For TCP we disable Nagle and I cannot think of why it would be needed
for SCTP. When disabled it seems to improve dlm_lock operations like it
does for TCP.
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: David Teigland <teigland@redhat.com>
Currently if a SCTP send fails, we lose the data we were trying
to send because the writequeue_entry is released when we do the send.
When this happens other nodes will then hang waiting for a reply.
This adds support for SCTP to retry the send operation.
I also removed the retry limit for SCTP use, because we want
to make sure we try every path during init time and for longer
failures we want to continually retry in case paths come back up
while trying other paths. We will do this until userspace tells us
to stop.
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: David Teigland <teigland@redhat.com>
Currently, if we cannot create a association to the first IP addr
that is added to DLM, the SCTP init assoc code will just retry
the same IP. This patch adds a simple failover schemes where we
will try one of the addresses that was passed into DLM.
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: David Teigland <teigland@redhat.com>
We should be testing and cleaing the init pending bit because later
when sctp_init_assoc is recalled it will be checking that it is not set
and set the bit.
We do not want to touch CF_CONNECT_PENDING here because we will queue
swork and process_send_sockets will then call the connect_action function.
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: David Teigland <teigland@redhat.com>
sctp_assoc was not getting set so later lookups failed.
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: David Teigland <teigland@redhat.com>
We were clearing the base con's init pending flags, but the
con for the node was the one with the pending bit set.
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch introduces an UAPI header for the SCTP protocol,
so that we can facilitate the maintenance and development of
user land applications or libraries, in particular in terms
of header synchronization.
To not break compatibility, some fragments from lksctp-tools'
netinet/sctp.h have been carefully included, while taking care
that neither kernel nor user land breaks, so both compile fine
with this change (for lksctp-tools I tested with the old
netinet/sctp.h header and with a newly adapted one that includes
the uapi sctp header). lksctp-tools smoke test run through
successfully as well in both cases.
Suggested-by: Neil Horman <nhorman@tuxdriver.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
I'm not sure why, but the hlist for each entry iterators were conceived
list_for_each_entry(pos, head, member)
The hlist ones were greedy and wanted an extra parameter:
hlist_for_each_entry(tpos, pos, head, member)
Why did they need an extra pos parameter? I'm not quite sure. Not only
they don't really need it, it also prevents the iterator from looking
exactly like the list iterator, which is unfortunate.
Besides the semantic patch, there was some manual work required:
- Fix up the actual hlist iterators in linux/list.h
- Fix up the declaration of other iterators based on the hlist ones.
- A very small amount of places were using the 'node' parameter, this
was modified to use 'obj->member' instead.
- Coccinelle didn't handle the hlist_for_each_entry_safe iterator
properly, so those had to be fixed up manually.
The semantic patch which is mostly the work of Peter Senna Tschudin is here:
@@
iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host;
type T;
expression a,c,d,e;
identifier b;
statement S;
@@
-T b;
<+... when != b
(
hlist_for_each_entry(a,
- b,
c, d) S
|
hlist_for_each_entry_continue(a,
- b,
c) S
|
hlist_for_each_entry_from(a,
- b,
c) S
|
hlist_for_each_entry_rcu(a,
- b,
c, d) S
|
hlist_for_each_entry_rcu_bh(a,
- b,
c, d) S
|
hlist_for_each_entry_continue_rcu_bh(a,
- b,
c) S
|
for_each_busy_worker(a, c,
- b,
d) S
|
ax25_uid_for_each(a,
- b,
c) S
|
ax25_for_each(a,
- b,
c) S
|
inet_bind_bucket_for_each(a,
- b,
c) S
|
sctp_for_each_hentry(a,
- b,
c) S
|
sk_for_each(a,
- b,
c) S
|
sk_for_each_rcu(a,
- b,
c) S
|
sk_for_each_from
-(a, b)
+(a)
S
+ sk_for_each_from(a) S
|
sk_for_each_safe(a,
- b,
c, d) S
|
sk_for_each_bound(a,
- b,
c) S
|
hlist_for_each_entry_safe(a,
- b,
c, d, e) S
|
hlist_for_each_entry_continue_rcu(a,
- b,
c) S
|
nr_neigh_for_each(a,
- b,
c) S
|
nr_neigh_for_each_safe(a,
- b,
c, d) S
|
nr_node_for_each(a,
- b,
c) S
|
nr_node_for_each_safe(a,
- b,
c, d) S
|
- for_each_gfn_sp(a, c, d, b) S
+ for_each_gfn_sp(a, c, d) S
|
- for_each_gfn_indirect_valid_sp(a, c, d, b) S
+ for_each_gfn_indirect_valid_sp(a, c, d) S
|
for_each_host(a,
- b,
c) S
|
for_each_host_safe(a,
- b,
c, d) S
|
for_each_mesh_entry(a,
- b,
c, d) S
)
...+>
[akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c]
[akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c]
[akpm@linux-foundation.org: checkpatch fixes]
[akpm@linux-foundation.org: fix warnings]
[akpm@linux-foudnation.org: redo intrusive kvm changes]
Tested-by: Peter Senna Tschudin <peter.senna@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The variable users is initialized but never used
otherwise, so remove the unused variable.
