use case.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
amd_stop_sensor_v2 accidentally used a different MMIO register than
amd_start_sensor_v2 for the DMA address.
Fixes: f264481ad6 ("HID: amd_sfh: Extend driver capabilities for multi-generation support")
Signed-off-by: Dylan MacKenzie <ecstaticmorse@gmail.com>
Acked-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
In order to avoid triggering involuntary high-resolution scroll events
due to tiny touch movement deltas, add a movement threshold.
The value chosen for the threshold, about 1.5 ~ 2 mm, is similar to the
threshold used on touchpads by libinput (see libinput
evdev-mt-touchpad-gestures.c) to try to keep the scroll experience
consistent.
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The Magic Mouse, generations 1 and 2, doesn't have a physical scroll
wheel, instead, the REL_WHEEL and REL_HWHEEL events are emulated
when sliding a finger on the surface of the mouse.
However, the smooth movement of the finger is transformed into a step
based scroll on the screen, leading to a suboptimal user experience.
Emulate high-resolution scroll by sending REL_WHEEL_HI_RES and
REL_HWHEEL_HI_RES events so the scroll on the screen is closer to the
finger movement.
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Remove the early return on LED brightness set so that any controller
application, daemon, or desktop may set the same brightness at any stage.
This is required because many ASUS ROG keyboards will default to max
brightness on laptop resume if the LEDs were set to off before sleep.
Signed-off-by: Luke D Jones <luke@ljones.dev>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The power supply states of discharging, charging, full, etc, represent
state of charging, not the capacity level of the battery (for which
we have a separate property). Current HID usage tables to not allow
for expressing charging state of the batteries found in generic
styli, so we should simply assume that the battery is discharging
even if current capacity is at 100% when battery strength reporting
is done via HID interface. In fact, we were doing just that before
commit 581c448476.
This change helps UIs to not mis-represent fully charged batteries in
styli as being charging/topping-off.
Fixes: 581c448476 ("HID: input: map digitizer battery usage")
Reported-by: Kenneth Albanowski <kenalba@google.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
ISH IPC driver uses asynchronous workqueue to do resume now, but there is
a potential timing issue: when child devices resume before bus driver, it
will cause child devices resume failed and cannot be recovered until
reboot. The current implementation in this case do wait for IPC to resume
but fail to accommodate for a case when there is no ISH reboot and soft
resume is taking time. This issue is apparent on Tiger Lake platform with
5.11.13 kernel when doing suspend to idle then resume(s0ix) test. To
resolve this issue, we change ISHTP HID client to use asynchronous resume
callback too. In the asynchronous resume callback, it waits for the ISHTP
resume done event, and then notify ISHTP HID client link ready.
Signed-off-by: Ye Xiang <xiang.ye@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
- patch series that ensures that hid-multitouch driver disables touch and
button-press reporting on hid-mt devices during suspend when the device is
not configured as a wakeup-source, from Hans de Goede
- support for LCD menu keys + LCD brightness control on the Logitech Z-10
speakers (with LCD) which use the same protocol as the G15 keyboards
from Hans de Goede
- device unbinding locking fix from Dmitry Torokhov
- support for programmable buttons (mapping to KEY_MACRO# event codes)
from Thomas Weißschuh
- various other small fixes and code style improvements
Use kmemdup() helper instead of open-coding to
simplify the code when allocate change_request.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Disable event reporting on suspend when the hid device is not
a wakeup-source. This should help save some extra power in this case.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Without a ll-driver callback hid_hw_may_wakeup() will return:
device_may_wakeup(hdev->dev.parent), but for the hid devices
instantiated by logitech-dj for devices behind the receiver the
logitech-dj hid(pp)-device is the parent.
Add a logi_dj_ll_may_wakeup() callback which calls hid_hw_may_wakeup()
on the logitech-dj hid(pp) parent-hid-device.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Without a ll-driver callback hid_hw_may_wakeup() will return:
device_may_wakeup(hdev->dev.parent), usb_hid_driver instantiated hid
devices have their parent set to the usb-interface to which the
usb_hid_driver is bound, but the power/wakeup* sysfs attributes are
part of the usb-device.
Add a may_wakeup ll-driver callback which calls device_may_wakeup()
on the usb-device instead.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Map them to KEY_MACRO# event codes.
These buttons are defined by HID as follows:
"The user defines the function of these buttons to control software applications or GUI objects."
This matches the semantics of the KEY_MACRO# input event codes that Linux supports.
Also add support for HID "Named Array" collections.
Also add hid-debug support for KEY_MACRO#.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The capacitive status of ExpressKeys is reported with usages beginning
at 0x940, not 0x950. Bring our driver into alignment with reality.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add Human Presence Detection (HPD) sensors support
on AMD next generation HPD supported platforms.
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Reviewed-by: Nehal Shah <nehal-bakulchandra.shah@amd.com>
Reviewed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Extend ALS support for AMD next generation SoC's like Renoir, Cezanne.
AMD next generation platforms use C2P message register to read ALS
sensor data instead of DRAM address.
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Reviewed-by: Nehal Shah <nehal-bakulchandra.shah@amd.com>
Reviewed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Initial driver support only covered the first generation of SFH
platforms. In order to support the future generations introduce
ops selection to distinguish the different platforms.
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Reviewed-by: Nehal Shah <nehal-bakulchandra.shah@amd.com>
Reviewed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Getting a report (e.g. feature report) from a device requires us to send
a request indicating which report we want to retrieve and then waiting
for the corresponding response containing that report. We already
provide the response structure to the request call, but the request
isn't marked as a request that expects a response. Thus the request
returns before we receive the response and the response buffer indicates
a zero length response due to that.
This essentially means that the get-report calls are broken and will
always indicate that a report of length zero has been read.
Fix this by appropriately marking the request.
Fixes: b05ff1002a ("HID: Add support for Surface Aggregator Module HID transport")
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This commit fixes a freeze on insertion of a Guitar Hero Live PS3/WiiU
USB dongle. Indeed, with the current implementation, inserting one of
those USB dongles will lead to a hard freeze. I apologize for not
catching this earlier, it didn't occur on my old laptop.
While the issue was isolated to memory alloc/free, I could not figure
out why it causes a freeze. So this patch fixes this issue by
simplifying memory allocation and usage.
We remind that for the dongle to work properly, a control URB needs to
be sent periodically. We used to alloc/free the URB each time this URB
needed to be sent.
With this patch, the memory for the URB is allocated on the probe, reused
for as long as the dongle is plugged in, and freed once the dongle is
unplugged.
Signed-off-by: Pascal Giard <pascal.giard@etsmtl.ca>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
usb_kbd_alloc_mem is called in usb_kbd_probe, which is
not in atomic context. So constraints can be relaxed here.
Use GFP_KERNEL instead of GFP_ATOMIC.
Signed-off-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Different platforms have different DMA capability, on most of
platforms, DMA support cache snooping. But few platforms,
such as ElkhartLake (EHL), don't support cache snooping
which requires cache flush from driver.
So add a hardware level callback to let ishtp driver know if cache
flush is needed.
As most of platform support cache snooping, so driver will not
do cache flush by default, until platform implements this callback
and return true explicitly.
