ioremap_page_range() should be used for ranges within vmalloc range only.
The vmalloc ranges are allocated by get_vm_area(). PCI has "resource"
allocator that manages PCI_IOBASE, IO_SPACE_LIMIT address range, hence
introduce vmap_page_range() to be used exclusively to map pages
in PCI address space.
Fixes: 3e49a866c9 ("mm: Enforce VM_IOREMAP flag and range in ioremap_page_range.")
Reported-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://lore.kernel.org/bpf/CANiq72ka4rir+RTN2FQoT=Vvprp_Ao-CvoYEkSNqtSY+RZj+AA@mail.gmail.com
The unflatten_and_copy_device_tree() function contains a call to
memblock_alloc(). This means that memblock is allocating memory before
any of the reserved memory regions are set aside in the arch_mem_init()
function which calls early_init_fdt_scan_reserved_mem(). Therefore,
there is a possibility for memblock to allocate from any of the
reserved memory regions.
Hence, move the call to early_init_fdt_scan_reserved_mem() to be earlier
in the init sequence, so that the reserved memory regions are set aside
before any allocations are done using memblock.
Cc: stable@vger.kernel.org
Fixes: 88d4d957ed ("LoongArch: Add FDT booting support from efi system table")
Signed-off-by: Oreoluwa Babatunde <quic_obabatun@quicinc.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
LoongArch already supports two crashkernel regions in kexec-tools, so we
can directly use the common interface to support crashkernel=X,[high,low]
after commit 0ab97169aa ("crash_core: add generic function to do
reservation").
With the help of newly changed function parse_crashkernel() and generic
reserve_crashkernel_generic(), crashkernel reservation can be simplified
by steps:
1) Add a new header file <asm/crash_core.h>, then define CRASH_ALIGN,
CRASH_ADDR_LOW_MAX and CRASH_ADDR_HIGH_MAX and in <asm/crash_core.h>;
2) Add arch_reserve_crashkernel() to call parse_crashkernel() and
reserve_crashkernel_generic();
3) Add ARCH_HAS_GENERIC_CRASHKERNEL_RESERVATION Kconfig in
arch/loongarch/Kconfig.
One can reserve the crash kernel from high memory above DMA zone range
by explicitly passing "crashkernel=X,high"; or reserve a memory range
below 4G with "crashkernel=X,low". Besides, there are few rules need to
take notice:
1) "crashkernel=X,[high,low]" will be ignored if "crashkernel=size" is
specified.
2) "crashkernel=X,low" is valid only when "crashkernel=X,high" is passed
and there is enough memory to be allocated under 4G.
3) When allocating crashkernel above 4G and no "crashkernel=X,low" is
specified, a 128M low memory will be allocated automatically for
swiotlb bounce buffer.
See Documentation/admin-guide/kernel-parameters.txt for more information.
Following test cases have been performed as expected:
1) crashkernel=256M //low=256M
2) crashkernel=1G //low=1G
3) crashkernel=4G //high=4G, low=128M(default)
4) crashkernel=4G crashkernel=256M,high //high=4G, low=128M(default), high is ignored
5) crashkernel=4G crashkernel=256M,low //high=4G, low=128M(default), low is ignored
6) crashkernel=4G,high //high=4G, low=128M(default)
7) crashkernel=256M,low //low=0M, invalid
8) crashkernel=4G,high crashkernel=256M,low //high=4G, low=256M
9) crashkernel=4G,high crashkernel=4G,low //high=0M, low=0M, invalid
10) crashkernel=512M@2560M //low=512M
11) crashkernel=1G,high crashkernel=0M,low //high=1G, low=0M
Recommended usage in general:
1) In the case of small memory: crashkernel=512M
2) In the case of large memory: crashkernel=1024M,high crashkernel=128M,low
Signed-off-by: Youling Tang <tangyouling@kylinos.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
During the upstream progress of those DT-based drivers, DT properties
are changed a lot so very different from those in existing bootloaders.
It is inevitably that some existing systems do not provide a standard,
canonical device tree to the kernel at boot time. So let's provide a
device tree table in the kernel, keyed by the dts filename, containing
the relevant DTBs.
