Commit graph

108 commits

Author SHA1 Message Date
Takashi Iwai
c77a6edb6d ALSA: x86: Fix potential crash at error path
When LPE audio driver gets some error at probing, it may lead to a
crash because of canceling the pending work in hdmi_lpe_audio_free(),
since some of ports might be still not initialized.

For assuring the proper free of each port, initialize all ports at the
beginning of the probe.

Fixes: b4eb0d522f ("ALSA: x86: Split snd_intelhad into card and PCM specific structures")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-02-28 08:46:00 +01:00
Takashi Iwai
350144069a ALSA: x86: Fix missing spinlock and mutex initializations
The commit change for supporting the multiple ports moved involved
some code shuffling, and there the initializations of spinlock and
mutex in snd_intelhad object were dropped mistakenly.

This patch adds the missing initializations again for each port.

Fixes: b4eb0d522f ("ALSA: x86: Split snd_intelhad into card and PCM specific structures")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-02-28 08:40:26 +01:00
Takashi Iwai
7229b12f5d ALSA: x86: hdmi: Add single_port option for compatible behavior
The recent support for the multiple PCM devices allowed user to use
multiple HDMI/DP outputs, but at the same time, the PCM stream
assignment has been changed, too.  Due to that, the former PCM#0
(there was only one stream in the past) is likely assigned to a
different one (e.g. PCM#2), and it ends up with the regression when
user sticks with the fixed configuration using the device#0.

Although the multiple monitor support shouldn't matter when user
deploys the backend like PulseAudio that checks the jack detection
state, the behavior change isn't always acceptable for some users.

As a mitigation, this patch introduces an option to switch the
behavior back to the old-good-days: when the new option,
single_port=1, is passed, the driver creates only a single PCM device,
and it's assigned to the first connected one, like the earlier
versions did.  The option is turned off as default still to support
the multiple monitors.

Fixes: 8a2d6ae1f7 ("ALSA: x86: Register multiple PCM devices for the LPE audio card")
Reported-and-tested-by: Hubert Mantel <mantel@metadox.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-02-22 11:51:36 +01:00
Linus Torvalds
af3c8d9850 main drm pull for v4.13
-----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJZYseIAAoJEAx081l5xIa+85kP/0zKzKKVzZXSXG2TAGb5jNfk
 Ex+TELG8tWk9KBxA7lEE5c0WEsnP79cNoXZLQu8wlUzO8+kwQK5Bz0zgNUkpSuo1
 RthwdsxBQX1++UxB+HoSG+dOa7hkKVqlgQR3z9qyhsBXzetkJV0DoYcpMV0A1EWd
 6Jzt+AvCShVkcW+21LqHPlc5EIVewrDMoA3oU6aYCLhyAOUTVvvQB2ML8YApH7TM
 JrSrzCFHTrQEBbGUrZQhzR0sZzZzk9byntb/I/mdVbHeCyIHiL8sC4PfWSOyyazm
 GkPnA8G3aFAY9haBRz9jG/VBr1yVb0mCBjkWQ1lGfIAOCDDSc+d7PDXdG+i4AewK
 jZheXlrDIdGgmJLy4W3rdEqJvdf7UQHZOs8594OL19l4+FxCTrol1JSHSMeavCvr
 8bUNil9Jb/ONU/wmp+q55U0k4TCTyerUA7gKnuaJAwBvd4n78/PKmQnbrWinDyJc
 GQXp6zESk9bKt5DXSnVZuVf4POTzpuAsQkkfX1V2y145EHTQYfS3jLENWqEjyZUy
 QtKCHZvRkJfGaFU4Pr+vBo9Iu1GlA5OiOv08QadldTT4OxUI0T6yaLDobHCQfKPE
 sc3wCuCM+/dAnqoKDcGC4hAmF8zDdO0kw65P2m7uC6T9Jm1G35CioKbzo+fzUhuL
 fg5TBpbp2Wwe2oPA5iBm
 =2S5N
 -----END PGP SIGNATURE-----

Merge tag 'drm-for-v4.13' of git://people.freedesktop.org/~airlied/linux

Pull drm updates from Dave Airlie:
 "This is the main pull request for the drm, I think I've got one later
  driver pull for mediatek SoC driver, I'm undecided on if it needs to
  go to you yet.

