Commit graph

2985 commits

Author SHA1 Message Date
Mark Brown
c70efb8515 Merge remote-tracking branches 'spi/topic/s3c64xx', 'spi/topic/ti-qspi' and 'spi/topic/txx9' into spi-next 2015-11-04 11:02:16 +00:00
Mark Brown
4c84518523 Merge remote-tracking branches 'spi/topic/omap-100k', 'spi/topic/omap-uwire', 'spi/topic/owner', 'spi/topic/pxa' and 'spi/topic/pxa2xx' into spi-next 2015-11-04 11:02:12 +00:00
Mark Brown
fc579056af Merge remote-tracking branches 'spi/topic/fsl-dspi', 'spi/topic/mpc512x', 'spi/topic/mtk', 'spi/topic/oc-tiny' and 'spi/topic/octeon' into spi-next 2015-11-04 11:02:10 +00:00
Mark Brown
8a9e77653f Merge remote-tracking branches 'spi/topic/coldfire' and 'spi/topic/dw' into spi-next 2015-11-04 11:02:09 +00:00
Mark Brown
c2da04dc21 Merge remote-tracking branches 'spi/topic/bcm53xx', 'spi/topic/bcm63xx', 'spi/topic/bfin-sport', 'spi/topic/bfin5xx' and 'spi/topic/bitbang' into spi-next 2015-11-04 11:02:06 +00:00
Mark Brown
076fcb17dd Merge remote-tracking branches 'spi/topic/ath97', 'spi/topic/atmel', 'spi/topic/au1550', 'spi/topic/bcm2835' and 'spi/topic/bcm2835aux' into spi-next 2015-11-04 11:02:04 +00:00
Mark Brown
8c60348575 Merge remote-tracking branch 'spi/topic/doc' into spi-next 2015-11-04 11:02:03 +00:00
Mark Brown
f0a2a049f5 Merge remote-tracking branch 'spi/topic/davinci' into spi-next 2015-11-04 11:02:02 +00:00
Mark Brown
3e7018def4 Merge remote-tracking branch 'spi/topic/core' into spi-next 2015-11-04 11:02:02 +00:00
Mark Brown
5ba838c97b Merge remote-tracking branches 'spi/fix/atmel', 'spi/fix/imx', 'spi/fix/omap2-mcspi', 'spi/fix/ti-qspi' and 'spi/fix/xilinx' into spi-linus 2015-11-04 11:01:58 +00:00
Mark Brown
26cc44f8a3 Merge remote-tracking branch 'spi/fix/core' into spi-linus 2015-11-04 11:01:58 +00:00
Jarkko Nikula
0db642151a spi: pxa2xx: Rework self-initiated platform data creation for non-ACPI
Extend the pxa2xx_spi_acpi_get_pdata() so that it can create platform data
also on platforms that do not support ACPI or if CONFIG_ACPI is not set.
Now it is expected that "pxa2xx-spi" platform device is either created with
explicit platform data or has an ACPI companion device.

However there is only little in pxa2xx_spi_acpi_get_pdata() that is really
dependent on ACPI companion and it can be reworked to cover also cases
where "pxa2xx-spi" device doesn't have ACPI companion and is created
without platform data.

Do this by renaming the pxa2xx_spi_acpi_get_pdata(), moving it outside of
CONFIG_ACPI test and changing a few runtime tests there to support non-ACPI
case. Only port/bus ID setting based on ACPI _UID is dependent on ACPI and
is moved to own function inside CONFIG_ACPI.

Purpose of this to support non-ACPI case for those PCI enumerated compound
devices that integrate both LPSS SPI host controller and integrated DMA
engine under the same PCI ID and which are registered in MFD layer instead
of in spi-pxa2xx-pci.c.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-30 11:18:05 +09:00
Jarkko Nikula
b7c08cf85c spi: pxa2xx: Add support for Intel Broxton
LPSS SPI in Intel Broxton is otherwise the same than in Intel Sunrisepoint
but it supports up to four chip selects per port and has different FIFO
thresholds. Patch adds support for two Broxton SoC variants.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-30 11:18:05 +09:00
Jarkko Nikula
8b136baa58 spi: pxa2xx: Detect number of enabled Intel LPSS SPI chip select signals
SPI capabilities register located in private registers space of newer
Intel LPSS SPI host controllers tell in register bits 12:9 which chip
select signals are enabled.

