Using LRI for setting the remapping registers allows us to stream l3
remapping information. This is necessary to handle per context remaps as
we'll see implemented in an upcoming patch.
Using the ring also means we don't need to frob the DOP clock gating
bits.
v2: Add comment about lack of worry for concurrent register access
(Daniel)
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
[danvet: Bikeshed the comment a bit by doing a s/XXX/Note - there's
nothing to fix.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Certain HSW SKUs have a second bank of L3. This L3 remapping has a
separate register set, and interrupt from the first "slice". A slice is
simply a term to define some subset of the GPU's l3 cache. This patch
implements both the interrupt handler, and ability to communicate with
userspace about this second slice.
v2: Remove redundant check about non-existent slice.
Change warning about interrupts of unknown slices to WARN_ON_ONCE
Handle the case where we get 2 slice interrupts concurrently, and switch
the tracking of interrupts to be non-destructive (all Ville)
Don't enable/mask the second slice parity interrupt for ivb/vlv (even
though all docs I can find claim it's rsvd) (Ville + Bryan)
Keep BYT excluded from L3 parity
v3: Fix the slice = ffs to be decremented by one (found by Ville). When
I initially did my testing on the series, I was using 1-based slice
counting, so this code was correct. Not sure why my simpler tests that
I've been running since then didn't pick it up sooner.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Now that adjusted_mode.clock no longer contains the pixel_multiplier, we
can kill the get_clock() callback and instead do the clock readout
in get_pipe_config().
Also i9xx_crtc_clock_get() can now extract the frequency of the PCH
DPLL, so use it to populate port_clock accurately for PCH encoders.
For DP in port A the encoder is still responsible for filling in
port_clock. The FDI adjusted_mode.clock extraction is kept in place
for some extra sanity checking, but we no longer need to pretend it's
also the port_clock.
In the encoder get_config() functions fill out adjusted_mode.clock
based on port_clock and other details such as the DP M/N values,
HDMI 12bpc and SDVO pixel_multiplier. For PCH encoders we will then
do an extra sanity check to make sure the dotclock we derived from
the FDI configuratiuon matches the one we derive from port_clock.
DVO doesn't exist on PCH platforms, so it doesn't need to anything
but assign adjusted_mode.clock=port_clock. And DDI is HSW only, so
none of the changes apply there.
v2: Use hdmi_reg color format to detect 12bpc HDMI case
v3: Set adjusted_mode.clock for LVDS too
v4: Rename ironlake_crtc_clock_get to ironlake_pch_clock_get,
eliminate the useless link_freq variable.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
When reserving objects during execbuf, it is possible to come across an
object which will not fit given the current fragmentation of the address
space. We do not have any defragment in drm_mm, so the strategy is to
instead evict everything, and reallocate objects.
With the upcoming addition of multiple VMs, there is no point to evict
everything since doing so is overkill for the specific case mentioned
above.
Recommended-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
[danvet: One additional s/evict_everything/evict_vm/ to update a
comment in the code.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Passing the appropriate crtc to intel_update_watermarks() should help
in avoiding needless work in the future.
v2: Avoid clash with internal 'crtc' variable in some wm functions
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Score and action reveals what all the rings were doing
and why hang was declared. Add idle state so that
we can distinguish between waiting and idle ring.
v2: - add idle as a hangcheck action
- consensed hangcheck status to single line (Chris)
- mark active explicitly when we are making progress (Chris)
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Now when we have mechanism in place to track which context
was guilty of hanging the gpu, it is possible to punish
for bad behaviour.
If context has recently submitted a faulty batchbuffers guilty of
gpu hang and submits another batch which hangs gpu in quick
succession, ban it permanently. If ctx is banned, no more
batchbuffers will be queued for execution.
There is no need for global wedge machinery anymore and
it would be unwise to wedge the whole gpu if we have multiple
hanging batches queued for execution. Instead just ban
the guilty ones and carry on.
v2: Store guilty ban status bool in gpu_error instead of pointers
that might become danling before hang is declared.
v3: Use return value for banned status instead of stashing state
into gpu_error (Chris Wilson)
v4: - rebase on top of fixed hang stats api
- add define for ban period
- rename commit and improve commit msg
v5: - rely context banning instead of wedging the gpu
- beautification and fix for ban calculation (Chris)
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The patch doesn't contain functional change, but is to prepare for
future platform which has different DPIO phy. The additional pipe
parameter will use to select which phy to target for.
v2: Update the commit message and add static for the new function.
(Jani/Ville)
Signed-off-by: Chon Ming Lee <chon.ming.lee@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Notifying the bios lets it enter power saving states.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The bios interface seems messy, and it's hard to tell what the bios
really wants. At first, only add support for DDI based machines (hsw+),
and see how it turns out.
The spec says to notify prior to power down and after power up. It is
unclear whether it makes a difference.
v2:
- squash notification function and callers patches together (Daniel)
- move callers to haswell_crtc_{enable,disable} (Daniel)
- rename notification function (Chris)
v3:
- separate notification function and callers again, as it's not clear
whether the display power state notification is the right thing to do
after all
v4: per Paulo's review:
- drop LVDS
- WARN on unsupported encoder types
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
SWSCI is a driver to bios call interface.
This checks for SWSCI availability and bios requested callbacks, and
filters out any calls that shouldn't happen. This way the callers don't
need to do the checks all over the place.
v2: silence some checkpatch nagging
v3: set PCI_SWSCI bit 0 to trigger interrupt (Mengdong Lin)
v4: remove an extra #define (Jesse)
v5: spec says s/w is responsible for clearing PCI_SWSCI bit 0 too
v6: per Paulo's review and more:
- fix sub-function mask
- add exit parameter
- add define for set panel details call
- return more errors from swsci
- clean up the supported/requested callbacks bit masks mess
- use DSLP for timeout
- fix build for CONFIG_ACPI=n
v7: tiny adjustment of requested vs. supported SBCB callbacks handling (Paulo)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We still maintain code internally that cares about preliminary support.
Leaving the check here doesn't hurt anyone, and should keep things more
in line.
This time around, stick the info in the intel_info structure, and also
change the error from DRM_ERROR->DRM_INFO.
This is a partial revert of:
commit 590e4df8c8
Author: Jesse Barnes <jbarnes@virtuousgeek.org>
Date: Wed May 8 10:45:15 2013 -0700
drm/i915: VLV support is no longer preliminary
Daniel, I'll provide the fix ups for internal too if/when you merge
this (if you want).
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Batchbuffers constructed by userspace can conditionalise their URB
allocations through the use of the MI_SET_PREDICATE command. This
command can read the MI_PREDICATE_RESULT_2 register to see how many
slices are enabled on GT3, and by virtue of the result, scale their
memory allocations to fit enabled memory.
Of course, this only works if the kernel sets the appropriate bit in the
register first.
v2: Better commit subject and message by Chris Wilson.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Credits-to: Yejun Guo <yejun.guo@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Initial parsing of the VBT MIPI block. For now, just store the panel id
if found.
Note: Again there seems to be no documentation for this piece of lore.
The doc situation for byt+ is just a bad joke :(
Signed-off-by: Shobhit Kumar <shobhit.kumar@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
For GPIO NC, CCK, CCU, and GPS CORE.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Shobhit Kumar <shobhit.kumar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
In the execbuf code we don't clean up any vmas which ended up not
getting bound for code simplicity. To make sure that we don't end up
creating multiple vma for the same vm kill the somewhat dangerous
vma_create function and inline it into lookup_or_create.
