Check the mask for non-zero value before installing tc filters
for L4 source and destination ports. Otherwise installing a
filter for source port installs destination port too and
vice-versa.
Fixes: 1d4d9e42c2 ("octeontx2-pf: Add tc flower hardware offload on ingress traffic")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
NIX_AF_TLXX_PIR/CIR register format has changed from OcteonTx2
to CN10K. CN10K supports larger burst size. Fix burst exponent
and burst mantissa configuration for CN10K.
Also fixed 'maxrate' from u32 to u64 since 'police.rate_bytes_ps'
passed by stack is also u64.
Fixes: e638a83f16 ("octeontx2-pf: TC_MATCHALL egress ratelimiting offload")
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Subbaraya Sundeep says:
====================
Octeontx2 minor tc fixes
This patch set fixes two problems found in tc code
wrt to ratelimiting and when installing UDP/TCP filters.
Patch 1: CN10K has different register format compared to
CN9xx hence fixes that.
Patch 2: Check flow mask also before installing a src/dst
port filter, otherwise installing for one port installs for other one too.
====================
Link: https://lore.kernel.org/r/1658650874-16459-1-git-send-email-sbhatta@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Check the mask for non-zero value before installing tc filters
for L4 source and destination ports. Otherwise installing a
filter for source port installs destination port too and
vice-versa.
Fixes: 1d4d9e42c2 ("octeontx2-pf: Add tc flower hardware offload on ingress traffic")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
NIX_AF_TLXX_PIR/CIR register format has changed from OcteonTx2
to CN10K. CN10K supports larger burst size. Fix burst exponent
and burst mantissa configuration for CN10K.
Also fixed 'maxrate' from u32 to u64 since 'police.rate_bytes_ps'
passed by stack is also u64.
Fixes: e638a83f16 ("octeontx2-pf: TC_MATCHALL egress ratelimiting offload")
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The previous commit fixed a bug in the bpf_skb_set_tunnel_key helper to
avoid dropping packets whose outer source IP address isn't assigned to a
host interface. This commit changes the corresponding selftest to not
assign the outer source IP address to an interface.
Not assigning the source IP to an interface causes two issues in the
existing test:
1. The ARP requests will fail for that IP address so we need to add the
ARP entry manually.
2. The encapsulated ICMP echo reply traffic will not reach the VXLAN
device. It will be dropped by the stack before, because the
outer destination IP is unknown.
To solve 2., we have two choices. Either we perform decapsulation
ourselves in a BPF program attached at veth1 (the base device for the
VXLAN device), or we switch the outer destination address when we
receive the packet at veth1, such that the stack properly demultiplexes
it to the VXLAN device afterward.
This commit implements the second approach, where we switch the outer
destination address from the unassigned IP address to the assigned one,
only for VXLAN traffic ingressing veth1.
Then, at the vxlan device, the BPF program that checks the output of
bpf_skb_get_tunnel_key needs to be updated as the expected local IP
address is now the unassigned one.
Signed-off-by: Paul Chaignon <paul@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/4addde76eaf3477a58975bef15ed2788c44e5f55.1658759380.git.paul@isovalent.com
Commit 26101f5ab6 ("bpf: Add source ip in "struct bpf_tunnel_key"")
added support for getting and setting the outer source IP of encapsulated
packets via the bpf_skb_{get,set}_tunnel_key BPF helper. This change
allows BPF programs to set any IP address as the source, including for
example the IP address of a container running on the same host.
In that last case, however, the encapsulated packets are dropped when
looking up the route because the source IP address isn't assigned to any
interface on the host. To avoid this, we need to set the
FLOWI_FLAG_ANYSRC flag.
Fixes: 26101f5ab6 ("bpf: Add source ip in "struct bpf_tunnel_key"")
Signed-off-by: Paul Chaignon <paul@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/76873d384e21288abe5767551a0799ac93ec07fb.1658759380.git.paul@isovalent.com
Use the new ip_tunnel_key field with the flow flags in the IPv4 route
lookups for the encapsulated packet. This will be used by the
bpf_skb_set_tunnel_key helper in the subsequent commit.
