This is not being used to pass ops, it is just a way to tell if an
iommu driver was probed. These days this can be detected directly via
device_iommu_mapped(). Call device_iommu_mapped() in the two places that
need to check it and remove the iommu parameter everywhere.
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Moritz Fischer <mdf@kernel.org>
Acked-by: Christoph Hellwig <hch@lst.de>
Acked-by: Rob Herring <robh@kernel.org>
Tested-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/1-v2-16e4def25ebb+820-iommu_fwspec_p1_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Here is the big set of tty/serial driver changes for 6.7-rc1. Included
in here are:
- console/vgacon cleanups and removals from Arnd
- tty core and n_tty cleanups from Jiri
- lots of 8250 driver updates and cleanups
- sc16is7xx serial driver updates
- dt binding updates
- first set of port lock wrapers from Thomas for the printk fixes
coming in future releases
- other small serial and tty core cleanups and updates
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZUTbaw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yk9+gCeKdoRb8FDwGCO/GaoHwR4EzwQXhQAoKXZRmN5
LTtw9sbfGIiBdOTtgLPb
=6PJr
-----END PGP SIGNATURE-----
Merge tag 'tty-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty and serial updates from Greg KH:
"Here is the big set of tty/serial driver changes for 6.7-rc1. Included
in here are:
- console/vgacon cleanups and removals from Arnd
- tty core and n_tty cleanups from Jiri
- lots of 8250 driver updates and cleanups
- sc16is7xx serial driver updates
- dt binding updates
- first set of port lock wrapers from Thomas for the printk fixes
coming in future releases
- other small serial and tty core cleanups and updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (193 commits)
serdev: Replace custom code with device_match_acpi_handle()
serdev: Simplify devm_serdev_device_open() function
serdev: Make use of device_set_node()
tty: n_gsm: add copyright Siemens Mobility GmbH
tty: n_gsm: fix race condition in status line change on dead connections
serial: core: Fix runtime PM handling for pending tx
vgacon: fix mips/sibyte build regression
dt-bindings: serial: drop unsupported samsung bindings
tty: serial: samsung: drop earlycon support for unsupported platforms
tty: 8250: Add note for PX-835
tty: 8250: Fix IS-200 PCI ID comment
tty: 8250: Add Brainboxes Oxford Semiconductor-based quirks
tty: 8250: Add support for Intashield IX cards
tty: 8250: Add support for additional Brainboxes PX cards
tty: 8250: Fix up PX-803/PX-857
tty: 8250: Fix port count of PX-257
tty: 8250: Add support for Intashield IS-100
tty: 8250: Add support for Brainboxes UP cards
tty: 8250: Add support for additional Brainboxes UC cards
tty: 8250: Remove UC-257 and UC-431
...
The two hyperv framebuffer drivers (hyperv_fb or hyperv_drm_drv) access the
global screen_info in order to take over from the sysfb framebuffer, which
in turn could be handled by simplefb, simpledrm or efifb. Similarly, the
vmbus_drv code marks the original EFI framebuffer as reserved, but this
is not required if there is no sysfb.
As a preparation for making screen_info itself more local to the sysfb
helper code, add a compile-time conditional in all three files that relate
to hyperv fb and just skip this code if there is no sysfb that needs to
be unregistered.
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Helge Deller <deller@gmx.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20231009211845.3136536-9-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit comes at the tail end of a greater effort to remove the
empty elements at the end of the ctl_table arrays (sentinels) which
will reduce the overall build time size of the kernel and run time
memory bloat by ~64 bytes per sentinel (further information Link :
https://lore.kernel.org/all/ZO5Yx5JFogGi%2FcBo@bombadil.infradead.org/)
Remove sentinel from hv_ctl_table
Signed-off-by: Joel Granados <j.granados@samsung.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAmT0EE8THHdlaS5saXVA
a2VybmVsLm9yZwAKCRB2FHBfkEGgXg5FCACGJ6n2ikhtRHAENHIVY/mTh+HbhO07
ERzjADfqKF43u1Nt9cslgT4MioqwLjQsAu/A0YcJgVxVSOtg7dnbDmurRAjrGT/3
iKqcVvnaiwSV44TkF8evpeMttZSOg29ImmpyQjoZJJvDMfpxleEK53nuKB9EsjKL
Mz/0gSPoNc79bWF+85cVhgPnGIh9nBarxHqVsuWjMhc+UFhzjf9mOtk34qqPfJ1Q
4RsKGEjkVkeXoG6nGd6Gl/+8WoTpenOZQLchhInocY+k9FlAzW1Kr+ICLDx+Topw
8OJ6fv2rMDOejT9aOaA3/imf7LMer0xSUKb6N0sqQAQX8KzwcOYyKtQJ
=rC/v
-----END PGP SIGNATURE-----
Merge tag 'hyperv-next-signed-20230902' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv updates from Wei Liu:
- Support for SEV-SNP guests on Hyper-V (Tianyu Lan)
- Support for TDX guests on Hyper-V (Dexuan Cui)
- Use SBRM API in Hyper-V balloon driver (Mitchell Levy)
- Avoid dereferencing ACPI root object handle in VMBus driver (Maciej
Szmigiero)
- A few misecllaneous fixes (Jiapeng Chong, Nathan Chancellor, Saurabh
Sengar)
* tag 'hyperv-next-signed-20230902' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: (24 commits)
x86/hyperv: Remove duplicate include
x86/hyperv: Move the code in ivm.c around to avoid unnecessary ifdef's
x86/hyperv: Remove hv_isolation_type_en_snp
x86/hyperv: Use TDX GHCI to access some MSRs in a TDX VM with the paravisor
Drivers: hv: vmbus: Bring the post_msg_page back for TDX VMs with the paravisor
x86/hyperv: Introduce a global variable hyperv_paravisor_present
Drivers: hv: vmbus: Support >64 VPs for a fully enlightened TDX/SNP VM
x86/hyperv: Fix serial console interrupts for fully enlightened TDX guests
Drivers: hv: vmbus: Support fully enlightened TDX guests
x86/hyperv: Support hypercalls for fully enlightened TDX guests
x86/hyperv: Add hv_isolation_type_tdx() to detect TDX guests
x86/hyperv: Fix undefined reference to isolation_type_en_snp without CONFIG_HYPERV
x86/hyperv: Add missing 'inline' to hv_snp_boot_ap() stub
hv: hyperv.h: Replace one-element array with flexible-array member
Drivers: hv: vmbus: Don't dereference ACPI root object handle
x86/hyperv: Add hyperv-specific handling for VMMCALL under SEV-ES
x86/hyperv: Add smp support for SEV-SNP guest
clocksource: hyper-v: Mark hyperv tsc page unencrypted in sev-snp enlightened guest
x86/hyperv: Use vmmcall to implement Hyper-V hypercall in sev-snp enlightened guest
drivers: hv: Mark percpu hvcall input arg page unencrypted in SEV-SNP enlightened guest
...
In ms_hyperv_init_platform(), do not distinguish between a SNP VM with
the paravisor and a SNP VM without the paravisor.
