Now that this isn't used anywhere, remove it.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Since only one service actually reports the rpc stats there's not much
of a reason to have a pointer to it in the svc_program struct. Adjust
the svc_create_pooled function to take the sv_stats as an argument and
pass the struct through there as desired instead of getting it from the
svc_program->pg_stats.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
A lot of places are setting a blank svc_stats in ->pg_stats and never
utilizing these stats. Remove all of these extra structs as we're not
reporting these stats anywhere.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The work of closing a file can have non-trivial cost. Doing it in a
separate work queue thread means that cost isn't imposed on the nfsd
threads and an imbalance can be created. This can result in files being
queued for the work queue more quickly that the work queue can process
them, resulting in unbounded growth of the queue and memory exhaustion.
To avoid this work imbalance that exhausts memory, this patch moves all
closing of files into the nfsd threads. This means that when the work
imposes a cost, that cost appears where it would be expected - in the
work of the nfsd thread. A subsequent patch will ensure the final
__fput() is called in the same (nfsd) thread which calls filp_close().
Files opened for NFSv3 are never explicitly closed by the client and are
kept open by the server in the "filecache", which responds to memory
pressure, is garbage collected even when there is no pressure, and
sometimes closes files when there is particular need such as for rename.
These files currently have filp_close() called in a dedicated work
queue, so their __fput() can have no effect on nfsd threads.
This patch discards the work queue and instead has each nfsd thread call
flip_close() on as many as 8 files from the filecache each time it acts
on a client request (or finds there are no pending client requests). If
there are more to be closed, more threads are woken. This spreads the
work of __fput() over multiple threads and imposes any cost on those
threads.
The number 8 is somewhat arbitrary. It needs to be greater than 1 to
ensure that files are closed more quickly than they can be added to the
cache. It needs to be small enough to limit the per-request delays that
will be imposed on clients when all threads are busy closing files.
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
As this function now destroys the svc_serv, this is a better name.
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
sv_refcnt is no longer useful.
lockd and nfs-cb only ever have the svc active when there are a non-zero
number of threads, so sv_refcnt mirrors sv_nrthreads.
nfsd also keeps the svc active between when a socket is added and when
the first thread is started, but we don't really need a refcount for
that. We can simply not destroy the svc while there are any permanent
sockets attached.
So remove sv_refcnt and the get/put functions.
Instead of a final call to svc_put(), call svc_destroy() instead.
This is changed to also store NULL in the passed-in pointer to make it
easier to avoid use-after-free situations.
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
A future patch will remove refcounting on svc_serv as it is of little
use.
It is currently used to keep the svc around while the pool_stats file is
open.
Change this to get the pointer, protected by the mutex, only in
seq_start, and the release the mutex in seq_stop.
This means that if the nfsd server is stopped and restarted while the
pool_stats file it open, then some pool stats info could be from the
first instance and some from the second. This might appear odd, but is
unlikely to be a problem in practice.
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The usage of read_seqbegin_or_lock() in nfsd_copy_write_verifier()
is wrong. "seq" is always even and thus "or_lock" has no effect,
this code can never take ->writeverf_lock for writing.
I guess this is fine, nfsd_copy_write_verifier() just copies 8 bytes
and nfsd_reset_write_verifier() is supposed to be very rare operation
so we do not need the adaptive locking in this case.
Yet the code looks wrong and sub-optimal, it can use read_seqbegin()
without changing the behaviour.
[ cel: Note also that it eliminates this Sparse warning:
fs/nfsd/nfssvc.c:360:6: warning: context imbalance in 'nfsd_copy_write_verifier' -
different lock contexts for basic block
]
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
This code is rarely (never?) enabled by distros, and it hasn't caught
anything in decades. Let's kill off this legacy debug code.
Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If write_ports_addfd or write_ports_addxprt fail, they call nfsd_put()
without calling nfsd_last_thread(). This leaves nn->nfsd_serv pointing
to a structure that has been freed.
