Commit graph

1779 commits

Author SHA1 Message Date
John W. Linville
777bf135b7 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
John W. Linville says:

====================
Please pull these fixes intended for 3.6.  There are more commits
here than I would like -- I got a bit behind while I was stalking
Steven Rostedt in San Diego last week...  I'll slow it down after this!

There are a couple of pulls here.  One is from Johannes:

"Please pull (according to the below information) to get a few fixes.

 * a fix to properly disconnect in the driver when authentication or
   association fails
 * a fix to prevent invalid information about mesh paths being reported
   to userspace
 * a memory leak fix in an nl80211 error path"

The other comes via Gustavo:

"A few updates for the 3.6 kernel. There are two btusb patches to add
more supported devices through the new USB_VENDOR_AND_INTEFACE_INFO()
macro and another one that add a new device id for a Sony Vaio laptop,
one fix for a user-after-free and, finally, two patches from Vinicius
to fix a issue in SMP pairing."

Along with those...

Arend van Spriel provides a fix for a use-after-free bug in brcmfmac.

Daniel Drake avoids a hang by not trying to touch the libertas hardware
duing suspend if it is already powered-down.

Felix Fietkau provides a batch of ath9k fixes that adress some
potential problems with power settings, as well as a fix to avoid a
potential interrupt storm.

Gertjan van Wingerde provides a register-width fix for rt2x00, and
a rt2x00 fix to prevent incorrectly detecting the rfkill status.
He also provides a device ID patch.

Hante Meuleman gives us three brcmfmac fixes, one that properly
initializes a command structure, one that fixes a race condition that
could lose usb requests, and one that removes some log spam.

Marc Kleine-Budde offers an rt2x00 fix for a voltage setting on some
specific devices.

Mohammed Shafi Shajakhan sent an ath9k fix to avoid a crash related to
using timers that aren't allocated when 2 wire bluetooth coexistence
hardware is in use.

Sergei Poselenov changes rt2800usb to do some validity checking for
received packets, avoiding crashes on an ARM Soc.

Stone Piao gives us an mwifiex fix for an incorrectly set skb length
value for a command buffer.

All of these are localized to their specific drivers, and relatively
small.  The power-related patches from Felix are bigger than I would
like, but I merged them in consideration of their isolation to ath9k
and the sensitive nature of power settings in wireless devices.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-07 14:38:50 -04:00
Vinicius Costa Gomes
d8343f1257 Bluetooth: Fix sending a HCI Authorization Request over LE links
In the case that the link is already in the connected state and a
Pairing request arrives from the mgmt interface, hci_conn_security()
would be called but it was not considering LE links.

Reported-by: João Paulo Rechi Vita <jprvita@openbossa.org>
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-08-27 08:11:51 -07:00
Vinicius Costa Gomes
cc110922da Bluetooth: Change signature of smp_conn_security()
To make it clear that it may be called from contexts that may not have
any knowledge of L2CAP, we change the connection parameter, to receive
a hci_conn.

This also makes it clear that it is checking the security of the link.

Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-08-27 08:07:18 -07:00
Mathias Krause
792039c73c Bluetooth: L2CAP - Fix info leak via getsockname()
The L2CAP code fails to initialize the l2_bdaddr_type member of struct
sockaddr_l2 and the padding byte added for alignment. It that for leaks
two bytes kernel stack via the getsockname() syscall. Add an explicit
memset(0) before filling the structure to avoid the info leak.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Johan Hedberg <johan.hedberg@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-15 21:36:31 -07:00
Mathias Krause
9344a97296 Bluetooth: RFCOMM - Fix info leak via getsockname()
The RFCOMM code fails to initialize the trailing padding byte of struct
sockaddr_rc added for alignment. It that for leaks one byte kernel stack
via the getsockname() syscall. Add an explicit memset(0) before filling
the structure to avoid the info leak.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Johan Hedberg <johan.hedberg@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-15 21:36:31 -07:00
Mathias Krause
f9432c5ec8 Bluetooth: RFCOMM - Fix info leak in ioctl(RFCOMMGETDEVLIST)
The RFCOMM code fails to initialize the two padding bytes of struct
rfcomm_dev_list_req inserted for alignment before copying it to
userland. Additionally there are two padding bytes in each instance of
struct rfcomm_dev_info. The ioctl() that for disclosures two bytes plus
dev_num times two bytes uninitialized kernel heap memory.