Use that information for detecting the number of chip selects. For
simplicity we assume chip selects are enabled one after another without
disabled chip selects between. For instance CS0 | CS1 | CS2 but not
CS0 | CS1 | CS3.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-30 11:18:05 +09:00
Jarkko Nikula
d0283eb2db spi: pxa2xx: Add output control for multiple Intel LPSS chip selects
Intel LPSS SPI host controllers in upcoming Intel platforms can have up
to 4 chip selects per port. Extend chip select control in
lpss_ssp_cs_control() by adding a code that selects the active chip
select output prior to changing the state. Detection for number of
enabled chip select signals will be added by another patch.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-30 11:18:05 +09:00
Jarkko Nikula
624ea72ebd spi: pxa2xx: Use LPSS prefix for defines that are Intel LPSS specific
Rename a few defines that are specific to Intel LPSS SPI private
registers with LPSS prefix. It makes easier to distinguish them from
common defines.

Suggested-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-30 11:18:05 +09:00
Yuan Yao
5a60adafb9 spi: Add DSPI support for layerscape family
LS1043a and LS2080A in the Layerscape family also support DSPI, make
DSPI selectable for these hardwares.

Signed-off-by: Yuan Yao <yao.yuan@freescale.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-30 10:25:53 +09:00
Felipe Balbi
e6b5140b70 spi: ti-qspi: improve ->remove() callback
there's no need to call pm_runtime_get_sync()
followed by pm_runtime_put(). We should, instead,
just call pm_runtime_put_sync() and pm_runtime_disable().

Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-30 10:24:57 +09:00
Ricardo Ribalda Delgado
eca37c7c11 spi/spi-xilinx: Fix race condition on last word read
Some users have reported that in polled mode the driver fails randomly
to read the last word of the transfer.

The end condition used for the transmissions (in polled and irq mode)
has been the TX_EMPTY flag. But Lars-Peter Clausen has identified a delay
from the TX_EMPTY to the actual end of the data rx.

I believe that this race condition has not been detected until now
because of the latency added by the IRQ handler or the PCIe bridge.
This bugs affects setups with low latency access to the spi core.

This patch replaces the readout logic:

For all the words, except the last one, the TX_EMPTY flag is used (and
cached).

If !TX_EMPY or is the last word. The status register is read and the
RX_EMPTY flag is used.

The performance is not affected: there is an extra read of the
Status Register, but the readout can start as soon as there is a word
in the buffer.

Reported-by: Edward Kigwana <ekigwana@scires.com>
Initial-fix-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
2015-10-29 09:03:42 +09:00
Andrew F. Davis
3821a065f5 spi: Drop owner assignment from spi_drivers
An spi_driver does not need to set an owner, it will be populated by the
driver core.

Signed-off-by: Andrew F. Davis <afd@ti.com>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-28 10:30:17 +09:00
Andrew F. Davis
ca5d248542 spi: Add THIS_MODULE to spi_driver in SPI core
Add spi_register_driver helper macro that adds THIS_MODULE to
spi_driver for the registering driver. We rename and modify
the existing spi_register_driver to enable this.

Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-28 10:30:12 +09:00
Franklin S Cooper Jr
abeedb0159 spi: Setup the master controller driver before setting the chipselect
SPI controllers may need to be properly setup before chip selects
can be used. Therefore, wait until the spi controller has a chance
to perform their setup procedure before trying to use the chip
select.

This also insures that the chip selects pins are in a good
state before asseting them which otherwise may cause confusion.

Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
Tested-by: Grygorii Strashko <grygorii.strashko@ti.com>
Tested-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-28 09:34:18 +09:00
Andy Shevchenko
d7ef54ca12 spi: dw: replace magic constant by DW_SPI_DR
The offset 0x60 is the offset of the data register defined as DW_SPI_DR in the
header file. Use it.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-28 09:17:48 +09:00
Leilk Liu
37457607ec spi: mediatek: mt8173 spi multiple devices support
mt8173 IC spi HW has 4 gpio group, it's possible to support
max <= 4 slave devices, even mtk spi HW is not congruent to spi core.
1. When a device do a spi_message transfer, spi HW should know
   which pad-group this device is on, and then writes pad-select
   register.
2. Mtk pad-select register just selects which MISO pin HW will
   receive data. For example, pad-select=1(select spi1 pins), HW just
   receives data from spi1 MISO, but it still send waveform to all 4
   group cs/clk/mosi. If cs pin in other groups is still spi mode,
   after spi1 is selected(by active cs pin), devices on other group
   will also be selected.

