Commit Graph

107 Commits

Author SHA1 Message Date
Masahiro Yamada 9413e76405 kbuild: split the second line of *.mod into *.usyms
The *.mod files have two lines; the first line lists the member objects
of the module, and the second line, if CONFIG_TRIM_UNUSED_KSYMS=y, lists
the undefined symbols.

Currently, we generate *.mod after constructing composite modules,
otherwise, we cannot compute the second line. No prerequisite is
required to print the first line.

They are orthogonal. Splitting them into separate commands will ease
further cleanups.

This commit splits the list of undefined symbols out to *.usyms files.

Previously, the list of undefined symbols ended up with a very long
line, but now it has one symbol per line.

Use sed like we did before commit 7d32358be8 ("kbuild: avoid split
lines in .mod files").

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
2022-05-08 03:16:59 +09:00
Masahiro Yamada 40cb020305 .gitignore: ignore only top-level modules.builtin
modules.builtin used to be created in every directory.

Since commit 8b41fc4454 ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf"), modules.builtin is created only
in the top directory.

Add the '/' prefix so that it matches to only the modules.builtin located
in the top directory.

It has been more than one year since that change. I hope this will not
flood 'Untracked files' of 'git status'.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2021-05-02 00:43:35 +09:00
Masahiro Yamada 819cb9fc80 .gitignore: move tags and TAGS close to other tag files
For consistency, move tags and TAGS close to the cscope and GNU Global
patterns.

I removed the '/' prefix in case somebody wants to manually create tag
files in sub-directories.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2021-05-02 00:43:35 +09:00
Masahiro Yamada 69bc8d386a kbuild: generate Module.symvers only when vmlinux exists
The external module build shows the following warning if Module.symvers
is missing in the kernel tree.

  WARNING: Symbol version dump "Module.symvers" is missing.
           Modules may not have dependencies or modversions.

I think this is an important heads-up because the resulting modules may
not work as expected. This happens when you did not build the entire
kernel tree, for example, you might have prepared the minimal setups
for external modules by 'make defconfig && make modules_preapre'.

A problem is that 'make modules' creates Module.symvers even without
vmlinux. In this case, that warning is suppressed since Module.symvers
already exists in spite of its incomplete content.

The incomplete (i.e. invalid) Module.symvers should not be created.

This commit changes the second pass of modpost to dump symbols into
modules-only.symvers. The final Module.symvers is created by
concatenating vmlinux.symvers and modules-only.symvers if both exist.

Module.symvers is supposed to collect symbols from both vmlinux and
modules. It might be a bit confusing, and I am not quite sure if it
is an official interface, but presumably it is difficult to rename it
because some tools (e.g. kmod) parse it.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2021-04-25 05:17:02 +09:00
Rasmus Villemoes 5cc1247204 kbuild: add CONFIG_VMLINUX_MAP expert option
It can be quite useful to have ld emit a link map file, in order to
debug or verify that special sections end up where they are supposed
to, and to see what LD_DEAD_CODE_DATA_ELIMINATION manages to get rid
of.

The only reason I'm not just adding this unconditionally is that the
.map file can be rather large (several MB), and that's a waste of
space when one isn't interested in these things. Also make it depend
on CONFIG_EXPERT.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2021-04-25 05:12:26 +09:00
Linus Torvalds 79db4d2293 clang-lto series for v5.12-rc1
- Clang LTO build infrastructure and arm64-specific enablement (Sami Tolvanen)
 - Recursive build CC_FLAGS_LTO fix (Alexander Lobakin)
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEpcP2jyKd1g9yPm4TiXL039xtwCYFAmA0OEYACgkQiXL039xt
 wCYGJw/8CcyvQUGmXYEZVDLMahKz93RYijiGuSTVnhl0pNAyfOojaZ8Z//eD1VNA
 s82azW1XybbA6RnPGD7YQzYz27cSF2qUFDmplwVfE4mwBnPXzRxtVBDLSxksP1HS
 77sCOu91QhbovPCWET4dSHLJB3DVc78FiW4lVlRgrglyAz+dut1iXYar5e7VNoS0
 S4MwnqwteHC6YXP619rubhpdDoj7njuw1uxRIaodt9S/zRSpl5MCUgHmzQusgezs
 yWDdPHPWHnF7xxKgwSvE7AKZPdOnIxKxRi6Yd6vUIyrYB3qLZkFe75nUsgMroAhs
 /Bgrn69U2McMiJsOdh0ERzP2VNYfvMacBQ308nb45j83Bgv5l6uj8QOZU4ZogmXV
 PsDzsfUe9GsxgYexfozGX61rpd6JinzQKVyoDW3oTT54fbBxO3uDqT8kOBw72dPT
 9nkOxTzyb+UO0dpb/MhXLGkGcv8+lTA5ffVIKUx5UxKngRbukc3dxwVJgO4HmucK
 bwVQGD83D+/if5/JL9WtQRjDwFEn+IFmdv+3cAXkRo4IIS18LPZB1MJncTeWr8Z9
 HlkuDXlJOncUWCABGd1IKu1j0S2HpXV4qhqQXJ6PdfOvUPEaD9qgqEAjD5FxxyXF
 wpaV2MWya5i1FGwD5UKhi8hVnAFJyF0/w+enjiPwlmIbjdyEVXE=
 =6peY
 -----END PGP SIGNATURE-----

Merge tag 'clang-lto-v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux

Pull clang LTO updates from Kees Cook:
 "Clang Link Time Optimization.

  This is built on the work done preparing for LTO by arm64 folks,
  tracing folks, etc. This includes the core changes as well as the
  remaining pieces for arm64 (LTO has been the default build method on
  Android for about 3 years now, as it is the prerequisite for the
  Control Flow Integrity protections).

  While x86 LTO enablement is done, it depends on some pending objtool
  clean-ups. It's possible that I'll send a "part 2" pull request for
  LTO that includes x86 support.

  For merge log posterity, and as detailed in commit dc5723b02e
  ("kbuild: add support for Clang LTO"), here is the lt;dr to do an LTO
  build:

        make LLVM=1 LLVM_IAS=1 defconfig
        scripts/config -e LTO_CLANG_THIN
        make LLVM=1 LLVM_IAS=1

  (To do a cross-compile of arm64, add "CROSS_COMPILE=aarch64-linux-gnu-"
  and "ARCH=arm64" to the "make" command lines.)

