[ Upstream commit 67cf52cdb6 ]
When dumping the control flow graphs for programs using the 16-byte long
load instruction, we need to skip the second part of this instruction
when looking for the next instruction to process. Otherwise, we end up
printing "BUG_ld_00" from the kernel disassembler in the CFG.
Fixes: efcef17a6d ("tools: bpftool: generate .dot graph from CFG information")
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/r/20230405132120.59886-3-quentin@isovalent.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5af607a861 ]
In some cases the loopback latency might be large enough, causing
the assertion on invocations to be run before ingress prog getting
executed. The assertion would fail and the test would flake.
This can be reliably reproduced by arbitrarily increasing the
loopback latency (thanks to [1]):
tc qdisc add dev lo root handle 1: htb default 12
tc class add dev lo parent 1:1 classid 1:12 htb rate 20kbps ceil 20kbps
tc qdisc add dev lo parent 1:12 netem delay 100ms
Fix this by waiting on the receive end, instead of instantly
returning to the assert. The call to read() will wait for the
default SO_RCVTIMEO timeout of 3 seconds provided by
start_server().
[1] https://gist.github.com/kstevens715/4598301
Reported-by: Martin KaFai Lau <martin.lau@linux.dev>
Link: https://lore.kernel.org/bpf/9c5c8b7e-1d89-a3af-5400-14fde81f4429@linux.dev/
Fixes: 3573f38401 ("selftests/bpf: Test CGROUP_STORAGE behavior on shared egress + ingress")
Acked-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: YiFei Zhu <zhuyifei@google.com>
Link: https://lore.kernel.org/r/20230405193354.1956209-1-zhuyifei@google.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f2b50f1726 ]
This change fixes flakiness in the BIDIRECTIONAL test:
# [is_pkt_valid] expected length [60], got length [90]
not ok 1 FAIL: SKB BUSY-POLL BIDIRECTIONAL
When IPv6 is enabled, the interface will periodically send MLDv1 and
MLDv2 packets. These packets can cause the BIDIRECTIONAL test to fail
since it uses VETH0 for RX.
For other tests, this was not a problem since they only receive on VETH1
and IPv6 was already disabled on VETH0.
Fixes: a89052572e ("selftests/bpf: Xsk selftests framework")
Signed-off-by: Kal Conley <kal.conley@dectris.com>
Link: https://lore.kernel.org/r/20230405082905.6303-1-kal.conley@dectris.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 226efec2b0 ]
In __start_server, it leaks a fd when setsockopt(SO_REUSEPORT) fails.
This patch fixes it.
Fixes: eed92afdd1 ("bpf: selftest: Test batching and bpf_(get|set)sockopt in bpf tcp iter")
Reported-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20230316000726.1016773-2-martin.lau@linux.dev
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c679bbd611 ]
RFC8259 ("The JavaScript Object Notation (JSON) Data Interchange
Format") only specifies \", \\, \/, \b, \f, \n, \r, and \r as valid
two-character escape sequences. This does not include \', which is not
required in JSON because it exclusively uses double quotes as string
separators.
Solidus (/) may be escaped, but does not have to. Only reverse
solidus (\), double quotes ("), and the control characters have to be
escaped. Therefore, with this fix, bpftool correctly supports all valid
two-character escape sequences (but still does not support characters
that require multi-character escape sequences).
Witout this fix, attempting to load a JSON file generated by bpftool
using Python 3.10.6's default json.load() may fail with the error
"Invalid \escape" if the file contains the invalid escaped single
quote (\').
Fixes: b66e907cfe ("tools: bpftool: copy JSON writer from iproute2 repository")
Signed-off-by: Luis Gerhorst <gerhorst@cs.fau.de>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20230227150853.16863-1-gerhorst@cs.fau.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4e347bdf44 ]
Leaf Fn00000007 contains avx512bw at bit 26 and avx512vl at bit 28. This
is incorrect per the SDM. Correct avx512bw to be bit 30 and avx512lvl to
be bit 31.
Fixes: c6b2f240bf ("tools/x86: Add a kcpuid tool to show raw CPU features")
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Feng Tang <feng.tang@intel.com>
Link: https://lore.kernel.org/r/20230206141832.4162264-2-terry.bowman@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0d45c83b95 ]
MBA test case writes schemata but it does not check if the write is
successful or not.
Add the error check and return error properly.
Fixes: 01fee6b4d1 ("selftests/resctrl: Add MBA test")
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fa10366cc6 ]
resctrl_val() assumes ->setup() always returns either 0 to continue
tests or < 0 in case of the normal termination of tests after x runs.
The latter overlaps with normal error returns.
Define END_OF_TESTS (=1) to differentiate the normal termination of
tests and return errors as negative values. Alter callers of ->setup()
to handle errors properly.
