Since commit ba69cd122e ("xprtrdma: Remove support for FMR memory
registration"), FRWR is the only supported memory registration mode.
We can take advantage of the asynchronous nature of FRWR's LOCAL_INV
Work Requests to get rid of the completion wait by having the
LOCAL_INV completion handler take care of DMA unmapping MRs and
waking the upper layer RPC waiter.
This eliminates two context switches when local invalidation is
necessary. As a side benefit, we will no longer need the per-xprt
deferred completion work queue.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
When a marshal operation fails, any MRs that were already set up for
that request are recycled. Recycling releases MRs and creates new
ones, which is expensive.
Since commit f287762308 ("xprtrdma: Chain Send to FastReg WRs")
was merged, recycling FRWRs is unnecessary. This is because before
that commit, frwr_map had already posted FAST_REG Work Requests,
so ownership of the MRs had already been passed to the NIC and thus
dealing with them had to be delayed until they completed.
Since that commit, however, FAST_REG WRs are posted at the same time
as the Send WR. This means that if marshaling fails, we are certain
the MRs are safe to simply unmap and place back on the free list
because neither the Send nor the FAST_REG WRs have been posted yet.
The kernel still has ownership of the MRs at this point.
This reduces the total number of MRs that the xprt has to create
under heavy workloads and makes the marshaling logic less brittle.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Now that both the Send and Receive completions are handled in
process context, it is safe to DMA unmap and return MRs to the
free or recycle lists directly in the completion handlers.
Doing this means rpcrdma_frwr no longer needs to track the state of
each MR, meaning that a VALID or FLUSHED MR can no longer appear on
an xprt's MR free list. Thus there is no longer a need to track the
MR's registration state in rpcrdma_frwr.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Commit 9590d083c1 ("xprtrdma: Use xprt_pin_rqst in
rpcrdma_reply_handler") pins incoming RPC/RDMA replies so they
can be left in the pending requests queue while they are being
processed without introducing a race between ->buf_free and the
transport's reply handler. Therefore RPCRDMA_REQ_F_PENDING is no
longer necessary.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Under high I/O workloads, I've noticed that an RPC/RDMA transport
occasionally deadlocks (IOPS goes to zero, and doesn't recover).
Diagnosis shows that the sendctx queue is empty, but when sendctxs
are returned to the queue, the xprt_write_space wake-up never
occurs. The wake-up logic in rpcrdma_sendctx_put_locked is racy.
I noticed that both EMPTY_SCQ and XPRT_WRITE_SPACE are implemented
via an atomic bit. Just one of those is sufficient. Removing
EMPTY_SCQ in favor of the generic bit mechanism makes the deadlock
un-reproducible.
Without EMPTY_SCQ, rpcrdma_buffer::rb_flags is no longer used and
is therefore removed.
Unfortunately this patch does not apply cleanly to stable. If
needed, someone will have to port it and test it.
Fixes: 2fad659209 ("xprtrdma: Wait on empty sendctx queue")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
This is a latent bug. xdr_stream_pos works by subtracting
xdr_stream::nwords from xdr_buf::len. But xdr_stream::nwords is not
initialized by xdr_init_encode().
It works today only because all fields in rpcrdma_req::rl_stream
are initialized to zero by rpcrdma_req_create, making the
subtraction in xdr_stream_pos always a no-op.
I found this issue via code inspection. It was introduced by commit
39f4cd9e99 ("xprtrdma: Harden chunk list encoding against send
buffer overflow"), but the code has changed enough since then that
this fix can't be automatically applied to stable.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
failures on high-memory machines and fixing the DRC over RDMA.
-----BEGIN PGP SIGNATURE-----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=f2gw
-----END PGP SIGNATURE-----
Merge tag 'nfsd-5.2-2' of git://linux-nfs.org/~bfields/linux
Pull nfsd fixes from Bruce Fields:
"Two more quick bugfixes for nfsd: fixing a regression causing mount
failures on high-memory machines and fixing the DRC over RDMA"
* tag 'nfsd-5.2-2' of git://linux-nfs.org/~bfields/linux:
nfsd: Fix overflow causing non-working mounts on 1 TB machines
svcrdma: Ignore source port when computing DRC hash
Dereference wr->next /before/ the memory backing wr has been
released. This issue was found by code inspection. It is not
expected to be a significant problem because it is in an error
path that is almost never executed.
Fixes: 7c8d9e7c88 ("xprtrdma: Move Receive posting to ... ")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
sg_alloc_table_chained() currently allows the caller to provide one
preallocated SGL and returns if the requested number isn't bigger than
size of that SGL. This is used to inline an SGL for an IO request.
However, scattergather code only allows that size of the 1st preallocated
SGL to be SG_CHUNK_SIZE(128). This means a substantial amount of memory
(4KB) is claimed for the SGL for each IO request. If the I/O is small, it
would be prudent to allocate a smaller SGL.
Introduce an extra parameter to sg_alloc_table_chained() and
sg_free_table_chained() for specifying size of the preallocated SGL.
Both __sg_free_table() and __sg_alloc_table() assume that each SGL has the
same size except for the last one. Change the code to allow both functions
to accept a variable size for the 1st preallocated SGL.
[mkp: attempted to clarify commit desc]
Cc: Christoph Hellwig <hch@lst.de>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Ewan D. Milne <emilne@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: netdev@vger.kernel.org
Cc: linux-nvme@lists.infradead.org
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The DRC appears to be effectively empty after an RPC/RDMA transport
reconnect. The problem is that each connection uses a different
source port, which defeats the DRC hash.
Clients always have to disconnect before they send retransmissions
to reset the connection's credit accounting, thus every retransmit
on NFS/RDMA will miss the DRC.
An NFS/RDMA client's IP source port is meaningless for RDMA
transports. The transport layer typically sets the source port value
on the connection to a random ephemeral port. The server already
ignores it for the "secure port" check. See commit 16e4d93f6d
("NFSD: Ignore client's source port on RDMA transports").
The Linux NFS server's DRC resolves XID collisions from the same
source IP address by using the checksum of the first 200 bytes of
the RPC call header.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: stable@vger.kernel.org # v4.14+
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along
with memory for some number of elements for that array. For example:
struct foo {
int stuff;
struct boo entry[];
};
instance = kzalloc(sizeof(struct foo) + count * sizeof(struct boo), GFP_KERNEL);
Instead of leaving these open-coded and prone to type mistakes, we can
now use the new struct_size() helper:
instance = kzalloc(struct_size(instance, entry, count), GFP_KERNEL);
This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
The comment hasn't been accurate for several years.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Commit e1ede312f1 ("xprtrdma: Fix helper that drains the
transport") replaced the ib_drain_qp() call, so update documenting
comments to reflect current operation.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: rely on the trace points instead.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up.
Move the remaining field in rpcrdma_create_data_internal so the
structure can be removed.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up.
The inline settings are actually a characteristic of the endpoint,
and not related to the device. They are also modified after the
transport instance is created, so they do not belong in the cdata
structure either.
Lastly, let's use names that are more natural to RDMA than to NFS:
inline_write -> inline_send and inline_read -> inline_recv. The
/proc files retain their names to avoid breaking user space.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up.
xprt_rdma_max_inline_{read,write} cannot be set to large values
by virtue of proc_dointvec_minmax. The current maximum is
RPCRDMA_MAX_INLINE, which is much smaller than RPCRDMA_MAX_SEGS *
PAGE_SIZE.
The .rsize and .wsize fields are otherwise unused in the current
code base, and thus can be removed.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up.
Since commit 54cbd6b0c6 ("xprtrdma: Delay DMA mapping Send and
Receive buffers"), a pointer to the device is now saved in each
regbuf when it is DMA mapped.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Instead of using a fixed number, allow the amount of Send completion
batching to vary based on the client's maximum credit limit.
- A larger default gives a small boost to IOPS throughput
- Reducing it based on max_requests gives a safe result when the
max credit limit is cranked down (eg. when the device has a small
max_qp_wr).
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Minor clean-ups I've stumbled on since sendctx was merged last year.
In particular, making Send completion processing more efficient
appears to have a measurable impact on IOPS throughput.
Note: test_and_clear_bit() returns a value, thus an explicit memory
barrier is not necessary.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Record an event when rpcrdma_marshal_req returns a non-zero return
value to help track down why an xprt close might have occurred.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Reflects the change introduced in commit 067c469671 ("NFSv4.1:
Bump the default callback session slot count to 16").
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
The Receive handler runs in process context, thus can use on-demand
GFP_KERNEL allocations instead of pre-allocation.
This makes the xprtrdma backchannel independent of the number of
backchannel session slots provisioned by the Upper Layer protocol.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
For code legibility, clean up the function names to be consistent
with the pattern: "rpcrdma" _ object-type _ action
Also rpcrdma_regbuf_alloc and rpcrdma_regbuf_free no longer have any
callers outside of verbs.c, and can thus be made static.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up by providing an API to do this common task.
At this point, the difference between rpcrdma_get_sendbuf and
rpcrdma_get_recvbuf has become tiny. These can be collapsed into a
single helper.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Allocating an rpcrdma_req's regbufs at xprt create time enables
a pair of micro-optimizations:
First, if these regbufs are always there, we can eliminate two
conditional branches from the hot xprt_rdma_allocate path.
Second, by allocating a 1KB buffer, it places a lower bound on the
size of these buffers, without adding yet another conditional
branch. The lower bound reduces the number of hardway re-
allocations. In fact, for some workloads it completely eliminates
hardway allocations.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Allocate the struct rpcrdma_regbuf separately from the I/O buffer
to better guarantee the alignment of the I/O buffer and eliminate
the wasted space between the rpcrdma_regbuf metadata and the buffer
itself.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
For code legibility, clean up the function names to be consistent
with the pattern: "rpcrdma" _ object-type _ action
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Eventually, I'd like to invoke rpcrdma_create_req() during the
call_reserve step. Memory allocation there probably needs to use
GFP_NOIO. Therefore a set of GFP flags needs to be passed in.
As an additional clean up, just return a pointer or NULL, because
the only error return code here is -ENOMEM.
Lastly, clean up the function names to be consistent with the
pattern: "rpcrdma" _ object-type _ action
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
After a DMA map failure in frwr_map, mark the MR so that recycling
won't attempt to DMA unmap it.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Fixes: e2f34e2671 ("xprtrdma: Yet another double DMA-unmap")
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Page allocation requests made when the SPARSE_PAGES flag is set are
allowed to fail, and are not critical. No need to spend a rare
resource.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Convert the transport callback to actually put the request to sleep
instead of just setting a timeout. This is in preparation for
rpc_sleep_on_timeout().
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
We want to drain only the RQ first. Otherwise the transport can
deadlock on ->close if there are outstanding Send completions.
Fixes: 6d2d0ee27c ("xprtrdma: Replace rpcrdma_receive_wq ... ")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: stable@vger.kernel.org # v5.0+
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
that could artificially limit NFSv4.1 performance by limiting the number
of oustanding rpcs from a single client. Neil Brown also gets a special
mention for fixing a 14.5-year-old memory-corruption bug in the encoding
of NFSv3 readdir responses.
-----BEGIN PGP SIGNATURE-----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=ntUa
-----END PGP SIGNATURE-----
Merge tag 'nfsd-5.1' of git://linux-nfs.org/~bfields/linux
Pull NFS server updates from Bruce Fields:
"Miscellaneous NFS server fixes.
Probably the most visible bug is one that could artificially limit
NFSv4.1 performance by limiting the number of oustanding rpcs from a
single client.
Neil Brown also gets a special mention for fixing a 14.5-year-old
memory-corruption bug in the encoding of NFSv3 readdir responses"
* tag 'nfsd-5.1' of git://linux-nfs.org/~bfields/linux:
nfsd: allow nfsv3 readdir request to be larger.
nfsd: fix wrong check in write_v4_end_grace()
nfsd: fix memory corruption caused by readdir
nfsd: fix performance-limiting session calculation
svcrpc: fix UDP on servers with lots of threads
svcrdma: Remove syslog warnings in work completion handlers
svcrdma: Squelch compiler warning when SUNRPC_DEBUG is disabled
svcrdma: Use struct_size() in kmalloc()
svcrpc: fix unlikely races preventing queueing of sockets
svcrpc: svc_xprt_has_something_to_do seems a little long
SUNRPC: Don't allow compiler optimisation of svc_xprt_release_slot()
nfsd: fix an IS_ERR() vs NULL check
- Make sure Send CQ is allocated on an existing compvec
- Properly check debugfs dentry before using it
- Don't use page_file_mapping() after removing a page
-----BEGIN PGP SIGNATURE-----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=28v+
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-5.0-4' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull more NFS client fixes from Anna Schumaker:
"Three fixes this time.
Nicolas's is for xprtrdma completion vector allocation on single-core
systems. Greg's adds an error check when allocating a debugfs dentry.
And Ben's is an additional fix for nfs_page_async_flush() to prevent
pages from accidentally getting truncated.
Summary:
- Make sure Send CQ is allocated on an existing compvec
- Properly check debugfs dentry before using it
- Don't use page_file_mapping() after removing a page"
* tag 'nfs-for-5.0-4' of git://git.linux-nfs.org/projects/anna/linux-nfs:
NFS: Don't use page_file_mapping after removing the page
rpc: properly check debugfs dentry before using it
xprtrdma: Make sure Send CQ is allocated on an existing compvec
tsh_size was added to accommodate transports that send a pre-amble
before each RPC message. However, this assumes the pre-amble is
fixed in size, which isn't true for some transports. That makes
tsh_size not very generic.
Also I'd like to make the estimation of RPC send and receive
buffer sizes more precise. tsh_size doesn't currently appear to be
accounted for at all by call_allocate.
Therefore let's just remove the tsh_size concept, and make the only
transports that have a non-zero tsh_size employ a direct approach.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Having access to the controlling rpc_rqst means a trace point in the
XDR code can report:
- the XID
- the task ID and client ID
- the p_name of RPC being processed
Subsequent patches will introduce such trace points.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Post RECV WRs in batches to reduce the hardware doorbell rate per
transport. This helps the RPC-over-RDMA client scale better in
number of transports.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
In very rare cases, an NFS READ operation might predict that the
non-payload part of the RPC Call is large. For instance, an
NFSv4 COMPOUND with a large GETATTR result, in combination with a
large Kerberos credential, could push the non-payload part to be
several kilobytes.
If the non-payload part is larger than the connection's inline
threshold, the client is required to provision a Reply chunk. The
current Linux client does not check for this case. There are two
obvious ways to handle it:
a. Provision a Write chunk for the payload and a Reply chunk for
the non-payload part
b. Provision a Reply chunk for the whole RPC Reply
Some testing at a recent NFS bake-a-thon showed that servers can
mostly handle a. but there are some corner cases that do not work
yet. b. already works (it has to, to handle krb5i/p), but could be
somewhat less efficient. However, I expect this scenario to be very
rare -- no-one has reported a problem yet.
So I'm going to implement b. Sometime later I will provide some
patches to help make b. a little more efficient by more carefully
choosing the Reply chunk's segment sizes to ensure the payload is
optimally aligned.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Make sure the device has at least 2 completion vectors
before allocating to compvec#1
Fixes: a4699f5647 (xprtrdma: Put Send CQ in IB_POLL_WORKQUEUE mode)
Signed-off-by: Nicolas Morey-Chaisemartin <nmoreychaisemartin@suse.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
These can result in a lot of log noise, and are able to be triggered
by client misbehavior. Since there are trace points in these
handlers now, there's no need to spam the log.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
CC [M] net/sunrpc/xprtrdma/svc_rdma_transport.o
linux/net/sunrpc/xprtrdma/svc_rdma_transport.c: In function ‘svc_rdma_accept’:
linux/net/sunrpc/xprtrdma/svc_rdma_transport.c:452:19: warning: variable ‘sap’ set but not used [-Wunused-but-set-variable]
struct sockaddr *sap;
^
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along
with memory for some number of elements for that array. For example:
struct foo {
int stuff;
struct boo entry[];
};
instance = kmalloc(sizeof(struct foo) + count * sizeof(struct boo), GFP_KERNEL);
Instead of leaving these open-coded and prone to type mistakes, we can
now use the new struct_size() helper:
instance = kmalloc(struct_size(instance, entry, count), GFP_KERNEL);
This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
In the rpc server, When something happens that might be reason to wake
up a thread to do something, what we do is
- modify xpt_flags, sk_sock->flags, xpt_reserved, or
xpt_nr_rqsts to indicate the new situation
- call svc_xprt_enqueue() to decide whether to wake up a thread.
svc_xprt_enqueue may require multiple conditions to be true before
queueing up a thread to handle the xprt. In the SMP case, one of the
other CPU's may have set another required condition, and in that case,
although both CPUs run svc_xprt_enqueue(), it's possible that neither
call sees the writes done by the other CPU in time, and neither one
recognizes that all the required conditions have been set. A socket
could therefore be ignored indefinitely.
Add memory barries to ensure that any svc_xprt_enqueue() call will
always see the conditions changed by other CPUs before deciding to
ignore a socket.
I've never seen this race reported. In the unlikely event it happens,
another event will usually come along and the problem will fix itself.
So I don't think this is worth backporting to stable.
Chuck tried this patch and said "I don't see any performance
regressions, but my server has only a single last-level CPU cache."
Tested-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Two and a half years ago, the client was changed to use gathered
Send for larger inline messages, in commit 655fec6987 ("xprtrdma:
Use gathered Send for large inline messages"). Several fixes were
required because there are a few in-kernel device drivers whose
max_sge is 3, and these were broken by the change.
Apparently my memory is going, because some time later, I submitted
commit 25fd86eca1 ("svcrdma: Don't overrun the SGE array in
svc_rdma_send_ctxt"), and after that, commit f3c1fd0ee2 ("svcrdma:
Reduce max_send_sges"). These too incorrectly assumed in-kernel
device drivers would have more than a few Send SGEs available.
The fix for the server side is not the same. This is because the
fundamental problem on the server is that, whether or not the client
has provisioned a chunk for the RPC reply, the server must squeeze
even the most complex RPC replies into a single RDMA Send. Failing
in the send path because of Send SGE exhaustion should never be an
option.
Therefore, instead of failing when the send path runs out of SGEs,
switch to using a bounce buffer mechanism to handle RPC replies that
are too complex for the device to send directly. That allows us to
remove the max_sge check to enable drivers with small max_sge to
work again.
Reported-by: Don Dutile <ddutile@redhat.com>
Fixes: 25fd86eca1 ("svcrdma: Don't overrun the SGE array in ...")
Cc: stable@vger.kernel.org
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The clean up is handled by the caller, rpcrdma_buffer_create(), so this
call to rpcrdma_sendctxs_destroy() leads to a double free.
Fixes: ae72950abf ("xprtrdma: Add data structure to manage RDMA Send arguments")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
This should return -ENOMEM if __alloc_workqueue_key() fails, but it
returns success.
Fixes: 6d2d0ee27c ("xprtrdma: Replace rpcrdma_receive_wq with a per-xprt workqueue")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Note that there is a conflict with the rdma tree in this pull request, since
we delete a file that has been changed in the rdma tree. Hopefully that's
easy enough to resolve!
We also were unable to track down a maintainer for Neil Brown's changes to
the generic cred code that are prerequisites to his RPC cred cleanup patches.
We've been asking around for several months without any response, so
hopefully it's okay to include those patches in this pull request.
Stable bugfixes:
- xprtrdma: Yet another double DMA-unmap # v4.20
Features:
- Allow some /proc/sys/sunrpc entries without CONFIG_SUNRPC_DEBUG
- Per-xprt rdma receive workqueues
- Drop support for FMR memory registration
- Make port= mount option optional for RDMA mounts
Other bugfixes and cleanups:
- Remove unused nfs4_xdev_fs_type declaration
- Fix comments for behavior that has changed
- Remove generic RPC credentials by switching to 'struct cred'
- Fix crossing mountpoints with different auth flavors
- Various xprtrdma fixes from testing and auditing the close code
- Fixes for disconnect issues when using xprtrdma with krb5
- Clean up and improve xprtrdma trace points
- Fix NFS v4.2 async copy reboot recovery
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEnZ5MQTpR7cLU7KEp18tUv7ClQOsFAlwtO50ACgkQ18tUv7Cl
QOtZWQ//e5Hhp2TnQZ6U+99YKedjwBHP6psH3GKSEdeHSNdlSpZ5ckgHxvMb9TBa
6t4ecgv5P/uYLIePQ0u2ubUFc9+TlyGi7Iacx13/YhK7kihGHDPnZhfl0QbYixV7
rwa9bFcKmOrXs8ld+Hw3P2UL22G1gMf/LHDhPNshbW7LFZmcshKz+mKTk70kwkq9
v7tFC59p6GwV8Sr2YI2NXn2fOWsUS00sQfgj2jceJYJ8PsNa+wHYF4wPj2IY5NsE
D5Oq2kLPbytBhCllOHgopNZaf4qb5BfqhVETyc1O+kDF3BZKUhQ1PoDi2FPinaHM
5/d8hS+5fr3eMBsQrPWQLXYjWQFUXnkQQJvU3Bo52AIgomsk/8uBq3FvH7XmFcBd
C8sgnuUAkAS8feMes8GCS50BTxclnGuYGdyFJyCRXoG9Kn9rMrw9EKitky6EVq0v
NmXhW79jK84a3yDXVlAIpZ8Y9BU/HQ3GviGX8lQEdZU9YiYRzDIHvpMFwzMgqaBi
XvLbr8PlLOm8GZokThS8QYT/G2Wu6IwfUq/AufVjVD4+HiL3duKKfWSGAvcm6aAa
GoRF6UG+OmjWlzKojtRc1dI+sy22Fzh+DW+Mx6tuf/b/66wkmYnW7eKcV4rt6Tm5
/JEhvTMo9q7elL/4FgCoMCcdoc5eXqQyXRXrQiOU7YHLzn2aWU0=
=DvVW
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-4.21-1' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client updates from Anna Schumaker:
"Stable bugfixes:
- xprtrdma: Yet another double DMA-unmap # v4.20
Features:
- Allow some /proc/sys/sunrpc entries without CONFIG_SUNRPC_DEBUG
- Per-xprt rdma receive workqueues
- Drop support for FMR memory registration
- Make port= mount option optional for RDMA mounts
Other bugfixes and cleanups:
- Remove unused nfs4_xdev_fs_type declaration
- Fix comments for behavior that has changed
- Remove generic RPC credentials by switching to 'struct cred'
- Fix crossing mountpoints with different auth flavors
- Various xprtrdma fixes from testing and auditing the close code
- Fixes for disconnect issues when using xprtrdma with krb5
- Clean up and improve xprtrdma trace points
- Fix NFS v4.2 async copy reboot recovery"
* tag 'nfs-for-4.21-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (63 commits)
sunrpc: convert to DEFINE_SHOW_ATTRIBUTE
sunrpc: Add xprt after nfs4_test_session_trunk()
sunrpc: convert unnecessary GFP_ATOMIC to GFP_NOFS
sunrpc: handle ENOMEM in rpcb_getport_async
NFS: remove unnecessary test for IS_ERR(cred)
xprtrdma: Prevent leak of rpcrdma_rep objects
NFSv4.2 fix async copy reboot recovery
xprtrdma: Don't leak freed MRs
xprtrdma: Add documenting comment for rpcrdma_buffer_destroy
xprtrdma: Replace outdated comment for rpcrdma_ep_post
xprtrdma: Update comments in frwr_op_send
SUNRPC: Fix some kernel doc complaints
SUNRPC: Simplify defining common RPC trace events
NFS: Fix NFSv4 symbolic trace point output
xprtrdma: Trace mapping, alloc, and dereg failures
xprtrdma: Add trace points for calls to transport switch methods
xprtrdma: Relocate the xprtrdma_mr_map trace points
xprtrdma: Clean up of xprtrdma chunk trace points
xprtrdma: Remove unused fields from rpcrdma_ia
xprtrdma: Cull dprintk() call sites
...