  Summary:

   - Clang LTO build infrastructure and arm64-specific enablement (Sami
     Tolvanen)

   - Recursive build CC_FLAGS_LTO fix (Alexander Lobakin)"

* tag 'clang-lto-v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  kbuild: prevent CC_FLAGS_LTO self-bloating on recursive rebuilds
  arm64: allow LTO to be selected
  arm64: disable recordmcount with DYNAMIC_FTRACE_WITH_REGS
  arm64: vdso: disable LTO
  drivers/misc/lkdtm: disable LTO for rodata.o
  efi/libstub: disable LTO
  scripts/mod: disable LTO for empty.c
  modpost: lto: strip .lto from module names
  PCI: Fix PREL32 relocations for LTO
  init: lto: fix PREL32 relocations
  init: lto: ensure initcall ordering
  kbuild: lto: add a default list of used symbols
  kbuild: lto: merge module sections
  kbuild: lto: limit inlining
  kbuild: lto: fix module versioning
  kbuild: add support for Clang LTO
  tracing: move function tracer options to Kconfig
2021-02-23 09:28:51 -08:00
Viresh Kumar ce88c9c794 kbuild: Add support to build overlays (%.dtbo)
Add support for building DT overlays (%.dtbo). The overlay's source file
will have the usual extension, i.e. .dts, though the blob will have
.dtbo extension to distinguish it from normal blobs.

Acked-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/434ba2467dd0cd011565625aeb3450650afe0aae.1611904394.git.viresh.kumar@linaro.org
2021-02-04 09:00:04 -06:00
Sami Tolvanen 38e8918490 kbuild: lto: fix module versioning
With CONFIG_MODVERSIONS, version information is linked into each
compilation unit that exports symbols. With LTO, we cannot use this
method as all C code is compiled into LLVM bitcode instead. This
change collects symbol versions into .symversions files and merges
them in link-vmlinux.sh where they are all linked into vmlinux.o at
the same time.

Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20201211184633.3213045-4-samitolvanen@google.com
2021-01-14 08:21:08 -08:00
Mauro Carvalho Chehab f6236efced .gitignore: docs: ignore sphinx_*/ directories
The default way of building documentation is to use
Sphinx toolchain installed via pip, inside the
Kernel tree main directory. That's what's recommended by:

	scripts/sphinx-pre-install

As it usually provides a better version of this package
than the one installed, specially on LTS distros.

So, add the directories created by running the commands
suggested by the script.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/ac4e23d556c7d95cb11d6d5c605f43e425b2c3c7.1599660067.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-09-10 10:44:31 -06:00
Adam Borowski 6f3decabaf .gitignore: Add ZSTD-compressed files
For now, that's arch/x86/boot/compressed/vmlinux.bin.zst but probably more
will come, thus let's be consistent with all other compressors.

Signed-off-by: Adam Borowski <kilobyte@angband.pl>
Signed-off-by: Nick Terrell <terrelln@fb.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20200730190841.2071656-8-nickrterrell@gmail.com
2020-07-31 11:50:49 +02:00
Paul Menzel ba77dca584 .gitignore: Do not track `defconfig` from `make savedefconfig`
Running `make savedefconfig` creates by default `defconfig`, which is,
currently, on git’s radar, for example, `git status` lists this file as
untracked.

So, add the file to `.gitignore`, so it’s ignored by git.

Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-07-05 16:15:46 +09:00
Masahiro Yamada 269a535ca9 modpost: generate vmlinux.symvers and reuse it for the second modpost
The full build runs modpost twice, first for vmlinux.o and second for
modules.

The first pass dumps all the vmlinux symbols into Module.symvers, but
the second pass parses vmlinux again instead of reusing the dump file,
presumably because it needs to avoid accumulating stale symbols.

Loading symbol info from a dump file is faster than parsing an ELF object.
Besides, modpost deals with various issues to parse vmlinux in the second
pass.

A solution is to make the first pass dumps symbols into a separate file,
vmlinux.symvers. The second pass reads it, and parses module .o files.
The merged symbol information is dumped into Module.symvers in the same
way as before.

This makes further modpost cleanups possible.

Also, it fixes the problem of 'make vmlinux', which previously overwrote
Module.symvers, throwing away module symbols.

I slightly touched scripts/link-vmlinux.sh so that vmlinux is re-linked
when you cross this commit. Otherwise, vmlinux.symvers would not be
generated.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-06 23:38:12 +09:00
Masahiro Yamada d198b34f38 .gitignore: add SPDX License Identifier
Add SPDX License Identifier to all .gitignore files.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-25 11:50:48 +01:00
Christophe Leroy f3a60268f5 selftest/lkdtm: Use local .gitignore
Commit 68ca0fd272 ("selftest/lkdtm: Don't pollute 'git status'")
introduced patterns for git to ignore files generated in
tools/testing/selftests/lkdtm/

Use local .gitignore file instead of using the root one.

Fixes: 68ca0fd272 ("selftest/lkdtm: Don't pollute 'git status'")
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2020-03-02 08:39:39 -07:00
Christophe Leroy 68ca0fd272 selftest/lkdtm: Don't pollute 'git status'
Commit 46d1a0f03d ("selftests/lkdtm: Add tests for LKDTM targets")
added generation of lkdtm test scripts.

Ignore those generated scripts when performing 'git status'

Fixes: 46d1a0f03d ("selftests/lkdtm: Add tests for LKDTM targets")
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2020-02-20 08:55:06 -07:00
Masahiro Yamada bbc55bded4 modpost: dump missing namespaces into a single modules.nsdeps file
The modpost, with the -d option given, generates per-module .ns_deps
files.

Kbuild generates per-module .mod files to carry module information.
This is convenient because Make handles multiple jobs in parallel
when the -j option is given.

On the other hand, the modpost always runs as a single thread.
I do not see a strong reason to produce separate .ns_deps files.

This commit changes the modpost to generate just one file,
modules.nsdeps, each line of which has the following format:

  <module_name>: <list of missing namespaces>

Please note it contains *missing* namespaces instead of required ones.
So, modules.nsdeps is empty if the namespace dependency is all good.

This will work more efficiently because spatch will no longer process
already imported namespaces. I removed the '(if needed)' from the
nsdeps log since spatch is invoked only when needed.

This also solves the stale .ns_deps problem reported by Jessica Yu:

  https://lkml.org/lkml/2019/10/28/467

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Jessica Yu <jeyu@kernel.org>
Acked-by: Jessica Yu <jeyu@kernel.org>
Reviewed-by: Matthias Maennich <maennich@google.com>
Tested-by: Matthias Maennich <maennich@google.com>
2019-11-11 20:10:01 +09:00
Linus Torvalds e070355664 Modules updates for v5.4
Summary of modules changes for the 5.4 merge window:
 
 - Introduce exported symbol namespaces.
 