Fixes: 790bf585b0 ("selftests/resctrl: Add Cache Allocation Technology (CAT) selftest")
Fixes: ecdbb911f2 ("selftests/resctrl: Add MBM test")
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c90b3b588e ]
resctrl_val() function is called only by MBM, MBA, and CMT tests which
means the else branch is never used.
Both test branches call param->setup().
Remove the unused else branch and place the ->setup() call outside of
the test specific branches reducing code duplication.
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Stable-dep-of: fa10366cc6 ("selftests/resctrl: Allow ->setup() to return errors")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6220f69e72 ]
Currently, the resctrl_tests only has a function to detect AMD vendor.
Since when the Intel Sub-NUMA Clustering feature is enabled,
Intel CMT and MBM counters may not be accurate,
the resctrl_tests also need a function to detect Intel vendor.
And in the future, resctrl_tests will need a function to detect different
vendors, such as Arm.
Extend the function to detect Intel vendor as well. Also,
this function can be easily extended to detect other vendors.
Signed-off-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Stable-dep-of: fa10366cc6 ("selftests/resctrl: Allow ->setup() to return errors")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 22a8be2803 ]
malloc_and_init_memory() in fill_buf isn't checking if memalign()
successfully allocated memory or not before accessing the memory.
Check the return value of memalign() and return NULL if allocating
aligned memory fails.
Fixes: a2561b12fe ("selftests/resctrl: Add built in benchmark")
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f1594bc676 ]
When compiling selftests with target mount_setattr I encountered some errors with the below messages:
mount_setattr_test.c: In function ‘mount_setattr_thread’:
mount_setattr_test.c:343:16: error: variable ‘attr’ has initializer but incomplete type
343 | struct mount_attr attr = {
| ^~~~~~~~~~
These errors might be because of linux/mount.h is not included. This patch resolves that issue.
Signed-off-by: Anh Tuan Phan <tuananhlfc@gmail.com>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
The "Fixes" commit mentioned below adds new MIBs counters to track some
particular cases that have been fixed by its parent commit 150d1e06c4
("mptcp: fix race in incoming ADD_ADDR option processing").
Unfortunately, one of the new MIB counter (AddAddrDrop) shares the same
prefix as an older one (AddAddr). This breaks one selftest because it
was doing a grep on "AddAddr" and it now gets 2 counters instead of 1.
This issue has been fixed upstream in a commit that was part of the same
set but not backported to v5.15, see commit 6ef84b1517 ("selftests:
mptcp: more robust signal race test"). It has not been backported
because it was fixing multiple things, some where for >v5.15.
This patch then simply extracts the only bit needed for v5.15. Now the
test passes when validating the last stable v5.15 kernel.
Fixes: f25ae162f4 ("mptcp: add mibs counter for ignored incoming options")
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 303f8e2d02 upstream.
When running a test program, 'run_one()' checks if the program has the
execution permission and fails if it doesn't. However, it's easy to
mistakenly lose the permissions, as some common tools like 'diff' don't
support the permission change well[1]. Compared to that, making mistakes
in the test program's path would only rare, as those are explicitly listed
in 'TEST_PROGS'. Therefore, it might make more sense to resolve the
situation on our own and run the program.
For this reason, this commit makes the test program runner function still
print the warning message but to try parsing the interpreter of the
program and to explicitly run it with the interpreter, in this case.
[1] https://lore.kernel.org/mm-commits/YRJisBs9AunccCD4@kroah.com/
Link: https://lkml.kernel.org/r/20210810164534.25902-1-sj38.park@gmail.com
Signed-off-by: SeongJae Park <sjpark@amazon.de>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 05107edc91 ]
Building sigaltstack with clang via:
$ ARCH=x86 make LLVM=1 -C tools/testing/selftests/sigaltstack/
produces the following warning:
warning: variable 'sp' is uninitialized when used here [-Wuninitialized]
if (sp < (unsigned long)sstack ||
^~
Clang expects these to be declared at global scope; we've fixed this in
the kernel proper by using the macro `current_stack_pointer`. This is
defined in different headers for different target architectures, so just
create a new header that defines the arch-specific register names for
the stack pointer register, and define it for more targets (at least the
ones that support current_stack_pointer/ARCH_HAS_CURRENT_STACK_POINTER).
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Link: https://lore.kernel.org/lkml/CA+G9fYsi3OOu7yCsMutpzKDnBMAzJBCPimBp86LhGBa0eCnEpA@mail.gmail.com/
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 872aec4b5f ]
btf_dump APIs emit unnecessary tabs when emitting struct/union
definition that fits on the single line. Before this patch we'd get:
struct blah {<tab>};
This patch fixes this and makes sure that we get more natural:
struct blah {};
Fixes: 44a726c3f2 ("bpftool: Print newline before '}' for struct with padding only fields")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20221212211505.558851-2-andrii@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 44a726c3f2 ]
btf_dump_emit_struct_def attempts to print empty structures at a
single line, e.g. `struct empty {}`. However, it has to account for a
case when there are no regular but some padding fields in the struct.