NFSv4.2 client, and cleaning up some convoluted backchannel server code
in the process. Otherwise, miscellaneous smaller bugfixes and cleanup.
-----BEGIN PGP SIGNATURE-----
iQIcBAABAgAGBQJcLR3nAAoJECebzXlCjuG+oyAQALrPSTH9Qg2AwP2eGm+AevUj
u/VFmimImIO9dYuT02t4w42w4qMIQ0/Y7R0UjT3DxG5Oixy/zA+ZaNXCCEKwSMIX
abGF4YalUISbDc6n0Z8J14/T33wDGslhy3IQ9Jz5aBCDCocbWlzXvFlmrowbb3ak
vtB0Fc3Xo6Z/Pu2GzNzlqR+f69IAmwQGJrRrAEp3JUWSIBKiSWBXTujDuVBqJNYj
ySLzbzyAc7qJfI76K635XziULR2ueM3y5JbPX7kTZ0l3OJ6Yc0PtOj16sIv5o0XK
DBYPrtvw3ZbxQE/bXqtJV9Zn6MG5ODGxKszG1zT1J3dzotc9l/LgmcAY8xVSaO+H
QNMdU9QuwmyUG20A9rMoo/XfUb5KZBHzH7HIYOmkfBidcaygwIInIKoIDtzimm4X
OlYq3TL/3QDY6rgTCZv6n2KEnwiIDpc5+TvFhXRWclMOJMcMSHJfKFvqERSv9V3o
90qrCebPA0K8Dnc0HMxcBXZ+0TqZ2QeXp/wfIjibCXqMwlg+BZhmbeA0ngZ7x7qf
2F33E9bfVJjL+VI5FcVYQf43bOTWZgD6ZKGk4T7keYl0CPH+9P70bfhl4KKy9dqc
GwYooy/y5FPb2CvJn/EETeILRJ9OyIHUrw7HBkpz9N8n9z+V6Qbp9yW7LKgaMphW
1T+GpHZhQjwuBPuJhDK0
=dRLp
-----END PGP SIGNATURE-----
Merge tag 'nfsd-4.21' of git://linux-nfs.org/~bfields/linux
Pull nfsd updates from Bruce Fields:
"Thanks to Vasily Averin for fixing a use-after-free in the
containerized NFSv4.2 client, and cleaning up some convoluted
backchannel server code in the process.
Otherwise, miscellaneous smaller bugfixes and cleanup"
* tag 'nfsd-4.21' of git://linux-nfs.org/~bfields/linux: (25 commits)
nfs: fixed broken compilation in nfs_callback_up_net()
nfs: minor typo in nfs4_callback_up_net()
sunrpc: fix debug message in svc_create_xprt()
sunrpc: make visible processing error in bc_svc_process()
sunrpc: remove unused xpo_prep_reply_hdr callback
sunrpc: remove svc_rdma_bc_class
sunrpc: remove svc_tcp_bc_class
sunrpc: remove unused bc_up operation from rpc_xprt_ops
sunrpc: replace svc_serv->sv_bc_xprt by boolean flag
sunrpc: use-after-free in svc_process_common()
sunrpc: use SVC_NET() in svcauth_gss_* functions
nfsd: drop useless LIST_HEAD
lockd: Show pid of lockd for remote locks
NFSD remove OP_CACHEME from 4.2 op_flags
nfsd: Return EPERM, not EACCES, in some SETATTR cases
sunrpc: fix cache_head leak due to queued request
nfsd: clean up indentation, increase indentation in switch statement
svcrdma: Optimize the logic that selects the R_key to invalidate
nfsd: fix a warning in __cld_pipe_upcall()
nfsd4: fix crash on writing v4_end_grace before nfsd startup
...
If a reply has been processed but the RPC is later retransmitted
anyway, the req->rl_reply field still contains the only pointer to
the old rpcrdma rep. When the next reply comes in, the reply handler
will stomp on the rl_reply field, leaking the old rep.
A trace event is added to capture such leaks.
This problem seems to be worsened by the restructuring of the RPC
Call path in v4.20. Fully addressing this issue will require at
least a re-architecture of the disconnect logic, which is not
appropriate during -rc.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Defensive clean up. Don't set frwr->fr_mr until we know that the
scatterlist allocation has succeeded.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Make a note of the function's dependency on an earlier ib_drain_qp.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Since commit 7c8d9e7c88 ("xprtrdma: Move Receive posting to
Receive handler"), rpcrdma_ep_post is no longer responsible for
posting Receive buffers. Update the documenting comment to reflect
this change.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Commit f287762308 ("xprtrdma: Chain Send to FastReg WRs") was
written before commit ce5b371782 ("xprtrdma: Replace all usage of
"frmr" with "frwr""), but was merged afterwards. Thus it still
refers to FRMR and MWs.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
These are rare, but can be helpful at tracking down DMAR and other
problems.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Name them "trace_xprtrdma_op_*" so they can be easily enabled as a
group. No trace point is added where the generic layer already has
observability.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
The mr_map trace points were capturing information about the previous
use of the MR rather than about the segment that was just mapped.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
The chunk-related trace points capture nearly the same information
as the MR-related trace points.
Also, rename them so globbing can be used to enable or disable
these trace points more easily.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up. The last use of these fields was in commit 173b8f49b3
("xprtrdma: Demote "connect" log messages") .
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: Remove dprintk() call sites that report rare or impossible
errors. Leave a few that display high-value low noise status
information.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: There's little chance of contention between the use of
rb_lock and rb_reqslock, so merge the two. This avoids having to
take both in some (possibly future) cases.
Transport tear-down is already serialized, thus there is no need for
locking at all when destroying rpcrdma_reqs.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
For better observability of parsing errors, return the error code
generated in the decoders to the upper layer consumer.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Since commit ffe1f0df58 ("rpcrdma: Merge svcrdma and xprtrdma
modules into one"), the forward and backchannel components are part
of the same kernel module. A separate request_module() call in the
backchannel code is no longer necessary.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Commit 431f6eb357 ("SUNRPC: Add a label for RPC calls that require
allocation on receive") didn't update similar logic in rpc_rdma.c.
I don't think this is a bug, per-se; the commit just adds more
careful checking for broken upper layer behavior.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Place the associated RPC transaction's XID in the upper 32 bits of
each RDMA segment's rdma_offset field. There are two reasons to do
this:
- The R_key only has 8 bits that are different from registration to
registration. The XID adds more uniqueness to each RDMA segment to
reduce the likelihood of a software bug on the server reading from
or writing into memory it's not supposed to.
- On-the-wire RDMA Read and Write requests do not otherwise carry
any identifier that matches them up to an RPC. The XID in the
upper 32 bits will act as an eye-catcher in network captures.
Suggested-by: Tom Talpey <ttalpey@microsoft.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: Now that there is only FRWR, there is no need for a memory
registration switch. The indirect calls to the memreg operations can
be replaced with faster direct calls.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
FMR is not supported on most recent RDMA devices. It is also less
secure than FRWR because an FMR memory registration can expose
adjacent bytes to remote reading or writing. As discussed during the
RDMA BoF at LPC 2018, it is time to remove support for FMR in the
NFS/RDMA client stack.
Note that NFS/RDMA server-side uses either local memory registration
or FRWR. FMR is not used.
There are a few Infiniband/RoCE devices in the kernel tree that do
not appear to support MEM_MGT_EXTENSIONS (FRWR), and therefore will
not support client-side NFS/RDMA after this patch. These are:
- mthca
- qib
- hns (RoCE)
Users of these devices can use NFS/TCP on IPoIB instead.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Some devices advertise a large max_fast_reg_page_list_len
capability, but perform optimally when MRs are significantly smaller
than that depth -- probably when the MR itself is no larger than a
page.
By default, the RDMA R/W core API uses max_sge_rd as the maximum
page depth for MRs. For some devices, the value of max_sge_rd is
1, which is also not optimal. Thus, when max_sge_rd is larger than
1, use that value. Otherwise use the value of the
max_fast_reg_page_list_len attribute.
I've tested this with CX-3 Pro, FastLinq, and CX-5 devices. It
reproducibly improves the throughput of large I/Os by several
percent.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
With certain combinations of krb5i/p, MR size, and r/wsize, I/O can
fail with EMSGSIZE. This is because the calculated value of
ri_max_segs (the max number of MRs per RPC) exceeded
RPCRDMA_MAX_HDR_SEGS, which caused Read or Write list encoding to
walk off the end of the transport header.
Once that was addressed, the ro_maxpages result has to be corrected
to account for the number of MRs needed for Reply chunks, which is
2 MRs smaller than a normal Read or Write chunk.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Transport disconnect processing does a "wake pending tasks" at
various points.
Suppose an RPC Reply is being processed. The RPC task that Reply
goes with is waiting on the pending queue. If a disconnect wake-up
happens before reply processing is done, that reply, even if it is
good, is thrown away, and the RPC has to be sent again.
This window apparently does not exist for socket transports because
there is a lock held while a reply is being received which prevents
the wake-up call until after reply processing is done.
To resolve this, all RPC replies being processed on an RPC-over-RDMA
transport have to complete before pending tasks are awoken due to a
transport disconnect.
Callers that already hold the transport write lock may invoke
->ops->close directly. Others use a generic helper that schedules
a close when the write lock can be taken safely.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
After thinking about this more, and auditing other kernel ULP imple-
mentations, I believe that a DISCONNECT cm_event will occur after a
fatal QP event. If that's the case, there's no need for an explicit
disconnect in the QP event handler.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
To address a connection-close ordering problem, we need the ability
to drain the RPC completions running on rpcrdma_receive_wq for just
one transport. Give each transport its own RPC completion workqueue,
and drain that workqueue when disconnecting the transport.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: Divide the work cleanly:
- rpcrdma_wc_receive is responsible only for RDMA Receives
- rpcrdma_reply_handler is responsible only for RPC Replies
- the posted send and receive counts both belong in rpcrdma_ep
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
The recovery case in frwr_op_unmap_sync needs to DMA unmap each MR.
frwr_release_mr does not DMA-unmap, but the recycle worker does.
Fixes: 61da886bf7 ("xprtrdma: Explicitly resetting MRs is ... ")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
While chasing yet another set of DMAR fault reports, I noticed that
the frwr recycler conflates whether or not an MR has been DMA
unmapped with frwr->fr_state. Actually the two have only an indirect
relationship. It's in fact impossible to guess reliably whether the
MR has been DMA unmapped based on its fr_state field, especially as
the surrounding code and its assumptions have changed over time.
A better approach is to track the DMA mapping status explicitly so
that the recycler is less brittle to unexpected situations, and
attempts to DMA-unmap a second time are prevented.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: stable@vger.kernel.org # v4.20
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
xpo_prep_reply_hdr are not used now.
It was defined for tcp transport only, however it cannot be
called indirectly, so let's move it to its caller and
remove unused callback.
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Remove svc_xprt_class svc_rdma_bc_class and related functions.
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
svc_serv-> sv_bc_xprt is netns-unsafe and cannot be used as pointer.
To prevent its misuse in future it is replaced by new boolean flag.
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Make all the required change to start use the ib_device_ops structure.
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
o Select the R_key to invalidate while the CPU cache still contains
the received RPC Call transport header, rather than waiting until
we're about to send the RPC Reply.
o Choose Send With Invalidate if there is exactly one distinct R_key
in the received transport header. If there's more than one, the
client will have to perform local invalidation after it has
already waited for remote invalidation.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
already supported COPY, by copying a limited amount of data and then
returning a short result, letting the client resend. The asynchronous
protocol should offer better performance at the expense of some
complexity.
The other highlight is Trond's work to convert the duplicate reply cache
to a red-black tree, and to move it and some other server caches to RCU.
(Previously these have meant taking global spinlocks on every RPC.)
Otherwise, some RDMA work and miscellaneous bugfixes.
-----BEGIN PGP SIGNATURE-----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=TTo0
-----END PGP SIGNATURE-----
Merge tag 'nfsd-4.20' of git://linux-nfs.org/~bfields/linux
Pull nfsd updates from Bruce Fields:
"Olga added support for the NFSv4.2 asynchronous copy protocol. We
already supported COPY, by copying a limited amount of data and then
returning a short result, letting the client resend. The asynchronous
protocol should offer better performance at the expense of some
complexity.
The other highlight is Trond's work to convert the duplicate reply
cache to a red-black tree, and to move it and some other server caches
to RCU. (Previously these have meant taking global spinlocks on every
RPC)
Otherwise, some RDMA work and miscellaneous bugfixes"
* tag 'nfsd-4.20' of git://linux-nfs.org/~bfields/linux: (30 commits)
lockd: fix access beyond unterminated strings in prints
nfsd: Fix an Oops in free_session()
nfsd: correctly decrement odstate refcount in error path
svcrdma: Increase the default connection credit limit
svcrdma: Remove try_module_get from backchannel
svcrdma: Remove ->release_rqst call in bc reply handler
svcrdma: Reduce max_send_sges
nfsd: fix fall-through annotations
knfsd: Improve lookup performance in the duplicate reply cache using an rbtree
knfsd: Further simplify the cache lookup
knfsd: Simplify NFS duplicate replay cache
knfsd: Remove dead code from nfsd_cache_lookup
SUNRPC: Simplify TCP receive code
SUNRPC: Replace the cache_detail->hash_lock with a regular spinlock
SUNRPC: Remove non-RCU protected lookup
NFS: Fix up a typo in nfs_dns_ent_put
NFS: Lockless DNS lookups
knfsd: Lockless lookup of NFSv4 identities.
SUNRPC: Lockless server RPCSEC_GSS context lookup
knfsd: Allow lockless lookups of the exports
...
Since commit ffe1f0df58 ("rpcrdma: Merge svcrdma and xprtrdma
modules into one"), the forward and backchannel components are part
of the same kernel module. A separate try_module_get() call in the
backchannel code is no longer necessary.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Similar to a change made in the client's forward channel reply
handler: The xprt_release_rqst_cong() call is not necessary.
Also, release xprt->recv_lock when taking xprt->transport_lock
to avoid disabling and enabling BH's while holding another
spin lock.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
There's no need to request a large number of send SGEs because the
inline threshold already constrains the number of SGEs per Send.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Stable bugfixes:
- Reset credit grant properly after a disconnect
Other bugfixes and cleanups:
- xprt_release_rqst_cong is called outside of transport_lock
- Create more MRs at a time and toss out old ones during recovery
- Various improvements to the RDMA connection and disconnection code:
- Improve naming of trace events, functions, and variables
- Add documenting comments
- Fix metrics and stats reporting
- Fix a tracepoint sparse warning
-----BEGIN PGP SIGNATURE-----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=SxSD
-----END PGP SIGNATURE-----
Merge tag 'nfs-rdma-for-4.20-1' of git://git.linux-nfs.org/projects/anna/linux-nfs
NFS RDMA client updates for Linux 4.20
Stable bugfixes:
- Reset credit grant properly after a disconnect
Other bugfixes and cleanups:
- xprt_release_rqst_cong is called outside of transport_lock
- Create more MRs at a time and toss out old ones during recovery
- Various improvements to the RDMA connection and disconnection code:
- Improve naming of trace events, functions, and variables
- Add documenting comments
- Fix metrics and stats reporting
- Fix a tracepoint sparse warning
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Clean up: Use the appropriate C macro instead of open-coding
container_of() .
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: fill in or update documenting comments for transport
switch entry points.
For xprt_rdma_allocate:
The first paragraph is no longer true since commit 5a6d1db455
("SUNRPC: Add a transport-specific private field in rpc_rqst").
The second paragraph is no longer true since commit 54cbd6b0c6
("xprtrdma: Delay DMA mapping Send and Receive buffers").
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
To show that a caller did attempt to allocate and post more Receive
buffers, the trace point in rpcrdma_post_recvs() should report when
rpcrdma_post_recvs() was invoked but no new Receive buffers were
posted.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: rb_flags might be used for other things besides
RPCRDMA_BUF_F_EMPTY_SCQ, so initialize it in a generic spot
instead of in a send-completion-queue-related helper.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: This code was copied from xprtsock.c and
backchannel_rqst.c. For rpcrdma, the backchannel server runs
exclusively in process context, thus disabling bottom-halves is
unnecessary.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: Replace the hashed memory address of the target rpcrdma_ep
with the server's IP address and port. The server address is more
useful in an administrative error message.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: Use a function name that is consistent with the RDMA core
API and with other consumers. Because this is a function that is
invoked from outside the rpcrdma.ko module, add an appropriate
documenting comment.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Currently, when a connection is established, rpcrdma_conn_upcall
invokes rpcrdma_conn_func and then
wake_up_all(&ep->rep_connect_wait). The former wakes waiting RPCs,
but the connect worker is not done yet, and that leads to races,
double wakes, and difficulty understanding how this logic is
supposed to work.
Instead, collect all the "connection established" logic in the
connect worker (xprt_rdma_connect_worker). A disconnect worker is
retained to handle provider upcalls safely.
Fixes: 254f91e2fa ("xprtrdma: RPC/RDMA must invoke ... ")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: Eliminate the FALLTHROUGH into the default arm to make the
switch easier to understand.
Also, as long as I'm here, do not display the memory address of the
target rpcrdma_ep. A hashed memory address is of marginal use here.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up.
Since commit 173b8f49b3 ("xprtrdma: Demote "connect" log messages")
there has been no need to initialize connstat to zero. In fact, in
this code path there's now no reason not to set rep_connected
directly.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: The convention throughout other parts of xprtrdma is to
name variables of type struct rpcrdma_xprt "r_xprt", not "xprt".
This convention enables the use of the name "xprt" for a "struct
rpc_xprt" type variable, as in other parts of the RPC client.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: Use a function name that is consistent with the RDMA core
API and with other consumers. Because this is a function that is
invoked from outside the rpcrdma.ko module, add an appropriate
documenting comment.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
The way connection-oriented transports report connect_time is wrong:
it's supposed to be in seconds, not in jiffies.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
For TCP, the logic in xprt_connect_status is currently never invoked
to record a successful connection. Commit 2a4919919a ("SUNRPC:
Return EAGAIN instead of ENOTCONN when waking up xprt->pending")
changed the way TCP xprt's are awoken after a connect succeeds.
Instead, change connection-oriented transports to bump connect_count
and compute connect_time the moment that XPRT_CONNECTED is set.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up the names of trace events related to MRs so that it's
easy to enable these with a glob.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
When a memory operation fails, the MR's driver state might not match
its hardware state. The only reliable recourse is to dereg the MR.
This is done in ->ro_recover_mr, which then attempts to allocate a
fresh MR to replace the released MR.
Since commit e2ac236c0b ("xprtrdma: Allocate MRs on demand"),
xprtrdma dynamically allocates MRs. It can add more MRs whenever
they are needed.
That makes it possible to simply release an MR when a memory
operation fails, instead of "recovering" it. It will automatically
be replaced by the on-demand MR allocator.
This commit is a little larger than I wanted, but it replaces
->ro_recover_mr, rb_recovery_lock, rb_recovery_worker, and the
rb_stale_mrs list with a generic work queue.
Since MRs are no longer orphaned, the mrs_orphaned metric is no
longer used.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Some devices require more than 3 MRs to build a single 1MB I/O.
Ensure that rpcrdma_mrs_create() will add enough MRs to build that
I/O.
In a subsequent patch I'm changing the MR recovery logic to just
toss out the MRs. In that case it's possible for ->send_request to
loop acquiring some MRs, not getting enough, getting called again,
recycling the previous MRs, then not getting enough, lather rinse
repeat. Thus first we need to ensure enough MRs are created to
prevent that loop.
I'm "reusing" ia->ri_max_segs. All of its accessors seem to want the
maximum number of data segments plus two, so I'm going to bake that
into the initial calculation.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
On a fresh connection, an RPC/RDMA client is supposed to send only
one RPC Call until it gets a credit grant in the first RPC Reply
from the server [RFC 8166, Section 3.3.3].
There is a bug in the Linux client's credit accounting mechanism
introduced by commit e7ce710a88 ("xprtrdma: Avoid deadlock when
credit window is reset"). On connect, it simply dumps all pending
RPC Calls onto the new connection.
Servers have been tolerant of this bad behavior. Currently no server
implementation ever changes its credit grant over reconnects, and
servers always repost enough Receives before connections are fully
established.
To correct this issue, ensure that the client resets both the credit
grant _and_ the congestion window when handling a reconnect.