   This new feature allows subsystem maintainers to partition and
   categorize their exported symbols into explicit namespaces. Module
   authors are now required to import the namespaces they need.
 
   Some of the main motivations of this feature include: allowing kernel
   developers to better manage the export surface, allow subsystem
   maintainers to explicitly state that usage of some exported symbols
   should only be limited to certain users (think: inter-module or
   inter-driver symbols, debugging symbols, etc), as well as more easily
   limiting the availability of namespaced symbols to other parts of the
   kernel. With the module import requirement, it is also easier to spot
   the misuse of exported symbols during patch review. Two new macros are
   introduced: EXPORT_SYMBOL_NS() and EXPORT_SYMBOL_NS_GPL(). The API is
   thoroughly documented in Documentation/kbuild/namespaces.rst.
 
 - Some small code and kbuild cleanups here and there.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABCgAGBQJdh3n8AAoJEMBFfjjOO8Fy94kP+QHZF39QDvLbxAzEYAETAS+o
 CFu6wix/DrAwFkTU/kX1eAsAwDBEz0xkMciR4BsLX3sIafUVERxtDXVAui/dA1+6
 zfw2c3ObyVwPEk6aUPFprgkj+08gxujsJFlYTsQQUhtRbmxg6R7hD6t6ANxiHaY2
 AQe5TzOWXoIa2hHO+7rPMqf8l6qiFCaL0s3v5jrmBXa5mHmc4PVy95h1J6xQVw2u
 b+SlvKeylHv+OtCtvthkAJS3hfS35J/1TNb/RNYIvh60IfEguEuFsGuQ9JiSSAZS
 pv1cJ+I5d4v8Y/md1rZpdjTJL9gCrq/UUC67+UkejCOn0C+7XM2eR4Bu/jWvdMSn
 ZQDHcPhFSIfmP7FaKomPogaBbw1sI1FvM5930pPJzHnyO9+cefBXe7rWaaB+y0At
 GAxOtmk1dKh01BT7YO/C0oVuX87csWd74NHypVsbs0TgQo5jBFdZRheyDrq5YB+s
 tVK+5H0nqQrCcfo/TvhcsZlgITTGtgTPenaW99/i7qNa9mRUtxC/VkE+aob6HNRF
 1iBxxopOTxGN8akyKOVumtkuTQH3EJfouZee//pWbXLzyDmScg/k67vuao8kxbyq
 NA1piFAGJAHFsHATxrbvNOq6jZ5bfUT8pwSTs83JppuR++8Hxk7zaShS3/LvsvHt
 6ist/epOwTZ7oiNQ04nj
 =72Uy
 -----END PGP SIGNATURE-----

Merge tag 'modules-for-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux

Pull modules updates from Jessica Yu:
 "The main bulk of this pull request introduces a new exported symbol
  namespaces feature. The number of exported symbols is increasingly
  growing with each release (we're at about 31k exports as of 5.3-rc7)
  and we currently have no way of visualizing how these symbols are
  "clustered" or making sense of this huge export surface.

  Namespacing exported symbols allows kernel developers to more
  explicitly partition and categorize exported symbols, as well as more
  easily limiting the availability of namespaced symbols to other parts
  of the kernel. For starters, we have introduced the USB_STORAGE
  namespace to demonstrate the API's usage. I have briefly summarized
  the feature and its main motivations in the tag below.

  Summary:

   - Introduce exported symbol namespaces.

     This new feature allows subsystem maintainers to partition and
     categorize their exported symbols into explicit namespaces. Module
     authors are now required to import the namespaces they need.

     Some of the main motivations of this feature include: allowing
     kernel developers to better manage the export surface, allow
     subsystem maintainers to explicitly state that usage of some
     exported symbols should only be limited to certain users (think:
     inter-module or inter-driver symbols, debugging symbols, etc), as
     well as more easily limiting the availability of namespaced symbols
     to other parts of the kernel.

     With the module import requirement, it is also easier to spot the
     misuse of exported symbols during patch review.

     Two new macros are introduced: EXPORT_SYMBOL_NS() and
     EXPORT_SYMBOL_NS_GPL(). The API is thoroughly documented in
     Documentation/kbuild/namespaces.rst.

   - Some small code and kbuild cleanups here and there"

* tag 'modules-for-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
  module: Remove leftover '#undef' from export header
  module: remove unneeded casts in cmp_name()
  module: move CONFIG_UNUSED_SYMBOLS to the sub-menu of MODULES
  module: remove redundant 'depends on MODULES'
  module: Fix link failure due to invalid relocation on namespace offset
  usb-storage: export symbols in USB_STORAGE namespace
  usb-storage: remove single-use define for debugging
  docs: Add documentation for Symbol Namespaces
  scripts: Coccinelle script for namespace dependencies.
  modpost: add support for generating namespace dependencies
  export: allow definition default namespaces in Makefiles or sources
  module: add config option MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS
  modpost: add support for symbol namespaces
  module: add support for symbol namespaces.
  export: explicitly align struct kernel_symbol
  module: support reading multiple values per modinfo tag
2019-09-22 10:34:46 -07:00
Matthias Maennich 1d082773ff modpost: add support for generating namespace dependencies
This patch adds an option to modpost to generate a <module>.ns_deps file
per module, containing the namespace dependencies for that module.

E.g. if the linked module my-module.ko would depend on the symbol
myfunc.MY_NS in the namespace MY_NS, the my-module.ns_deps file created
by modpost would contain the entry MY_NS to express the namespace
dependency of my-module imposed by using the symbol myfunc.

These files can subsequently be used by static analysis tools (like
coccinelle scripts) to address issues with missing namespace imports. A
later patch of this series will introduce such a script 'nsdeps' and a
corresponding make target to automatically add missing
MODULE_IMPORT_NS() definitions to the module's sources. For that it uses
the information provided in the generated .ns_deps files.

Co-developed-by: Martijn Coenen <maco@android.com>
Signed-off-by: Martijn Coenen <maco@android.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Matthias Maennich <maennich@google.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
2019-09-10 10:30:38 +02:00
Masahiro Yamada a564bdeb5e .gitignore: ignore modules.order explicitly
The pattern '*.order' was added by commit c6025f4c8b ("kbuild: ignore
*.order files") to ignore modules.order files.