Allocate the memory using kzalloc() to fix this issue.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Johan Hedberg <johan.hedberg@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-15 21:36:30 -07:00
Mathias Krause
9ad2de43f1 Bluetooth: RFCOMM - Fix info leak in getsockopt(BT_SECURITY)
The RFCOMM code fails to initialize the key_size member of struct
bt_security before copying it to userland -- that for leaking one
byte kernel stack. Initialize key_size with 0 to avoid the info
leak.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Johan Hedberg <johan.hedberg@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-15 21:36:30 -07:00
Mathias Krause
3f68ba07b1 Bluetooth: HCI - Fix info leak via getsockname()
The HCI code fails to initialize the hci_channel member of struct
sockaddr_hci and that for leaks two bytes kernel stack via the
getsockname() syscall. Initialize hci_channel with 0 to avoid the
info leak.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Johan Hedberg <johan.hedberg@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-15 21:36:30 -07:00
Mathias Krause
e15ca9a0ef Bluetooth: HCI - Fix info leak in getsockopt(HCI_FILTER)
The HCI code fails to initialize the two padding bytes of struct
hci_ufilter before copying it to userland -- that for leaking two
bytes kernel stack. Add an explicit memset(0) before filling the
structure to avoid the info leak.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Johan Hedberg <johan.hedberg@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-15 21:36:30 -07:00
Andre Guedes
61a0cfb008 Bluetooth: Fix use-after-free bug in SMP
If SMP fails, we should always cancel security_timer delayed work.
Otherwise, security_timer function may run after l2cap_conn object
has been freed.

This patch fixes the following warning reported by ODEBUG:

WARNING: at lib/debugobjects.c:261 debug_print_object+0x7c/0x8d()
Hardware name: Bochs
ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x27
Modules linked in: btusb bluetooth
Pid: 440, comm: kworker/u:2 Not tainted 3.5.0-rc1+ #4
Call Trace:
 [<ffffffff81174600>] ? free_obj_work+0x4a/0x7f
 [<ffffffff81023eb8>] warn_slowpath_common+0x7e/0x97
 [<ffffffff81023f65>] warn_slowpath_fmt+0x41/0x43
 [<ffffffff811746b1>] debug_print_object+0x7c/0x8d
 [<ffffffff810394f0>] ? __queue_work+0x241/0x241
 [<ffffffff81174fdd>] debug_check_no_obj_freed+0x92/0x159
 [<ffffffff810ac08e>] slab_free_hook+0x6f/0x77
 [<ffffffffa0019145>] ? l2cap_conn_del+0x148/0x157 [bluetooth]
 [<ffffffff810ae408>] kfree+0x59/0xac
 [<ffffffffa0019145>] l2cap_conn_del+0x148/0x157 [bluetooth]
 [<ffffffffa001b9a2>] l2cap_recv_frame+0xa77/0xfa4 [bluetooth]
 [<ffffffff810592f9>] ? trace_hardirqs_on_caller+0x112/0x1ad
 [<ffffffffa001c86c>] l2cap_recv_acldata+0xe2/0x264 [bluetooth]
 [<ffffffffa0002b2f>] hci_rx_work+0x235/0x33c [bluetooth]
 [<ffffffff81038dc3>] ? process_one_work+0x126/0x2fe
 [<ffffffff81038e22>] process_one_work+0x185/0x2fe
 [<ffffffff81038dc3>] ? process_one_work+0x126/0x2fe
 [<ffffffff81059f2e>] ? lock_acquired+0x1b5/0x1cf
 [<ffffffffa00028fa>] ? le_scan_work+0x11d/0x11d [bluetooth]
 [<ffffffff81036fb6>] ? spin_lock_irq+0x9/0xb
 [<ffffffff81039209>] worker_thread+0xcf/0x175
 [<ffffffff8103913a>] ? rescuer_thread+0x175/0x175
 [<ffffffff8103cfe0>] kthread+0x95/0x9d
 [<ffffffff812c5054>] kernel_threadi_helper+0x4/0x10
 [<ffffffff812c36b0>] ? retint_restore_args+0x13/0x13
 [<ffffffff8103cf4b>] ? flush_kthread_worker+0xdb/0xdb
 [<ffffffff812c5050>] ? gs_change+0x13/0x13

This bug can be reproduced using hctool lecc or l2test tools and
bluetoothd not running.

