recv_data either returns the number of received bytes, or a negative value
representing an error code. Adding the return value directly to the total
number of received bytes therefore looks a little weird, since it might add
a negative error code to a sum of bytes.
The following check for size < expected usually makes the function return
ETIME in that case, so it does not cause too many problems in practice. But
to make the code look cleaner and because the caller might still be
interested in the original error code, explicitly check for the presence of
an error code and pass that through.
Cc: stable@vger.kernel.org
Fixes: cb5354253a ("[PATCH] tpm: spacing cleanups 2")
Signed-off-by: Alexander Steffen <Alexander.Steffen@infineon.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
After commit b8a1a4cd5a ("i2c: Provide a temporary .probe_new()
call-back type"), all drivers being converted to .probe_new() and then
03c835f498 ("i2c: Switch .probe() to not take an id parameter")
convert back to (the new) .probe() to be able to eventually drop
.probe_new() from struct i2c_driver.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
After activation of interrupts for TPM TIS drivers 0-day reports an
interrupt storm on an Inspur NF5180M6 server.
Fix this by detecting the storm and falling back to polling:
Count the number of unhandled interrupts within a 10 ms time interval. In
case that more than 1000 were unhandled deactivate interrupts entirely,
deregister the handler and use polling instead.
Also print a note to point to the tpm_tis_dmi_table.
Since the interrupt deregistration function devm_free_irq() waits for all
interrupt handlers to finish, only trigger a worker in the interrupt
handler and do the unregistration in the worker to avoid a deadlock.
Note: the storm detection logic equals the implementation in
note_interrupt() which uses timestamps and counters stored in struct
irq_desc. Since this structure is private to the generic interrupt core
the TPM TIS core uses its own timestamps and counters. Furthermore the TPM
interrupt handler always returns IRQ_HANDLED to prevent the generic
interrupt core from processing the interrupt storm.
Cc: stable@vger.kernel.org # v6.4+
Fixes: e644b2f498 ("tpm, tpm_tis: Enable interrupt test")
Reported-by: kernel test robot <yujie.liu@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202305041325.ae8b0c43-yujie.liu@intel.com/
Suggested-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
The Lenovo L590 suffers from an irq storm issue like the T490, T490s
and P360 Tiny, so add an entry for it to tpm_tis_dmi_table and force
polling.
Cc: stable@vger.kernel.org # v6.4+
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2214069#c0
Fixes: e644b2f498 ("tpm, tpm_tis: Enable interrupt test")
Signed-off-by: Florian Bezdeka <florian@bezdeka.de>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
For Pluton TPM devices, it was assumed that there was no ACPI memory
regions. This is not true for ASUS ROG Ally. ACPI advertises
0xfd500000-0xfd5fffff.
Since remapping is already done in `crb_map_pluton`, remapping again
in `crb_map_io` causes EBUSY error:
[ 3.510453] tpm_crb MSFT0101:00: can't request region for resource [mem 0xfd500000-0xfd5fffff]
[ 3.510463] tpm_crb: probe of MSFT0101:00 failed with error -16
Cc: stable@vger.kernel.org # v6.3+
Fixes: 4d27328827 ("tpm_crb: Add support for CRB devices based on Pluton")
Signed-off-by: Valentin David <valentin.david@gmail.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
tpm_amd_is_rng_defective is for dealing with an issue related to the
AMD firmware TPM, so on non-x86 architectures just have it inline and
return false.
Cc: stable@vger.kernel.org # v6.3+
Reported-by: Sachin Sant <sachinp@linux.ibm.com>
Reported-by: Aneesh Kumar K. V <aneesh.kumar@linux.ibm.com>
Closes: https://lore.kernel.org/lkml/99B81401-DB46-49B9-B321-CF832B50CAC3@linux.ibm.com/
Fixes: f1324bbc40 ("tpm: disable hwrng for fTPM on some AMD designs")
Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Underlying I2C bus drivers not always support longer transfers and
imx-lpi2c for instance doesn't. The fix is symmetric to previous patch
which fixed the read direction.
Cc: stable@vger.kernel.org # v5.20+
Fixes: bbc23a07b0 ("tpm: Add tpm_tis_i2c backend for tpm_tis_core")
Tested-by: Michael Haener <michael.haener@siemens.com>
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Underlying I2C bus drivers not always support longer transfers and
imx-lpi2c for instance doesn't. SLB 9673 offers 427-bytes packets.