Replace hv_isolation_type_en_snp() with
!ms_hyperv.paravisor_present && hv_isolation_type_snp().
The hv_isolation_type_en_snp() in drivers/hv/hv.c and
drivers/hv/hv_common.c can be changed to hv_isolation_type_snp() since
we know !ms_hyperv.paravisor_present is true there.
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Tianyu Lan <tiala@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/20230824080712.30327-10-decui@microsoft.com
The post_msg_page was removed in
commit 9a6b1a170c ("Drivers: hv: vmbus: Remove the per-CPU post_msg_page")
However, it turns out that we need to bring it back, but only for a TDX VM
with the paravisor: in such a VM, the hyperv_pcpu_input_arg is not decrypted,
but the HVCALL_POST_MESSAGE in such a VM needs a decrypted page as the
hypercall input page: see the comments in hyperv_init() for a detailed
explanation.
Except for HVCALL_POST_MESSAGE and HVCALL_SIGNAL_EVENT, the other hypercalls
in a TDX VM with the paravisor still use hv_hypercall_pg and must use the
hyperv_pcpu_input_arg (which is encrypted in such a VM), when a hypercall
input page is used.
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Tianyu Lan <tiala@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/20230824080712.30327-8-decui@microsoft.com
The new variable hyperv_paravisor_present is set only when the VM
is a SNP/TDX VM with the paravisor running: see ms_hyperv_init_platform().
We introduce hyperv_paravisor_present because we can not use
ms_hyperv.paravisor_present in arch/x86/include/asm/mshyperv.h:
struct ms_hyperv_info is defined in include/asm-generic/mshyperv.h, which
is included at the end of arch/x86/include/asm/mshyperv.h, but at the
beginning of arch/x86/include/asm/mshyperv.h, we would already need to use
struct ms_hyperv_info in hv_do_hypercall().
We use hyperv_paravisor_present only in include/asm-generic/mshyperv.h,
and use ms_hyperv.paravisor_present elsewhere. In the future, we'll
introduce a hypercall function structure for different VM types, and
at boot time, the right function pointers would be written into the
structure so that runtime testing of TDX vs. SNP vs. normal will be
avoided and hyperv_paravisor_present will no longer be needed.
Call hv_vtom_init() when it's a VBS VM or when ms_hyperv.paravisor_present
is true, i.e. the VM is a SNP VM or TDX VM with the paravisor.
Enhance hv_vtom_init() for a TDX VM with the paravisor.
In hv_common_cpu_init(), don't decrypt the hyperv_pcpu_input_arg
for a TDX VM with the paravisor, just like we don't decrypt the page
for a SNP VM with the paravisor.
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Tianyu Lan <tiala@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/20230824080712.30327-7-decui@microsoft.com
Don't set *this_cpu_ptr(hyperv_pcpu_input_arg) before the function
set_memory_decrypted() returns, otherwise we run into this ticky issue:
For a fully enlightened TDX/SNP VM, in hv_common_cpu_init(),
*this_cpu_ptr(hyperv_pcpu_input_arg) is an encrypted page before
the set_memory_decrypted() returns.
When such a VM has more than 64 VPs, if the hyperv_pcpu_input_arg is not
NULL, hv_common_cpu_init() -> set_memory_decrypted() -> ... ->
cpa_flush() -> on_each_cpu() -> ... -> hv_send_ipi_mask() -> ... ->
__send_ipi_mask_ex() tries to call hv_do_rep_hypercall() with the
hyperv_pcpu_input_arg as the hypercall input page, which must be a
decrypted page in such a VM, but the page is still encrypted at this
point, and a fatal fault is triggered.
Fix the issue by setting *this_cpu_ptr(hyperv_pcpu_input_arg) after
set_memory_decrypted(): if the hyperv_pcpu_input_arg is NULL,
__send_ipi_mask_ex() returns HV_STATUS_INVALID_PARAMETER immediately,
and hv_send_ipi_mask() falls back to orig_apic.send_IPI_mask(),
which can use x2apic_send_IPI_all(), which may be slightly slower than
the hypercall but still works correctly in such a VM.
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Tianyu Lan <tiala@microsoft.com>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/20230824080712.30327-6-decui@microsoft.com
Add Hyper-V specific code so that a fully enlightened TDX guest (i.e.
without the paravisor) can run on Hyper-V:
Don't use hv_vp_assist_page. Use GHCI instead.
Don't try to use the unsupported HV_REGISTER_CRASH_CTL.
Don't trust (use) Hyper-V's TLB-flushing hypercalls.
Don't use lazy EOI.
Share the SynIC Event/Message pages with the hypervisor.
Don't use the Hyper-V TSC page for now, because non-trivial work is
required to share the page with the hypervisor.
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/20230824080712.30327-4-decui@microsoft.com
A fully enlightened TDX guest on Hyper-V (i.e. without the paravisor) only
uses the GHCI call rather than hv_hypercall_pg. Do not initialize
hypercall_pg for such a guest.
In hv_common_cpu_init(), the hyperv_pcpu_input_arg page needs to be
decrypted in such a guest.
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Tianyu Lan <tiala@microsoft.com>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/20230824080712.30327-3-decui@microsoft.com
No logic change to SNP/VBS guests.
hv_isolation_type_tdx() will be used to instruct a TDX guest on Hyper-V to
do some TDX-specific operations, e.g. for a fully enlightened TDX guest
(i.e. without the paravisor), hv_do_hypercall() should use
__tdx_hypercall() and such a guest on Hyper-V should handle the Hyper-V
Event/Message/Monitor pages specially.
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Tianyu Lan <tiala@microsoft.com>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/20230824080712.30327-2-decui@microsoft.com
Since the commit referenced in the Fixes: tag below the VMBus client driver
is walking the ACPI namespace up from the VMBus ACPI device to the ACPI
namespace root object trying to find Hyper-V MMIO ranges.
However, if it is not able to find them it ends trying to walk resources of
the ACPI namespace root object itself.
This object has all-ones handle, which causes a NULL pointer dereference
in the ACPI code (from dereferencing this pointer with an offset).
This in turn causes an oops on boot with VMBus host implementations that do
not provide Hyper-V MMIO ranges in their VMBus ACPI device or its
ancestors.
The QEMU VMBus implementation is an example of such implementation.
I guess providing these ranges is optional, since all tested Windows
versions seem to be able to use VMBus devices without them.
Fix this by explicitly terminating the lookup at the ACPI namespace root
object.
Note that Linux guests under KVM/QEMU do not use the Hyper-V PV interface
by default - they only do so if the KVM PV interface is missing or
disabled.