Signed-off-by: Paul Chaignon <paul@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/fcc2e0eea01e8ea465a180126366ec20596ba530.1658759380.git.paul@isovalent.com
Use the new ip_tunnel_key field with the flow flags in the IPv4 route
lookups for the encapsulated packet. This will be used by the
bpf_skb_set_tunnel_key helper in a subsequent commit.
Signed-off-by: Paul Chaignon <paul@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/1ffc95c3d60182fd5ec0cf6602083f8f68afe98f.1658759380.git.paul@isovalent.com
This commit extends the ip_tunnel_key struct with a new field for the
flow flags, to pass them to the route lookups. This new field will be
populated and used in subsequent commits.
Signed-off-by: Paul Chaignon <paul@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/f8bfd4983bd06685a59b1e3ba76ca27496f51ef3.1658759380.git.paul@isovalent.com
DRV_VERSION is a leftover from when the driver was an out of tree
module. The driver version was never incremented despite of the
numerous changes made since it was mainstreamed. Keeping an
unmaintained driver version number makes no sense. Remove it and rely
on the kernel version instead.
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20220726082707.58758-11-mailhol.vincent@wanadoo.fr
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
ES58X_MODULE_NAME is set to "etas_es58x". KBUILD_MODNAME also
evaluates to "etas_es58x". Get rid of ES58X_MODULE_NAME and rely on
KBUILD_MODNAME instead.
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20220726082707.58758-10-mailhol.vincent@wanadoo.fr
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The driver uses the string "usb_8dev" to populate usb_driver::name and
can_bittiming_const::name. KBUILD_MODNAME also evaluates to
"ubs_8dev". Use KBUILD_MODNAME and get rid on the hardcoded string
names.
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20220726082707.58758-9-mailhol.vincent@wanadoo.fr
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The driver uses the string "kvaser_usb" to populate
usb_driver::name. KBUILD_MODNAME also evaluates to "kvaser_ubs". Use
KBUILD_MODNAME and get rid on the hardcoded string names.
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20220726082707.58758-8-mailhol.vincent@wanadoo.fr
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The driver uses the string "gs_usb" to populate usb_driver::name,
can_bittiming_const::name and
can_data_bittiming_const::name. KBUILD_MODNAME evaluates to
"gs_ubs". Use KBUILD_MODNAME and get rid on the hardcoded string
names.
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20220726082707.58758-7-mailhol.vincent@wanadoo.fr
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The driver uses the string "ems_usb" to populate
usb_driver::name. KBUILD_MODNAME also evaluates to "esd_ubs". Use
KBUILD_MODNAME and get rid on the hardcoded string names.
CC: Frank Jungclaus <frank.jungclaus@esd.eu>
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20220726082707.58758-6-mailhol.vincent@wanadoo.fr
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The driver uses the string "softing" to populate platform_driver::name
and can_bittiming_const::name. KBUILD_MODNAME also evaluates to
"softing". Use KBUILD_MODNAME and get rid on the hardcoded string
names.
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20220726082707.58758-5-mailhol.vincent@wanadoo.fr
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The driver uses the string "ems_usb" to populate usb_driver::name and
can_bittiming_const::name. KBUILD_MODNAME also evaluates to
"ems_ubs". Use KBUILD_MODNAME and get rid on the hardcoded string
names.
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20220726082707.58758-3-mailhol.vincent@wanadoo.fr
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The driver uses the string "can327" to populate
tty_ldisc_ops::name. KBUILD_MODNAME also evaluates to "can327". Use
KBUILD_MODNAME and get rid on the hardcoded string names.
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20220726082707.58758-2-mailhol.vincent@wanadoo.fr
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Christian Marangi says:
====================
Add MTU change with stmmac interface running
This series is to permit MTU change while the interface is running.
Major rework are needed to permit to allocate a new dma conf based on
the new MTU before applying it. This is to make sure there is enough
space to allocate all the DMA queue before releasing the stmmac driver.
This was tested with a simple way to stress the network while the
interface is running.
2 ssh connection to the device:
- One generating simple traffic with while true; do free; done
- The other making the mtu change with a delay of 1 second
The connection is correctly stopped and recovered after the MTU is changed.