In such case `vlen` would be zero, but size would be non-zero.
E.g. here is struct bpf_timer from vmlinux.h before this patch:
struct bpf_timer {
long: 64;
long: 64;};
And after this patch:
struct bpf_dynptr {
long: 64;
long: 64;
};
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221001104425.415768-1-eddyz87@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4fb877aaa1 ]
Fix bug in btf_dump's logic of determining if a given struct type is
packed or not. The notion of "natural alignment" is not needed and is
even harmful in this case, so drop it altogether. The biggest difference
in btf_is_struct_packed() compared to its original implementation is
that we don't really use btf__align_of() to determine overall alignment
of a struct type (because it could be 1 for both packed and non-packed
struct, depending on specifci field definitions), and just use field's
actual alignment to calculate whether any field is requiring packing or
struct's size overall necessitates packing.
Add two simple test cases that demonstrate the difference this change
would make.
Fixes: ea2ce1ba99 ("libbpf: Fix BTF-to-C converter's padding logic")
Reported-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20221215183605.4149488-1-andrii@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ea2ce1ba99 ]
Turns out that btf_dump API doesn't handle a bunch of tricky corner
cases, as reported by Per, and further discovered using his testing
Python script ([0]).
This patch revamps btf_dump's padding logic significantly, making it
more correct and also avoiding unnecessary explicit padding, where
compiler would pad naturally. This overall topic turned out to be very
tricky and subtle, there are lots of subtle corner cases. The comments
in the code tries to give some clues, but comments themselves are
supposed to be paired with good understanding of C alignment and padding
rules. Plus some experimentation to figure out subtle things like
whether `long :0;` means that struct is now forced to be long-aligned
(no, it's not, turns out).
Anyways, Per's script, while not completely correct in some known
situations, doesn't show any obvious cases where this logic breaks, so
this is a nice improvement over the previous state of this logic.
Some selftests had to be adjusted to accommodate better use of natural
alignment rules, eliminating some unnecessary padding, or changing it to
`type: 0;` alignment markers.
Note also that for when we are in between bitfields, we emit explicit
bit size, while otherwise we use `: 0`, this feels much more natural in
practice.
Next patch will add few more test cases, found through randomized Per's
script.
[0] https://lore.kernel.org/bpf/85f83c333f5355c8ac026f835b18d15060725fcb.camel@ericsson.com/
Reported-by: Per Sundström XP <per.xp.sundstrom@ericsson.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20221212211505.558851-6-andrii@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d503f1176b ]
Structures with zero regular fields but some padding constitute a
special case in btf_dump.c:btf_dump_emit_struct_def with regards to
newline before closing '}'.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221001104425.415768-2-eddyz87@gmail.com
Stable-dep-of: ea2ce1ba99 ("libbpf: Fix BTF-to-C converter's padding logic")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 92c2539358 ]
The "excursion to minimum" information is in bit2
in HWP_STATUS MSR. Fix the bitmask used for
decoding the register.
Signed-off-by: Antti Laakso <antti.laakso@intel.com>
Reviewed-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 40aafc7d58 ]
When running as non-root the following error is seen in turbostat:
turbostat: fopen /dev/cpu_dma_latency
: Permission denied
turbostat and the man page have information on how to avoid other
permission errors, so these can be fixed the same way.
Provide better /dev/cpu_dma_latency warnings that provide instructions on
how to avoid the error, and update the man page.
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Cc: linux-pm@vger.kernel.org
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ca22da2fbd ]
William reports kernel soft-lockups on some OVS topologies when TC mirred
egress->ingress action is hit by local TCP traffic [1].
The same can also be reproduced with SCTP (thanks Xin for verifying), when
client and server reach themselves through mirred egress to ingress, and
one of the two peers sends a "heartbeat" packet (from within a timer).
Enqueueing to backlog proved to fix this soft lockup; however, as Cong
noticed [2], we should preserve - when possible - the current mirred
behavior that counts as "overlimits" any eventual packet drop subsequent to
the mirred forwarding action [3]. A compromise solution might use the
backlog only when tcf_mirred_act() has a nest level greater than one:
change tcf_mirred_forward() accordingly.
Also, add a kselftest that can reproduce the lockup and verifies TC mirred
ability to account for further packet drops after TC mirred egress->ingress
(when the nest level is 1).