Example stack trace of such oops:
[ 3.710827] ? __die+0x1f/0x60
[ 3.715030] ? page_fault_oops+0x159/0x460
[ 3.716008] ? exc_page_fault+0x73/0x170
[ 3.716959] ? asm_exc_page_fault+0x22/0x30
[ 3.717957] ? acpi_ns_lookup+0x7a/0x4b0
[ 3.718898] ? acpi_ns_internalize_name+0x79/0xc0
[ 3.720018] acpi_ns_get_node_unlocked+0xb5/0xe0
[ 3.721120] ? acpi_ns_check_object_type+0xfe/0x200
[ 3.722285] ? acpi_rs_convert_aml_to_resource+0x37/0x6e0
[ 3.723559] ? down_timeout+0x3a/0x60
[ 3.724455] ? acpi_ns_get_node+0x3a/0x60
[ 3.725412] acpi_ns_get_node+0x3a/0x60
[ 3.726335] acpi_ns_evaluate+0x1c3/0x2c0
[ 3.727295] acpi_ut_evaluate_object+0x64/0x1b0
[ 3.728400] acpi_rs_get_method_data+0x2b/0x70
[ 3.729476] ? vmbus_platform_driver_probe+0x1d0/0x1d0 [hv_vmbus]
[ 3.730940] ? vmbus_platform_driver_probe+0x1d0/0x1d0 [hv_vmbus]
[ 3.732411] acpi_walk_resources+0x78/0xd0
[ 3.733398] vmbus_platform_driver_probe+0x9f/0x1d0 [hv_vmbus]
[ 3.734802] platform_probe+0x3d/0x90
[ 3.735684] really_probe+0x19b/0x400
[ 3.736570] ? __device_attach_driver+0x100/0x100
[ 3.737697] __driver_probe_device+0x78/0x160
[ 3.738746] driver_probe_device+0x1f/0x90
[ 3.739743] __driver_attach+0xc2/0x1b0
[ 3.740671] bus_for_each_dev+0x70/0xc0
[ 3.741601] bus_add_driver+0x10e/0x210
[ 3.742527] driver_register+0x55/0xf0
[ 3.744412] ? 0xffffffffc039a000
[ 3.745207] hv_acpi_init+0x3c/0x1000 [hv_vmbus]
Fixes: 7f163a6fd9 ("drivers:hv: Modify hv_vmbus to search for all MMIO ranges available.")
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/fd8e64ceeecfd1d95ff49021080cf699e88dbbde.1691606267.git.maciej.szmigiero@oracle.com
Hypervisor needs to access input arg, VMBus synic event and
message pages. Mark these pages unencrypted in the SEV-SNP
guest and free them only if they have been marked encrypted
successfully.
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Tianyu Lan <tiala@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/20230818102919.1318039-5-ltykernel@gmail.com
SEV-SNP guests on Hyper-V can run at multiple Virtual Trust
Levels (VTL). During boot, get the VTL at which we're running
using the GET_VP_REGISTERs hypercall, and save the value
for future use. Then during VMBus initialization, set the VTL
with the saved value as required in the VMBus init message.
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Tianyu Lan <tiala@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/20230818102919.1318039-3-ltykernel@gmail.com
This patch is intended as a proof-of-concept for the new SBRM
machinery[1]. For some brief background, the idea behind SBRM is using
the __cleanup__ attribute to automatically unlock locks (or otherwise
release resources) when they go out of scope, similar to C++ style RAII.
This promises some benefits such as making code simpler (particularly
where you have lots of goto fail; type constructs) as well as reducing
the surface area for certain kinds of bugs.
The changes in this patch should not result in any difference in how the
code actually runs (i.e., it's purely an exercise in this new syntax
sugar). In one instance SBRM was not appropriate, so I left that part
alone, but all other locking/unlocking is handled automatically in this
patch.
[1] https://lore.kernel.org/all/20230626125726.GU4253@hirez.programming.kicks-ass.net/
Suggested-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: "Mitchell Levy (Microsoft)" <levymitchell0@gmail.com>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/20230807-sbrm-hyperv-v2-1-9d2ac15305bd@gmail.com
Several places in code for Hyper-V reference the
per-CPU variable hyperv_pcpu_input_arg. Older code uses a multi-line
sequence to reference the variable, and usually includes a cast.
Newer code does a much simpler direct assignment. The latter is
preferable as the complexity of the older code is unnecessary.
Update older code to use the simpler direct assignment.
Signed-off-by: Nischala Yelchuri <niyelchu@linux.microsoft.com>
Link: https://lore.kernel.org/r/1687286438-9421-1-git-send-email-niyelchu@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Currently hv_free_hyperv_page() takes an unsigned long argument, which
is inconsistent with the void * return value from the corresponding
hv_alloc_hyperv_page() function and variants. This creates unnecessary
extra casting.
Change the hv_free_hyperv_page() argument type to void *.
Also remove redundant casts from invocations of
hv_alloc_hyperv_page() and variants.
Signed-off-by: Kameron Carr <kameroncarr@linux.microsoft.com>
Reviewed-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Link: https://lore.kernel.org/r/1687558189-19734-1-git-send-email-kameroncarr@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
These commits
a494aef23d ("PCI: hv: Replace retarget_msi_interrupt_params with hyperv_pcpu_input_arg")
2c6ba42168 ("PCI: hv: Enable PCI pass-thru devices in Confidential VMs")
update the Hyper-V virtual PCI driver to use the hyperv_pcpu_input_arg
because that memory will be correctly marked as decrypted or encrypted
for all VM types (CoCo or normal). But problems ensue when CPUs in the
VM go online or offline after virtual PCI devices have been configured.
When a CPU is brought online, the hyperv_pcpu_input_arg for that CPU is
initialized by hv_cpu_init() running under state CPUHP_AP_ONLINE_DYN.
But this state occurs after state CPUHP_AP_IRQ_AFFINITY_ONLINE, which
may call the virtual PCI driver and fault trying to use the as yet
uninitialized hyperv_pcpu_input_arg. A similar problem occurs in a CoCo
VM if the MMIO read and write hypercalls are used from state
CPUHP_AP_IRQ_AFFINITY_ONLINE.
When a CPU is taken offline, IRQs may be reassigned in state
CPUHP_TEARDOWN_CPU. Again, the virtual PCI driver may fault trying to
use the hyperv_pcpu_input_arg that has already been freed by a
higher state.
Fix the onlining problem by adding state CPUHP_AP_HYPERV_ONLINE
immediately after CPUHP_AP_ONLINE_IDLE (similar to CPUHP_AP_KVM_ONLINE)
and before CPUHP_AP_IRQ_AFFINITY_ONLINE. Use this new state for
Hyper-V initialization so that hyperv_pcpu_input_arg is allocated
early enough.
Fix the offlining problem by not freeing hyperv_pcpu_input_arg when
a CPU goes offline. Retain the allocated memory, and reuse it if
the CPU comes back online later.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Link: https://lore.kernel.org/r/1684862062-51576-1-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
vmbus_wait_for_unload() may be called in the panic path after other
CPUs are stopped. vmbus_wait_for_unload() currently loops through
online CPUs looking for the UNLOAD response message. But the values of
CONFIG_KEXEC_CORE and crash_kexec_post_notifiers affect the path used
to stop the other CPUs, and in one of the paths the stopped CPUs
are removed from cpu_online_mask. This removal happens in both
x86/x64 and arm64 architectures. In such a case, vmbus_wait_for_unload()
only checks the panic'ing CPU, and misses the UNLOAD response message
except when the panic'ing CPU is CPU 0. vmbus_wait_for_unload()
eventually times out, but only after waiting 100 seconds.