This is just a safety measure to prevent surprises in the future.
Also update the somewhat confused comment in the execbuf code and
clarify what kind of magic is going on with a new one.
v2: Keep the function separate as requested by Chris. But give it a __
prefix for paranoia and move it tighter together with the other vma
stuff.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ben Widawsky <ben@bwidawsk.net>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
In order to transition more of our code over to using a VMA instead of
an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up
until now, we've only had a VMA when actually binding an object.
The previous patch helped handle the distinction on bound vs. unbound.
This patch will help us catch leaks, and other issues before we actually
shuffle a bunch of stuff around.
This attempts to convert all the execbuf code to speak in vmas. Since
the execbuf code is very self contained it was a nice isolated
conversion.
The meat of the code is about turning eb_objects into eb_vma, and then
wiring up the rest of the code to use vmas instead of obj, vm pairs.
Unfortunately, to do this, we must move the exec_list link from the obj
structure. This list is reused in the eviction code, so we must also
modify the eviction code to make this work.
WARNING: This patch makes an already hotly profiled path slower. The cost is
unavoidable. In reply to this mail, I will attach the extra data.
v2: Release table lock early, and two a 2 phase vma lookup to avoid
having to use a GFP_ATOMIC. (Chris)
v3: s/obj_exec_list/obj_exec_link/
Updates to address
commit 6d2b888569
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Wed Aug 7 18:30:54 2013 +0100
drm/i915: List objects allocated from stolen memory in debugfs
v4: Use obj = vma->obj for neatness in some places (Chris)
need_reloc_mappable() should return false if ppgtt (Chris)
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
[danvet: Split out prep patches. Also remove a FIXME comment which is
now taken care of.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Historically we've run our own driver hotplug handling in our own
work-queue, which then launched the drm core hotplug handling in the
system workqueue. This is important since we flush our own driver
workqueue in the pageflip code while hodling modeset locks, and only
the drm hotplug code grabbed these locks. But with
commit 69787f7da6
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Tue Oct 23 18:23:34 2012 +0000
drm: run the hpd irq event code directly
this was changed and now we could deadlock in our flip handler if
there's a hotplug work blocking the progress of the crucial unpin
works. So this broke the careful deadlock avoidance implemented in
commit b4a98e57fc
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Thu Nov 1 09:26:26 2012 +0000
drm/i915: Flush outstanding unpin tasks before pageflipping
Since the rule thus far has been that work items on our own workqueue
may never grab modeset locks simply restore that rule again.
v2: Add a comment to the declaration of dev_priv->wq to warn readers
about the tricky implications of using it. Suggested by Chris Wilson.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Stuart Abercrombie <sabercrombie@chromium.org>
Reported-by: Stuart Abercrombie <sabercrombie@chromium.org>
References: http://permalink.gmane.org/gmane.comp.freedesktop.xorg.drivers.intel/26239
Cc: stable@vger.kernel.org
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
[danvet: Squash in a comment at the place where we schedule the work.
Requested after-the-fact by Chris on irc since the hpd work isn't the
only place we botch this.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Alex writes:
This is the radeon drm-next request. Big changes include:
- support for dpm on CIK parts
- support for ASPM on CIK parts
- support for berlin GPUs
- major ring handling cleanup
- remove the old 3D blit code for bo moves in favor of CP DMA or sDMA
- lots of bug fixes
[airlied: fix up a bunch of conflicts from drm_order removal]
* 'drm-next-3.12' of git://people.freedesktop.org/~agd5f/linux: (898 commits)
drm/radeon/dpm: make sure dc performance level limits are valid (CI)
drm/radeon/dpm: make sure dc performance level limits are valid (BTC-SI) (v2)
drm/radeon: gcc fixes for extended dpm tables
drm/radeon: gcc fixes for kb/kv dpm
drm/radeon: gcc fixes for ci dpm
drm/radeon: gcc fixes for si dpm
drm/radeon: gcc fixes for ni dpm
drm/radeon: gcc fixes for trinity dpm
drm/radeon: gcc fixes for sumo dpm
drm/radeonn: gcc fixes for rv7xx/eg/btc dpm
drm/radeon: gcc fixes for rv6xx dpm
drm/radeon: gcc fixes for radeon_atombios.c
drm/radeon: enable UVD interrupts on CIK
drm/radeon: fix init ordering for r600+
drm/radeon/dpm: only need to reprogram uvd if uvd pg is enabled
drm/radeon: check the return value of uvd_v1_0_start in uvd_v1_0_init
drm/radeon: split out radeon_uvd_resume from uvd_v4_2_resume
radeon kms: fix uninitialised hotplug work usage in r100_irq_process()
drm/radeon/audio: set up the sads on DCE3.2 asics
drm/radeon: fix handling of variable sized arrays for router objects
...
Conflicts:
drivers/gpu/drm/i915/i915_dma.c
drivers/gpu/drm/i915/i915_gem_dmabuf.c
drivers/gpu/drm/i915/intel_pm.c
drivers/gpu/drm/radeon/cik.c
drivers/gpu/drm/radeon/ni.c
drivers/gpu/drm/radeon/r600.c
Need to get my stuff out the door ;-) Highlights:
- pc8+ support from Paulo
- more vma patches from Ben.
- Kconfig option to enable preliminary support by default (Josh
Triplett)
- Optimized cpu cache flush handling and support for write-through caching
of display planes on Iris (Chris)
- rc6 tuning from Stéphane Marchesin for more stability
- VECS seqno wrap/semaphores fix (Ben)
- a pile of smaller cleanups and improvements all over
Note that I've ditched Ben's execbuf vma conversion for 3.12 since not yet
ready. But there's still other vma conversion stuff in here.
* tag 'drm-intel-next-2013-08-23' of git://people.freedesktop.org/~danvet/drm-intel: (62 commits)
drm/i915: Print seqnos as unsigned in debugfs
drm/i915: Fix context size calculation on SNB/IVB/VLV
drm/i915: Use POSTING_READ in lcpll code
drm/i915: enable Package C8+ by default
drm/i915: add i915.pc8_timeout function
drm/i915: add i915_pc8_status debugfs file
drm/i915: allow package C8+ states on Haswell (disabled)
drm/i915: fix SDEIMR assertion when disabling LCPLL
drm/i915: grab force_wake when restoring LCPLL
drm/i915: drop WaMbcDriverBootEnable workaround
drm/i915: Cleaning up the relocate entry function
drm/i915: merge HSW and SNB PM irq handlers
drm/i915: fix how we mask PMIMR when adding work to the queue
drm/i915: don't queue PM events we won't process
drm/i915: don't disable/reenable IVB error interrupts when not needed
drm/i915: add dev_priv->pm_irq_mask
drm/i915: don't update GEN6_PMIMR when it's not needed
drm/i915: wrap GEN6_PMIMR changes
drm/i915: wrap GTIMR changes
drm/i915: add the FCLK case to intel_ddi_get_cdclk_freq
...
This lets drivers see the flags requested by the application
[airlied: fixup for rcar/imx/msm]
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@gmail.com>
We currently only enter PC8+ after all its required conditions are
met, there's no rendering, and we stay like that for at least 5
seconds.