  Otherwise summary below:

  Core drm:
   - Atomic add driver private objects
   - Deprecate preclose hook in modern drivers
   - MST bandwidth tracking
   - Use kvmalloc in more places
   - Add mode_valid hook for crtc/encoder/bridge
   - Reduce sync_file construction time
   - Documentation updates
   - New DRM synchronisation object support

  New drivers:
   - pl111 - pl111 CLCD display controller

  Panel:
   - Innolux P079ZCA panel driver
   - Add NL12880B20-05, NL192108AC18-02D, P320HVN03 panels
   - panel-samsung-s6e3ha2: Add s6e3hf2 panel support

  i915:
   - SKL+ watermark fixes
   - G4x/G33 reset improvements
   - DP AUX backlight improvements
   - Buffer based GuC/host communication
   - New getparam for (sub)slice infomation
   - Cannonlake and Coffeelake initial patches
   - Execbuf optimisations

  radeon/amdgpu:
   - Lots of Vega10 bug fixes
   - Preliminary raven support
   - KIQ support for compute rings
   - MEC queue management rework
   - DCE6 Audio support
   - SR-IOV improvements
   - Better radeon/amdgpu selection support

  nouveau:
   - HDMI stereoscopic support
   - Display code rework for >= GM20x GPUs

  msm:
   - GEM rework for fine-grained locking
   - Per-process pagetable work
   - HDMI fixes for Snapdragon 820.

  vc4:
   - Remove 256MB CMA limit from vc4
   - Add out-fence support
   - Add support for cygnus
   - Get/set tiling ioctls support
   - Add T-format tiling support for scanout

  zte:
   - add VGA support.

  etnaviv:
   - Thermal throttle support for newer GPUs
   - Restore userspace buffer cache performance
   - dma-buf sync fix

  stm:
   - add stm32f429 display support

  exynos:
   - Rework vblank handling
   - Fixup sw-trigger code

  sun4i:
   - V3s display engine support
   - HDMI support for older SoCs
   - Preliminary work on dual-pipeline SoCs.

  rcar-du:
   - VSP work

  imx-drm:
   - Remove counter load enable from PRE
   - Double read/write reduction flag support

  tegra:
   - Documentation for the host1x and drm driver.
   - Lots of staging ioctl fixes due to grate project work.

  omapdrm:
   - dma-buf fence support
   - TILER rotation fixes"

* tag 'drm-for-v4.13' of git://people.freedesktop.org/~airlied/linux: (1270 commits)
  drm: Remove unused drm_file parameter to drm_syncobj_replace_fence()
  drm/amd/powerplay: fix bug fail to remove sysfs when rmmod amdgpu.
  amdgpu: Set cik/si_support to 1 by default if radeon isn't built
  drm/amdgpu/gfx9: fix driver reload with KIQ
  drm/amdgpu/gfx8: fix driver reload with KIQ
  drm/amdgpu: Don't call amd_powerplay_destroy() if we don't have powerplay
  drm/ttm: Fix use-after-free in ttm_bo_clean_mm
  drm/amd/amdgpu: move get memory type function from early init to sw init
  drm/amdgpu/cgs: always set reference clock in mode_info
  drm/amdgpu: fix vblank_time when displays are off
  drm/amd/powerplay: power value format change for Vega10
  drm/amdgpu/gfx9: support the amdgpu.disable_cu option
  drm/amd/powerplay: change PPSMC_MSG_GetCurrPkgPwr for Vega10
  drm/amdgpu: Make amdgpu_cs_parser_init static (v2)
  drm/amdgpu/cs: fix a typo in a comment
  drm/amdgpu: Fix the exported always on CU bitmap
  drm/amdgpu/gfx9: gfx_v9_0_enable_gfx_static_mg_power_gating() can be static
  drm/amdgpu/psp: upper_32_bits/lower_32_bits for address setup
  drm/amd/powerplay/cz: print message if smc message fails
  drm/amdgpu: fix typo in amdgpu_debugfs_test_ib_init
  ...
2017-07-09 18:48:37 -07:00
Gustavo A. R. Silva
1967158fff ALSA: x86: fix error return code in hdmi_lpe_audio_probe()
platform_get_irq() returns an error code, but the intel_hdmi_audio
driver ignores it and always returns -ENODEV. This is not correct,
and prevents -EPROBE_DEFER from being propagated properly. Also,
notice that platform_get_irq() no longer returns 0 on error.