Fix this by looping through *present* CPUs in vmbus_wait_for_unload().
The cpu_present_mask is not modified by stopping the other CPUs in the
panic path, nor should it be.
Also, in a CoCo VM the synic_message_page is not allocated in
hv_synic_alloc(), but is set and cleared in hv_synic_enable_regs()
and hv_synic_disable_regs() such that it is set only when the CPU is
online. If not all present CPUs are online when vmbus_wait_for_unload()
is called, the synic_message_page might be NULL. Add a check for this.
Fixes: cd95aad557 ("Drivers: hv: vmbus: handle various crash scenarios")
Cc: stable@vger.kernel.org
Reported-by: John Starks <jostarks@microsoft.com>
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/1684422832-38476-1-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Commit 572086325c ("Drivers: hv: vmbus: Cleanup synic memory free path")
says "Any memory allocations that succeeded will be freed when the caller
cleans up by calling hv_synic_free()", but if the get_zeroed_page() in
hv_synic_alloc() fails, currently hv_synic_free() is not really called
in vmbus_bus_init(), consequently there will be a memory leak, e.g.
hv_context.hv_numa_map is not freed in the error path. Fix this by
updating the goto labels.
Cc: stable@kernel.org
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Fixes: 4df4cb9e99 ("x86/hyperv: Initialize clockevents earlier in CPU onlining")
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20230504224155.10484-1-decui@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAmRHJSgTHHdlaS5saXVA
a2VybmVsLm9yZwAKCRB2FHBfkEGgXjSOCAClsmFmyP320yAB74vQer5cSzxbIpFW
3qt/P3D8zABn0UxjjmD8+LTHuyB+72KANU6qQ9No6zdYs8yaA1vGX8j8UglWWHuj
fmaAD4DuZl+V+fmqDgHukgaPlhakmW0m5tJkR+TW3kCgnyrtvSWpXPoxUAe6CLvj
Kb/SPl6ylHRWlIAEZ51gy0Ipqxjvs5vR/h9CWpTmRMuZvxdWUro2Cm82wJgzXPqq
3eLbAzB29kLFEIIUpba9a/rif1yrWgVFlfpuENFZ+HUYuR78wrPB9evhwuPvhXd2
+f+Wk0IXORAJo8h7aaMMIr6bd4Lyn98GPgmS5YSe92HRIqjBvtYs3Dq8
=F6+n
-----END PGP SIGNATURE-----
Merge tag 'hyperv-next-signed-20230424' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv updates from Wei Liu:
- PCI passthrough for Hyper-V confidential VMs (Michael Kelley)
- Hyper-V VTL mode support (Saurabh Sengar)
- Move panic report initialization code earlier (Long Li)
- Various improvements and bug fixes (Dexuan Cui and Michael Kelley)
* tag 'hyperv-next-signed-20230424' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: (22 commits)
PCI: hv: Replace retarget_msi_interrupt_params with hyperv_pcpu_input_arg
Drivers: hv: move panic report code from vmbus to hv early init code
x86/hyperv: VTL support for Hyper-V
Drivers: hv: Kconfig: Add HYPERV_VTL_MODE
x86/hyperv: Make hv_get_nmi_reason public
x86/hyperv: Add VTL specific structs and hypercalls
x86/init: Make get/set_rtc_noop() public
x86/hyperv: Exclude lazy TLB mode CPUs from enlightened TLB flushes
x86/hyperv: Add callback filter to cpumask_to_vpset()
Drivers: hv: vmbus: Remove the per-CPU post_msg_page
clocksource: hyper-v: make sure Invariant-TSC is used if it is available
PCI: hv: Enable PCI pass-thru devices in Confidential VMs
Drivers: hv: Don't remap addresses that are above shared_gpa_boundary
hv_netvsc: Remove second mapping of send and recv buffers
Drivers: hv: vmbus: Remove second way of mapping ring buffers
Drivers: hv: vmbus: Remove second mapping of VMBus monitor pages
swiotlb: Remove bounce buffer remapping for Hyper-V
Driver: VMBus: Add Devicetree support
dt-bindings: bus: Add Hyper-V VMBus
Drivers: hv: vmbus: Convert acpi_device to more generic platform_device
...
This pull request goes with only a few sysctl moves from the
kernel/sysctl.c file, the rest of the work has been put towards
deprecating two API calls which incur recursion and prevent us
from simplifying the registration process / saving memory per
move. Most of the changes have been soaking on linux-next since
v6.3-rc3.
I've slowed down the kernel/sysctl.c moves due to Matthew Wilcox's
feedback that we should see if we could *save* memory with these
moves instead of incurring more memory. We currently incur more
memory since when we move a syctl from kernel/sysclt.c out to its
own file we end up having to add a new empty sysctl used to register
it. To achieve saving memory we want to allow syctls to be passed
without requiring the end element being empty, and just have our
registration process rely on ARRAY_SIZE(). Without this, supporting
both styles of sysctls would make the sysctl registration pretty
brittle, hard to read and maintain as can be seen from Meng Tang's
efforts to do just this [0]. Fortunately, in order to use ARRAY_SIZE()
for all sysctl registrations also implies doing the work to deprecate
two API calls which use recursion in order to support sysctl
declarations with subdirectories.
And so during this development cycle quite a bit of effort went into
this deprecation effort. I've annotated the following two APIs are
deprecated and in few kernel releases we should be good to remove them:
* register_sysctl_table()
* register_sysctl_paths()
During this merge window we should be able to deprecate and unexport
register_sysctl_paths(), we can probably do that towards the end
of this merge window.
Deprecating register_sysctl_table() will take a bit more time but
this pull request goes with a few example of how to do this.
As it turns out each of the conversions to move away from either of
these two API calls *also* saves memory. And so long term, all these
changes *will* prove to have saved a bit of memory on boot.
The way I see it then is if remove a user of one deprecated call, it
gives us enough savings to move one kernel/sysctl.c out from the
generic arrays as we end up with about the same amount of bytes.
Since deprecating register_sysctl_table() and register_sysctl_paths()
does not require maintainer coordination except the final unexport
you'll see quite a bit of these changes from other pull requests, I've
just kept the stragglers after rc3.
Most of these changes have been soaking on linux-next since around rc3.
[0] https://lkml.kernel.org/r/ZAD+cpbrqlc5vmry@bombadil.infradead.org
-----BEGIN PGP SIGNATURE-----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=0U0W
-----END PGP SIGNATURE-----
Merge tag 'sysctl-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull sysctl updates from Luis Chamberlain:
"This only does a few sysctl moves from the kernel/sysctl.c file, the
rest of the work has been put towards deprecating two API calls which
incur recursion and prevent us from simplifying the registration
process / saving memory per move. Most of the changes have been
soaking on linux-next since v6.3-rc3.