[1] https://lore.kernel.org/netdev/33dc43f587ec1388ba456b4915c75f02a8aae226.1663945716.git.dcaratti@redhat.com/
[2] https://lore.kernel.org/netdev/Y0w%2FWWY60gqrtGLp@pop-os.localdomain/
[3] such behavior is not guaranteed: for example, if RPS or skb RX
timestamping is enabled on the mirred target device, the kernel
can defer receiving the skb and return NET_RX_SUCCESS inside
tcf_mirred_forward().
Reported-by: William Zhao <wizhao@redhat.com>
CC: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dfdd608c3b ]
Add a regression test that ensures that a VAR pointing at a
modifier which follows a PTR (or STRUCT or ARRAY) is resolved
correctly by the datasec validator.
Signed-off-by: Lorenz Bauer <lmb@isovalent.com>
Link: https://lore.kernel.org/r/20230306112138.155352-3-lmb@isovalent.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b69245126a ]
Since commit 6c40624930 ("bootconfig: Increase max nodes of bootconfig
from 1024 to 8192 for DCC support") increased the max number of bootconfig
node to 8192, the bootconfig testcase of the max number of nodes fails.
To fix this issue, we can not simply increase the number in the test script
because the test bootconfig file becomes too big (>32KB). To fix that, we
can use a combination of three alphabets (26^3 = 17576). But with that,
we can not express the 8193 (just one exceed from the limitation) because
it also exceeds the max size of bootconfig. So, the first 26 nodes will just
use one alphabet.
With this fix, test-bootconfig.sh passes all tests.
Link: https://lore.kernel.org/all/167888844790.791176.670805252426835131.stgit@devnote2/
Reported-by: Heinz Wiesinger <pprkut@slackware.com>
Link: https://lore.kernel.org/all/2463802.XAFRqVoOGU@amaterasu.liwjatan.org
Fixes: 6c40624930 ("bootconfig: Increase max nodes of bootconfig from 1024 to 8192 for DCC support")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 24994513ad ]
The `devlink -j port show` command output may not contain the "flavour"
key, an example from Ubuntu 22.10 s390x LPAR(5.19.0-37-generic), with
mlx4 driver and iproute2-5.15.0:
{"port":{"pci/0001:00:00.0/1":{"type":"eth","netdev":"ens301"},
"pci/0001:00:00.0/2":{"type":"eth","netdev":"ens301d1"},
"pci/0002:00:00.0/1":{"type":"eth","netdev":"ens317"},
"pci/0002:00:00.0/2":{"type":"eth","netdev":"ens317d1"}}}
This will cause a KeyError exception.
Create a validate_devlink_output() to check for this "flavour" from
devlink command output to avoid this KeyError exception. Also let
it handle the check for `devlink -j dev show` output in main().
Apart from this, if the test was not started because the max lanes of
the designated device is 0. The script will still return 0 and thus
causing a false-negative test result.
Use a found_max_lanes flag to determine if these tests were skipped
due to this reason and return KSFT_SKIP to make it more clear.
Link: https://bugs.launchpad.net/bugs/1937133
Fixes: f3348a82e7 ("selftests: net: Add port split test")
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Link: https://lore.kernel.org/r/20230315165353.229590-1-po-hsu.lin@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 600b7b26c0 upstream.
binutils changed the signature of init_disassemble_info(), which now causes
compilation to fail for tools/bpf/bpftool/jit_disasm.c, e.g. on debian
unstable.
Relevant binutils commit:
https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=60a3da00bd5407f07
Wire up the feature test and switch to init_disassemble_info_compat(),
which were introduced in prior commits, fixing the compilation failure.
I verified that bpftool can still disassemble bpf programs, both with an
old and new dis-asm.h API. There are no output changes for plain and json
formats. When comparing the output from old binutils (2.35)
to new bintuils with the patch (upstream snapshot) there are a few output
differences, but they are unrelated to this patch. An example hunk is:
2f: pop %r14
31: pop %r13
33: pop %rbx
- 34: leaveq
- 35: retq
+ 34: leave
+ 35: ret
Signed-off-by: Andres Freund <andres@anarazel.de>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Ben Hutchings <benh@debian.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Quentin Monnet <quentin@isovalent.com>
Cc: Sedat Dilek <sedat.dilek@gmail.com>
Cc: bpf@vger.kernel.org
Link: http://lore.kernel.org/lkml/20220622181918.ykrs5rsnmx3og4sv@alap3.anarazel.de
Link: https://lore.kernel.org/r/20220801013834.156015-8-andres@anarazel.de
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 96ed066054 upstream.
binutils changed the signature of init_disassemble_info(), which now causes
compilation to fail for tools/bpf/bpf_jit_disasm.c, e.g. on debian
unstable.
Relevant binutils commit:
https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=60a3da00bd5407f07
Wire up the feature test and switch to init_disassemble_info_compat(),
which were introduced in prior commits, fixing the compilation failure.
