Commit graph

215 commits

Author SHA1 Message Date
David S. Miller
2198a10b50 Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
	net/core/dev.c
2010-10-21 08:43:05 -07:00
stephen hemminger
ff51bf8415 rds: make local functions/variables static
The RDS protocol has lots of functions that should be
declared static. rds_message_get/add_version_extension is
removed since it defined but never used.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21 04:26:39 -07:00
Linus Torvalds
799c10559d De-pessimize rds_page_copy_user
Don't try to "optimize" rds_page_copy_user() by using kmap_atomic() and
the unsafe atomic user mode accessor functions.  It's actually slower
than the straightforward code on any reasonable modern CPU.

Back when the code was written (although probably not by the time it was
actually merged, though), 32-bit x86 may have been the dominant
architecture.  And there kmap_atomic() can be a lot faster than kmap()
(unless you have very good locality, in which case the virtual address
caching by kmap() can overcome all the downsides).

But these days, x86-64 may not be more populous, but it's getting there
(and if you care about performance, it's definitely already there -
you'd have upgraded your CPU's already in the last few years).  And on
x86-64, the non-kmap_atomic() version is faster, simply because the code
is simpler and doesn't have the "re-try page fault" case.

People with old hardware are not likely to care about RDS anyway, and
the optimization for the 32-bit case is simply buggy, since it doesn't
verify the user addresses properly.

Reported-by: Dan Rosenberg <drosenberg@vsecurity.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-15 11:09:28 -07:00
David S. Miller
e40051d134 Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
	drivers/net/qlcnic/qlcnic_init.c
	net/ipv4/ip_output.c
2010-09-27 01:03:03 -07:00
Eric Dumazet
f064af1e50 net: fix a lockdep splat
We have for each socket :

One spinlock (sk_slock.slock)
One rwlock (sk_callback_lock)

Possible scenarios are :

(A) (this is used in net/sunrpc/xprtsock.c)
read_lock(&sk->sk_callback_lock) (without blocking BH)
<BH>
spin_lock(&sk->sk_slock.slock);
...
read_lock(&sk->sk_callback_lock);
...

(B)
write_lock_bh(&sk->sk_callback_lock)
stuff
write_unlock_bh(&sk->sk_callback_lock)

(C)
spin_lock_bh(&sk->sk_slock)
...
write_lock_bh(&sk->sk_callback_lock)
stuff
write_unlock_bh(&sk->sk_callback_lock)
spin_unlock_bh(&sk->sk_slock)

This (C) case conflicts with (A) :

CPU1 [A]                         CPU2 [C]
read_lock(callback_lock)
<BH>                             spin_lock_bh(slock)
<wait to spin_lock(slock)>
                                 <wait to write_lock_bh(callback_lock)>

We have one problematic (C) use case in inet_csk_listen_stop() :

local_bh_disable();
bh_lock_sock(child); // spin_lock_bh(&sk->sk_slock)
WARN_ON(sock_owned_by_user(child));
...
sock_orphan(child); // write_lock_bh(&sk->sk_callback_lock)

lockdep is not happy with this, as reported by Tetsuo Handa

It seems only way to deal with this is to use read_lock_bh(callbacklock)
everywhere.

Thanks to Jarek for pointing a bug in my first attempt and suggesting
this solution.

Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Tested-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
CC: Jarek Poplawski <jarkao2@gmail.com>
Tested-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-24 22:26:10 -07:00
Dan Carpenter
aef3ea33e8 rds: spin_lock_irq() is not nestable
This is basically just a cleanup.  IRQs were disabled on the previous
line so we don't need to do it again here.  In the current code IRQs
would get turned on one line earlier than intended.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-19 11:59:44 -07:00
Dan Carpenter
f4fa7f3807 rds: double unlock in rds_ib_cm_handle_connect()
We unlock after we goto out.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-19 11:59:44 -07:00
Dan Carpenter
9b9d2e00bf rds: signedness bug
In the original code if the copy_from_user() fails in rds_rdma_pages()
then the error handling fails and we get a stack trace from kmalloc().

