Previously, f2fs activates SSR if the # of free segments reaches to the # of
overprovisioned segments.
In this case, SSR starts to use dirty segments only, so that the overprovisoned
space cannot be selected for new data.
This means that we have no chance to utilizae the overprovisioned space at all.
This patch fixes that by allowing LFS allocations until the # of free segments
reaches to the last threshold, reserved space.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch changes the ipu_policy setting to use any combination of orthogonal policies.
Signed-off-by: Changman Lee <cm224.lee@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In ->get_victim we get max_search value from dirty_i->nr_dirty without
protection of seglist_lock, after that, nr_dirty can be increased/decreased
before we hold seglist_lock lock.
Then in main loop we attempt to traverse all dirty section one time to find
victim section, but it's not accurate to use max_search as the total loop count,
because we might lose checking several sections or check sections redundantly
for the case of nr_dirty are increased or decreased previously.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In manual of mount, we descript remount as below:
"mount -o remount,rw /dev/foo /dir
After this call all old mount options are replaced and arbitrary stuff from
fstab is ignored, except the loop= option which is internally generated and
maintained by the mount command."
Previously f2fs do not clear up old mount options when remount_fs, so we have no
chance of disabling previous option (e.g. flush_merge). Fix it.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Now punching hole in directory is not supported in f2fs, so let's limit file
type in punch_hole().
In addition, in punch_hole if offset is exceed file size, we should skip
punching hole.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Block size in f2fs is 4096 bytes, so theoretically, f2fs can support 4096 bytes
sector device at maximum. But now f2fs only support 512 bytes size sector, so
block device such as zRAM which uses page cache as its block storage space will
not be mounted successfully as mismatch between sector size of zRAM and sector
size of f2fs supported.
In this patch we support large sector size in f2fs, so block device with sector
size of 512/1024/2048/4096 bytes can be supported in f2fs.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
By using FALLOC_FL_KEEP_SIZE in ->fallocate of f2fs, we can fallocate block past
EOF without changing i_size of inode. These blocks past EOF will not be
truncated in ->setattr as we truncate them only when change the file size.
We should give a chance to truncate blocks out of filesize in setattr().
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The f2fs_direct_IO uses __allocate_data_block, but inside the allocation path,
we should update i_size at the changed time to update its inode page.
Otherwise, we can get wrong i_size after roll-forward recovery.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If same data is updated multiple times, we don't need to redo whole the
operations.
Let's just update the lastest one.
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In f2fs_sync_file, if there is no written appended writes, it skips
to write its node blocks.
But, if there is up-to-date inode page, we should write it to update
its metadata during the roll-forward recovery.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
We can summarize the roll forward recovery scenarios as follows.
[Term] F: fsync_mark, D: dentry_mark
1. inode(x) | CP | inode(x) | dnode(F)
-> Update the latest inode(x).
2. inode(x) | CP | inode(F) | dnode(F)
-> No problem.
3. inode(x) | CP | dnode(F) | inode(x)
-> Recover to the latest dnode(F), and drop the last inode(x)
4. inode(x) | CP | dnode(F) | inode(F)
-> No problem.
5. CP | inode(x) | dnode(F)
-> The inode(DF) was missing. Should drop this dnode(F).
6. CP | inode(DF) | dnode(F)
-> No problem.
7. CP | dnode(F) | inode(DF)
-> If f2fs_iget fails, then goto next to find inode(DF).
8. CP | dnode(F) | inode(x)
-> If f2fs_iget fails, then goto next to find inode(DF).
But it will fail due to no inode(DF).
So, this patch adds some missing points such as #1, #5, #7, and #8.
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch revisited whole the recovery information during the f2fs_sync_file.
In this patch, there are three information to make a decision.
a) IS_CHECKPOINTED, /* is it checkpointed before? */
b) HAS_FSYNCED_INODE, /* is the inode fsynced before? */
c) HAS_LAST_FSYNC, /* has the latest node fsync mark? */
And, the scenarios for our rule are based on:
[Term] F: fsync_mark, D: dentry_mark
1. inode(x) | CP | inode(x) | dnode(F)
2. inode(x) | CP | inode(F) | dnode(F)
3. inode(x) | CP | dnode(F) | inode(x) | inode(F)
4. inode(x) | CP | dnode(F) | inode(F)
5. CP | inode(x) | dnode(F) | inode(DF)
6. CP | inode(DF) | dnode(F)
7. CP | dnode(F) | inode(DF)
8. CP | dnode(F) | inode(x) | inode(DF)
For example, #3, the three conditions should be changed as follows.
inode(x) | CP | dnode(F) | inode(x) | inode(F)
a) x o o o o
b) x x x x o
c) x o o x o
If f2fs_sync_file stops ------^,
it should write inode(F) --------------^
So, the need_inode_block_update should return true, since
c) get_nat_flag(e, HAS_LAST_FSYNC), is false.