We can use the built-in dts files as references. Each SoC has only one
built-in dts file which describes all possible device information of
that SoC, so the dts files are good examples during development.
And as a reference, our built-in dts file only enables the most basic
bootable combinations (so it is generic enough), acts as an alternative
in case the dts in the bootloader is unexpected.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Here is the big set of tty/serial driver changes for 6.7-rc1. Included
in here are:
- console/vgacon cleanups and removals from Arnd
- tty core and n_tty cleanups from Jiri
- lots of 8250 driver updates and cleanups
- sc16is7xx serial driver updates
- dt binding updates
- first set of port lock wrapers from Thomas for the printk fixes
coming in future releases
- other small serial and tty core cleanups and updates
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZUTbaw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yk9+gCeKdoRb8FDwGCO/GaoHwR4EzwQXhQAoKXZRmN5
LTtw9sbfGIiBdOTtgLPb
=6PJr
-----END PGP SIGNATURE-----
Merge tag 'tty-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty and serial updates from Greg KH:
"Here is the big set of tty/serial driver changes for 6.7-rc1. Included
in here are:
- console/vgacon cleanups and removals from Arnd
- tty core and n_tty cleanups from Jiri
- lots of 8250 driver updates and cleanups
- sc16is7xx serial driver updates
- dt binding updates
- first set of port lock wrapers from Thomas for the printk fixes
coming in future releases
- other small serial and tty core cleanups and updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (193 commits)
serdev: Replace custom code with device_match_acpi_handle()
serdev: Simplify devm_serdev_device_open() function
serdev: Make use of device_set_node()
tty: n_gsm: add copyright Siemens Mobility GmbH
tty: n_gsm: fix race condition in status line change on dead connections
serial: core: Fix runtime PM handling for pending tx
vgacon: fix mips/sibyte build regression
dt-bindings: serial: drop unsupported samsung bindings
tty: serial: samsung: drop earlycon support for unsupported platforms
tty: 8250: Add note for PX-835
tty: 8250: Fix IS-200 PCI ID comment
tty: 8250: Add Brainboxes Oxford Semiconductor-based quirks
tty: 8250: Add support for Intashield IX cards
tty: 8250: Add support for additional Brainboxes PX cards
tty: 8250: Fix up PX-803/PX-857
tty: 8250: Fix port count of PX-257
tty: 8250: Add support for Intashield IS-100
tty: 8250: Add support for Brainboxes UP cards
tty: 8250: Add support for additional Brainboxes UC cards
tty: 8250: Remove UC-257 and UC-431
...
there's little I can say which isn't in the individual changelogs.
The lengthier patch series are
- "kdump: use generic functions to simplify crashkernel reservation in
arch", from Baoquan He. This is mainly cleanups and consolidation of
the "crashkernel=" kernel parameter handling.
- After much discussion, David Laight's "minmax: Relax type checks in
min() and max()" is here. Hopefully reduces some typecasting and the
use of min_t() and max_t().
- A group of patches from Oleg Nesterov which clean up and slightly fix
our handling of reads from /proc/PID/task/... and which remove
task_struct.therad_group.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZUQP9wAKCRDdBJ7gKXxA
jmOAAQDh8sxagQYocoVsSm28ICqXFeaY9Co1jzBIDdNesAvYVwD/c2DHRqJHEiS4
63BNcG3+hM9nwGJHb5lyh5m79nBMRg0=
=On4u
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2023-11-02-14-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
"As usual, lots of singleton and doubleton patches all over the tree
and there's little I can say which isn't in the individual changelogs.