The first 2 patch of this series are minor fixup that fix problems
presented while testing this. One fix a problem when we renable a queue
while we are generating a new dma conf. The other is a corner case that
was notice while stressing the driver and turning down the interface while
there was some traffic.
(this is a follow-up of a simpler patch that wanted to add the same
feature. It was suggested to first try to check if it was possible to
apply the new configuration. Posting as RFC as it does major rework for
the new concept of DMA conf)
====================
Link: https://lore.kernel.org/r/20220723142933.16030-1-ansuelsmth@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are sleep in atomic context bugs in timer handlers of sctp
such as sctp_generate_t3_rtx_event(), sctp_generate_probe_event(),
sctp_generate_t1_init_event(), sctp_generate_timeout_event(),
sctp_generate_t3_rtx_event() and so on.
The root cause is sctp_sched_prio_init_sid() with GFP_KERNEL parameter
that may sleep could be called by different timer handlers which is in
interrupt context.
One of the call paths that could trigger bug is shown below:
(interrupt context)
sctp_generate_probe_event
sctp_do_sm
sctp_side_effects
sctp_cmd_interpreter
sctp_outq_teardown
sctp_outq_init
sctp_sched_set_sched
n->init_sid(..,GFP_KERNEL)
sctp_sched_prio_init_sid //may sleep
This patch changes gfp_t parameter of init_sid in sctp_sched_set_sched()
from GFP_KERNEL to GFP_ATOMIC in order to prevent sleep in atomic
context bugs.
Fixes: 5bbbbe32a4 ("sctp: introduce stream scheduler foundations")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Link: https://lore.kernel.org/r/20220723015809.11553-1-duoming@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove the limitation where the interface needs to be down to change
MTU by releasing and opening the stmmac driver to set the new MTU.
Also call the set_filter function to correctly init the port.
This permits to remove the EBUSY error while the ethernet port is
running permitting a correct MTU change if for example a DSA request
a MTU change for a switch CPU port.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rework the driver to generate the stmmac dma_conf before stmmac_open.
This permits a function to first check if it's possible to allocate a
new dma_config and then pass it directly to __stmmac_open and "open" the
interface with the new configuration.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move dma buf conf to dedicated struct. This in preparation for code
rework that will permit to allocate separate dma_conf without affecting
the priv struct.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Disable all queues and disconnect before tx_disable in stmmac_release to
prevent a corner case where packet may be still queued at the same time
tx_disable is called resulting in kernel panic if some packet still has
to be processed.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move queue reset to dedicated functions. This aside from a simple
cleanup is also required to allocate a dma conf without resetting the tx
queue while the device is temporarily detached as now the reset is not
part of the dma init function and can be done later in the code flow.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
delete extra space and tab in blank line, there is no functional change.
Reported-by: Hacash Robot <hacashRobot@santino.com>
Signed-off-by: William Dean <williamsukatube@gmail.com>
Link: https://lore.kernel.org/r/20220723073222.2961602-1-williamsukatube@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Due to an invalid conflict resolution on my side while working on 2
different series (LAG FDBs and FDB isolation), dsa_switch_do_lag_fdb_add()
does not store the database associated with a dsa_mac_addr structure.
So after adding an FDB entry associated with a LAG, dsa_mac_addr_find()
fails to find it while deleting it, because &a->db is zeroized memory
for all stored FDB entries of lag->fdbs, and dsa_switch_do_lag_fdb_del()
returns -ENOENT rather than deleting the entry.
Fixes: c26933639b ("net: dsa: request drivers to perform FDB isolation")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20220723012411.1125066-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix the inability to bring an interface up on a setup with
only MSI interrupts enabled (no MSI-X).
Solution is to add a default number of QPs = 1. This is enough,
since without MSI-X support driver enables only a basic feature set.
Fixes: bc6d33c8d9 ("i40e: Fix the number of queues available to be mapped for use")
Signed-off-by: Dawid Lukwinski <dawid.lukwinski@intel.com>
Signed-off-by: Michal Maloszewski <michal.maloszewski@intel.com>
Tested-by: Dave Switzer <david.switzer@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20220722175401.112572-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Third set of patches for v5.20. MLO work continues and we have a lot
of stack changes due to that, including driver API changes. Not much
driver patches except on mt76.