Print error message and propagate the return value of platform_get_irq
on failure.

Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-06-30 22:38:18 +02:00
Dave Airlie
a82256bc02 Merge tag 'drm-intel-next-2017-05-29' of git://anongit.freedesktop.org/git/drm-intel into drm-next
More stuff for 4.13:

- skl+ wm fixes from Mahesh Kumar
- some refactor and tests for i915_sw_fence (Chris)
- tune execlist/scheduler code (Chris)
- g4x,g33 gpu reset improvements (Chris, Mika)
- guc code cleanup (Michal Wajdeczko, Michał Winiarski)
- dp aux backlight improvements (Puthikorn Voravootivat)
- buffer based guc/host communication (Michal Wajdeczko)

* tag 'drm-intel-next-2017-05-29' of git://anongit.freedesktop.org/git/drm-intel: (253 commits)
  drm/i915: Update DRIVER_DATE to 20170529
  drm/i915: Keep the forcewake timer alive for 1ms past the most recent use
  drm/i915/guc: capture GuC logs if FW fails to load
  drm/i915/guc: Introduce buffer based cmd transport
  drm/i915/guc: Disable send function on fini
  drm: Add definition for eDP backlight frequency
  drm/i915: Drop AUX backlight enable check for backlight control
  drm/i915: Consolidate #ifdef CONFIG_INTEL_IOMMU
  drm/i915: Only GGTT vma may be pinned and prevent shrinking
  drm/i915: Serialize GTT/Aperture accesses on BXT
  drm/i915: Convert i915_gem_object_ops->flags values to use BIT()
  drm/i915/selftests: Silence compiler warning in igt_ctx_exec
  drm/i915/guc: Skip port assign on first iteration of GuC dequeue
  drm/i915: Remove misleading comment in request_alloc
  drm/i915/g33: Improve reset reliability
  Revert "drm/i915: Restore lost "Initialized i915" welcome message"
  drm/i915/huc: Update GLK HuC version
  drm/i915: Check for allocation failure
  drm/i915/guc: Remove action status and statistics from debugfs
  drm/i915/g4x: Improve gpu reset reliability
  ...
2017-05-30 15:25:28 +10:00
Ville Syrjälä
668e3b014a drm/i915: Fix runtime PM for LPE audio
Not calling pm_runtime_enable() means that runtime PM can't be
enabled at all via sysfs. So we definitely need to call it
from somewhere.

Calling it from the driver seems like a bad idea because it
would have to be paired with a pm_runtime_disable() at driver
unload time, otherwise the core gets upset. Also if there's
no LPE audio driver loaded then we couldn't runtime suspend
i915 either.

So it looks like a better plan is to call it from i915 when
we register the platform device. That seems to match how
pci generally does things. I cargo culted the
pm_runtime_forbid() and pm_runtime_set_active() calls from
pci as well.

The exposed runtime PM API is massive an thorougly misleading, so
I don't actually know if this is how you're supposed to use the API
or not. But it seems to work. I can now runtime suspend i915 again
with or without the LPE audio driver loaded, and reloading the
LPE audio driver also seems to work.

Note that powertop won't auto-tune runtime PM for platform devices,
which is a little annoying. So I'm not sure that leaving runtime
PM in "on" mode by default is the best choice here. But I've left
it like that for now at least.

Also remove the comment about there not being much benefit from
LPE audio runtime PM. Not allowing runtime PM blocks i915 runtime
PM, which will also block s0ix, and that could have a measurable
impact on power consumption.

Cc: stable@vger.kernel.org
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Fixes: 0b6b524f39 ("ALSA: x86: Don't enable runtime PM as default")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170427160231.13337-2-ville.syrjala@linux.intel.com
Reviewed-by: Takashi Iwai <tiwai@suse.de>
(cherry picked from commit 183c00350c)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2017-05-15 14:44:11 +03:00
Laura Abbott
7f80f51358 alsa: use set_memory.h header
set_memory_* functions have moved to set_memory.h.  Switch to this
explicitly.