Acked-by: Pandruvada, Srinivas <srinivas.pandruvada@intel.com>
Signed-off-by: Even Xu <even.xu@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
During ISH DMA enabling, some platforms (such as EHL) don't
support cache snooping, driver needs involve clflush_cache_range
API which isn't supported by all archs (such as ARM).
Considering ISH only exists on Intel platforms, add the dependence
in Kconfig to avoid build warnings or errors on other archs.
Acked-by: Pandruvada, Srinivas <srinivas.pandruvada@intel.com>
Signed-off-by: Even Xu <even.xu@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The Elantech touchscreen/digitizer in the Surface Go mistakenly reports
having a battery. This results in a low battery message every time you
try to use the pen.
This patch adds a quirk to ignore the non-existent battery and
gets rid of the false low battery messages.
Signed-off-by: Zoltan Tamas Vajda <zoltan.tamas.vajda@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
There is no need to use a quirk and then return -ENODEV from the
asus_probe() function to avoid that hid-asus binds to the hiddev
for the USB-interface for the hid-multitouch touchpad.
The hid-multitouch hiddev has a group of HID_GROUP_MULTITOUCH_WIN_8,
so the same result can be achieved by making the hid_device_id entry
for the dock in the asus_devices[] table only match on HID_GROUP_GENERIC
instead of having it match HID_GROUP_ANY.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Commit 9d7b186689 ("HID: magicmouse: add support for Apple Magic
Trackpad 2") added a sanity check for an Apple trackpad but returned
success instead of -ENODEV when the check failed. This means that the
remove callback will dereference the never-initialised driver data
pointer when the driver is later unbound (e.g. on USB disconnect).
Reported-by: syzbot+ee6f6e2e68886ca256a8@syzkaller.appspotmail.com
Fixes: 9d7b186689 ("HID: magicmouse: add support for Apple Magic Trackpad 2")
Cc: stable@vger.kernel.org # 4.20
Cc: Claudio Mettler <claudio@ponyfleisch.ch>
Cc: Marek Wyborski <marek.wyborski@emwesoft.com>
Cc: Sean O'Brien <seobrien@chromium.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
clang doesn't like printing a 32-bit integer using %hX format string:
drivers/hid/i2c-hid/i2c-hid-core.c:994:18: error: format specifies type 'unsigned short' but the argument has type '__u32' (aka 'unsigned int') [-Werror,-Wformat]
client->name, hid->vendor, hid->product);
^~~~~~~~~~~
drivers/hid/i2c-hid/i2c-hid-core.c:994:31: error: format specifies type 'unsigned short' but the argument has type '__u32' (aka 'unsigned int') [-Werror,-Wformat]
client->name, hid->vendor, hid->product);
^~~~~~~~~~~~
Use an explicit cast to truncate it to the low 16 bits instead.
Fixes: 9ee3e06610 ("HID: i2c-hid: override HID descriptors for certain devices")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Replace kzalloc with devm_kzalloc in driver initialization sequence. The
allocation can be tied to the lifetime of the amd_sfh driver. This cleans
up an exit & error paths, since the objects does not need to be
explicitly freed anymore.
Fixes: 4b2c53d93a ("SFH:Transport Driver to add support of AMD Sensor Fusion Hub (SFH)")
Reviewed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The ft260_hid_feature_report_get() checks if the return size matches the
requested size. But the function can also fail with at least -ENOMEM. Add the
< 0 checks.
In ft260_hid_feature_report_get(), do not do the memcpy to the caller's buffer
if there is an error.
Fixes: 6a82582d9f ("HID: ft260: add usb hid to i2c host bridge driver")
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Michael Zaidman <michael.zaidman@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
When the Apple Magic Trackpad 2 is connected over USB it registers four
hid_device report descriptors, however, the driver only handles the one
with type HID_TYPE_USBMOUSE and ignores the other three, thus, no driver
data is attached to them.
When the device is disconnected, the remove callback is called for the
four hid_device report descriptors, crashing when the driver data is
NULL.
Check that the driver data is not NULL before using it in the remove
callback.
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Bixuan Cui <cuibixuan@huawei.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.
Fixes: 224ee88fe3 ("Input: add force feedback driver for PID devices")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Static analysis reports this representative problem
hid-logitech-hidpp.c:1356:23: warning: Assigned value is
garbage or undefined
hidpp->battery.level = level;
^ ~~~~~
In some cases, 'level' is never set in hidpp20_battery_map_status_voltage()
Since level is not available on all hw, initialize level to unknown.
Fixes: be281368f2 ("hid-logitech-hidpp: read battery voltage from newer devices")
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Filipe Laíns <lains@riseup.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The Asus T101HA has a problem with spurious wakeups when the lid is
closed, this is caused by the screen sitting so close to the touchpad
that the touchpad ends up reporting touch events, causing these wakeups.
Add a quirk which disables event reporting on suspend when set, and
enable this quirk for the Asus T101HA touchpad fixing the spurious
wakeups, while still allowing the device to be woken by pressing a
key on the keyboard (which is part of the same USB device).
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Normally the EXPORT_SYMBOL of a function immediately follows the
declaration of the function and all the other functions in hid-core.c
follow this pattern, drop the extraneous empty line before the
EXPORT_SYMBOL_GPL(hid_check_keys_pressed); line.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
probe in usb don't need to be atomic. So GFP_KERNEL can be used here,
instead of GFP_ATOMIC.
Signed-off-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
When user modifies a custom feature value and sensor_hub_set_feature()
fails, return error.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
For ELAN touchscreen, we found our boot code of IC was not flexible enough
to receive and handle this command.
Once the FW main code of our controller is crashed for some reason,
the controller could not be enumerated successfully to be recognized
by the system host. therefore, it lost touch functionality.
Add quirk for skip send power-on command after reset.
It will impact to ELAN touchscreen and touchpad on HID over I2C projects.
Fixes: 43b7029f47 ("HID: i2c-hid: Send power-on command after reset").
Cc: stable@vger.kernel.org
Signed-off-by: Johnny Chuang <johnny.chuang.emc@gmail.com>
Reviewed-by: Harry Cutts <hcutts@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
In hid_submit_ctrl(), the way of calculating the report length doesn't
take into account that report->size can be zero. When running the
syzkaller reproducer, a report of size 0 causes hid_submit_ctrl) to
calculate transfer_buffer_length as 16384. When this urb is passed to
the usb core layer, KMSAN reports an info leak of 16384 bytes.
To fix this, first modify hid_report_len() to account for the zero
report size case by using DIV_ROUND_UP for the division. Then, call it
from hid_submit_ctrl().
Reported-by: syzbot+7c2bb71996f95a82524c@syzkaller.appspotmail.com
Signed-off-by: Anirudh Rayabharam <mail@anirudhrb.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add BUS_VIRTUAL to hid_connect logging since it's a valid hid bus type and it
should not print <UNKNOWN>
Signed-off-by: Mark Bolhuis <mark@bolhuis.dev>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
These were untouched since 2.3.99-pre3, and the explanatory comment for
HID_DG_TIPPRESSURE is TipPressure in other places
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This re-adds the suffix to Win8 stylus-on-touchscreen devices,
now that they aren't erroneously marked as MT
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This effectively changes collection_is_mt from
contact ID in report->field
to
(device is Win8 => collection is finger) && contact ID in report->field
Some devices erroneously report Pen for fingers, and Win8 stylus-on-touchscreen
devices report contact ID, but mark the accompanying touchscreen device's
collection correctly
Cc: stable@vger.kernel.org
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
USB_VENDOR_ID_CORSAIR is defined twice in the same file with the same
value.