Signed-off-by: Andre Guedes <andre.guedes@openbossa.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-08-15 01:06:23 -03:00
Jaganath Kanakkassery
49dfbb9129 Bluetooth: Fix socket not getting freed if l2cap channel create fails
If l2cap_chan_create() fails then it will return from l2cap_sock_kill
since zapped flag of sk is reset.

Signed-off-by: Jaganath Kanakkassery <jaganath.k@samsung.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-08-06 15:19:37 -03:00
Andrei Emeltchenko
d08fd0e712 Bluetooth: smp: Fix possible NULL dereference
smp_chan_create might return NULL so we need to check before
dereferencing smp.

Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-08-06 15:19:37 -03:00
Ram Malovany
c3e7c0d90b Bluetooth: Set name_state to unknown when entry name is empty
When the name of the given entry is empty , the state needs to be
updated accordingly.

Cc: stable@vger.kernel.org
Signed-off-by: Ram Malovany <ramm@ti.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-08-06 15:19:36 -03:00
Ram Malovany
7cc8380eb1 Bluetooth: Fix using a NULL inquiry cache entry
If the device was not found in a list of found devices names of which
are pending.This may happen in a case when HCI Remote Name Request
was sent as a part of incoming connection establishment procedure.
Hence there is no need to continue resolving a next name as it will
be done upon receiving another Remote Name Request Complete Event.
This will fix a kernel crash when trying to use this entry to resolve
the next name.

Cc: stable@vger.kernel.org
Signed-off-by: Ram Malovany <ramm@ti.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-08-06 15:19:36 -03:00
Ram Malovany
c810089c27 Bluetooth: Fix using NULL inquiry entry
If entry wasn't found in the hci_inquiry_cache_lookup_resolve do not
resolve the name.This will fix a kernel crash when trying to use NULL
pointer.

Cc: stable@vger.kernel.org
Signed-off-by: Ram Malovany <ramm@ti.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-08-06 15:19:36 -03:00
Szymon Janc
a9ea3ed9b7 Bluetooth: Fix legacy pairing with some devices
Some devices e.g. some Android based phones don't do SDP search before
pairing and cancel legacy pairing when ACL is disconnected.

PIN Code Request event which changes ACL timeout to HCI_PAIRING_TIMEOUT
is only received after remote user entered PIN.

In that case no L2CAP is connected so default HCI_DISCONN_TIMEOUT
(2 seconds) is being used to timeout ACL connection. This results in
problems with legacy pairing as remote user has only few seconds to
enter PIN before ACL is disconnected.

Increase disconnect timeout for incomming connection to
HCI_PAIRING_TIMEOUT if SSP is disabled and no linkey exists.

To avoid keeping ACL alive for too long after SDP search set ACL
timeout back to HCI_DISCONN_TIMEOUT when L2CAP is connected.