For example, #8,
CP | alloc | dnode(F) | inode(x) | inode(DF)
a) o x x x x
b) x x x o
c) o o x o
If f2fs_sync_file stops -------^,
it should write inode(DF) --------------^
Note that, the roll-forward policy should follow this rule, which means,
if there are any missing blocks, we doesn't need to recover that inode.
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch introduces a flag in the nat entry structure to merge various
information such as checkpointed and fsync_done marks.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Previously, all the dnode pages should be read during the roll-forward recovery.
Even worsely, whole the chain was traversed twice.
This patch removes that redundant and costly read operations by using page cache
of meta_inode and readahead function as well.
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If the inode is same and its data index are needed to truncate, we can fall into
double lock for its inode page via get_dnode_of_data.
Error case is like this.
1. write data 1, 2, 3, 4, 5 in inode #4.
2. write data 100, 102, 103, 104, 105 in dnode #6 of inode #4.
3. sync
4. update data 100->106 in dnode #6.
5. fsync inode #4.
6. power-cut
-> Then,
1. go back to #3's checkpoint
2. in do_recover_data, get_dnode_of_data() gets inode #4.
3. detect 100->106 in dnode #6.
4. check_index_in_prev_nodes tries to truncate 100 in dnode #6.
5. to trigger truncate_hole, get_dnode_of_data should grab inode #4.
6. detect *kernel hang*
This patch should resolve that bug.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The nm_i->fcnt checking is executed before spin_lock, so if another
thread delete the last free_nid from the list, the wrong nid may be
gotten. So fix the race condition by moving the nm_i->fnct checking
into spin_lock.
Signed-off-by: Huang, Ying <ying.huang@intel.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Now, if there is no free nid in nm_i->free_nid_list, 0 may be saved
into next_free_nid of checkpoint, this may cause useless scanning for
next mount. nm_i->next_scan_nid should be a better default value than
0.
Signed-off-by: Huang, Ying <ying.huang@intel.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If user wrote F2FS_IPU_FSYNC:4 in /sys/fs/f2fs/ipu_policy, f2fs_sync_file
only starts to try in-place-updates.
And, if the number of dirty pages is over /sys/fs/f2fs/min_fsync_blocks, it
keeps out-of-order manner. Otherwise, it triggers in-place-updates.
This may be used by storage showing very high random write performance.
For example, it can be used when,
Seq. writes (Data) + wait + Seq. writes (Node)
is pretty much slower than,
Rand. writes (Data)
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Previously f2fs only counts dirty dentry pages, but there is no reason not to
expand the scope.
This patch changes the names on the management of dirty pages and to count
dirty pages in each inode info as well.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If application throws negative value of lseek with SEEK_DATA|SEEK_HOLE,
previous f2fs went into BUG_ON in get_dnode_of_data, which was reported
by Tommi Rantala.
He could make a simple code to detect this having:
lseek(fd, -17595150933902LL, SEEK_DATA);
This patch should resolve that bug.
Reported-by: Tommi Rentala <tt.rantala@gmail.com>
[Jaegeuk Kim: relocate the condition as suggested by Chao]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In gc_node_segment, if node page gc is run concurrently with node page
writeback, and check_valid_map and get_node_page run after page locked
and before cur_valid_map is updated as below, it is possible for the
page to be written twice unnecessarily.
sync_node_pages
try_lock_page
...
check_valid_map f2fs_write_node_page
...
write_node_page
do_write_page
allocate_data_block
...
refresh_sit_entry /* update cur_valid_map */
...
...
unlock_page
get_node_page
...
set_page_dirty
...
f2fs_put_page
unlock_page
This can be solved via calling check_valid_map after get_node_page again.
Signed-off-by: Huang, Ying <ying.huang@intel.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
We use flush cmd control to collect many flush cmds, and flush them
together. In this case, we use two list to manage the flush cmds
(collect and dispatch), and one spin lock is used to protect this.
In fact, the lock-less list(llist) is very suitable to this case,
and we use simplify this routine.
-
v2:
-use llist_for_each_entry_safe to fix possible use-after-free issue.
-remove the unused field from struct flush_cmd.
Thanks for Yu's suggestion.
-
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In commit aec71382c6 ("f2fs: refactor flush_nat_entries codes for reducing NAT
writes"), we descripte the issue as below:
"Although building NAT journal in cursum reduce the read/write work for NAT
block, but previous design leave us lower performance when write checkpoint
frequently for these cases:
1. if journal in cursum has already full, it's a bit of waste that we flush all
nat entries to page for persistence, but not to cache any entries.