Visible symptoms are:
tpm tpm0: Error left over data
tpm tpm0: tpm_transmit: tpm_recv: error -5
tpm_tis_i2c: probe of 1-002e failed with error -5
Cc: stable@vger.kernel.org # v5.20+
Fixes: bbc23a07b0 ("tpm: Add tpm_tis_i2c backend for tpm_tis_core")
Tested-by: Michael Haener <michael.haener@siemens.com>
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
The failure paths in tpm_tis_spi_transfer() do not deactivate
chip select. Send an empty message (cs_select == 0) to overcome
this.
The patch is tested by two ways.
One way needs to touch hardware:
1. force pull MISO pin down to GND, it emulates a forever
'WAIT' timing.
2. probe cs pin by an oscilloscope.
3. load tpm_tis_spi.ko.
After loading, dmesg prints:
"probe of spi0.0 failed with error -110"
and oscilloscope shows cs pin goes high(deactivated) after
the failure. Before the patch, cs pin keeps low.
Second way is by writing a fake spi controller.
1. implement .transfer_one method, fill all rx buf with 0.
2. implement .set_cs method, print the state of cs pin.
we can see cs goes high after the failure.
Signed-off-by: Peijie Shao <shaopeijie@cestc.cn>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
/dev/vtpmx is made visible before 'workqueue' is initialized, which can
lead to a memory corruption in the worst case scenario.
Address this by initializing 'workqueue' as the very first step of the
driver initialization.
Cc: stable@vger.kernel.org
Fixes: 6f99612e25 ("tpm: Proxy driver for supporting multiple emulated TPMs")
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@tuni.fi>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
resume support in vdpa/solidrun
structure size optimizations in virtio_pci
new pds_vdpa driver
immediate initialization mechanism for vdpa/ifcvf
interrupt bypass for vdpa/mlx5
multiple worker support for vhost
viirtio net in Intel F2000X-PL support for vdpa/ifcvf
fixes, cleanups all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmSi95cPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpJ58H/A++mwjLsoiJ/3xgf2S2Fn0p0lkgxg61LrjD
Q9p8zstG/BndRvv018XcJKoklaHpb4WcmNctKRNZJ6BjPj+ZwdADuSzoaUNurPD4
M3s/nXVWvg7/2FifGDpCzQpyw0MR0Ip6/yqtdTl4vuLZGxI1nNGDfYbDgc3vZeCp
pYTLsl/XUPzix4iJouEQqy5rmlUia3IE751aECrdk58z17lDo/Znar4hsXF0acQY
+G6C/MNZQgf1rtJIl901h54W8rAoubxeda80uXSQk9fDyPG/wZYh2wFBGPi9qYa+
9E+tOgHprMZ7G5GEopDdd19UctuW7M+YXPWZa1ijp8EZXmMpzuo=
=5tdF
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
- resume support in vdpa/solidrun
- structure size optimizations in virtio_pci
- new pds_vdpa driver
- immediate initialization mechanism for vdpa/ifcvf
- interrupt bypass for vdpa/mlx5
- multiple worker support for vhost
- viirtio net in Intel F2000X-PL support for vdpa/ifcvf
- fixes, cleanups all over the place
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (48 commits)
vhost: Make parameter name match of vhost_get_vq_desc()
vduse: fix NULL pointer dereference
vhost: Allow worker switching while work is queueing
vhost_scsi: add support for worker ioctls
vhost: allow userspace to create workers
vhost: replace single worker pointer with xarray
vhost: add helper to parse userspace vring state/file
vhost: remove vhost_work_queue
vhost_scsi: flush IO vqs then send TMF rsp
vhost_scsi: convert to vhost_vq_work_queue
vhost_scsi: make SCSI cmd completion per vq
vhost_sock: convert to vhost_vq_work_queue
vhost: convert poll work to be vq based
vhost: take worker or vq for flushing
vhost: take worker or vq instead of dev for queueing
vhost, vhost_net: add helper to check if vq has work
vhost: add vhost_worker pointer to vhost_virtqueue
vhost: dynamically allocate vhost_worker
vhost: create worker at end of vhost_dev_set_owner
virtio_bt: call scheduler when we free unused buffs
...
Here is the big set of char/misc and other driver subsystem updates for
6.5-rc1.