Link: http://lkml.kernel.org/r/1488920133-27229-14-git-send-email-labbott@redhat.com
Signed-off-by: Laura Abbott <labbott@redhat.com>
Acked-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-08 17:15:14 -07:00
Ville Syrjälä
8a2d6ae1f7 ALSA: x86: Register multiple PCM devices for the LPE audio card
Now that everything is in place let's register a PCM device for
each port of the display engine. This will make it possible to
actually output audio to multiple displays at the same time. And
it avoids modesets on unrelated displays from clobbering up the
ELD and whatnot for the display currently doing the playback.

v2: Add a PCM per port instead of per pipe
v3: Fix off by one error with port numbers (Pierre-Louis)
    Fix .notify_audio_lpe() prototype (Pierre-Louis)

Cc: Takashi Iwai <tiwai@suse.de>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170427160231.13337-12-ville.syrjala@linux.intel.com
Reviewed-by: Takashi Iwai <tiwai@suse.de>
2017-05-03 16:24:00 +03:00
Ville Syrjälä
b4eb0d522f ALSA: x86: Split snd_intelhad into card and PCM specific structures
To allow multiple PCM devices to be registered for the LPE audio card,
split the private data into card and PCM specific chunks. For now we'll
stick to just one PCM device as before.

v2: Rework to do a pcm device per port instead of per pipe

Cc: Takashi Iwai <tiwai@suse.de>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170427160231.13337-11-ville.syrjala@linux.intel.com
Reviewed-by: Takashi Iwai <tiwai@suse.de>
2017-05-03 16:23:56 +03:00
Ville Syrjälä
bb4ac5a0ec ALSA: x86: Prepare LPE audio ctls for multiple PCMs
In preparation for register a PCM device for each pipe adjust
link up the ctl elements with the corresponding PCM device.

Cc: Takashi Iwai <tiwai@suse.de>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170427160231.13337-10-ville.syrjala@linux.intel.com
Reviewed-by: Takashi Iwai <tiwai@suse.de>
2017-05-03 16:21:44 +03:00
Ville Syrjälä
a8562e4dec drm/i915: Clean up the LPE audio platform data
Split the LPE audio platform data into a port specific
chunk and device specific chunk. Eventually we'll have
a port specific chunk for each port, but for now we'll
stick to just one.

We'll also get rid of the intel_hdmi_lpe_audio_eld structure
which doesn't seem to have any real reason to exist.

v2: Organize per port instead of per pipe

Cc: Takashi Iwai <tiwai@suse.de>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170427160231.13337-9-ville.syrjala@linux.intel.com
Reviewed-by: Takashi Iwai <tiwai@suse.de>
2017-05-03 16:21:26 +03:00
Ville Syrjälä
265fa2e18f drm/i915: Remove hdmi_connected from LPE audio pdata
We can determine that the pipe was shut down from pipe<0, so there's
no point in duplicating that information as 'hdmi_connected'.

v2: Use pipe<0 instead of port<0 as we'll want to do per-port
    PCM devices later
    Initialize pipe to -1 to inidicate inactive initial state

Cc: Takashi Iwai <tiwai@suse.de>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170427160231.13337-7-ville.syrjala@linux.intel.com
Reviewed-by: Takashi Iwai <tiwai@suse.de>
2017-05-03 16:20:32 +03:00
Ville Syrjälä
c98ec5ba6c drm/i915: Replace tmds_clock_speed and link_rate with just ls_clock
There's no need to distinguish between the DP link rate and HDMI TMDS
clock for the purposes of the LPE audio. Both are actually the same
thing more or less, which is the link symbol clock. So let's just
call the thing ls_clock and simplify the code.