Signed-off-by: Hamza Mahfooz <someguy@effective-light.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The Lenovo optical mouse with vendor id of 0x17ef and product id of
0x600e experiences disconnecting issues every 55 seconds:
[38565.706242] usb 1-1.4: Product: Lenovo Optical Mouse
[38565.728603] input: Lenovo Optical Mouse as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:17EF:600E.029A/input/input665
[38565.755949] hid-generic 0003:17EF:600E.029A: input,hidraw1: USB HID v1.11 Mouse [Lenovo Optical Mouse] on usb-0000:01:00.0-1.4/input0
[38619.360692] usb 1-1.4: USB disconnect, device number 48
[38620.864990] usb 1-1.4: new low-speed USB device number 49 using xhci_hcd
[38620.984011] usb 1-1.4: New USB device found, idVendor=17ef,idProduct=600e, bcdDevice= 1.00
[38620.998117] usb 1-1.4: New USB device strings: Mfr=0, Product=2,SerialNumber=0
This adds HID_QUIRK_ALWAYS_POLL for this device in order to work properly.
Signed-off-by: Saeed Mirzamohammadi <saeed.mirzamohammadi@oracle.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The G713 and G733 both emit an unexpected keycode on some key
presses such as Fn+Pause. The device in this case is emitting
two events on key down, and 3 on key up, the third key up event
is report ID 0x02 and is unfiltered, causing incorrect event.
This patch filters out the single problematic event.
Signed-off-by: Luke D Jones <luke@ljones.dev>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
I noticed that the 2 HID drivers which I've written and maintain were
missing a MODULE_AUTHOR tag, add this so that people can easily figure
out who to email with questions.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add support to hid-lg-g15 for the Logitech Z-10 speakers. This adds
support for the LCD menu keys found on these speakers, as well as
support for controlling the LCD's brightness through a LED classdev.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Make the LED-name used by lg_g15_register_led() a parameter.
This is a preparation patch for adding support for the LCD menu
keys + LCD brightness control on the Logitech Z-10 speakers (with LCD)
which use the same protocol as the G15 keyboards.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Factor the input-device setup + KEY_KBD_LCD_MENU capability setting out
of lg_g15_probe() into a new lg_g15_init_input_dev() helper function.
This is a preparation patch for adding support for the LCD menu
keys + LCD brightness control on the Logitech Z-10 speakers (with LCD)
which use the same protocol as the G15 keyboards.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Factor out the handling of the G15 LCD menu keys out of
lg_g15_event() into a new lg_g15_handle_lcd_menu_keys() helper function.
This is a preparation patch for adding support for the LCD menu
keys on the Logitech Z-10 speakers (with LCD) which use the same
funky HID report format.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The report-size is already checked in lg_g15_raw_event() before calling
the lg_*_event() functions and these functions don't use the passed
in size at all, drop the unused parameter.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
In the function sensor_hub_set_feature(), return error when hid_set_field()
fails.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The SMbus block transaction limits the number of bytes transferred to 32,
but nothing prevents a user from specifying via ioctl a larger data size
than the ft260 can handle in a single transfer.
i2cdev_ioctl_smbus()
--> i2c_smbus_xfer
--> __i2c_smbus_xfer
--> ft260_smbus_xfer
--> ft260_smbus_write
This patch adds data size checking in the ft260_smbus_write().
Fixes: 98189a0adfa0 ("HID: ft260: add usb hid to i2c host bridge driver")
Signed-off-by: Michael Zaidman <michael.zaidman@gmail.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
We want to convert from 16 bit (unsigned) little endian values contained
in a packed struct to CPU native endian values here, not the other way
around. So replace cpu_to_le16() with get_unaligned_le16(), using the
latter instead of le16_to_cpu() to acknowledge that we are reading from
a packed struct.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: b05ff1002a ("HID: Add support for Surface Aggregator Module HID transport")
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
HUTRR101 added a new usage code for a key that is supposed to invoke and
dismiss an emoji picker widget to assist users to locate and enter emojis.
This patch adds a new key definition KEY_EMOJI_PICKER and maps 0x0c/0x0d9
usage code to this new keycode. Additionally hid-debug is adjusted to
recognize this new usage code as well.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This mouse has a horizontal wheel that requires special handling.
Without this patch, the horizontal wheel acts like a vertical wheel.
In the output of `hidrd-convert` for this mouse, there is a
`Usage (B8h)` field. It corresponds to a byte in packets sent by the
device that specifies which wheel generated an input event.
The name "A4TECH" is spelled in all capitals on the company website.
Signed-off-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
By default 27 MHz Logitech keyboards send the keypresses to the receiver
in plain text. Logitech's Windows "Keyboard and Mouse settings" tool allows
configuring encryption for the keyboard wireless link.
Now there also is a Linux tool for setting this up:
https://gitlab.freedesktop.org/jwrdegoede/logitech-27mhz-keyboard-encryption-setup
Once a keyboard is paired in encrypted mode, it will no longer work with
any receiver other then the receiver it was paired with.
If a user accidentally tries to pair another keyboard with the receiver
with which a keyboard has been paired in encrypted mode, then the receiver
looses the encryption key and the originally paired keyboard will no longer
work with either that receiver, or another receiver until the keyboard's
encryption key is rewritten by another encrypted mode pairing using the
tool. Or until it is reset by following a special reset procedure.
This commit adds 3 new log messages related to 27 MHz keyboard link
encryption to the Logitech dj / hidpp drivers:
1. An info level message when keyboard encryption is being used
2. A warning message when keyboard encryption is not used
3. An error message when the encryption key has been lost and the
keyboard will not work because of this
Messages 2. and 3. contain a link to the userspace tool to setup the
encryption. The linked page also contains instructions to clear the key
(without needing the tool) to help a user recover from the keyboard not
working in case 3.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Just like the K12A the Dell K15A keyboard-dock has problems with
get_feature requests. This sometimes leads to several
"failed to fetch feature 8" messages getting logged, after which the
touchpad may or may not work.
Just like the K15A these errors are triggered by undocking and docking
the tablet.
There also seem to be other problems when undocking and then docking again
in quick succession. It seems that in this case the keyboard-controller
still retains some power from capacitors and does not go through a
power-on-reset leaving it in a confuses state, symptoms of this are:
1. The USB-ids changing to 048d:8910
2. Failure to read the HID descriptors on the second (mouse) USB intf.
3. The touchpad freezing after a while
These problems can all be cleared by undocking the keyboard and waiting
a full minute before redocking it. Unfortunately there is nothing we can
do about this in the kernel.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Fix the return value check which testing the wrong variable
in thrustmaster_probe().
Fixes: c49c336378 ("HID: support for initialization of some Thrustmaster wheels")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The Saitek X65 joystick has a pair of axes that were used as mouse
pointer controls by the Windows driver. The corresponding usage page is
the Game Controls page, which is not recognized by the generic HID
driver, and therefore, both axes get mapped to ABS_MISC. The quirk makes
the second axis get mapped to ABS_MISC+1, and therefore made available
separately.