Signed-off-by: Leilk Liu <leilk.liu@mediatek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-27 13:33:42 +09:00
Leilk Liu
58a984c79a spi: mediatek: handle controller_data in mtk_spi_setup
controller_data is related with device, so move to master->setup
function.

Signed-off-by: Leilk Liu <leilk.liu@mediatek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-27 13:33:42 +09:00
Leilk Liu
79b5d3f24d spi: mediatek: remove mtk_spi_config
mtk_spi_config() and mtk_spi_prepare_message() both initialize
spi register, so remove mtk_spi_config() and init all register
in mtk_spi_prepare_message().

Signed-off-by: Leilk Liu <leilk.liu@mediatek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-27 13:33:41 +09:00
Javier Martinez Canillas
97d56dc682 spi: fix kernel-doc warnings about missing return desc in spi.c
When building docs with make htmldocs, warnings about not having
a description for the return value are reported, i.e:

warning: No description found for return value of 'spi_register_driver'

Fix these by following the kernel-doc conventions explained in
Documentation/kernel-doc-nano-HOWTO.txt.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-24 01:28:35 +09:00
Mark Brown
0dc9631221 Merge branches 'topic/core' and 'topic/stats' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi into spi-doc 2015-10-24 01:28:29 +09:00
Jarkko Nikula
ceb941afa5 spi: pxa2xx: Align a few defines
Add more indentation to define lines for making them aligned with the
longest one. They would look messy after adding more long defines.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-23 08:56:05 +09:00
Jarkko Nikula
0e89721879 spi: pxa2xx: Save other reg_cs_ctrl bits when configuring chip select
Upcoming Intel platforms use LPSS SPI_CS_CONTROL register bits 15:12 for
configuring the chip select polarities. Touch only chip select SW mode and
state bits when enabling the software chip select control in order to not
clear any other bits in the register.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-23 08:56:05 +09:00
Jarkko Nikula
3b8b6d0594 spi: pxa2xx: Convert unique ID string of ACPI device as unsigned integer
Andy noticed numeric unique device ID is unsigned integer so convert it
using kstrtouint(). Actually integer in ACPI 2.0 and later is 64 bits
litte-endian unsigned integer but quite certainly having so big value here
would mean something extra than just the SPI bus number so it won't hurt to
assume only lower 32 bits carry the bus number for now.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-23 08:56:05 +09:00
Andy Shevchenko
d2c2f6a476 spi: pxa2xx: derive struct chip_data from struct drv_data
Since we call pxa2xx_ssp_get_clk_div() from pump_transfers() we may derive
pointer to struct chip_data from struct drv_data like it's done in the rest
of the functions. This will make it less errorprone.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-23 08:56:05 +09:00
Andy Shevchenko
d74c4b1c61 spi: pxa2xx: move debug messages to pump_transfer()
The speed can be changed from transfer to transfer, that's why the messages
do not depict the actual values during ->setup(). Move debug messages from
->setup() to pump_transfers(). Get rid of leftovers as well.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-23 08:56:05 +09:00
Andrew Y. Kuksov
1476253cef spi: imx: fix ecspi mode setup
Fixed problem with setting spi mode 0 or 1 after setting mode 2 or 3

SPI_MODE_0 and SPI_MODE_1 requires clock low when inactive. SPI_MODE_2
and SPI_MODE_3 requires clk high when inactive.
Currently driver can just set bits in fields SCLK_PHA (SPI Clock/Data
Phase Control), SCLK_POL (SPI Clock Polarity Control),
SCLK_CTL (controls the inactive state of SCLK) ans SS_POL (SPI SS
Polarity Select) of ECSPIx_CONFIGREG register.
This patch allows driver to clear corresponding bits in these fields.

Signed-off-by: Andrew Y. Kuksov <qxovxp@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-23 02:07:52 +09:00
Jonas Gorski
44d8fb3094 spi/bcm63xx: move register definitions into the driver
Move all register definitions and structs into the driver. This allows
us dropping the platform_data struct and drop any arch specific
includes. Make use of different device names to identify the version of
the block we have.