I've slowed down the kernel/sysctl.c moves due to Matthew Wilcox's
feedback that we should see if we could *save* memory with these moves
instead of incurring more memory. We currently incur more memory since
when we move a syctl from kernel/sysclt.c out to its own file we end
up having to add a new empty sysctl used to register it. To achieve
saving memory we want to allow syctls to be passed without requiring
the end element being empty, and just have our registration process
rely on ARRAY_SIZE(). Without this, supporting both styles of sysctls
would make the sysctl registration pretty brittle, hard to read and
maintain as can be seen from Meng Tang's efforts to do just this [0].
Fortunately, in order to use ARRAY_SIZE() for all sysctl registrations
also implies doing the work to deprecate two API calls which use
recursion in order to support sysctl declarations with subdirectories.
And so during this development cycle quite a bit of effort went into
this deprecation effort. I've annotated the following two APIs are
deprecated and in few kernel releases we should be good to remove
them:
- register_sysctl_table()
- register_sysctl_paths()
During this merge window we should be able to deprecate and unexport
register_sysctl_paths(), we can probably do that towards the end of
this merge window.
Deprecating register_sysctl_table() will take a bit more time but this
pull request goes with a few example of how to do this.
As it turns out each of the conversions to move away from either of
these two API calls *also* saves memory. And so long term, all these
changes *will* prove to have saved a bit of memory on boot.
The way I see it then is if remove a user of one deprecated call, it
gives us enough savings to move one kernel/sysctl.c out from the
generic arrays as we end up with about the same amount of bytes.
Since deprecating register_sysctl_table() and register_sysctl_paths()
does not require maintainer coordination except the final unexport
you'll see quite a bit of these changes from other pull requests, I've
just kept the stragglers after rc3"
Link: https://lkml.kernel.org/r/ZAD+cpbrqlc5vmry@bombadil.infradead.org [0]
* tag 'sysctl-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: (29 commits)
fs: fix sysctls.c built
mm: compaction: remove incorrect #ifdef checks
mm: compaction: move compaction sysctl to its own file
mm: memory-failure: Move memory failure sysctls to its own file
arm: simplify two-level sysctl registration for ctl_isa_vars
ia64: simplify one-level sysctl registration for kdump_ctl_table
utsname: simplify one-level sysctl registration for uts_kern_table
ntfs: simplfy one-level sysctl registration for ntfs_sysctls
coda: simplify one-level sysctl registration for coda_table
fs/cachefiles: simplify one-level sysctl registration for cachefiles_sysctls
xfs: simplify two-level sysctl registration for xfs_table
nfs: simplify two-level sysctl registration for nfs_cb_sysctls
nfs: simplify two-level sysctl registration for nfs4_cb_sysctls
lockd: simplify two-level sysctl registration for nlm_sysctls
proc_sysctl: enhance documentation
xen: simplify sysctl registration for balloon
md: simplify sysctl registration
hv: simplify sysctl registration
scsi: simplify sysctl registration with register_sysctl()
csky: simplify alignment sysctl registration
...
Here is the large set of driver core changes for 6.4-rc1.
Once again, a busy development cycle, with lots of changes happening in
the driver core in the quest to be able to move "struct bus" and "struct
class" into read-only memory, a task now complete with these changes.
This will make the future rust interactions with the driver core more
"provably correct" as well as providing more obvious lifetime rules for
all busses and classes in the kernel.
The changes required for this did touch many individual classes and
busses as many callbacks were changed to take const * parameters
instead. All of these changes have been submitted to the various
subsystem maintainers, giving them plenty of time to review, and most of
them actually did so.
Other than those changes, included in here are a small set of other
things:
- kobject logging improvements
- cacheinfo improvements and updates
- obligatory fw_devlink updates and fixes
- documentation updates
- device property cleanups and const * changes
- firwmare loader dependency fixes.
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZEp7Sw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykitQCfamUHpxGcKOAGuLXMotXNakTEsxgAoIquENm5
LEGadNS38k5fs+73UaxV
=7K4B
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the large set of driver core changes for 6.4-rc1.
Once again, a busy development cycle, with lots of changes happening
in the driver core in the quest to be able to move "struct bus" and
"struct class" into read-only memory, a task now complete with these
changes.
This will make the future rust interactions with the driver core more
"provably correct" as well as providing more obvious lifetime rules
for all busses and classes in the kernel.
The changes required for this did touch many individual classes and
busses as many callbacks were changed to take const * parameters
instead. All of these changes have been submitted to the various
subsystem maintainers, giving them plenty of time to review, and most
of them actually did so.
Other than those changes, included in here are a small set of other
things:
- kobject logging improvements
- cacheinfo improvements and updates
- obligatory fw_devlink updates and fixes
- documentation updates
- device property cleanups and const * changes
- firwmare loader dependency fixes.
All of these have been in linux-next for a while with no reported
problems"
* tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (120 commits)
device property: make device_property functions take const device *
driver core: update comments in device_rename()
driver core: Don't require dynamic_debug for initcall_debug probe timing
firmware_loader: rework crypto dependencies
firmware_loader: Strip off \n from customized path
zram: fix up permission for the hot_add sysfs file
cacheinfo: Add use_arch[|_cache]_info field/function
arch_topology: Remove early cacheinfo error message if -ENOENT
cacheinfo: Check cache properties are present in DT
cacheinfo: Check sib_leaf in cache_leaves_are_shared()
cacheinfo: Allow early level detection when DT/ACPI info is missing/broken
cacheinfo: Add arm64 early level initializer implementation
cacheinfo: Add arch specific early level initializer
tty: make tty_class a static const structure
driver core: class: remove struct class_interface * from callbacks
driver core: class: mark the struct class in struct class_interface constant
driver core: class: make class_register() take a const *
driver core: class: mark class_release() as taking a const *
driver core: remove incorrect comment for device_create*
MIPS: vpe-cmp: remove module owner pointer from struct class usage.
...