I chose "5 seconds" because this value is conservative and won't make
us enter/leave PC8+ thousands of times after the screen is off: some
desktop environments have applications that wake up and do rendering
every 1-3 seconds, even when the screen is off and the machine is
completely idle.
But when I was testing my PC8+ patches I set the default value to
100ms so I could use the bad-behaving desktop environments to
stress-test my patches. I also thought it would be a good idea to ask
our power management team to test different values, but I'm pretty
sure they would ask me for an easy way to change the timeout. So to
help these 2 cases I decided to create an option that would make it
easier to change the default value. I also expect people making
specific products that use our driver could try to find the perfect
timeout for them.
Anyway, fixing the bad-behaving applications will always lead to
better power savings than just changing the timeout value: you need to
stop waking the Kernel, not quickly put it back to sleep again after
you wake it for nothing. Bad sleep leads to bad mood!
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This patch allows PC8+ states on Haswell. These states can only be
reached when all the display outputs are disabled, and they allow some
more power savings.
The fact that the graphics device is allowing PC8+ doesn't mean that
the machine will actually enter PC8+: all the other devices also need
to allow PC8+.
For now this option is disabled by default. You need i915.allow_pc8=1
if you want it.
This patch adds a big comment inside i915_drv.h explaining how it
works and how it tracks things. Read it.
v2: (this is not really v2, many previous versions were already sent,
but they had different names)
- Use the new functions to enable/disable GTIMR and GEN6_PMIMR
- Rename almost all variables and functions to names suggested by
Chris
- More WARNs on the IRQ handling code
- Also disable PC8 when there's GPU work to do (thanks to Ben for
the help on this), so apps can run caster
- Enable PC8 on a delayed work function that is delayed for 5
seconds. This makes sure we only enable PC8+ if we're really
idle
- Make sure we're not in PC8+ when suspending
v3: - WARN if IRQs are disabled on __wait_seqno
- Replace some DRM_ERRORs with WARNs
- Fix calls to restore GT and PM interrupts
- Use intel_mark_busy instead of intel_ring_advance to disable PC8
v4: - Use the force_wake, Luke!
v5: - Remove the "IIR is not zero" WARNs
- Move the force_wake chunk to its own patch
- Only restore what's missing from RC6, not everything
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Just like irq_mask and gt_irq_mask, use it to track the status of
GEN6_PMIMR so we don't need to read it again every time we call
snb_update_pm_irq.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This define hasn't been used since:
commit cfdf1fa23f
Author: Kristian Høgsberg <krh@bitplanet.net>
Date: Wed Dec 16 15:16:16 2009 -0500
drm/i915: Implement IS_* macros using static tables
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The code using this was removed in:
commit 88f23b8fa3
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Sun Dec 5 15:08:31 2010 +0000
drm/i915: Avoid using PIPE_CONTROL on Ironlake
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This define hasn't been used since:
commit 652c393a33
Author: Jesse Barnes <jbarnes@virtuousgeek.org>
Date: Mon Aug 17 13:31:43 2009 -0700
drm/i915: add dynamic clock frequency control
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
In the new execbuf code we want to track buffers using the vmas even
before they're all properly mapped. Which means that bind_to_vm needs
to deal with buffers which have preallocated vmas which aren't yet
bound.
This patch implements this prep work and adjusts our WARN/BUG checks.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
[danvet: Split out from Ben's big execbuf patch. Also move one BUG
back to its original place to deflate the diff a notch.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The execbuf wants to do relocations usings vmas, so we need a
vma->exec_list. The eviction code also uses the old obj execbuf list
for it's own book-keeping, but would really prefer to deal in vmas
only. So switch it over to the new list.
Again this is just a prep patch for the big execbuf vma conversion.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
[danvet: Split out from Ben's big execbuf vma patch.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
To convert the execbuf code over to use vmas natively we need to
shuffle the exec_list a bit. This patch here just prepares things with
the debugfs code, which also uses the old exec_list list_head, newly
called obj_exec_link.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
[danvet: Split out from Ben's big patch.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The machines that fall in this category are the SDVs that have a PCI
ID starting with 0x0C. These are very early pre-production machines
and may not fully work. Other Haswell SDVs have PCI IDs that match the
real Haswell machines and we expect them to work better.
Even though they have problems, they still mostly work so I don't see
a reason to refuse loading our driver. But I do see a reason to reject
bug reports from these machines, so the message should help the bug
triagers.
As far as I know, we don't implement some workarounds that are
specific to these machines and suspend/resume may not work on most of
them, but besides this, they may work.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=61508
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Haswell GT3e has the unique feature of supporting Write-Through cacheing
of objects within the eLLC/LLC. The purpose of this is to enable the display
plane to remain coherent whilst objects lie resident in the eLLC/LLC - so
that we, in theory, get the best of both worlds, perfect display and fast
access.
However, we still need to be careful as the CPU does not see the WT when
accessing the cache. In particular, this means that we need to flush the
cache lines after writing to an object through the CPU, and on
transitioning from a cached state to WT.
v2: Actually do the clflush on transition to WT, nagging by Ville.
v3: Flush the CPU cache after writes into WT objects.
v4: Rease onto LLC updates and report WT as "uncached" for
get_cache_level_ioctl to remain symmetric with set_cache_level_ioctl.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Now that we skip clflushes more often, return a boolean indicating
whether the clflush was actually performed, and only if it was do the
chipset flush. (Though on most of the architectures where the clflush will
be skipped, the chipset flush is a no-op!)
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel writes:
New pile of stuff for -next:
- Cleanup of the old crtc helper callbacks, all encoders are now converted
to the i915 modeset infrastructure.
- Massive amount of wm patches from Ville for ilk, snb, ivb, hsw, this is
prep work to eventually get things going for nuclear pageflips where we
need to adjust watermarks on the fly.
- More vm/vma patches from Ben. This refactoring isn't yet fully rolled
out, we miss the execbuf conversion and some of the low-level
bind/unbind support code.
- Convert our hdmi infoframe code to use the new common helper functions
(Damien). This contains some bugfixes for the common infoframe helpers.
- Some cruft removal from Damien.
- Various smaller bits&pieces all over, as usual.
* tag 'drm-intel-next-2013-08-09' of git://people.freedesktop.org/~danvet/drm-intel: (105 commits)
drm/i915: Fix FB WM for HSW
drm/i915: expose HDMI connectors on port C on BYT
drm/i915: fix a limit check in hsw_compute_wm_results()
drm/i915: unbreak i915_gem_object_ggtt_unbind()
drm/i915: Make intel_set_mode() static
drm/i915: Remove intel_modeset_disable()
drm/i915: Make intel_encoder_dpms() static
drm/i915: Make i915_hangcheck_elapsed() static
drm/i915: Fix #endif comment
drm/i915: Remove i915_gem_object_check_coherency()
drm/i915: Remove stale prototypes
drm/i915: List objects allocated from stolen memory in debugfs
drm/i915: Always call intel_update_sprite_watermarks() when disabling a plane
drm/i915: Pass plane and crtc to intel_update_sprite_watermarks
drm/i915: Don't try to disable plane if it's already disabled
drm/i915: Pass crtc to our update/disable_plane hooks
drm/i915: Split plane watermark parameters into a separate struct
drm/i915: Pull some watermarks state into a separate structure
drm/i915: Calculate max watermark levels for ILK+
drm/i915: Rename hsw_lp_wm_result to intel_wm_level
...