So remove 'static' from nfsd_last_thread() and call it when the
nfsd_serv is about to be destroyed.
Fixes: ec52361df9 ("SUNRPC: stop using ->sv_nrthreads as a refcount")
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
nfsd_cache_csum() currently assumes that the server's RPC layer has
been advancing rq_arg.head[0].iov_base as it decodes an incoming
request, because that's the way it used to work. On entry, it
expects that buf->head[0].iov_base points to the start of the NFS
header, and excludes the already-decoded RPC header.
These days however, head[0].iov_base now points to the start of the
RPC header during all processing. It no longer points at the NFS
Call header when execution arrives at nfsd_cache_csum().
In a retransmitted RPC the XID and the NFS header are supposed to
be the same as the original message, but the contents of the
retransmitted RPC header can be different. For example, for krb5,
the GSS sequence number will be different between the two. Thus if
the RPC header is always included in the DRC checksum computation,
the checksum of the retransmitted message might not match the
checksum of the original message, even though the NFS part of these
messages is identical.
The result is that, even if a matching XID is found in the DRC,
the checksum mismatch causes the server to execute the
retransmitted RPC transaction again.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The "statp + 1" pointer that is passed to nfsd_cache_update() is
supposed to point to the start of the egress NFS Reply header. In
fact, it does point there for AUTH_SYS and RPCSEC_GSS_KRB5 requests.
But both krb5i and krb5p add fields between the RPC header's
accept_stat field and the start of the NFS Reply header. In those
cases, "statp + 1" points at the extra fields instead of the Reply.
The result is that nfsd_cache_update() caches what looks to the
client like garbage.
A connection break can occur for a number of reasons, but the most
common reason when using krb5i/p is a GSS sequence number window
underrun. When an underrun is detected, the server is obliged to
drop the RPC and the connection to force a retransmit with a fresh
GSS sequence number. The client presents the same XID, it hits in
the server's DRC, and the server returns the garbage cache entry.
The "statp + 1" argument has been used since the oldest changeset
in the kernel history repo, so it has been in nfsd_dispatch()
literally since before history began. The problem arose only when
the server-side GSS implementation was added twenty years ago.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Jeff Layton <jlayton@kernel.org
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The error paths in nfsd_svc() are needlessly complex and can result in a
final call to svc_put() without nfsd_last_thread() being called. This
results in the listening sockets not being closed properly.
The per-netns setup provided by nfsd_startup_new() and removed by
nfsd_shutdown_net() is needed precisely when there are running threads.
So we don't need nfsd_up_before. We don't need to know if it *was* up.
We only need to know if any threads are left. If none are, then we must
call nfsd_shutdown_net(). But we don't need to do that explicitly as
nfsd_last_thread() does that for us.
So simply call nfsd_last_thread() before the last svc_put() if there are
no running threads. That will always do the right thing.
Also discard:
pr_info("nfsd: last server has exited, flushing export cache\n");
It may not be true if an attempt to start the first server failed, and
it isn't particularly helpful and it simply reports normal behaviour.
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Introduce rpc_status netlink support for NFSD in order to dump pending
RPC requests debugging information from userspace.
Closes: https://bugzilla.linux-nfs.org/show_bug.cgi?id=366
Tested-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Using an atomic_t avoids the need to take a spinlock (which can soon be
removed).
Choosing a thread to kill needs to be careful as we cannot set the "die
now" bit atomically with the test on the count. Instead we temporarily
increase the count.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
svc threads are currently stopped using kthread_stop(). This requires
identifying a specific thread. However we don't care which thread
stops, just as long as one does.
So instead, set a flag in the svc_pool to say that a thread needs to
die, and have each thread check this flag instead of calling
kthread_should_stop(). The first thread to find and clear this flag
then moves towards exiting.