dpatch engine is used to auto generate this patch.
(https://github.com/weiyj/dpatch)
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: David Teigland <teigland@redhat.com>
Since add_sock() always returns a success code - 0, its return
value type should be changed from integer to void.
Signed-off-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Once the tcp_create_listen_sock() is returned successfully, we
will invoke add_sock() immediately. In add_sock(), the 'con'
variable is assigned to 'sk_user_data', meanwhile, the 'sock' is
also set to 'con->sock'. So it's unnecessary to do the same thing
in tcp_create_listen_sock().
Signed-off-by: Xue Ying <ying.xue@windriver.com>
Signed-off-by: David Teigland <teigland@redhat.com>
A deadlock sometimes occurs between dlm_controld closing
a lowcomms connection through configfs and dlm_send looking
up the address for a new connection in configfs.
dlm_controld does a configfs rmdir which calls
dlm_lowcomms_close which waits for dlm_send to
cancel work on the workqueues.
The dlm_send workqueue thread has called
tcp_connect_to_sock which calls dlm_nodeid_to_addr
which does a configfs lookup and blocks on a lock
held by dlm_controld in the rmdir path.
The solution here is to save the node addresses within
the lowcomms code so that the lowcomms workqueue does
not need to step through configfs to get a node address.
dlm_controld:
wait_for_completion+0x1d/0x20
__cancel_work_timer+0x1b3/0x1e0
cancel_work_sync+0x10/0x20
dlm_lowcomms_close+0x4c/0xb0 [dlm]
drop_comm+0x22/0x60 [dlm]
client_drop_item+0x26/0x50 [configfs]
configfs_rmdir+0x180/0x230 [configfs]
vfs_rmdir+0xbd/0xf0
do_rmdir+0x103/0x120
sys_rmdir+0x16/0x20
dlm_send:
mutex_lock+0x2b/0x50
get_comm+0x34/0x140 [dlm]
dlm_nodeid_to_addr+0x18/0xd0 [dlm]
tcp_connect_to_sock+0xf4/0x2d0 [dlm]
process_send_sockets+0x1d2/0x260 [dlm]
worker_thread+0x170/0x2a0
Signed-off-by: David Teigland <teigland@redhat.com>
During lowcomms shutdown, a new connection could possibly
be created, and attempt to use a workqueue that's been
destroyed. Similarly, during startup, a new connection
could attempt to use a workqueue that's not been set up
yet. Add a global variable to indicate when new connections
are allowed.
Based on patch by: Christine Caulfield <ccaulfie@redhat.com>
Reported-by: dann frazier <dann.frazier@canonical.com>
Reviewed-by: dann frazier <dann.frazier@canonical.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This set includes one trivial fix, and one simple recovery
speed up. Directory recovery can use the standard hash table
to find resources rather than always searching the linear
recovery list.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=ByvY
-----END PGP SIGNATURE-----
Merge tag 'dlm-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm
Pull dlm updates for 3.4 from David Teigland:
"This set includes one trivial fix, and one simple recovery speed up.
Directory recovery can use the standard hash table to find resources
rather than always searching the linear recovery list."