SEV-SNP vTOM guest on Hyper-V. A vTOM guest basically splits the
address space in two parts: encrypted and unencrypted. The use case
being running unmodified guests on the Hyper-V confidential computing
hypervisor
- Double-buffer messages between the guest and the hardware PSP device
so that no partial buffers are copied back'n'forth and thus potential
message integrity and leak attacks are possible
- Name the return value the sev-guest driver returns when the hw PSP
device hasn't been called, explicitly
- Cleanups
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmRGl8gACgkQEsHwGGHe
VUoEDhAAiw4+2nZR7XUJ7pewlXG7AJJZsVIpzzcF6Gyymn0LFCyMnP7O3snmFqzz
aik0q2LzWrmDQ3Nmmzul0wtdsuW7Nik6BP9oF3WnB911+gGbpXyNWZ8EhOPNzkUR
9D8Sp6f0xmqNE3YuzEpanufiDswgUxi++DRdmIRAs1TTh4bfUFWZcib1pdwoqSmR
oS3UfVwVZ4Ee2Qm1f3n3XQ0FUpsjWeARPExUkLEvd8XeonTP+6aGAdggg9MnPcsl
3zpSmOpuZ6VQbDrHxo3BH9HFuIUOd6S9PO++b9F6WxNPGEMk7fHa7ahOA6HjhgVz
5Da3BN16OS9j64cZsYHMPsBcd+ja1YmvvZGypsY0d6X4d3M1zTPW+XeLbyb+VFBy
SvA7z+JuxtLKVpju65sNiJWw8ZDTSu+eEYNDeeGLvAj3bxtclJjcPdMEPdzxmC5K
eAhmRmiFuVM4nXMAR6cspVTsxvlTHFtd5gdm6RlRnvd7aV77Zl1CLzTy8IHTVpvI
t7XTbtjEjYc0pI6cXXptHEOnBLjXUMPcqgGFgJYEauH6EvrxoWszUZD0tS3Hw80A
K+Rwnc70ubq/PsgZcF4Ayer1j49z1NPfk5D4EA7/ChN6iNhQA8OqHT1UBrHAgqls
2UAwzE2sQZnjDvGZghlOtFIQUIhwue7m93DaRi19EOdKYxVjV6U=
=ZAw9
-----END PGP SIGNATURE-----
Merge tag 'x86_sev_for_v6.4_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 SEV updates from Borislav Petkov:
- Add the necessary glue so that the kernel can run as a confidential
SEV-SNP vTOM guest on Hyper-V. A vTOM guest basically splits the
address space in two parts: encrypted and unencrypted. The use case
being running unmodified guests on the Hyper-V confidential computing
hypervisor
- Double-buffer messages between the guest and the hardware PSP device
so that no partial buffers are copied back'n'forth and thus potential
message integrity and leak attacks are possible
- Name the return value the sev-guest driver returns when the hw PSP
device hasn't been called, explicitly
- Cleanups
* tag 'x86_sev_for_v6.4_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/hyperv: Change vTOM handling to use standard coco mechanisms
init: Call mem_encrypt_init() after Hyper-V hypercall init is done
x86/mm: Handle decryption/re-encryption of bss_decrypted consistently
Drivers: hv: Explicitly request decrypted in vmap_pfn() calls
x86/hyperv: Reorder code to facilitate future work
x86/ioremap: Add hypervisor callback for private MMIO mapping in coco VM
x86/sev: Change snp_guest_issue_request()'s fw_err argument
virt/coco/sev-guest: Double-buffer messages
crypto: ccp: Get rid of __sev_platform_init_locked()'s local function pointer
crypto: ccp - Name -1 return value as SEV_RET_NO_FW_CALL
The panic reporting code was added in commit 81b18bce48
("Drivers: HV: Send one page worth of kmsg dump over Hyper-V during panic")
It was added to the vmbus driver. The panic reporting has no dependence
on vmbus, and can be enabled at an earlier boot time when Hyper-V is
initialized.
This patch moves the panic reporting code out of vmbus. There is no
functionality changes. During moving, also refactored some cleanup
functions into hv_kmsg_dump_unregister().
Signed-off-by: Long Li <longli@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1682030946-6372-1-git-send-email-longli@linuxonhyperv.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
The post_msg_page was introduced in 2014 in
commit b29ef3546a ("Drivers: hv: vmbus: Cleanup hv_post_message()")
Commit 68bb7bfb79 ("X86/Hyper-V: Enable IPI enlightenments") introduced
the hyperv_pcpu_input_arg in 2018, which can be used in hv_post_message().
Remove post_msg_page to simplify the code a little bit.
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Jinank Jain <jinankjain@linux.microsoft.com>
Link: https://lore.kernel.org/r/20230408213441.15472-1-decui@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
For PCI pass-thru devices in a Confidential VM, Hyper-V requires
that PCI config space be accessed via hypercalls. In normal VMs,
config space accesses are trapped to the Hyper-V host and emulated.
But in a confidential VM, the host can't access guest memory to
decode the instruction for emulation, so an explicit hypercall must
be used.
Add functions to make the new MMIO read and MMIO write hypercalls.
Update the PCI config space access functions to use the hypercalls
when such use is indicated by Hyper-V flags. Also, set the flag to
allow the Hyper-V PCI driver to be loaded and used in a Confidential
VM (a.k.a., "Isolation VM"). The driver has previously been hardened
against a malicious Hyper-V host[1].
[1] https://lore.kernel.org/all/20220511223207.3386-2-parri.andrea@gmail.com/
Co-developed-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Link: https://lore.kernel.org/r/1679838727-87310-13-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
With the vTOM bit now treated as a protection flag and not part of
the physical address, avoid remapping physical addresses with vTOM set
since technically such addresses aren't valid. Use ioremap_cache()
instead of memremap() to ensure that the mapping provides decrypted
access, which will correctly set the vTOM bit as a protection flag.
While this change is not required for correctness with the current
implementation of memremap(), for general code hygiene it's better to
not depend on the mapping functions doing something reasonable with
a physical address that is out-of-range.
While here, fix typos in two error messages.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
Link: https://lore.kernel.org/r/1679838727-87310-12-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
With changes to how Hyper-V guest VMs flip memory between private
(encrypted) and shared (decrypted), creating a second kernel virtual
mapping for shared memory is no longer necessary. Everything needed
for the transition to shared is handled by set_memory_decrypted().
As such, remove the code to create and manage the second
mapping for the pre-allocated send and recv buffers. This mapping
is the last user of hv_map_memory()/hv_unmap_memory(), so delete
these functions as well. Finally, hv_map_memory() is the last
user of vmap_pfn() in Hyper-V guest code, so remove the Kconfig
selection of VMAP_PFN.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
Link: https://lore.kernel.org/r/1679838727-87310-11-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
With changes to how Hyper-V guest VMs flip memory between private
(encrypted) and shared (decrypted), it's no longer necessary to
have separate code paths for mapping VMBus ring buffers for
for normal VMs and for Confidential VMs.
As such, remove the code path that uses vmap_pfn(), and set
the protection flags argument to vmap() to account for the
difference between normal and Confidential VMs.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
Link: https://lore.kernel.org/r/1679838727-87310-10-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
With changes to how Hyper-V guest VMs flip memory between private
(encrypted) and shared (decrypted), creating a second kernel virtual
mapping for shared memory is no longer necessary. Everything needed
for the transition to shared is handled by set_memory_decrypted().
As such, remove the code to create and manage the second
mapping for VMBus monitor pages. Because set_memory_decrypted()
and set_memory_encrypted() are no-ops in normal VMs, it's
not even necessary to test for being in a Confidential VM
(a.k.a., "Isolation VM").
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
Link: https://lore.kernel.org/r/1679838727-87310-9-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Merge the following 6 patches from tip/x86/sev, which are taken from
Michael Kelley's series [0]. The rest of Michael's series depend on
them.
x86/hyperv: Change vTOM handling to use standard coco mechanisms
init: Call mem_encrypt_init() after Hyper-V hypercall init is done
x86/mm: Handle decryption/re-encryption of bss_decrypted consistently
Drivers: hv: Explicitly request decrypted in vmap_pfn() calls
x86/hyperv: Reorder code to facilitate future work
x86/ioremap: Add hypervisor callback for private MMIO mapping in coco VM
0: https://lore.kernel.org/linux-hyperv/1679838727-87310-1-git-send-email-mikelley@microsoft.com/
Update the driver to support Devicetree boot as well along with ACPI.