I verified that bpf_jit_disasm can still disassemble bpf programs, both
with the old and new dis-asm.h API. With old binutils there's no change in
output before/after this patch. When comparing the output from old
binutils (2.35) to new bintuils with the patch (upstream snapshot) there
are a few output differences, but they are unrelated to this patch. An
example hunk is:
f4: mov %r14,%rsi
f7: mov %r15,%rdx
fa: mov $0x2a,%ecx
- ff: callq 0xffffffffea8c4988
+ ff: call 0xffffffffea8c4988
104: test %rax,%rax
107: jge 0x0000000000000110
109: xor %eax,%eax
- 10b: jmpq 0x0000000000000073
+ 10b: jmp 0x0000000000000073
110: cmp $0x16,%rax
However, I had to use an older kernel to generate the bpf_jit_enabled =
2 output, as that has been broken since 5.18 / 1022a5498f ("bpf,
x86_64: Use bpf_jit_binary_pack_alloc").
https://lore.kernel.org/20220703030210.pmjft7qc2eajzi6c@alap3.anarazel.de
Signed-off-by: Andres Freund <andres@anarazel.de>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Ben Hutchings <benh@debian.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Quentin Monnet <quentin@isovalent.com>
Cc: Sedat Dilek <sedat.dilek@gmail.com>
Cc: bpf@vger.kernel.org
Link: http://lore.kernel.org/lkml/20220622181918.ykrs5rsnmx3og4sv@alap3.anarazel.de
Link: https://lore.kernel.org/r/20220801013834.156015-6-andres@anarazel.de
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 83aa012048 upstream.
binutils changed the signature of init_disassemble_info(), which now causes
compilation failures for tools/perf/util/annotate.c, e.g. on debian
unstable.
Relevant binutils commit:
https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=60a3da00bd5407f07
Wire up the feature test and switch to init_disassemble_info_compat(),
which were introduced in prior commits, fixing the compilation failure.
I verified that perf can still disassemble bpf programs by using bpftrace
under load, recording a perf trace, and then annotating the bpf "function"
with and without the changes. With old binutils there's no change in output
before/after this patch. When comparing the output from old binutils (2.35)
to new bintuils with the patch (upstream snapshot) there are a few output
differences, but they are unrelated to this patch. An example hunk is:
1.15 : 55:mov %rbp,%rdx
0.00 : 58:add $0xfffffffffffffff8,%rdx
0.00 : 5c:xor %ecx,%ecx
- 1.03 : 5e:callq 0xffffffffe12aca3c
+ 1.03 : 5e:call 0xffffffffe12aca3c
0.00 : 63:xor %eax,%eax
- 2.18 : 65:leaveq
- 2.82 : 66:retq
+ 2.18 : 65:leave
+ 2.82 : 66:ret
Signed-off-by: Andres Freund <andres@anarazel.de>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Ben Hutchings <benh@debian.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Sedat Dilek <sedat.dilek@gmail.com>
Cc: bpf@vger.kernel.org
Link: http://lore.kernel.org/lkml/20220622181918.ykrs5rsnmx3og4sv@alap3.anarazel.de
Link: https://lore.kernel.org/r/20220801013834.156015-5-andres@anarazel.de
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a45b3d6926 upstream.
binutils changed the signature of init_disassemble_info(), which now causes
compilation failures for tools/{perf,bpf}, e.g. on debian unstable.
Relevant binutils commit:
https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=60a3da00bd5407f07
This commit introduces a wrapper for init_disassemble_info(), to avoid
spreading #ifdef DISASM_INIT_STYLED to a bunch of places. Subsequent
commits will use it to fix the build failures.
It likely is worth adding a wrapper for disassember(), to avoid the already
existing DISASM_FOUR_ARGS_SIGNATURE ifdefery.
Signed-off-by: Andres Freund <andres@anarazel.de>
Signed-off-by: Ben Hutchings <benh@debian.org>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Ben Hutchings <benh@debian.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Quentin Monnet <quentin@isovalent.com>
Cc: Sedat Dilek <sedat.dilek@gmail.com>
Cc: bpf@vger.kernel.org
Link: http://lore.kernel.org/lkml/20220622181918.ykrs5rsnmx3og4sv@alap3.anarazel.de
Link: https://lore.kernel.org/r/20220801013834.156015-4-andres@anarazel.de
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cfd59ca914 upstream.
binutils changed the signature of init_disassemble_info(), which now causes
compilation failures for tools/{perf,bpf}, e.g. on debian unstable.
Relevant binutils commit:
https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=60a3da00bd5407f07
This commit adds a feature test to detect the new signature. Subsequent
commits will use it to fix the build failures.