Signed-off-by: Nirenjan Krishnan <nirenjan@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Action of unbinding driver from a device is not cancellable and should not
fail, and driver core does not pay attention to the result of "remove"
method, therefore using down_interruptible() in hid_device_remove() does
not make sense.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Older ROG keyboards emit a similar stream of bytes to the new
N-Key keyboards and require filtering to prevent a lot of
unmapped key warnings showing. As all the ROG keyboards use
QUIRK_USE_KBD_BACKLIGHT this is now used to branch to filtering
in asus_raw_event.
Signed-off-by: Luke D Jones <luke@ljones.dev>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
A number of USB keyboards, using the Semitek firmware, are capable of
handling arbitrary N-key rollover, but due to a buggy report
descriptor, keys beyond the sixth cannot be detected by the generic
HID driver.
There are numerous hardware variants sold by several vendors, mostly
using generic names like "GK61" for the 61-key version. These
keyboards are sometimes known collectively as the "GK6X" series.
The keyboard has three USB interfaces. Interface 0 uses the standard
HID boot protocol, limited to eight modifier keys and six normal keys;
interface 2 uses a custom report format that permits any number of
keys. If more than six keys are pressed simultaneously, the first six
are reported via interface 0 while subsequent keys are reported via
interface 2.
(Interface 1 uses a custom protocol for reprogramming the keyboard;
this can be controlled through userspace tools and is not of concern
for the present driver.)
The report descriptor for interface 2, however, is incorrect (for
report ID 0x04, the input field is marked as "array" rather than
"variable".) The descriptor appears to be correct in other respects,
so we simply replace the incorrect byte before parsing the descriptor.
Signed-off-by: Benjamin Moody <bmoody@member.fsf.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Only set the bits that are supported by the targeted devices.
This patch also removes duplicated set_bit calls.
Signed-off-by: Ping Cheng <ping.cheng@wacom.com>
Reviewed-by: Jason Gerecke <Jason.Gerecke@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Fixes the following W=1 kernel build warning(s):
drivers/hid/hid-sensor-hub.c:54: warning: Function parameter or member 'hsdev' not described in 'hid_sensor_hub_callbacks_list'
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: linux-input@vger.kernel.org
Cc: linux-iio@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Commit b0f847e16c ("HID: hid-sensor-hub: Force logical minimum to 1
for power and report state") removed the last used quirk handled by
this driver.
Fixes the following W=1 kernel build warning(s):
drivers/hid/hid-sensor-hub.c:39: warning: Function parameter or member 'quirks' not described in 'sensor_hub_data'
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: linux-input@vger.kernel.org
Cc: linux-iio@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Fixes the following W=1 kernel build warning(s):
drivers/hid/wacom_sys.c:1505: warning: Function parameter or member 'wacom' not described in 'wacom_led_next'
drivers/hid/wacom_sys.c:1505: warning: Function parameter or member 'cur' not described in 'wacom_led_next'
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: linux-input@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Fixes the following W=1 kernel build warning(s):
drivers/hid/hid-sensor-custom.c: In function ‘store_value’:
drivers/hid/hid-sensor-custom.c:400:7: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable]
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: linux-input@vger.kernel.org
Cc: linux-iio@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Fixes the following W=1 kernel build warning(s):
drivers/hid/hid-uclogic-params.c:33: warning: expecting prototype for Convert a pen in(). Prototype was for uclogic_params_pen_inrange_to_str() instead
drivers/hid/hid-uclogic-params.c:519: warning: wrong kernel-doc identifier on line:
drivers/hid/hid-uclogic-params.c:706: warning: expecting prototype for uclogic_params_init(). Prototype was for uclogic_params_huion_init() instead
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: linux-input@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Fixes the following W=1 kernel build warning(s):
drivers/hid/hid-uclogic-rdesc.c:645: warning: wrong kernel-doc identifier on line:
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: linux-input@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Fixes the following W=1 kernel build warning(s):
drivers/hid/hid-logitech-hidpp.c:275: warning: Function parameter or member 'hidpp' not described in 'hidpp_send_message_sync'
drivers/hid/hid-logitech-hidpp.c:275: warning: Function parameter or member 'message' not described in 'hidpp_send_message_sync'
drivers/hid/hid-logitech-hidpp.c:275: warning: Function parameter or member 'response' not described in 'hidpp_send_message_sync'
drivers/hid/hid-logitech-hidpp.c:275: warning: expecting prototype for and something else(). Prototype was for hidpp_send_message_sync() instead
drivers/hid/hid-logitech-hidpp.c:427: warning: wrong kernel-doc identifier on line:
drivers/hid/hid-logitech-hidpp.c:470: warning: Function parameter or member 'input_dev' not described in 'hidpp_scroll_counter_handle_scroll'
drivers/hid/hid-logitech-hidpp.c:1894: warning: Function parameter or member 'hidpp' not described in 'hidpp_touchpad_fw_items_set'
drivers/hid/hid-logitech-hidpp.c:1894: warning: Function parameter or member 'feature_index' not described in 'hidpp_touchpad_fw_items_set'
drivers/hid/hid-logitech-hidpp.c:1894: warning: Function parameter or member 'items' not described in 'hidpp_touchpad_fw_items_set'
drivers/hid/hid-logitech-hidpp.c:1894: warning: expecting prototype for send a set state command to the device by reading the current items(). Prototype was for hidpp_touchpad_fw_items_set() instead
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: Henrik Rydberg <rydberg@bitmath.org>
Cc: Lopez Casado <nlopezcasad@logitech.com>
Cc: linux-input@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Fixes the following W=1 kernel build warning(s):
drivers/hid/hid-picolcd_core.c: In function ‘picolcd_raw_event’:
drivers/hid/hid-picolcd_core.c:332:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable]
Cc: "Bruno Prémont" <bonbons@linux-vserver.org>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: "L. Vinyard, Jr" <rvinyard@cs.nmsu.edu>
Cc: linux-input@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Fixes the following W=1 kernel build warning(s):
drivers/hid/hid-kye.c:666: warning: expecting prototype for Enable fully(). Prototype was for kye_tablet_enable() instead
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: linux-input@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Fixes the following W=1 kernel build warning(s):
drivers/hid/hid-core.c:2142: warning: expecting prototype for store_new_id(). Prototype was for new_id_store() instead
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: Vojtech Pavlik <vojtech@suse.cz>
Cc: Michael Haboustak <mike-@cinci.rr.com>
Cc: linux-input@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Fixes the following W=1 kernel build warning(s):
drivers/hid/hid-alps.c:113: warning: expecting prototype for struct u1_data. Prototype was for struct alps_dev instead
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: Henrik Rydberg <rydberg@bitmath.org>
Cc: Masaki Ota <masaki.ota@jp.alps.com>