I do not see any other user of the '.order' extension.

Ignore 'modules.order' explicitly instead of '*.order'.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-08-22 01:14:11 +09:00
Toru Komatsu 26c4c71bcd .gitignore: Add compilation database file
This file is used by clangd to use language server protocol.
It can be generated at each compile using scripts/gen_compile_commands.py.
Therefore it is different depending on the environment and should be
ignored.

Signed-off-by: Toru Komatsu <k0ma@utam0k.jp>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-07-27 12:18:19 +09:00
Masahiro Yamada b7dca6dd1e kbuild: create *.mod with full directory path and remove MODVERDIR
While descending directories, Kbuild produces objects for modules,
but do not link final *.ko files; it is done in the modpost.

To keep track of modules, Kbuild creates a *.mod file in $(MODVERDIR)
for every module it is building. Some post-processing steps read the
necessary information from *.mod files. This avoids descending into
directories again. This mechanism was introduced in 2003 or so.

Later, commit 551559e13a ("kbuild: implement modules.order") added
modules.order. So, we can simply read it out to know all the modules
with directory paths. This is easier than parsing the first line of
*.mod files.

$(MODVERDIR) has a flat directory structure, that is, *.mod files
are named only with base names. This is based on the assumption that
the module name is unique across the tree. This assumption is really
fragile.

Stephen Rothwell reported a race condition caused by a module name
conflict:

  https://lkml.org/lkml/2019/5/13/991

In parallel building, two different threads could write to the same
$(MODVERDIR)/*.mod simultaneously.

Non-unique module names are the source of all kind of troubles, hence
commit 3a48a91901 ("kbuild: check uniqueness of module names")
introduced a new checker script.

However, it is still fragile in the build system point of view because
this race happens before scripts/modules-check.sh is invoked. If it
happens again, the modpost will emit unclear error messages.

To fix this issue completely, create *.mod with full directory path
so that two threads never attempt to write to the same file.

$(MODVERDIR) is no longer needed.

Since modules with directory paths are listed in modules.order, Kbuild
is still able to find *.mod files without additional descending.

I also killed cmd_secanalysis; scripts/mod/sumversion.c computes MD4 hash
for modules with MODULE_VERSION(). When CONFIG_DEBUG_SECTION_MISMATCH=y,
it occurs not only in the modpost stage, but also during directory
descending, where sumversion.c may parse stale *.mod files. It would emit
'No such file or directory' warning when an object consisting a module is
renamed, or when a single-obj module is turned into a multi-obj module or
vice versa.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
2019-07-18 02:19:31 +09:00
Masahiro Yamada f46e65da48 .gitignore: exclude .get_maintainer.ignore and .gitattributes
Also, sort the patterns alphabetically. Update the comment since
we have non-git files here.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-05-18 11:49:54 +09:00
Masahiro Yamada 7fb1fc420f .gitignore: add more all*.config patterns
For completeness, ignore all the allconfig variants.

I added a leading slash because they are only searched in the
top of the tree.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-05-08 09:47:46 +09:00
Alexey Gladkov 898490c010 moduleparam: Save information about built-in modules in separate file
Problem:

When a kernel module is compiled as a separate module, some important
information about the kernel module is available via .modinfo section of
the module.  In contrast, when the kernel module is compiled into the
kernel, that information is not available.

Information about built-in modules is necessary in the following cases:

1. When it is necessary to find out what additional parameters can be
passed to the kernel at boot time.

2. When you need to know which module names and their aliases are in
the kernel. This is very useful for creating an initrd image.

Proposal:

The proposed patch does not remove .modinfo section with module
information from the vmlinux at the build time and saves it into a
separate file after kernel linking. So, the kernel does not increase in
size and no additional information remains in it. Information is stored
in the same format as in the separate modules (null-terminated string
array). Because the .modinfo section is already exported with a separate
modules, we are not creating a new API.

It can be easily read in the userspace:

$ tr '\0' '\n' < modules.builtin.modinfo
ext4.softdep=pre: crc32c
ext4.license=GPL
ext4.description=Fourth Extended Filesystem
ext4.author=Remy Card, Stephen Tweedie, Andrew Morton, Andreas Dilger, Theodore Ts'o and others
ext4.alias=fs-ext4
ext4.alias=ext3
ext4.alias=fs-ext3
ext4.alias=ext2
ext4.alias=fs-ext2
md_mod.alias=block-major-9-*
md_mod.alias=md
md_mod.description=MD RAID framework
md_mod.license=GPL
md_mod.parmtype=create_on_open:bool
md_mod.parmtype=start_dirty_degraded:int
...

Co-Developed-by: Gleb Fotengauer-Malinovskiy <glebfm@altlinux.org>
Signed-off-by: Gleb Fotengauer-Malinovskiy <glebfm@altlinux.org>
Signed-off-by: Alexey Gladkov <gladkov.alexey@gmail.com>
Acked-by: Jessica Yu <jeyu@kernel.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-05-07 21:50:24 +09:00
Masahiro Yamada 1e35663e41 .gitignore: add leading and trailing slashes to generated directories
Clarify these directory paths are relative to the top of the source
tree.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-05-07 21:50:23 +09:00
Rob Herring 4f0e3a57d6 kbuild: Add support for DT binding schema checks
This adds the build infrastructure for checking DT binding schema
documents and validating dts files using the binding schema.

Check DT binding schema documents:
make dt_binding_check

Build dts files and check using DT binding schema:
make dtbs_check

Optionally, DT_SCHEMA_FILES can be passed in with a schema file(s) to
use for validation. This makes it easier to find and fix errors
generated by a specific schema.

Currently, the validation targets are separate from a normal build to
avoid a hard dependency on the external DT schema project and because
there are lots of warnings generated.

Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mark Rutland <mark.rutland@arm.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: linux-doc@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-kbuild@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
2018-12-13 09:41:32 -06:00
Linus Torvalds ca71b3ba4c Kbuild updates for v4.17 (2nd)
- pass HOSTLDFLAGS when compiling single .c host programs
 
 - build genksyms lexer and parser files instead of using shipped
   versions
 
 - rename *-asn1.[ch] to *.asn1.[ch] for suffix consistency
 
 - let the top .gitignore globally ignore artifacts generated by
   flex, bison, and asn1_compiler
 
 - let the top Makefile globally clean artifacts generated by
   flex, bison, and asn1_compiler
 
 - use safer .SECONDARY marker instead of .PRECIOUS to prevent
   intermediate files from being removed
 
 - support -fmacro-prefix-map option to make __FILE__ a relative path
 
 - fix # escaping to prepare for the future GNU Make release
 
 - clean up deb-pkg by using debian tools instead of handrolled
   source/changes generation
 
 - improve rpm-pkg portability by supporting kernel-install as a
   fallback of new-kernel-pkg
 
 - extend Kconfig listnewconfig target to provide more information
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJa0krLAAoJED2LAQed4NsGyCAP/3Vsb8A4sea7sE3LV6/aFUJp
 WcAm6PXcip1MXy7GI5yxFciwen3Z3ghQUer7fJKDcHR5c4mRSfKaqWp+TLHd6uux
 7I4pV0FNx2PapcPu5T7wNZHN96p3xZC0Z66sq9BCZ/+gNyYmZLIDcBUSIOEk0nzJ
 IsvD46zy6R6KtEnycShKVscg4JyPXJIw1UBqsPDEFHg5l16ARkghND7e5zTW62Fi
 2MqQxNXAksIKpxxoxPH/fIcNp1kFKVxYBH2CW4LQtOjC3GmrozdeV5PUc7yTezPc
 dpqOuEcIAbMH91bkvhhF+ZBi34YrxRoT4S8B3G9iCXRz+2LRZZaitqO4dAH8Kjbn
 0KjkqzNc5TosJXQ8RPTcQlRBi+JmE1bHxICvTx3XNJcqJMqIH0vs3ez/LJKOwhB4
 DbAROoxQNfVcOdouHcx2EuCSdHn24BEyzaGFhi04LACpbRLxr8IJS7hSGXRloBYp
 K3ydRvG/dCZjFRTS+xWWSi3Nzjih2mCctQlH3D4nf4M3vtCX+/k5B9IMEYFfHlvL
 KoNlK4/1vP/dAJZj0iOqd2ksCA1G6iLoHrFp3E5pdtmb4sVe2Ez3gMt+pxz3htR9
 XvjuHOzkWE9eiihs1NsFgQuyP/o3UmNKpDDW0irQ06IFEPXkA/y1mVmeTU3qtrII
 ZDiwGozIkMMEy/MLkcjE
 =tD6R
 -----END PGP SIGNATURE-----

Merge tag 'kbuild-v4.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull more Kbuild updates from Masahiro Yamada:

 - pass HOSTLDFLAGS when compiling single .c host programs

 - build genksyms lexer and parser files instead of using shipped
   versions

 - rename *-asn1.[ch] to *.asn1.[ch] for suffix consistency

 - let the top .gitignore globally ignore artifacts generated by flex,
   bison, and asn1_compiler

 - let the top Makefile globally clean artifacts generated by flex,
   bison, and asn1_compiler

 - use safer .SECONDARY marker instead of .PRECIOUS to prevent
   intermediate files from being removed

 - support -fmacro-prefix-map option to make __FILE__ a relative path

 - fix # escaping to prepare for the future GNU Make release

 - clean up deb-pkg by using debian tools instead of handrolled
   source/changes generation

 - improve rpm-pkg portability by supporting kernel-install as a
   fallback of new-kernel-pkg

 - extend Kconfig listnewconfig target to provide more information

* tag 'kbuild-v4.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kconfig: extend output of 'listnewconfig'
  kbuild: rpm-pkg: use kernel-install as a fallback for new-kernel-pkg
  Kbuild: fix # escaping in .cmd files for future Make
  kbuild: deb-pkg: split generating packaging and build
  kbuild: use -fmacro-prefix-map to make __FILE__ a relative path
  kbuild: mark $(targets) as .SECONDARY and remove .PRECIOUS markers
  kbuild: rename *-asn1.[ch] to *.asn1.[ch]
  kbuild: clean up *-asn1.[ch] patterns from top-level Makefile
  .gitignore: move *-asn1.[ch] patterns to the top-level .gitignore
  kbuild: add %.dtb.S and %.dtb to 'targets' automatically
  kbuild: add %.lex.c and %.tab.[ch] to 'targets' automatically
  genksyms: generate lexer and parser during build instead of shipping
  kbuild: clean up *.lex.c and *.tab.[ch] patterns from top-level Makefile
  .gitignore: move *.lex.c *.tab.[ch] patterns to the top-level .gitignore
  kbuild: use HOSTLDFLAGS for single .c executables
2018-04-15 17:21:30 -07:00
Miguel Ojeda d4ef8d3ff0 clang-format: add configuration file
clang-format is a tool to format C/C++/...  code according to a set of
rules and heuristics.  Like most tools, it is not perfect nor covers
every single case, but it is good enough to be helpful.

In particular, it is useful for quickly re-formatting blocks of code
automatically, for reviewing full files in order to spot coding style
mistakes, typos and possible improvements.  It is also handy for sorting
``#includes``, for aligning variables and macros, for reflowing text and
other similar tasks.  It also serves as a teaching tool/guide for
newcomers.

The tool itself has been already included in the repositories of popular
Linux distributions for a long time.  The rules in this file are
intended for clang-format >= 4, which is easily available in most
distributions.

This commit adds the configuration file that contains the rules that the
tool uses to know how to format the code according to the kernel coding
style.  This gives us several advantages:

  * clang-format works out of the box with reasonable defaults;
    avoiding that everyone has to re-do the configuration.

  * Everyone agrees (eventually) on what is the most useful default
    configuration for most of the kernel.

  * If it becomes commonplace among kernel developers, clang-format
    may feel compelled to support us better. They already recognize
    the Linux kernel and its style in their documentation and in one
    of the style sub-options.

Some of clang-format's features relevant for the kernel are:

  * Uses clang's tooling support behind the scenes to parse and rewrite
    the code. It is not based on ad-hoc regexps.

  * Supports reasonably well the Linux kernel coding style.

  * Fast enough to be used at the press of a key.

  * There are already integrations (either built-in or third-party)
    for many common editors used by kernel developers (e.g. vim,
    emacs, Sublime, Atom...) that allow you to format an entire file
    or, more usefully, just your selection.

  * Able to parse unified diffs -- you can, for instance, reformat
    only the lines changed by a git commit.

  * Able to reflow text comments as well.

  * Widely supported and used by hundreds of developers in highly
    complex projects and organizations (e.g. the LLVM project itself,
    Chromium, WebKit, Google, Mozilla...). Therefore, it will be
    supported for a long time.