Signed-off-by: Andres Freund <andres@anarazel.de>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Ben Hutchings <benh@debian.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Quentin Monnet <quentin@isovalent.com>
Cc: Sedat Dilek <sedat.dilek@gmail.com>
Cc: bpf@vger.kernel.org
Link: http://lore.kernel.org/lkml/20220622181918.ykrs5rsnmx3og4sv@alap3.anarazel.de
Link: https://lore.kernel.org/r/20220801013834.156015-2-andres@anarazel.de
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 25f69c69bc ]
When creating counters with initial delay configured, the enable_on_exec
field is not set. So we need to enable the counters later. The problem
is, when a workload is specified the target__none() is true. So we also
need to check stat_config.initial_delay.
In this change, we add a new field 'initial_delay' for struct target
which could be shared by other subcommands. And define
target__enable_on_exec() which returns whether enable_on_exec should be
set on normal cases.
Before this fix the event is not counted:
$ ./perf stat -e instructions -D 100 sleep 2
Events disabled
Events enabled
Performance counter stats for 'sleep 2':
<not counted> instructions
1.901661124 seconds time elapsed
0.001602000 seconds user
0.000000000 seconds sys
After fix it works:
$ ./perf stat -e instructions -D 100 sleep 2
Events disabled
Events enabled
Performance counter stats for 'sleep 2':
404,214 instructions
1.901743475 seconds time elapsed
0.001617000 seconds user
0.000000000 seconds sys
Fixes: c587e77e10 ("perf stat: Do not delay the workload with --delay")
Signed-off-by: Changbin Du <changbin.du@huawei.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Hui Wang <hw.huiwang@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230302031146.2801588-2-changbin.du@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2067e7a00a ]
The test_local_dnat_portonly() function initiates the client-side as
soon as it sets the listening side to the background. This could lead to
a race condition where the server may not be ready to listen. To ensure
that the server-side is up and running before initiating the
client-side, a delay is introduced to the test_local_dnat_portonly()
function.
Before the fix:
# ./nft_nat.sh
PASS: netns routing/connectivity: ns0-rthlYrBU can reach ns1-rthlYrBU and ns2-rthlYrBU
PASS: ping to ns1-rthlYrBU was ip NATted to ns2-rthlYrBU
PASS: ping to ns1-rthlYrBU OK after ip nat output chain flush
PASS: ipv6 ping to ns1-rthlYrBU was ip6 NATted to ns2-rthlYrBU
2023/02/27 04:11:03 socat[6055] E connect(5, AF=2 10.0.1.99:2000, 16): Connection refused
ERROR: inet port rewrite
After the fix:
# ./nft_nat.sh
PASS: netns routing/connectivity: ns0-9sPJV6JJ can reach ns1-9sPJV6JJ and ns2-9sPJV6JJ
PASS: ping to ns1-9sPJV6JJ was ip NATted to ns2-9sPJV6JJ
PASS: ping to ns1-9sPJV6JJ OK after ip nat output chain flush
PASS: ipv6 ping to ns1-9sPJV6JJ was ip6 NATted to ns2-9sPJV6JJ
PASS: inet port rewrite without l3 address
Fixes: 282e5f8fe9 ("netfilter: nat: really support inet nat without l3 address")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit ce9f1c05d2 upstream.
When MMAP2 has the PERF_RECORD_MISC_MMAP_BUILD_ID flag, it means the
record already has the build-id info. So it marks the DSO as hit, to
skip if the same DSO is not processed if it happens to miss the build-id
later.
But it missed to copy the MMAP2 record itself so it'd fail to symbolize
samples for those regions.
For example, the following generates 249 MMAP2 events.
$ perf record --buildid-mmap -o- true | perf report --stat -i- | grep MMAP2
MMAP2 events: 249 (86.8%)
Adding perf inject should not change the number of events like this
$ perf record --buildid-mmap -o- true | perf inject -b | \
> perf report --stat -i- | grep MMAP2
MMAP2 events: 249 (86.5%)
But when --buildid-all is used, it eats most of the MMAP2 events.
$ perf record --buildid-mmap -o- true | perf inject -b --buildid-all | \
> perf report --stat -i- | grep MMAP2
MMAP2 events: 1 ( 2.5%)
With this patch, it shows the original number now.