Fixes: e7ce710a88 ("xprtrdma: Avoid deadlock when credit ... ")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: stable@kernel.org
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Since commit ce7c252a8c ("SUNRPC: Add a separate spinlock to
protect the RPC request receive list") the RPC/RDMA reply handler
has been calling xprt_release_rqst_cong without holding
xprt->transport_lock.
I think the only way this call is ever made is if the credit grant
increases and there are RPCs pending. Current server implementations
do not change their credit grant during operation (except at
connect time).
Commit e7ce710a88 ("xprtrdma: Avoid deadlock when credit window is
reset") added the ->release_rqst call because UDP invokes
xprt_adjust_cwnd(), which calls __xprt_put_cong() after adjusting
xprt->cwnd. Both xprt_release() and ->xprt_release_xprt already wake
another task in this case, so it is safe to remove this call from
the reply handler.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Treat socket write space handling in the same way we now treat transport
congestion: by denying the XPRT_LOCK until the transport signals that it
has free buffer space.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Both RDMA and UDP transports require the request to get a "congestion control"
credit before they can be transmitted. Right now, this is done when
the request locks the socket. We'd like it to happen when a request attempts
to be transmitted for the first time.
In order to support retransmission of requests that already hold such
credits, we also want to ensure that they get queued first, so that we
don't deadlock with requests that have yet to obtain a credit.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
When we shift to using the transmit queue, then the task that holds the
write lock will not necessarily be the same as the one being transmitted.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Separate out the action of adding a request to the reply queue so that the
backchannel code can simply skip calling it altogether.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Stable bufixes:
- v3.17+: Fix an off-by-one in bl_map_stripe()
- v4.9+: NFSv4 client live hangs after live data migration recovery
- v4.18+: xprtrdma: Fix disconnect regression
- v4.14+: Fix locking in pnfs_generic_recover_commit_reqs
- v4.9+: Fix a sleep in atomic context in nfs4_callback_sequence()
Features:
- Add support for asynchronous server-side COPY operations
Other bugfixes and cleanups:
- Optitmizations and fixes involving NFS v4.1 / pNFS layout handling
- Optimize lseek(fd, SEEK_CUR, 0) on directories to avoid locking
- Immediately reschedule writeback when the server replies with an error
- Fix excessive attribute revalidation in nfs_execute_ok()
- Add error checking to nfs_idmap_prepare_message()
- Use new vm_fault_t return type
- Return a delegation when reclaiming one that the server has recalled
- Referrals should inherit proto setting from parents
- Make rpc_auth_create_args a const
- Improvements to rpc_iostats tracking
- Fix a potential reference leak when there is an error processing a callback
- Fix rmdir / mkdir / rename nlink accounting
- Fix updating inode change attribute
- Fix error handling in nfsn4_sp4_select_mode()
- Use an appropriate work queue for direct-write completion
- Don't busy wait if NFSv4 session draining is interrupted
-----BEGIN PGP SIGNATURE-----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=8+9t
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-4.19-1' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client updates from Anna Schumaker:
"These patches include adding async support for the v4.2 COPY
operation. I think Bruce is planning to send the server patches for
the next release, but I figured we could get the client side out of
the way now since it's been in my tree for a while. This shouldn't
cause any problems, since the server will still respond with
synchronous copies even if the client requests async.
Features:
- Add support for asynchronous server-side COPY operations
Stable bufixes:
- Fix an off-by-one in bl_map_stripe() (v3.17+)
- NFSv4 client live hangs after live data migration recovery (v4.9+)
- xprtrdma: Fix disconnect regression (v4.18+)
- Fix locking in pnfs_generic_recover_commit_reqs (v4.14+)
- Fix a sleep in atomic context in nfs4_callback_sequence() (v4.9+)
Other bugfixes and cleanups:
- Optimizations and fixes involving NFS v4.1 / pNFS layout handling
- Optimize lseek(fd, SEEK_CUR, 0) on directories to avoid locking
- Immediately reschedule writeback when the server replies with an
error
- Fix excessive attribute revalidation in nfs_execute_ok()
- Add error checking to nfs_idmap_prepare_message()
- Use new vm_fault_t return type
- Return a delegation when reclaiming one that the server has
recalled
- Referrals should inherit proto setting from parents
- Make rpc_auth_create_args a const
- Improvements to rpc_iostats tracking
- Fix a potential reference leak when there is an error processing a
callback
- Fix rmdir / mkdir / rename nlink accounting
- Fix updating inode change attribute
- Fix error handling in nfsn4_sp4_select_mode()
- Use an appropriate work queue for direct-write completion
- Don't busy wait if NFSv4 session draining is interrupted"
* tag 'nfs-for-4.19-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (54 commits)
pNFS: Remove unwanted optimisation of layoutget
pNFS/flexfiles: ff_layout_pg_init_read should exit on error
pNFS: Treat RECALLCONFLICT like DELAY...
pNFS: When updating the stateid in layoutreturn, also update the recall range
NFSv4: Fix a sleep in atomic context in nfs4_callback_sequence()
NFSv4: Fix locking in pnfs_generic_recover_commit_reqs
NFSv4: Fix a typo in nfs4_init_channel_attrs()
NFSv4: Don't busy wait if NFSv4 session draining is interrupted
NFS recover from destination server reboot for copies
NFS add a simple sync nfs4_proc_commit after async COPY
NFS handle COPY ERR_OFFLOAD_NO_REQS
NFS send OFFLOAD_CANCEL when COPY killed
NFS export nfs4_async_handle_error
NFS handle COPY reply CB_OFFLOAD call race
NFS add support for asynchronous COPY
NFS COPY xdr handle async reply
NFS OFFLOAD_CANCEL xdr
NFS CB_OFFLOAD xdr
NFS: Use an appropriate work queue for direct-write completion
NFSv4: Fix error handling in nfs4_sp4_select_mode()
...
missing Chuck's fixes for the problem with callbacks over GSS from
multi-homed servers, and a smaller fix from Laura Abbott.
-----BEGIN PGP SIGNATURE-----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=JnLK
-----END PGP SIGNATURE-----
Merge tag 'nfsd-4.19-1' of git://linux-nfs.org/~bfields/linux
Pull nfsd updates from Bruce Fields:
"Chuck Lever fixed a problem with NFSv4.0 callbacks over GSS from
multi-homed servers.
The only new feature is a minor bit of protocol (change_attr_type)
which the client doesn't even use yet.
Other than that, various bugfixes and cleanup"
* tag 'nfsd-4.19-1' of git://linux-nfs.org/~bfields/linux: (27 commits)
sunrpc: Add comment defining gssd upcall API keywords
nfsd: Remove callback_cred
nfsd: Use correct credential for NFSv4.0 callback with GSS
sunrpc: Extract target name into svc_cred
sunrpc: Enable the kernel to specify the hostname part of service principals
sunrpc: Don't use stack buffer with scatterlist
rpc: remove unneeded variable 'ret' in rdma_listen_handler
nfsd: use true and false for boolean values
nfsd: constify write_op[]
fs/nfsd: Delete invalid assignment statements in nfsd4_decode_exchange_id
NFSD: Handle full-length symlinks
NFSD: Refactor the generic write vector fill helper
svcrdma: Clean up Read chunk path
svcrdma: Avoid releasing a page in svc_xprt_release()
nfsd: Mark expected switch fall-through
sunrpc: remove redundant variables 'checksumlen','blocksize' and 'data'
nfsd: fix leaked file lock with nfs exported overlayfs
nfsd: don't advertise a SCSI layout for an unsupported request_queue
nfsd: fix corrupted reply to badly ordered compound
nfsd: clarify check_op_ordering
...
The ret is not modified after initalization, So just remove the variable
and return 0.
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Simplify the error handling at the tail of recv_read_chunk() by
re-arranging rq_pages[] housekeeping and documenting it properly.
NB: In this path, svc_rdma_recvfrom returns zero. Therefore no
subsequent reply processing is done on the svc_rqstp, and thus the
rq_respages field does not need to be updated.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
svc_xprt_release() invokes svc_free_res_pages(), which releases
pages between rq_respages and rq_next_page.
Historically, the RPC/RDMA transport has set these two pointers to
be different by one, which means:
- one page gets released when svc_recv returns 0. This normally
happens whenever one or more RDMA Reads need to be dispatched to
complete construction of an RPC Call.
- one page gets released after every call to svc_send.
In both cases, this released page is immediately refilled by
svc_alloc_arg. There does not seem to be a reason for releasing this
page.
To avoid this unnecessary memory allocator traffic, set rq_next_page
more carefully.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Variables 'checksumlen','blocksize' and 'data' are being assigned,
but are never used, hence they are redundant and can be removed.
Fix the following warning:
net/sunrpc/auth_gss/gss_krb5_wrap.c:443:7: warning: variable ‘blocksize’ set but not used [-Wunused-but-set-variable]
net/sunrpc/auth_gss/gss_krb5_crypto.c:376:15: warning: variable ‘checksumlen’ set but not used [-Wunused-but-set-variable]
net/sunrpc/xprtrdma/svc_rdma.c:97:9: warning: variable ‘data’ set but not used [-Wunused-but-set-variable]
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
I found that injecting disconnects with v4.18-rc resulted in
random failures of the multi-threaded git regression test.
The root cause appears to be that, after a reconnect, the
RPC/RDMA transport is waking pending RPCs before the transport has
posted enough Receive buffers to receive the Replies. If a Reply
arrives before enough Receive buffers are posted, the connection
is dropped. A few connection drops happen in quick succession as
the client and server struggle to regain credit synchronization.
This regression was introduced with commit 7c8d9e7c88 ("xprtrdma:
Move Receive posting to Receive handler"). The client is supposed to
post a single Receive when a connection is established because
it's not supposed to send more than one RPC Call before it gets
a fresh credit grant in the first RPC Reply [RFC 8166, Section
3.3.3].
Unfortunately there appears to be a longstanding bug in the Linux
client's credit accounting mechanism. On connect, it simply dumps
all pending RPC Calls onto the new connection. It's possible it has
done this ever since the RPC/RDMA transport was added to the kernel
ten years ago.
Servers have so far been tolerant of this bad behavior. Currently no
server implementation ever changes its credit grant over reconnects,
and servers always repost enough Receives before connections are
fully established.
The Linux client implementation used to post a Receive before each
of these Calls. This has covered up the flooding send behavior.
I could try to correct this old bug so that the client sends exactly
one RPC Call and waits for a Reply. Since we are so close to the
next merge window, I'm going to instead provide a simple patch to
post enough Receives before a reconnect completes (based on the
number of credits granted to the previous connection).
The spurious disconnects will be gone, but the client will still
send multiple RPC Calls immediately after a reconnect.
Addressing the latter problem will wait for a merge window because
a) I expect it to be a large change requiring lots of testing, and
b) obviously the Linux client has interoperated successfully since
day zero while still being broken.
Fixes: 7c8d9e7c88 ("xprtrdma: Move Receive posting to ... ")
Cc: stable@vger.kernel.org # v4.18+
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Since neither ib_post_send() nor ib_post_recv() modify the data structure
their second argument points at, declare that argument const. This change
makes it necessary to declare the 'bad_wr' argument const too and also to
modify all ULPs that call ib_post_send(), ib_post_recv() or
ib_post_srq_recv(). This patch does not change any functionality but makes
it possible for the compiler to verify whether the
ib_post_(send|recv|srq_recv) really do not modify the posted work request.
To make this possible, only one cast had to be introduce that casts away
constness, namely in rpcrdma_post_recvs(). The only way I can think of to
avoid that cast is to introduce an additional loop in that function or to
change the data type of bad_wr from struct ib_recv_wr ** into int
(an index that refers to an element in the work request list). However,
both approaches would require even more extensive changes than this
patch.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The call in svc_rdma_post_chunk_ctxt() does actually use bad_wr.
Fixes: ed288d74a9 ("net/xprtrdma: Simplify ib_post_(send|recv|srq_recv)() calls")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Instead of declaring and passing a dummy 'bad_wr' pointer, pass NULL
as third argument to ib_post_(send|recv|srq_recv)().
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Acked-by: Anna Schumaker <Anna.Schumaker@netapp.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch replaces the ib_device_attr.max_sge with max_send_sge and
max_recv_sge. It allows ulps to take advantage of devices that have very
different send and recv sge depths. For example cxgb4 has a max_recv_sge
of 4, yet a max_send_sge of 16. Splitting out these attributes allows
much more efficient use of the SQ for cxgb4 with ulps that use the RDMA_RW
API. Consider a large RDMA WRITE that has 16 scattergather entries.
With max_sge of 4, the ulp would send 4 WRITE WRs, but with max_sge of
16, it can be done with 1 WRITE WR.
Acked-by: Sagi Grimberg <sagi@grimberg.me>
Acked-by: Christoph Hellwig <hch@lst.de>
Acked-by: Selvin Xavier <selvin.xavier@broadcom.com>
Acked-by: Shiraz Saleem <shiraz.saleem@intel.com>
Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Highlights include:
Stable fixes:
- Fix a 1-byte stack overflow in nfs_idmap_read_and_verify_message
- Fix a hang due to incorrect error returns in rpcrdma_convert_iovs()
- Revert an incorrect change to the NFSv4.1 callback channel
- Fix a bug in the NFSv4.1 sequence error handling
Features and optimisations:
- Support for piggybacking a LAYOUTGET operation to the OPEN compound
- RDMA performance enhancements to deal with transport congestion
- Add proper SPDX tags for NetApp-contributed RDMA source
- Do not request delegated file attributes (size+change) from the server
- Optimise away a GETATTR in the lookup revalidate code when doing NFSv4 OPEN
- Optimise away unnecessary lookups for rename targets
- Misc performance improvements when freeing NFSv4 delegations
Bugfixes and cleanups:
- Try to fail quickly if proto=rdma
- Clean up RDMA receive trace points
- Fix sillyrename to return the delegation when appropriate
- Misc attribute revalidation fixes
- Immediately clear the pNFS layout on a file when the server returns ESTALE
- Return NFS4ERR_DELAY when delegation/layout recalls fail due to igrab()
- Fix the client behaviour on NFS4ERR_SEQ_FALSE_RETRY
-----BEGIN PGP SIGNATURE-----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=YWSl
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-4.18-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client updates from Trond Myklebust:
"Highlights include:
Stable fixes:
- Fix a 1-byte stack overflow in nfs_idmap_read_and_verify_message
- Fix a hang due to incorrect error returns in rpcrdma_convert_iovs()
- Revert an incorrect change to the NFSv4.1 callback channel
- Fix a bug in the NFSv4.1 sequence error handling
Features and optimisations:
- Support for piggybacking a LAYOUTGET operation to the OPEN compound
- RDMA performance enhancements to deal with transport congestion
- Add proper SPDX tags for NetApp-contributed RDMA source
- Do not request delegated file attributes (size+change) from the
server
- Optimise away a GETATTR in the lookup revalidate code when doing
NFSv4 OPEN
- Optimise away unnecessary lookups for rename targets
- Misc performance improvements when freeing NFSv4 delegations
Bugfixes and cleanups:
- Try to fail quickly if proto=rdma
- Clean up RDMA receive trace points
- Fix sillyrename to return the delegation when appropriate
- Misc attribute revalidation fixes
- Immediately clear the pNFS layout on a file when the server returns
ESTALE
- Return NFS4ERR_DELAY when delegation/layout recalls fail due to
igrab()
- Fix the client behaviour on NFS4ERR_SEQ_FALSE_RETRY"
* tag 'nfs-for-4.18-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (80 commits)
skip LAYOUTRETURN if layout is invalid
NFSv4.1: Fix the client behaviour on NFS4ERR_SEQ_FALSE_RETRY
NFSv4: Fix a typo in nfs41_sequence_process
NFSv4: Revert commit 5f83d86cf5 ("NFSv4.x: Fix wraparound issues..")
NFSv4: Return NFS4ERR_DELAY when a layout recall fails due to igrab()
NFSv4: Return NFS4ERR_DELAY when a delegation recall fails due to igrab()
NFSv4.0: Remove transport protocol name from non-UCS client ID
NFSv4.0: Remove cl_ipaddr from non-UCS client ID
NFSv4: Fix a compiler warning when CONFIG_NFS_V4_1 is undefined
NFS: Filter cache invalidation when holding a delegation
NFS: Ignore NFS_INO_REVAL_FORCED in nfs_check_inode_attributes()
NFS: Improve caching while holding a delegation
NFS: Fix attribute revalidation
NFS: fix up nfs_setattr_update_inode
NFSv4: Ensure the inode is clean when we set a delegation
NFSv4: Ignore NFS_INO_REVAL_FORCED in nfs4_proc_access
NFSv4: Don't ask for delegated attributes when adding a hard link
NFSv4: Don't ask for delegated attributes when revalidating the inode
NFS: Pass the inode down to the getattr() callback
NFSv4: Don't request size+change attribute if they are delegated to us
...
from Chuck Lever with new trace points, miscellaneous cleanups, and
streamlining of the send and receive paths. Other than that, some
miscellaneous bugfixes.
-----BEGIN PGP SIGNATURE-----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=PuEk
-----END PGP SIGNATURE-----
Merge tag 'nfsd-4.18' of git://linux-nfs.org/~bfields/linux
Pull nfsd updates from Bruce Fields:
"A relatively quiet cycle for nfsd.
The largest piece is an RDMA update from Chuck Lever with new trace
points, miscellaneous cleanups, and streamlining of the send and
receive paths.
Other than that, some miscellaneous bugfixes"
* tag 'nfsd-4.18' of git://linux-nfs.org/~bfields/linux: (26 commits)
nfsd: fix error handling in nfs4_set_delegation()
nfsd: fix potential use-after-free in nfsd4_decode_getdeviceinfo
Fix 16-byte memory leak in gssp_accept_sec_context_upcall
svcrdma: Fix incorrect return value/type in svc_rdma_post_recvs
svcrdma: Remove unused svc_rdma_op_ctxt
svcrdma: Persistently allocate and DMA-map Send buffers
svcrdma: Simplify svc_rdma_send()
svcrdma: Remove post_send_wr
svcrdma: Don't overrun the SGE array in svc_rdma_send_ctxt
svcrdma: Introduce svc_rdma_send_ctxt
svcrdma: Clean up Send SGE accounting
svcrdma: Refactor svc_rdma_dma_map_buf
svcrdma: Allocate recv_ctxt's on CPU handling Receives
svcrdma: Persistently allocate and DMA-map Receive buffers
svcrdma: Preserve Receive buffer until svc_rdma_sendto
svcrdma: Simplify svc_rdma_recv_ctxt_put
svcrdma: Remove sc_rq_depth
svcrdma: Introduce svc_rdma_recv_ctxt
svcrdma: Trace key RDMA API events
svcrdma: Trace key RPC/RDMA protocol events
...
This crept in during the development process and wasn't caught
before I posted the "final" version.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 0b2613c5883f ('svcrdma: Allocate recv_ctxt's on CPU ... ')
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Stable patches:
- xprtrdma: Return -ENOBUFS when no pages are available
New features:
- Add ->alloc_slot() and ->free_slot() functions
Bugfixes and cleanups:
- Add missing SPDX tags to some files
- Try to fail mount quickly if client has no RDMA devices
- Create transport IDs in the correct network namespace
- Fix max_send_wr computation
- Clean up receive tracepoints
- Refactor receive handling
- Remove unused functions
-----BEGIN PGP SIGNATURE-----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=I9YU
-----END PGP SIGNATURE-----
Merge tag 'nfs-rdma-for-4.18-1' of git://git.linux-nfs.org/projects/anna/linux-nfs
NFS-over-RDMA client updates for Linux 4.18
Stable patches:
- xprtrdma: Return -ENOBUFS when no pages are available
New features:
- Add ->alloc_slot() and ->free_slot() functions
Bugfixes and cleanups:
- Add missing SPDX tags to some files
- Try to fail mount quickly if client has no RDMA devices
- Create transport IDs in the correct network namespace
- Fix max_send_wr computation
- Clean up receive tracepoints
- Refactor receive handling
- Remove unused functions
Clean up: This array was used in a dprintk that was replaced by a
trace point in commit ab03eff58e ("xprtrdma: Add trace points in
RPC Call transmit paths").
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Currently, when the sendctx queue is exhausted during marshaling, the
RPC/RDMA transport places the RPC task on the delayq, which forces a
wait for HZ >> 2 before the marshal and send is retried.
With this change, the transport now places such an RPC task on the
pending queue, and wakes it just as soon as more sendctxs become
available. This typically takes less than a millisecond, and the
write_space waking mechanism is less deadlock-prone.
Moreover, the waiting RPC task is holding the transport's write
lock, which blocks the transport from sending RPCs. Therefore faster
recovery from sendctx queue exhaustion is desirable.
Cf. commit 5804891455d5 ("xprtrdma: ->send_request returns -EAGAIN
when there are no free MRs").
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: The logic to wait for write space is common to a bunch of
the encoding helper functions. Lift it out and put it in the tail
of rpcrdma_marshal_req().
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
The use of -EAGAIN in rpcrdma_convert_iovs() is a latent bug: the
transport never calls xprt_write_space() when more pages become
available. -ENOBUFS will trigger the correct "delay briefly and call
again" logic.
Fixes: 7a89f9c626 ("xprtrdma: Honor ->send_request API contract")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: stable@vger.kernel.org # 4.8+
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Bugfixes:
- Fix a possible NFSoRDMA list corruption during recovery
- Fix sunrpc tracepoint crashes
Other change:
- Update Trond's email in the MAINTAINERS file
-----BEGIN PGP SIGNATURE-----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=xfe9
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-4.17-2' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client fixes from Anna Schumaker:
"These patches fix both a possible corruption during NFSoRDMA MR
recovery, and a sunrpc tracepoint crash.
Additionally, Trond has a new email address to put in the MAINTAINERS
file"
* tag 'nfs-for-4.17-2' of git://git.linux-nfs.org/projects/anna/linux-nfs:
Change Trond's email address in MAINTAINERS
sunrpc: Fix latency trace point crashes
xprtrdma: Fix list corruption / DMAR errors during MR recovery
While sending each RPC Reply, svc_rdma_sendto allocates and DMA-
maps a separate buffer where the RPC/RDMA transport header is
constructed. The buffer is unmapped and released in the Send
completion handler. This is significant per-RPC overhead,
especially for small RPCs.