2012-07-19 13:24:43.413521 < HCI Command: Create Connection (0x01|0x0005) plen 13
    bdaddr 00:02:72:D6:6A:3F ptype 0xcc18 rswitch 0x01 clkoffset 0x0000
    Packet type: DM1 DM3 DM5 DH1 DH3 DH5
2012-07-19 13:24:43.425224 > HCI Event: Command Status (0x0f) plen 4
    Create Connection (0x01|0x0005) status 0x00 ncmd 1
2012-07-19 13:24:43.885222 > HCI Event: Role Change (0x12) plen 8
    status 0x00 bdaddr 00:02:72:D6:6A:3F role 0x01
    Role: Slave
2012-07-19 13:24:44.054221 > HCI Event: Connect Complete (0x03) plen 11
    status 0x00 handle 42 bdaddr 00:02:72:D6:6A:3F type ACL encrypt 0x00
2012-07-19 13:24:44.054313 < HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2
    handle 42
2012-07-19 13:24:44.055176 > HCI Event: Page Scan Repetition Mode Change (0x20) plen 7
    bdaddr 00:02:72:D6:6A:3F mode 0
2012-07-19 13:24:44.056217 > HCI Event: Max Slots Change (0x1b) plen 3
    handle 42 slots 5
2012-07-19 13:24:44.059218 > HCI Event: Command Status (0x0f) plen 4
    Read Remote Supported Features (0x01|0x001b) status 0x00 ncmd 0
2012-07-19 13:24:44.062192 > HCI Event: Command Status (0x0f) plen 4
    Unknown (0x00|0x0000) status 0x00 ncmd 1
2012-07-19 13:24:44.067219 > HCI Event: Read Remote Supported Features (0x0b) plen 11
    status 0x00 handle 42
    Features: 0xbf 0xfe 0xcf 0xfe 0xdb 0xff 0x7b 0x87
2012-07-19 13:24:44.067248 < HCI Command: Read Remote Extended Features (0x01|0x001c) plen 3
    handle 42 page 1
2012-07-19 13:24:44.071217 > HCI Event: Command Status (0x0f) plen 4
    Read Remote Extended Features (0x01|0x001c) status 0x00 ncmd 1
2012-07-19 13:24:44.076218 > HCI Event: Read Remote Extended Features (0x23) plen 13
    status 0x00 handle 42 page 1 max 1
    Features: 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00
2012-07-19 13:24:44.076249 < HCI Command: Remote Name Request (0x01|0x0019) plen 10
    bdaddr 00:02:72:D6:6A:3F mode 2 clkoffset 0x0000
2012-07-19 13:24:44.081218 > HCI Event: Command Status (0x0f) plen 4
    Remote Name Request (0x01|0x0019) status 0x00 ncmd 1
2012-07-19 13:24:44.105214 > HCI Event: Remote Name Req Complete (0x07) plen 255
    status 0x00 bdaddr 00:02:72:D6:6A:3F name 'uw000951-0'
2012-07-19 13:24:44.105284 < HCI Command: Authentication Requested (0x01|0x0011) plen 2
    handle 42
2012-07-19 13:24:44.111207 > HCI Event: Command Status (0x0f) plen 4
    Authentication Requested (0x01|0x0011) status 0x00 ncmd 1
2012-07-19 13:24:44.112220 > HCI Event: Link Key Request (0x17) plen 6
    bdaddr 00:02:72:D6:6A:3F
2012-07-19 13:24:44.112249 < HCI Command: Link Key Request Negative Reply (0x01|0x000c) plen 6
    bdaddr 00:02:72:D6:6A:3F
2012-07-19 13:24:44.115215 > HCI Event: Command Complete (0x0e) plen 10
    Link Key Request Negative Reply (0x01|0x000c) ncmd 1
    status 0x00 bdaddr 00:02:72:D6:6A:3F
2012-07-19 13:24:44.116215 > HCI Event: PIN Code Request (0x16) plen 6
    bdaddr 00:02:72:D6:6A:3F
2012-07-19 13:24:48.099184 > HCI Event: Auth Complete (0x06) plen 3
    status 0x13 handle 42
    Error: Remote User Terminated Connection
2012-07-19 13:24:48.179182 > HCI Event: Disconn Complete (0x05) plen 4
    status 0x00 handle 42 reason 0x13
    Reason: Remote User Terminated Connection

Cc: stable@vger.kernel.org
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
Acked-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-08-06 15:19:36 -03:00
Gustavo Padovan
269c4845d5 Bluetooth: Fix possible deadlock in SCO code
sco_chan_del() only has conn != NULL when called from sco_conn_del() so
just move the code from it that deal with conn to sco_conn_del().

