Commit graph

369 commits

Author SHA1 Message Date
Mark Lord
9e58582449 pciehp: don't enable slot unless forced
This fixes a 2.6.25 regression reported by Alex Chiang.

Invoke pciehp_enable_slot() at startup only when pciehp_force=1.
Some HP equipment apparently cannot cope with it otherwise.

This restores the (previously working) 2.6.24 behaviour here,
while allowing machines that need a kick to use pciehp_force=1.

This was the original design back in October 2007,
but Kristen suggested we try without it first:

   Kristen Carlson Accardi wrote:
   >I think it would be ok to try allowing the slot to be enabled when not
   >using pciehp_force mode.  We can wrap it later if it proves to break things

This ended up breaking one of Alex's setups,
so it's time to put the wrapper back in now.

Signed-off-by: Mark Lord <mlord@pobox.com>
Acked-by: Alex Chiang <achiang@hp.com>
Acked-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-17 19:26:05 -07:00
Jesper Juhl
b91aac29bb PCI Hotplug: Fix small mem leak in IBM Hot Plug Controller Driver
In drivers/pci/hotplug/ibmphp_ebda.c::ebda_rsrc_controller(), storage is
allocated with kzalloc() and assigned to 'tmp_slot'.  Then lots of
stuff, like ->flag, ->supported_speed etc is set in tmp_slot.  A bit
further down there's then this test :

  if (!bus_info_ptr1) {
    rc = -ENODEV;
    goto error;
  }

At this point, tmp_slot has not been assigned to anything, so when
erroring-out we want to free it, but nothing at the 'error:' label
free's 'tmp_slot' - and we can't really free 'tmp_slot' at 'error:'
since we may jump to that label later when 'tmp_slot' *has* been used
and we do not want it freed. So, the only sane option left seems to be
to kfree(tmp_slot) just before jumping to the 'error:' label in the one
place where this is what actually makes sense. The following patch does
just that and thus kills off a tiny potential memory leak.


Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-10 16:38:02 -07:00
Kenji Kaneshige
c1ef5cbd03 pci: hotplug: pciehp: fix error code path in hpc_power_off_slot
Fix the error code path in hpc_power_off_slot().

The Bad DLLP Mask bit must be restored before return.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-04 15:07:04 -08:00
Sam Ravnborg
0ab2b57f8d PCI: fix section mismatch warning in pci_scan_child_bus
Fix following warning:
WARNING: vmlinux.o(.text+0x47bdb1): Section mismatch in reference from the function pci_scan_child_bus() to the function .devinit.text:pcibios_fixup_bus()

We had plenty of functions that could be annotated __devinit but due to
the former restriction that exported symbols could not be annotated
they were not so.  So annotate these function and fix the references
from the pci/hotplug/* code to silence the resuting warnings.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-04 15:07:03 -08:00
Yinghai Lu
6e4be1ff2e PCI: don't load acpi_php when acpi is disabled
When acpi=off and pci=nomsi, don't load acpiphp.

Fixes this:

pci_hotplug: PCI Hot Plug PCI Core version: 0.5
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
ACPI Exception (utmutex-0263): AE_BAD_PARAMETER, Thread
FFFF81103CC54000 could not acquire Mutex [1] [20070126]

[akpm@linux-foundation.org: export acpi_pci_disabled for acpiphp.ko]
[akpm@linux-foundation.org: fix return statement]
Signed-off-by: Yinghai Lu <yinghai.lu@sun.com>
Cc: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-21 15:34:37 -08:00
Gary Hade
498fbb5d41 PCI: hotplug: acpiphp_ibm: Remove get device information
drivers/pci/hotplug/acpiphp_ibm.c:ibm_find_acpi_device() is not
large enough to accommodate data returned by the _CID method
executed from acpi_get_object_info().

This patch eliminates the problem by letting ACPI code
(instead of driver code) determine and obtain a correctly
sized buffer.