Instead, allocate and DMA-map a buffer, and cache it in each
svc_rdma_send_ctxt. This buffer and its mapping can be re-used
for each RPC, saving the cost of memory allocation and DMA
mapping.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Clean up: No current caller of svc_rdma_send's passes in a chained
WR. The logic that counts the chain length can be replaced with a
constant (1).
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Clean up: Now that the send_wr is part of the svc_rdma_send_ctxt,
svc_rdma_post_send_wr is nearly empty.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Receive buffers are always the same size, but each Send WR has a
variable number of SGEs, based on the contents of the xdr_buf being
sent.
While assembling a Send WR, keep track of the number of SGEs so that
we don't exceed the device's maximum, or walk off the end of the
Send SGE array.
For now the Send path just fails if it exceeds the maximum.
The current logic in svc_rdma_accept bases the maximum number of
Send SGEs on the largest NFS request that can be sent or received.
In the transport layer, the limit is actually based on the
capabilities of the underlying device, not on properties of the
Upper Layer Protocol.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
svc_rdma_op_ctxt's are pre-allocated and maintained on a per-xprt
free list. This eliminates the overhead of calling kmalloc / kfree,
both of which grab a globally shared lock that disables interrupts.
Introduce a replacement to svc_rdma_op_ctxt's that is built
especially for the svcrdma Send path.
Subsequent patches will take advantage of this new structure by
allocating real resources which are then cached in these objects.
The allocations are freed when the transport is torn down.
I've renamed the structure so that static type checking can be used
to ensure that uses of op_ctxt and send_ctxt are not confused. As an
additional clean up, structure fields are renamed to conform with
kernel coding conventions.
Additional clean ups:
- Handle svc_rdma_send_ctxt_get allocation failure at each call
site, rather than pre-allocating and hoping we guessed correctly
- All send_ctxt_put call-sites request page freeing, so remove
the @free_pages argument
- All send_ctxt_put call-sites unmap SGEs, so fold that into
svc_rdma_send_ctxt_put
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Clean up: Since there's already a svc_rdma_op_ctxt being passed
around with the running count of mapped SGEs, drop unneeded
parameters to svc_rdma_post_send_wr().
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Clean up: svc_rdma_dma_map_buf does mostly the same thing as
svc_rdma_dma_map_page, so let's fold these together.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
There is a significant latency penalty when processing an ingress
Receive if the Receive buffer resides in memory that is not on the
same NUMA node as the the CPU handling completions for a CQ.
The system administrator and the device driver determine which CPU
handles completions. This CPU does not change during life of the CQ.
Further the Upper Layer does not have any visibility of which CPU it
is.
Allocating Receive buffers in the Receive completion handler
guarantees that Receive buffers are allocated on the preferred NUMA
node for that CQ.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The current Receive path uses an array of pages which are allocated
and DMA mapped when each Receive WR is posted, and then handed off
to the upper layer in rqstp::rq_arg. The page flip releases unused
pages in the rq_pages pagelist. This mechanism introduces a
significant amount of overhead.
So instead, kmalloc the Receive buffer, and leave it DMA-mapped
while the transport remains connected. This confers a number of
benefits:
* Each Receive WR requires only one receive SGE, no matter how large
the inline threshold is. This helps the server-side NFS/RDMA
transport operate on less capable RDMA devices.
* The Receive buffer is left allocated and mapped all the time. This
relieves svc_rdma_post_recv from the overhead of allocating and
DMA-mapping a fresh buffer.
* svc_rdma_wc_receive no longer has to DMA unmap the Receive buffer.
It has to DMA sync only the number of bytes that were received.
* svc_rdma_build_arg_xdr no longer has to free a page in rq_pages
for each page in the Receive buffer, making it a constant-time
function.
* The Receive buffer is now plugged directly into the rq_arg's
head[0].iov_vec, and can be larger than a page without spilling
over into rq_arg's page list. This enables simplification of
the RDMA Read path in subsequent patches.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Rather than releasing the incoming svc_rdma_recv_ctxt at the end of
svc_rdma_recvfrom, hold onto it until svc_rdma_sendto.
This permits the contents of the Receive buffer to be preserved
through svc_process and then referenced directly in sendto as it
constructs Write and Reply chunks to return to the client.
The real changes will come in subsequent patches.
Note: I cannot use ->xpo_release_rqst for this purpose because that
is called _before_ ->xpo_sendto. svc_rdma_sendto uses information in
the received Call transport header to construct the Reply transport
header, which is preserved in the RPC's Receive buffer.
The historical comment in svc_send() isn't helpful: it is already
obvious that ->xpo_release_rqst is being called before ->xpo_sendto,
but there is no explanation for this ordering going back to the
beginning of the git era.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Currently svc_rdma_recv_ctxt_put's callers have to know whether they
want to free the ctxt's pages or not. This means the human
developers have to know when and why to set that free_pages
argument.
Instead, the ctxt should carry that information with it so that
svc_rdma_recv_ctxt_put does the right thing no matter who is
calling.
We want to keep track of the number of pages in the Receive buffer
separately from the number of pages pulled over by RDMA Read. This
is so that the correct number of pages can be freed properly and
that number is well-documented.
So now, rc_hdr_count is the number of pages consumed by head[0]
(ie., the page index where the Read chunk should start); and
rc_page_count is always the number of pages that need to be released
when the ctxt is put.
The @free_pages argument is no longer needed.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Clean up: No need to retain rq_depth in struct svcrdma_xprt, it is
used only in svc_rdma_accept().
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
svc_rdma_op_ctxt's are pre-allocated and maintained on a per-xprt
free list. This eliminates the overhead of calling kmalloc / kfree,
both of which grab a globally shared lock that disables interrupts.
To reduce contention further, separate the use of these objects in
the Receive and Send paths in svcrdma.
Subsequent patches will take advantage of this separation by
allocating real resources which are then cached in these objects.
The allocations are freed when the transport is torn down.
I've renamed the structure so that static type checking can be used
to ensure that uses of op_ctxt and recv_ctxt are not confused. As an
additional clean up, structure fields are renamed to conform with
kernel coding conventions.
As a final clean up, helpers related to recv_ctxt are moved closer
to the functions that use them.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This includes:
* Posting on the Send and Receive queues
* Send, Receive, Read, and Write completion
* Connect upcalls
* QP errors
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This includes:
* Transport accept and tear-down
* Decisions about using Write and Reply chunks
* Each RDMA segment that is handled
* Whenever an RDMA_ERR is sent
As a clean-up, I've standardized the order of the includes, and
removed some now redundant dprintk call sites.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Clean up: Move #include <trace/events/rpcrdma.h> into source files,
similar to how it is done with trace/events/sunrpc.h.
Server-side trace points will be part of the rpcrdma subsystem,
just like the client-side trace points.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Ensure each RDMA listener and its children transports are created in
the same net namespace as the user that started the NFS service.
This is similar to how listener sockets are created in
svc_create_socket, required for enabling support for containers.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Clean up: The only call site is in the same file as the function's
definition.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: There is only one remaining call site for this helper.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up. There is only one call-site for this helper, and it can be
simplified by using list_first_entry_or_null().
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: These functions are no longer used.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Receive completion and Reply handling are done by a BOUND
workqueue, meaning they run on only one CPU.
Posting receives is currently done in the send_request path, which
on large systems is typically done on a different CPU than the one
handling Receive completions. This results in movement of
Receive-related cachelines between the sending and receiving CPUs.
More importantly, it means that currently Receives are posted while
the transport's write lock is held, which is unnecessary and costly.
Finally, allocation of Receive buffers is performed on-demand in
the Receive completion handler. This helps guarantee that they are
allocated on the same NUMA node as the CPU that handles Receive
completions.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
For clarity, report the posting and completion of Receive CQEs.
Also, the wc->byte_len field contains garbage if wc->status is
non-zero, and the vendor error field contains garbage if wc->status
is zero. For readability, don't save those fields in those cases.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
This simplifies allocation of the generic RPC slot and xprtrdma
specific per-RPC resources.
It also makes xprtrdma more like the socket-based transports:
->buf_alloc and ->buf_free are now responsible only for send and
receive buffers.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
rpcrdma_buffer_get acquires an rpcrdma_req and rep for each RPC.
Currently this is done in the call_allocate action, and sometimes it
can fail if there are many outstanding RPCs.
When call_allocate fails, the RPC task is put on the delayq. It is
awoken a few milliseconds later, but there's no guarantee it will
get a buffer at that time. The RPC task can be repeatedly put back
to sleep or even starved.
The call_allocate action should rarely fail. The delayq mechanism is
not meant to deal with transport congestion.
In the current sunrpc stack, there is a friendlier way to deal with
this situation. These objects are actually tantamount to an RPC
slot (rpc_rqst) and there is a separate FSM action, distinct from
call_allocate, for allocating slot resources. This is the
call_reserve action.
When allocation fails during this action, the RPC is placed on the
transport's backlog queue. The backlog mechanism provides a stronger
guarantee that when the RPC is awoken, a buffer will be available
for it; and backlogged RPCs are awoken one-at-a-time.
To make slot resource allocation occur in the call_reserve action,
create special ->alloc_slot and ->free_slot call-outs for xprtrdma.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Refactor: xprtrdma needs to have better control over when RPCs are
awoken from the backlog queue, so replace xprt_free_slot with a
transport op callout.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
For FRWR, the computation of max_send_wr is split between
frwr_op_open and rpcrdma_ep_create, which makes it difficult to tell
that the max_send_wr result is currently incorrect if frwr_op_open
has to reduce the credit limit to accommodate a small max_qp_wr.
This is a problem now that extra WRs are needed for backchannel
operations and a drain CQE.
So, refactor the computation so that it is all done in ->ro_open,
and fix the FRWR version of this computation so that it
accommodates HCAs with small max_qp_wr correctly.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Set up RPC/RDMA transport in mount.nfs's network namespace. This
passes the correct namespace information to the RDMA core, similar
to how RPC sockets are created (see xs_create_sock).
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
rdma_resolve_addr(3) says:
> This call is used to map a given destination IP address to a
> usable RDMA address. The IP to RDMA address mapping is done
> using the local routing tables, or via ARP.
If this can't be done, there's no local device that can be used
to establish an RDMA-capable network path to the remote. In this
case, the RDMA CM very quickly posts an RDMA_CM_EVENT_ADDR_ERROR
upcall.
Currently rpcrdma_conn_upcall() converts RDMA_CM_EVENT_ADDR_ERROR
to EHOSTUNREACH. mount.nfs seems to want to retry EHOSTUNREACH
forever, thinking that this is a temporary situation. This makes
mount.nfs appear to hang if I try to mount with proto=rdma through,
say, a conventional Ethernet device.
If the admin has specified proto=rdma along with a server IP address
that requires a network path that does not support RDMA, instead
let's fail with a permanent error. -EPROTONOSUPPORT is returned when
NFSv4 or one of its minor versions is not supported.
-EPROTO is not (currently) retried by mount.nfs.
There are potentially other similar cases where -EPROTO is an
appropriate return code.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Olga Kornievskaia <kolga@netapp.com>
Tested-by: Anna Schumaker <Anna.Schumaker@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
The ro_release_mr methods check whether mr->mr_list is empty.
Therefore, be sure to always use list_del_init when removing an MR
linked into a list using that field. Otherwise, when recovering from
transport failures or device removal, list corruption can result, or
MRs can get mapped or unmapped an odd number of times, resulting in
IOMMU-related failures.
In general this fix is appropriate back to v4.8. However, code
changes since then make it impossible to apply this patch directly
to stable kernels. The fix would have to be applied by hand or
reworked for kernels earlier than v4.16.
Backport guidance -- there are several cases:
- When creating an MR, initialize mr_list so that using list_empty
on an as-yet-unused MR is safe.
- When an MR is being handled by the remote invalidation path,
ensure that mr_list is reinitialized when it is removed from
rl_registered.
- When an MR is being handled by rpcrdma_destroy_mrs, it is removed
from mr_all, but it may still be on an rl_registered list. In
that case, the MR needs to be removed from that list before being
released.
- Other cases are covered by using list_del_init in rpcrdma_mr_pop.
Fixes: 9d6b040978 ('xprtrdma: Place registered MWs on a ... ')
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Stable bugfixes:
- xprtrdma: Fix corner cases when handling device removal # v4.12+
- xprtrdma: Fix latency regression on NUMA NFS/RDMA clients # v4.15+
Features:
- New sunrpc tracepoint for RPC pings
- Finer grained NFSv4 attribute checking
- Don't unnecessarily return NFS v4 delegations
Other bugfixes and cleanups:
- Several other small NFSoRDMA cleanups
- Improvements to the sunrpc RTT measurements
- A few sunrpc tracepoint cleanups
- Various fixes for NFS v4 lock notifications
- Various sunrpc and NFS v4 XDR encoding cleanups
- Switch to the ida_simple API
- Fix NFSv4.1 exclusive create
- Forget acl cache after setattr operation
- Don't advance the nfs_entry readdir cookie if xdr decoding fails
-----BEGIN PGP SIGNATURE-----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=IlWo
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-4.17-1' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client updates from Anna Schumaker:
"Stable bugfixes:
- xprtrdma: Fix corner cases when handling device removal # v4.12+
- xprtrdma: Fix latency regression on NUMA NFS/RDMA clients # v4.15+
Features:
- New sunrpc tracepoint for RPC pings
- Finer grained NFSv4 attribute checking
- Don't unnecessarily return NFS v4 delegations
Other bugfixes and cleanups:
- Several other small NFSoRDMA cleanups
- Improvements to the sunrpc RTT measurements
- A few sunrpc tracepoint cleanups
- Various fixes for NFS v4 lock notifications
- Various sunrpc and NFS v4 XDR encoding cleanups
- Switch to the ida_simple API
- Fix NFSv4.1 exclusive create
- Forget acl cache after setattr operation
- Don't advance the nfs_entry readdir cookie if xdr decoding fails"
* tag 'nfs-for-4.17-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (47 commits)
NFS: advance nfs_entry cookie only after decoding completes successfully
NFSv3/acl: forget acl cache after setattr
NFSv4.1: Fix exclusive create
NFSv4: Declare the size up to date after it was set.
nfs: Use ida_simple API
NFSv4: Fix the nfs_inode_set_delegation() arguments
NFSv4: Clean up CB_GETATTR encoding
NFSv4: Don't ask for attributes when ACCESS is protected by a delegation
NFSv4: Add a helper to encode/decode struct timespec
NFSv4: Clean up encode_attrs
NFSv4; Clean up XDR encoding of type bitmap4
NFSv4: Allow GFP_NOIO sleeps in decode_attr_owner/decode_attr_group
SUNRPC: Add a helper for encoding opaque data inline
SUNRPC: Add helpers for decoding opaque and string types
NFSv4: Ignore change attribute invalidations if we hold a delegation
NFS: More fine grained attribute tracking
NFS: Don't force unnecessary cache invalidation in nfs_update_inode()
NFS: Don't redirty the attribute cache in nfs_wcc_update_inode()
NFS: Don't force a revalidation of all attributes if change is missing
NFS: Convert NFS_INO_INVALID flags to unsigned long
...
Michal Kalderon has found some corner cases around device unload
with active NFS mounts that I didn't have the imagination to test
when xprtrdma device removal was added last year.
- The ULP device removal handler is responsible for deallocating
the PD. That wasn't clear to me initially, and my own testing
suggested it was not necessary, but that is incorrect.
- The transport destruction path can no longer assume that there
is a valid ID.
- When destroying a transport, ensure that ib_free_cq() is not
invoked on a CQ that was already released.
Reported-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Fixes: bebd031866 ("xprtrdma: Support unplugging an HCA from ...")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: stable@vger.kernel.org # v4.12+
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Some RPC transports have more overhead in their send_request
callouts than others. For example, for RPC-over-RDMA:
- Marshaling an RPC often has to DMA map the RPC arguments
- Registration methods perform memory registration as part of
marshaling
To capture just server and network latencies more precisely: when
sending a Call, capture the rq_xtime timestamp _after_ the transport
header has been marshaled.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Refactor: Both rpcrdma_create_req call sites have to allocate the
buffer where the transport header is built, so just move that
allocation into rpcrdma_create_req.
This buffer is a fixed size. There's no needed information available
in call_allocate that is not also available when the transport is
created.
The original purpose for allocating these buffers on demand was to
reduce the possibility that an allocation failure during transport
creation will hork the mount operation during low memory scenarios.
Some relief for this rare possibility is coming up in the next few
patches.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
With FRWR, the client transport can perform memory registration and
post a Send with just a single ib_post_send.
This reduces contention between the send_request path and the Send
Completion handlers, and reduces the overhead of registering a chunk
that has multiple segments.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
RPC-over-RDMA version 1 credit accounting relies on there being a
response message for every RPC Call. This means that RPC procedures
that have no reply will disrupt credit accounting, just in the same
way as a retransmit would (since it is sent because no reply has
arrived). Deal with the "no reply" case the same way.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Create fewer MRs on average. Many workloads don't need as many as
32 MRs, and the transport can now quickly restock the MR free list.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Currently, when the MR free list is exhausted during marshaling, the
RPC/RDMA transport places the RPC task on the delayq, which forces a
wait for HZ >> 2 before the marshal and send is retried.
With this change, the transport now places such an RPC task on the
pending queue, and wakes it just as soon as more MRs have been
created. Creating more MRs typically takes less than a millisecond,
and this waking mechanism is less deadlock-prone.
Moreover, the waiting RPC task is holding the transport's write
lock, which blocks the transport from sending RPCs. Therefore faster
recovery from MR exhaustion is desirable.
This is the same mechanism that the TCP transport utilizes when
handling write buffer space exhaustion.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: The generic rq_connect_cookie is sufficient to detect RPC
Call retransmission.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: We need to check only that the value does not exceed the
range of the u8 field it's going into.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
With v4.15, on one of my NFS/RDMA clients I measured a nearly
doubling in the latency of small read and write system calls. There
was no change in server round trip time. The extra latency appears
in the whole RPC execution path.
"git bisect" settled on commit ccede75985 ("xprtrdma: Spread reply
processing over more CPUs") .
After some experimentation, I found that leaving the WQ bound and
allowing the scheduler to pick the dispatch CPU seems to eliminate
the long latencies, and it does not introduce any new regressions.
The fix is implemented by reverting only the part of
commit ccede75985 ("xprtrdma: Spread reply processing over more
CPUs") that dispatches RPC replies specifically on the CPU where the
matching RPC call was made.
Interestingly, saving the CPU number and later queuing reply
processing there was effective _only_ for a NFS READ and WRITE
request. On my NUMA client, in-kernel RPC reply processing for
asynchronous RPCs was dispatched on the same CPU where the RPC call
was made, as expected. However synchronous RPCs seem to get their
reply dispatched on some other CPU than where the call was placed,
every time.
Fixes: ccede75985 ("xprtrdma: Spread reply processing over ... ")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: stable@vger.kernel.org # v4.15+
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
TP_printk defines a format string that is passed to user space for
converting raw trace event records to something human-readable.
My user space's printf (Oracle Linux 7), however, does not have a
%pI format specifier. The result is that what is supposed to be an
IP address in the output of "trace-cmd report" is just a string that
says the field couldn't be displayed.
To fix this, adopt the same approach as the client: maintain a pre-
formated presentation address for occasions when %pI is not
available.
The location of the trace_svc_send trace point is adjusted so that
rqst->rq_xprt is not NULL when the trace event is recorded.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Clean up: Instead of returning a value that is used to set or clear
a bit, just make ->xpo_secure_port mangle that bit, and return void.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Clean up: The value of the byte_count parameter is already passed
to rdma_build_arg_xdr as part of the svc_rdma_op_ctxt structure.
Further, without the parameter called "byte_count" there is no need
to have the abbreviated "bc" automatic variable. "bc" can now be
called something more intuitive.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The target needs to return the lesser of the client's Inbound RDMA
Read Queue Depth (IRD), provided in the connection parameters, and
the local device's Outbound RDMA Read Queue Depth (ORD). The latter
limit is max_qp_init_rd_atom, not max_qp_rd_atom.
The svcrdma_ord value caps the ORD value for iWARP transports, which
do not exchange ORD/IRD values at connection time. Since no other
Linux kernel RDMA-enabled storage target sees fit to provide this
cap, I'm removing it here too.
initiator_depth is a u8, so ensure the computed ORD value does not
overflow that field.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Clean up: Other completion handlers use pr_err, not pr_warn.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Hightlights include:
Stable fixes:
- Fix an incorrect calculation of the RDMA send scatter gather element limit
- Fix an Oops when attempting to free resources after RDMA device removal
Bugfixes:
- SUNRPC: Ensure we always release the TCP socket in a timely fashion when
the connection is shut down.
- SUNRPC: Don't call __UDPX_INC_STATS() from a preemptible context
Latency/Performance:
- SUNRPC: Queue latency sensitive socket tasks to the less contended
xprtiod queue
- SUNRPC: Make the xprtiod workqueue unbounded.
- SUNRPC: Make the rpciod workqueue unbounded
-----BEGIN PGP SIGNATURE-----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=KST7
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-4.16-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull more NFS client updates from Trond Myklebust:
"A few bugfixes and some small sunrpc latency/performance improvements
before the merge window closes:
Stable fixes:
- fix an incorrect calculation of the RDMA send scatter gather
element limit
- fix an Oops when attempting to free resources after RDMA device
removal
Bugfixes:
- SUNRPC: Ensure we always release the TCP socket in a timely fashion
when the connection is shut down.
- SUNRPC: Don't call __UDPX_INC_STATS() from a preemptible context
Latency/Performance:
- SUNRPC: Queue latency sensitive socket tasks to the less contended
xprtiod queue
- SUNRPC: Make the xprtiod workqueue unbounded.
- SUNRPC: Make the rpciod workqueue unbounded"
* tag 'nfs-for-4.16-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
SUNRPC: Don't call __UDPX_INC_STATS() from a preemptible context
fix parallelism for rpc tasks
Make the xprtiod workqueue unbounded.