Cc: linux-input@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Fixes the following W=1 kernel build warning(s):
drivers/hid/usbhid/hid-pidff.c:512: warning: Function parameter or member 'dev' not described in 'pidff_playback'
drivers/hid/usbhid/hid-pidff.c:512: warning: Function parameter or member 'effect_id' not described in 'pidff_playback'
drivers/hid/usbhid/hid-pidff.c:512: warning: Function parameter or member 'value' not described in 'pidff_playback'
drivers/hid/usbhid/hid-pidff.c:512: warning: expecting prototype for value times(). Prototype was for pidff_playback() instead
drivers/hid/usbhid/hid-pidff.c:1005: warning: Function parameter or member 'pidff' not described in 'pidff_find_effects'
drivers/hid/usbhid/hid-pidff.c:1005: warning: Function parameter or member 'dev' not described in 'pidff_find_effects'
drivers/hid/usbhid/hid-pidff.c:1005: warning: expecting prototype for Find the implemented effect types(). Prototype was for pidff_find_effects() instead
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: Anssi Hannula <anssi.hannula@gmail.com>
Cc: linux-usb@vger.kernel.org
Cc: linux-input@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Fixes the following W=1 kernel build warning(s):
drivers/hid/usbhid/usbkbd.c:66: warning: bad line: should be on
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: message to <vojtech@ucw.cz>
Cc: linux-usb@vger.kernel.org
Cc: linux-input@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Fixes the following W=1 kernel build warning(s):
drivers/hid/intel-ish-hid/ishtp/bus.c: In function ‘ishtp_trace_callback’:
drivers/hid/intel-ish-hid/ishtp/bus.c:876:29: warning: return type might be a candidate for a format attribute [-Wsuggest-attribute=format]
876 | return cl_device->ishtp_dev->print_log;
| ~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: Daniel Drubin <daniel.drubin@intel.com>
Cc: linux-input@vger.kernel.org
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
And demote non-conformant header
Fixes the following W=1 kernel build warning(s):
drivers/hid/intel-ish-hid/ishtp-fw-loader.c:46: warning: Enum value 'LOADER_CMD_XFER_QUERY' not described in enum 'ish_loader_commands'
drivers/hid/intel-ish-hid/ishtp-fw-loader.c:46: warning: Enum value 'LOADER_CMD_XFER_FRAGMENT' not described in enum 'ish_loader_commands'
drivers/hid/intel-ish-hid/ishtp-fw-loader.c:46: warning: Enum value 'LOADER_CMD_START' not described in enum 'ish_loader_commands'
drivers/hid/intel-ish-hid/ishtp-fw-loader.c:108: warning: Function parameter or member 'reserved' not described in 'loader_msg_hdr'
drivers/hid/intel-ish-hid/ishtp-fw-loader.c:196: warning: Function parameter or member 'data' not described in 'response_info'
drivers/hid/intel-ish-hid/ishtp-fw-loader.c:196: warning: Function parameter or member 'max_size' not described in 'response_info'
drivers/hid/intel-ish-hid/ishtp-fw-loader.c:196: warning: Function parameter or member 'size' not described in 'response_info'
drivers/hid/intel-ish-hid/ishtp-fw-loader.c:196: warning: Function parameter or member 'error' not described in 'response_info'
drivers/hid/intel-ish-hid/ishtp-fw-loader.c:196: warning: Function parameter or member 'received' not described in 'response_info'
drivers/hid/intel-ish-hid/ishtp-fw-loader.c:196: warning: Function parameter or member 'wait_queue' not described in 'response_info'
drivers/hid/intel-ish-hid/ishtp-fw-loader.c:233: warning: Function parameter or member 'loader_ishtp_cl' not described in 'ishtp_cl_data'
drivers/hid/intel-ish-hid/ishtp-fw-loader.c:233: warning: Function parameter or member 'cl_device' not described in 'ishtp_cl_data'
drivers/hid/intel-ish-hid/ishtp-fw-loader.c:233: warning: Function parameter or member 'response' not described in 'ishtp_cl_data'
drivers/hid/intel-ish-hid/ishtp-fw-loader.c:233: warning: Function parameter or member 'flag_retry' not described in 'ishtp_cl_data'
drivers/hid/intel-ish-hid/ishtp-fw-loader.c:233: warning: Function parameter or member 'retry_count' not described in 'ishtp_cl_data'
drivers/hid/intel-ish-hid/ishtp-fw-loader.c:252: warning: Function parameter or member 'client_data' not described in 'get_firmware_variant'
drivers/hid/intel-ish-hid/ishtp-fw-loader.c:252: warning: Function parameter or member 'filename' not described in 'get_firmware_variant'
drivers/hid/intel-ish-hid/ishtp-fw-loader.c:281: warning: Function parameter or member 'out_msg' not described in 'loader_cl_send'
drivers/hid/intel-ish-hid/ishtp-fw-loader.c:281: warning: Function parameter or member 'out_size' not described in 'loader_cl_send'
drivers/hid/intel-ish-hid/ishtp-fw-loader.c:281: warning: Function parameter or member 'in_msg' not described in 'loader_cl_send'
drivers/hid/intel-ish-hid/ishtp-fw-loader.c:281: warning: Function parameter or member 'in_size' not described in 'loader_cl_send'
drivers/hid/intel-ish-hid/ishtp-fw-loader.c:281: warning: expecting prototype for Send message from host to firmware(). Prototype was for loader_cl_send() instead
drivers/hid/intel-ish-hid/ishtp-fw-loader.c:445: warning: Function parameter or member 'cl_device' not described in 'loader_cl_event_cb'
drivers/hid/intel-ish-hid/ishtp-fw-loader.c:445: warning: Excess function parameter 'device' description in 'loader_cl_event_cb'
drivers/hid/intel-ish-hid/ishtp-fw-loader.c:551: warning: expecting prototype for Loads ISH firmware using ishtp interface(). Prototype was for ish_fw_xfer_ishtp() instead
drivers/hid/intel-ish-hid/ishtp-fw-loader.c:745: warning: expecting prototype for Start executing ISH main firmware(). Prototype was for ish_fw_start() instead
drivers/hid/intel-ish-hid/ishtp-fw-loader.c:767: warning: expecting prototype for Loads ISH firmware from host(). Prototype was for load_fw_from_host() instead
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Rushikesh S Kadam <rushikesh.s.kadam@intel.com>
Cc: linux-input@vger.kernel.org
Cc: linux-media@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linaro-mm-sig@lists.linaro.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Fixes the following W=1 kernel build warning(s):
drivers/hid/intel-ish-hid/ishtp-hid-client.c:36: warning: expecting prototype for report_bad_packets(). Prototype was for report_bad_packet() instead
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: Daniel Drubin <daniel.drubin@intel.com>
Cc: linux-input@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Fixes the following W=1 kernel build warning(s):
In file included from drivers/hid/intel-ish-hid/ishtp-hid.c:11:
drivers/hid/intel-ish-hid/ishtp-hid.c:263: warning: expecting prototype for ishtp_hid_probe(). Prototype was for ishtp_hid_remove() instead
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: linux-input@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Fixes the following W=1 kernel build warning(s):
drivers/hid/intel-ish-hid/ishtp/client.c:121: warning: Function parameter or member 'cl_device' not described in 'ishtp_cl_allocate'
drivers/hid/intel-ish-hid/ishtp/client.c:121: warning: Excess function parameter 'dev' description in 'ishtp_cl_allocate'
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: linux-input@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Fixes the following W=1 kernel build warning(s):
drivers/hid/intel-ish-hid/ishtp/bus.c:173: warning: Function parameter or member 'fw_client' not described in 'ishtp_get_fw_client_id'
drivers/hid/intel-ish-hid/ishtp/bus.c:845: warning: Function parameter or member 'device' not described in 'ishtp_device'
drivers/hid/intel-ish-hid/ishtp/bus.c:858: warning: Function parameter or member 'device' not described in 'ishtp_get_pci_device'