This removes an explicit dependency on sp_all_threads which will make a
future patch simpler.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
If /proc/fs/nfsd/pool_stats is open when the last nfsd thread exits, then
when the file is closed a NULL pointer is dereferenced.
This is because nfsd_pool_stats_release() assumes that the
pointer to the svc_serv cannot become NULL while a reference is held.
This used to be the case but a recent patch split nfsd_last_thread() out
from nfsd_put(), and clearing the pointer is done in nfsd_last_thread().
This is easily reproduced by running
rpc.nfsd 8 ; ( rpc.nfsd 0;true) < /proc/fs/nfsd/pool_stats
Fortunately nfsd_pool_stats_release() has easy access to the svc_serv
pointer, and so can call svc_put() on it directly.
Fixes: 9f28a971ee ("nfsd: separate nfsd_last_thread() from nfsd_put()")
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Most svc threads have no interest in a timeout.
nfsd sets it to 1 hour, but this is a wart of no significance.
lockd uses the timeout so that it can call nlmsvc_retry_blocked().
It also sometimes calls svc_wake_up() to ensure this is called.
So change lockd to be consistent and always use svc_wake_up() to trigger
nlmsvc_retry_blocked() - using a timer instead of a timeout to
svc_recv().
And change svc_recv() to not take a timeout arg.
This makes the sp_threads_timedout counter always zero.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
svc_recv() currently returns a 0 on success or one of two errors:
- -EAGAIN means no message was successfully received
- -EINTR means the thread has been told to stop
Previously nfsd would stop as the result of a signal as well as
following kthread_stop(). In that case the difference was useful: EINTR
means stop unconditionally. EAGAIN means stop if kthread_should_stop(),
continue otherwise.
Now threads only exit when kthread_should_stop() so we don't need the
distinction.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
All callers of svc_recv() go on to call svc_process() on success.
Simplify callers by having svc_recv() do that for them.
This loses one call to validate_process_creds() in nfsd. That was
debugging code added 14 years ago. I don't think we need to keep it.
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Now that the last nfsd thread is stopped by an explicit act of calling
svc_set_num_threads() with a count of zero, we only have a limited
number of places that can happen, and don't need to call
nfsd_last_thread() in nfsd_put()
So separate that out and call it at the two places where the number of
threads is set to zero.
Move the clearing of ->nfsd_serv and the call to svc_xprt_destroy_all()
into nfsd_last_thread(), as they are really part of the same action.
nfsd_put() is now a thin wrapper around svc_put(), so make it a static
inline.
nfsd_put() cannot be called after nfsd_last_thread(), so in a couple of
places we have to use svc_put() instead.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Previously a thread could exit asynchronously (due to a signal) so some
care was needed to hold nfsd_mutex over the last svc_put() call. Now a
thread can only exit when svc_set_num_threads() is called, and this is
always called under nfsd_mutex. So no care is needed.
Not only is the mutex held when a thread exits now, but the svc refcount
is elevated, so the svc_put() in svc_exit_thread() will never be a final
put, so the mutex isn't even needed at this point in the code.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The original implementation of nfsd used signals to stop threads during
shutdown.
In Linux 2.3.46pre5 nfsd gained the ability to shutdown threads
internally it if was asked to run "0" threads. After this user-space
transitioned to using "rpc.nfsd 0" to stop nfsd and sending signals to
threads was no longer an important part of the API.
In commit 3ebdbe5203 ("SUNRPC: discard svo_setup and rename
svc_set_num_threads_sync()") (v5.17-rc1~75^2~41) we finally removed the
use of signals for stopping threads, using kthread_stop() instead.
This patch makes the "obvious" next step and removes the ability to
signal nfsd threads - or any svc threads. nfsd stops allowing signals
and we don't check for their delivery any more.
This will allow for some simplification in later patches.
A change worth noting is in nfsd4_ssc_setup_dul(). There was previously
a signal_pending() check which would only succeed when the thread was
being shut down. It should really have tested kthread_should_stop() as
well. Now it just does the latter, not the former.