See more information about the tool at:

    https://clang.llvm.org/docs/ClangFormat.html
    https://clang.llvm.org/docs/ClangFormatStyleOptions.html

Link: http://lkml.kernel.org/r/20180318171632.qfkemw3mwbcukth6@gmail.com
Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Joe Perches <joe@perches.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-11 10:28:35 -07:00
Masahiro Yamada 4fa8bc949d kbuild: rename *-asn1.[ch] to *.asn1.[ch]
Our convention is to distinguish file types by suffixes with a period
as a separator.

*-asn1.[ch] is a different pattern from other generated sources such
as *.lex.c, *.tab.[ch], *.dtb.S, etc.  More confusing, files with
'-asn1.[ch]' are generated files, but '_asn1.[ch]' are checked-in
files:
  net/netfilter/nf_conntrack_h323_asn1.c
  include/linux/netfilter/nf_conntrack_h323_asn1.h
  include/linux/sunrpc/gss_asn1.h

Rename generated files to *.asn1.[ch] for consistency.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-04-07 19:04:02 +09:00
Masahiro Yamada 9ce285cfe3 .gitignore: move *-asn1.[ch] patterns to the top-level .gitignore
These are common patterns where source files are parsed by the
asn1_compiler.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-04-07 19:04:02 +09:00
Masahiro Yamada 5988930027 .gitignore: move *.lex.c *.tab.[ch] patterns to the top-level .gitignore
These patterns are common to host programs that require lexer and parser.
Move them to the top .gitignore.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Frank Rowand <frowand.list@gmail.com>
2018-04-07 19:04:02 +09:00
Masahiro Yamada fbfa9be990 kbuild: move include/config/ksym/* to include/ksym/*
The idea of using fixdep was inspired by Kconfig, but autoksyms
belongs to a different group.  So, I want to move those touched
files under include/config/ksym/ to include/ksym/.

The directory include/ksym/ can be removed by 'make clean' because
it is meaningless for the external module building.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
2018-03-26 02:01:23 +09:00
Zhu Lingshan d682026dd3 .gitignore: ignore ASN.1 auto generated files
when build kernel with default configure, files:

generatenet/ipv4/netfilter/nf_nat_snmp_basic-asn1.c
net/ipv4/netfilter/nf_nat_snmp_basic-asn1.h

will be automatically generated by ASN.1 compiler, so
No need to track them in git, it's better to ignore them.

Signed-off-by: Zhu Lingshan <lszhu@suse.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-02-14 21:05:38 +01:00
Paolo Pisati 5704d4557f scripts/package: snap-pkg target
Following in footsteps of other targets like 'deb-pkg, 'rpm-pkg' and 'tar-pkg',
this patch adds a 'snap-pkg' target for the creation of a Linux kernel snap
package using the kbuild infrastructure.

A snap, in its general form, is a self contained, sandboxed, universal package
and it is intended to work across multiple distributions and/or devices. A snap
package is distributed as a single compressed squashfs filesystem.

A kernel snap is a snap package carrying the Linux kernel, kernel modules,
accessory files (DTBs, System.map, etc) and a manifesto file.  The purpose of a
kernel snap is to carry the Linux kernel during the creation of a system image,
eg. Ubuntu Core, and its subsequent upgrades.

For more information on snap packages: https://snapcraft.io/docs/

Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-12-13 00:00:18 +09:00
Linus Torvalds 2ce079f04d Kbuild misc updates for v4.15
- Clean up and fix RPM package build
 
 - Fix a warning in DEB package build
 
 - Improve coccicheck script
 
 - Improve some semantic patches
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJaDxwTAAoJED2LAQed4NsGtJAQAK1VnxVqcGznoy0CXg7vA93D
 iIstHN1AR1uFJgTEFU7PwKDd7zJ78R1lN0BeZat70RS4pv8YMvCFpjPajMbF0KHz
 zjRARuy+MKbWQVBGg7BjFaFcQqLrYLasIfp3nXDOBoyTxvaqvV/4HtyKISxYnY1n
 3vSoVm/JacwT9KZ3496eV8hZcO2pbpo4PvT5T/WGKzHCnHRjv40kCMj8a+BDLWWD
 LJ5CHXQRmzMTBR8J7OMVbaUl8JgJb/Gl6yAKnfNXVqaxzSMunWMC0cUEXjJ3kxEf
 wmthF99p4Og8Fe+eT5yUzODwPdH/JDqULaMKo1BSuQbB0ck0BRavlRvvTlv7ptKk
 5eoHoxop0GCNgsbhcXhpTQTDLqkGBtLVUD6pjUVGF5mtHIJ1m4GnNJ+4+cf453lr
 szhg0mOATydkOTQYg1oeWACXfoagbSieQQsQx5LIX3HTx3I+RW9FGEB7TltEGuoL
 cE+ijhIZZmFo7wHjcdW2FPV0A+qRYRPW//O2t7Zu/S/uRkrgTmpvIKPtoAfj7y+4
 c74LcsWyVB1TCMtbc2oJUyY6ltDuwTEA9i/FCr+GgaG3OHbmw7YEYewbhV9m4+Yr
 t3jNwJ+6TuxWX23RQPFgalAlf8XMr5MM0cF89Io0BZEIaoWWIGw1YiMxzL0Su61h
 eauy22XUBzZ2ewkcuq3v
 =7aYW
 -----END PGP SIGNATURE-----

Merge tag 'kbuild-misc-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild misc updates from Masahiro Yamada:

 - Clean up and fix RPM package build

 - Fix a warning in DEB package build

 - Improve coccicheck script

 - Improve some semantic patches

* tag 'kbuild-misc-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  docs: dev-tools: coccinelle: delete out of date wiki reference
  coccinelle: orplus: reorganize to improve performance
  coccinelle: use exists to improve efficiency
  builddeb: Pass the kernel:debarch substvar to dpkg-genchanges
  Coccinelle: use false positive annotation
  coccinelle: fix verbose message about .cocci file being run
  coccinelle: grep Options and Requires fields more precisely
  Coccinelle: make DEBUG_FILE option more useful
  coccinelle: api: detect identical chip data arrays
  coccinelle: Improve setup_timer.cocci matching
  Coccinelle: setup_timer: improve messages from setup_timer
  kbuild: rpm-pkg: do not force -jN in submake
  kbuild: rpm-pkg: keep spec file until make mrproper
  kbuild: rpm-pkg: fix jobserver unavailable warning
  kbuild: rpm-pkg: replace $RPM_BUILD_ROOT with %{buildroot}
  kbuild: rpm-pkg: fix build error when CONFIG_MODULES is disabled
  kbuild: rpm-pkg: refactor mkspec with here doc
  kbuild: rpm-pkg: clean up mkspec
  kbuild: rpm-pkg: install vmlinux.bz2 unconditionally
  kbuild: rpm-pkg: remove ppc64 specific image handling
2017-11-17 17:51:33 -08:00
Masahiro Yamada af60e20708 kbuild: rpm-pkg: keep spec file until make mrproper
If build fails during (bin)rpm-pkg, the spec file is not cleaned by
anyone until the next successful build of the package.