Signed-off-by: Gary Hade <garyhade@us.ibm.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-21 15:34:35 -08:00
Ian Abbott
5c796ae7a7 PCI: Fix fakephp deadlock
If the fakephp driver is used to emulate removal of a PCI device by
writing text string "0" to the "power" sysfs attribute file, this causes
its parent directory and its contents (including the "power" file) to be
deleted before the write operation returns.  Unfortunately, it ends up
in a deadlock waiting for itself to complete.

The deadlock is as follows: sysfs_write_file calls flush_write_buffer
which calls sysfs_get_active_two before calling power_write_file in
pci_hotplug_core.c via the sysfs store operation. The power_write_file
function calls disable_slot in fakephp.c via the slot operation.  The
disable_slot function calls remove_slot which calls pci_hp_deregister
(back in pci_hotplug_core.c) which calls fs_remove_slot which calls
sysfs_remove_file to remove the "power" file. The sysfs_remove_file
function calls sysfs_hash_and_remove which calls sysfs_addrm_finish
which calls sysfs_deactivate. The sysfs_deactivate function sees that
something has an active reference on the sysfs_dirent (from the
previous call to sysfs_get_active_two back up the call stack somewhere)
so waits for the active reference to go away, which is of course
impossible.

The problem has been present since 2.6.21.

This patch breaks the deadlock by queuing work queue items on a single-
threaded work queue to remove a slot from sysfs, and to rescan the PCI
buses.  There is also some protection against disabling a slot that is
already being removed.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Cc: Kristen Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01 15:04:30 -08:00
Kenji Kaneshige
2326e2b999 pciehp: block new requests from the device before power off
Disable Bus Master, SERR# and INTx to ensure that no new Requests will
be generated from the device before turning power off, in accordance
with the specification.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01 15:04:28 -08:00
Kenji Kaneshige
f1050a35cd pciehp: workaround against Bad DLLP during power off
Set Bad DLLP Mask bit in Correctable Error Mask Register during
turning power off the slot.

This is the workaround against Bad DLLP error that sometimes happen
during turning power off on the slot which conforms to PCI Express
1.0a spec. The cause of this error seems that PCI Express 1.0a spec
doesn't have the following consideration that was added to PCI Express
1.1 spec.

    "If the port is associated with a hot-pluggable slot (Hot-Plug
    Capable bit in the Slot Capabilities register set to 1b), and
    Power Controller Control bit in Slot Control register is 1b(Off),
    then any transition to DL Inactive must not be considered an
    error."

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01 15:04:28 -08:00
Kenji Kaneshige
8bb7c7af1f pciehp: wait for 1000ms before LED operation after power off
After turning power off, we must wait for at least 1 second *before*
LED operation.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01 15:04:28 -08:00
Joe Perches
3609801ecc PCI: Spelling fixes
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01 15:04:26 -08:00
Rolf Eike Beer
f07234b66a PCI Hotplug: PCIeHP: Fix some whitespace damage
PCIeHP: Fix some whitespace damage

Signed-off-by: Rolf Eike Beer <eike-hotplug@sf-tec.de>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01 15:04:24 -08:00
Kenji Kaneshige
9515930ea2 PCI Hotplug: pciehp: use generic function to find ext capability
Remove duplicated code to find an extend capability in PCIEHP driver.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01 15:04:24 -08:00
Kenji Kaneshige
941f10e941 PCI Hotplug: pciehp: remove needless hp_slot calculation
Remove needless hp_slot calculation. This has no functional changes.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01 15:04:24 -08:00
Kenji Kaneshige
0837974ddb PCI Hotplug: pciehp: remove needless members from struct controller
Remove needless members from struct controller. This has no functional
changes.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01 15:04:24 -08:00
MUNEDA Takahiro
25d6ddcd78 PCI Hotplug: acpiphp: remove unneeded acpi_get_name function call
acpi_get_name() is called before and after dbg(). The latter is
useless and should be removed.

Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01 15:04:24 -08:00
MUNEDA Takahiro
5a340ed879 PCI Hotplug: acpiphp: fix trivial typos
fix trivial typos.

Signed-off-by: MUNEDA Takahiro <muneda.takahiro@jp.fujitsu.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01 15:04:23 -08:00
Mark Lord
ecdde93962 PCIe: fix double initialization bug
Earlier patches to split out the hardware init for PCIe hotplug resulted in
some one-time initializations being redone on every resume cycle.  Eg.
irq/polling initialization.

This patch splits the hardware init into two parts, and separates the
one-time initializations from those so that they only ever get done once,
as intended.

Signed-off-by: Mark Lord <mlord@pobox.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01 15:04:23 -08:00
Mark Lord
cd2fe83a81 PCIE: Make use of the previously split out pcie_init_enable_events() function
Make use of the previously split out pcie_init_enable_events() function
to reinitialize the hotplug hardware on resume from suspend, but only
when pciehp_force==1.  Otherwise behaviour is unmodified.

Signed-off-by: Mark Lord <mlord@pobox.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01 15:04:23 -08:00
Mark Lord
08e7a7d27d PCI: more fixes for PCIe Hotplug so that it works with ExpressCard slots on Dell notebooks (and others?) in conjunction with modparam of pciehp_force=1
Split out the hotplug hardware initialization code from pcie_init()
into pcie_init_enable_events(), without changing any functionality.

Signed-off-by: Mark Lord <mlord@pobox.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01 15:04:23 -08:00
Mark Lord
0a3c33d77f PCIE: fix PCIe Hotplug so that it works with ExpressCard slots on Dell notebooks (and others?) in conjunction with modparam of pciehp_force=1.
Fix pciehp_probe() to deal with ExpressCard cards
that were inserted prior to the driver being loaded.

Signed-off-by: Mark Lord <mlord@pobox.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01 15:04:22 -08:00
Joe Perches
a6f29a98af PCI: Add missing "space" in printk messages
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01 15:04:22 -08:00
Linas Vepstas
1b7c9fcaa1 pci hotplug: fix rpaphp directory naming
Fix presentation of the slot number in the /sys/bus/pci/slots
directory to match that used in the majority of other drivers.

> Greg said:
> How is anyone supposed to write sane managability tools in the
> presence
> of such anarchy?
>
> > ~ # cat /sys/bus/pci/slots/0000:00:02.2/phy_location
> > U787A.001.DNZ00Z5-P1-C2
>
> Right.  This should look like:
>
> # cat /sys/bus/pci/slots/U787A.001.DNZ00Z5-P1-C2/address
> 0000:00:02

This patch implements exactly what you describe. Boot tested.
I assume you really mean it -- if so, then please review and
ack the patch !?

I have absolutely no clue if this breaks any existing IBM tools.
I'm pretty sure it doesn't ... but attention Mike Strosaker! does it?

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Cc: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Cc: <strosake@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01 15:04:22 -08:00
Alex Chiang
561e55e8e3 PCI: hotplug: Link fakephp last
Currently, fakephp will claim all devices; we really only want it
to claim those not in slots.

Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01 15:04:20 -08:00
Alex Chiang
41ece3829f PCI: hotplug: pci_hotplug_core whitespace fix
Remove superfluous space.

Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01 15:04:20 -08:00
Alex Chiang
1d5b95ab8e PCI: hotplug: acpiphp: Remove unused variable from acpiphp
Remove unused variable from acpiphp.

Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01 15:04:20 -08:00
Kristen Carlson Accardi
1ec87280eb PCI: hotplug: remove Experimental
Remove EXPERIMENTAL from PCI Hot Plug.

Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01 15:04:19 -08:00
Joonwoo Park
f362b8bffe PCI: hotplug: Switch to pci_get_bus_and_slot
Thank you so much for your check & advise.
This time, I've tried on ibmphp_core.c, is it OK?