* tag 'dlm-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm:
dlm: last element of dlm_local_addr[] never used
dlm: fix slow rsb search in dir recovery
The last element of dlm_local_addr[DLM_MAX_ADDR_COUNT]
was not used because the loop ended at COUNT - 1.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David Teigland <teigland@redhat.com>
avoids allocating a fd that a) propagates to every kernel thread and
usermodehelper b) is not properly released.
References: http://article.gmane.org/gmane.linux.network.drbd/22529
Signed-off-by: Benjamin Poirier <bpoirier@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
C assignment can handle struct in6_addr copying.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When the dlm fails to make a network connection to another
node, include the address of the node in the error message.
Signed-off-by: Masatake YAMATO <yamato@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
The recent commit to use cmwq for send and recv threads
dcce240ead introduced problems,
apparently due to multiple workqueue threads. Single threads
make the problems go away, so return to that until we fully
understand the concurrency issues with multiple threads.
Signed-off-by: David Teigland <teigland@redhat.com>
The create_workqueue() returns NULL if failed rather than ERR_PTR().
Fix error checking and remove unnecessary variable 'error'.
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: David Teigland <teigland@redhat.com>
Calling cond_resched() after every send can unnecessarily
degrade performance. Go back to an old method of scheduling
after 25 messages.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
So far as I can tell, there is no reason to use a single-threaded
send workqueue for dlm, since it may need to send to several sockets
concurrently. Both workqueues are set to WQ_MEM_RECLAIM to avoid
any possible deadlocks, WQ_HIGHPRI since locking traffic is highly
latency sensitive (and to avoid a priority inversion wrt GFS2's
glock_workqueue) and WQ_FREEZABLE just in case someone needs to do
that (even though with current cluster infrastructure, it doesn't
make sense as the node will most likely land up ejected from the
cluster) in the future.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: David Teigland <teigland@redhat.com>
In the normal regime where an application uses non-blocking I/O
writes on a socket, they will handle -EAGAIN and use poll() to
wait for send space.
They don't actually sleep on the socket I/O write.
But kernel level RPC layers that do socket I/O operations directly
and key off of -EAGAIN on the write() to "try again later" don't
use poll(), they instead have their own sleeping mechanism and
rely upon ->sk_write_space() to trigger the wakeup.
So they do effectively sleep on the write(), but this mechanism
alone does not let the socket layers know what's going on.
Therefore they must emulate what would have happened, otherwise
TCP cannot possibly see that the connection is application window
size limited.
Handle this, therefore, like SUNRPC by setting SOCK_NOSPACE and
bumping the ->sk_write_count as needed when we hit the send buffer
limits.
This should make TCP send buffer size auto-tuning and the
->sk_write_space() callback invocations actually happen.
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: David Teigland <teigland@redhat.com>
hlist_for_each_entry binds its first argument to a non-null value, and thus
any null test on the value of that argument is superfluous.
The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
iterator I;
expression x,E,E1,E2;
statement S,S1,S2;
@@
I(x,...) { <...
- (x != NULL) &&
E
...> }
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: David Teigland <teigland@redhat.com>
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.
percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.
http://userweb.kernel.org/~tj/misc/slabh-sweep.py
The script does the followings.
* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.
* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.
* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.
The conversion was done in the following steps.
1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.
2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.
3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.
4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.
5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.
6. percpu.h was updated not to include slab.h.
7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).
* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig
8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.
Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
Replace all GFP_KERNEL and ls_allocation with GFP_NOFS.
ls_allocation would be GFP_KERNEL for userland lockspaces
and GFP_NOFS for file system lockspaces.
It was discovered that any lockspaces on the system can
affect all others by triggering memory reclaim in the
file system which could in turn call back into the dlm
to acquire locks, deadlocking dlm threads that were
shared by all lockspaces, like dlm_recv.
Signed-off-by: David Teigland <teigland@redhat.com>
The code to set up sctp sockets was not using the sockfd_lookup()
and sockfd_put() routines to translate an fd to a socket. The
direct fget and fput calls were resulting in error messages from
alloc_fd().
Also clean up two log messages and remove a third, related to
setting up sctp associations.
Signed-off-by: David Teigland <teigland@redhat.com>
The recently added dlm_lowcomms_connect_node() from
391fbdc5d5 does not work
when using SCTP instead of TCP. The sctp connection code
has nothing to do without data to send. Check for no data
in the sctp connection code and do nothing instead of
triggering a BUG. Also have connect_node() do nothing
when the protocol is sctp.