The lengthier patch series are
- 'kdump: use generic functions to simplify crashkernel reservation
in arch', from Baoquan He. This is mainly cleanups and
consolidation of the 'crashkernel=' kernel parameter handling
- After much discussion, David Laight's 'minmax: Relax type checks in
min() and max()' is here. Hopefully reduces some typecasting and
the use of min_t() and max_t()
- A group of patches from Oleg Nesterov which clean up and slightly
fix our handling of reads from /proc/PID/task/... and which remove
task_struct.thread_group"
* tag 'mm-nonmm-stable-2023-11-02-14-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (64 commits)
scripts/gdb/vmalloc: disable on no-MMU
scripts/gdb: fix usage of MOD_TEXT not defined when CONFIG_MODULES=n
.mailmap: add address mapping for Tomeu Vizoso
mailmap: update email address for Claudiu Beznea
tools/testing/selftests/mm/run_vmtests.sh: lower the ptrace permissions
.mailmap: map Benjamin Poirier's address
scripts/gdb: add lx_current support for riscv
ocfs2: fix a spelling typo in comment
proc: test ProtectionKey in proc-empty-vm test
proc: fix proc-empty-vm test with vsyscall
fs/proc/base.c: remove unneeded semicolon
do_io_accounting: use sig->stats_lock
do_io_accounting: use __for_each_thread()
ocfs2: replace BUG_ON() at ocfs2_num_free_extents() with ocfs2_error()
ocfs2: fix a typo in a comment
scripts/show_delta: add __main__ judgement before main code
treewide: mark stuff as __ro_after_init
fs: ocfs2: check status values
proc: test /proc/${pid}/statm
compiler.h: move __is_constexpr() to compiler.h
...
Currently the code disables WUC only disables it for ioremap_wc(), which
is only used when mapping writecombine pages like ioremap() (mapped to
the kernel space). But for VRAM mapped in TTM/GEM, it is mapped with a
crafted pgprot by the pgprot_writecombine() function, in which case WUC
isn't disabled now.
Disable WUC for pgprot_writecombine() (fallback to SUC) if needed, like
ioremap_wc().
This improves the AMDGPU driver's stability (solves some misrendering)
on Loongson-3A5000/3A6000 machines.
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
After the vga console no longer relies on global screen_info, there are
only two remaining use cases:
- on the x86 architecture, it is used for multiple boot methods
(bzImage, EFI, Xen, kexec) to commucate the initial VGA or framebuffer
settings to a number of device drivers.
- on other architectures, it is only used as part of the EFI stub,
and only for the three sysfb framebuffers (simpledrm, simplefb, efifb).
Remove the duplicate data structure definitions by moving it into the
efi-init.c file that sets it up initially for the EFI case, leaving x86
as an exception that retains its own definition for non-EFI boots.
The added #ifdefs here are optional, I added them to further limit the
reach of screen_info to configurations that have at least one of the
users enabled.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Helge Deller <deller@gmx.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20231017093947.3627976-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On non-x86 architectures, the screen_info variable is generally only
used for the VGA console where supported, and in some cases the EFI
framebuffer or vga16fb.
Now that we have a definite list of which architectures actually use it
for what, use consistent #ifdef checks so the global variable is only
defined when it is actually used on those architectures.
Loongarch and riscv have no support for vgacon or vga16fb, but
they support EFI firmware, so only that needs to be checked, and the
initialization can be removed because that is handled by EFI.
IA64 has both vgacon and EFI, though EFI apparently never uses
a framebuffer here.
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Khalid Aziz <khalid@gonehiking.org>
Acked-by: Helge Deller <deller@gmx.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20231009211845.3136536-3-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add two parameters 'low_size' and 'high' to function parse_crashkernel(),
later crashkernel=,high|low parsing will be added. Make adjustments in
all call sites of parse_crashkernel() in arch.
Link: https://lkml.kernel.org/r/20230914033142.676708-3-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Zhen Lei <thunder.leizhen@huawei.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chen Jiahao <chenjiahao16@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
1/8 of kernel addresses reserved for shadow memory. But for LoongArch,
There are a lot of holes between different segments and valid address
space (256T available) is insufficient to map all these segments to kasan
shadow memory with the common formula provided by kasan core, saying
(addr >> KASAN_SHADOW_SCALE_SHIFT) + KASAN_SHADOW_OFFSET
So LoongArch has a arch-specific mapping formula, different segments are
mapped individually, and only limited space lengths of these specific
segments are mapped to shadow.
At early boot stage the whole shadow region populated with just one
physical page (kasan_early_shadow_page). Later, this page is reused as
readonly zero shadow for some memory that kasan currently don't track.
After mapping the physical memory, pages for shadow memory are allocated
and mapped.
Functions like memset()/memcpy()/memmove() do a lot of memory accesses.