As mentioned in the previous commit, reads and writes from both the CPU
and GPU go through the LLC. This gives us coherency between the CPU and
GPU irrespective of the attribute settings either device sets. We can
use to avoid having to clflush even uncached memory.
Except for the scanout.
The scanout resides within another functional block that does not use
the LLC but reads directly from main memory. So in order to maintain
coherency with the scanout, writes to uncached memory must be flushed.
In order to optimize writes elsewhere, we start tracking whether an
framebuffer is attached to an object.
v2: Use pin_display tracking rather than fb_count (to ensure we flush
cursors as well etc) and only force the clflush along explicit writes to
the scanout paths (i.e. pin_to_display_plane and pwrite into scanout).
v3: Force the flush after hitting the slowpath in pwrite, as after
dropping the lock the object's cache domain may be invalidated. (Ville)
Based on a patch by Ville Syrjälä.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The display engine has unique coherency rules such that it requires
special handling to ensure that all writes to cursors, scanouts and
sprites are clflushed. This patch introduces the infrastructure to
simply track when an object is being accessed by the display engine.
v2: Explain the is_pin_display() magic as the sources for obj->pin_count
and their individual rules is not obvious. (Ville)
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This code was dead since:
commit 432e58edc9
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Thu Nov 25 19:32:06 2010 +0000
drm/i915: Avoid allocation for execbuffer object list
so just put it to rest for good.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We're going to want to know the crtc in the watermark code to avoid
doing more work than we have to. We should also pass the plane we're
disabling so that we know where to stick our watermark parameters
without having to go look the plane up.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Let's call hsw_lp_wm_result intel_wm_level from now on and move it to
i915_drv.h for later use.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
formerly: "drm/i915: Create VMAs (part 4) - Error capture"
Since the active/inactive lists are per VM, we need to modify the error
capture code to be aware of this, and also extend it to capture the
buffers from all the VMs. For now all the code assumes only 1 VM, but it
will become more generic over the next few patches.
NOTE: If the number of VMs in a real world system grows significantly
we'll have to focus on only capturing the guilty VM, or else it's likely
there won't be enough space for error capture.
v2: Squashed in the "part 6" which had dependencies on the mm_list
change. Since I've moved the mm_list change to an earlier point in the
series, we were able to accomplish it here and now.
v3: Rebased over new error capture
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
formerly: "drm/i915: Create VMAs (part 5) - move mm_list"
The mm_list is used for the active/inactive LRUs. Since those LRUs are
per address space, the link should be per VMx .
Because we'll only ever have 1 VMA before this point, it's not incorrect
to defer this change until this point in the patch series, and doing it
here makes the change much easier to understand.
Shamelessly manipulated out of Daniel:
"active/inactive stuff is used by eviction when we run out of address
space, so needs to be per-vma and per-address space. Bound/unbound otoh
is used by the shrinker which only cares about the amount of memory used
and not one bit about in which address space this memory is all used in.
Of course to actual kick out an object we need to unbind it from every
address space, but for that we have the per-object list of vmas."
v2: only bump GGTT LRU in i915_gem_object_set_to_gtt_domain (Chris)
v3: Moved earlier in the series
v4: Add dropped message from v3
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
[danvet: Frob patch to apply and use vma->node.size directly as
discused with Ben. Also drop a needles BUG_ON before move_to_inactive,
the function itself has the same check.]
[danvet 2nd: Rebase on top of the lost "drm/i915: Cleanup more of VMA
in destroy", specifically unlink the vma from the mm_list in
vma_unbind (to keep it symmetric with bind_to_vm) instead of
vma_destroy.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We're going to use the 1/2 vs. 5/6 split option already on IVB so the
HSW name is not proper. Just give it an intel_ prefix and move it to
i915_drv.h so that we can use it there later.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Eviction code, like the rest of the converted code needs to be aware of
the address space for which it is evicting (or the everything case, all
addresses). With the updated bind/unbind interfaces of the last patch,
we can now safely move the eviction code over.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
As alluded to in several patches, and it will be reiterated later... A
VMA is an abstraction for a GEM BO bound into an address space.
Therefore it stands to reason, that the existing bind, and unbind are
the ones which will be the most impacted. This patch implements this,
and updates all callers which weren't already updated in the series
(because it was too messy).
This patch represents the bulk of an earlier, larger patch. I've pulled
out a bunch of things by the request of Daniel. The history is preserved
for posterity with the email convention of ">" One big change from the
original patch aside from a bunch of cropping is I've created an
i915_vma_unbind() function. That is because we always have the VMA
anyway, and doing an extra lookup is useful. There is a caveat, we
retain an i915_gem_object_ggtt_unbind, for the global cases which might
not talk in VMAs.
> drm/i915: plumb VM into object operations
>
> This patch was formerly known as:
> "drm/i915: Create VMAs (part 3) - plumbing"
>
> This patch adds a VM argument, bind/unbind, and the object
> offset/size/color getters/setters. It preserves the old ggtt helper
> functions because things still need, and will continue to need them.
>
> Some code will still need to be ported over after this.
>
> v2: Fix purge to pick an object and unbind all vmas
> This was doable because of the global bound list change.
>
> v3: With the commit to actually pin/unpin pages in place, there is no
> longer a need to check if unbind succeeded before calling put_pages().
> Make put_pages only BUG() after checking pin count.
>
> v4: Rebased on top of the new hangcheck work by Mika
> plumbed eb_destroy also
> Many checkpatch related fixes
>
> v5: Very large rebase
>
> v6:
> Change BUG_ON to WARN_ON (Daniel)
> Rename vm to ggtt in preallocate stolen, since it is always ggtt when
> dealing with stolen memory. (Daniel)
> list_for_each will short-circuit already (Daniel)
> remove superflous space (Daniel)
> Use per object list of vmas (Daniel)
> Make obj_bound_any() use obj_bound for each vm (Ben)
> s/bind_to_gtt/bind_to_vm/ (Ben)
>
> Fixed up the inactive shrinker. As Daniel noticed the code could
> potentially count the same object multiple times. While it's not
> possible in the current case, since 1 object can only ever be bound into
> 1 address space thus far - we may as well try to get something more
> future proof in place now. With a prep patch before this to switch over
> to using the bound list + inactive check, we're now able to carry that
> forward for every address space an object is bound into.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
[danvet: Rebase on top of the loss of "drm/i915: Cleanup more of VMA
in destroy".]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Neat that QA (and Ben) keeps on humming along while I'm on vacation, so
you already get the next feature pull request:
- proper eLLC support for HSW from Ben
- more interrupt refactoring
- add w/a tags where we implement them already (Damien)
- hangcheck fixes (Chris) + hangcheck stats (Mika)
- flesh out the new vm structs for ppgtt and ggtt (Ben)
- PSR for Haswell, still disabled by default (Rodrigo et al.)