Major changes:
cfg80211/mac80211
* more prepartion for Wi-Fi 7 Multi-Link Operation (MLO) support,
works with one link now
* align with IEEE Draft P802.11be_D2.0
* hardware timestamps for receive and transmit
mt76
* preparation for new chipset support
* ACPI SAR support
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmLe1k4RHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZvxlQf8DrZIllhF0q/7Wry3JuG0gbNA+V2eI/lc
OYrephsDBm/dvvyjcFWcdUzxoNk0k1+aOrx/09JijHFgCGKVwuK1+hxYVfjW2q43
9mHxJBo4NcMk1RDDM3paVuZ8QMHuYugbv2mQOZeAEq2XloAaqEM7wVE+bb4Mgtgx
VAKS5du2igrSt83wl8BRMFb9MPAM1EQ3Cw7Ro5T4y+1Qm/hrBm6qWizSpqh9CXYx
pDLR3pvQxiD4Axa0Uq3rUbyF4hLwciqSFOJvr2sI3q7b9YElA7wIi6NQzMkYJH6Z
7HW5K6UIQbblAaQkv2BLqpU1N6puTHUOAf5Md31vOAaOcGbSI5hbUA==
=Cnxg
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2022-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v5.20
Third set of patches for v5.20. MLO work continues and we have a lot
of stack changes due to that, including driver API changes. Not much
driver patches except on mt76.
Major changes:
cfg80211/mac80211
- more prepartion for Wi-Fi 7 Multi-Link Operation (MLO) support,
works with one link now
- align with IEEE Draft P802.11be_D2.0
- hardware timestamps for receive and transmit
mt76
- preparation for new chipset support
- ACPI SAR support
* tag 'wireless-next-2022-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (254 commits)
wifi: mac80211: fix link data leak
wifi: mac80211: mlme: fix disassoc with MLO
wifi: mac80211: add macros to loop over active links
wifi: mac80211: remove erroneous sband/link validation
wifi: mac80211: mlme: transmit assoc frame with address translation
wifi: mac80211: verify link addresses are different
wifi: mac80211: rx: track link in RX data
wifi: mac80211: optionally implement MLO multicast TX
wifi: mac80211: expand ieee80211_mgmt_tx() for MLO
wifi: nl80211: add MLO link ID to the NL80211_CMD_FRAME TX API
wifi: mac80211: report link ID to cfg80211 on mgmt RX
wifi: cfg80211: report link ID in NL80211_CMD_FRAME
wifi: mac80211: add hardware timestamps for RX and TX
wifi: cfg80211: add hardware timestamps to frame RX info
wifi: cfg80211/nl80211: move rx management data into a struct
wifi: cfg80211: add a function for reporting TX status with hardware timestamps
wifi: nl80211: add RX and TX timestamp attributes
wifi: ieee80211: add helper functions for detecting TM/FTM frames
wifi: mac80211_hwsim: handle links for wmediumd/virtio
wifi: mac80211: sta_info: fix link_sta insertion
...
====================
Link: https://lore.kernel.org/r/20220725174547.EA465C341C6@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
These properties are inherited from ethernet-controller.yaml.
This fixes the dt_binding_check warning:
imx8mm-tqma8mqml-mba8mx.dt.yaml: ethernet@30be0000: 'nvmem-cell-names',
'nvmem-cells' do not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220720063924.1412799-1-alexander.stein@ew.tq-group.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
40GbE Intel Wired LAN Driver Updates 2022-07-22
This series contains updates to i40e and iavf drivers.
Przemyslaw adds a helper function for determining whether TC MQPRIO is
enabled for i40e.
Avinash utilizes the driver's bookkeeping of filters to check for
duplicate filter before sending the request to the PF for iavf.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
A typical flow offload scenario for OpenWrt users is routed traffic
received by the wan interface that is redirected to a wlan device
belonging to the lan bridge. Current implementation fails to
fill wdma offload info in mtk_flow_get_wdma_info() since odev device is
the local bridge. Fix the issue running dev_fill_forward_path routine in
mtk_flow_get_wdma_info in order to identify the wlan device.