Cc: Takashi Iwai <tiwai@suse.de>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170427160231.13337-6-ville.syrjala@linux.intel.com
Reviewed-by: Takashi Iwai <tiwai@suse.de>
2017-05-03 16:20:26 +03:00
Ville Syrjälä
d220559580 drm/i915: Remove the unused pending_notify from LPE platform data
The pending_notify flag in the LPE audio platform data is pointless,
actually unused. So let's kill it off.

v2: Fix typo in patch subject

Cc: Takashi Iwai <tiwai@suse.de>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170427160231.13337-5-ville.syrjala@linux.intel.com
Reviewed-by: Takashi Iwai <tiwai@suse.de>
2017-05-03 16:19:39 +03:00
Ville Syrjälä
8d5c30308d ALSA: x86: Clear the pdata.notify_lpe_audio pointer before teardown
Clear the notify function pointer in the platform data before we tear
down the driver. Otherwise i915 would end up calling a stale function
pointer and possibly explode.

Cc: stable@vger.kernel.org
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170427160231.13337-3-ville.syrjala@linux.intel.com
Reviewed-by: Takashi Iwai <tiwai@suse.de>
2017-05-03 16:19:07 +03:00
Ville Syrjälä
183c00350c drm/i915: Fix runtime PM for LPE audio
Not calling pm_runtime_enable() means that runtime PM can't be
enabled at all via sysfs. So we definitely need to call it
from somewhere.

Calling it from the driver seems like a bad idea because it
would have to be paired with a pm_runtime_disable() at driver
unload time, otherwise the core gets upset. Also if there's
no LPE audio driver loaded then we couldn't runtime suspend
i915 either.

So it looks like a better plan is to call it from i915 when
we register the platform device. That seems to match how
pci generally does things. I cargo culted the
pm_runtime_forbid() and pm_runtime_set_active() calls from
pci as well.

The exposed runtime PM API is massive an thorougly misleading, so
I don't actually know if this is how you're supposed to use the API
or not. But it seems to work. I can now runtime suspend i915 again
with or without the LPE audio driver loaded, and reloading the
LPE audio driver also seems to work.

Note that powertop won't auto-tune runtime PM for platform devices,
which is a little annoying. So I'm not sure that leaving runtime
PM in "on" mode by default is the best choice here. But I've left
it like that for now at least.

Also remove the comment about there not being much benefit from
LPE audio runtime PM. Not allowing runtime PM blocks i915 runtime
PM, which will also block s0ix, and that could have a measurable
impact on power consumption.

Cc: stable@vger.kernel.org
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Fixes: 0b6b524f39 ("ALSA: x86: Don't enable runtime PM as default")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170427160231.13337-2-ville.syrjala@linux.intel.com
Reviewed-by: Takashi Iwai <tiwai@suse.de>
2017-05-03 16:18:23 +03:00
Takashi Iwai
c6736a94d0 ALSA: x86: Make CONFIG_SND_X86 bool
CONFIG_SND_X86 is a menu config to filter only for x86-specific
drivers in its sub-menu, and this doesn't have to be tristate but
rather it should be a bool.  Also, like other sub-menu configs, it's
more user-friendly to be default=y; it's merely a menu config and the
actual drivers are configured in the sub-menu, after all.

Fixes: 287599cf2d ("ALSA: add Intel HDMI LPE audio driver for BYT/CHT-T")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-03-21 13:26:02 +01:00
Arnd Bergmann
4b49f0f7ee ALSA: x86: hdmi: select CONFIG_SND_PCM
The newly added driver uses the PCM helpers and fails to link if they are disabled:

sound/built-in.o: In function `hdmi_lpe_audio_runtime_suspend':
intel_hdmi_audio.c:(.text+0x15906): undefined reference to `snd_pcm_suspend'
sound/built-in.o: In function `had_pcm_hw_params':
intel_hdmi_audio.c:(.text+0x15ac7): undefined reference to `snd_pcm_lib_malloc_pages'
sound/built-in.o: In function `had_pcm_open':
intel_hdmi_audio.c:(.text+0x15d49): undefined reference to `snd_pcm_hw_constraint_integer'

This uses a Kconfig 'select' statement to make sure they are enabled.

Fixes: 5dab11d897 ("ALSA: x86: hdmi: Add audio support for BYT and CHT")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-02-21 23:39:14 +01:00
Takashi Iwai
0b6b524f39 ALSA: x86: Don't enable runtime PM as default
Unlike HSW and newer, BYT/CHT devices have no fine control of audio
power domain in i915 side.  Since there is little gain by runtime PM
on BYT/CHT, so far, this commit removes the pm_runtime_enable() call
as default.