If bad pointer passed to one of these function it is important to be
caught. Compiler's instrumentation cannot do this since these functions
are written in assembly.
KASan replaces memory functions with manually instrumented variants.
Original functions declared as weak symbols so strong definitions in
mm/kasan/kasan.c could replace them. Original functions have aliases
with '__' prefix in names, so we could call non-instrumented variant
if needed.
Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
On FDT systems these command line processing are already taken care of
by early_init_dt_scan_chosen(). Add similar handling to the ACPI (non-
FDT) code path to allow these config options to work for ACPI (non-FDT)
systems too.
Signed-off-by: Zhihong Dong <donmor3000@hotmail.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
After commit c78c43fe7d ("LoongArch: Use acpi_arch_dma_setup() and
remove ARCH_HAS_PHYS_TO_DMA"), plat_swiotlb_setup() has been deleted,
so clean up the related code.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
LoongArch maintains cache coherency in hardware, but when paired with
LS7A chipsets the WUC attribute (Weak-ordered UnCached, which is similar
to WriteCombine) is out of the scope of cache coherency machanism for
PCIe devices (this is a PCIe protocol violation, which may be fixed in
newer chipsets).
This means WUC can only used for write-only memory regions now, so this
option is disabled by default, making WUC silently fallback to SUC for
ioremap(). You can enable this option if the kernel is ensured to run on
hardware without this bug.
Kernel parameter writecombine=on/off can be used to override the Kconfig
option.
Cc: stable@vger.kernel.org
Suggested-by: WANG Xuerui <kernel@xen0n.name>
Reviewed-by: WANG Xuerui <kernel@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
When the kernel crashkernel parameter is specified with just a size,
we are supposed to allocate a region from RAM to store the crashkernel,
"crashkernel=512M" would be recommended for kdump.
Fix this by lifting similar code from x86, importing it to LoongArch
with LoongArch specific parameters added. We allocate the crashkernel
region from the first 4GB of physical memory (because SWIOTLB should be
allocated below 4GB). However, LoongArch currently does not implement
crashkernel_low and crashkernel_high the same as x86.
When X is not specified, crash_base defaults to 0 (crashkernel=YM@XM).
Signed-off-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Similar to commit 6d0068ad15 ("MIPS: Loongson64: Process ISA
Node in DeviceTree"), we process ISA node in DeviceTree for FDT-based
systems.
Previously, we are hardcoding reserved ISA I/O Space in, now we are
processing it I/O via DeviceTree directly. The ranges property of ISA
node is used to determine the size and address of reserved I/O space.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Since commit 40cd01a9c324("efi/loongarch: libstub: remove dependency on
flattened DT"), we can parse the FDT from efi system table.
And now, LoongArch is coming to support booting with FDT, so we add the
relevant booting support as well as parameter parsing.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Introduce the "alternative" mechanism from ARM64 and x86 for LoongArch
to apply runtime patching. The main purpose of this patch is to provide
a framework. In future we can use this mechanism (i.e., the ALTERNATIVE
and ALTERNATIVE_2 macros) to optimize hotspot functions according to cpu
features.
Signed-off-by: Jun Yi <yijun@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Combine acpi_boot_table_init() and acpi_boot_init() since they are very
simple, and we don't need to check the return value of acpi_boot_init().
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
This patch adds support for kdump. In kdump case the normal kernel will
reserve a region for the crash kernel and jump there on panic.
Arch-specific functions are added to allow for implementing a crash dump
file interface, /proc/vmcore, which can be viewed as a ELF file.
A user-space tool, such as kexec-tools, is responsible for allocating a
separate region for the core's ELF header within the crash kdump kernel
memory and filling it in when executing kexec_load().
Then, its location will be advertised to the crash dump kernel via a
command line argument "elfcorehdr=", and the crash dump kernel will
preserve this region for later use with arch_reserve_vmcore() at boot
time.
At the same time, the crash kdump kernel is also limited within the
"crashkernel" area via a command line argument "mem=", so as not to
destroy the original kernel dump data.
In the crash dump kernel environment, /proc/vmcore is used to access the
primary kernel's memory with copy_oldmem_page().