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The svc_ prefix is identified with the SunRPC layer. Although the
duplicate reply cache caches RPC replies, it is only for the NFS
protocol. Rename the struct to better reflect its purpose.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Over time I'd like to see NFS-specific fields moved out of struct
svc_rqst, which is an RPC layer object. These fields are layering
violations.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
I find the naming of nfsd_init_net() and nfsd_startup_net() to be
confusingly similar. Rename the namespace initialization and tear-
down ops and add comments to distinguish their separate purposes.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Currently, we're only memcpy'ing the first __be32. Ensure we copy into
both words.
Fixes: 91d2e9b56c ("NFSD: Clean up the nfsd_net::nfssvc_boot field")
Reported-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
There's no need to start the reply cache before nfsd is up and running,
and doing so means that we register a shrinker for every net namespace
instead of just the ones where nfsd is running.
Move it to the per-net nfsd startup instead.
Reported-by: Dai Ngo <dai.ngo@oracle.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Currently, svcauth_gss_accept() pre-reserves response buffer space
for the RPC payload length and GSS sequence number before returning
to the dispatcher, which then adds the header's accept_stat field.
The problem is the accept_stat field is supposed to go before the
length and seq_num fields. So svcauth_gss_release() has to relocate
the accept_stat value (see svcauth_gss_prepare_to_wrap()).
To enable these fields to be added to the response buffer in the
correct (final) order, the pointer to the accept_stat has to be made
available to svcauth_gss_accept() so that it can set it before
reserving space for the length and seq_num fields.
As a first step, move the pointer to the location of the accept_stat
field into struct svc_rqst.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Now that all vs_dispatch functions invoke svcxdr_init_encode(), it
is common code and can be pushed down into the generic RPC server.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Now that all vs_dispatch functions invoke svcxdr_init_decode(), it
is common code and can be pushed down into the generic RPC server.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Currently, we shut down the filecache before trying to clean up the
stateids that depend on it. This leads to the kernel trying to free an
nfsd_file twice, and a refcount overput on the nf_mark.
Change the shutdown procedure to tear down all of the stateids prior
to shutting down the filecache.
Reported-and-tested-by: Wang Yugui <wangyugui@e16-tech.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Fixes: 5e113224c1 ("nfsd: nfsd_file cache entries should be per net namespace")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Clean up: NFSv2 has the only two usages of rpc_drop_reply in the
NFSD code base. Since NFSv2 is going away at some point, replace
these in order to simplify the "drop this reply?" check in
nfsd_dispatch().
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
rpc.nfsd stopped supporting NFSv2 a year ago. Take the next logical
step toward deprecating it and allow NFSv2 support to be compiled out.
Add a new CONFIG_NFSD_V2 option that can be turned off and rework the
CONFIG_NFSD_V?_ACL option dependencies. Add a description that
discourages enabling it.
Also, change the description of CONFIG_NFSD to state that the always-on
version is now 3 instead of 2.
Finally, add an #ifdef around "case 2:" in __write_versions. When NFSv2
is disabled at compile time, this should make the kernel ignore attempts
to disable it at runtime, but still error out when trying to enable it.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Follow the advice of the below link and prefer 'strscpy' in this
subsystem. Conversion is 1:1 because the return value is not used.
Generated by a coccinelle script.
Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Eventually support for NFSv2 in the Linux NFS server is to be
deprecated and then removed.
However, NFSv2 is the "always supported" version that is available
as soon as CONFIG_NFSD is set. Before NFSv2 support can be removed,
we need to choose a different "always supported" version.
This patch removes CONFIG_NFSD_V3 so that NFSv3 is always supported,
as NFSv2 is today. When NFSv2 support is removed, NFSv3 will become
the only "always supported" NFS version.
The defconfigs still need to be updated to remove CONFIG_NFSD_V3=y.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Hoist svo_function back into svc_serv and remove struct
svc_serv_ops, since the struct is now devoid of fields.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
struct svc_serv_ops is about to be removed.