Since we now have full control over the message width, we can drop the
size check, which was broken anyway, since it never set ret to any error
code.

Also since we now have no arch depedendent resources, we can now allow
compiling it for any arch, hidden behind COMPILE_TEST.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-23 01:19:58 +09:00
David Mosberger-Tang
06515f8390 spi: atmel: Fix DMA-setup for transfers with more than 8 bits per word
The DMA-slave configuration depends on the whether <= 8 or > 8 bits
are transferred per word, so we need to call
atmel_spi_dma_slave_config() with the correct value.

Signed-off-by: David Mosberger <davidm@egauge.net>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
2015-10-23 01:15:16 +09:00
Neil Armstrong
468a32082b spi: omap2-mcspi: disable other channels CHCONF_FORCE in prepare_message
Since the "Switch driver to use transfer_one" change, the cs_change
behavior has changed and a channel chip select can still be
asserted when changing channel from a previous last transfer in a
message having the cs_change attribute.

Since there is no sense having multiple chip select being asserted at the
same time, disable all the remaining forced chip selects in a the
prepare_message called right before a spi_transfer_one_message call.
It ignores the current channel configuration in order to keep the
possibility to leave the chip select asserted between messages.

It fixes this bug on a DM8168 SoC ES2.1 Soc and an OMAP4 ES2.1 SoC.
It was hanging all the other channels transfers when a CHCONF_FORCE
is present on the wrong channel.

Fixes: b28cb9414d ("spi: omap2-mcspi: Switch driver to use transfer_one")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Michael Welling <mwelling@ieee.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-22 15:26:22 +01:00
Andy Shevchenko
243f07be24 spi: core: use gpio_is_valid() helper
Check if GPIO pin is valid by API helper function.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-21 13:27:37 +01:00
Andy Shevchenko
f4aaa1c8a5 spi: dw: remove a NULL check when call ->remove()
Currently all users aware about calling dw_spi_remove_host() with properly set
parameter. Remove unneeded check.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-20 15:45:43 +01:00
Andy Shevchenko
02f20387e1 spi: dw: explicitly free IRQ handler in dw_spi_remove_host()
The following warning occurs when DW SPI is compiled as a module and it's a PCI
device. On the removal stage pcibios_free_irq() is called earlier than
free_irq() due to the latter is called at managed resources free strage.

------------[ cut here ]------------
WARNING: CPU: 1 PID: 1003 at /home/andy/prj/linux/fs/proc/generic.c:575 remove_proc_entry+0x118/0x150()
remove_proc_entry: removing non-empty directory 'irq/38', leaking at least 'dw_spi1'
Modules linked in: spi_dw_midpci(-) spi_dw [last unloaded: dw_dmac_core]
CPU: 1 PID: 1003 Comm: modprobe Not tainted 4.3.0-rc5-next-20151013+ #32
 00000000 00000000 f5535d70 c12dc220 f5535db0 f5535da0 c104e912 c198a6bc
 f5535dcc 000003eb c198a638 0000023f c11b4098 c11b4098 f54f1ec8 f54f1ea0
 f642ba20 f5535db8 c104e96e 00000009 f5535db0 c198a6bc f5535dcc f5535df0
Call Trace:
 [<c12dc220>] dump_stack+0x41/0x61
 [<c104e912>] warn_slowpath_common+0x82/0xb0
 [<c11b4098>] ? remove_proc_entry+0x118/0x150
 [<c11b4098>] ? remove_proc_entry+0x118/0x150
 [<c104e96e>] warn_slowpath_fmt+0x2e/0x30
 [<c11b4098>] remove_proc_entry+0x118/0x150
 [<c109b96a>] unregister_irq_proc+0xaa/0xc0
 [<c109575e>] free_desc+0x1e/0x60
 [<c10957d2>] irq_free_descs+0x32/0x70
 [<c109b1a0>] irq_domain_free_irqs+0x120/0x150
 [<c1039e8c>] mp_unmap_irq+0x5c/0x60
 [<c16277b0>] intel_mid_pci_irq_disable+0x20/0x40
 [<c1627c7f>] pcibios_free_irq+0xf/0x20
 [<c13189f2>] pci_device_remove+0x52/0xb0
 [<c13f6367>] __device_release_driver+0x77/0x100
 [<c13f6da7>] driver_detach+0x87/0x90
 [<c13f5eaa>] bus_remove_driver+0x4a/0xc0
 [<c128bf0d>] ? selinux_capable+0xd/0x10
 [<c13f7483>] driver_unregister+0x23/0x60
 [<c10bad8a>] ? find_module_all+0x5a/0x80
 [<c1317413>] pci_unregister_driver+0x13/0x60
 [<f80ac654>] dw_spi_driver_exit+0xd/0xf [spi_dw_midpci]
 [<c10bce9a>] SyS_delete_module+0x17a/0x210