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-19 11:59:43 -07:00
Andy Grover
20c72bd5f5 RDS: Implement masked atomic operations
Add two CMSGs for masked versions of cswp and fadd. args
struct modified to use a union for different atomic op type's
arguments. Change IB to do masked atomic ops. Atomic op type
in rds_message similarly unionized.

Signed-off-by: Andy Grover <andy.grover@oracle.com>
2010-09-08 18:16:51 -07:00
Zach Brown
59f740a6ae RDS/IB: print string constants in more places
This prints the constant identifier for work completion status and rdma
cm event types, like we already do for IB event types.

A core string array helper is added that each string type uses.

Signed-off-by: Zach Brown <zach.brown@oracle.com>
2010-09-08 18:16:50 -07:00
Zach Brown
4518071ac1 RDS: cancel connection work structs as we shut down
Nothing was canceling the send and receive work that might have been
queued as a conn was being destroyed.

Signed-off-by: Zach Brown <zach.brown@oracle.com>
2010-09-08 18:16:49 -07:00
Zach Brown
ffcec0e110 RDS: don't call rds_conn_shutdown() from rds_conn_destroy()
rds_conn_shutdown() can return before the connection is shut down when
it encounters an existing state that it doesn't understand.  This lets
rds_conn_destroy() then start tearing down the conn from under paths
that are still using it.

It's more reliable the shutdown work and wait for krdsd to complete the
shutdown callback.  This stopped some hangs I was seeing where krdsd was
trying to shut down a freed conn.

Signed-off-by: Zach Brown <zach.brown@oracle.com>
2010-09-08 18:16:48 -07:00
Zach Brown
5adb5bc65f RDS: have sockets get transport module references
Right now there's nothing to stop the various paths that use
rs->rs_transport from racing with rmmod and executing freed transport
code.  The simple fix is to have binding to a transport also hold a
reference to the transport's module, removing this class of races.

We already had an unused t_owner field which was set for the modular
transports and which wasn't set for the built-in loop transport.

Signed-off-by: Zach Brown <zach.brown@oracle.com>
2010-09-08 18:16:47 -07:00
Zach Brown
77510481c0 RDS: remove old rs_transport comment
rs_transport is now also used by the rdma paths once the socket is
bound.  We don't need this stale comment to tell us what cscope can.

Signed-off-by: Zach Brown <zach.brown@oracle.com>
2010-09-08 18:16:46 -07:00
Zach Brown
fe8ff6b58f RDS: lock rds_conn_count decrement in rds_conn_destroy()
rds_conn_destroy() can race with all other modifications of the
rds_conn_count but it was modifying the count without locking.

Signed-off-by: Zach Brown <zach.brown@oracle.com>
2010-09-08 18:16:45 -07:00
Zach Brown
ea819867b7 RDS/IB: protect the list of IB devices
The RDS IB device list wasn't protected by any locking.  Traversal in
both the get_mr and FMR flushing paths could race with additon and
removal.

List manipulation is done with RCU primatives and is protected by the
write side of a rwsem.  The list traversal in the get_mr fast path is
protected by a rcu read critical section.  The FMR list traversal is
more problematic because it can block while traversing the list.  We
protect this with the read side of the rwsem.

Signed-off-by: Zach Brown <zach.brown@oracle.com>
2010-09-08 18:16:44 -07:00
Zach Brown
1bde04a63d RDS/IB: print IB event strings as well as their number
It's nice to not have to go digging in the code to see which event
occurred.  It's easy to throw together a quick array that maps the ib
event enums to their strings.  I didn't see anything in the stack that
does this translation for us, but I also didn't look very hard.

Signed-off-by: Zach Brown <zach.brown@oracle.com>
2010-09-08 18:16:43 -07:00
Chris Mason
8576f374ac RDS: flush fmrs before allocating new ones
Flushing FMRs is somewhat expensive, and is currently kicked off when
the interrupt handler notices that we are getting low.  The result of
this is that FMR flushing only happens from the interrupt cpus.