Signed-off-by: David Teigland <teigland@redhat.com>
Using kernel_sendpage() is cleaner and safer than following
sock->ops ourselves.
Signed-off-by: Paolo Bonzini <bonzini@gnu.org>
Signed-off-by: David Teigland <teigland@redhat.com>
Closing a connection to a node can create problems if there are
outstanding messages for that node. The problems include dlm_send
spinning attempting to reconnect, or BUG from tcp_connect_to_sock()
attempting to use a partially closed connection.
To cleanly close a connection, we now first attempt to send any pending
messages, cancel any remaining workqueue work, and flag the connection
as closed to avoid reconnect attempts.
Signed-off-by: Lars Marowsky-Bree <lmb@suse.de>
Signed-off-by: Christine Caulfield <ccaulfie@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
The last correction to the tcp_connect_to_sock error exit path,
commit a89d63a159, can free an already
freed socket, due to collision with a previous (incomplete) attempt
to fix the same issue, commit 311f6fc77c.
Signed-off-by: Casey Dahlin <cdahlin@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
In the tcp_connect_to_sock() error exit path, the socket
allocated at the top of the function was not being freed.
Signed-off-by: Casey Dahlin <cdahlin@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Change some GFP_KERNEL allocations to use either GFP_NOFS or
ls_allocation (when available) which the fs sets to GFP_NOFS.
The point is to prevent allocations from going back into the
cluster fs in places where that might lead to deadlock.
Signed-off-by: David Teigland <teigland@redhat.com>
Make network connections to other nodes earlier, in the context of
dlm_recoverd. This avoids connecting to nodes from dlm_send where we
try to avoid allocations which could possibly deadlock if memory reclaim
goes into the cluster fs which may try to do a dlm operation.
Signed-off-by: Christine Caulfield <ccaulfie@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Integer nodeids can be too large for the idr code; use a hash
table instead.
Signed-off-by: Christine Caulfield <ccaulfie@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
The pages used in lowcomms are not highmem, so kmap is not necessary.
Cc: Christine Caulfield <ccaulfie@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Use ls_allocation for memory allocations, which a cluster fs sets to
GFP_NOFS. Use GFP_NOFS for allocations when no lockspace struct is
available. Taking dlm locks needs to avoid calling back into the
cluster fs because write-out can require taking dlm locks.
Cc: Christine Caulfield <ccaulfie@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
It seems that `sock' allocated by sock_create_kern in
tcp_connect_to_sock() of dlm/fs/lowcomms.c is not released if
dlm_nodeid_to_addr an error.
Acked-by: Christine Caulfield <ccaulfie@redhat.com>
Signed-off-by: Masatake YAMATO <yamato@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
The semaphore connections_lock is used as a mutex. Convert it to the mutex
API.
Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net>
Cc: Christine Caulfield <ccaulfie@redhat.com>
Cc: David Teigland <teigland@redhat.com>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch addresses a problem introduced with the last round of
lowcomms patches where the 'othercon' connections do not get freed when
the DLM shuts down.
This results in the error message
"slab error in kmem_cache_destroy(): cache `dlm_conn': Can't free all
objects"
and the DLM cannot be restarted without a system reboot.
See bz#428119
Signed-off-by: Patrick Caulfield <pcaulfie@redhat.com>
Signed-off-by: Fabio M. Di Nitto <fabbione@ubuntu.com>
Signed-off-by: David Teigland <teigland@redhat.com>
A common problem occurs when multiple IP addresses within the same
subnet are assigned to the same NIC. If we make a connection attempt to
another address on the same subnet as one of those addresses, the
connection attempt will not necessarily be routed from the address we
want.
In the case of the DLM, the other nodes will quickly drop the connection
attempt, causing problems.
This patch makes the DLM bind to the local address it acquired from the
cluster manager when using TCP prior to making a connection, obviating
the need for administrators to "fix" their systems or use clever routing
tricks.
Signed-off-by: Lon Hohberger <lhh@redhat.com>
Signed-off-by: Patrick Caulfield <pcaulfie@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