Lots of different, tiny, stuff in here, from a range of smaller driver
subsystems, including pulls from some substems directly:
- IIO driver updates and additions
- W1 driver updates and fixes (and a new maintainer!)
- FPGA driver updates and fixes
- Counter driver updates
- Extcon driver updates
- Interconnect driver updates
- Coresight driver updates
- mfd tree tag merge needed for other updates
on top of that, lots of small driver updates as patches, including:
- static const updates for class structures
- nvmem driver updates
- pcmcia driver fix
- lots of other small driver updates and fixes
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZKKNMw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylhlQCfZrtz8RIbau8zbzh/CKpKBOmvHp4An3V64hbz
recBPLH0ZACKl0wPl4iZ
=A83A
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull Char/Misc updates from Greg KH:
"Here is the big set of char/misc and other driver subsystem updates
for 6.5-rc1.
Lots of different, tiny, stuff in here, from a range of smaller driver
subsystems, including pulls from some substems directly:
- IIO driver updates and additions
- W1 driver updates and fixes (and a new maintainer!)
- FPGA driver updates and fixes
- Counter driver updates
- Extcon driver updates
- Interconnect driver updates
- Coresight driver updates
- mfd tree tag merge needed for other updates on top of that, lots of
small driver updates as patches, including:
- static const updates for class structures
- nvmem driver updates
- pcmcia driver fix
- lots of other small driver updates and fixes
All of these have been in linux-next for a while with no reported
problems"
* tag 'char-misc-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (243 commits)
bsr: fix build problem with bsr_class static cleanup
comedi: make all 'class' structures const
char: xillybus: make xillybus_class a static const structure
xilinx_hwicap: make icap_class a static const structure
virtio_console: make port class a static const structure
ppdev: make ppdev_class a static const structure
char: misc: make misc_class a static const structure
/dev/mem: make mem_class a static const structure
char: lp: make lp_class a static const structure
dsp56k: make dsp56k_class a static const structure
bsr: make bsr_class a static const structure
oradax: make 'cl' a static const structure
hwtracing: hisi_ptt: Fix potential sleep in atomic context
hwtracing: hisi_ptt: Advertise PERF_PMU_CAP_NO_EXCLUDE for PTT PMU
hwtracing: hisi_ptt: Export available filters through sysfs
hwtracing: hisi_ptt: Add support for dynamically updating the filter list
hwtracing: hisi_ptt: Factor out filter allocation and release operation
samples: pfsm: add CC_CAN_LINK dependency
misc: fastrpc: check return value of devm_kasprintf()
coresight: dummy: Update type of mode parameter in dummy_{sink,source}_enable()
...
For virtio-net we were getting CPU stall warnings, and fixed it by
calling the scheduler: see f8bb510439 ("virtio_net: suppress cpu stall
when free_unused_bufs").
This driver is similar so theoretically the same logic applies.
Signed-off-by: Xianting Tian <xianting.tian@linux.alibaba.com>
Message-Id: <20230609131817.712867-3-xianting.tian@linux.alibaba.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
API:
- Add linear akcipher/sig API.
- Add tfm cloning (hmac, cmac).
- Add statesize to crypto_ahash.
Algorithms:
- Allow only odd e and restrict value in FIPS mode for RSA.
- Replace LFSR with SHA3-256 in jitter.
- Add interface for gathering of raw entropy in jitter.
Drivers:
- Fix race on data_avail and actual data in hwrng/virtio.
- Add hash and HMAC support in starfive.
- Add RSA algo support in starfive.
- Add support for PCI device 0x156E in ccp.