drivers/hid/intel-ish-hid/ishtp/bus.c:871: warning: Function parameter or member 'cl_device' not described in 'ishtp_trace_callback'
drivers/hid/intel-ish-hid/ishtp/bus.c:884: warning: Function parameter or member 'dev' not described in 'ish_hw_reset'
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: "Uwe Kleine-König" <uwe@kleine-koenig.org>
Cc: linux-input@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Fixes the following W=1 kernel build warning(s):
drivers/hid/intel-ish-hid/ipc/pci-ish.c: In function ‘ish_resume_handler’:
drivers/hid/intel-ish-hid/ipc/pci-ish.c:264:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable]
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: Zhang Lixu <lixu.zhang@intel.com>
Cc: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: Daniel Drubin <daniel.drubin@intel.com>
Cc: linux-input@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Fixes the following W=1 kernel build warning(s):
In file included from drivers/hid/intel-ish-hid/ishtp-hid.c:11:
drivers/hid/intel-ish-hid/ishtp-hid.h:24:21: warning: ‘hid_ishtp_guid’ defined but not used [-Wunused-const-variable=]
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: Daniel Drubin <daniel.drubin@intel.com>
Cc: linux-input@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Fixes the following W=1 kernel build warning(s):
drivers/hid/intel-ish-hid/ishtp/client.c: In function ‘ishtp_cl_disconnect’:
drivers/hid/intel-ish-hid/ishtp/client.c:266:6: warning: variable ‘err’ set but not used [-Wunused-but-set-variable]
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: linux-input@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Fixes the following W=1 kernel build warning(s):
drivers/hid/hid-thrustmaster.c:23: warning: Incorrect use of kernel-doc format: * These interrupts are used to prevent a nasty crash when initializing the
drivers/hid/hid-thrustmaster.c:26: warning: cannot understand function prototype: 'const u8 setup_0[] = '
drivers/hid/hid-thrustmaster.c:49: warning: cannot understand function prototype: 'struct tm_wheel_info '
drivers/hid/hid-thrustmaster.c:62: warning: wrong kernel-doc identifier on line:
drivers/hid/hid-thrustmaster.c:84: warning: cannot understand function prototype: 'struct __packed tm_wheel_response '
drivers/hid/hid-thrustmaster.c:143: warning: wrong kernel-doc identifier on line:
drivers/hid/hid-thrustmaster.c:202: warning: Function parameter or member 'urb' not described in 'thrustmaster_model_handler'
drivers/hid/hid-thrustmaster.c:202: warning: expecting prototype for Called by the USB subsystem when the wheel responses to our request(). Prototype was for thrustmaster_model_handler() instead
drivers/hid/hid-thrustmaster.c:265: warning: wrong kernel-doc identifier on line:
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Dario Pagani <dario.pagani.146+linuxk@gmail.com>
Cc: Kim Kuparinen <kimi.h.kuparinen@gmail.com>
Cc: linux-input@vger.kernel.org
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
This is the capacity in percentage, relative to design capacity.
Specifically, it is present in Apple Magic Mouse 2.
In contrast, usage 00850064 is also the capacity in percentage, but is
relative to full capacity. It is not mapped here because I don't have
such device.
Signed-off-by: John Chen <johnchen902@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
It is observed that the Magic Mouse 2 would not enter multi-touch mode
unless the mouse is connected before loading the module. It seems to be
a quirk specific to Magic Mouse 2
Retrying after 500ms fixes the problem for me. The delay can't be
reduced much further --- 300ms didn't work for me. Retrying immediately
after receiving an event didn't work either.
Signed-off-by: John Chen <johnchen902@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
It is observed that, with 3 button emulation, when middle button is
clicked, either the left button or right button is clicked as well. It
is caused by hidinput "correctly" acting on the event, oblivious to the
3 button emulation.
As raw_event has taken care of everything, no further processing is
needed. However, the only way to stop at raw_event is to return an error
(negative) value. Therefore, the processing is stopped at event instead.
[jkosina@suse.cz: fix comment style]
Signed-off-by: John Chen <johnchen902@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The Thinkpad X1 Tablet Thin keyboard's HID interface for the media-keys
and other special functions, is quite similar to the Thinkpad 10 ultrabook
keyboard's mouse/media-keys HID interface.
The only difference is that it needs a bit different key mappings.
Add support for the mute-LED and the non-standard media-keys on this
keyboard by re-using the tp10_ultrabook_kbd code combined with a new
lenovo_input_mapping_x1_tab_kbd() function.
Co-authored-by: Alexander Kobel <a-kobel@a-kobel.de>
Tested-by: Alexander Kobel <a-kobel@a-kobel.de>
Signed-off-by: Alexander Kobel <a-kobel@a-kobel.de>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Instead of looking for a hdev with a type of HID_TYPE_USBMOUSE find
the interface for the mute/mic-mute/fn-lock LEDs by checking for the
output-report which is used to set them.
This is a preparation patch for adding support for the LEDs on the
X1 tablet thin keyboard which uses the same output-report, but has
a separate (third) USB interface for the touchpad/mouse functionality.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The mute and mic-mute LEDs should be automatically turned on/off based
on the audio-card's mixer settings.
Add the standardized default-trigger names for this, so that the alsa
code can turn the LEDs on/off as appropriate (on supported audio cards).
This brings the mute/mic-mute LED support inline with the thinkpad_acpi
support for the same LEDs in keyboards directly connected to the
laptop's embedded-controller.
Reviewed-by: Marek Behún <kabel@kernel.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Mapping the mic-mute button to KEY_MICMUTE is technically correct but
KEY_MICMUTE translates to a scancode of 256 (248 + 8) under X,
which does not fit in 8 bits, so it does not work.
Because of this userspace is expecting KEY_F20 instead,
theoretically KEY_MICMUTE should work under Wayland but even
there it does not work, because the desktop-environment is
listening only for KEY_F20 and not for KEY_MICMUTE.
Fixes: bc04b37ea0 ("HID: lenovo: Add ThinkPad 10 Ultrabook Keyboard support")
Reviewed-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The LEDs can only by turned on/off, so max_brightness should be set to 1.
Without this the max_brightness sysfs-attribute will report 255 which is
wrong.
Reviewed-by: Marek Behún <kabel@kernel.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The led_classdev already contains a cached value of the last set
brightness, the brightness_get callback is only meant for LED drivers
which can read back the actual / current brightness from the hardware.
Since lenovo_led_brightness_get() just returns the last set value
it does not add any functionality, so we can just remove it.
Reviewed-by: Marek Behún <kabel@kernel.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The HID lenovo probe function only attaches drvdata to one of the
USB interfaces, but lenovo_event() will get called for all USB interfaces
to which hid-lenovo is bound.
This allows a malicious device to fake being a device handled by
hid-lenovo, which generates events for which lenovo_event() has
special handling (and thus dereferences hid_get_drvdata()) on another
interface triggering a NULL pointer exception.
Add a check for hid_get_drvdata() returning NULL, avoiding this
possible NULL pointer exception.