Neil Brown says:
> I suspect svo_module can go as well - I don't think the thread is
> ever the thing that primarily keeps a module active.
A random sample of kthread_create() callers shows sunrpc is the only
one that manages module reference count in this way.
Suggested-by: Neil Brown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Clean up: svc_shutdown_net() now does nothing but call
svc_close_net(). Replace all external call sites.
svc_close_net() is renamed to be the inverse of svc_xprt_create().
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Clean up. Neil observed that "any code that calls svc_shutdown_net()
knows what the shutdown function should be, and so can call it
directly."
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: NeilBrown <neilb@suse.de>
We have never been able to track down and address the underlying
cause of the performance issues with workqueue-based service
support. svo_enqueue_xprt is called multiple times per RPC, so
it adds instruction path length, but always ends up at the same
function: svc_xprt_do_enqueue(). We do not anticipate needing
this flexibility for dynamic nfsd thread management support.
As a micro-optimization, remove .svo_enqueue_xprt because
Spectre/Meltdown makes virtual function calls more costly.
This change essentially reverts commit b9e13cdfac ("nfsd/sunrpc:
turn enqueueing a svc_xprt into a svc_serv operation").
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Pull signal/exit/ptrace updates from Eric Biederman:
"This set of changes deletes some dead code, makes a lot of cleanups
which hopefully make the code easier to follow, and fixes bugs found
along the way.
The end-game which I have not yet reached yet is for fatal signals
that generate coredumps to be short-circuit deliverable from
complete_signal, for force_siginfo_to_task not to require changing
userspace configured signal delivery state, and for the ptrace stops
to always happen in locations where we can guarantee on all
architectures that the all of the registers are saved and available on
the stack.
Removal of profile_task_ext, profile_munmap, and profile_handoff_task
are the big successes for dead code removal this round.
A bunch of small bug fixes are included, as most of the issues
reported were small enough that they would not affect bisection so I
simply added the fixes and did not fold the fixes into the changes
they were fixing.
There was a bug that broke coredumps piped to systemd-coredump. I
dropped the change that caused that bug and replaced it entirely with
something much more restrained. Unfortunately that required some
rebasing.
Some successes after this set of changes: There are few enough calls
to do_exit to audit in a reasonable amount of time. The lifetime of
struct kthread now matches the lifetime of struct task, and the
pointer to struct kthread is no longer stored in set_child_tid. The
flag SIGNAL_GROUP_COREDUMP is removed. The field group_exit_task is
removed. Issues where task->exit_code was examined with
signal->group_exit_code should been examined were fixed.
There are several loosely related changes included because I am
cleaning up and if I don't include them they will probably get lost.
The original postings of these changes can be found at:
https://lkml.kernel.org/r/87a6ha4zsd.fsf@email.froward.int.ebiederm.orghttps://lkml.kernel.org/r/87bl1kunjj.fsf@email.froward.int.ebiederm.orghttps://lkml.kernel.org/r/87r19opkx1.fsf_-_@email.froward.int.ebiederm.org
I trimmed back the last set of changes to only the obviously correct
once. Simply because there was less time for review than I had hoped"
* 'signal-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (44 commits)
ptrace/m68k: Stop open coding ptrace_report_syscall
ptrace: Remove unused regs argument from ptrace_report_syscall
ptrace: Remove second setting of PT_SEIZED in ptrace_attach
taskstats: Cleanup the use of task->exit_code
exit: Use the correct exit_code in /proc/<pid>/stat
exit: Fix the exit_code for wait_task_zombie
exit: Coredumps reach do_group_exit
exit: Remove profile_handoff_task
exit: Remove profile_task_exit & profile_munmap
signal: clean up kernel-doc comments
signal: Remove the helper signal_group_exit
signal: Rename group_exit_task group_exec_task
coredump: Stop setting signal->group_exit_task
signal: Remove SIGNAL_GROUP_COREDUMP
signal: During coredumps set SIGNAL_GROUP_EXIT in zap_process
signal: Make coredump handling explicit in complete_signal
signal: Have prepare_signal detect coredumps using signal->core_state
signal: Have the oom killer detect coredumps using signal->core_state
exit: Move force_uaccess back into do_exit
exit: Guarantee make_task_dead leaks the tsk when calling do_task_exit
...