Signed-off-by: Joonwoo Park <joonwpark81@gmail.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01 15:04:19 -08:00
Paul Mackerras
bd45ac0c5d Merge branch 'linux-2.6' 2008-01-31 11:25:51 +11:00
Greg Kroah-Hartman
c10997f657 Kobject: convert drivers/* from kobject_unregister() to kobject_put()
There is no need for kobject_unregister() anymore, thanks to Kay's
kobject cleanup changes, so replace all instances of it with
kobject_put().


Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24 20:40:40 -08:00
Greg Kroah-Hartman
0fed80f7a6 driver core: add way to get to bus kset
This allows an easier way to get to the kset associated with a struct
bus_type (you have three to choose from...)  This will make it easier to
move these fields to be dynamic in a future patch.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24 20:40:33 -08:00
Greg Kroah-Hartman
64dbcac3a1 Kobject: change drivers/pci/hotplug/pci_hotplug_core.c to use kobject_init_and_add
Stop using kobject_register, as this way we can control the sending of
the uevent properly, after everything is properly initialized.

Cc: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24 20:40:28 -08:00
Greg Kroah-Hartman
f55842f232 kobject: clean up rpadlpar horrid sysfs abuse
rpadlpar pci hotplug driver was doing some pretty bad stuff with the
sysfs files.  This cleans up the logic to be sane and gets rid of the
gratuitous kset that is not needed for a simple directory like this.

Note, this patch is not even build tested, let alone run-time tested.
Someone with access to this hardware and can test would be greatly
appreciated.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: John Rose <johnrose@austin.ibm.com>
Cc: Badari Pulavarty <pbadari@gmail.com>
Cc: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24 20:40:24 -08:00
Greg Kroah-Hartman
81ace5cd8f kset: convert pci hotplug to use kset_create_and_add
This also renames pci_hotplug_slots_subsys to pcis_hotplug_slots_kset
catch all current users with a build error instead of a build warning
which can easily be missed.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24 20:40:14 -08:00
Greg Kroah-Hartman
3514faca19 kobject: remove struct kobj_type from struct kset
We don't need a "default" ktype for a kset.  We should set this
explicitly every time for each kset.  This change is needed so that we
can make ksets dynamic, and cleans up one of the odd, undocumented
assumption that the kset/kobject/ktype model has.

This patch is based on a lot of help from Kay Sievers.

Nasty bug in the block code was found by Dave Young
<hidave.darkstar@gmail.com>

Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Dave Young <hidave.darkstar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24 20:40:10 -08:00
Benjamin Herrenschmidt
bf5e2ba28f [POWERPC] Merge PCI resource fixups
The PCI code in 32 and 64 bits fixes up resources differently.

32 bits uses a header quirk plus handles bridges in pcibios_fixup_bus()
while 64 bits does things in various places depending on whether you
are using OF probing, using PCI hotplug, etc...

This merges those by basically using the 32 bits approach for both,
with various tweaks to make 64 bits work with the new approach.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-20 16:18:09 +11:00
Randy Dunlap
26e6c66e47 pci hotplug: kernel-doc fixes
acpiphp.h: not using kernel-doc, so change /** to /*
acpiphp_core.c: lots of kernel-doc cleanups
acpiphp_glue.c: lots of kernel-doc cleanups
acpiphp_ibm.c: lots of kernel-doc cleanups
cpqphp_core.c: lots of kernel-doc cleanups
cpqphp_ctrl.c: lots of kernel-doc cleanups
fakephp.c:  correct kernel-doc notation
pciehp_ctrl.c: correct kernel-doc notation
rpadlpar_core.c: correct function names & kernel-doc notation
rpaphp_core.c: correct kernel-doc notation
shpchp_ctrl.c: correct kernel-doc notation

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Kristen Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-11-28 14:35:26 -08:00
Jeff Garzik
bd3989e006 PCI: Add Kconfig option to disable deprecated pci_find_* API
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-11-05 13:35:17 -08:00
Adrian Bunk
0039541088 PCI Hotplug: cpqhp_pushbutton_thread(): remove a pointless if() check
The Coverity checker spotted that we'd have already oops'ed if "ctrl"
was NULL.