- pc8+ refclock sequence code from Paulo
- more interrupt refactoring from Paulo, unifying ilk/snb with the ivb/hsw
interrupt code
- full solution for the Haswell concurrent reg access issues (Chris)
- fix racy object accounting, used by some new leak tests
- fix sync polarity settings on ch7xxx dvo encoder
- random bits&pieces, little fixes and better debug output all over
[airlied: fix conflict with drm_mm cleanups]
* tag 'drm-intel-next-2013-07-26-fixed' of git://people.freedesktop.org/~danvet/drm-intel: (289 commits)
drm/i915: Do not dereference NULL crtc or fb until after checking
drm/i915: fix pnv display core clock readout out
drm/i915: Replace open-coded offset_in_page()
drm/i915: Retry DP aux_ch communications with a different clock after failure
drm/i915: Add messages useful for HPD storm detection debugging (v2)
drm/i915: dvo_ch7xxx: fix vsync polarity setting
drm/i915: fix the racy object accounting
drm/i915: Convert the register access tracepoint to be conditional
drm/i915: Squash gen lookup through multiple indirections inside GT access
drm/i915: Use the common register access functions for NOTRACE variants
drm/i915: Use a private interface for register access within GT
drm/i915: Colocate all GT access routines in the same file
drm/i915: fix reference counting in i915_gem_create
drm/i915: Use Graphics Base of Stolen Memory on all gen3+
drm/i915: disable stolen mem for OVERLAY_NEEDS_PHYSICAL
drm/i915: add functions to disable and restore LCPLL
drm/i915: disable CLKOUT_DP when it's not needed
drm/i915: extend lpt_enable_clkout_dp
drm/i915: fix up error cleanup in i915_gem_object_bind_to_gtt
drm/i915: Add some debug breadcrumbs to connector detection
...
Because, there is no reason for it not to be const.
v1: original
v2: fix compile break in vmwgfx, and couple related cleanups suggested
by Ville Syrjälä
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
All the gem based kms drivers really want the same function to
destroy a dumb framebuffer backing storage object.
So give it to them and roll it out in all drivers.
This still leaves the option open for kms drivers which don't use GEM
for backing storage, but it does decently simplify matters for gem
drivers.
Acked-by: Inki Dae <inki.dae@samsung.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Intel Graphics Development <intel-gfx@lists.freedesktop.org>
Cc: Ben Skeggs <skeggsb@gmail.com>
Reviwed-by: Rob Clark <robdclark@gmail.com>
Cc: Alex Deucher <alexdeucher@gmail.com>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
MLC_LLC was never validated for Sandybridge and was superseded by a new
level of cacheing for the GPU in Ivybridge. Update our names to be
consistent with usage, and in the process stop setting the unwanted bit
on Sandybridge.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
[danvet: s/BUG/WARN_ON(1) bikeshed.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Rather than having to read the latency values out every time, just
store them in dev_priv.
On ILK and IVB there is a difference between some of the latency
values for different planes, so store the latency values for each
plane type separately, and apply the necesary fixups during init.
v2: Fix some checkpatch complaints
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
To verbalize it, one can say, "pin an object into the given address
space." The semantics of pinning remain the same otherwise.
Certain objects will always have to be bound into the global GTT.
Therefore, global GTT is a special case, and keep a special interface
around for it (i915_gem_obj_ggtt_pin).
v2: s/i915_gem_ggtt_pin/i915_gem_obj_ggtt_pin
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Earlier in the conversion sequence we attempted to quickly wedge in the
transitional interface as static inlines.
Now that we're sure these interfaces are sane, for easier debug and to
decrease code size (since many of these functions may be called quite a
bit), make them real functions
While at it, kill off the set_color interface. We'll always have the
VMA, or easily get to it.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
For calculating watermarks we want to know whether sprites are
scaled. Pass that information to update_sprite_watermarks() so that
eventually we may do some watermark pre-computing.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Some of our macros we trying to convert from an drm_device to a
drm_i915_private and then use the pointer inline. This is not only
cumbersome but prone to error. Replacing it with a typesafe function
should help catch those errors in future.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
[danvet: Squash in fixup to correctly order static vs. inline
qualifiers, static comes first. Also fix up another offender.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Almost invariably the reason why FBC cannot be turned on is the same
every time (disabled via parameter, too many pipes, pipe too large etc)
as modesetting and framebuffer configuration changes less frequently
than trying to enable FBC.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Upon some code refactoring, a hunk was missed. This was fixed for
next, but missed the current trees, and hasn't yet been merged by Dave
Airlie. It is fixed in:
commit 907b28c56e
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Fri Jul 19 20:36:52 2013 +0100
drm/i915: Colocate all GT access routines in the same file
It is introduced by:
commit 181d1b9e31
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Sun Jul 21 13:16:24 2013 +0200
drm/i915: fix up gt init sequence fallout
Reported-by: Dave Jones <davej@redhat.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Just use a spinlock to protect them.
v2: Rebase onto the new object create refcount fix patch.
v3: Don't kill dev_priv->mm.object_memory as requested by Chris and
hence just use a spinlock instead of atomic_t.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=67287
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Detangle the confusion that NOTRACE variants of the register read/write
routines were directly using the raw register access. We need for those
routines to reuse the common code for serializing register access and
ensuring the correct register power states. This is only possible now
that the only routines that required raw access use their own API.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The GT functions for enabling register access also need to occasionally
write to and read from registers. To avoid the potential recursion as we
modify the public interface to be stricter, introduce a private register
access API for the GT functions.
v2: Rebase
v3: Rebase onto uncore
v4: Use raw interfaces consistently so that we only use the low-level
readN functions from a single location.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Currently, the register access code is split between i915_drv.c and
intel_pm.c. It only bares a superficial resemblance to the reset of the
powermanagement code, so move it all into its own file. This is to ease
further patches to enforce serialised register access.
v2: Scan for random abuse of I915_WRITE_NOTRACE
v3: Take the opportunity to rename the GT functions as uncore. Uncore is
the term used by the hardware design (and bspec) for all functions
outside of the GPU (and CPU) cores in what is also known as the System
Agent.
v4: Rebase onto SNB rc6 fixes
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
[danvet: Wrestle patch into applying and inline
intel_uncore_early_sanitize (plus move the old comment to the new
function). Also keep the _santize postfix for intel_uncore_sanitize.]
[danvet: Squash in fixup spotted by Chris on irc: We need to call
intel_pm_init before intel_uncore_sanitize since the later will call
cancel_work on the delayed rps setup work the former initializes.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This backmerges Linus' merge commit of the latest drm-fixes pull:
commit 549f3a1218
Merge: 42577ca058ca4a
Author: Linus Torvalds <torvalds@linux-foundation.org>
Date: Tue Jul 23 15:47:08 2013 -0700
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
We've accrued a few too many conflicts, but the real reason is that I
want to merge the 100% solution for Haswell concurrent registers
writes into drm-intel-next. But that depends upon the 90% bandaid
merged into -fixes:
commit a7cd1b8fea
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Fri Jul 19 20:36:51 2013 +0100
drm/i915: Serialize almost all register access
Also, we can roll up on accrued conflicts.
Usually I'd backmerge a tagged -rc, but I want to get this done before
heading off to vacations next week ;-)
Conflicts:
drivers/gpu/drm/i915/i915_dma.c
drivers/gpu/drm/i915/i915_gem.c
v2: For added hilarity we have a init sequence conflict around the
gt_lock, so need to move that one, too. Spotted by Jani Nikula.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The regression fix for gen6+ rps fallout
commit 7dcd2677ea
Author: Konstantin Khlebnikov <khlebnikov@openvz.org>
Date: Wed Jul 17 10:22:58 2013 +0400
drm/i915: fix long-standing SNB regression in power consumption after resume
unintentionally also changed the init sequence ordering between
gt_init and gt_reset - we need to reset BIOS damage like leftover
forcewake references before we run our own code. Otherwise we can get
nasty dmesg noise like
[drm:__gen6_gt_force_wake_mt_get] *ERROR* Timed out waiting for forcewake old ack to clear.
again. Since _reset suggests that we first need to have stuff
initialized (which isn't the case here) call it sanitze instead.