User who still wants the runtime PM may adjust the corresponding
sysfs files (power/control and power/autosuspend_delay_ms)
appropriately, of course.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-02-21 22:23:14 +01:00
Takashi Iwai
3002b9fb7c ALSA: x86: Use runtime PM autosuspend
This patch adds a few lines to the driver to use autosuspend for the
runtime PM.  It'll become useful with the combination of the keep-link
feature.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-02-21 22:17:45 +01:00
Takashi Iwai
b1ef30e5ed ALSA: x86: Don't bail out from PCM ops when disconnected
Currently the driver returns -ENODEV when the monitor is disconnected.
But PA alsa module doesn't like this and it starts playing Juliet,
kills itself as if it were a fatal tragedy.

Since we protect the whole read/write at disconnection, just allow the
PCM accesses even during disconnection.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-02-16 09:22:44 +01:00
Takashi Iwai
2d42c033ae ALSA: x86: Minor code rearrangement
Put the stuff in the right order; notification should be at the end of
the action.

Also dropped a superfluous debug print and incorrect comments.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-02-16 09:22:44 +01:00
Takashi Iwai
be9a2e933e ALSA: x86: Stop the stream when buffer is processed after disconnection
This shouldn't happen, but just to be sure...

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-02-16 09:22:43 +01:00
Takashi Iwai
28ed125b9a ALSA: x86: Avoid register accesses during disconnection
It seems that accessing registers during disconnection often leads to
the GPU pipe error.  The original driver had a similar check in the
past, but it was lost through refactoring.  Now put a connection check
in the register access functions.

One exception is the irq handler: it still needs to access the raw
register even while disconnected, because it has to read and write to
ACK the irq mask.  Although the irq shouldn't be raised while
disconnected (the stream should have been disabled), let's make it
safer for now.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-02-16 09:22:43 +01:00
Takashi Iwai
a72ccfbad7 ALSA: x86: Don't return an error from chmap ctl at disconnected
It's not wise to return an error at info/get callback when
disconnected, which happens at any time.
The chmap ctl is supposed to fill zero for such a case, instead.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-02-16 09:22:43 +01:00
Takashi Iwai
18353192b8 ALSA: x86: Fix memory leak in had_build_channel_allocation_map()
The previously allocated chmap has to be released before setting the
new one.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-02-16 09:22:42 +01:00
Takashi Iwai
5def90196b ALSA: x86: Use snd_pcm_stop_xrun() for connection / disconnection paths
This seems more friendly to user-space, as it's notified at least as
an error, instead of forcibly moving the PCM state to SETUP out of
sudden.

Moreover, snd_pcm_stop() needs an extra PCM spinlock I forgot, while
snd_pcm_stop_xrun() takes the spinlock by itself.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-02-16 09:22:42 +01:00
Takashi Iwai
b9bacf275c ALSA: x86: Implement jack control
This patch implements a jack interface for notifying HDMI/DP
connection.  PA listens to this, so it can handle the monitor
connection more gracefully.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-02-16 09:22:42 +01:00
Takashi Iwai
df42cb499e ALSA: x86: Drop unused stream.running field
The pcm_stream_info.running field is only set in the PCM trigger
callback but never referred, thus it can be safely removed.

Also, properly cover the spinlock in both the trigger START and STOP
to protect had_enable_audio() calls.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-02-13 14:51:13 +01:00
Takashi Iwai
e2acecf2c8 ALSA: x86: Handle reset at prepare callback
Currently the driver handles some reset procedure at the trigger STOP
and the underrun functions, where both are executed in the interrupt
context.  Especially the underrun function has a sync-loop to clear
the UNDERRUN status bit, and this is supposed to be one of plausible
causes of GPU hangup.

Since the job to be done in the interrupt handler should be minimum,
we move the reset function out of trigger and underrun, and push it
into the prepare (and hw_free) callbacks instead.  Here a new flag,
need_reset, is introduced to indicate the requirement of the reset
procedure.  This is for avoiding the multiple resets when PCM prepare
is called sequentially.