SUNRPC: Queue latency-sensitive socket tasks to xprtiod
SUNRPC: Ensure we always close the socket after a connection shuts down
xprtrdma: Fix BUG after a device removal
xprtrdma: Fix calculation of ri_max_send_sges
But it's also a fairly small update this time around. Some cleanup,
RDMA fixes, overlayfs fixes, and a fix for an NFSv4 state bug.
The bigger deal for nfsd this time around is Jeff Layton's
already-merged i_version patches. This series has a minor conflict with
that one, and the resolution should be obvious. (Stephen Rothwell has
been carrying it in linux-next for what it's worth.)
-----BEGIN PGP SIGNATURE-----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=icEX
-----END PGP SIGNATURE-----
Merge tag 'nfsd-4.16' of git://linux-nfs.org/~bfields/linux
Pull nfsd update from Bruce Fields:
"A fairly small update this time around. Some cleanup, RDMA fixes,
overlayfs fixes, and a fix for an NFSv4 state bug.
The bigger deal for nfsd this time around was Jeff Layton's
already-merged i_version patches"
* tag 'nfsd-4.16' of git://linux-nfs.org/~bfields/linux:
svcrdma: Fix Read chunk round-up
NFSD: hide unused svcxdr_dupstr()
nfsd: store stat times in fill_pre_wcc() instead of inode times
nfsd: encode stat->mtime for getattr instead of inode->i_mtime
nfsd: return RESOURCE not GARBAGE_ARGS on too many ops
nfsd4: don't set lock stateid's sc_type to CLOSED
nfsd: Detect unhashed stids in nfsd4_verify_open_stid()
sunrpc: remove dead code in svc_sock_setbufsize
svcrdma: Post Receives in the Receive completion handler
nfsd4: permit layoutget of executable-only files
lockd: convert nlm_rqst.a_count from atomic_t to refcount_t
lockd: convert nlm_lockowner.count from atomic_t to refcount_t
lockd: convert nsm_handle.sm_count from atomic_t to refcount_t
A single NFSv4 WRITE compound can often have three operations:
PUTFH, WRITE, then GETATTR.
When the WRITE payload is sent in a Read chunk, the client places
the GETATTR in the inline part of the RPC/RDMA message, just after
the WRITE operation (sans payload). The position value in the Read
chunk enables the receiver to insert the Read chunk at the correct
place in the received XDR stream; that is between the WRITE and
GETATTR.
According to RFC 8166, an NFS/RDMA client does not have to add XDR
round-up to the Read chunk that carries the WRITE payload. The
receiver adds XDR round-up padding if it is absent and the
receiver's XDR decoder requires it to be present.
Commit 193bcb7b37 ("svcrdma: Populate tail iovec when receiving")
attempted to add support for receiving such a compound so that just
the WRITE payload appears in rq_arg's page list, and the trailing
GETATTR is placed in rq_arg's tail iovec. (TCP just strings the
whole compound into the head iovec and page list, without regard
to the alignment of the WRITE payload).
The server transport logic also had to accommodate the optional XDR
round-up of the Read chunk, which it did simply by lengthening the
tail iovec when round-up was needed. This approach is adequate for
the NFSv2 and NFSv3 WRITE decoders.
Unfortunately it is not sufficient for nfsd4_decode_write. When the
Read chunk length is a couple of bytes less than PAGE_SIZE, the
computation at the end of nfsd4_decode_write allows argp->pagelen to
go negative, which breaks the logic in read_buf that looks for the
tail iovec.
The result is that a WRITE operation whose payload length is just
less than a multiple of a page succeeds, but the subsequent GETATTR
in the same compound fails with NFS4ERR_OP_ILLEGAL because the XDR
decoder can't find it. Clients ignore the error, but they must
update their attribute cache via a separate round trip.
As nfsd4_decode_write appears to expect the payload itself to always
have appropriate XDR round-up, have svc_rdma_build_normal_read_chunk
add the Read chunk XDR round-up to the page_len rather than
lengthening the tail iovec.
Reported-by: Olga Kornievskaia <kolga@netapp.com>
Fixes: 193bcb7b37 ("svcrdma: Populate tail iovec when receiving")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Michal Kalderon reports a BUG that occurs just after device removal:
[ 169.112490] rpcrdma: removing device qedr0 for 192.168.110.146:20049
[ 169.143909] BUG: unable to handle kernel NULL pointer dereference at 0000000000000010
[ 169.181837] IP: rpcrdma_dma_unmap_regbuf+0xa/0x60 [rpcrdma]
The RPC/RDMA client transport attempts to allocate some resources
on demand. Registered buffers are one such resource. These are
allocated (or re-allocated) by xprt_rdma_allocate to hold RPC Call
and Reply messages. A hardware resource is associated with each of
these buffers, as they can be used for a Send or Receive Work
Request.
If a device is removed from under an NFS/RDMA mount, the transport
layer is responsible for releasing all hardware resources before
the device can be finally unplugged. A BUG results when the NFS
mount hasn't yet seen much activity: the transport tries to release
resources that haven't yet been allocated.
rpcrdma_free_regbuf() already checks for this case, so just move
that check to cover the DEVICE_REMOVAL case as well.
Reported-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Fixes: bebd031866 ("xprtrdma: Support unplugging an HCA ...")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Cc: stable@vger.kernel.org # v4.12+
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Commit 16f906d66c ("xprtrdma: Reduce required number of send
SGEs") introduced the rpcrdma_ia::ri_max_send_sges field. This fixes
a problem where xprtrdma would not work if the device's max_sge
capability was small (low single digits).
At least RPCRDMA_MIN_SEND_SGES are needed for the inline parts of
each RPC. ri_max_send_sges is set to this value:
ia->ri_max_send_sges = max_sge - RPCRDMA_MIN_SEND_SGES;
Then when marshaling each RPC, rpcrdma_args_inline uses that value
to determine whether the device has enough Send SGEs to convey an
NFS WRITE payload inline, or whether instead a Read chunk is
required.
More recently, commit ae72950abf ("xprtrdma: Add data structure to
manage RDMA Send arguments") used the ri_max_send_sges value to
calculate the size of an array, but that commit erroneously assumed
ri_max_send_sges contains a value similar to the device's max_sge,
and not one that was reduced by the minimum SGE count.
This assumption results in the calculated size of the sendctx's
Send SGE array to be too small. When the array is used to marshal
an RPC, the code can write Send SGEs into the following sendctx
element in that array, corrupting it. When the device's max_sge is
large, this issue is entirely harmless; but it results in an oops
in the provider's post_send method, if dev.attrs.max_sge is small.
So let's straighten this out: ri_max_send_sges will now contain a
value with the same meaning as dev.attrs.max_sge, which makes
the code easier to understand, and enables rpcrdma_sendctx_create
to calculate the size of the SGE array correctly.
Reported-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Fixes: 16f906d66c ("xprtrdma: Reduce required number of send SGEs")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Cc: stable@vger.kernel.org # v4.10+
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Track RPC timeouts: report the XID and the server address to match
the content of network capture.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Fix kernel-doc warnings in net/sunrpc/xprtrdma/ .
net/sunrpc/xprtrdma/verbs.c:1575: warning: No description found for parameter 'count'
net/sunrpc/xprtrdma/verbs.c:1575: warning: Excess function parameter 'min_reqs' description in 'rpcrdma_ep_post_extra_recv'
net/sunrpc/xprtrdma/backchannel.c:288: warning: No description found for parameter 'r_xprt'
net/sunrpc/xprtrdma/backchannel.c:288: warning: Excess function parameter 'xprt' description in 'rpcrdma_bc_receive_call'
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
The contents of seg->mr_len changed when ->ro_map stopped returning
the full chunk length in the first segment. Count the full length of
each Write chunk, not the length of the first segment (which now can
only be as large as a page).
Fixes: 9d6b040978 ("xprtrdma: Place registered MWs on a ... ")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
This includes decoding Write and Reply chunks, and fixing up inline
payloads.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
This change improves Receive efficiency by posting Receives only
on the same CPU that handles Receive completion. Improved latency
and throughput has been noted with this change.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Clean up: Code review suggested that a common bit of code can be
placed into a helper function, and this gives us fewer places to
stick an "I DMA unmapped something" trace point.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: struct rpcrdma_mw was named after Memory Windows, but
xprtrdma no longer supports a Memory Window registration mode.
Rename rpcrdma_mw and its fields to reduce confusion and make
the code more sensible to read.
Renaming "mw" was suggested by Tom Talpey, the author of the
original xprtrdma implementation. It's a good idea, but I haven't
done this until now because it's a huge diffstat for no benefit
other than code readability.
However, I'm about to introduce static trace points that expose
a few of xprtrdma's internal data structures. They should make sense
in the trace report, and it's reasonable to treat trace points as a
kernel API contract which might be difficult to change later.
While I'm churning things up, two additional changes:
- rename variables unhelpfully called "r" to "mr", to improve code
clarity, and
- rename the MR-related helper functions using the form
"rpcrdma_mr_<verb>", to be consistent with other areas of the
code.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: Over time, the industry has adopted the term "frwr"
instead of "frmr". The term "frwr" is now more widely recognized.
For the past couple of years I've attempted to add new code using
"frwr" , but there still remains plenty of older code that still
uses "frmr". Replace all usage of "frmr" to avoid confusion.
While we're churning code, rename variables unhelpfully called "f"
to "frwr", to improve code clarity.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
No need for the overhead of atomically setting and clearing this bit
flag for every use of a pre-allocated backchannel rpc_rqst. These
are a distinct pool of rpc_rqsts that are used only for callback
operations, so it is safe to simply leave the bit set.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up. @rqst is set up differently for backchannel Replies. For
example, rqst->rq_task and task->tk_client are both NULL. So it is
easier to understand and maintain this code path if it is separated.
Also, we can get rid of the confusing rl_connect_cookie hack in
rpcrdma_bc_receive_call.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Since commit 5a6d1db455 ("SUNRPC: Add a transport-specific private
field in rpc_rqst"), the rpc_rqst's for RPC-over-RDMA backchannel
operations leave rq_buffer set to NULL.
xprt_release does not invoke ->op->buf_free when rq_buffer is NULL.
The RPCRDMA_REQ_F_BACKCHANNEL check in xprt_rdma_free is therefore
redundant because xprt_rdma_free is not invoked for backchannel
requests.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up. This logic is related to marshaling the request, and I'd
like to keep everything that touches req->rl_registered close
together, for CPU cache efficiency.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up a harmless oversight. xprtrdma's ->set_port method has
never properly supported IPv6.
This issue has never been a problem because NFS/RDMA mounts have
always required "port=20049", thus so far, rpcbind is not invoked
for these mounts.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Save more space in struct rpcrdma_xprt by removing the redundant
"addr" field from struct rpcrdma_create_data_internal. Wherever
we have rpcrdma_xprt, we also have the rpc_xprt, which has a
sockaddr_storage field with the same content.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
This makes the address strings available for debugging messages in
earlier stages of transport set up.
The first benefit is to get rid of the single-use rep_remote_addr
field, saving 128+ bytes in struct rpcrdma_ep.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up. Remove fields that should have been removed by
commit b3221d6a53 ("xprtrdma: Remove logic that constructs
RDMA_MSGP type calls").
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up.
Commit b5f0afbea4 ("xprtrdma: Per-connection pad optimization")
should have removed this.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Refactoring change: Remote Invalidation is particular to the memory
registration mode that is use. Use a callout instead of a generic
function to handle Remote Invalidation.
This gets rid of the 8-byte flags field in struct rpcrdma_mw, of
which only a single bit flag has been allocated.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
The rpcrdma_req is not shared yet, and its associated Send hasn't
been posted, thus RMW should be safe. There's no need for the
expense of a lock cycle here.
Fixes: 0ba6f37012 ("xprtrdma: Refactor rpcrdma_deferred_completion")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
The backchannel code uses rpcrdma_recv_buffer_put to add new reps
to the free rep list. This also decrements rb_recv_count, which
spoofs the receive overrun logic in rpcrdma_buffer_get_rep.
Commit 9b06688bc3 ("xprtrdma: Fix additional uses of
spin_lock_irqsave(rb_lock)") replaced the original open-coded
list_add with a call to rpcrdma_recv_buffer_put(), but then a year
later, commit 05c974669e ("xprtrdma: Fix receive buffer
accounting") added rep accounting to rpcrdma_recv_buffer_put.
It was an oversight to let the backchannel continue to use this
function.
The fix this, let's combine the "add to free list" logic with
rpcrdma_create_rep.
Also, do not allocate RPCRDMA_MAX_BC_REQUESTS rpcrdma_reps in
rpcrdma_buffer_create and then allocate additional rpcrdma_reps in
rpcrdma_bc_setup_reps. Allocating the extra reps during backchannel
set-up is sufficient.
Fixes: 05c974669e ("xprtrdma: Fix receive buffer accounting")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
This leak has been around forever, and is exceptionally rare.
EINVAL causes mount to fail with "an incorrect mount option was
specified" although it's not likely that one of the mount
options is incorrect. Instead, return ENODEV in this case, as this
appears to be an issue with system or device configuration rather
than a specific mount option.
Some obsolete comments are also removed.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Stable bugfixes:
- NFS: Avoid a BUG_ON() in nfs_commit_inode() by not waiting for a
commit in the case that there were no commit requests.
- SUNRPC: Fix a race in the receive code path
Other fixes:
- NFS: Fix a deadlock in nfs client initialization
- xprtrdma: Fix a performance regression for small IOs
-----BEGIN PGP SIGNATURE-----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=XhEC
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-4.15-3' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client fixes from Anna Schumaker:
"This has two stable bugfixes, one to fix a BUG_ON() when
nfs_commit_inode() is called with no outstanding commit requests and
another to fix a race in the SUNRPC receive codepath.
Additionally, there are also fixes for an NFS client deadlock and an
xprtrdma performance regression.
Summary:
Stable bugfixes:
- NFS: Avoid a BUG_ON() in nfs_commit_inode() by not waiting for a
commit in the case that there were no commit requests.
- SUNRPC: Fix a race in the receive code path
Other fixes:
- NFS: Fix a deadlock in nfs client initialization
- xprtrdma: Fix a performance regression for small IOs"
* tag 'nfs-for-4.15-3' of git://git.linux-nfs.org/projects/anna/linux-nfs:
SUNRPC: Fix a race in the receive code path
nfs: don't wait on commit in nfs_commit_inode() if there were no commit requests
xprtrdma: Spread reply processing over more CPUs
nfs: fix a deadlock in nfs client initialization
Commit d8f532d20e ("xprtrdma: Invoke rpcrdma_reply_handler
directly from RECV completion") introduced a performance regression
for NFS I/O small enough to not need memory registration. In multi-
threaded benchmarks that generate primarily small I/O requests,
IOPS throughput is reduced by nearly a third. This patch restores
the previous level of throughput.
Because workqueues are typically BOUND (in particular ib_comp_wq,
nfsiod_workqueue, and rpciod_workqueue), NFS/RDMA workloads tend
to aggregate on the CPU that is handling Receive completions.
The usual approach to addressing this problem is to create a QP
and CQ for each CPU, and then schedule transactions on the QP
for the CPU where you want the transaction to complete. The
transaction then does not require an extra context switch during
completion to end up on the same CPU where the transaction was
started.
This approach doesn't work for the Linux NFS/RDMA client because
currently the Linux NFS client does not support multiple connections
per client-server pair, and the RDMA core API does not make it
straightforward for ULPs to determine which CPU is responsible for
handling Receive completions for a CQ.
So for the moment, record the CPU number in the rpcrdma_req before
the transport sends each RPC Call. Then during Receive completion,
queue the RPC completion on that same CPU.
Additionally, move all RPC completion processing to the deferred
handler so that even RPCs with simple small replies complete on
the CPU that sent the corresponding RPC Call.
Fixes: d8f532d20e ("xprtrdma: Invoke rpcrdma_reply_handler ...")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
- fix a number of races in the NFSv4+ state code.
- fix some shutdown crashes in multiple-network-namespace cases.
- relax our 4.1 session limits; if you've an artificially low limit
to the number of 4.1 clients that can mount simultaneously, try
upgrading.
-----BEGIN PGP SIGNATURE-----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=PBs+
-----END PGP SIGNATURE-----
Merge tag 'nfsd-4.15' of git://linux-nfs.org/~bfields/linux
Pull nfsd updates from Bruce Fields:
"Lots of good bugfixes, including:
- fix a number of races in the NFSv4+ state code
- fix some shutdown crashes in multiple-network-namespace cases
- relax our 4.1 session limits; if you've an artificially low limit
to the number of 4.1 clients that can mount simultaneously, try
upgrading"
* tag 'nfsd-4.15' of git://linux-nfs.org/~bfields/linux: (22 commits)
SUNRPC: Improve ordering of transport processing
nfsd: deal with revoked delegations appropriately
svcrdma: Enqueue after setting XPT_CLOSE in completion handlers
nfsd: use nfs->ns.inum as net ID
rpc: remove some BUG()s
svcrdma: Preserve CB send buffer across retransmits
nfds: avoid gettimeofday for nfssvc_boot time
fs, nfsd: convert nfs4_file.fi_ref from atomic_t to refcount_t
fs, nfsd: convert nfs4_cntl_odstate.co_odcount from atomic_t to refcount_t
fs, nfsd: convert nfs4_stid.sc_count from atomic_t to refcount_t
lockd: double unregister of inetaddr notifiers
nfsd4: catch some false session retries
nfsd4: fix cached replies to solo SEQUENCE compounds
sunrcp: make function _svc_create_xprt static
SUNRPC: Fix tracepoint storage issues with svc_recv and svc_rqst_status
nfsd: use ARRAY_SIZE
nfsd: give out fewer session slots as limit approaches
nfsd: increase DRC cache limit
nfsd: remove unnecessary nofilehandle checks
nfs_common: convert int to bool
...
Stable bugfixes:
- Revalidate "." and ".." correctly on open
- Avoid RCU usage in tracepoints
- Fix ugly referral attributes
- Fix a typo in nomigration mount option
- Revert "NFS: Move the flock open mode check into nfs_flock()"
Features:
- Implement a stronger send queue accounting system for NFS over RDMA
- Switch some atomics to the new refcount_t type
Other bugfixes and cleanups:
- Clean up access mode bits
- Remove special-case revalidations in nfs_opendir()
- Improve invalidating NFS over RDMA memory for async operations that time out
- Handle NFS over RDMA replies with a worqueue
- Handle NFS over RDMA sends with a workqueue
- Fix up replaying interrupted requests
- Remove dead NFS over RDMA definitions
- Update NFS over RDMA copyright information
- Be more consistent with bool initialization and comparisons
- Mark expected switch fall throughs
- Various sunrpc tracepoint cleanups
- Fix various OPEN races
- Fix a typo in nfs_rename()
- Use common error handling code in nfs_lock_and_join_request()
- Check that some structures are properly cleaned up during net_exit()
- Remove net pointer from dprintk()s
-----BEGIN PGP SIGNATURE-----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=2Zc1
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-4.15-1' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client updates from Anna Schumaker:
"Stable bugfixes:
- Revalidate "." and ".." correctly on open
- Avoid RCU usage in tracepoints
- Fix ugly referral attributes
- Fix a typo in nomigration mount option
- Revert "NFS: Move the flock open mode check into nfs_flock()"
Features:
- Implement a stronger send queue accounting system for NFS over RDMA
- Switch some atomics to the new refcount_t type
Other bugfixes and cleanups:
- Clean up access mode bits
- Remove special-case revalidations in nfs_opendir()
- Improve invalidating NFS over RDMA memory for async operations that
time out
- Handle NFS over RDMA replies with a worqueue
- Handle NFS over RDMA sends with a workqueue
- Fix up replaying interrupted requests
- Remove dead NFS over RDMA definitions
- Update NFS over RDMA copyright information
- Be more consistent with bool initialization and comparisons
- Mark expected switch fall throughs
- Various sunrpc tracepoint cleanups
- Fix various OPEN races
- Fix a typo in nfs_rename()
- Use common error handling code in nfs_lock_and_join_request()
- Check that some structures are properly cleaned up during
net_exit()
- Remove net pointer from dprintk()s"
* tag 'nfs-for-4.15-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (62 commits)
NFS: Revert "NFS: Move the flock open mode check into nfs_flock()"
NFS: Fix typo in nomigration mount option
nfs: Fix ugly referral attributes
NFS: super: mark expected switch fall-throughs
sunrpc: remove net pointer from messages
nfs: remove net pointer from messages
sunrpc: exit_net cleanup check added
nfs client: exit_net cleanup check added
nfs/write: Use common error handling code in nfs_lock_and_join_requests()
NFSv4: Replace closed stateids with the "invalid special stateid"
NFSv4: nfs_set_open_stateid must not trigger state recovery for closed state
NFSv4: Check the open stateid when searching for expired state
NFSv4: Clean up nfs4_delegreturn_done
NFSv4: cleanup nfs4_close_done
NFSv4: Retry NFS4ERR_OLD_STATEID errors in layoutreturn
pNFS: Retry NFS4ERR_OLD_STATEID errors in layoutreturn-on-close
NFSv4: Don't try to CLOSE if the stateid 'other' field has changed
NFSv4: Retry CLOSE and DELEGRETURN on NFS4ERR_OLD_STATEID.
NFS: Fix a typo in nfs_rename()
NFSv4: Fix open create exclusive when the server reboots
...
Credit work contributed by Oracle engineers since 2014.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up. This include should have been removed by
commit 23826c7aea ("xprtrdma: Serialize credit accounting again").
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: C-structure style XDR encoding and decoding logic has
been replaced over the past several merge windows on both the
client and server. These data structures are no longer used.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Lift the Send and LocalInv completion handlers out of soft IRQ mode
to make room for other work. Also, move the Send CQ to a different
CPU than the CPU where the Receive CQ is running, for improved
scalability.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
The sendctx circular queue now guarantees that xprtrdma cannot
overflow the Send Queue, so remove the remaining bits of the
original Send WQE counting mechanism.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
When an RPC Call includes a file data payload, that payload can come
from pages in the page cache, or a user buffer (for direct I/O).
If the payload can fit inline, xprtrdma includes it in the Send
using a scatter-gather technique. xprtrdma mustn't allow the RPC
consumer to re-use the memory where that payload resides before the
Send completes. Otherwise, the new contents of that memory would be
exposed by an HCA retransmit of the Send operation.