Additionally, "func" had just been checked for not being NULL.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-11-05 13:35:17 -08:00
Linus Torvalds
4271e0f7e1 Get rid of unused variable warning in drivers/pci/hotplug/pci_hotplug_core.c
Commit 5a7ad7f044 removed all uses of
'retval', but didn't remove the variable itself.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-15 09:07:58 -07:00
Linus Torvalds
6a84258e5f Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6: (37 commits)
  PCI: merge almost all of pci_32.h and pci_64.h together
  PCI: X86: Introduce and enable PCI domain support
  PCI: Add 'nodomains' boot option, and pci_domains_supported global
  PCI: modify PCI bridge control ISA flag for clarity
  PCI: use _CRS for PCI resource allocation
  PCI: avoid P2P prefetch window for expansion ROMs
  PCI: skip ISA ioresource alignment on some systems
  PCI: remove transparent bridge sizing
  pci: write file size to inode on proc bus file write
  pci: use size stored in proc_dir_entry for proc bus files
  pci: implement "pci=noaer"
  PCI: fix IDE legacy mode resources
  MSI: Use correct data offset for 32-bit MSI in read_msi_msg()
  PCI: Fix incorrect argument order to list_add_tail() in PCI dynamic ID code
  PCI: i386: Compaq EVO N800c needs PCI bus renumbering
  PCI: Remove no longer correct documentation regarding MSI vector assignment
  PCI: re-enable onboard sound on "MSI K8T Neo2-FIR"
  PCI: quirk_vt82c586_acpi: Omit reading PCI revision ID
  PCI: quirk amd_8131_mmrbc: Omit reading pci revision ID
  cpqphp: Use PCI_CLASS_REVISION instead of PCI_REVISION_ID for read
  ...
2007-10-12 15:50:23 -07:00
Auke Kok
3799a4e7d8 cpqphp: Use PCI_CLASS_REVISION instead of PCI_REVISION_ID for read
While PCI_CLASS_REVISION and PCI_REVISION_ID are identical, the
code here discards the revision content and is only interested in
the class number.

Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Cc: Krosten Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12 15:03:16 -07:00
Christoph Hellwig
fa007d8beb pci: hotplug: cpqphp: convert to kthread infrastructure
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12 15:03:15 -07:00
Kristen Carlson Accardi
2d100fe8f6 pci: hotplug: ibmphp: convert to kthread
Convert ibmphp to new kthread api

Signed-off-by:  Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12 15:03:15 -07:00
Kenji Kaneshige
40730d1042 pciehp: minor cleanups for pciehp_hpc.c
Minor cleanups for pciehp_hpc.c. The 80 column rules, removing
unnecessary lines, and so on.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12 15:03:15 -07:00
Kenji Kaneshige
9fe8164536 pciehp: remove trailing whitespace form pciehp_pci.c
Remove trailing whitespaces from pciehp_pci.c.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12 15:03:14 -07:00
Kenji Kaneshige
36ed27b07b pciehp: remove trailing whitespace from pciehp_ctrl.c
Remove trailing whitespaces from pciehp_ctrl.c.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12 15:03:14 -07:00
Kenji Kaneshige
a073a82674 pciehp: remove trailing whitespace from pciehp_core.c
Remove trailing whitespaces from pciehp_core.c.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12 15:03:14 -07:00
Kenji Kaneshige
71ad556dad pciehp: remove trailing whitespace from pciehp_hpc.c
Remove trailing whitespaces from pciehp_hpc.c.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12 15:03:14 -07:00
Kenji Kaneshige
c842648377 pciehp: remove DBG_XXX_ROUTINE
This patch removes DBG_ENTER_ROUTIN, DBG_LEAVE_ROUTINE and related
code, which seem no longer needed.

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12 15:03:14 -07:00