This spreads the load more effectively by triggering flushes just before
we allocate a new FMR.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-09-08 18:16:42 -07:00
Chris Mason
b4e1da3c9a RDS: properly use sg_init_table
This is only needed to keep debugging code from bugging.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-09-08 18:16:41 -07:00
Zach Brown
f046011cd7 RDS/IB: track signaled sends
We're seeing bugs today where IB connection shutdown clears the send
ring while the tasklet is processing completed sends.  Implementation
details cause this to dereference a null pointer.  Shutdown needs to
wait for send completion to stop before tearing down the connection.  We
can't simply wait for the ring to empty because it may contain
unsignaled sends that will never be processed.

This patch tracks the number of signaled sends that we've posted and
waits for them to complete.  It also makes sure that the tasklet has
finished executing.

Signed-off-by: Zach Brown <zach.brown@oracle.com>
2010-09-08 18:16:40 -07:00
Zach Brown
ef87b7ea39 RDS: remove __init and __exit annotation
The trivial amount of memory saved isn't worth the cost of dealing with section
mismatches.

Signed-off-by: Zach Brown <zach.brown@oracle.com>
2010-09-08 18:16:39 -07:00
Andy Grover
c20f5b9633 RDS/IB: Use SLAB_HWCACHE_ALIGN flag for kmem_cache_create()
We are *definitely* counting cycles as closely as DaveM, so
ensure hwcache alignment for our recv ring control structs.

Signed-off-by: Andy Grover <andy.grover@oracle.com>
2010-09-08 18:16:38 -07:00
Zach Brown
d455ab6409 RDS/IB: always process recv completions
The recv refill path was leaking fragments because the recv event handler had
marked a ring element as free without freeing its frag.  This was happening
because it wasn't processing receives when the conn wasn't marked up or
connecting, as can be the case if it races with rmmod.

Two observations support always processing receives in the callback.

First, buildup should only post receives, thus triggering recv event handler
calls, once it has built up all the state to handle them.  Teardown should
destroy the CQ and drain the ring before tearing down the state needed to
process recvs.  Both appear to be true today.

Second, this test was fundamentally racy.  There is nothing to stop rmmod and
connection destruction from swooping in the moment after the conn state was
sampled but before real receive procesing starts.

Signed-off-by: Zach Brown <zach.brown@oracle.com>
2010-09-08 18:16:36 -07:00
Zach Brown
80c51be56f RDS: return to a single-threaded krdsd
We were seeing very nasty bugs due to fundamental assumption the current code
makes about concurrent work struct processing.  The code simpy isn't able to
handle concurrent connection shutdown work function execution today, for
example, which is very much possible once a multi-threaded krdsd was
introduced.  The problem compounds as additional work structs are added to the
mix.

krdsd is no longer perforance critical now that send and receive posting and
FMR flushing are done elsewhere, so the safest fix is to move back to the
single threaded krdsd that the current code was built around.

Signed-off-by: Zach Brown <zach.brown@oracle.com>
2010-09-08 18:16:35 -07:00
Zach Brown
515e079dab RDS/IB: create a work queue for FMR flushing
This patch moves the FMR flushing work in to its own mult-threaded work queue.
This is to maintain performance in preparation for returning the main krdsd
work queue back to a single threaded work queue to avoid deep-rooted
concurrency bugs.

This is also good because it further separates FMRs, which might be removed
some day, from the rest of the code base.

Signed-off-by: Zach Brown <zach.brown@oracle.com>
2010-09-08 18:16:34 -07:00
Zach Brown
8aeb1ba663 RDS/IB: destroy connections on rmmod
IB connections were not being destroyed during rmmod.

First, recently IB device removal callback was changed to disconnect
connections that used the removing device rather than destroying them.  So
connections with devices during rmmod were not being destroyed.

Second, rds_ib_destroy_nodev_conns() was being called before connections are
disassociated with devices.  It would almost never find connections in the
nodev list.

We first get rid of rds_ib_destroy_conns(), which is no longer called, and
refactor the existing caller into the main body of the function and get rid of
the list and lock wrappers.

Then we call rds_ib_destroy_nodev_conns() *after* ib_unregister_client() has
removed the IB device from all the conns and put the conns on the nodev list.