-----BEGIN PGP SIGNATURE-----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=rOLu
-----END PGP SIGNATURE-----
Merge tag 'v6.5-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Add linear akcipher/sig API
- Add tfm cloning (hmac, cmac)
- Add statesize to crypto_ahash
Algorithms:
- Allow only odd e and restrict value in FIPS mode for RSA
- Replace LFSR with SHA3-256 in jitter
- Add interface for gathering of raw entropy in jitter
Drivers:
- Fix race on data_avail and actual data in hwrng/virtio
- Add hash and HMAC support in starfive
- Add RSA algo support in starfive
- Add support for PCI device 0x156E in ccp"
* tag 'v6.5-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (85 commits)
crypto: akcipher - Do not copy dst if it is NULL
crypto: sig - Fix verify call
crypto: akcipher - Set request tfm on sync path
crypto: sm2 - Provide sm2_compute_z_digest when sm2 is disabled
hwrng: imx-rngc - switch to DEFINE_SIMPLE_DEV_PM_OPS
hwrng: st - keep clock enabled while hwrng is registered
hwrng: st - support compile-testing
hwrng: imx-rngc - fix the timeout for init and self check
KEYS: asymmetric: Use new crypto interface without scatterlists
KEYS: asymmetric: Move sm2 code into x509_public_key
KEYS: Add forward declaration in asymmetric-parser.h
crypto: sig - Add interface for sign/verify
crypto: akcipher - Add sync interface without SG lists
crypto: cipher - On clone do crypto_mod_get()
crypto: api - Add __crypto_alloc_tfmgfp
crypto: api - Remove crypto_init_ops()
crypto: rsa - allow only odd e and restrict value in FIPS mode
crypto: geniv - Split geniv out of AEAD Kconfig option
crypto: algboss - Add missing dependency on RNG2
crypto: starfive - Add RSA algo support
...
- added support for Wifi/Bluetooth on CI20
- reworked Ralink clock and reset handling
- cleanups and fixes
-----BEGIN PGP SIGNATURE-----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=z9/q
-----END PGP SIGNATURE-----
Merge tag 'mips_6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS updates from Thomas Bogendoerfer:
- add support for TP-Link HC220 G5 v1
- add support for Wifi/Bluetooth on CI20
- rework Ralink clock and reset handling
- cleanups and fixes
* tag 'mips_6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (58 commits)
MIPS: Loongson64: DTS: Add RTC support to Loongson-2K1000
MIPS: Loongson64: DTS: Add RTC support to LS7A PCH
MIPS: OCTEON: octeon-usb: cleanup divider calculation
MIPS: OCTEON: octeon-usb: introduce dwc3_octeon_{read,write}q
MIPS: OCTEON: octeon-usb: move gpio config to separate function
MIPS: OCTEON: octeon-usb: use bitfields for shim register
MIPS: OCTEON: octeon-usb: use bitfields for host config register
MIPS: OCTEON: octeon-usb: use bitfields for control register
MIPS: OCTEON: octeon-usb: add all register offsets
mips: ralink: match all supported system controller compatible strings
MIPS: dec: prom: Address -Warray-bounds warning
MIPS: DTS: CI20: Raise VDDCORE voltage to 1.125 volts
clk: ralink: mtmips: Fix uninitialized use of ret in mtmips_register_{fixed,factor}_clocks()
mips: ralink: introduce commonly used remap node function
mips: pci-mt7620: use dev_info() to log PCIe device detection result
mips: pci-mt7620: do not print NFTS register value as error log
MAINTAINERS: add Mediatek MTMIPS Clock maintainer
mips: ralink: get cpu rate from new driver code
mips: ralink: remove reset related code
mips: ralink: mt7620: remove clock related code
...
-----BEGIN PGP SIGNATURE-----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=KhW4
-----END PGP SIGNATURE-----
Merge tag 'for-6.5/splice-2023-06-23' of git://git.kernel.dk/linux
Pull splice updates from Jens Axboe:
"This kills off ITER_PIPE to avoid a race between truncate,
iov_iter_revert() on the pipe and an as-yet incomplete DMA to a bio
with unpinned/unref'ed pages from an O_DIRECT splice read. This causes
memory corruption.
Instead, we either use (a) filemap_splice_read(), which invokes the
buffered file reading code and splices from the pagecache into the
pipe; (b) copy_splice_read(), which bulk-allocates a buffer, reads
into it and then pushes the filled pages into the pipe; or (c) handle
it in filesystem-specific code.