Tested-by: Paolo Valerio <pvalerio@redhat.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel says:
====================
mlxsw: Spectrum-2 PTP preparations
This patchset includes various preparations required for Spectrum-2 PTP
support.
Most of the changes are non-functional (e.g., renaming, adding
registers). The only intentional user visible change is in patch #10
where the PHC time is initialized to zero in accordance with the
recommendation of the PTP maintainer.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The function mlxsw_sp_ptp_phc_adjfreq() configures MTUTC register to adjust
hardware frequency by a given value.
This configuration will be same for Spectrum-2. In preparation for
Spectrum-2 PTP support, rename the function to not be Spectrum-1 specific.
Later, it will be used for Spectrum-2 also.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Spectrum-1 and Spectrum-2 differ in their time stamping capabilities.
The former can be configured to time stamp only a subset of received PTP
events (e.g., only Sync), whereas the latter will time stamp all PTP
events or none.
In preparation for Spectrum-2 PTP support, rename the function that
parses the hardware time stamping configuration upon %SIOCSHWTSTAMP to
be Spectrum-1 specific.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, there is one shared structure that holds the required
structures for PTP clock. Most of the existing fields are relevant only
for Spectrum-1 (cycles, timecounter, and more). Rename the structure to
be specific for Spectrum-1 and align the existing code. Add a common
structure which includes the structures which will be used also for
Spectrum-2. This structure will be returned from clock_init() operation,
as the definition is shared between all ASICs' operations.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, there is one shared structure that holds the required
structures and details for PTP. Most of the existing fields are relevant
only for Spectrum-1 (hash table, lock for hash table, delayed work, and
more). Rename the structure to be specific for Spectrum-1 and align the
existing code. Add a common structure which includes
'struct mlxsw_sp *mlxsw_sp' and will be returned from ptp_init()
operation, as the definition is shared between all ASICs' operations.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, the reading of FRC values (high and low) is done using macro
which calls to a function. In addition, to calculate the offset of FRC,
a simple macro is used. This code can be simplified by adding an helper
function and calculating the offset explicitly instead of using an
additional macro for that.
Add the helper function and convert the existing code. This helper will be
used later to read UTC clock.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As lately recommended in the mailing list[1], set the clock to zero time as
part of initialization.
The idea is that when the clock reads 'Jan 1, 1970', then it is clearly
wrong and user will not mistakenly think that the clock is set correctly.
If as part of initialization, the driver sets the clock, user might see
correct date and time (maybe with a small shift) and assume that there
is no need to sync the clock.
Fix the existing code of Spectrum-1 to set the 'timecounter' to zero.
[1]:
https://lore.kernel.org/netdev/20220201191041.GB7009@hoboy.vegasvil.org/
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rename the 'read_frc_capable' bit to 'read_clock_capable' since now it can
be both the FRC and UTC clocks.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a resource identifier for maximum number of FIDs so that it could be
later used to query the information from firmware.
In Spectrum-2 and Spectrum-3, the correction field of PTP packets which are
sent as control packets is not updated at egress port. To overcome this
limitation, some packets will be sent as data packets. The header should
include FID, which is supposed to be 'Max FID + port - 1'. As preparation,
add the required resource, to be able to query the value from firmware
later.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, the field FID in TX header is defined, but is not used as it is
relevant only for data packets. mlxsw driver currently sends all
host-generated traffic as control packets and not as data packets.
In Spectrum-2 and Spectrum-3, the correction field of PTP packets which
are sent as control packets is not updated at egress port. To overcome this
limitation while adding support for PTP, some packets will be sent as data
packets.
Fix the wrong shift in the definition, to allow using the field later.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The type of time stamp field in the CQE is configured via the
CONFIG_PROFILE command during driver initialization. Add the definition
of the relevant fields to the command's payload and set the type to UTC
for Spectrum-2 and above. This configuration can be done as part of the
preparations to PTP support, as the type of the time stamp will not break
any existing behavior.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add UTC sec and nsec PCI BAR and offset to query firmware command for a
future use.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The Completion Queue Element version 2 (CQEv2) includes various metadata
fields of packets.
Add 'time_stamp' and 'time_stamp_type' fields along with functions to
extract the seconds and nanoseconds for a future use.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Subbaraya Sundeep