So, block RPC completion on Send completion, but only in the case
where a separate file data payload is part of the Send. This
prevents the reuse of that memory while it is still part of a Send
operation without an undue cost to other cases.
Waiting is avoided in the common case because typically the Send
will have completed long before the RPC Reply arrives.
These days, an RPC timeout will trigger a disconnect, which tears
down the QP. The disconnect flushes all waiting Sends. This bounds
the amount of time the reply handler has to wait for a Send
completion.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Invoke a common routine for releasing hardware resources (for
example, invalidating MRs). This needs to be done whether an
RPC Reply has arrived or the RPC was terminated early.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
We have one boolean flag in rpcrdma_req today. I'd like to add more
flags, so convert that boolean to a bit flag.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Problem statement:
Recently Sagi Grimberg <sagi@grimberg.me> observed that kernel RDMA-
enabled storage initiators don't handle delayed Send completion
correctly. If Send completion is delayed beyond the end of a ULP
transaction, the ULP may release resources that are still being used
by the HCA to complete a long-running Send operation.
This is a common design trait amongst our initiators. Most Send
operations are faster than the ULP transaction they are part of.
Waiting for a completion for these is typically unnecessary.
Infrequently, a network partition or some other problem crops up
where an ordering problem can occur. In NFS parlance, the RPC Reply
arrives and completes the RPC, but the HCA is still retrying the
Send WR that conveyed the RPC Call. In this case, the HCA can try
to use memory that has been invalidated or DMA unmapped, and the
connection is lost. If that memory has been re-used for something
else (possibly not related to NFS), and the Send retransmission
exposes that data on the wire.
Thus we cannot assume that it is safe to release Send-related
resources just because a ULP reply has arrived.
After some analysis, we have determined that the completion
housekeeping will not be difficult for xprtrdma:
- Inline Send buffers are registered via the local DMA key, and
are already left DMA mapped for the lifetime of a transport
connection, thus no additional handling is necessary for those
- Gathered Sends involving page cache pages _will_ need to
DMA unmap those pages after the Send completes. But like
inline send buffers, they are registered via the local DMA key,
and thus will not need to be invalidated
In addition, RPC completion will need to wait for Send completion
in the latter case. However, nearly always, the Send that conveys
the RPC Call will have completed long before the RPC Reply
arrives, and thus no additional latency will be accrued.
Design notes:
In this patch, the rpcrdma_sendctx object is introduced, and a
lock-free circular queue is added to manage a set of them per
transport.
The RPC client's send path already prevents sending more than one
RPC Call at the same time. This allows us to treat the consumer
side of the queue (rpcrdma_sendctx_get_locked) as if there is a
single consumer thread.
The producer side of the queue (rpcrdma_sendctx_put_locked) is
invoked only from the Send completion handler, which is a single
thread of execution (soft IRQ).
The only care that needs to be taken is with the tail index, which
is shared between the producer and consumer. Only the producer
updates the tail index. The consumer compares the head with the
tail to ensure that the a sendctx that is in use is never handed
out again (or, expressed more conventionally, the queue is empty).
When the sendctx queue empties completely, there are enough Sends
outstanding that posting more Send operations can result in a Send
Queue overflow. In this case, the ULP is told to wait and try again.
This introduces strong Send Queue accounting to xprtrdma.
As a final touch, Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
suggested a mechanism that does not require signaling every Send.
We signal once every N Sends, and perform SGE unmapping of N Send
operations during that one completion.
Reported-by: Sagi Grimberg <sagi@grimberg.me>
Suggested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Commit 655fec6987 ("xprtrdma: Use gathered Send for large inline
messages") assumed that, since the zeroeth element of the Send SGE
array always pointed to req->rl_rdmabuf, it needed to be initialized
just once. This was a valid assumption because the Send SGE array
and rl_rdmabuf both live in the same rpcrdma_req.
In a subsequent patch, the Send SGE array will be separated from the
rpcrdma_req, so the zeroeth element of the SGE array needs to be
initialized every time.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: Make rpcrdma_prepare_send_sges() return a negative errno
instead of a bool. Soon callers will want distinct treatments of
different types of failures.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
When this function fails, it needs to undo the DMA mappings it's
done so far. Otherwise these are leaked.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up. rpcrdma_prepare_hdr_sge() sets num_sge to one, then
rpcrdma_prepare_msg_sges() sets num_sge again to the count of SGEs
it added, plus one for the header SGE just mapped in
rpcrdma_prepare_hdr_sge(). This is confusing, and nails in an
assumption about when these functions are called.
Instead, maintain a running count that both functions can update
with just the number of SGEs they have added to the SGE array.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
We need to decode and save the incoming rdma_credits field _after_
we know that the direction of the message is "forward direction
Reply". Otherwise, the credits value in reverse direction Calls is
also used to update the forward direction credits.
It is safe to decode the rdma_credits field in rpcrdma_reply_handler
now that rpcrdma_reply_handler is single-threaded. Receives complete
in the same order as they were sent on the NFS server.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
I noticed that the soft IRQ thread looked pretty busy under heavy
I/O workloads. perf suggested one area that was expensive was the
queue_work() call in rpcrdma_wc_receive. That gave me some ideas.
Instead of scheduling a separate worker to process RPC Replies,
promote the Receive completion handler to IB_POLL_WORKQUEUE, and
invoke rpcrdma_reply_handler directly.
Note that the poll workqueue is single-threaded. In order to keep
memory invalidation from serializing all RPC Replies, handle any
necessary invalidation tasks in a separate multi-threaded workqueue.
This provides a two-tier scheme, similar to OS I/O interrupt
handlers: A fast interrupt handler that schedules the slow handler
and re-enables the interrupt, and a slower handler that is invoked
for any needed heavy lifting.
Benefits include:
- One less context switch for RPCs that don't register memory
- Receive completion handling is moved out of soft IRQ context to
make room for other users of soft IRQ
- The same CPU core now DMA syncs and XDR decodes the Receive buffer
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: I'd like to be able to invoke the tail of
rpcrdma_reply_handler in two different places. Split the tail out
into its own helper function.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: Make it easier to pass the decoded XID, vers, credits, and
proc fields around by moving these variables into struct rpcrdma_rep.
Note: the credits field will be handled in a subsequent patch.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
A reply with an unrecognized value in the version field means the
transport header is potentially garbled and therefore all the fields
are untrustworthy.
Fixes: 59aa1f9a3c ("xprtrdma: Properly handle RDMA_ERROR ... ")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
I noticed the server was sometimes not closing the connection after
a flushed Send. For example, if the client responds with an RNR NAK
to a Reply from the server, that client might be deadlocked, and
thus wouldn't send any more traffic. Thus the server wouldn't have
any opportunity to notice the XPT_CLOSE bit has been set.
Enqueue the transport so that svcxprt notices the bit even if there
is no more transport activity after a flushed completion, QP access
error, or device removal event.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-By: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Clean up: There are no remaining callers of this method.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
The "safe" version of ro_unmap is used here to avoid waiting
unnecessarily. However:
- It is safe to wait. After all, we have to wait anyway when using
FMR to register memory.
- This case is rare: it occurs only after a reconnect.
By switching this call site to ro_unmap_sync, the final use of
ro_unmap_safe is removed.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
In current kernels, waiting in xprt_release appears to be safe to
do. I had erroneously believed that for ASYNC RPCs, waiting of any
kind in xprt_release->xprt_rdma_free would result in deadlock. I've
done injection testing and consulted with Trond to confirm that
waiting in the RPC release path is safe.
For the very few times where RPC resources haven't yet been released
earlier by the reply handler, it is safe to wait synchronously in
xprt_rdma_free for invalidation rather than defering it to MR
recovery.
Note: When the QP is error state, posting a LocalInvalidate should
flush and mark the MR as bad. There is no way the remote HCA can
access that MR via a QP in error state, so it is effectively already
inaccessible and thus safe for the Upper Layer to access. The next
time the MR is used it should be recognized and cleaned up properly
by frwr_op_map.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
The ib_mr->length represents the length of the MR in bytes as per
the IBTA spec 1.3 section 11.2.10.3 (REGISTER PHYSICAL MEMORY REGION).
Currently ib_mr->length field is defined as only 32-bits field.
This might result into truncation and failed WRs of consumers who
registers more than 4GB bytes memory regions and whose WRs accessing
such MRs.
This patch makes the length 64-bit to avoid such truncation.
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Faisal Latif <faisal.latif@intel.com>
Fixes: 4c67e2bfc8 ("IB/core: Introduce new fast registration API")
Signed-off-by: Ilya Lesokhin <ilyal@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Hightlights include:
Stable bugfixes:
- Fix mirror allocation in the writeback code to avoid a use after free
- Fix the O_DSYNC writes to use the correct byte range
- Fix 2 use after free issues in the I/O code
Features:
- Writeback fixes to split up the inode->i_lock in order to reduce contention
- RPC client receive fixes to reduce the amount of time the
xprt->transport_lock is held when receiving data from a socket into am
XDR buffer.
- Ditto fixes to reduce contention between call side users of the rdma
rb_lock, and its use in rpcrdma_reply_handler.
- Re-arrange rdma stats to reduce false cacheline sharing.
- Various rdma cleanups and optimisations.
- Refactor the NFSv4.1 exchange id code and clean up the code.
- Const-ify all instances of struct rpc_xprt_ops
Bugfixes:
- Fix the NFSv2 'sec=' mount option.
- NFSv4.1: don't use machine credentials for CLOSE when using 'sec=sys'
- Fix the NFSv3 GRANT callback when the port changes on the server.
- Fix livelock issues with COMMIT
- NFSv4: Use correct inode in _nfs4_opendata_to_nfs4_state() when doing
and NFSv4.1 open by filehandle.
-----BEGIN PGP SIGNATURE-----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=1Ssl
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-4.14-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client updates from Trond Myklebust:
"Hightlights include:
Stable bugfixes:
- Fix mirror allocation in the writeback code to avoid a use after
free
- Fix the O_DSYNC writes to use the correct byte range
- Fix 2 use after free issues in the I/O code
Features:
- Writeback fixes to split up the inode->i_lock in order to reduce
contention
- RPC client receive fixes to reduce the amount of time the
xprt->transport_lock is held when receiving data from a socket into
am XDR buffer.
- Ditto fixes to reduce contention between call side users of the
rdma rb_lock, and its use in rpcrdma_reply_handler.
- Re-arrange rdma stats to reduce false cacheline sharing.
- Various rdma cleanups and optimisations.
- Refactor the NFSv4.1 exchange id code and clean up the code.
- Const-ify all instances of struct rpc_xprt_ops
Bugfixes:
- Fix the NFSv2 'sec=' mount option.
- NFSv4.1: don't use machine credentials for CLOSE when using
'sec=sys'
- Fix the NFSv3 GRANT callback when the port changes on the server.
- Fix livelock issues with COMMIT
- NFSv4: Use correct inode in _nfs4_opendata_to_nfs4_state() when
doing and NFSv4.1 open by filehandle"
* tag 'nfs-for-4.14-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (69 commits)
NFS: Count the bytes of skipped subrequests in nfs_lock_and_join_requests()
NFS: Don't hold the group lock when calling nfs_release_request()
NFS: Remove pnfs_generic_transfer_commit_list()
NFS: nfs_lock_and_join_requests and nfs_scan_commit_list can deadlock
NFS: Fix 2 use after free issues in the I/O code
NFS: Sync the correct byte range during synchronous writes
lockd: Delete an error message for a failed memory allocation in reclaimer()
NFS: remove jiffies field from access cache
NFS: flush data when locking a file to ensure cache coherence for mmap.
SUNRPC: remove some dead code.
NFS: don't expect errors from mempool_alloc().
xprtrdma: Use xprt_pin_rqst in rpcrdma_reply_handler
xprtrdma: Re-arrange struct rx_stats
NFS: Fix NFSv2 security settings
NFSv4.1: don't use machine credentials for CLOSE when using 'sec=sys'
SUNRPC: ECONNREFUSED should cause a rebind.
NFS: Remove unused parameter gfp_flags from nfs_pageio_init()
NFSv4: Fix up mirror allocation
SUNRPC: Add a separate spinlock to protect the RPC request receive list
SUNRPC: Cleanup xs_tcp_read_common()
...
Adopt the use of xprt_pin_rqst to eliminate contention between
Call-side users of rb_lock and the use of rb_lock in
rpcrdma_reply_handler.
This replaces the mechanism introduced in 431af645cf ("xprtrdma:
Fix client lock-up after application signal fires").
Use recv_lock to quickly find the completing rqst, pin it, then
drop the lock. At that point invalidation and pull-up of the Reply
XDR can be done. Both are often expensive operations.
Finally, take recv_lock again to signal completion to the RPC
layer. It also protects adjustment of "cwnd".
This greatly reduces the amount of time a lock is held by the
reply handler. Comparing lock_stat results shows a marked decrease
in contention on rb_lock and recv_lock.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
[trond.myklebust@primarydata.com: Remove call to rpcrdma_buffer_put() from
the "out_norqst:" path in rpcrdma_reply_handler.]
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
The rdma_rw API adjusts max_send_wr upwards during the
rdma_create_qp() call. If the ULP actually wants to take advantage
of these extra resources, it must increase the size of its send
completion queue (created before rdma_create_qp is called) and
increase its send queue accounting limit.
Use the new rdma_rw_mr_factor API to figure out the correct value
to use for the Send Queue and Send Completion Queue depths.
And, ensure that the chosen Send Queue depth for a newly created
transport does not overrun the QP WR limit of the underlying device.
Lastly, there's no longer a need to carry the Send Queue depth in
struct svcxprt_rdma, since the value is used only in the
svc_rdma_accept() path.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Ensure that the chosen Receive Queue depth for a newly created
transport does not overrun the QP WR limit of the underlying device.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
So that NFS WRITE payloads can eventually be placed directly into a
file's page cache, enable the RPC-over-RDMA transport to present
these payloads in the xdr_buf's page list, while placing trailing
content (such as a GETATTR operation) in the xdr_buf's tail.
After this change, the RPC-over-RDMA's "copy tail" hack, added by
commit a97c331f9a ("svcrdma: Handle additional inline content"),
is no longer needed and can be removed.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Dan Carpenter <dan.carpenter@oracle.com> observed that the while()
loop in svc_rdma_build_read_chunk() does not document the assumption
that the loop interior is always executed at least once.
Defensive: the function now returns -EINVAL if this assumption
fails.
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Close an attack vector by moving the arrays of server-side transport
methods to read-only memory.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
To reduce false cacheline sharing, separate counters that are likely
to be accessed in the Call path from those accessed in the Reply
path.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
This further reduces contention with the transport_lock, and allows us
to convert to using a non-bh-safe spinlock, since the list is now never
accessed from a bh context.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Re-arrange the pointer arithmetic in the chunk list encoders to
eliminate several more integer multiplication instructions during
Transport Header encoding.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Re-arrange the pointer arithmetic in rpcrdma_convert_iovs() to
eliminate several integer multiplication instructions during
Transport Header encoding.
Also, array overflow does not occur outside development
environments, so replace overflow checking with one spot check
at the end. This reduces the number of conditional branches in
the common case.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Same changes as in rpcrdma_marshal_req(). This removes
C-structure style encoding from the backchannel.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
While marshaling chunk lists which are variable-length XDR objects,
check for XDR buffer overflow at every step. Measurements show no
significant changes in CPU utilization.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Initialize an xdr_stream at the top of rpcrdma_marshal_req(), and
use it to encode the fixed transport header fields. This xdr_stream
will be used to encode the chunk lists in a subsequent patch.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: Remove a variable whose result is no longer used.
Commit 655fec6987 ("xprtrdma: Use gathered Send for large inline
messages") should have removed it.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: The caller already has rpcrdma_xprt, so pass that directly
instead. And provide a documenting comment for this critical
function.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: Replace C-structure based XDR decoding for consistency
with other areas.
struct rpcrdma_rep is rearranged slightly so that the relevant fields
are in cache when the Receive completion handler is invoked.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
This field is no longer used outside the Receive completion handler.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: The opcode check is no longer necessary, because since
commit 2fa8f88d88 ("xprtrdma: Use new CQ API for RPC-over-RDMA
client send CQs"), this completion handler is invoked only for
RECV work requests.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up chunk list decoding by using the xdr_stream set up in
rpcrdma_reply_handler. This hardens decoding by checking for buffer
overflow at every step while unmarshaling variable-length XDR
objects.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Refactor the reply handler's transport header decoding logic to make
it easier to understand and update.
Convert some of the handler to use xdr_streams, which will enable
stricter validation of input data and enable the eventual addition
of support for new combinations of chunks, such as "Write + Reply"
or "PZRC + normal Read".
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Transport header decoding deals with untrusted input data, therefore
decoding this header needs to be hardened.
Adopt the same infrastructure that is used when XDR decoding NFS
replies. This is slightly more CPU-intensive than the replaced code,
but we're not adding new atomics, locking, or context switches. The
cost is manageable.
Start by initializing an xdr_stream in rpcrdma_reply_handler().
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
After transport instance creation, these function pointers never
change. Mark them as constant to prevent their use as an attack
vector for code injections.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Stable bugfixes:
- Fix -EACCESS on commit to DS handling
- Fix initialization of nfs_page_array->npages
- Only invalidate dentries that are actually invalid
Features:
- Enable NFSoRDMA transparent state migration
- Add support for lookup-by-filehandle
- Add support for nfs re-exporting
Other bugfixes and cleanups:
- Christoph cleaned up the way we declare NFS operations
- Clean up various internal structures
- Various cleanups to commits
- Various improvements to error handling
- Set the dt_type of . and .. entries in NFS v4
- Make slot allocation more reliable
- Fix fscache stat printing
- Fix uninitialized variable warnings
- Fix potential list overrun in nfs_atomic_open()
- Fix a race in NFSoRDMA RPC reply handler
- Fix return size for nfs42_proc_copy()
- Fix against MAC forgery timing attacks
-----BEGIN PGP SIGNATURE-----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=OpLj
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-4.13-1' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client updates from Anna Schumaker:
"Stable bugfixes:
- Fix -EACCESS on commit to DS handling
- Fix initialization of nfs_page_array->npages
- Only invalidate dentries that are actually invalid
Features:
- Enable NFSoRDMA transparent state migration
- Add support for lookup-by-filehandle
- Add support for nfs re-exporting
Other bugfixes and cleanups:
- Christoph cleaned up the way we declare NFS operations
- Clean up various internal structures
- Various cleanups to commits
- Various improvements to error handling
- Set the dt_type of . and .. entries in NFS v4
- Make slot allocation more reliable
- Fix fscache stat printing
- Fix uninitialized variable warnings
- Fix potential list overrun in nfs_atomic_open()
- Fix a race in NFSoRDMA RPC reply handler
- Fix return size for nfs42_proc_copy()
- Fix against MAC forgery timing attacks"
* tag 'nfs-for-4.13-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (68 commits)
NFS: Don't run wake_up_bit() when nobody is waiting...
nfs: add export operations
nfs4: add NFSv4 LOOKUPP handlers
nfs: add a nfs_ilookup helper
nfs: replace d_add with d_splice_alias in atomic_open
sunrpc: use constant time memory comparison for mac
NFSv4.2 fix size storage for nfs42_proc_copy
xprtrdma: Fix documenting comments in frwr_ops.c
xprtrdma: Replace PAGE_MASK with offset_in_page()
xprtrdma: FMR does not need list_del_init()
xprtrdma: Demote "connect" log messages
NFSv4.1: Use seqid returned by EXCHANGE_ID after state migration
NFSv4.1: Handle EXCHGID4_FLAG_CONFIRMED_R during NFSv4.1 migration
xprtrdma: Don't defer MR recovery if ro_map fails
xprtrdma: Fix FRWR invalidation error recovery
xprtrdma: Fix client lock-up after application signal fires
xprtrdma: Rename rpcrdma_req::rl_free
xprtrdma: Pass only the list of registered MRs to ro_unmap_sync
xprtrdma: Pre-mark remotely invalidated MRs
xprtrdma: On invalidation failure, remove MWs from rl_registered
...
Clean up.
FASTREG and LOCAL_INV WRs are typically not signaled. localinv_wake
is used for the last LOCAL_INV WR in a chain, which is always
signaled. The documenting comments should reflect that.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up.
Commit 38f1932e60 ("xprtrdma: Remove FMRs from the unmap list
after unmapping") utilized list_del_init() to try to prevent some
list corruption. The corruption was actually caused by the reply
handler racing with a signal. Now that MR invalidation is properly
serialized, list_del_init() can safely be replaced.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Some have complained about the log messages generated when xprtrdma
opens or closes a connection to a server. When an NFS mount is
mostly idle these can appear every few minutes as the client idles
out the connection and reconnects.
Connection and disconnection is a normal part of operation, and not
exceptional, so change these to dprintk's for now. At some point
all of these will be converted to tracepoints, but that's for
another day.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Deferred MR recovery does a DMA-unmapping of the MW. However, ro_map
invokes rpcrdma_defer_mr_recovery in some error cases where the MW
has not even been DMA-mapped yet.
Avoid a DMA-unmapping error replacing rpcrdma_defer_mr_recovery.
Also note that if ib_dma_map_sg is asked to map 0 nents, it will
return 0. So the extra "if (i == 0)" check is no longer needed.
Fixes: 42fe28f607 ("xprtrdma: Do not leak an MW during a DMA ...")
Fixes: 505bbe64dd ("xprtrdma: Refactor MR recovery work queues")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
When ib_post_send() fails, all LOCAL_INV WRs past @bad_wr have to be
examined, and the MRs reset by hand.
I'm not sure how the existing code can work by comparing R_keys.
Restructure the logic so that instead it walks the chain of WRs,
starting from the first bad one.
Make sure to wait for completion if at least one WR was actually
posted. Otherwise, if the ib_post_send fails, we can end up
DMA-unmapping the MR while LOCAL_INV operations are in flight.
Commit 7a89f9c626 ("xprtrdma: Honor ->send_request API contract")
added the rdma_disconnect() call site. The disconnect actually
causes more problems than it solves, and SQ overruns happen only as
a result of software bugs. So remove it.