I tested kdump on LoongArch machines (Loongson-3A5000) and it works as
expected (suggested crashkernel parameter is "crashkernel=512M@2560M"),
you may test it by triggering a crash through /proc/sysrq-trigger:
$ sudo kexec -p /boot/vmlinux-kdump --reuse-cmdline --append="nr_cpus=1"
# echo c > /proc/sysrq-trigger
Signed-off-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
We can support more cache attributes (e.g., CC, SUC and WUC) and page
protection when we use TLB for ioremap(). The implementation is based
on GENERIC_IOREMAP.
The existing simple ioremap() implementation has better performance so
we keep it and introduce ARCH_IOREMAP to control the selection.
We move pagetable_init() earlier to make early ioremap() works, and we
modify the PCI ecam mapping because the TLB-based version of ioremap()
will actually take the size into account.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
From Phil Auld:
drivers/base: Fix unsigned comparison to -1 in CPUMAP_FILE_MAX_BYTES
From me:
cpumask: cleanup nr_cpu_ids vs nr_cpumask_bits mess
This series cleans that mess and adds new config FORCE_NR_CPUS that
allows to optimize cpumask subsystem if the number of CPUs is known
at compile-time.
From me:
lib: optimize find_bit() functions
Reworks find_bit() functions based on new FIND_{FIRST,NEXT}_BIT() macros.
From me:
lib/find: add find_nth_bit()
Adds find_nth_bit(), which is ~70 times faster than bitcounting with
for_each() loop:
for_each_set_bit(bit, mask, size)
if (n-- == 0)
return bit;
Also adds bitmap_weight_and() to let people replace this pattern:
tmp = bitmap_alloc(nbits);
bitmap_and(tmp, map1, map2, nbits);
weight = bitmap_weight(tmp, nbits);
bitmap_free(tmp);
with a single bitmap_weight_and() call.
From me:
cpumask: repair cpumask_check()
After switching cpumask to use nr_cpu_ids, cpumask_check() started
generating many false-positive warnings. This series fixes it.
From Valentin Schneider:
bitmap,cpumask: Add for_each_cpu_andnot() and for_each_cpu_andnot()
Extends the API with one more function and applies it in sched/core.
-----BEGIN PGP SIGNATURE-----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=Q/+F
-----END PGP SIGNATURE-----
Merge tag 'bitmap-6.1-rc1' of https://github.com/norov/linux
Pull bitmap updates from Yury Norov:
- Fix unsigned comparison to -1 in CPUMAP_FILE_MAX_BYTES (Phil Auld)
- cleanup nr_cpu_ids vs nr_cpumask_bits mess (me)
This series cleans that mess and adds new config FORCE_NR_CPUS that
allows to optimize cpumask subsystem if the number of CPUs is known
at compile-time.
- optimize find_bit() functions (me)
Reworks find_bit() functions based on new FIND_{FIRST,NEXT}_BIT()
macros.
- add find_nth_bit() (me)
Adds find_nth_bit(), which is ~70 times faster than bitcounting with
for_each() loop:
for_each_set_bit(bit, mask, size)
if (n-- == 0)
return bit;
Also adds bitmap_weight_and() to let people replace this pattern:
tmp = bitmap_alloc(nbits);
bitmap_and(tmp, map1, map2, nbits);
weight = bitmap_weight(tmp, nbits);
bitmap_free(tmp);
with a single bitmap_weight_and() call.
- repair cpumask_check() (me)
After switching cpumask to use nr_cpu_ids, cpumask_check() started
generating many false-positive warnings. This series fixes it.
- Add for_each_cpu_andnot() and for_each_cpu_andnot() (Valentin
Schneider)
Extends the API with one more function and applies it in sched/core.