Summary:
- Rename direct_splice_read() to copy_splice_read()
- Simplify the calculations for the number of pages to be reclaimed
in copy_splice_read()
- Turn do_splice_to() into a helper, vfs_splice_read(), so that it
can be used by overlayfs and coda to perform the checks on the
lower fs
- Make vfs_splice_read() jump to copy_splice_read() to handle
direct-I/O and DAX
- Provide shmem with its own splice_read to handle non-existent pages
in the pagecache. We don't want a ->read_folio() as we don't want
to populate holes, but filemap_get_pages() requires it
- Provide overlayfs with its own splice_read to call down to a lower
layer as overlayfs doesn't provide ->read_folio()
- Provide coda with its own splice_read to call down to a lower layer
as coda doesn't provide ->read_folio()
- Direct ->splice_read to copy_splice_read() in tty, procfs, kernfs
and random files as they just copy to the output buffer and don't
splice pages
- Provide wrappers for afs, ceph, ecryptfs, ext4, f2fs, nfs, ntfs3,
ocfs2, orangefs, xfs and zonefs to do locking and/or revalidation
- Make cifs use filemap_splice_read()
- Replace pointers to generic_file_splice_read() with pointers to
filemap_splice_read() as DIO and DAX are handled in the caller;
filesystems can still provide their own alternate ->splice_read()
op
- Remove generic_file_splice_read()
- Remove ITER_PIPE and its paraphernalia as generic_file_splice_read
was the only user"
* tag 'for-6.5/splice-2023-06-23' of git://git.kernel.dk/linux: (31 commits)
splice: kdoc for filemap_splice_read() and copy_splice_read()
iov_iter: Kill ITER_PIPE
splice: Remove generic_file_splice_read()
splice: Use filemap_splice_read() instead of generic_file_splice_read()
cifs: Use filemap_splice_read()
trace: Convert trace/seq to use copy_splice_read()
zonefs: Provide a splice-read wrapper
xfs: Provide a splice-read wrapper
orangefs: Provide a splice-read wrapper
ocfs2: Provide a splice-read wrapper
ntfs3: Provide a splice-read wrapper
nfs: Provide a splice-read wrapper
f2fs: Provide a splice-read wrapper
ext4: Provide a splice-read wrapper
ecryptfs: Provide a splice-read wrapper
ceph: Provide a splice-read wrapper
afs: Provide a splice-read wrapper
9p: Add splice_read wrapper
net: Make sock_splice_read() use copy_splice_read() by default
tty, proc, kernfs, random: Use copy_splice_read()
...
In commit e55ce9fd3d ("bsr: make bsr_class a static const structure"),
the bsr_init function was converted to handle a static class structure,
but the conversion got a variable name wrong, which caused build errors
so fix that up.
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Ivan Orlov <ivan.orlov0322@gmail.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://lore.kernel.org/r/20230626142537.755ec782@canb.auug.org.au
Fixes: e55ce9fd3d ("bsr: make bsr_class a static const structure")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now that the driver core allows for struct class to be in read-only
memory, move the xillybus_class structure to be declared at build time
placing it into read-only memory, instead of having to be dynamically
allocated at load time.
Cc: Eli Billauer <eli.billauer@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Acked-by: Eli Billauer <eli.billauer@gmail.com>
Link: https://lore.kernel.org/r/20230620143751.578239-18-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now that the driver core allows for struct class to be in read-only
memory, move the icap_class structure to be declared at build time
placing it into read-only memory, instead of having to be dynamically
allocated at load time.
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Michal Simek <michal.simek@amd.com>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: Ivan Orlov <ivan.orlov0322@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Link: https://lore.kernel.org/r/20230620143751.578239-17-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now that the driver core allows for struct class to be in read-only
memory, remove the class field of the ports_driver_data structure and
create the port_class static class structure declared at build time
which places it into read-only memory, instead of having it to be
dynamically allocated at load time.
Cc: Amit Shah <amit@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: virtualization@lists.linux-foundation.org
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Link: https://lore.kernel.org/r/20230620143751.578239-16-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now that the driver core allows for struct class to be in read-only
memory, move the ppdev_class structure to be declared at build time
placing it into read-only memory, instead of having to be dynamically
allocated at load time.
Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Link: https://lore.kernel.org/r/20230620143751.578239-15-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now that the driver core allows for struct class to be in read-only
memory, move the misc_class structure to be declared at build time
placing it into read-only memory, instead of having to be dynamically
allocated at load time.
Cc: Arnd Bergmann <arnd@arndb.de>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Link: https://lore.kernel.org/r/20230620143751.578239-14-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now that the driver core allows for struct class to be in read-only
memory, move the mem_class structure to be declared at build time
placing it into read-only memory, instead of having to be dynamically
allocated at load time.
Cc: Arnd Bergmann <arnd@arndb.de>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Link: https://lore.kernel.org/r/20230620143751.578239-13-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now that the driver core allows for struct class to be in read-only
memory, move the lp_class structure to be declared at build time
placing it into read-only memory, instead of having to be dynamically
allocated at load time.