We do not have to immediately delete the spec file in case somebody
may want to take a look at it.  Instead, make them ignored by git,
and cleaned up by make mrproper.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-11-14 23:19:01 +09:00
Masahiro Yamada 10b62a2f78 .gitignore: move *.dtb and *.dtb.S patterns to the top-level .gitignore
Most of DT files are compiled under arch/*/boot/dts/, but we have some
other directories, like drivers/of/unittest-data/.  We often miss to
add gitignore patterns per directory.  Since there are no source files
that end with .dtb or .dtb.S, we can ignore the patterns globally.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Rob Herring <robh@kernel.org>
2017-11-08 11:20:24 -06:00
Masahiro Yamada 1377dd3e29 .gitignore: sort normal pattern rules alphabetically
We are having more and more ignore patterns.  Sort the list
alphabetically.  We will easily catch duplicated patterns if any.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Rob Herring <robh@kernel.org>
2017-11-08 11:20:23 -06:00
Vinícius Tinti 433db3e260 kbuild: Add support to generate LLVM assembly files
Add rules to kbuild in order to generate LLVM assembly files with the .ll
extension when using clang.

  # from c code
  make CC=clang kernel/pid.ll

Signed-off-by: Vinícius Tinti <viniciustinti@gmail.com>
Signed-off-by: Behan Webster <behanw@converseincode.com>
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-04-25 08:13:52 +09:00
Linus Torvalds 44cee85a88 Merge branch 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Pull misc kbuild updates from Michal Marek:

 - coccicheck script improvements by Luis Rodriguez and Deepa Dinamani

 - new coccinelle patches by Yann Droneaud and Vaishali Thakkar

 - debian packaging fixes by Wilfried Klaebe, Henning Schild and Marcin
   Mielniczuk

* 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  Fix the Debian packaging script on systems with no codename
  builddeb: fix file permissions before packaging
  scripts/coccinelle: require coccinelle >= 1.0.4 on device_node_continue.cocci
  coccicheck: refer to Documentation/coccinelle.txt and wiki
  coccicheck: add support for requring a coccinelle version
  scripts: add Linux .cocciconfig for coccinelle
  coccicheck: replace --very-quiet with --quiet when debugging
  coccicheck: add support for DEBUG_FILE
  coccicheck: enable parmap support
  coccicheck: make SPFLAGS more useful
  coccicheck: move spatch binary check up
  builddeb: really include objtool binary in headers package
  coccinelle: catch krealloc() on devm_*() allocated memory
  coccinelle: recognize more devm_* memory allocation functions
  coccinelle: also catch kzfree() issues
  coccicheck: Allow for overriding spatch flags
  Coccinelle: noderef: Add new rules and correct the old rule
2016-08-02 16:48:52 -04:00
Luis R. Rodriguez dd951fc1b6 scripts: add Linux .cocciconfig for coccinelle
Coccinelle supports reading .cocciconfig, the order of precedence for
variables for .cocciconfig is as follows:

 o Your current user's home directory is processed first
 o Your directory from which spatch is called is processed next
 o The directory provided with the --dir option is processed last, if used

Since coccicheck runs through make, it naturally runs from the kernel
proper dir, as such the second rule above would be implied for picking up a
.cocciconfig when using 'make coccicheck'.

'make coccicheck' also supports using M= targets.If you do not supply
any M= target, it is assumed you want to target the entire kernel.
The kernel coccicheck script has:

    if [ "$KBUILD_EXTMOD" = "" ] ; then
        OPTIONS="--dir $srctree $COCCIINCLUDE"
    else
        OPTIONS="--dir $KBUILD_EXTMOD $COCCIINCLUDE"
    fi

KBUILD_EXTMOD is set when an explicit target with M= is used. For both cases
the spatch --dir argument is used, as such third rule applies when
whether M= is used or not, and when M= is used the target directory can
have its own .cocciconfig file. When M= is not passed as an argument to
coccicheck the target directory is the same as the directory from where
spatch was called.

If not using the kernel's coccicheck target, keep the above precedence order
logic of .cocciconfig reading. If using the kernel's coccicheck target,
override any of the kernel's .coccicheck's settings using SPFLAGS.

We help Coccinelle when used against Linux with a set of sensible defaults
options for Linux with our own Linux .cocciconfig. This hints to coccinelle
git can be used for 'git grep' queries over coccigrep. A timeout of 200
seconds should suffice for now.

The options picked up by coccinelle when reading a .cocciconfig do not appear
as arguments to spatch processes running on your system, to confirm what
options will be used by Coccinelle run:

  spatch --print-options-only

You can override with your own preferred index option by using SPFLAGS.
Coccinelle supports both glimpse and idutils. Glimpse had historically
provided the best performance, however recent benchmarks reveal idutils
is performing just as well. Due to some recent fixes however you however
will need at least coccinelle >= 1.0.6 if using idutils.

Coccinelle carries a script scripts/idutils_index.sh which creates the
idutils database with as follows:

    mkid -i C --output .id-utils.index

If using just "--use-idutils" coccinelle expects your idutils database to be
on the top level of the kernel as a file named ".id-utils.index". If you do
not use this you can symlink your database file to it, or you can specify the
database file following the "--use-idutils" argument. Examples:

    make SPFLAGS=--use-idutils coccicheck

This assumes you have $srctree/.id-utils.index, where $srctree is
the top level of the kernel.

    make SPFLAGS="--use-idutils /full-path/to/ID" coccicheck

Here you specify the full path of the idutils ID database. Using
.cocciconfig is possible, however given the order of precedence followed
by Coccinelle, and since the kernel now carries its own .cocciconfig,
you will need to use SPFLAGS to use idutils if desired.

v4:

o Recommend upgrade for using idutils with coccinelle due to some
  recent fixes.

o Refer to using --print-options-only for testing what options are
  picked up by .cocciconfig reading.

o Expand commit log considerably explaining *why* .cocconfig from
  two precedence rules are used when using coccicheck, and how to
  properly override these if needed.

o Expand Documentation/coccinelle.txt

v3: Expand commit log a bit more

Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Michal Marek <mmarek@suse.com>
2016-07-22 12:13:39 +02:00
Emese Revfy 6b90bd4ba4 GCC plugin infrastructure
This patch allows to build the whole kernel with GCC plugins. It was ported from
grsecurity/PaX. The infrastructure supports building out-of-tree modules and
building in a separate directory. Cross-compilation is supported too.
Currently the x86, arm, arm64 and uml architectures enable plugins.