[  120.765529]
[  120.765529] ======================================================
[  120.766529] [ INFO: possible circular locking dependency detected ]
[  120.766529] 3.5.0-rc1-10292-g3701f94-dirty #70 Tainted: G        W
[  120.766529] -------------------------------------------------------
[  120.766529] kworker/u:3/1497 is trying to acquire lock:
[  120.766529]  (&(&conn->lock)->rlock#2){+.+...}, at:
[<ffffffffa00b7ecc>] sco_chan_del+0x4c/0x170 [bluetooth]
[  120.766529]
[  120.766529] but task is already holding lock:
[  120.766529]  (slock-AF_BLUETOOTH-BTPROTO_SCO){+.+...}, at:
[<ffffffffa00b8401>] sco_conn_del+0x61/0xe0 [bluetooth]
[  120.766529]
[  120.766529] which lock already depends on the new lock.
[  120.766529]
[  120.766529]
[  120.766529] the existing dependency chain (in reverse order) is:
[  120.766529]
[  120.766529] -> #1 (slock-AF_BLUETOOTH-BTPROTO_SCO){+.+...}:
[  120.766529]        [<ffffffff8107980e>] lock_acquire+0x8e/0xb0
[  120.766529]        [<ffffffff813c19e0>] _raw_spin_lock+0x40/0x80
[  120.766529]        [<ffffffffa00b85e9>] sco_connect_cfm+0x79/0x300
[bluetooth]
[  120.766529]        [<ffffffffa0094b13>]
hci_sync_conn_complete_evt.isra.90+0x343/0x400 [bluetooth]
[  120.766529]        [<ffffffffa009d447>] hci_event_packet+0x317/0xfb0
[bluetooth]
[  120.766529]        [<ffffffffa008aa68>] hci_rx_work+0x2c8/0x890
[bluetooth]
[  120.766529]        [<ffffffff81047db7>] process_one_work+0x197/0x460
[  120.766529]        [<ffffffff810489d6>] worker_thread+0x126/0x2d0
[  120.766529]        [<ffffffff8104ee4d>] kthread+0x9d/0xb0
[  120.766529]        [<ffffffff813c4294>] kernel_thread_helper+0x4/0x10
[  120.766529]
[  120.766529] -> #0 (&(&conn->lock)->rlock#2){+.+...}:
[  120.766529]        [<ffffffff81078a8a>] __lock_acquire+0x154a/0x1d30
[  120.766529]        [<ffffffff8107980e>] lock_acquire+0x8e/0xb0
[  120.766529]        [<ffffffff813c19e0>] _raw_spin_lock+0x40/0x80
[  120.766529]        [<ffffffffa00b7ecc>] sco_chan_del+0x4c/0x170
[bluetooth]
[  120.766529]        [<ffffffffa00b8414>] sco_conn_del+0x74/0xe0
[bluetooth]
[  120.766529]        [<ffffffffa00b88a2>] sco_disconn_cfm+0x32/0x60
[bluetooth]
[  120.766529]        [<ffffffffa0093a82>]
hci_disconn_complete_evt.isra.53+0x242/0x390 [bluetooth]
[  120.766529]        [<ffffffffa009d747>] hci_event_packet+0x617/0xfb0
[bluetooth]
[  120.766529]        [<ffffffffa008aa68>] hci_rx_work+0x2c8/0x890
[bluetooth]
[  120.766529]        [<ffffffff81047db7>] process_one_work+0x197/0x460
[  120.766529]        [<ffffffff810489d6>] worker_thread+0x126/0x2d0
[  120.766529]        [<ffffffff8104ee4d>] kthread+0x9d/0xb0
[  120.766529]        [<ffffffff813c4294>] kernel_thread_helper+0x4/0x10
[  120.766529]
[  120.766529] other info that might help us debug this:
[  120.766529]
[  120.766529]  Possible unsafe locking scenario:
[  120.766529]
[  120.766529]        CPU0                    CPU1
[  120.766529]        ----                    ----
[  120.766529]   lock(slock-AF_BLUETOOTH-BTPROTO_SCO);
[  120.766529]
lock(&(&conn->lock)->rlock#2);
[  120.766529]
lock(slock-AF_BLUETOOTH-BTPROTO_SCO);
[  120.766529]   lock(&(&conn->lock)->rlock#2);
[  120.766529]
[  120.766529]  *** DEADLOCK ***

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-08-06 15:19:36 -03:00
John W. Linville
90b90f60c4 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem 2012-07-20 12:30:48 -04:00
Johan Hedberg
83ce9a06b5 Bluetooth: Change page scan interval in fast connectable mode
This patch is based on a user space (hciops) patch which never made it
upstream but does make sense to include in the mgmt part of the kernel.

(User space) commit message from Dmitriy Paliy:
"
Page scan interval in fast connectable mode is changed from 22.5 msec to
160 msec to perform less aggressive page scanning. This is done
accordingly to controller vendor recommendation.

Primary concern is that current parameters 22.5 interval, 11.25 window,
and interleaved scanning occupy whole radio bandwidth. Changing interval
to 160 msec should be sufficient for both speeding up connection
establishment and leaving space for other activities, like inquiry scan,
e.g.
"

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-07-16 10:50:11 -03:00
Mat Martineau
c20f8e35ca Bluetooth: Use tx window from config response for ack timing
This change addresses an L2CAP ERTM throughput problem when a remote
device does not fully utilize the available transmit window.

The L2CAP ERTM transmit window size determines the maximum number of
unacked frames that may be outstanding at any time. It is configured
separately for each direction of an ERTM connection. Each side sends a
configuration request with a tx_win field indicating how many unacked
frames it is capable of receiving before sending an ack. The
configuration response's tx_win field shows how many frames the
transmitter will actually send before waiting for an ack.