Also in the UNDERRUN bit-clear sync loop, take a longer pause to be in
the safer side.  Taking a longer delay is no longer a problem now
because we're running in the normal context.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-02-13 14:48:43 +01:00
Takashi Iwai
3fe2cf7eb2 ALSA: x86: Support S16 format
Now we support S16 PCM format in addition.  For this, we need to set
packet_mode=1 in AUD_CONFIG register.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-02-10 10:21:47 +01:00
Takashi Iwai
85bd8748ca ALSA: x86: Support S32 format
The hardware has the support for the left-aligned 24bit format in
32bit packet.  This corresponds to S32 format in ALSA.  We need to set
the msbits restriction as well to inform user-space that only MSB
24bit are available.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-02-10 10:21:45 +01:00
Takashi Iwai
e8de9859e4 ALSA: x86: Allow no-period-wakeup setup
In the current implementation, the driver may update the BDs even at
PCM pointer callback.  This allows us to skip the period interrupt
effectively.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-02-10 10:21:44 +01:00
Takashi Iwai
8d48c0163d ALSA: x86: Allow single period PCM operation
This is an implementation of PCM streaming with only 1 period.
Since the hardware requires the refresh of BDs after each BD
processing finishes, we'd need at least two BDs.  The trick is that
both BDs point to the same content: the address of the PCM buffer
head, and the whole buffer size.  Then it loops over to the whole
buffer again after it finished once.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-02-10 10:21:42 +01:00
Takashi Iwai
a9ebdd0ef2 ALSA: x86: Don't pass SNDRV_PCM_INFO_BATCH flag
The PCM engine on LPE audio isn't like a batch-style process any
longer, but rather it deals with the standard ring buffer.  Remove the
BATCH info flag so that PA can handle the buffer in timer-sched mode.

Similarly, the DOUBLE flag is also superfluous.  Drop both bits.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-02-10 10:21:41 +01:00
Takashi Iwai
40ce4b5d70 ALSA: x86: Cache AUD_CONFIG register value
At enabling the audio, we modify AUD_CONFIG register bit 0.  So far,
it does read-modify-write procedure with a special hack for the
channel bits due to the silicon bug.  But we can optimize it by
remembering the AUD_CONFIG register value privately.  This simplifies
the things a lot.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-02-07 16:27:41 +01:00
Takashi Iwai
77531beeb9 ALSA: x86: Rearrange defines
We have two header files and everything is mixed up chaotically.
Move the chip-specific definitions like the hardware registers to
intel_hdmi_lpe_audio.h, and the rest, the implementation specific
stuff into intel_hdmi_audio.h.

In addition, put some more comments to the register fields, and fix
the incorrect name prefix for AUD_HDMI_STATUS bits, too.

The whole changes are merely a code shuffling, and there is no
functional change.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-02-07 15:12:37 +01:00
Arnd Bergmann
1df989242d ALSA: x86: mark hdmi suspend/resume functions as __maybe_unused
The two functions are unused when CONFIG_PM_SLEEP is disabled:

sound/x86/intel_hdmi_audio.c:1633:12: error: 'hdmi_lpe_audio_resume' defined but not used [-Werror=unused-function]
sound/x86/intel_hdmi_audio.c:1622:12: error: 'hdmi_lpe_audio_suspend' defined but not used [-Werror=unused-function]

Marking them as __maybe_unused avoids the warning without introducing an
ugly #ifdef.

Fixes: 182cdf23db ("ALSA: x86: Implement runtime PM")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-02-07 15:05:50 +01:00
Takashi Iwai
873ab03575 ALSA: x86: Fix driver name string overflow
The driver sets card->driver name string over its size (16 bytes).
Shorten the name string to fit with it.

Also, set more verbose string to card->shortname and ->longname.
This doesn't have to be identical with card->driver at all.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-02-07 12:33:20 +01:00
Takashi Iwai
075a1d46be ALSA: x86: Rename had_enable_audio_int() to had_ack_irqs()
had_enable_audio_int() came from the LPE audio shell set_caps
callback with ENABLE_INT and DISABLE_INT caps.  I interpreted as these
correspond to enabling / disabling the audio interface, but the actual
implementation is only to clear (send ACK) to both BUFFER_DONE and
BUFFER_UNDERRUN interrupts unconditionally.  And, there is no
counterpart, DISABLE_INT, code at all.