2. if journal in cursum is not full, we fill nat entries to journal util
journal is full, then flush the left dirty entries to disk without merge
journaled entries, so these journaled entries may be flushed to disk at next
checkpoint but lost chance to flushed last time."
Actually, we have the same problem in using SIT journal area.
In this patch, firstly we will update sit journal with dirty entries as many as
possible. Secondly if there is no space in sit journal, we will remove all
entries in journal and walk through the whole dirty entry bitmap of sit,
accounting dirty sit entries located in same SIT block to sit entry set. All
entry sets are linked to list sit_entry_set in sm_info, sorted ascending order
by count of entries in set. Later we flush entries in set which have fewest
entries into journal as many as we can, and then flush dense set with merged
entries to disk.
In this way we can use sit journal area more effectively, also we will reduce
SIT update, result in gaining in performance and saving lifetime of flash
device.
In my testing environment, it shows this patch can help to reduce SIT block
update obviously.
virtual machine + hard disk:
fsstress -p 20 -n 400 -l 5
sit page num cp count sit pages/cp
based 2006.50 1349.75 1.486
patched 1566.25 1463.25 1.070
Our latency of merging op is small when handling a great number of dirty SIT
entries in flush_sit_entries:
latency(ns) dirty sit count
36038 2151
49168 2123
37174 2232
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
sit_i in macro SIT_BLOCK_OFFSET/START_SEGNO is not used, remove it.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch replaces BUG cases with f2fs_bug_on to remain fsck.f2fs information.
And it implements some void functions to initiate fsck.f2fs too.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
As the race condition on the inode cache, following scenario can appear:
[Thread a] [Thread b]
->f2fs_mkdir
->f2fs_add_link
->__f2fs_add_link
->init_inode_metadata failed here
->gc_thread_func
->f2fs_gc
->do_garbage_collect
->gc_data_segment
->f2fs_iget
->iget_locked
->wait_on_inode
->unlock_new_inode
->move_data_page
->make_bad_inode
->iput
When we fail in create/symlink/mkdir/mknod/tmpfile, the new allocated inode
should be set as bad to avoid being accessed by other thread. But in above
scenario, it allows f2fs to access the invalid inode before this inode was set
as bad.
This patch fix the potential problem, and this issue was found by code review.
change log from v1:
o Add condition judgment in gc_data_segment() suggested by Changman Lee.
o use iget_failed to simplify code.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The dentry name type is unsigned char *.
If we don't match this type, some character codes can be changed by signed bit.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
We can make the code a bit simpler because we know that "!retry" is
zero.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This verifies to truncate any allocated blocks, offset[0], by inline_data.
Not figured out, but for making sure.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch introduces DEF_NIDS_PER_INODE/GET_ORPHAN_BLOCKS/F2FS_CP_PACKS macro
instead of numbers in code for readability.
change log from v1:
o fix typo pointed out by Jaegeuk Kim.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch introduce need_do_checkpoint() to include numerous judgment condition
for readability.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Theoretically, our total inodes number is the same as total node number, but
there are three node ids are reserved in f2fs, they are 0, 1 (node nid), and 2
(meta nid), and they should never be used by user, so our total/free inode
number calculated in ->statfs is wrong.
This patch indroduces F2FS_RESERVED_NODE_NUM and then fixes this issue by
recalculating total/free inode number with the macro.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch checks inline_data one more time under the inode page lock whether
its inline_data is converted or not.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
I think we need to let the dirty node pages remain in the page cache instead
of rewriting them in their places.
So, after done with successful recovery, write_checkpoint will flush all of them
through the normal write path.
Through this, we can avoid potential error cases in terms of block allocation.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The init_inode_metadata calls truncate_blocks when error is occurred.
The callers holds f2fs_lock_op, so we should not call it again in
truncate_blocks.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Any checkpoint should not be done during the core roll-forward procedure.
Especially, it includes error cases too.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
There are two rules when EIO is occurred.
1. don't write any checkpoint data to preserve the previous checkpoint
2. don't lose the cached dentry/node/meta pages
So, at first, this patch adds set_page_dirty in f2fs_write_end_io's failure.
Then, writing checkpoint/dentry/node blocks is not allowed.
Note that, for the data pages, we can't just throw away by redirtying them.
Otherwise, kworker can fall into infinite loop to flush them.
(Ref. xfstests/019)
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
It needs to check s_dirty under cp_mutex, since s_dirty is reset under that
mutex.
And previous condition was not correct, since we can omit doing checkpoint
when checkpoint was done followed by all the node pages were written back.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch gives another chance to try mount process when we encounter an error.
This makes an effect on the roll-forward recovery failures as well.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Jaegeuk Kim