While at it also block out the rps disable introduced by the above
commit on ilk: We don't have any knowledge of ilk rps being broken in
similar ways. And the disable functions uses the default hw state
which is only read out when we're enabling rps. So essentially we've
been writing random grabage into that register.
Reported-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: stable@vger.kernel.org
Tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=47941
BugLink: https://bugs.launchpad.net/bugs/1163720
BugLink: https://bugs.launchpad.net/bugs/1162026
Some machines suffer from non-functional backlight controls if
BLM_PCH_PWM_ENABLE is set, so provide a quirk to avoid doing so.
Apply this quirk to Dell XPS 13 models.
Tested-by: Eric Griffith <EGriffith92@gmail.com>
Tested-by: Kent Baxley <kent.baxley@canonical.com>
Cc: <stable@vger.kernel.org> # v3.8+
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
prefault is stll enabled by default which prevent most of pwrite/pread/reloc
from running slow path, in order to verify these slow pathes, prefault need
to be disabled.
Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com>
[danvet: Make checkpatch happy and bikeshed the module option help
text a bit.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Highlights:
- follow-up refactoring after the shared dpll rework that landed in 3.11
- oddball prep cleanups from Ben for ppgtt
- encoder->get_config state tracking infrastructure from Jesse
- used by the experimental fastboot support from Jesse (disabled by
default)
- make the error state file official and add it to our sysfs interface
(Mika)
- drm_mm prep changes from Ben, prepares to embedd the drm_mm_node (which
will be used by the vma rework later on)
- interrupt handling rework, follow up cleanups to the VECS enabling, hpd
storm handling and fifo underrun reporting.
- Big pile of smaller cleanups, code improvements and related stuff.
* tag 'drm-intel-next-2013-07-12' of git://people.freedesktop.org/~danvet/drm-intel: (72 commits)
drm/i915: clear DPLL reg when disabling i9xx dplls
drm/i915: Fix up cpt pixel multiplier enable sequence
drm/i915: clean up vlv ->pre_pll_enable and pll enable sequence
drm/i915: move error state to own compilation unit
drm/i915: Don't attempt to read an unitialized stack value
drm/i915: Use for_each_pipe() when possible
drm/i915: don't enable PM_VEBOX_CS_ERROR_INTERRUPT
drm/i915: unify ring irq refcounts (again)
drm/i915: kill dev_priv->rps.lock
drm/i915: queue work outside spinlock in hsw_pm_irq_handler
drm/i915: streamline hsw_pm_irq_handler
drm/i915: irq handlers don't need interrupt-safe spinlocks
drm/i915: kill lpt pch transcoder->crtc mapping code for fifo underruns
drm/i915: improve GEN7_ERR_INT clearing for fifo underrun reporting
drm/i915: improve SERR_INT clearing for fifo underrun reporting
drm/i915: extract ibx_display_interrupt_update
drm/i915: remove unused members from drm_i915_private
drm/i915: don't frob mm.suspended when not using ums
drm/i915: Fix VLV DP RBR/HDMI/DAC PLL LPF coefficients
drm/i915: WARN if the bios reserved range is bigger than stolen size
...
Conflicts:
drivers/gpu/drm/i915/i915_gem.c
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)
iQEcBAABAgAGBQJR0K2gAAoJEHm+PkMAQRiGWsEH+gMZSN1qRm34hZ82q1Tx7HvL
Eb/Gsl3Qw/7G2TlTqgjBUs36IdqV9O2cui/aa3/TfXvdvrx+0GlhRkEwQPc+ygcO
Mvoyoke4tT4+4jVFdCg1J8avREsa28/6oaHs0ZZxuVmJBBLTJH7aXaNsGn6eU1q9
9+p798MQis6naIiPC63somlZcCIiBhsuWCPWpEfLMn8G1HWAFTM3xXIbNBqe/brS
bmIOfhomlIZ5dcdaXGvjtP3+KJhkNDwhkPC4tVYu8JqqgSlrE+a+EGyEuuGqKk10
U+swiqyuD31uBI9ga54u/2FzSqDiAu6YOcMXevjo/m3g9XLdYbYLvN+nvN8alCQ=
=Ob6Z
-----END PGP SIGNATURE-----
Merge tag 'v3.10' into drm-intel-fixes
Backmerge Linux 3.10 to get at
commit 19b2dbde57
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Wed Jun 12 10:15:12 2013 +0100
drm/i915: Restore fences after resume and GPU resets
That commit is not in my current -fixes pile since that's based on my
-next queue for 3.11. And the above mentioned fix was merged really
late into 3.10 (and blew up, bad me) so was on a diverging branch.
Option B would have been to rebase my current pile of fixes onto
Dave's drm-fixes branch. But since some of the patches here are a bit
tricky I've decided not to void all the testing by moving over the
entire merge window.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
v2: prefer seq_puts to seq_printf detected by Paulo Zanoni.
v3: PSR is disabled by default. Without userspace ready it
will cause regression for kde and xdm users
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Reviewed-by: Shobhit Kumar <shobhit.kumar@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
v2: Prefer seq_puts to seq_printf by Paulo Zanoni.
v3: small changes like avoiding calling dp_to_dig_port twice as noticed by
Paulo Zanoni.
v4: Avoiding reading non-existent registers - noticed by Paulo
on first psr debugfs patch.
v5: Accepting more suggestions from Paulo:
* check sw interlace flag instead of i915_read
* introduce PSR_S3D_ENABLED to avoid forgeting it whenever added.
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Shobhit Kumar <shobhit.kumar@intel.com>
[danvet: Fix up debugfs output (spotted by Paulo) and rip out the
power well check since we really can't do that in a race-free manner,
so it's bogus.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Formerly: "drm/i915: Create VMAs (part 1)"
In a previous patch, the notion of a VM was introduced. A VMA describes
an area of part of the VM address space. A VMA is similar to the concept
in the linux mm. However, instead of representing regular memory, a VMA
is backed by a GEM BO. There may be many VMAs for a given object, one
for each VM the object is to be used in. This may occur through flink,
dma-buf, or a number of other transient states.
Currently the code depends on only 1 VMA per object, for the global GTT
(and aliasing PPGTT). The following patches will address this and make
the rest of the infrastructure more suited
v2: s/i915_obj/i915_gem_obj (Chris)
v3: Only move an object to the now global unbound list if there are no
more VMAs for the object which are bound into a VM (ie. the list is
empty).
v4: killed obj->gtt_space
some reworks due to rebase
v5: Free vma on error path (Imre)
v6: Another missed vma free in i915_gem_object_bind_to_gtt error path
(Imre)
Fixed vma freeing in stolen preallocation (Imre)
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Imre Deak <imre.deak@intel.com>
[danvet: Squash in fixup from Ben to not deref a non-existing vma in
set_cache_level, reported by Chris.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Shamelessly manipulated out of Daniel :-)
"When moving the lists around explain that the active/inactive stuff is
used by eviction when we run out of address space, so needs to be
per-vma and per-address space. Bound/unbound otoh is used by the
shrinker which only cares about the amount of memory used and not one
bit about in which address space this memory is all used in. Of course
to actual kick out an object we need to unbind it from every address
space, but for that we have the per-object list of vmas."
v2: Leave the bound list as a global one. (Chris, indirectly)
v3: Rebased with no i915_gtt_vm. In most places I added a new *vm local,
since it will eventually be replaces by a vm argument.