Cc: Arnd Bergmann <arnd@arndb.de>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Link: https://lore.kernel.org/r/20230620143751.578239-12-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now that the driver core allows for struct class to be in read-only
memory, move the dsp56k_class structure to be declared at build time
placing it into read-only memory, instead of having to be dynamically
allocated at boot time.
Cc: Arnd Bergmann <arnd@arndb.de>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Link: https://lore.kernel.org/r/20230620143751.578239-11-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now that the driver core allows for struct class to be in read-only
memory, move the bsr_class structure to be declared at build time
placing it into read-only memory, instead of having to be dynamically
allocated at boot time.
Cc: Arnd Bergmann <arnd@arndb.de>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Link: https://lore.kernel.org/r/20230620143751.578239-10-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
SIMPLE_DEV_PM_OPS is deprecated, replace it with DEFINE_SIMPLE_DEV_PM_OPS
and use pm_sleep_ptr for setting the driver's pm routines. We can now
remove the __maybe_unused qualifier in the suspend and resume functions.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The st-rng driver uses devres to register itself with the hwrng core,
the driver will be unregistered from hwrng when its device goes out of
scope. This happens after the driver's remove function is called.
However, st-rng's clock is disabled in the remove function. There's a
short timeframe where st-rng is still registered with the hwrng core
although its clock is disabled. I suppose the clock must be active to
access the hardware and serve requests from the hwrng core.
Switch to devm_clk_get_enabled and let devres disable the clock and
unregister the hwrng. This avoids the race condition.
Fixes: 3e75241be8 ("hwrng: drivers - Use device-managed registration API")
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Allow compile-testing the st-rng driver if we're not running on an ST
chipset.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fix the timeout that is used for the initialisation and for the self
test. wait_for_completion_timeout expects a timeout in jiffies, but
RNGC_TIMEOUT is in milliseconds. Call msecs_to_jiffies to do the
conversion.
Cc: stable@vger.kernel.org
Fixes: 1d5449445b ("hwrng: mx-rngc - add a driver for Freescale RNGC")
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Michal Simek <michal.simek@amd.com>
Message-ID: <20230605092047.50472-3-u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
hwicap_drv_remove() is only called for a device after hwicap_drv_probe()
returned 0. In that case dev_set_drvdata() was called (by hwicap_setup())
with a non-NULL value and so dev_get_drvdata() won't return NULL.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Michal Simek <michal.simek@amd.com>
Message-ID: <20230605092047.50472-2-u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
hwicap_remove() is only called by hwicap_drv_remove(). Simplify by
unrolling the former into the latter function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Michal Simek <michal.simek@amd.com>
Message-ID: <20230605092047.50472-1-u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The unxlate_dev_mem_ptr() function has no prototype on the mips
architecture, which does not include asm-generic/io.h, so gcc warns
about the __weak definition:
drivers/char/mem.c:94:29: error: no previous prototype for 'unxlate_dev_mem_ptr' [-Werror=missing-prototypes]
Since everyone else already gets the generic definition or has a custom
one, there is not really much point in having a __weak version as well.
Remove this one, and instead add a trivial macro to the mips header.
Once we convert mips to use the asm-generic header, this can go away
again.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
With commit 858e8b792d ("tpm, tpm_tis: Avoid cache incoherency in test
for interrupts") bit accessor functions are used to access flags in
tpm_tis_data->flags.
However these functions expect bit numbers, while the flags are defined
as bit masks in enum tpm_tis_flag.
Fix this inconsistency by using numbers instead of masks also for the
flags in the enum.
Reported-by: Pavel Machek <pavel@denx.de>
Fixes: 858e8b792d ("tpm, tpm_tis: Avoid cache incoherency in test for interrupts")
Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>
Cc: stable@vger.kernel.org
Reviewed-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The way random data is read from hardware has changed from
Octeon CN10KA-B0 and later SoCs onwards. A new set of registers
have been added to read random data and to verify whether the
read data is valid or not. This patch extends and uses
RNM_PF_TRNG_DAT and RNM_PF_TRNG_STS CSRs to read random number
and status for the applicable silicon variants.
Signed-off-by: Bharat Bhushan <bbhushan2@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
not being declared. We thus need to add HAS_IOPORT as dependency for
those drivers using them.