* tag 'bitmap-6.1-rc1' of https://github.com/norov/linux: (28 commits)
sched/core: Merge cpumask_andnot()+for_each_cpu() into for_each_cpu_andnot()
lib/test_cpumask: Add for_each_cpu_and(not) tests
cpumask: Introduce for_each_cpu_andnot()
lib/find_bit: Introduce find_next_andnot_bit()
cpumask: fix checking valid cpu range
lib/bitmap: add tests for for_each() loops
lib/find: optimize for_each() macros
lib/bitmap: introduce for_each_set_bit_wrap() macro
lib/find_bit: add find_next{,_and}_bit_wrap
cpumask: switch for_each_cpu{,_not} to use for_each_bit()
net: fix cpu_max_bits_warn() usage in netif_attrmask_next{,_and}
cpumask: add cpumask_nth_{,and,andnot}
lib/bitmap: remove bitmap_ord_to_pos
lib/bitmap: add tests for find_nth_bit()
lib: add find_nth{,_and,_andnot}_bit()
lib/bitmap: add bitmap_weight_and()
lib/bitmap: don't call __bitmap_weight() in kernel code
tools: sync find_bit() implementation
lib/find_bit: optimize find_next_bit() functions
lib/find_bit: create find_first_zero_bit_le()
...
- implement EFI boot support for LoongArch
- implement generic EFI compressed boot support for arm64, RISC-V and
LoongArch, none of which implement a decompressor today
- measure the kernel command line into the TPM if measured boot is in
effect
- refactor the EFI stub code in order to isolate DT dependencies for
architectures other than x86
- avoid calling SetVirtualAddressMap() on arm64 if the configured size
of the VA space guarantees that doing so is unnecessary
- move some ARM specific code out of the generic EFI source files
- unmap kernel code from the x86 mixed mode 1:1 page tables
-----BEGIN PGP SIGNATURE-----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=d8Ps
-----END PGP SIGNATURE-----
Merge tag 'efi-next-for-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI updates from Ard Biesheuvel:
"A bit more going on than usual in the EFI subsystem. The main driver
for this has been the introduction of the LoonArch architecture last
cycle, which inspired some cleanup and refactoring of the EFI code.
Another driver for EFI changes this cycle and in the future is
confidential compute.
The LoongArch architecture does not use either struct bootparams or DT
natively [yet], and so passing information between the EFI stub and
the core kernel using either of those is undesirable. And in general,
overloading DT has been a source of issues on arm64, so using DT for
this on new architectures is a to avoid for the time being (even if we
might converge on something DT based for non-x86 architectures in the
future). For this reason, in addition to the patch that enables EFI
boot for LoongArch, there are a number of refactoring patches applied
on top of which separate the DT bits from the generic EFI stub bits.
These changes are on a separate topich branch that has been shared
with the LoongArch maintainers, who will include it in their pull
request as well. This is not ideal, but the best way to manage the
conflicts without stalling LoongArch for another cycle.
Another development inspired by LoongArch is the newly added support
for EFI based decompressors. Instead of adding yet another
arch-specific incarnation of this pattern for LoongArch, we are
introducing an EFI app based on the existing EFI libstub
infrastructure that encapulates the decompression code we use on other
architectures, but in a way that is fully generic. This has been
developed and tested in collaboration with distro and systemd folks,
who are eager to start using this for systemd-boot and also for arm64
secure boot on Fedora. Note that the EFI zimage files this introduces
can also be decompressed by non-EFI bootloaders if needed, as the
image header describes the location of the payload inside the image,
and the type of compression that was used. (Note that Fedora's arm64
GRUB is buggy [0] so you'll need a recent version or switch to
systemd-boot in order to use this.)
Finally, we are adding TPM measurement of the kernel command line
provided by EFI. There is an oversight in the TCG spec which results
in a blind spot for command line arguments passed to loaded images,
which means that either the loader or the stub needs to take the
measurement. Given the combinatorial explosion I am anticipating when
it comes to firmware/bootloader stacks and firmware based attestation
protocols (SEV-SNP, TDX, DICE, DRTM), it is good to set a baseline now
when it comes to EFI measured boot, which is that the kernel measures
the initrd and command line. Intermediate loaders can measure
additional assets if needed, but with the baseline in place, we can
deploy measured boot in a meaningful way even if you boot into Linux
straight from the EFI firmware.