Put comment back inline, since it no longer makes sense to do otherwise.
v4: Rebased on hangcheck/error state movement
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
After we plumb our code to support multiple address spaces (VMs), there
are a few situations where we want to be able to traverse the list of
all address spaces in the system. Cases like eviction, or error state
collection are obvious example.
v2: Delete the global link instead of the list head. While this in and
of itself shouldn't be really be a problem, doing this allows us to WARN
on an non-empty list, which is a problem. (Daniel)
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Every address space should support object allocation. It therefore makes
sense to have the allocator be part of the "superclass" which GGTT and
PPGTT will derive.
Since our maximum address space size is only 2GB we're not yet able to
avoid doing allocation/eviction; but we'd hope one day this becomes
almost irrelvant.
v2: Rebased
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The GTT and PPGTT can be thought of more generally as GPU address
spaces. Many of their actions (insert entries), state (LRU lists), and
many of their characteristics (size) can be shared. Do that.
The change itself doesn't actually impact most of the VMA/VM rework
coming up, it just fits in with the grand scheme of abstracting the GPU
VM operations. GGTT will usually be a special case where we either know
an object must be in the GGTT (dislay engine, workarounds, etc.).
The scratch page is left as part of the VM (even though it's currently
shared with the ppgtt code) because in the future when we have Full
PPGTT, I intend to create a separate scratch page for each.
v2: Drop usage of i915_gtt_vm (Daniel)
Make cleanup also part of the parent class (Ben)
Modified commit msg
Rebased
v3: Properly share scratch page (Imre)
Finish commit message (Daniel, Imre)
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
To run hangcheck in near future.
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The default context is always supported (as it contains the global
hangcheck stats) and the contexts for hangcheck are not limited
to any ring.
References: https://bugs.freedesktop.org/show_bug.cgi?id=65845
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The eLLC cannot be determined by PCIID because as far as we know, even
machines supporting eLLC may not have it enabled, or fused off or
whatever. It's possible this isn't actually true, and at that point we
can switch to a DEV_INFO flag instead.
I've defined everything where the docs are clear, and left the rest as
magic.
But we need it before we set the pte_encode function pointers, which
happens really early, in gtt_init.
The problem with just doing the normal sequence earlier is we don't have
the ability to use forcewake until after the pte functions have been set
up.
Since all solutions are somewhat ugly (barring rewriting all the init
ordering), I've opted to do the detection really early, and the enabling
later - since the register to detect doesn't require forcewake.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
[danvet: Move dev_priv->ellc_size away from the dri1 dungeon to a nice
place right next to the l3 parity stuff. Also squash in the follow-up
commit to read out the eLLC size a bit earlier.]
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Move error state generation and stringification to it's
own compilation unit. Sysfs also uses this so it can't be
under CONFIG_DEBUG_FS
This fixes a regression introduced in
commit ef86ddced7
Author: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Date: Thu Jun 6 17:38:54 2013 +0300
drm/i915: add error_state sysfs entry
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=66814
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Now that the rps interrupt locking isn't clearly separated (at elast
conceptually) from all the other interrupt locking having a different
lock stopped making sense: It protects much more than just the rps
workqueue it started out with. But with the addition of VECS the
separation started to blurr and resulted in some more complex locking
for the ring interrupt refcount.
With this we can (again) unifiy the ringbuffer irq refcounts without
causing a massive confusion, but that's for the next patch.
v2: Explain better why the rps.lock once made sense and why no longer,
requested by Ben.
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
In kernel modeset driver mode we're in full control of the chip,
always. So there's no need at all to set mm.suspended in
i915_gem_idle. Hence move that out into the leavevt ioctl. Since
i915_gem_idle doesn't suspend gem any more we can also drop the
re-enabling for KMS in the thaw function.
Also clean up the handling of mm.suspend at driver load by coalescing
all the assignments.
Stumbled over while reading through our resume code for unrelated
reasons.
v2: Shovel mm.suspended into the (newly created) ums dungeon as
suggested by Chris Wilson. The plan is that once we've completely
stopped relying on the register save/restore code we could shovel even
that in there.
v3: Improve the locking for the entervt/leavevt ioctls a bit by moving
the dev->struct_mutex locking outside of i915_gem_idle. Also don't
clear dev_priv->ums.mm_suspended for the kms case, we allocate it with
kzalloc. Both suggested by Chris Wilson.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v2)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Pull drm updates from Dave Airlie:
"Okay this is the big one, I was stalled on the fbdev pull req as I
stupidly let fbdev guys merge a patch I required to fix a warning with
some patches I had, they ended up merging the patch from the wrong
place, but the warning should be fixed. In future I'll just take the
patch myself!
Outside drm:
There are some snd changes for the HDMI audio interactions on haswell,
they've been acked for inclusion via my tree. This relies on the
wound/wait tree from Ingo which is already merged.
Major changes:
AMD finally released the dynamic power management code for all their
GPUs from r600->present day, this is great, off by default for now but
also a huge amount of code, in fact it is most of this pull request.
Since it landed there has been a lot of community testing and Alex has
sent a lot of fixes for any bugs found so far. I suspect radeon might
now be the biggest kernel driver ever :-P p.s. radeon.dpm=1 to enable
dynamic powermanagement for anyone.
New drivers:
Renesas r-car display unit.
Other highlights:
- core: GEM CMA prime support, use new w/w mutexs for TTM
reservations, cursor hotspot, doc updates
- dvo chips: chrontel 7010B support
- i915: Haswell (fbc, ips, vecs, watermarks, audio powerwell),
Valleyview (enabled by default, rc6), lots of pll reworking, 30bpp
support (this time for sure)
- nouveau: async buffer object deletion, context/register init
updates, kernel vp2 engine support, GF117 support, GK110 accel
support (with external nvidia ucode), context cleanups.
- exynos: memory leak fixes, Add S3C64XX SoC series support, device
tree updates, common clock framework support,
- qxl: cursor hotspot support, multi-monitor support, suspend/resume
support
- mgag200: hw cursor support, g200 mode limiting
- shmobile: prime support
- tegra: fixes mostly
I've been banging on this quite a lot due to the size of it, and it
seems to okay on everything I've tested it on."
* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (811 commits)
drm/radeon/dpm: implement vblank_too_short callback for si
drm/radeon/dpm: implement vblank_too_short callback for cayman
drm/radeon/dpm: implement vblank_too_short callback for btc
drm/radeon/dpm: implement vblank_too_short callback for evergreen
drm/radeon/dpm: implement vblank_too_short callback for 7xx
drm/radeon/dpm: add checks against vblank time
drm/radeon/dpm: add helper to calculate vblank time
drm/radeon: remove stray line in old pm code
drm/radeon/dpm: fix display_gap programming on rv7xx
drm/nvc0/gr: fix gpc firmware regression
drm/nouveau: fix minor thinko causing bo moves to not be async on kepler
drm/radeon/dpm: implement force performance level for TN
drm/radeon/dpm: implement force performance level for ON/LN
drm/radeon/dpm: implement force performance level for SI
drm/radeon/dpm: implement force performance level for cayman
drm/radeon/dpm: implement force performance levels for 7xx/eg/btc
drm/radeon/dpm: add infrastructure to force performance levels
drm/radeon: fix surface setup on r1xx
drm/radeon: add support for 3d perf states on older asics
drm/radeon: set default clocks for SI when DPM is disabled
...