Fixes: d7a21c1bed ("xprtrdma: Reset MRs in frwr_op_unmap_sync()")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
After a signal, the RPC client aborts synchronous RPCs running on
behalf of the signaled application.
The server is still executing those RPCs, and will write the results
back into the client's memory when it's done. By the time the server
writes the results, that memory is likely being used for other
purposes. Therefore xprtrdma has to immediately invalidate all
memory regions used by those aborted RPCs to prevent the server's
writes from clobbering that re-used memory.
With FMR memory registration, invalidation takes a relatively long
time. In fact, the invalidation is often still running when the
server tries to write the results into the memory regions that are
being invalidated.
This sets up a race between two processes:
1. After the signal, xprt_rdma_free calls ro_unmap_safe.
2. While ro_unmap_safe is still running, the server replies and
rpcrdma_reply_handler runs, calling ro_unmap_sync.
Both processes invoke ib_unmap_fmr on the same FMR.
The mlx4 driver allows two ib_unmap_fmr calls on the same FMR at
the same time, but HCAs generally don't tolerate this. Sometimes
this can result in a system crash.
If the HCA happens to survive, rpcrdma_reply_handler continues. It
removes the rpc_rqst from rq_list and releases the transport_lock.
This enables xprt_rdma_free to run in another process, and the
rpc_rqst is released while rpcrdma_reply_handler is still waiting
for the ib_unmap_fmr call to finish.
But further down in rpcrdma_reply_handler, the transport_lock is
taken again, and "rqst" is dereferenced. If "rqst" has already been
released, this triggers a general protection fault. Since bottom-
halves are disabled, the system locks up.
Address both issues by reversing the order of the xprt_lookup_rqst
call and the ro_unmap_sync call. Introduce a separate lookup
mechanism for rpcrdma_req's to enable calling ro_unmap_sync before
xprt_lookup_rqst. Now the handler takes the transport_lock once
and holds it for the XID lookup and RPC completion.
BugLink: https://bugzilla.linux-nfs.org/show_bug.cgi?id=305
Fixes: 68791649a7 ('xprtrdma: Invalidate in the RPC reply ... ')
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: I'm about to use the rl_free field for purposes other than
a free list. So use a more generic name.
This is a refactoring change only.
BugLink: https://bugzilla.linux-nfs.org/show_bug.cgi?id=305
Fixes: 68791649a7 ('xprtrdma: Invalidate in the RPC reply ... ')
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
There are rare cases where an rpcrdma_req can be re-used (via
rpcrdma_buffer_put) while the RPC reply handler is still running.
This is due to a signal firing at just the wrong instant.
Since commit 9d6b040978 ("xprtrdma: Place registered MWs on a
per-req list"), rpcrdma_mws are self-contained; ie., they fully
describe an MR and scatterlist, and no part of that information is
stored in struct rpcrdma_req.
As part of closing the above race window, pass only the req's list
of registered MRs to ro_unmap_sync, rather than the rpcrdma_req
itself.
Some extra transport header sanity checking is removed. Since the
client depends on its own recollection of what memory had been
registered, there doesn't seem to be a way to abuse this change.
And, the check was not terribly effective. If the client had sent
Read chunks, the "list_empty" test is negative in both of the
removed cases, which are actually looking for Write or Reply
chunks.
BugLink: https://bugzilla.linux-nfs.org/show_bug.cgi?id=305
Fixes: 68791649a7 ('xprtrdma: Invalidate in the RPC reply ... ')
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
There are rare cases where an rpcrdma_req and its matched
rpcrdma_rep can be re-used, via rpcrdma_buffer_put, while the RPC
reply handler is still using that req. This is typically due to a
signal firing at just the wrong instant.
As part of closing this race window, avoid using the wrong
rpcrdma_rep to detect remotely invalidated MRs. Mark MRs as
invalidated while we are sure the rep is still OK to use.
BugLink: https://bugzilla.linux-nfs.org/show_bug.cgi?id=305
Fixes: 68791649a7 ('xprtrdma: Invalidate in the RPC reply ... ')
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Callers assume the ro_unmap_sync and ro_unmap_safe methods empty
the list of registered MRs. Ensure that all paths through
fmr_op_unmap_sync() remove MWs from that list.
Fixes: 9d6b040978 ("xprtrdma: Place registered MWs on a ... ")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
The current check will always be true and will always jump to
err1, this looks dubious to me. I believe && should be used
instead of ||.
Detected by CoverityScan, CID#1450120 ("Logically Dead Code")
Fixes: 107c1d0a99 ("svcrdma: Avoid Send Queue overflow")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Clean up: No need to save the I/O direction. The functions that
release svc_rdma_chunk_ctxt already know what direction to use.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Clean up: Use offset_in_page() macro instead of open-coding.
Reported-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Clean up: Registration mode details are now handled by the rdma_rw
API, and thus can be removed from svcrdma.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
There's no longer a need to compare each SGE's lkey with the PD's
local_dma_lkey. Now that FRWR is gone, all DMA mappings are for
pages that were registered with this key.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Clean up: Now that the svc_rdma_recvfrom path uses the rdma_rw API,
the details of Read sink buffer registration are dealt with by the
kernel's RDMA core. This cache is no longer used, and can be
removed.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Clean up:
The generic RDMA R/W API conversion of svc_rdma_recvfrom replaced
the Register, Read, and Invalidate completion handlers. Remove the
old ones, which are no longer used.
These handlers shared some helper code with svc_rdma_wc_send. Fold
the wc_common helper back into the one remaining completion handler.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
When an RPC-over-RDMA request is received, the Receive buffer
contains a Transport Header possibly followed by an RPC message.
Even though rq_arg.head[0] (as passed to NFSD) does not contain the
Transport Header header, currently rq_arg.len includes the size of
the Transport Header.
That violates the intent of the xdr_buf API contract. .buflen should
include everything, but .len should be exactly the length of the RPC
message in the buffer.
The rq_arg fields are summed together at the end of
svc_rdma_recvfrom to obtain the correct return value. rq_arg.len
really ought to contain the correct number of bytes already, but it
currently doesn't due to the above misbehavior.
Let's instead ensure that .buflen includes the length of the
transport header, and that .len is always equal to head.iov_len +
.page_len + tail.iov_len .
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The current svcrdma recvfrom code path has a lot of detail about
registration mode and the type of port (iWARP, IB, etc).
Instead, use the RDMA core's generic R/W API. This shares code with
other RDMA-enabled ULPs that manages the gory details of buffer
registration and the posting of RDMA Read Work Requests.
Since the Read list marshaling code is being replaced, I took the
opportunity to replace C structure-based XDR encoding code with more
portable code that uses pointer arithmetic.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
svc_rdma_rw.c already contains helpers for the sendto path.
Introduce helpers for the recvfrom path.
The plan is to replace the local NFSD bespoke code that constructs
and posts RDMA Read Work Requests with calls to the rdma_rw API.
This shares code with other RDMA-enabled ULPs that manages the gory
details of buffer registration and posting Work Requests.
This new code also puts all RDMA_NOMSG-specific logic in one place.
Lastly, the use of rqstp->rq_arg.pages is deprecated in favor of
using rqstp->rq_pages directly, for clarity.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
>From what I can tell, calling ->recvfrom when there is no work to do
is a normal part of operation. This is the only way svc_recv can
tell when there is no more data ready to receive on the transport.
Neither the TCP nor the UDP transport implementations have a
"starve" metric.
The cost of receive starvation accounting is bumping an atomic, which
results in extra (IMO unnecessary) bus traffic between CPU sockets,
while holding a spin lock.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Identify malformed transport headers and unsupported chunk
combinations as early as possible.
- Ensure that segment lengths are not crazy.
- Ensure that the Reply chunk's segment count is not crazy.
With a 1KB inline threshold, the largest number of Write segments
that can be conveyed is about 60 (for a RDMA_NOMSG Reply message).
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Identify malformed transport headers and unsupported chunk
combinations as early as possible.
- Reject RPC-over-RDMA messages that contain more than one Write
chunk, since this implementation does not support more than one per
message.
- Ensure that segment lengths are not crazy.
- Ensure that the chunk's segment count is not crazy.
With a 1KB inline threshold, the largest number of Write segments
that can be conveyed is about 60 (for a RDMA_NOMSG Reply message).
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Identify malformed transport headers and unsupported chunk
combinations as early as possible.
- Reject RPC-over-RDMA messages that contain more than one Read chunk,
since this implementation currently does not support more than one
per RPC transaction.
- Ensure that segment lengths are not crazy.
- Remove the segment count check. With a 1KB inline threshold, the
largest number of Read segments that can be conveyed is about 40
(for a RDMA_NOMSG Call message). This is nowhere near
RPCSVC_MAXPAGES. As far as I can tell, that was just a sanity
check and does not enforce an implementation limit.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
svc_rdma_marshal.c has one remaining exported function --
svc_rdma_xdr_decode_req -- and it has a single call site. Take
the same approach as the sendto path, and move this function
into the source file where it is called.
This is a refactoring change only.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Sanity case: Catch the case where more Work Requests are being
posted to the Send Queue than there are Send Queue Entries.
This might happen if a client sends a chunk with more segments than
there are SQEs for the transport. The server can't send that reply,
so the transport will deadlock unless the client drops the RPC.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The server displays "svcrdma: failed to post Send WR (-107)" in the
kernel log when the client disconnects. This could flood the server's
log, so remove the message.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Omit an extra message for a memory allocation failure in this function.
This issue was detected by using the Coccinelle software.
Link: http://events.linuxfoundation.org/sites/events/files/slides/LCJ16-Refactor_Strings-WSang_0.pdf
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
bugfixes.
-----BEGIN PGP SIGNATURE-----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=Rtl/
-----END PGP SIGNATURE-----
Merge tag 'nfsd-4.12' of git://linux-nfs.org/~bfields/linux
Pull nfsd updates from Bruce Fields:
"Another RDMA update from Chuck Lever, and a bunch of miscellaneous
bugfixes"
* tag 'nfsd-4.12' of git://linux-nfs.org/~bfields/linux: (26 commits)
nfsd: Fix up the "supattr_exclcreat" attributes
nfsd: encoders mustn't use unitialized values in error cases
nfsd: fix undefined behavior in nfsd4_layout_verify
lockd: fix lockd shutdown race
NFSv4: Fix callback server shutdown
SUNRPC: Refactor svc_set_num_threads()
NFSv4.x/callback: Create the callback service through svc_create_pooled
lockd: remove redundant check on block
svcrdma: Clean out old XDR encoders
svcrdma: Remove the req_map cache
svcrdma: Remove unused RDMA Write completion handler
svcrdma: Reduce size of sge array in struct svc_rdma_op_ctxt
svcrdma: Clean up RPC-over-RDMA backchannel reply processing
svcrdma: Report Write/Reply chunk overruns
svcrdma: Clean up RDMA_ERROR path
svcrdma: Use rdma_rw API in RPC reply path
svcrdma: Introduce local rdma_rw API helpers
svcrdma: Clean up svc_rdma_get_inv_rkey()
svcrdma: Add helper to save pages under I/O
svcrdma: Eliminate RPCRDMA_SQ_DEPTH_MULT
...
Clean up: These have been replaced and are no longer used.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
req_maps are no longer used by the send path and can thus be removed.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Clean up. All RDMA Write completions are now handled by
svc_rdma_wc_write_ctx.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The sge array in struct svc_rdma_op_ctxt is no longer used for
sending RDMA Write WRs. It need only accommodate the construction of
Send and Receive WRs. The maximum inline size is the largest payload
it needs to handle now.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Replace C structure-based XDR decoding with pointer arithmetic.
Pointer arithmetic is considered more portable.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Observed at Connectathon 2017.
If a client has underestimated the size of a Write or Reply chunk,
the Linux server writes as much payload data as it can, then it
recognizes there was a problem and closes the connection without
sending the transport header.
This creates a couple of problems:
<> The client never receives indication of the server-side failure,
so it continues to retransmit the bad RPC. Forward progress on
the transport is blocked.
<> The reply payload pages are not moved out of the svc_rqst, thus
they can be released by the RPC server before the RDMA Writes
have completed.
The new rdma_rw-ized helpers return a distinct error code when a
Write/Reply chunk overrun occurs, so it's now easy for the caller
(svc_rdma_sendto) to recognize this case.
Instead of dropping the connection, post an RDMA_ERROR message. The
client now sees an RDMA_ERROR and can properly terminate the RPC
transaction.
As part of the new logic, set up the same delayed release for these
payload pages as would have occurred in the normal case.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Now that svc_rdma_sendto has been renovated, svc_rdma_send_error can
be refactored to reduce code duplication and remove C structure-
based XDR encoding. It is also relocated to the source file that
contains its only caller.
This is a refactoring change only.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The current svcrdma sendto code path posts one RDMA Write WR at a
time. Each of these Writes typically carries a small number of pages
(for instance, up to 30 pages for mlx4 devices). That means a 1MB
NFS READ reply requires 9 ib_post_send() calls for the Write WRs,
and one for the Send WR carrying the actual RPC Reply message.
Instead, use the new rdma_rw API. The details of Write WR chain
construction and memory registration are taken care of in the RDMA
core. svcrdma can focus on the details of the RPC-over-RDMA
protocol. This gives three main benefits:
1. All Write WRs for one RDMA segment are posted in a single chain.
As few as one ib_post_send() for each Write chunk.
2. The Write path can now use FRWR to register the Write buffers.
If the device's maximum page list depth is large, this means a
single Write WR is needed for each RPC's Write chunk data.
3. The new code introduces support for RPCs that carry both a Write
list and a Reply chunk. This combination can be used for an NFSv4
READ where the data payload is large, and thus is removed from the
Payload Stream, but the Payload Stream is still larger than the
inline threshold.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The plan is to replace the local bespoke code that constructs and
posts RDMA Read and Write Work Requests with calls to the rdma_rw
API. This shares code with other RDMA-enabled ULPs that manages the
gory details of buffer registration and posting Work Requests.
Some design notes:
o The structure of RPC-over-RDMA transport headers is flexible,
allowing multiple segments per Reply with arbitrary alignment,
each with a unique R_key. Write and Send WRs continue to be
built and posted in separate code paths. However, one whole
chunk (with one or more RDMA segments apiece) gets exactly
one ib_post_send and one work completion.
o svc_xprt reference counting is modified, since a chain of
rdma_rw_ctx structs generates one completion, no matter how
many Write WRs are posted.
o The current code builds the transport header as it is construct-
ing Write WRs. I've replaced that with marshaling of transport
header data items in a separate step. This is because the exact
structure of client-provided segments may not align with the
components of the server's reply xdr_buf, or the pages in the
page list. Thus parts of each client-provided segment may be
written at different points in the send path.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Replace C structure-based XDR decoding with more portable code that
instead uses pointer arithmetic.
This is a refactoring change only.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Clean up: extract the logic to save pages under I/O into a helper to
add a big documenting comment without adding clutter in the send
path.
This is a refactoring change only.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The Send Queue depth is temporarily reduced to 1 SQE per credit. The
new rdma_rw API does an internal computation, during QP creation, to
increase the depth of the Send Queue to handle RDMA Read and Write
operations.
This change has to come before the NFSD code paths are updated to
use the rdma_rw API. Without this patch, rdma_rw_init_qp() increases
the size of the SQ too much, resulting in memory allocation failures
during QP creation.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Introduce a helper to DMA-map a reply's transport header before
sending it. This will in part replace the map vector cache.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Clean up: Move the ib_send_wr off the stack, and move common code
to post a Send Work Request into a helper.
This is a refactoring change only.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Since commit 1e465fd4ff ("xprtrdma: Replace send and receive
arrays"), this field is no longer used.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
When ro_map is out of buffers, that's not a permanent error, so
don't report a problem.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Micro-optimize the receive workqueue by marking it's anchor "read-
mostly."
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Device removal is now adequately supported. Pinning the underlying
device driver to prevent removal while an NFS mount is active is no
longer necessary.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
After a device removal, enable the transport connect worker to
restore normal operation if there is another device with
connectivity to the server.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
I'm about to add another arm to
if (ep->rep_connected != 0)
It will be cleaner to use a switch statement here. We'll be looking
for a couple of specific errnos, or "anything else," basically to
sort out the difference between a normal reconnect and recovery from
device removal.
This is a refactoring change only.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
The device driver for the underlying physical device associated
with an RPC-over-RDMA transport can be removed while RPC-over-RDMA
transports are still in use (ie, while NFS filesystems are still
mounted and active). The IB core performs a connection event upcall
to request that consumers free all RDMA resources associated with
a transport.
There may be pending RPCs when this occurs. Care must be taken to
release associated resources without leaving references that can
trigger a subsequent crash if a signal or soft timeout occurs. We
rely on the caller of the transport's ->close method to ensure that
the previous RPC task has invoked xprt_release but the transport
remains write-locked.
A DEVICE_REMOVE upcall forces a disconnect then sleeps. When ->close
is invoked, it destroys the transport's H/W resources, then wakes
the upcall, which completes and allows the core driver unload to
continue.
BugLink: https://bugzilla.linux-nfs.org/show_bug.cgi?id=266
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
When the underlying device driver is reloaded, ia->ri_device will be
replaced. All cached copies of that device pointer have to be
updated as well.
Commit 54cbd6b0c6 ("xprtrdma: Delay DMA mapping Send and Receive
buffers") added the rg_device field to each regbuf. As part of
handling a device removal, rpcrdma_dma_unmap_regbuf is invoked on
all regbufs for a transport.
Simply calling rpcrdma_dma_map_regbuf for each Receive buffer after
the driver has been reloaded should reinitialize rg_device correctly
for every case except rpcrdma_wc_receive, which still uses
rpcrdma_rep::rr_device.
Ensure the same device that was used to map a Receive buffer is also
used to sync it in rpcrdma_wc_receive by using rg_device there
instead of rr_device.
This is the only use of rr_device, so it can be removed.
The use of regbufs in the send path is also updated, for
completeness.
Fixes: 54cbd6b0c6 ("xprtrdma: Delay DMA mapping Send and ... ")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
In order to unload a device driver and reload it, xprtrdma will need
to close a transport's interface adapter, and then call
rpcrdma_ia_open again, possibly finding a different interface
adapter.
Make rpcrdma_ia_open safe to call on the same transport multiple
times.
This is a refactoring change only.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Current NFS clients rely on connection loss to determine when to
retransmit. In particular, for protocols like NFSv4, clients no
longer rely on RPC timeouts to drive retransmission: NFSv4 servers
are required to terminate a connection when they need a client to
retransmit pending RPCs.
When a server is no longer reachable, either because it has crashed
or because the network path has broken, the server cannot actively
terminate a connection. Thus NFS clients depend on transport-level
keepalive to determine when a connection must be replaced and
pending RPCs retransmitted.
However, RDMA RC connections do not have a native keepalive
mechanism. If an NFS/RDMA server crashes after a client has sent
RPCs successfully (an RC ACK has been received for all OTW RDMA
requests), there is no way for the client to know the connection is
moribund.
In addition, new RDMA requests are subject to the RPC-over-RDMA
credit limit. If the client has consumed all granted credits with
NFS traffic, it is not allowed to send another RDMA request until
the server replies. Thus it has no way to send a true keepalive when
the workload has already consumed all credits with pending RPCs.
To address this, forcibly disconnect a transport when an RPC times
out. This prevents moribund connections from stopping the
detection of failover or other configuration changes on the server.
Note that even if the connection is still good, retransmitting
any RPC will trigger a disconnect thanks to this logic in
xprt_rdma_send_request:
/* Must suppress retransmit to maintain credits */
if (req->rl_connect_cookie == xprt->connect_cookie)
goto drop_connection;
req->rl_connect_cookie = xprt->connect_cookie;
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Trying to create MRs while the transport is being torn down can
cause a crash.
Fixes: e2ac236c0b ("xprtrdma: Allocate MRs on demand")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
backchannel; fix. Also some minor refinements to the nfsd
version-setting interface that we'd like to get fixed before release.
-----BEGIN PGP SIGNATURE-----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=oi0+
-----END PGP SIGNATURE-----
Merge tag 'nfsd-4.11-1' of git://linux-nfs.org/~bfields/linux
Pull nfsd fixes from Bruce Fields:
"The restriction of NFSv4 to TCP went overboard and also broke the
backchannel; fix.
Also some minor refinements to the nfsd version-setting interface that
we'd like to get fixed before release"
* tag 'nfsd-4.11-1' of git://linux-nfs.org/~bfields/linux:
svcrdma: set XPT_CONG_CTRL flag for bc xprt
NFSD: fix nfsd_reset_versions for NFSv4.
NFSD: fix nfsd_minorversion(.., NFSD_AVAIL)
NFSD: further refinement of content of /proc/fs/nfsd/versions
nfsd: map the ENOKEY to nfserr_perm for avoiding warning
SUNRPC/backchanel: set XPT_CONG_CTRL flag for bc xprt
Same change as Kinglong Mee's fix for the TCP backchannel service.
Fixes: 5283b03ee5 ("nfs/nfsd/sunrpc: enforce transport...")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Stable Bugfixes:
- Fix decrementing nrequests in NFS v4.2 COPY to fix kernel warnings
- Prevent a double free in async nfs4_exchange_id()
- Squelch a kbuild sparse complaint for xprtrdma
Other Bugfixes:
- Fix a typo (NFS_ATTR_FATTR_GROUP_NAME) that causes a memory leak
- Fix a reference leak that causes kernel warnings
- Make nfs4_cb_sv_ops static to fix a sparse warning
- Respect a server's max size in CREATE_SESSION
- Handle errors from nfs4_pnfs_ds_connect
- Flexfiles layout shouldn't mark devices as unavailable
-----BEGIN PGP SIGNATURE-----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=JY3W
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-4.11-2' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client fixes from Anna Schumaker:
"We have a handful of stable fixes to fix kernel warnings and other
bugs that have been around for a while. We've also found a few other
reference counting bugs and memory leaks since the initial 4.11 pull.