The result is that IB connections are destroyed by rmmod.

Signed-off-by: Zach Brown <zach.brown@oracle.com>
2010-09-08 18:16:33 -07:00
Zach Brown
24fa163a4b RDS/IB: wait for IB dev freeing work to finish during rmmod
The RDS IB client removal callback can queue work to drop the final reference
to an IB device.  We have to make sure that this function has returned before
we complete rmmod or the work threads can try to execute freed code.

Signed-off-by: Zach Brown <zach.brown@oracle.com>
2010-09-08 18:16:32 -07:00
Andy Grover
b6fb0df12d RDS/IB: Make ib_recv_refill return void
Signed-off-by: Andy Grover <andy.grover@oracle.com>
2010-09-08 18:16:31 -07:00
Andy Grover
fbf4d7e3d0 RDS: Remove unused XLIST_PTR_TAIL and xlist_protect()
Not used.

Signed-off-by: Andy Grover <andy.grover@oracle.com>
2010-09-08 18:16:06 -07:00
Andy Grover
c9455d9996 RDS: whitespace 2010-09-08 18:15:32 -07:00
Chris Mason
7a0ff5dbdd RDS: use delayed work for the FMR flushes
Using a delayed work queue helps us make sure a healthy number of FMRs
have queued up over the limit.  It makes for a large improvement in RDMA
iops.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-09-08 18:15:30 -07:00
Chris Mason
eabb732279 rds: more FMRs are faster
When we add more FMRs, we flush them less often and so we go faster.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-09-08 18:15:29 -07:00
Chris Mason
6fa70da608 rds: recycle FMRs through lockless lists
FRM allocation and recycling is performance critical and fairly lock
intensive.  The current code has a per connection lock that all
processes bang on and it becomes a major bottleneck on large systems.

This changes things to use a number of cmpxchg based lists instead,
allowing us to go through the whole FMR lifecycle without locking inside
RDS.

Zach Brown pointed out that our usage of cmpxchg for xlist removal is
racey if someone manages to remove and add back an FMR struct into the list
while another CPU can see the FMR's address at the head of the list.

The second CPU might assume the list hasn't changed when in fact any
number of operations might have happened in between the deletion and
reinsertion.

This commit maintains a per cpu count of CPUs that are currently
in xlist removal, and establishes a grace period to make sure that
nobody can see an entry we have just removed from the list.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-09-08 18:15:28 -07:00
Zach Brown
0f4b1c7e89 rds: fix rds_send_xmit() serialization
rds_send_xmit() was changed to hold an interrupt masking spinlock instead of a
mutex so that it could be called from the IB receive tasklet path.  This broke
the TCP transport because its xmit method can block and masks and unmasks
interrupts.

This patch serializes callers to rds_send_xmit() with a simple bit instead of
the current spinlock or previous mutex.  This enables rds_send_xmit() to be
called from any context and to call functions which block.  Getting rid of the
c_send_lock exposes the bare c_lock acquisitions which are changed to block
interrupts.

A waitqueue is added so that rds_conn_shutdown() can wait for callers to leave
rds_send_xmit() before tearing down partial send state.  This lets us get rid
of c_senders.

rds_send_xmit() is changed to check the conn state after acquiring the
RDS_IN_XMIT bit to resolve races with the shutdown path.  Previously both
worked with the conn state and then the lock in the same order, allowing them
to race and execute the paths concurrently.

rds_send_reset() isn't racing with rds_send_xmit() now that rds_conn_shutdown()
properly ensures that rds_send_xmit() can't start once the conn state has been
changed.  We can remove its previous use of the spinlock.

Finally, c_send_generation is redundant.  Callers can race to test the c_flags
bit by simply retrying instead of racing to test the c_send_generation atomic.

Signed-off-by: Zach Brown <zach.brown@oracle.com>
2010-09-08 18:15:27 -07:00
Zach Brown
501dcccdb7 rds: block ints when acquiring c_lock in rds_conn_message_info()
conn->c_lock is acquired in interrupt context.  rds_conn_message_info() is
called from user context and was acquiring c_lock without blocking interrupts,
leading to possible deadlocks.