At present the Devicetree parsing only provides the mmio region info
and is not the exact copy of ACPI parsing. This is sufficient to cater
all the current Devicetree usecases for VMBus.
Currently Devicetree is supported only for x86 systems.
Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1679298460-11855-6-git-send-email-ssengar@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
VMBus driver code currently has direct dependency on ACPI and struct
acpi_device. As a staging step toward optionally configuring based on
Devicetree instead of ACPI, use a more generic platform device to reduce
the dependency on ACPI where possible, though the dependency on ACPI
is not completely removed. Also rename the function vmbus_acpi_remove()
to the more generic vmbus_mmio_remove().
Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1679298460-11855-4-git-send-email-ssengar@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
register_sysctl_table() is a deprecated compatibility wrapper.
register_sysctl() can do the directory creation for you so just use
that.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Wei Liu <wei.liu@kernel.org>
Hyper-V guests on AMD SEV-SNP hardware have the option of using the
"virtual Top Of Memory" (vTOM) feature specified by the SEV-SNP
architecture. With vTOM, shared vs. private memory accesses are
controlled by splitting the guest physical address space into two
halves.
vTOM is the dividing line where the uppermost bit of the physical
address space is set; e.g., with 47 bits of guest physical address
space, vTOM is 0x400000000000 (bit 46 is set). Guest physical memory is
accessible at two parallel physical addresses -- one below vTOM and one
above vTOM. Accesses below vTOM are private (encrypted) while accesses
above vTOM are shared (decrypted). In this sense, vTOM is like the
GPA.SHARED bit in Intel TDX.
Support for Hyper-V guests using vTOM was added to the Linux kernel in
two patch sets[1][2]. This support treats the vTOM bit as part of
the physical address. For accessing shared (decrypted) memory, these
patch sets create a second kernel virtual mapping that maps to physical
addresses above vTOM.
A better approach is to treat the vTOM bit as a protection flag, not
as part of the physical address. This new approach is like the approach
for the GPA.SHARED bit in Intel TDX. Rather than creating a second kernel
virtual mapping, the existing mapping is updated using recently added
coco mechanisms.
When memory is changed between private and shared using
set_memory_decrypted() and set_memory_encrypted(), the PTEs for the
existing kernel mapping are changed to add or remove the vTOM bit in the
guest physical address, just as with TDX. The hypercalls to change the
memory status on the host side are made using the existing callback
mechanism. Everything just works, with a minor tweak to map the IO-APIC
to use private accesses.
To accomplish the switch in approach, the following must be done:
* Update Hyper-V initialization to set the cc_mask based on vTOM
and do other coco initialization.
* Update physical_mask so the vTOM bit is no longer treated as part
of the physical address
* Remove CC_VENDOR_HYPERV and merge the associated vTOM functionality
under CC_VENDOR_AMD. Update cc_mkenc() and cc_mkdec() to set/clear
the vTOM bit as a protection flag.
* Code already exists to make hypercalls to inform Hyper-V about pages
changing between shared and private. Update this code to run as a
callback from __set_memory_enc_pgtable().
* Remove the Hyper-V special case from __set_memory_enc_dec()
* Remove the Hyper-V specific call to swiotlb_update_mem_attributes()
since mem_encrypt_init() will now do it.
* Add a Hyper-V specific implementation of the is_private_mmio()
callback that returns true for the IO-APIC and vTPM MMIO addresses
[1] https://lore.kernel.org/all/20211025122116.264793-1-ltykernel@gmail.com/
[2] https://lore.kernel.org/all/20211213071407.314309-1-ltykernel@gmail.com/
[ bp: Touchups. ]
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/1679838727-87310-7-git-send-email-mikelley@microsoft.com
Update vmap_pfn() calls to explicitly request that the mapping
be for decrypted access to the memory. There's no change in
functionality since the PFNs passed to vmap_pfn() are above the
shared_gpa_boundary, implicitly producing a decrypted mapping.
But explicitly requesting "decrypted" allows the code to work
before and after changes that cause vmap_pfn() to mask the
PFNs to being below the shared_gpa_boundary.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
Link: https://lore.kernel.org/r/1679838727-87310-4-git-send-email-mikelley@microsoft.com
struct bus_type should never be modified in a sysfs callback as there is
nothing in the structure to modify, and frankly, the structure is almost
never used in a sysfs callback, so mark it as constant to allow struct
bus_type to be moved to read-only memory.
Cc: "David S. Miller" <davem@davemloft.net>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alexandre Bounine <alex.bou9@gmail.com>
Cc: Alison Schofield <alison.schofield@intel.com>
Cc: Ben Widawsky <bwidawsk@kernel.org>
Cc: Dexuan Cui <decui@microsoft.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Harald Freudenberger <freude@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Hu Haowen <src.res@email.cn>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Stuart Yoder <stuyoder@gmail.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Yanteng Si <siyanteng@loongson.cn>
Acked-by: Ilya Dryomov <idryomov@gmail.com> # rbd
Acked-by: Ira Weiny <ira.weiny@intel.com> # cxl
Reviewed-by: Alex Shi <alexs@kernel.org>
Acked-by: Iwona Winiarska <iwona.winiarska@intel.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> # pci
Acked-by: Wei Liu <wei.liu@kernel.org>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com> # scsi
Link: https://lore.kernel.org/r/20230313182918.1312597-23-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
relid2channel() assumes vmbus channel array to be allocated when called.
However, in cases such as kdump/kexec, not all relids will be reset by the host.
When the second kernel boots and if the guest receives a vmbus interrupt during
vmbus driver initialization before vmbus_connect() is called, before it finishes,
or if it fails, the vmbus interrupt service routine is called which in turn calls
relid2channel() and can cause a null pointer dereference.
Print a warning and error out in relid2channel() for a channel id that's invalid
in the second kernel.
Fixes: 8b6a877c06 ("Drivers: hv: vmbus: Replace the per-CPU channel lists with a global array of channels")
Signed-off-by: Mohammed Gamal <mgamal@redhat.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Link: https://lore.kernel.org/r/20230217204411.212709-1-mgamal@redhat.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Here is the large set of driver core changes for 6.3-rc1.
There's a lot of changes this development cycle, most of the work falls
into two different categories:
- fw_devlink fixes and updates. This has gone through numerous review
cycles and lots of review and testing by lots of different devices.
Hopefully all should be good now, and Saravana will be keeping a
watch for any potential regression on odd embedded systems.
- driver core changes to work to make struct bus_type able to be moved
into read-only memory (i.e. const) The recent work with Rust has
pointed out a number of areas in the driver core where we are
passing around and working with structures that really do not have
to be dynamic at all, and they should be able to be read-only making
things safer overall. This is the contuation of that work (started
last release with kobject changes) in moving struct bus_type to be
constant. We didn't quite make it for this release, but the
remaining patches will be finished up for the release after this
one, but the groundwork has been laid for this effort.