$ perf record --buildid-mmap -o- true | perf inject -b --buildid-all | \
> perf report --stat -i- | grep MMAP2
MMAP2 events: 249 (86.5%)
Committer testing:
Before:
$ perf record --buildid-mmap -o- perf stat --null sleep 1 2> /dev/null | perf inject -b | perf report --stat -i- | grep MMAP2
MMAP2 events: 58 (36.2%)
$ perf record --buildid-mmap -o- perf stat --null sleep 1 2> /dev/null | perf report --stat -i- | grep MMAP2
MMAP2 events: 58 (36.2%)
$ perf record --buildid-mmap -o- perf stat --null sleep 1 2> /dev/null | perf inject -b --buildid-all | perf report --stat -i- | grep MMAP2
MMAP2 events: 2 ( 1.9%)
$
After:
$ perf record --buildid-mmap -o- perf stat --null sleep 1 2> /dev/null | perf inject -b | perf report --stat -i- | grep MMAP2
MMAP2 events: 58 (29.3%)
$ perf record --buildid-mmap -o- perf stat --null sleep 1 2> /dev/null | perf report --stat -i- | grep MMAP2
MMAP2 events: 58 (34.3%)
$ perf record --buildid-mmap -o- perf stat --null sleep 1 2> /dev/null | perf inject -b --buildid-all | perf report --stat -i- | grep MMAP2
MMAP2 events: 58 (38.4%)
$
Fixes: f7fc0d1c91 ("perf inject: Do not inject BUILD_ID record if MMAP2 has it")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230223070155.54251-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f2edf0c819 ]
1. fopen sysfs without fclose.
2. asprintf filename without free.
3. if asprintf return error,do not need to free the buffer.
Signed-off-by: Yulong Zhang <yulong.zhang@metoak.net>
Link: https://lore.kernel.org/r/20230117025147.69890-1-yulong.zhang@metoak.net
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3da73f1023 ]
strdup() allocates memory for key_name. We need to release the memory in
the following error paths. Add free() to avoid memory leak.
Fixes: 1e7e478838 ("x86/static_call: Add inline static call implementation for x86-64")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20221205080642.558583-1-linmq006@gmail.com
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 2750af50a3 upstream.
As of Intel SDM (https://www.intel.com/sdm) version 076, there is a new
Intel PT feature called Event Trace which requires 2 new packets CFE and
EVD. Add them to the packet decoder and packet decoder test.
Committer notes:
I got the "Intel® 64 and IA-32 architectures software developer’s manual
combined volumes: 1, 2A, 2B, 2C, 2D, 3A, 3B, 3C, 3D, and 4" PDF at:
https://cdrdv2.intel.com/v1/dl/getContent/671200
And these new packets are described in page 3951:
<quote>
32.2.4
Event Trace is a capability that exposes details about the asynchronous
events, when they are generated, and when their corresponding software
event handler completes execution. These include:
o Interrupts, including NMI and SMI, including the interrupt vector when
defined.
o Faults, exceptions including the fault vector.
— Page faults additionally include the page fault address, when in context.
o Event handler returns, including IRET and RSM.
o VM exits and VM entries.¹
— VM exits include the values written to the “exit reason” and “exit qualification” VMCS fields.
INIT and SIPI events.
o TSX aborts, including the abort status returned for the RTM instructions.
o Shutdown.
Additionally, it provides indication of the status of the Interrupt Flag
(IF), to indicate when interrupts are masked.
</quote>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20220124084201.2699795-4-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cf8c59a375 upstream.
A single & will create a background process and return true, so the grep
command will run even if the file checked in the first condition does not
exist.
Link: https://lore.kernel.org/all/20230112114215.17103-1-antonio.feijoo@suse.com/
Fixes: 1eaad3ac3f ("tools/bootconfig: Use per-group/all enable option in ftrace2bconf script")
Signed-off-by: Antonio Alvarez Feijoo <antonio.feijoo@suse.com>
Cc: stable@vger.kernel.org
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4e7d2a8f0b upstream.
There is a disconnect between the run_command function and the
wait_for_input. The wait_for_input has a default timeout of 2 minutes. But
if that happens, the run_command loop will exit out to the waitpid() of
the executing command. This fails in that it no longer monitors the
command, and also, the ssh to the test box can hang when its finished, as
it's waiting for the pipe it's writing to to flush, but the loop that
reads that pipe has already exited, leaving the command stuck, and the
test hangs.
Instead, make the default "wait_for_input" of the run_command infinite,
and allow the user to override it if they want with a default timeout
option "RUN_TIMEOUT".
But this fixes the hang that happens when the pipe is full and the ssh
session never exits.
Cc: stable@vger.kernel.org
Fixes: 6e98d1b441 ("ktest: Add timeout to ssh command")
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e8bf9b98d4 upstream.
In the "reboot" command, it does a check of the machine to see if it is
still alive with a simple "ssh echo" command. If it fails, it will assume
that a normal "ssh reboot" is not possible and force a power cycle.
In this case, the "start_monitor" is executed, but the "end_monitor" is
not, and this causes the screen will not be given back to the console. That
is, after the test, a "reset" command needs to be performed, as "echo" is
turned off.
Cc: stable@vger.kernel.org
Fixes: 6474ace999 ("ktest.pl: Powercycle the box on reboot if no connection can be made")
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 83d29d439c upstream.