Signed-off-by: Zach Brown <zach.brown@oracle.com>
2010-09-08 18:15:26 -07:00
Zach Brown
671202f349 rds: remove unused rds_send_acked_before()
rds_send_acked_before() wasn't blocking interrupts when acquiring c_lock from
user context but nothing calls it.  Rather than fix its use of c_lock we just
remove the function.

Signed-off-by: Zach Brown <zach.brown@oracle.com>
2010-09-08 18:15:25 -07:00
Chris Mason
037f18a307 RDS: use friendly gfp masks for prefill
When prefilling the rds frags, we end up doing a lot of allocations.
We're not in atomic context here, and so there's no reason to dip into
atomic reserves.  This changes the prefills to use masks that allow
waiting.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-09-08 18:15:24 -07:00
Chris Mason
3324412587 RDS/IB: Add caching of frags and incs
This patch is based heavily on an initial patch by Chris Mason.
Instead of freeing slab memory and pages, it keeps them, and
funnels them back to be reused.

The lock minimization strategy uses xchg and cmpxchg atomic ops
for manipulation of pointers to list heads. We anchor the lists with a
pointer to a list_head struct instead of a static list_head struct.
We just have to carefully use the existing primitives with
the difference between a pointer and a static head struct.

For example, 'list_empty()' means that our anchor pointer points to a list with
a single item instead of meaning that our static head element doesn't point to
any list items.

Original patch by Chris, with significant mods and fixes by Andy and Zach.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
Signed-off-by: Andy Grover <andy.grover@oracle.com>
Signed-off-by: Zach Brown <zach.brown@oracle.com>
2010-09-08 18:15:23 -07:00
Andy Grover
fc24f78085 RDS/IB: Remove ib_recv_unmap_page()
All it does is call unmap_sg(), so just call that directly.

The comment above unmap_page also may be incorrect, so we
shouldn't hold on to it, either.

Signed-off-by: Andy Grover <andy.grover@oracle.com>
2010-09-08 18:15:22 -07:00
Andy Grover
3427e854e1 RDS: Assume recv->r_frag is always NULL in refill_one()
refill_one() should never be called on a recv struct that
doesn't need a new r_frag allocated. Add a WARN and remove
conditional around r_frag alloc code.

Also, add a comment to explain why r_ibinc may or may not
need refilling.

Signed-off-by: Andy Grover <andy.grover@oracle.com>
2010-09-08 18:15:21 -07:00
Andy Grover
0b088e003c RDS: Use page_remainder_alloc() for recv bufs
Instead of splitting up a page into RDS_FRAG_SIZE chunks
ourselves, ask rds_page_remainder_alloc() to do it. While it
is possible PAGE_SIZE > FRAG_SIZE, on x86en it isn't, so having
duplicate "carve up a page into buffers" code seems excessive.

The other modification this spawns is the use of a single
struct scatterlist in rds_page_frag instead of a bare page ptr.
This causes verbosity to increase in some places, and decrease
in others.

Finally, I decided to unify the lifetimes and alloc/free of
rds_page_frag and its page. This is a nice simplification in itself,
but will be extra-nice once we come to adding cmason's recycling
patch.

Signed-off-by: Andy Grover <andy.grover@oracle.com>
2010-09-08 18:15:20 -07:00
Zach Brown
fc19de38be RDS/IB: disconnect when IB devices are removed
Currently IB device removal destroys connections which are associated with the
device.  This prevents connections from being re-established when replacement
devices are added.

Instead we'll queue shutdown work on the connections as their devices are
removed.  When we see that devices are added we triger connection attempts on
all connections that don't currently have a device.

The result is that RDS sockets can resume device-independent work (bcopy, not
RDMA) across IB device removal and restoration.

Signed-off-by: Zach Brown <zach.brown@oracle.com>
2010-09-08 18:15:19 -07:00
Zach Brown
f3c6808d3d RDS: introduce rds_conn_connect_if_down()
A few paths had the same block of code to queue a connection's connect work if
it was in the right state.  Let's move this in to a helper function.