Explicitly call free_irq() at removal stage of the DW SPI driver.

Fixes: 04f421e7b0 (spi: dw: use managed resources)
Cc: stable@vger.kernel.org
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-20 15:45:43 +01:00
Andy Shevchenko
9899995e98 spi: dw-mmio: convert to unified device property API
Convert the driver to use unfied device property API instead of OF one.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-19 20:32:01 +01:00
Andy Shevchenko
1c2df96538 spi: dw-pci: remove unused pdev member from struct dw_spi_pci
The pdev member is not used anywhere, thus remove it. Moreover struct
dw_spi_pci becomes an equivalent of struct dw_spi and therefore remove entire
struct dw_spi_pci.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-19 20:32:01 +01:00
Andy Shevchenko
1cc3f141f0 spi: dw: introduce spi_shutdown_chip()
This helper disables SPI controller and sets clock to 0.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-19 20:32:01 +01:00
Andy Shevchenko
d53c0ef319 spi: dw: eliminate unused threshold variables
The tx_threshold and rx_threshold variables are not used anywhere. Remove them.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-19 20:32:01 +01:00
Andy Shevchenko
de6feda884 spi: dw: eliminate speed variable in ->transfer_one()
There is no point to have a separate variable for speed in ->transfer_one().

While here, remove !chip->clk_div from a condition since it is assigned
simultaneously with chip->speed_hz. We can do this safely because
 a) transfer speed can't be higher than max_freq and therefore chip->clk_div
    can be 0 only when chip->speed_hz is 0, and
 b) transfer speed can't be 0, otherwise we will get division by zero
    exception.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-19 20:32:01 +01:00
Andy Shevchenko
863cb2f72e spi: dw: remove bits_per_word member of struct chip_data
There is no need to carry over spi->bits_per_word and Co from ->setup() in
struct chip_data since ->transfer_one() will anyway take the transfer
parameters from struct spi_transfer. This is since SPI core validates both
bits_per_word transfer parameter and defaults to spi->bits_per_word in case
that per transfer parameter is not set.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-19 20:32:01 +01:00
Andy Shevchenko
4adb1f8f88 spi: dw: remove unneeded cr0 member of struct chip_data
Since we recalculate cr0 each time we start a transfer the chip_data->cr0
becomes redundant. Remove it and related pieces.

This is a follow up to commit 0ed36990a9 (spi: dw: Remove needless if
statements).

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-19 20:31:57 +01:00
Andy Shevchenko
5f0966e61f spi: dw: use plain struct device * at earlier ->probe()
The name of the master device is set during registrationg which happens after
we issue the error message. Change it to plain struct device * to see which
device registration failed.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-19 20:31:57 +01:00
Luis de Bethencourt
8cae042478 spi: davinci: use spi->cs_gpio directly
Use spi->cs_gpio directly to remove the following build warning:
drivers/spi/spi-davinci.c:219:6: warning: 'gpio' may be used uninitialized in this function

Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-16 19:09:01 +01:00
Vignesh R
57c2ecd9bf spi: spi-ti-qspi: switch to polling mode for better r/w performance
Currently word completion interrupt is fired for transfer of every
word(8bit to 128bit in size). This adds a lot of overhead, and decreases
r/w throughput. It hardly takes 3us(@48MHz) for 128bit r/w to complete,
hence its better to poll on word complete bit to be set in
QSPI_SPI_STATUS_REG instead of using interrupts.
This increases the throughput by 30% in both read and write case.

So, switch to polling mode instead of interrupts to determine completion
of word transfer.

Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-16 19:08:06 +01:00