When monitoring the console output, the stdout is being redirected to do
so. If Ctrl^C is hit during this mode, the stdout is not back to the
console, the user does not see anything they type (no echo).
Add "end_monitor" to the SIGINT interrupt handler to give back the console
on Ctrl^C.
Cc: stable@vger.kernel.org
Fixes: 9f2cdcbbb9 ("ktest: Give console process a dedicated tty")
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8677e555f1 upstream.
Update ptrace tests according to all potential Yama security policies.
This is required to make such tests pass even if Yama is enabled.
Tests are not skipped but they now check both Landlock and Yama boundary
restrictions at run time to keep a maximum test coverage (i.e. positive
and negative testing).
Signed-off-by: Jeff Xu <jeffxu@google.com>
Link: https://lore.kernel.org/r/20230114020306.1407195-2-jeffxu@google.com
Cc: stable@vger.kernel.org
[mic: Add curly braces around EXPECT_EQ() to make it build, and improve
commit message]
Co-developed-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 366617a69e upstream.
overlayfs may be disabled in the kernel configuration, causing related
tests to fail. Check that overlayfs is supported at runtime, so we can
skip layout2_overlay.* accordingly.
Signed-off-by: Jeff Xu <jeffxu@google.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230113053229.1281774-2-jeffxu@google.com
[mic: Reword comments and constify variables]
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 61f9fdcdcd ]
Need memory frequency quirk as Sapphire Rapids in Emerald Rapids.
So add Emerald Rapids CPU model check in is_spr_platform().
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
[srinivas.pandruvada@linux.intel.com: Subject, changelog and code edits]
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d5d4692472 ]
A lot of the tsan helpers are already excempt from the UACCESS warnings,
but some more functions were added that need the same thing:
kernel/kcsan/core.o: warning: objtool: __tsan_volatile_read16+0x0: call to __tsan_unaligned_read16() with UACCESS enabled
kernel/kcsan/core.o: warning: objtool: __tsan_volatile_write16+0x0: call to __tsan_unaligned_write16() with UACCESS enabled
vmlinux.o: warning: objtool: __tsan_unaligned_volatile_read16+0x4: call to __tsan_unaligned_read16() with UACCESS enabled
vmlinux.o: warning: objtool: __tsan_unaligned_volatile_write16+0x4: call to __tsan_unaligned_write16() with UACCESS enabled
As Marco points out, these functions don't even call each other
explicitly but instead gcc (but not clang) notices the functions
being identical and turns one symbol into a direct branch to the
other.
Link: https://lkml.kernel.org/r/20230215130058.3836177-4-arnd@kernel.org
Fixes: 75d75b7a4d ("kcsan: Support distinguishing volatile accesses")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1e6b485c92 ]
Since commit a1d6cd88c8 ("selftests/ftrace: event_triggers: wait
longer for test_event_enable") introduced bash specific "=="
comparation operator, that test will fail when we run it on a
posix-shell. `checkbashisms` warned it as below.
possible bashism in ftrace/func_event_triggers.tc line 45 (should be 'b = a'):
if [ "$e" == $val ]; then
This replaces it with "=".
Fixes: a1d6cd88c8 ("selftests/ftrace: event_triggers: wait longer for test_event_enable")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ffd1240e8f ]
On aarch64 CPU related events are not under event_source/devices/cpu/events,
they're under event_source/devices/armv8_pmuv3_0/events on my machine.
Using current auto-complete script will generate below error:
[root@localhost bin]# perf stat -e
ls: cannot access '/sys/bus/event_source/devices/cpu/events': No such file or directory
Fix this by not testing /sys/bus/event_source/devices/cpu/events on
aarch64 machine.
Fixes: 74cd5815d9 ("perf tool: Improve bash command line auto-complete for multiple events with comma")
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linuxarm@huawei.com
Cc: prime.zeng@hisilicon.com
Link: https://lore.kernel.org/r/20230207035057.43394-1-yangyicong@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aeb802f872 ]
When it processes AUXTRACE_INFO, it calls to auxtrace_queue_data() to
collect AUXTRACE data first. That won't work with pipe since it needs
lseek() to read the scattered aux data.
$ perf record -o- -e intel_pt// true | perf report -i- --itrace=i100
# To display the perf.data header info, please use --header/--header-only options.
#
0x4118 [0xa0]: failed to process type: 70
Error:
failed to process sample
For the pipe mode, it can handle the aux data as it gets. But there's
no guarantee it can get the aux data in time. So the following warning
will be shown at the beginning:
WARNING: Intel PT with pipe mode is not recommended.
The output cannot relied upon. In particular,
time stamps and the order of events may be incorrect.
Fixes: dbd134322e ("perf intel-pt: Add support for decoding AUX area samples")
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20230131023350.1903992-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