Co-developed-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Link: https://lore.kernel.org/r/20230522105049.1467313-4-schnelle@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- Fix flush_dcache_page() for usage from irq context
- Handle kprobes breakpoints only in kernel context
- Handle kgdb breakpoints only in kernel context
- Use num_present_cpus() in alternative patching code
- Enable LOCKDEP support
- Add lightweight spinlock checks
- Flush AGP gatt writes and adjust gatt mask in parisc_agp_mask_memory()
- Allow to reboot machine after system halt
- Improve cache flushing for PCXL in arch_sync_dma_for_cpu()
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZG/QkgAKCRD3ErUQojoP
X9MBAQCe2rJxNPmdUVZ8okvKTE/qukbJxa+pSlYm/+w5s4Q6nAD/TCBM5Meil0Q2
IOYAadCt4qaZfCOcIHBOgRqrnLXUbQQ=
=e2J6
-----END PGP SIGNATURE-----
Merge tag 'parisc-for-6.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc architecture fixes from Helge Deller:
"Quite a bunch of real bugfixes in here and most of them are tagged for
backporting: A fix for cache flushing from irq context, a kprobes &
kgdb breakpoint handling fix, and a fix in the alternative code
patching function to take care of CPU hotplugging.
parisc now provides LOCKDEP support and comes with a lightweight
spinlock check. Both features helped me to find the cache flush bug.
Additionally writing the AGP gatt has been fixed, the machine allows
the user to reboot after a system halt and arch_sync_dma_for_cpu() has
been optimized for PCXL PCUs.
Summary:
- Fix flush_dcache_page() for usage from irq context
- Handle kprobes breakpoints only in kernel context
- Handle kgdb breakpoints only in kernel context
- Use num_present_cpus() in alternative patching code
- Enable LOCKDEP support
- Add lightweight spinlock checks
- Flush AGP gatt writes and adjust gatt mask in parisc_agp_mask_memory()
- Allow to reboot machine after system halt
- Improve cache flushing for PCXL in arch_sync_dma_for_cpu()"
* tag 'parisc-for-6.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Fix flush_dcache_page() for usage from irq context
parisc: Handle kgdb breakpoints only in kernel context
parisc: Handle kprobes breakpoints only in kernel context
parisc: Allow to reboot machine after system halt
parisc: Enable LOCKDEP support
parisc: Add lightweight spinlock checks
parisc: Use num_present_cpus() in alternative patching code
parisc: Flush gatt writes and adjust gatt mask in parisc_agp_mask_memory()
parisc: Improve cache flushing for PCXL in arch_sync_dma_for_cpu()
Use copy_splice_read() for tty, procfs, kernfs and random files rather
than going through generic_file_splice_read() as they just copy the file
into the output buffer and don't splice pages. This avoids the need for
them to have a ->read_folio() to satisfy filemap_splice_read().
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
cc: Christoph Hellwig <hch@lst.de>
cc: Jens Axboe <axboe@kernel.dk>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: John Hubbard <jhubbard@nvidia.com>
cc: David Hildenbrand <david@redhat.com>
cc: Matthew Wilcox <willy@infradead.org>
cc: Miklos Szeredi <miklos@szeredi.hu>
cc: Arnd Bergmann <arnd@arndb.de>
cc: linux-block@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
Link: https://lore.kernel.org/r/20230522135018.2742245-13-dhowells@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We have no device-specific data for fsl,imx25-rngb. There's no need to
set .data = NULL, this is the default.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Mark the imx_rngc_probe function as __init.
There's no need to support hotplugging in the imx-rngc driver. We use
module_platform_driver_probe, the probe function will only be called at
startup.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Rewrite the defines for register bits to use BIT(x) instead of writing
out the 32-bit number. This makes it easier to compare the code with the
register descriptions in the reference manual.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use the mechanism from bitfield.h to read the rng type field in the
version_id register. This makes the code a tiny bit simpler.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The "level" field in the status register contains the number of random
bytes that are available in the FIFO. Use GENMASK to extract this field.
We only want to check if level is 0 or if we can read another byte.
There's no need for the shift or the level variable.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Interrupts got recently enabled for tpm_tis.
The interrupts initially works on the device but they will stop arriving
after circa ~200 interrupts. On system reboot/shutdown this will cause a
long wait (120000 jiffies).
[jarkko@kernel.org: fix a merge conflict and adjust the commit message]
Fixes: e644b2f498 ("tpm, tpm_tis: Enable interrupt test")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