Fixes: bc04b37ea0 ("HID: lenovo: Add ThinkPad 10 Ultrabook Keyboard support")
Reviewed-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Fix the following issues with lenovo_led_set_tp10ubkbd() error handling:
1. On success hid_hw_raw_request() returns the number of bytes sent.
So we should check for (ret != 3) rather then for (ret != 0).
2. Actually propagate errors to the caller.
3. Since the LEDs are part of an USB keyboard-dock the mute LEDs can go
away at any time. Don't log an error when ret == -ENODEV and set the
LED_HW_PLUGGABLE flag to avoid errors getting logged when the USB gets
disconnected.
Fixes: bc04b37ea0 ("HID: lenovo: Add ThinkPad 10 Ultrabook Keyboard support")
Reviewed-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The lenovo_led_brightness_set function may sleep, so we should have the
the led_class_dev's brightness_set_blocking callback point to it, rather
then the regular brightness_set callback.
When toggled through sysfs this is not a problem, but the brightness_set
callback may be called from atomic context when using LED-triggers.
Fixes: bc04b37ea0 ("HID: lenovo: Add ThinkPad 10 Ultrabook Keyboard support")
Reviewed-by: Marek Behún <kabel@kernel.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The led_classdev already contains a cached value of the last set
brightness, the brightness_get callback is only meant for LED drivers
which can read back the actual / current brightness from the hardware.
Since elan_mute_led_get_brigtness() just returns the last set value
it does not add any functionality, so we can just remove it.
Reviewed-by: Marek Behún <kabel@kernel.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The mute LED should be automatically turned on/off based
on the audio-card's mixer settings.
Add the standardized default-trigger name for this, so that the alsa
code can turn the LED on/off as appropriate (on supported audio cards).
Reviewed-by: Marek Behún <kabel@kernel.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Being integrated into an USB keyboard-dock the mute LED can go away
at any time, leading to the following errors:
[ 918.667671] elan 0003:04F3:0755.0002: Failed to set mute led brightness: -19
[ 918.667737] leds elan:red:mute: Setting an LED's brightness failed (-19)
Fix this by making the following changes:
1. Don't log an error from elan_mute_led_set_brigtness() when
ret == -ENODEV
2. Set the LED_HW_PLUGGABLE flag on the mute LED led_classdev
While at it also make sure that elan_mute_led_set_brigtness() returns
an error (-EIO) when ret != 3 but it is not an error (>= 0).
Reviewed-by: Marek Behún <kabel@kernel.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
drivers/hid/hid-thrustmaster.c:300:27-34: WARNING opportunity for kmemdup
Use kmemdup rather than duplicating its implementation
Generated by: scripts/coccinelle/api/memdup.cocci
Fixes: c49c336378 ("HID: support for initialization of some Thrustmaster wheels")
CC: Dario Pagani <dario.pagani.146@gmail.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: kernel test robot <lkp@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add support for the legacy keyboard (KBD/TC=0x08) HID transport layer of
the Surface System Aggregator Module (SSAM) to the Surface HID driver.
On Surface Laptops 1 and 2, this interface is used to connect the
integrated keyboard.
Note that this subsystem interface essentially provides a limited HID
transport layer. In contrast to the generic HID interface (TC=0x15) used
on newer Surface models, this interface only allows (as far as we know)
for a single device to be connected and is otherwise severely limited in
terms of support for feature- and output-reports. Specifically, only
caps-lock-LED output-reports and a single read-only feature-report are
supported.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add a HID transport driver to support integrated HID devices on newer
Microsoft Surface models (specifically 7th-generation, i.e. Surface
Laptop 3, Surface Book 3, and later).
On those models, the internal keyboard and touchpad (as well as some
other HID devices with currently unknown function) are connected via the
generic HID subsystem (TC=0x15) of the Surface System Aggregator Module
(SSAM). This subsystem provides a generic HID transport layer, support
for which is implemented by this driver.
Co-developed-by: Blaž Hrastnik <blaz@mxxn.io>
Signed-off-by: Blaž Hrastnik <blaz@mxxn.io>
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
HID_THRUSTMASTER now requires USB_HID support. Reflect that dependency
in Kconfig.
Fixes: c49c336378 ("HID: support for initialization of some Thrustmaster wheels")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The individual sensor drivers implemented in the ISH firmware needs
capability to take special actions when there is a change in the system
standby state. The ISH core firmware passes this notification to
individual sensor drivers in response to the OS request via connected
standby bit in the SYSTEM_STATE_STATUS command.
This change sets CONNECTED_STANDBY_STATE_BIT bit to 1 during suspend
callback and clears during resume callback.
Signed-off-by: Ye Xiang <xiang.ye@intel.com>
[srinivas.pandruvada@linux.intel.com: changelog rewrite]
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The "len" variable is uninitialize.
Fixes: 6a82582d9f ("HID: ft260: add usb hid to i2c host bridge driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add support for proper initialization of some Thrustmaster wheels that
appear like a "Thrustmaster FFB Wheel" (044f:b65d) to the host. When the
device is connected a special usb request is sent, this request makes the
wheel disconnect and reappear to the host as the "real wheel".
For example: a T150 will re-appear as 044f:b677 and a T300 as 044f:b66e
[jkosina@suse.cz: renamed driver to hid-thrustmaster]
Link: https://github.com/scarburato/hid-tminit
Signed-off-by: Dario Pagani <dario.pagani.146@gmail.com>
Co-developed-by: Kim Kuparinen <kimi.h.kuparinen@gmail.com>
Signed-off-by: Kim Kuparinen <kimi.h.kuparinen@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Valid HID_GENERIC type of devices set EV_KEY and EV_ABS by wacom_map_usage.
When *_input_capabilities are reached, those devices should already have
their proper EV_* set. EV_KEY and EV_ABS only need to be set for
non-HID_GENERIC type of devices in *_input_capabilities.
Devices that don't support HID descitoprs will pass back to hid-input for
registration without being accidentally rejected by the introduction of
patch: "Input: refuse to register absolute devices without absinfo"
Fixes: 6ecfe51b40 ("Input: refuse to register absolute devices without absinfo")
Signed-off-by: Ping Cheng <ping.cheng@wacom.com>
Reviewed-by: Jason Gerecke <Jason.Gerecke@wacom.com>
Tested-by: Juan Garrido <Juan.Garrido@wacom.com>
CC: stable@vger.kernel.org
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The FTDI FT260 chip implements USB to I2C/UART bridges through two
USB HID class interfaces. The first - for I2C, and the second for UART.
Each interface is independent, and the kernel detects it as a separate
USB hidraw device.
This commit adds I2C host adapter support.
Signed-off-by: Michael Zaidman <michael.zaidman@gmail.com>
Tested-by: Aaron Jones (FTDI-UK) <aaron.jones@ftdichip.com
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The driver core ignores the return value of struct bus_type::remove()
because there is only little that can be done. To simplify the quest to
make this function return void, let struct ishtp_cl_driver::remove() return
void, too. All users already unconditionally return 0, this commit makes
it obvious that returning an error value is a bad idea.
Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
There is only a single change in behavior: Now dev->driver isn't modified.
Assigning to this variable is in the domain of the driver core only. (And
it's done in __device_release_driver shortly after bus->remove() (i.e
ishtp_cl_device_remove() here) returns.)
Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
A remove callback is only ever called for a bound device. So there is no
need to check for device or driver being NULL.
Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Some BIOS-es do not initialize the activestatus bits of the AMD_P2C_MSG3
register. This cause the AMD_SFH driver to not register any sensors even
though the laptops in question do have sensors.
Add a DMI quirk-table for specifying sensor-mask overrides based on
DMI match, to make the sensors work OOTB on these laptop models.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=199715
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1651886
Fixes: 4f567b9f81 ("SFH: PCIe driver to add support of AMD sensor fusion hub")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Sandeep Singh <sandeep.singh@amd.com
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add a sensor_mask module parameter which can be used to override the
sensor-mask read from the activestatus bits of the AMD_P2C_MSG3
registers. Some BIOS-es do not program the activestatus bits, leading
to the AMD-SFH driver not registering any HID devices even though the
laptop in question does actually have sensors.
While at it also fix the wrong indentation of the MAGNO_EN define.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=199715
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1651886
Fixes: 4f567b9f81 ("SFH: PCIe driver to add support of AMD sensor fusion hub")
Suggested-by: Richard Neumann <mail@richard-neumann.de>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Sandeep Singh <sandeep.singh@amd.com
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This value is only used once inside amd_mp2_get_sensor_num(),
so there is no need to store this in the amd_mp2_dev struct,
amd_mp2_get_sensor_num() can simple use a local variable for this.
Fixes: 4f567b9f81 ("SFH: PCIe driver to add support of AMD sensor fusion hub")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Sandeep Singh <sandeep.singh@amd.com
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
In lk 5.11.0-rc2 connecting a USB based Silicon Labs HID to I2C
bridge evaluation board (CP2112EK) causes this warning:
gpio gpiochip0: (cp2112_gpio): detected irqchip that is shared
with multiple gpiochips: please fix the driver
Simply copy what other gpio related drivers do to fix this
particular warning: replicate the struct irq_chip object in each
device instance rather than have a static object which makes that
object (incorrectly) shared by each device.
Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
When input_register_device() fails, no error return code is assigned.
To fix this bug, ret is assigned with -ENOENT as error return code.
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Some new 2021 version of ASUS gamer laptops are using an updated
N-Key keyboard with the PID of 0x19b6. This version is using the
same init sequence and brightness control as the 0x1866 keyboard.
Signed-off-by: Luke D Jones <luke@ljones.dev>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The only caller of this function only cares about gross success/failure
but we still might as well resolve the following smatch warning and fix
the other error paths as well:
hiddev.c:894 hiddev_connect() warn: returning -1 instead of -ENOMEM is sloppy
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Plantronics Blackwire 3220 Series (047f:c056) sends HID reports twice
for each volume key press. This patch adds a quirk to hid-plantronics
for this product ID, which will ignore the second volume key press if
it happens within 5 ms from the last one that was handled.
The patch was tested on the mentioned model only, it shouldn't affect
other models, however, this quirk might be needed for them too.
Auto-repeat (when a key is held pressed) is not affected, because the
rate is about 3 times per second, which is far less frequent than once
in 5 ms.
Fixes: 81bb773fae ("HID: plantronics: Update to map volume up/down controls")
Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The Dinovo Edge and Dinovo Mini keyboards with builtin touchpad come with
a different version of the quad/bt2.0 combo receivers shipped with the
MX5000 and MX5500 keyboards. These receivers are compatible with one
another, e.g. the Dinovo Edge keyboard can be paired with the MX5000
receiver.
Like the MX5x00 receivers in HID proxy mode these receivers present
themselves as a hub with multiple USB-HID devices, one for the keyboard
and one for the mouse.
Where they differ is that the mouse USB-device has 2 input reports for
reporting mice events. It has the exact same INPUT(2) report as the
MX5x00 receivers, but it also has a second INPUT(5) mouse report which
is different; and when the Dinovo receivers are paired with the Dinovo
keyboards the second INPUT(5) mouse report is actually used for events
on the builtin touchpad.
Add support for handling the Dinovo quad/bluetooth-2.0 combo receivers
in HID proxy mode to logitech-dj, like we already do for the similar
MX5000 and MX5500 receivers.
This adds battery monitoring functionality (through logitech-hidpp) and
fixes the Phone (Fn + F1) and "[A]" - "[D]" (Fn + F9 - F12) hotkeys not
working on the Dinovo Edge.
Note these receivers present themselves as a hub with 2 separate USB
devices for the keyboard and mouse; and the logitech-dj code needs to
bind to both devices (just as with the MX5x00 receivers).
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The logitech-dj code already uses hid-ids.h defines for almost all devices
it supports. Lets be consistent: add and use hid-ids.h defines for the
G700, MX5000 and MX5500 receivers too.
Also add / update some comments to make the comment style in the
hid_device_id table consistent too.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The driver depends on ACPI, ACPI_PTR() resolution is always the same.
Otherwise a compiler may produce a warning.
That said, the rule of thumb either ugly ifdeffery with ACPI_PTR or
none should be used in a driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Move static GUID variable out of the function and add a comment
how it looks like in the human readable representation.
While at it, include uuid.h since the guid_t type is defined in it.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Switch to the new style i2c-driver probe_new probe function.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Currently the ACPI companion and handle are retrieved and checked
a few times in different functions. Instead get ACPI companion only
once and reuse it everywhere.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Pull HID updates from Jiri Kosina:
- support for "Unified Battery" feature on Logitech devices from Filipe
Laíns
- power management improvements for intel-ish driver from Zhang Lixu
- support for Goodix devices from Douglas Anderson
- improved handling of generic HID keyboard in order to make it easier
for userspace to figure out the details of the device, from Dmitry
Torokhov
- Playstation DualSense support from Roderick Colenbrander
- other assorted small fixes and device ID additions.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (49 commits)
HID: playstation: add DualSense player LED support.
HID: playstation: add microphone mute support for DualSense.
HID: playstation: add initial DualSense lightbar support.
HID: wacom: Ignore attempts to overwrite the touch_max value from HID
HID: playstation: fix array size comparison (off-by-one)
HID: playstation: fix unused variable in ps_battery_get_property.
HID: playstation: report DualSense hardware and firmware version.
HID: playstation: add DualSense classic rumble support.
HID: playstation: add DualSense Bluetooth support.
HID: playstation: track devices in list.
HID: playstation: add DualSense accelerometer and gyroscope support.
HID: playstation: add DualSense touchpad support.
HID: playstation: add DualSense battery support.
HID: playstation: use DualSense MAC address as unique identifier.
HID: playstation: initial DualSense USB support.
HID: ite: Enable QUIRK_TOUCHPAD_ON_OFF_REPORT on Acer Aspire Switch 10E
HID: Ignore battery for Elan touchscreen on HP Spectre X360 15-df0xxx
HID: logitech-dj: add support for the new lightspeed connection iteration
HID: intel-ish-hid: ipc: Add Tiger Lake H PCI device ID
HID: logitech-dj: add support for keyboard events in eQUAD step 4 Gaming
...
- hid-multitouch devices should be put into high-latency mode when
suspended in order to be in line with Windows Precision Touchpad
guidelines. From Blaž Hrastnik.
- improved handling of generic HID keyboard (no more splitting system
and consumer controls away), in order to make it easier for userspace
to figure out the details of the device easier. From Dmitry Torokhov.
- report data sanitization fixes from Will McVicker and Randy Dunlap