It's important to trace both the actual transmit window (to check for
validity of incoming frames) and the number of frames that the
transmitter will send before waiting (to send acks at the appropriate
time). Now there are separate tx_win and ack_win values. ack_win is
updated based on configuration responses, and is used to determine
when acks are sent.

Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-07-15 12:18:29 -03:00
Andrei Emeltchenko
a0dfe0ab6b Bluetooth: debug: Print amp_mgr refcnt
Improve debug output.

Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-07-11 10:09:37 -03:00
Andrei Emeltchenko
9f1db00cdc Bluetooth: debug: Use standard hex object specifiers in hci_event
To help debugging printed hex object use standard bluetooth
specifiers in hci_event. The patch changes format from 0x%04x to 0x%4.4x;
print manufacturer id and handle in hex instead of int; print opcode
always in 0x%4.4x format; status in 0x%2.2x.

Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-07-11 09:56:03 -03:00
Andrei Emeltchenko
89d8b40789 Bluetooth: debug: Add debug to l2cap_security_cfm
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-07-10 15:42:07 -03:00
Andrei Emeltchenko
ad0ac6ca5f Bluetooth: debug: Print CID and PSM in hex format
Correct places where CID and PSM were printed as int. For CID: 0x%4.4x
is used and for PSM: 0x%2.2x.

Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-07-10 15:41:50 -03:00
Andrei Emeltchenko
b44006728d Bluetooth: debug: Correct types specifiers for L2CAP
Avoid unneeded type conversion by correcting type specifiers in debug
statements for L2CAP.

Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-07-10 15:40:50 -03:00
Andrei Emeltchenko
2104786b42 Bluetooth: debug: Add printing num of cmds queued
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-07-10 15:35:27 -03:00
Jaganath Kanakkassery
afeb019d0a Bluetooth: Refactor PIN code rejection to use user_pairing_resp()
Reuse user_pairing_resp() to send PIN code negative reply

Signed-off-by: Jaganath Kanakkassery <jaganath.k@samsung.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-07-10 15:26:21 -03:00
Andrei Emeltchenko
ce2be9acff Bluetooth: Do not auto off AMP controller
Since AMP controller is not managed by user space do not shut it down.

Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-06-30 12:35:49 -03:00
Andrei Emeltchenko
d300fa9b14 Bluetooth: Route traffic only through BR/EDR controller
If AMP controller is first in the list then Bluetooth traffic might
be routed through it (if source is not specified). The patch
prevents this case and also checks that source is BR/EDR.

Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-06-30 12:15:32 -03:00
Andrei Emeltchenko
38b3fef173 Bluetooth: Improve debugging messages for hci_conn
Improve debugging of hci_conn objects by: adding print to hci_conn
refcounting, adding object spcifier when missing, change conn to hcon
since conn is heavily used for l2cap_conn objects and this is misleading.

Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-06-30 11:41:24 -03:00
David S. Miller
b26d344c6b Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/caif/caif_hsi.c
	drivers/net/usb/qmi_wwan.c

The qmi_wwan merge was trivial.

The caif_hsi.c, on the other hand, was not.  It's a conflict between
1c385f1fdf ("caif-hsi: Replace platform
device with ops structure.") in the net-next tree and commit
39abbaef19 ("caif-hsi: Postpone init of
HIS until open()") in the net tree.

I did my best with that one and will ask Sjur to check it out.

Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-28 17:37:00 -07:00
Linus Torvalds
f3747e2f2c Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking update from David Miller:

 1) Pairing and deadlock fixes in bluetooth from Johan Hedberg.

 2) Add device IDs for AR3011 and AR3012 bluetooth chips.  From
    Giancarlo Formicuccia and Marek Vasut.

 3) Fix wireless regulatory deadlock, from Eliad Peller.

 4) Fix full TX ring panic in bnx2x driver, from Eric Dumazet.

 5) Revert the two commits that added skb_orphan_try(), it causes
    erratic bonding behavior with UDP clients and the gains it used to
    give are mostly no longer happening due to how BQL works.  From Eric
    Dumazet.

 6) It took two tries, but Thomas Graf fixed a problem wherein we
    registered ipv6 routing procfs files before their backend data were
    initialized properly.

 7) Fix max GSO size setting in be2net, from Sarveshwar Bandi.

 8) PHY device id mask is wrong for KSZ9021 and KS8001 chips, fix from
    Jason Wang.

 9) Fix use of stale SKB data pointer after skb_linearize() call in
    batman-adv, from Antonio Quartulli.