Signed-off-by: Zach Brown <zach.brown@oracle.com>
2010-09-08 18:15:18 -07:00
Zach Brown
3e0249f9c0 RDS/IB: add refcount tracking to struct rds_ib_device
The RDS IB client .remove callback used to free the rds_ibdev for the given
device unconditionally.  This could race other users of the struct.  This patch
adds refcounting so that we only free the rds_ibdev once all of its users are
done.

Many rds_ibdev users are tied to connections.  We give the connection a
reference and change these users to reference the device in the connection
instead of looking it up in the IB client data.  The only user of the IB client
data remaining is the first lookup of the device as connections are built up.

Incrementing the reference count of a device found in the IB client data could
race with final freeing so we use an RCU grace period to make sure that freeing
won't happen until those lookups are done.

MRs need the rds_ibdev to get at the pool that they're freed in to.  They exist
outside a connection and many MRs can reference different devices from one
socket, so it was natural to have each MR hold a reference.  MR refs can be
dropped from interrupt handlers and final device teardown can block so we push
it off to a work struct.  Pool teardown had to be fixed to cancel its pending
work instead of deadlocking waiting for all queued work, including itself, to
finish.

MRs get their reference from the global device list, which gets a reference.
It is left unprotected by locks and remains racy.  A simple global lock would
be a significant bottleneck.  More scalable (complicated) locking should be
done carefully in a later patch.

Signed-off-by: Zach Brown <zach.brown@oracle.com>
2010-09-08 18:15:17 -07:00
Zach Brown
89bf9d4158 RDS/IB: get the xmit max_sge from the RDS IB device on the connection
rds_ib_xmit_rdma() was calling ib_get_client_data() to get at the rds_ibdevice
just to get the max_sge for the transmit.  This patch instead has it get it
directly off the rds_ibdev which is stored on the connection.

The current code won't free the rds_ibdev until all the IB connections that use
it are freed.  So it's safe to reference the rds_ibdev this way.  In the future
it also makes it easier to support proper reference counting of the rds_ibdev
struct.

As an additional bonus, this gets rid of the performance hit of calling in to
the IB stack to look up the rds_ibdev.  The current implementation in the IB
stack acquires an interrupt blocking spinlock to protect the registration of
client callback data.

Signed-off-by: Zach Brown <zach.brown@oracle.com>
2010-09-08 18:15:16 -07:00
Zach Brown
a46ca94e7f RDS/IB: rds_ib_cm_handle_connect() forgot to unlock c_cm_lock
rds_ib_cm_handle_connect() could return without unlocking the c_conn_lock if
rds_setup_qp() failed.  Rather than adding another imbalanced mutex_unlock() to
this error path we only unlock the mutex once as we exit the function, reducing
the likelyhood of making this same mistake in the future.  We remove the
previous mulitple return sites, leaving one unambigious return path.

Signed-off-by: Zach Brown <zach.brown@oracle.com>
2010-09-08 18:15:15 -07:00
Chris Mason
1cc2228c59 rds: Fix reference counting on the for xmit_atomic and xmit_rdma
This makes sure we have the proper number of references in
rds_ib_xmit_atomic and rds_ib_xmit_rdma.  We also consistently
drop references the same way for all message types as the IOs end.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-09-08 18:15:13 -07:00
Chris Mason
bcf50ef2ce rds: use RCU to protect the connection hash
The connection hash was almost entirely RCU ready, this
just makes the final couple of changes to use RCU instead
of spinlocks for everything.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-09-08 18:15:12 -07:00
Chris Mason
abf454398c RDS: use locking on the connection hash list
rds_conn_destroy really needs locking while it changes the
connection hash.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-09-08 18:15:11 -07:00
Chris Mason
c9e65383a2 rds: Fix RDMA message reference counting
The RDS send_xmit code was trying to get fancy with message
counting and was dropping the final reference on the RDMA messages
too early.  This resulted in memory corruption and oopsen.

The fix here is to always add a ref as the parts of the message passes
through rds_send_xmit, and always drop a ref as the parts of the message
go through completion handling.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-09-08 18:15:10 -07:00