Embedding the node in the obj is more natural in the transition to VMAs
which will also have embedded nodes. This change also helps transition
away from put_block to remove node.
Though it's quite an uncommon occurrence, it's somewhat convenient to not
fail at bind time because we cannot allocate the node. Though in
practice there are other allocations (like the request structure) which
would probably make this point not terribly useful.
Quoting Daniel:
Note that the only difference between put_block and remove_node is
that the former fills up the preallocation cache. Which we don't need
anyway and hence is just wasted space.
v2: Clean up the stolen preallocation code.
Rebased on the reserve_node patches
renames ggtt_ stuff to gtt_ stuff
WARN_ON if the object is already bound (which doesn't mean it's in the
bound list, tricky)
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
With the getters in place from the previous patch this members serves no
purpose other than saving one spare pointer chase, which will be killed
in the next patch anyway.
Moving to VMAs, this members adds unnecessary confusion since an object
may exist at different offsets in different VMs.
v2: Properly preserve the stolen offset. This code is a bit hacky but it
all goes away when we embed the drm_mm_node and removes the need for the
incorrect patch I submitted previously: "Use gtt_space->start for stolen
reservation"
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Soon we want to gut a lot of our existing assumptions how many address
spaces an object can live in, and in doing so, embed the drm_mm_node in
the object (and later the VMA).
It's possible in the future we'll want to add more getter/setter
methods, but for now this is enough to enable the VMAs.
v2: Reworked commit message (Ben)
Added comments to the main functions (Ben)
sed -i "s/i915_gem_obj_set_color/i915_gem_obj_ggtt_set_color/" drivers/gpu/drm/i915/*.[ch]
sed -i "s/i915_gem_obj_bound/i915_gem_obj_ggtt_bound/" drivers/gpu/drm/i915/*.[ch]
sed -i "s/i915_gem_obj_size/i915_gem_obj_ggtt_size/" drivers/gpu/drm/i915/*.[ch]
sed -i "s/i915_gem_obj_offset/i915_gem_obj_ggtt_offset/" drivers/gpu/drm/i915/*.[ch]
(Daniel)
v3: Rebased on new reserve_node patch
Changed DRM_DEBUG_KMS to actually work (will need fixing later)
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
A magic -1 is a obscure, especially since it's actually passed as an
unsigned, so depends upon the magic sign extension rules in C. This has
been added in
commit 3727d55e4d
Author: Jesse Barnes <jbarnes@virtuousgeek.org>
Date: Wed May 8 10:45:14 2013 -0700
drm/i915: allow stolen, pre-allocated objects to avoid GTT allocation v2
Use a proper #define instead. Spotted while reviewing Ben's
drm_mm_create_block changes.
v2: Cast the constant to u32 since otherwise we again have a type
mismatch. Suggested by Chris Wilson.
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Make function for struct i915_error_state_buf initialization
and export it, for sysfs and debugfs.
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
In preparation for sysfs error state access,
export ref error state ref counting interface.
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
In preparation for accessing error state from sysfs, export
error state to string conversion function. Also tuck buffer
error handling inside the function.
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We need this for comparing modes between configuration changes.
The tricky part is to allow us to reuse the new get_clock stuff to
recover the lvds clock on gen2/3 when neither the vbt has an lvds mode
nor the panel a (useful) EDID.
v2: try harder to calulate non-simple pixel clocks (Daniel)
call get_clock after getting the encoder config, needed for pixel multiply
(Jesse)
v3: drop get_clock now that the pixel_multiply has been moved into
get_pipe_config
v4: re-add get_clock; we need to get the pixel multiplier in the
encoder, so need to calculate the clock value after the encoder's
get_config is called
v5: drop hsw clock_get, still needs to be written
v6: add fuzzy clock check (Daniel)
v7: wrap fuzzy clock check under !IS_HASWELL
use port_clock field rather than a new CPU eDP clock field in crtc_config
v8: remove stale pixel_multiplier sets (Daniel)
multiply by pixel_multiplier in 9xx clock get too (Daniel)
v9: make sure we set pixel_multiplier before calling clock_get from mode_get
for LVDS (Daniel)
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
[danvet: Add some explanation to the commit message about why we have
to jump through a few hoops. Also remove the rebase-fail hunk from
intel_sdvo.c]
[danvet: Squash in the fixup from Jesse to also call ->get_clock in
the modeset state checker.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Handling all the state properly for fastboot is still not yet done by
far, but we need some way to be able to test what we currently have.
So hide the not-yet-quite-complete stuff behind a module option.
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
[danvet: Add a real commit message.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
for file in `ls drivers/gpu/drm/i915/*.c` ; do
sed -i "s/mm.gtt_mtrr/gtt.mtrr/" $file;
done
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
[danvet: Resolve conflict with Damien's FBC_CHIP_DEFAULT no fbc
reason.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The original pte_encode function needed the dev argument so we could do
platform specific handling via IS_GENX, etc. With the merging of a pte
encoding function there should never been a need to quirk away gen
specific details.
The patch doesn't do much but makes the upcoming reworks in gtt/ppgtt/mm
slightly (albeit, ever so) easier.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
There isn't any special reason to do this other than it makes it obvious
that the two members are connected.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
A previous patch had set up the ppgtt and ggtt to use the same scratch
page, but still kept around both pointers. Kill it, it's not needed and
gets in our way for upcoming cleanups.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Nothing outside of i915_gem_gtt.c and more specifically, the relevant
gen specific init function should need to know about number of PDEs, or
PTEs per PD. Exposing this will only lead to circumventing using the
upcoming VM abstraction.
To accomplish this, move the defines into the .c file, rename the PDE
define to be GEN6, and make the PTE count less of a magic number.
The remaining code in the global gtt setup is a bit messy, but an
upcoming patch will clean that one up.
v2: Don't hardcode number of PDEs (Daniel + Jesse)
Reworded commit message to reflect change.
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
In addition to existing stuff we also need to track DPLL_MD on gen4
and vlv. This is prep work so that we can move the dpll enable
sequence out from the ->mode_set callback into the crtc enabling
functions.
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
It's been splattered over 3 different places all doing random things.
Now we have (mostly) the same sequence as i8xx/i9xx, but all called
from the crtc_enable hook (through the pll->enable function):
- write new dividers
- enable vco and wait for stable clocks
- write again for the pixel mutliplier
I've left the seemingly random 200 usec delay in there, just in case.
Also move the encoder->pre_pll_enable hook into the crtc_enable
function, at the same spot we currently have a hack to enable the lvds
port. Since that hack is now redundant, kill it.
While doing this patch I've learned the hard way that we can only fire
up the LVDS port if both the pch dpll _and_ the fdi rc pll are not yet
enabled. Otherwise things go haywire, at least on cpt.
v2: It is paramount to write the FPx divisors before we enable the
the vco by writing to the DPLL registers, for otherwise the divisors
won't get updated. This is in line with the i8xx/i9xx dpll.
v3: To keep the nice abstraction add a ->mode_set callback to set the
divisors. Also streamline the enabling/disabling code a bit by
removing some cargo-cult duplication and clearing registers where
possible in the ->disable hook.
v4: Remove now unused local variable.
Acked-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