Other than that we have in here:
- debugfs memory leak fixes in some subsystems
- error path cleanups and fixes for some never-able-to-be-hit
codepaths.
- cacheinfo rework and fixes
- Other tiny fixes, full details are in the shortlog
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY/ipdg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynL3gCgwzbcWu0So3piZyLiJKxsVo9C2EsAn3sZ9gN6
6oeFOjD3JDju3cQsfGgd
=Su6W
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the large set of driver core changes for 6.3-rc1.
There's a lot of changes this development cycle, most of the work
falls into two different categories:
- fw_devlink fixes and updates. This has gone through numerous review
cycles and lots of review and testing by lots of different devices.
Hopefully all should be good now, and Saravana will be keeping a
watch for any potential regression on odd embedded systems.
- driver core changes to work to make struct bus_type able to be
moved into read-only memory (i.e. const) The recent work with Rust
has pointed out a number of areas in the driver core where we are
passing around and working with structures that really do not have
to be dynamic at all, and they should be able to be read-only
making things safer overall. This is the contuation of that work
(started last release with kobject changes) in moving struct
bus_type to be constant. We didn't quite make it for this release,
but the remaining patches will be finished up for the release after
this one, but the groundwork has been laid for this effort.
Other than that we have in here:
- debugfs memory leak fixes in some subsystems
- error path cleanups and fixes for some never-able-to-be-hit
codepaths.
- cacheinfo rework and fixes
- Other tiny fixes, full details are in the shortlog
All of these have been in linux-next for a while with no reported
problems"
[ Geert Uytterhoeven points out that that last sentence isn't true, and
that there's a pending report that has a fix that is queued up - Linus ]
* tag 'driver-core-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (124 commits)
debugfs: drop inline constant formatting for ERR_PTR(-ERROR)
OPP: fix error checking in opp_migrate_dentry()
debugfs: update comment of debugfs_rename()
i3c: fix device.h kernel-doc warnings
dma-mapping: no need to pass a bus_type into get_arch_dma_ops()
driver core: class: move EXPORT_SYMBOL_GPL() lines to the correct place
Revert "driver core: add error handling for devtmpfs_create_node()"
Revert "devtmpfs: add debug info to handle()"
Revert "devtmpfs: remove return value of devtmpfs_delete_node()"
driver core: cpu: don't hand-override the uevent bus_type callback.
devtmpfs: remove return value of devtmpfs_delete_node()
devtmpfs: add debug info to handle()
driver core: add error handling for devtmpfs_create_node()
driver core: bus: update my copyright notice
driver core: bus: add bus_get_dev_root() function
driver core: bus: constify bus_unregister()
driver core: bus: constify some internal functions
driver core: bus: constify bus_get_kset()
driver core: bus: constify bus_register/unregister_notifier()
driver core: remove private pointer from struct bus_type
...
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAmPzgDgTHHdlaS5saXVA
a2VybmVsLm9yZwAKCRB2FHBfkEGgXrc7CACfG4SSd8KkWU/y8Q66Irxdau0a3ETD
KL4UNRKGIyKujufgFsme79O6xVSSsCNSay449wk20hqn8lnwbSRi9pUwmLn29hfd
CMFleWIqgwGFfC1do5DRF1vrt1siuG/jVE07mWsEwuY2iHx/es+H7LiQKidhkndZ
DhXRqoi7VYiJv5fRSumpkUJrMZiI96o9Mk09HUksdMwCn3+7RQEqHnlTH5KOozKF
iMroDB72iNw5Na/USZwWL2EDRptENam3lFkPBeDPqNw0SbG4g65JGPR9DSa0Lkbq
AGCJQkdU33mcYQG5MY7R4K1evufpOl/apqLW7h92j45Znr9ok6Vr2c1R
=J1VT
-----END PGP SIGNATURE-----
Merge tag 'hyperv-next-signed-20230220' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv updates from Wei Liu:
- allow Linux to run as the nested root partition for Microsoft
Hypervisor (Jinank Jain and Nuno Das Neves)
- clean up the return type of callback functions (Dawei Li)
* tag 'hyperv-next-signed-20230220' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
x86/hyperv: Fix hv_get/set_register for nested bringup
Drivers: hv: Make remove callback of hyperv driver void returned
Drivers: hv: Enable vmbus driver for nested root partition
x86/hyperv: Add an interface to do nested hypercalls
Drivers: hv: Setup synic registers in case of nested root partition
x86/hyperv: Add support for detecting nested hypervisor
When calling debugfs_lookup() the result must have dput() called on it,
otherwise the memory will leak over time. To make things simpler, just
call debugfs_lookup_and_remove() instead which handles all of the logic
at once.
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Wei Liu <wei.liu@kernel.org>
Cc: Dexuan Cui <decui@microsoft.com>
Fixes: d180e0a1be ("Drivers: hv: Create debugfs file with hyper-v balloon usage information")
Cc: stable <stable@kernel.org>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20230202140918.2289522-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The uevent() callback in struct bus_type should not be modifying the
device that is passed into it, so mark it as a const * and propagate the
function signature changes out into all relevant subsystems that use
this callback.
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230111113018.459199-16-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since commit fc7a6209d5 ("bus: Make remove callback return
void") forces bus_type::remove be void-returned, it doesn't
make much sense for any bus based driver implementing remove
callbalk to return non-void to its caller.
As such, change the remove function for Hyper-V VMBus based
drivers to return void.
Signed-off-by: Dawei Li <set_pte_at@outlook.com>
Link: https://lore.kernel.org/r/TYCP286MB2323A93C55526E4DF239D3ACCAFA9@TYCP286MB2323.JPNP286.PROD.OUTLOOK.COM
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Currently VMBus driver is not initialized for root partition but we need
to enable the VMBus driver for nested root partition. This is required,
so that L2 root can use the VMBus devices.
Signed-off-by: Jinank Jain <jinankjain@linux.microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/c3cdd2cf2bffeba388688640eb61bc182e4c041d.1672639707.git.jinankjain@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Child partitions are free to allocate SynIC message and event page but in
case of root partition it must use the pages allocated by Microsoft
Hypervisor (MSHV). Base address for these pages can be found using
synthetic MSRs exposed by MSHV. There is a slight difference in those MSRs
for nested vs non-nested root partition.
Signed-off-by: Jinank Jain <jinankjain@linux.microsoft.com>
Reviewed-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/cb951fb1ad6814996fc54f4a255c5841a20a151f.1672639707.git.jinankjain@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Detect if Linux is running as a nested hypervisor in the root
partition for Microsoft Hypervisor, using flags provided by MSHV.
Expose a new variable hv_nested that is used later for decisions
specific to the nested use case.
Signed-off-by: Jinank Jain <jinankjain@linux.microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/8e3e7112806e81d2292a66a56fe547162754ecea.1672639707.git.jinankjain@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