Summary:
- implement EFI boot support for LoongArch
- implement generic EFI compressed boot support for arm64, RISC-V and
LoongArch, none of which implement a decompressor today
- measure the kernel command line into the TPM if measured boot is in
effect
- refactor the EFI stub code in order to isolate DT dependencies for
architectures other than x86
- avoid calling SetVirtualAddressMap() on arm64 if the configured
size of the VA space guarantees that doing so is unnecessary
- move some ARM specific code out of the generic EFI source files
- unmap kernel code from the x86 mixed mode 1:1 page tables"
* tag 'efi-next-for-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: (24 commits)
efi/arm64: libstub: avoid SetVirtualAddressMap() when possible
efi: zboot: create MemoryMapped() device path for the parent if needed
efi: libstub: fix up the last remaining open coded boot service call
efi/arm: libstub: move ARM specific code out of generic routines
efi/libstub: measure EFI LoadOptions
efi/libstub: refactor the initrd measuring functions
efi/loongarch: libstub: remove dependency on flattened DT
efi: libstub: install boot-time memory map as config table
efi: libstub: remove DT dependency from generic stub
efi: libstub: unify initrd loading between architectures
efi: libstub: remove pointless goto kludge
efi: libstub: simplify efi_get_memory_map() and struct efi_boot_memmap
efi: libstub: avoid efi_get_memory_map() for allocating the virt map
efi: libstub: drop pointless get_memory_map() call
efi: libstub: fix type confusion for load_options_size
arm64: efi: enable generic EFI compressed boot
loongarch: efi: enable generic EFI compressed boot
riscv: efi: enable generic EFI compressed boot
efi/libstub: implement generic EFI zboot
efi/libstub: move efi_system_table global var into separate object
...
LoongArch does not use FDT or DT natively [yet], and the only reason it
currently uses it is so that it can reuse the existing EFI stub code.
Overloading the DT with data passed between the EFI stub and the core
kernel has been a source of problems: there is the overlap between
information provided by EFI which DT can also provide (initrd base/size,
command line, memory descriptions), requiring us to reason about which
is which and what to prioritize. It has also resulted in ABI leaks,
i.e., internal ABI being promoted to external ABI inadvertently because
the bootloader can set the EFI stub's DT properties as well (e.g.,
"kaslr-seed"). This has become especially problematic with boot
environments that want to pretend that EFI boot is being done (to access
ACPI and SMBIOS tables, for instance) but have no ability to execute the
EFI stub, and so the environment that the EFI stub creates is emulated
[poorly, in some cases].
Another downside of treating DT like this is that the DT binary that the
kernel receives is different from the one created by the firmware, which
is undesirable in the context of secure and measured boot.
Given that LoongArch support in Linux is brand new, we can avoid these
pitfalls, and treat the DT strictly as a hardware description, and use a
separate handover method between the EFI stub and the kernel. Now that
initrd loading and passing the EFI memory map have been refactored into
pure EFI routines that use EFI configuration tables, the only thing we
need to pass directly is the kernel command line (even if we could pass
this via a config table as well, it is used extremely early, so passing
it directly is preferred in this case.)
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Use _DMA defined in ACPI spec for translation between
DMA address and CPU address, and implement acpi_arch_dma_setup
for initializing dev->dma_range_map, where acpi_dma_get_range
is called for parsing _DMA.
e.g.
If we have two dma ranges:
cpu address dma address size offset
0x200080000000 0x2080000000 0x400000000 0x1fe000000000
0x400080000000 0x4080000000 0x400000000 0x3fc000000000
_DMA for pci devices should be declared in host bridge as
flowing:
Name (_DMA, ResourceTemplate() {
QWordMemory (ResourceProducer,
PosDecode,
MinFixed,
MaxFixed,
NonCacheable,
ReadWrite,
0x0,
0x4080000000,
0x447fffffff,
0x3fc000000000,
0x400000000,
,
,
)
QWordMemory (ResourceProducer,
PosDecode,
MinFixed,
MaxFixed,
NonCacheable,
ReadWrite,
0x0,
0x2080000000,
0x247fffffff,
0x1fe000000000,
0x400000000,
,
,
)
})
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In preparation to support compile-time nr_cpu_ids, add a setter for
the variable.
This is a no-op for all arches.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
This patch adds efistub booting support, which is the standard UEFI boot
protocol for LoongArch to use.
We use generic efistub, which means we can pass boot information (i.e.,
system table, memory map, kernel command line, initrd) via a light FDT
and drop a lot of non-standard code.