10) Fix memory leak in IXGBE due to missing __GFP_COMP, from Alexander
    Duyck.

11) Fix probing of Gobi devices in qmi_wwan usbnet driver, from Bjørn
    Mork.

12) Fix suspend/resume and open failure handling in usbnet from Ming
    Lei.

13) Attempt to fix device r8169 hangs for certain chips, from Francois
    Romieu.

14) Fix advancement of RX dirty pointer in some situations in sh_eth
    driver, from Yoshihiro Shimoda.

15) Attempt to fix restart of IPV6 routing table dumps when there is an
    intervening table update.  From Eric Dumazet.

16) Respect security_inet_conn_request() return value in ipv6 TCP.  From
    Neal Cardwell.

17) Add another iPAD device ID to ipheth driver, from Davide Gerhard.

18) Fix access to freed SKB in l2tp_eth_dev_xmit(), and fix l2tp lockdep
    splats, from Eric Dumazet.

19) Make sure all bridge devices, regardless of whether they were
    created via netlink or ioctls, have their rtnetlink ops hooked up.
    From Thomas Graf and Stephen Hemminger.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (81 commits)
  9p: fix min_t() casting in p9pdu_vwritef()
  can: flexcan: use be32_to_cpup to handle the value of dt entry
  xen/netfront: teardown the device before unregistering it.
  bridge: Assign rtnl_link_ops to bridge devices created via ioctl (v2)
  vhost: use USER_DS in vhost_worker thread
  ixgbe: Do not pad FCoE frames as this can cause issues with FCoE DDP
  net: l2tp_eth: use LLTX to avoid LOCKDEP splats
  mac802154: add missed braces
  net: l2tp_eth: fix l2tp_eth_dev_xmit race
  net/mlx4_en: Release QP range in free_resources
  net/mlx4: Use single completion vector after NOP failure
  net/mlx4_en: Set correct port parameters during device initialization
  ipheth: add support for iPad
  caif-hsi: Add missing return in error path
  caif-hsi: Bugfix - Piggyback'ed embedded CAIF frame lost
  caif: Clear shutdown mask to zero at reconnect.
  tcp: heed result of security_inet_conn_request() in tcp_v6_conn_request()
  ipv6: fib: fix fib dump restart
  batman-adv: fix race condition in TT full-table replacement
  batman-adv: only drop packets of known wifi clients
  ...
2012-06-28 11:20:31 -07:00
Linus Torvalds
60d2c25251 Merge branch 'upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
Pull HID fixes from Jiri Kosina:
 "The most important one is a purification of Kconfig for CONFIG_HID;
  the inclusion of HID groups and autoloading didn't leave the Kconfig
  in a really consistent state.  Henrik's patch fixes that.  In addition
  to that, there are two small fixes for logitech and magicmouse
  drivers."

* 'upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: Fix the generic Kconfig options
  HID: magicmouse: Correct report range of major / minor axes
  HID: logitech: don't use stack based dj_report structures
2012-06-26 11:23:41 -07:00
Gustavo Padovan
b82c29d81d Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth 2012-06-26 08:36:30 -07:00
David S. Miller
e486463e82 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/usb/qmi_wwan.c
	net/batman-adv/translation-table.c
	net/ipv6/route.c

qmi_wwan.c resolution provided by Bjørn Mork.

batman-adv conflict is dealing merely with the changes
of global function names to have a proper subsystem
prefix.

ipv6's route.c conflict is merely two side-by-side additions
of network namespace methods.

Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-25 15:50:32 -07:00
Henrik Rydberg
1f41a6a994 HID: Fix the generic Kconfig options
The generic HID driver is obviously not a special driver, so move it
outside of the special drivers menu. Explain the usage and make the
default follow the HID setting. This should simplify migration from
older kernels. While at it, remove the redundant HID_SUPPORT option
and modify the HID and USB_HID entries to better explain the bus
structure.

Reported-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-06-25 17:25:00 +02:00
Andre Guedes
790eff4429 Bluetooth: Use GFP_KERNEL in mgmt events functions
cmd_status, cmd_complete and mgmt_event functions are executed in
process context and they are not called inside atomic sections. Thus,
they should use GFP_KERNEL for memory allocation instead of GFP_ATOMIC.

Signed-off-by: Andre Guedes <aguedespe@gmail.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-06-19 00:53:38 -03:00
Andre Guedes
12b9456502 Bluetooth: Use GFP_KERNEL in mgmt_pending_add
We are allowed to sleep in mgmt_pending_add, so we should use
GFP_KERNEL for memory allocations instead of GFP_ATOMIC.