For avoiding the further misunderstanding, rename the function to the
more fitting one, had_ack_irqs(), and drop the calls with enable=false
in allover places.  There is no functional changes at all.

After this patch, there is only one caller at the PCM trigger start.
Then it's doubtful whether this call is still really needed or not; I
bet it not, but let's stay in the safer side for now and keep it as
was.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-02-07 09:43:01 +01:00
Takashi Iwai
3e21a76ca3 ALSA: x86: Drop suspicious U24 format support
U24 format is declared to be supported by the driver, but this looks
really doubtful, as there is no corresponding code.  Better to drop
it.  This format is very uncommon, so there should be practically no
impact by this change.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-02-07 09:43:01 +01:00
Takashi Iwai
e1b239f371 ALSA: x86: Refactor PCM process engine
This is again a big rewrite of the driver; now it touches the code to
process PCM stream transfers.

The most fundamental change is that the driver may support more than
four periods.  Instead of keeping the same index between both the ring
buffer (with the fixed four buffer descriptors) and the PCM buffer
periods, we keep difference indices for both (bd_head and pcm_head
fields).  In addition, when the periods are more than four, we need to
track both head and next indices.  That is, we now have three indices:
bd_head, pcm_head and pcm_filled.

Also, the driver works better for periods < 4, too: the remaining BDs
out of four are marked as invalid, so that the hardware skips those
BDs in its loop.

By this flexibility, we can use even ALSA-lib dmix plugin, which
requires 16 periods as default.

The buffer size could be up to 20bit, so the max buffer size was
increased accordingly.  However, the buffer pre-allocation is kept as
the old value (600kB) as default.  The reason is the limited number of
BDs: since it doesn't suffice for the useful SG page management that
can fit with the usual page allocator like some other drivers, we have
to still allocate continuous pages, hence we shouldn't take too big
memories there.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-02-06 12:21:10 +01:00
Takashi Iwai
b556290f9a ALSA: x86: Unify local function prefix
Use had_ prefix consistently to all local helper functions, as well as
had_pcm_ for PCM ops.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-02-05 08:49:35 +01:00
Takashi Iwai
f4566aa112 ALSA: x86: Minor cleanup of reset buffer procedure
The procedure to reset buffer pointers is performed in two places and
still open-coded.  Simplify the helper function and use it
consistently.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-02-05 08:49:02 +01:00
Takashi Iwai
83af57dd51 ALSA: x86: Don't check connection in lowlevel accessors
The lowlevel register read/write don't have to be careful about the
connection state.  It should be checked in the caller side instead.
By dropping the check, we can simplify the code, and readability.

This patch also refacors the functions slightly: namely,
- drop the useless always-zero return values
- fold the inline functions to the main accessor functions themselves
- move the DP audio hack for AUD_CONFIG to the caller side
- simplify snd_intelhad_eanble_audio() and drop the unused
  had_read_modify()

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-02-05 08:47:25 +01:00
Takashi Iwai
412bbe7d5b ALSA: x86: Explicit specify 32bit DMA
LPE audio is capable only up to 32bit address, as it seems.
Then we should limit the DMA addresses accordingly via dma-mapping
API.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-02-05 08:46:45 +01:00
Takashi Iwai
91b0cb0cc0 ALSA: x86: Rename drv_status to connected
After the rewrite of the runtime PM code, we have only two driver
status: CONNECTED and DISCONNECTED.  So it's clearer to use a boolean
flag, and name it easier one, "connected".

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-02-03 17:38:02 +01:00
Takashi Iwai
73997b050c ALSA: x86: Yet more tidy-up and clean-ups
- Add a few more comments to functions.

- Move the initialization of some PCM state variables to open and
  prepare callbacks, where these are clearer places.

- Remove superfluous NULL checks.

- Get rid of the bogus drv_status change to CONNECTED at close;
  this doesn't make any sense.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-02-03 17:37:50 +01:00
Takashi Iwai
44684f61b2 ALSA: x86: Simplify comments
It's a stand-alone small driver code, and we don't have to describe
too much formalized comments in kernel-doc style for local functions
at all.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-02-03 17:37:41 +01:00