Stable Bugfixes:
- Fix decrementing nrequests in NFS v4.2 COPY to fix kernel warnings
- Prevent a double free in async nfs4_exchange_id()
- Squelch a kbuild sparse complaint for xprtrdma
Other Bugfixes:
- Fix a typo (NFS_ATTR_FATTR_GROUP_NAME) that causes a memory leak
- Fix a reference leak that causes kernel warnings
- Make nfs4_cb_sv_ops static to fix a sparse warning
- Respect a server's max size in CREATE_SESSION
- Handle errors from nfs4_pnfs_ds_connect
- Flexfiles layout shouldn't mark devices as unavailable"
* tag 'nfs-for-4.11-2' of git://git.linux-nfs.org/projects/anna/linux-nfs:
pNFS/flexfiles: never nfs4_mark_deviceid_unavailable
pNFS: return status from nfs4_pnfs_ds_connect
NFSv4.1 respect server's max size in CREATE_SESSION
NFS prevent double free in async nfs4_exchange_id
nfs: make nfs4_cb_sv_ops static
xprtrdma: Squelch kbuild sparse complaint
NFS: fix the fault nrequests decreasing for nfs_inode COPY
NFSv4: fix a reference leak caused WARNING messages
nfs4: fix a typo of NFS_ATTR_FATTR_GROUP_NAME
New complaint from kbuild for 4.9.y:
net/sunrpc/xprtrdma/verbs.c:489:19: sparse: incompatible types in
comparison expression (different type sizes)
verbs.c:
489 max_sge = min(ia->ri_device->attrs.max_sge, RPCRDMA_MAX_SEND_SGES);
I can't reproduce this running sparse here. Likewise, "make W=1
net/sunrpc/xprtrdma/verbs.o" never indicated any issue.
A little poking suggests that because the range of its values is
small, gcc can make the actual width of RPCRDMA_MAX_SEND_SGES
smaller than the width of an unsigned integer.
Fixes: 16f906d66c ("xprtrdma: Reduce required number of send SGEs")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: stable@kernel.org
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Stable bugfixes:
- NFSv4: Fix memory and state leak in _nfs4_open_and_get_state
- xprtrdma: Fix Read chunk padding
- xprtrdma: Per-connection pad optimization
- xprtrdma: Disable pad optimization by default
- xprtrdma: Reduce required number of send SGEs
- nlm: Ensure callback code also checks that the files match
- pNFS/flexfiles: If the layout is invalid, it must be updated before retrying
- NFSv4: Fix reboot recovery in copy offload
- Revert "NFSv4.1: Handle NFS4ERR_BADSESSION/NFS4ERR_DEADSESSION replies to OP_SEQUENCE"
- NFSv4: fix getacl head length estimation
- NFSv4: fix getacl ERANGE for sum ACL buffer sizes
Features:
- Add and use dprintk_cont macros
- Various cleanups to NFS v4.x to reduce code duplication and complexity
- Remove unused cr_magic related code
- Improvements to sunrpc "read from buffer" code
- Clean up sunrpc timeout code and allow changing TCP timeout parameters
- Remove duplicate mw_list management code in xprtrdma
- Add generic functions for encoding and decoding xdr streams
Bugfixes:
- Clean up nfs_show_mountd_netid
- Make layoutreturn_ops static and use NULL instead of 0 to fix sparse warnings
- Properly handle -ERESTARTSYS in nfs_rename()
- Check if register_shrinker() failed during rpcauth_init()
- Properly clean up procfs/pipefs entries
- Various NFS over RDMA related fixes
- Silence unititialized variable warning in sunrpc
-----BEGIN PGP SIGNATURE-----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=01DU
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-4.11-1' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client updates from Anna Schumaker:
"Highlights include:
Stable bugfixes:
- NFSv4: Fix memory and state leak in _nfs4_open_and_get_state
- xprtrdma: Fix Read chunk padding
- xprtrdma: Per-connection pad optimization
- xprtrdma: Disable pad optimization by default
- xprtrdma: Reduce required number of send SGEs
- nlm: Ensure callback code also checks that the files match
- pNFS/flexfiles: If the layout is invalid, it must be updated before
retrying
- NFSv4: Fix reboot recovery in copy offload
- Revert "NFSv4.1: Handle NFS4ERR_BADSESSION/NFS4ERR_DEADSESSION
replies to OP_SEQUENCE"
- NFSv4: fix getacl head length estimation
- NFSv4: fix getacl ERANGE for sum ACL buffer sizes
Features:
- Add and use dprintk_cont macros
- Various cleanups to NFS v4.x to reduce code duplication and
complexity
- Remove unused cr_magic related code
- Improvements to sunrpc "read from buffer" code
- Clean up sunrpc timeout code and allow changing TCP timeout
parameters
- Remove duplicate mw_list management code in xprtrdma
- Add generic functions for encoding and decoding xdr streams
Bugfixes:
- Clean up nfs_show_mountd_netid
- Make layoutreturn_ops static and use NULL instead of 0 to fix
sparse warnings
- Properly handle -ERESTARTSYS in nfs_rename()
- Check if register_shrinker() failed during rpcauth_init()
- Properly clean up procfs/pipefs entries
- Various NFS over RDMA related fixes
- Silence unititialized variable warning in sunrpc"
* tag 'nfs-for-4.11-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (64 commits)
NFSv4: fix getacl ERANGE for some ACL buffer sizes
NFSv4: fix getacl head length estimation
Revert "NFSv4.1: Handle NFS4ERR_BADSESSION/NFS4ERR_DEADSESSION replies to OP_SEQUENCE"
NFSv4: Fix reboot recovery in copy offload
pNFS/flexfiles: If the layout is invalid, it must be updated before retrying
NFSv4: Clean up owner/group attribute decode
SUNRPC: Add a helper function xdr_stream_decode_string_dup()
NFSv4: Remove bogus "struct nfs_client" argument from decode_ace()
NFSv4: Fix the underestimation of delegation XDR space reservation
NFSv4: Replace callback string decode function with a generic
NFSv4: Replace the open coded decode_opaque_inline() with the new generic
NFSv4: Replace ad-hoc xdr encode/decode helpers with xdr_stream_* generics
SUNRPC: Add generic helpers for xdr_stream encode/decode
sunrpc: silence uninitialized variable warning
nlm: Ensure callback code also checks that the files match
sunrpc: Allow xprt->ops->timer method to sleep
xprtrdma: Refactor management of mw_list field
xprtrdma: Handle stale connection rejection
xprtrdma: Properly recover FRWRs with in-flight FASTREG WRs
xprtrdma: Shrink send SGEs array
...
bugfixes.
A couple changes could theoretically break working setups on upgrade. I
don't expect complaints in practice, but they seem worth calling out
just in case:
- NFS security labels are now off by default; a new
security_label export flag reenables it per export. But,
having them on by default is a disaster, as it generally only
makes sense if all your clients and servers have similar
enough selinux policies. Thanks to Jason Tibbitts for
pointing this out.
- NFSv4/UDP support is off. It was never really supported, and
the spec explicitly forbids it. We only ever left it on out
of laziness; thanks to Jeff Layton for finally fixing that.
-----BEGIN PGP SIGNATURE-----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=iLLz
-----END PGP SIGNATURE-----
Merge tag 'nfsd-4.11' of git://linux-nfs.org/~bfields/linux
Pull nfsd updates from Bruce Fields:
"The nfsd update this round is mainly a lot of miscellaneous cleanups
and bugfixes.
A couple changes could theoretically break working setups on upgrade.
I don't expect complaints in practice, but they seem worth calling out
just in case:
- NFS security labels are now off by default; a new security_label
export flag reenables it per export. But, having them on by default
is a disaster, as it generally only makes sense if all your clients
and servers have similar enough selinux policies. Thanks to Jason
Tibbitts for pointing this out.
- NFSv4/UDP support is off. It was never really supported, and the
spec explicitly forbids it. We only ever left it on out of
laziness; thanks to Jeff Layton for finally fixing that"
* tag 'nfsd-4.11' of git://linux-nfs.org/~bfields/linux: (34 commits)
nfsd: Fix display of the version string
nfsd: fix configuration of supported minor versions
sunrpc: don't register UDP port with rpcbind when version needs congestion control
nfs/nfsd/sunrpc: enforce transport requirements for NFSv4
sunrpc: flag transports as having congestion control
sunrpc: turn bitfield flags in svc_version into bools
nfsd: remove superfluous KERN_INFO
nfsd: special case truncates some more
nfsd: minor nfsd_setattr cleanup
NFSD: Reserve adequate space for LOCKT operation
NFSD: Get response size before operation for all RPCs
nfsd/callback: Drop a useless data copy when comparing sessionid
nfsd/callback: skip the callback tag
nfsd/callback: Cleanup callback cred on shutdown
nfsd/idmap: return nfserr_inval for 0-length names
SUNRPC/Cache: Always treat the invalid cache as unexpired
SUNRPC: Drop all entries from cache_detail when cache_purge()
svcrdma: Poll CQs in "workqueue" mode
svcrdma: Combine list fields in struct svc_rdma_op_ctxt
svcrdma: Remove unused sc_dto_q field
...
NFSv4 requires a transport protocol with congestion control in most
cases.
On an IP network, that means that NFSv4 over UDP should be forbidden.
The situation with RDMA is a bit more nuanced, but most RDMA transports
are suitable for this. For now, we assume that all RDMA transports are
suitable, but we may need to revise that at some point.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Pull networking updates from David Miller:
"Highlights:
1) Support TX_RING in AF_PACKET TPACKET_V3 mode, from Sowmini
Varadhan.
2) Simplify classifier state on sk_buff in order to shrink it a bit.
From Willem de Bruijn.
3) Introduce SIPHASH and it's usage for secure sequence numbers and
syncookies. From Jason A. Donenfeld.
4) Reduce CPU usage for ICMP replies we are going to limit or
suppress, from Jesper Dangaard Brouer.
5) Introduce Shared Memory Communications socket layer, from Ursula
Braun.
6) Add RACK loss detection and allow it to actually trigger fast
recovery instead of just assisting after other algorithms have
triggered it. From Yuchung Cheng.
7) Add xmit_more and BQL support to mvneta driver, from Simon Guinot.
8) skb_cow_data avoidance in esp4 and esp6, from Steffen Klassert.
9) Export MPLS packet stats via netlink, from Robert Shearman.
10) Significantly improve inet port bind conflict handling, especially
when an application is restarted and changes it's setting of
reuseport. From Josef Bacik.
11) Implement TX batching in vhost_net, from Jason Wang.
12) Extend the dummy device so that VF (virtual function) features,
such as configuration, can be more easily tested. From Phil
Sutter.
13) Avoid two atomic ops per page on x86 in bnx2x driver, from Eric
Dumazet.
14) Add new bpf MAP, implementing a longest prefix match trie. From
Daniel Mack.
15) Packet sample offloading support in mlxsw driver, from Yotam Gigi.
16) Add new aquantia driver, from David VomLehn.
17) Add bpf tracepoints, from Daniel Borkmann.
18) Add support for port mirroring to b53 and bcm_sf2 drivers, from
Florian Fainelli.
19) Remove custom busy polling in many drivers, it is done in the core
networking since 4.5 times. From Eric Dumazet.
20) Support XDP adjust_head in virtio_net, from John Fastabend.
21) Fix several major holes in neighbour entry confirmation, from
Julian Anastasov.
22) Add XDP support to bnxt_en driver, from Michael Chan.
23) VXLAN offloads for enic driver, from Govindarajulu Varadarajan.
24) Add IPVTAP driver (IP-VLAN based tap driver) from Sainath Grandhi.
25) Support GRO in IPSEC protocols, from Steffen Klassert"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1764 commits)
Revert "ath10k: Search SMBIOS for OEM board file extension"
net: socket: fix recvmmsg not returning error from sock_error
bnxt_en: use eth_hw_addr_random()
bpf: fix unlocking of jited image when module ronx not set
arch: add ARCH_HAS_SET_MEMORY config
net: napi_watchdog() can use napi_schedule_irqoff()
tcp: Revert "tcp: tcp_probe: use spin_lock_bh()"
net/hsr: use eth_hw_addr_random()
net: mvpp2: enable building on 64-bit platforms
net: mvpp2: switch to build_skb() in the RX path
net: mvpp2: simplify MVPP2_PRS_RI_* definitions
net: mvpp2: fix indentation of MVPP2_EXT_GLOBAL_CTRL_DEFAULT
net: mvpp2: remove unused register definitions
net: mvpp2: simplify mvpp2_bm_bufs_add()
net: mvpp2: drop useless fields in mvpp2_bm_pool and related code
net: mvpp2: remove unused 'tx_skb' field of 'struct mvpp2_tx_queue'
net: mvpp2: release reference to txq_cpu[] entry after unmapping
net: mvpp2: handle too large value in mvpp2_rx_time_coal_set()
net: mvpp2: handle too large value handling in mvpp2_rx_pkts_coal_set()
net: mvpp2: remove useless arguments in mvpp2_rx_{pkts, time}_coal_set
...
Pull locking updates from Ingo Molnar:
"The main changes in this cycle were:
- Implement wraparound-safe refcount_t and kref_t types based on
generic atomic primitives (Peter Zijlstra)
- Improve and fix the ww_mutex code (Nicolai Hähnle)
- Add self-tests to the ww_mutex code (Chris Wilson)
- Optimize percpu-rwsems with the 'rcuwait' mechanism (Davidlohr
Bueso)
- Micro-optimize the current-task logic all around the core kernel
(Davidlohr Bueso)
- Tidy up after recent optimizations: remove stale code and APIs,
clean up the code (Waiman Long)
- ... plus misc fixes, updates and cleanups"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (50 commits)
fork: Fix task_struct alignment
locking/spinlock/debug: Remove spinlock lockup detection code
lockdep: Fix incorrect condition to print bug msgs for MAX_LOCKDEP_CHAIN_HLOCKS
lkdtm: Convert to refcount_t testing
kref: Implement 'struct kref' using refcount_t
refcount_t: Introduce a special purpose refcount type
sched/wake_q: Clarify queue reinit comment
sched/wait, rcuwait: Fix typo in comment
locking/mutex: Fix lockdep_assert_held() fail
locking/rtmutex: Flip unlikely() branch to likely() in __rt_mutex_slowlock()
locking/rwsem: Reinit wake_q after use
locking/rwsem: Remove unnecessary atomic_long_t casts
jump_labels: Move header guard #endif down where it belongs
locking/atomic, kref: Implement kref_put_lock()
locking/ww_mutex: Turn off __must_check for now
locking/atomic, kref: Avoid more abuse
locking/atomic, kref: Use kref_get_unless_zero() more
locking/atomic, kref: Kill kref_sub()
locking/atomic, kref: Add kref_read()
locking/atomic, kref: Add KREF_INIT()
...
A server rejects a connection attempt with STALE_CONNECTION when a
client attempts to connect to a working remote service, but uses a
QPN and GUID that corresponds to an old connection that was
abandoned. This might occur after a client crashes and restarts.
Fix rpcrdma_conn_upcall() to distinguish between a normal rejection
and rejection of stale connection parameters.
As an additional clean-up, remove the code that retries the
connection attempt with different ORD/IRD values. Code audit of
other ULP initiators shows no similar special case handling of
initiator_depth or responder_resources.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Sriharsha (sriharsha.basavapatna@broadcom.com) reports an occasional
double DMA unmap of an FRWR MR when a connection is lost. I see one
way this can happen.
When a request requires more than one segment or chunk,
rpcrdma_marshal_req loops, invoking ->frwr_op_map for each segment
(MR) in each chunk. Each call posts a FASTREG Work Request to
register one MR.
Now suppose that the transport connection is lost part-way through
marshaling this request. As part of recovering and resetting that
req, rpcrdma_marshal_req invokes ->frwr_op_unmap_safe, which hands
all the req's registered FRWRs to the MR recovery thread.
But note: FRWR registration is asynchronous. So it's possible that
some of these "already registered" FRWRs are fully registered, and
some are still waiting for their FASTREG WR to complete.
When the connection is lost, the "already registered" frmrs are
marked FRMR_IS_VALID, and the "still waiting" WRs flush. Then
frwr_wc_fastreg marks these frmrs FRMR_FLUSHED_FR.
But thanks to ->frwr_op_unmap_safe, the MR recovery thread is doing
an unreg / alloc_mr, a DMA unmap, and marking each of these frwrs
FRMR_IS_INVALID, at the same time frwr_wc_fastreg might be running.
- If the recovery thread runs last, then the frmr is marked
FRMR_IS_INVALID, and life continues.
- If frwr_wc_fastreg runs last, the frmr is marked FRMR_FLUSHED_FR,
but the recovery thread has already DMA unmapped that MR. When
->frwr_op_map later re-uses this frmr, it sees it is not marked
FRMR_IS_INVALID, and tries to recover it before using it, resulting
in a second DMA unmap of the same MR.
The fix is to guarantee in-flight FASTREG WRs have flushed before MR
recovery runs on those FRWRs. Thus we depend on ro_unmap_safe
(called from xprt_rdma_send_request on retransmit, or from
xprt_rdma_free) to clean up old registrations as needed.
Reported-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
We no longer need to accommodate an xdr_buf whose pages start at an
offset and cross extra page boundaries. If there are more partial or
whole pages to send than there are available SGEs, the marshaling
logic is now smart enough to use a Read chunk instead of failing.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
The MAX_SEND_SGES check introduced in commit 655fec6987
("xprtrdma: Use gathered Send for large inline messages") fails
for devices that have a small max_sge.
Instead of checking for a large fixed maximum number of SGEs,
check for a minimum small number. RPC-over-RDMA will switch to
using a Read chunk if an xdr_buf has more pages than can fit in
the device's max_sge limit. This is considerably better than
failing all together to mount the server.
This fix supports devices that have as few as three send SGEs
available.
Reported-by: Selvin Xavier <selvin.xavier@broadcom.com>
Reported-by: Devesh Sharma <devesh.sharma@broadcom.com>
Reported-by: Honggang Li <honli@redhat.com>
Reported-by: Ram Amrani <Ram.Amrani@cavium.com>
Fixes: 655fec6987 ("xprtrdma: Use gathered Send for large ...")
Cc: stable@vger.kernel.org # v4.9+
Tested-by: Honggang Li <honli@redhat.com>
Tested-by: Ram Amrani <Ram.Amrani@cavium.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Commit d5440e27d3 ("xprtrdma: Enable pad optimization") made the
Linux client omit XDR round-up padding in normal Read and Write
chunks so that the client doesn't have to register and invalidate
3-byte memory regions that contain no real data.
Unfortunately, my cheery 2014 assessment that this optimization "is
supported now by both Linux and Solaris servers" was premature.
We've found bugs in Solaris in this area since commit d5440e27d3
("xprtrdma: Enable pad optimization") was merged (SYMLINK is the
main offender).
So for maximum interoperability, I'm disabling this optimization
again. If a CM private message is exchanged when connecting, the
client recognizes that the server is Linux, and enables the
optimization for that connection.
Until now the Solaris server bugs did not impact common operations,
and were thus largely benign. Soon, less capable devices on Linux
NFS/RDMA clients will make use of Read chunks more often, and these
Solaris bugs will prevent interoperation in more cases.
Fixes: 677eb17e94 ("xprtrdma: Fix XDR tail buffer marshalling")
Cc: stable@vger.kernel.org # v4.9+
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Pad optimization is changed by echoing into
/proc/sys/sunrpc/rdma_pad_optimize. This is a global setting,
affecting all RPC-over-RDMA connections to all servers.
The marshaling code picks up that value and uses it for decisions
about how to construct each RPC-over-RDMA frame. Having it change
suddenly in mid-operation can result in unexpected failures. And
some servers a client mounts might need chunk round-up, while
others don't.
So instead, copy the pad_optimize setting into each connection's
rpcrdma_ia when the transport is created, and use the copy, which
can't change during the life of the connection, instead.
This also removes a hack: rpcrdma_convert_iovs was using
the remote-invalidation-expected flag to predict when it could leave
out Write chunk padding. This is because the Linux server handles
implicit XDR padding on Write chunks correctly, and only Linux
servers can set the connection's remote-invalidation-expected flag.
It's more sensible to use the pad optimization setting instead.
Fixes: 677eb17e94 ("xprtrdma: Fix XDR tail buffer marshalling")
Cc: stable@vger.kernel.org # v4.9+
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
When pad optimization is disabled, rpcrdma_convert_iovs still
does not add explicit XDR round-up padding to a Read chunk.
Commit 677eb17e94 ("xprtrdma: Fix XDR tail buffer marshalling")
incorrectly short-circuited the test for whether round-up padding
is needed that appears later in rpcrdma_convert_iovs.
However, if this is indeed a regular Read chunk (and not a
Position-Zero Read chunk), the tail iovec _always_ contains the
chunk's padding, and never anything else.
So, it's easy to just skip the tail when padding optimization is
enabled, and add the tail in a subsequent Read chunk segment, if
disabled.
Fixes: 677eb17e94 ("xprtrdma: Fix XDR tail buffer marshalling")
Cc: stable@vger.kernel.org # v4.9+
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Removing linux/phy.h from net/dsa.h reveals a build error in the sunrpc
code:
net/sunrpc/xprtrdma/svc_rdma_backchannel.c: In function 'xprt_rdma_bc_put':
net/sunrpc/xprtrdma/svc_rdma_backchannel.c:277:2: error: implicit declaration of function 'module_put' [-Werror=implicit-function-declaration]
net/sunrpc/xprtrdma/svc_rdma_backchannel.c: In function 'xprt_setup_rdma_bc':
net/sunrpc/xprtrdma/svc_rdma_backchannel.c:348:7: error: implicit declaration of function 'try_module_get' [-Werror=implicit-function-declaration]
Fix this by adding linux/module.h to svc_rdma_backchannel.c
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
svcrdma calls svc_xprt_put() in its completion handlers, which
currently run in IRQ context.
However, svc_xprt_put() is meant to be invoked in process context,
not in IRQ context. After the last transport reference is gone, it
directly calls a transport release function that expects to run in
process context.
Change the CQ polling modes to IB_POLL_WORKQUEUE so that svcrdma
invokes svc_xprt_put() only in process context. As an added benefit,
bottom half-disabled spin locking can be eliminated from I/O paths.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Clean up: The free list and the dto_q list fields are never used at
the same time. Reduce the size of struct svc_rdma_op_ctxt by
combining these fields.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