Signed-off-by: Andre Guedes <aguedespe@gmail.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-06-19 00:53:37 -03:00
Andre Guedes
92c4c20497 Bluetooth: Use GFP_KERNEL in mgmt_handlers
add_uuid and get_connections mgmt_handlers are executed by user
threads running in kernel-mode.

Signed-off-by: Andre Guedes <aguedespe@gmail.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-06-19 00:53:37 -03:00
Andrei Emeltchenko
9345d40c58 Bluetooth: Use AUTO_OFF constant in jiffies
Move AUTO_OFF_TIMEOUT to other constants changing name to
HCI_AUTO_OFF_TIMEOUT and convert to jiffies.

Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-06-19 00:12:37 -03:00
Andrei Emeltchenko
33cef264cd Bluetooth: Fix compile warnings in mgmt
Commit af7985bf85 introduced regression
resulting in complie warnings:

...
net/bluetooth/mgmt.c:3568:27: warning: invalid assignment: |=
net/bluetooth/mgmt.c:3568:27:    left side has type restricted __le32
net/bluetooth/mgmt.c:3568:27:    right side has type int
net/bluetooth/mgmt.c:3570:27: warning: invalid assignment: |=
net/bluetooth/mgmt.c:3570:27:    left side has type restricted __le32
net/bluetooth/mgmt.c:3570:27:    right side has type int
net/bluetooth/mgmt.c:3580:21: warning: cast from restricted __le32
...

Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-06-18 23:55:59 -03:00
Vishal Agarwal
f960727e6c Bluetooth: Fix sending HCI_Disconnect only when connected
HCI_Disconnect should only be sent after connection is established.
If connection is not yet established and HCI_Disconnect is called
then disconnection complete will be received with a handle which
does not exist and hence this event will be ignored.
But as mgmt.c will not receive this event, its variable for pending
command is not cleared.This will result in future Disconnect commands
for that BD Address to be blocked with error busy.

Signed-off-by: Vishal Agarwal <vishal.agarwal@stericsson.com>
Acked-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-06-14 12:19:39 -03:00
John W. Linville
211c17aaee Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
Conflicts:
	drivers/net/wireless/ath/ath9k/main.c
	net/bluetooth/hci_event.c
2012-06-13 15:35:35 -04:00
Andre Guedes
3701f94451 Bluetooth: Remove magic value in disconnect mgmt handler
This patch replaces the magic value of variable 'reason' by the
proper macro.

Signed-off-by: Andre Guedes <andre.guedes@openbossa.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-06-12 23:26:03 -03:00
Jefferson Delfes
af7985bf85 Bluetooth: Fix flags of mgmt_device_found event
Change flags field to matches userspace structure.
This field needs to be converted to little endian before forward it.

Signed-off-by: Jefferson Delfes <jefferson.delfes@openbossa.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-06-12 23:19:21 -03:00
Andrei Emeltchenko
11778716ed Bluetooth: Fix not setting HCI_RESET flag for AMP
Move reset function to common initialization section fixing
not setting HCI_RESET flag for amp_init.

Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-06-12 00:10:31 -03:00
Andrei Emeltchenko
f0e0951007 Bluetooth: Correct debug print specifier for u16 objects
Some functions print u16 objects as "0xc03" others as "0x0c03". Patch
ensures that opcodes printed are the in the same format and consistent
with bluetooth code.

Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-06-12 00:08:54 -03:00
Andrei Emeltchenko
bda4f23a5c Bluetooth: Add opcode to error message
Sometimes HCI command sending timeouts and gives error message without
specifying which command causes error. Patch makes sure that opcode
is printed to help debugging.

Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-06-12 00:07:45 -03:00
Andrei Emeltchenko
5f246e8905 Bluetooth: Update HCI timeouts constants to use msecs_to_jiffies
The HCI constants are always used in form of jiffies. So just
include the conversion from msecs in the define itself. This has the
advantage of making the code where the timeout is used more readable
and avoiding unnecessary conversions.

The patch is similar to commit ba13ccd9 doing the same job for L2CAP

Reported-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-06-12 00:07:05 -03:00
Andrei Emeltchenko
975b91bb17 Bluetooth: Use standard HCI cmd timeout for RESET
Remove magic and use standard HCI cmd timeout

Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-06-12 00:06:19 -03:00