Clean up: These functions handle what the specs call a write
verifier, which in the Linux NFS server implementation is now
divorced from the server's boot instance
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
There are two boot-time fields in struct nfsd_net: one called
boot_time and one called nfssvc_boot. The latter is used only to
form write verifiers, but its documenting comment declares:
/* Time of server startup */
Since commit 27c438f53e ("nfsd: Support the server resetting the
boot verifier"), this field can be reset at any time; it's no
longer tied to server restart. So that comment is stale.
Also, according to pahole, struct timespec64 is 16 bytes long on
x86_64. The nfssvc_boot field is used only to form a write verifier,
which is 8 bytes long.
Let's clarify this situation by manufacturing an 8-byte verifier
in nfs_reset_boot_verifier() and storing only that in struct
nfsd_net.
We're grabbing 128 bits of time, so compress all of those into a
64-bit verifier instead of throwing out the high-order bits.
In the future, the siphash_key can be re-used for other hashed
objects per-nfsd_net.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
When vfs_iter_write() starts to fail because a file system is full,
a bunch of writes can fail at once with ENOSPC. These writes
repeatedly invoke nfsd_reset_boot_verifier() in quick succession.
Ensure that the time it grabs doesn't go backwards due to an ntp
adjustment going on at the same time.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
nfsd currently maintains an open-coded read/write semaphore (refcount
and wait queue) for each network namespace to ensure the nfs service
isn't shut down while the notifier is running.
This is excessive. As there is unlikely to be contention between
notifiers and they run without sleeping, a single spinlock is sufficient
to avoid problems.
Signed-off-by: NeilBrown <neilb@suse.de>
[ cel: ensure nfsd_notifier_lock is static ]
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The ->svo_setup callback serves no purpose. It is always called from
within the same module that chooses which callback is needed. So
discard it and call the relevant function directly.
Now that svc_set_num_threads() is no longer used remove it and rename
svc_set_num_threads_sync() to remove the "_sync" suffix.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
nfsd cannot currently use svc_set_num_threads_sync. It instead
uses svc_set_num_threads which does *not* wait for threads to all
exit, and has a separate mechanism (nfsd_shutdown_complete) to wait
for completion.
The reason that nfsd is unlike other services is that nfsd threads can
exit separately from svc_set_num_threads being called - they die on
receipt of SIGKILL. Also, when the last thread exits, the service must
be shut down (sockets closed).
For this, the nfsd_mutex needs to be taken, and as that mutex needs to
be held while svc_set_num_threads is called, the one cannot wait for
the other.
This patch changes the nfsd thread so that it can drop the ref on the
service without blocking on nfsd_mutex, so that svc_set_num_threads_sync
can be used:
- if it can drop a non-last reference, it does that. This does not
trigger shutdown and does not require a mutex. This will likely
happen for all but the last thread signalled, and for all threads
being shut down by nfsd_shutdown_threads()
- if it can get the mutex without blocking (trylock), it does that
and then drops the reference. This will likely happen for the
last thread killed by SIGKILL
- Otherwise there might be an unrelated task holding the mutex,
possibly in another network namespace, or nfsd_shutdown_threads()
might be just about to get a reference on the service, after which
we can drop ours safely.
We cannot conveniently get wakeup notifications on these events,
and we are unlikely to need to, so we sleep briefly and check again.
With this we can discard nfsd_shutdown_complete and
nfsd_complete_shutdown(), and switch to svc_set_num_threads_sync.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