The directory of the gcc plugins is scripts/gcc-plugins. You can use a file or a directory
there. The plugins compile with these options:
 * -fno-rtti: gcc is compiled with this option so the plugins must use it too
 * -fno-exceptions: this is inherited from gcc too
 * -fasynchronous-unwind-tables: this is inherited from gcc too
 * -ggdb: it is useful for debugging a plugin (better backtrace on internal
    errors)
 * -Wno-narrowing: to suppress warnings from gcc headers (ipa-utils.h)
 * -Wno-unused-variable: to suppress warnings from gcc headers (gcc_version
    variable, plugin-version.h)

The infrastructure introduces a new Makefile target called gcc-plugins. It
supports all gcc versions from 4.5 to 6.0. The scripts/gcc-plugin.sh script
chooses the proper host compiler (gcc-4.7 can be built by either gcc or g++).
This script also checks the availability of the included headers in
scripts/gcc-plugins/gcc-common.h.

The gcc-common.h header contains frequently included headers for GCC plugins
and it has a compatibility layer for the supported gcc versions.

The gcc-generate-*-pass.h headers automatically generate the registration
structures for GIMPLE, SIMPLE_IPA, IPA and RTL passes.

Note that 'make clean' keeps the *.so files (only the distclean or mrproper
targets clean all) because they are needed for out-of-tree modules.

Based on work created by the PaX Team.

Signed-off-by: Emese Revfy <re.emese@gmail.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Michal Marek <mmarek@suse.com>
2016-06-07 22:57:10 +02:00
Kyeongmin Cho 52bbe141f3 gitignore: fix wording
Git files are the files that we don't want to ignore even if
they are dot-files. It must be "even if" but it says "even it".

Signed-off-by: Kyeongmin Cho <korea.drzix@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-04-28 11:01:23 +02:00
Linus Torvalds d9241b22b5 Merge branch 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Pull misc kbuild updates from Michal Marek:
 - deb-pkg:
     + module signing fix
     + dtb files are added to the package
     + do not require `hostname -f` to work during build
     + make deb-pkg generates a source package, bindeb-pkg has been
       added to only generate the binary package
 - rpm-pkg packages /lib/modules as well
 - new coccinelle patch and updates to existing ones
 - new stackusage & stackdelta script to collect and compare stack usage
   info (using gcc's -fstack-usage)
 - make tags understands trace_*_rcuidle() macros
 - .gitignore updates, misc cleanups

* 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: (27 commits)
  deb-pkg: add source package
  package/Makefile: move source tar creation to a function
  scripts: add stackdelta script
  kbuild: remove *.su files generated by -fstack-usage
  .gitignore: add *.su pattern
  scripts: add stackusage script
  kbuild: avoid listing /lib/modules in kernel spec file
  fallback to hostname in scripts/package/builddeb
  coccinelle: api: extend spatch for dropping unnecessary owner
  deb-pkg: simplify directory creation
  scripts/tags.sh: Include trace_*_rcuidle() in tags
  scripts/package/Makefile: rpmbuild is needed for rpm targets
  Kbuild: Add ID files to .gitignore
  gitignore: Add MIPS vmlinux.32 to the list
  coccinelle: simple_return: Add a blank line
  coccinelle: irqf_oneshot.cocci: Improve the generated commit log
  coccinelle: api: add vma_pages.cocci
  scripts/coccinelle/misc/irqf_oneshot.cocci: Fix grammar
  scripts/coccinelle/misc/semicolon.cocci: Use imperative mood
  coccinelle: simple_open: Use imperative mood
  ...
2015-09-08 14:23:13 -07:00
Rasmus Villemoes e25572878a .gitignore: add *.su pattern
Ignore the *.su files generated by using the gcc option -fstack-usage.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Michal Marek <mmarek@suse.com>
2015-08-28 17:04:40 +02:00
David Woodhouse fb11794991 modsign: Use single PEM file for autogenerated key
The current rule for generating signing_key.priv and signing_key.x509 is
a classic example of a bad rule which has a tendency to break parallel
make. When invoked to create *either* target, it generates the other
target as a side-effect that make didn't predict.

So let's switch to using a single file signing_key.pem which contains
both key and certificate. That matches what we do in the case of an
external key specified by CONFIG_MODULE_SIG_KEY anyway, so it's also
slightly cleaner.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: David Howells <dhowells@redhat.com>
2015-08-07 16:26:14 +01:00
Andi Kleen a37161c058 Kbuild: Add ID files to .gitignore
I use GNU id-utils to find code (essentially a database backed grep),
which generates an ID file to maintain its data.

Add ID to the .gitignore file.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2015-06-15 14:36:13 +02:00
Florian Fainelli d0fe116b45 gitignore: Add MIPS vmlinux.32 to the list
MIPS64 kernels builds will produce a vmlinux.32 kernel image for
compatibility, ignore them.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2015-06-15 11:10:32 +02:00
Andrey Skvortsov f4ae949728 .gitignore: ignore *.tar
Running make tar-pkg results in following:

 # Untracked files:
 #   (use "git add <file>..." to include in what will be committed)
 #
 #       linux-4.0.0-rc3-next-20150313-150225--x86.tar

This patch makes git ignore *.tar files.
Running 'git ls-files -i --exclude-standard' does not show any
tar files excluded from tracking after the change.

Signed-off-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Boaz Harrosh <boaz@plexistor.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-17 09:04:11 -04:00
Daniel Thompson 2478a8a15c scripts/gdb: ignore byte-compiled python files
Using the gdb scripts leaves byte-compiled python files in the scripts/
directory.  These should be ignored by git.

[jan.kiszka@siemens.com: drop redundant mrproper rule as suggested by Michal]
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Borislav Petkov <bp@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-17 14:34:54 -08:00