We use a flat mapping to map the efi runtime in the kernel's address
space. In efi, VA = PA; in kernel, VA = PA + PAGE_OFFSET. As a result,
flat mapping is not identity mapping, SetVirtualAddressMap() is still
needed for the efi runtime.
Tested-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
[ardb: change fpic to fpie as suggested by Xi Ruoyao]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
We can see the "ROM Size" is different in the following outputs:
[root@linux loongson]# cat /sys/firmware/loongson/boardinfo
BIOS Information
Vendor : Loongson
Version : vUDK2018-LoongArch-V2.0.pre-beta8
ROM Size : 63 KB
Release Date : 06/15/2022
Board Information
Manufacturer : Loongson
Board Name : Loongson-LS3A5000-7A1000-1w-A2101
Family : LOONGSON64
[root@linux loongson]# dmidecode | head -11
...
Handle 0x0000, DMI type 0, 26 bytes
BIOS Information
Vendor: Loongson
Version: vUDK2018-LoongArch-V2.0.pre-beta8
Release Date: 06/15/2022
ROM Size: 4 MB
According to "BIOS Information (Type 0) structure" in the SMBIOS
Reference Specification [1], it shows 64K * (n+1) is the size of
the physical device containing the BIOS if the size is less than
16M.
Additionally, we can see the related code in dmidecode [2]:
u64 s = { .l = (code1 + 1) << 6 };
So the output of dmidecode is correct, the output of boardinfo
is wrong, fix it.
By the way, at present no need to consider the size is 16M or
greater on LoongArch, because it is usually 4M or 8M which is
enough to use.
[1] https://www.dmtf.org/sites/default/files/standards/documents/DSP0134_3.6.0.pdf
[2] https://git.savannah.nongnu.org/cgit/dmidecode.git/tree/dmidecode.c#n347
Fixes: 628c3bb40e ("LoongArch: Add boot and setup routines")
Reviewed-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
1, We assume arch/loongarch/include/asm/smp.h be included in include/
linux/smp.h is valid and the reverse inclusion isn't. So remove the
<linux/smp.h> in arch/loongarch/include/asm/smp.h.
2, arch/loongarch/include/asm/smp.h is only needed when CONFIG_SMP,
and setup.c include it only because it need plat_smp_setup(). So,
reorganize setup.c & smp.h, and then remove <asm/smp.h> in setup.c.
3, Fix cacheinfo.c and percpu.h build error by adding the missing header
files when !CONFIG_SMP.
4, Fix acpi.c build error by adding CONFIG_SMP guards.
5, Move irq_stat definition from smp.c to irq.c and fix its declaration.
6, Select CONFIG_SMP for CONFIG_NUMA, similar as other architectures do.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Add Non-Uniform Memory Access (NUMA) support for LoongArch. LoongArch
has 48-bit physical address, but the HyperTransport I/O bus only support
40-bit address, so we need a custom phys_to_dma() and dma_to_phys() to
extract the 4-bit node id (bit 44~47) from Loongson-3's 48-bit physical
address space and embed it into 40-bit. In the 40-bit dma address, node
id offset can be read from the LS7A_DMA_CFG register.
Reviewed-by: WANG Xuerui <git@xen0n.name>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
LoongArch-based procesors have 4, 8 or 16 cores per package. This patch
adds multi-processor (SMP) support for LoongArch.
Reviewed-by: WANG Xuerui <git@xen0n.name>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Add basic boot, setup and reset routines for LoongArch. Now, LoongArch
machines use UEFI-based firmware. The firmware passes configuration
information to the kernel via ACPI and DMI/SMBIOS.
Currently an existing interface between the kernel and the bootloader
is implemented. Kernel gets 2 values from the bootloader, passed in
registers a0 and a1; a0 is an "EFI boot flag" distinguishing UEFI and
non-UEFI firmware, while a1 is a pointer to an FDT with systable,
memmap, cmdline and initrd information.
The standard UEFI boot protocol (EFISTUB) will be added later.
Cc: linux-efi@vger.kernel.org
Cc: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: WANG Xuerui <git@xen0n.name>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Co-developed-by: Yun Liu <liuyun@loongson.cn>
Signed-off-by: Yun Liu <liuyun@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Alexei Starovoitov