Commit graph

32 commits

Author SHA1 Message Date
Knuth Posern
a42fb351ca thunderbolt: Allow loading of module on recent Apple MacBooks with thunderbolt 2 controller
The pci device ids listed in the thunderbolt driver are to restrictive,
which prevents the driver from being loaded on recent Apple MacBooks
using a thunderbolt 2 controller. In particular this prevented any
hot-plugging functionality for thunderbolt based ethernet dongles
(i.e. Apples thunderbolt gigabit ethernet broadcom tg3 based dongle
Model A1433 EMC 2590).

Changing the subvendor and subdevice to PCI_ANY_ID the thunderbolt driver
loads and binds to the pci device 07:00.0 System peripheral:
Intel Corporation Device 156c which is the thunderbolt 2 controller on
the MacBookPro12,1.

Successfully tested on MacBookPro12,1. With the patch the thunderbolt
module gets now loaded on boot. And it provides hot-plugging support both
for a cold-plugged and a warm-plugged ethernet dongle.

Signed-off-by: Andreas Noever <andreas.noever@gmail.com>
Acked-by: Knuth Posern <knuth@posern.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-20 15:20:11 -07:00
Andreas Noever
72ad366f68 thunderbolt: Clear hops before overwriting
Zero hops in tb_path_activate before writing a new path.

This fixes the following scenario:
 - Boot with a coldplugged device
 - Unplug device
 - Plug device back in
 - PCI hotplug fails

The hotplug operation fails because our new path matches the (now
defunct) path which was setup by the firmware for the coldplugged
device. By writing zeros before writing our path configuration we can
force thunderbolt to retrain the path.

Signed-off-by: Andreas Noever <andreas.noever@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-08-26 14:54:48 -07:00
Himangi Saraogi
2a211f320e thunderbolt: Use kcalloc
The advantage of kcalloc is, that will prevent integer overflows
which could result from the multiplication of number of elements
and size and it is also a bit nicer to read.

Signed-off-by: Himangi Saraogi <himangi774@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Acked-by: Andreas Noever <andreas.noever@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-13 13:16:50 -07:00
Himangi Saraogi
fc51768ba2 thunderbolt: Correct the size argument to devm_kzalloc
nhi->rx_rings does not have type as struct tb_ring *, as it is a
double pointer so the elements of the array should have pointer type,
not structure type.

The Coccinelle semantic patch that makes this change is as follows:

// <smpl>
@disable sizeof_type_expr@
type T;
T **x;
@@

  x =
  <+...sizeof(
- T
+ *x
  )...+>
// </smpl>

Signed-off-by: Himangi Saraogi <himangi774@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Cc: Andreas Noever <andreas.noever@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-07 18:56:20 -07:00
Andreas Noever
f34323b64a thunderbolt: select CRC32 in Kconfig
We use __crc32c_le in ctl.c. So make sure that the dependency is there.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Andreas Noever <andreas.noever@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-21 13:12:35 -07:00
Andreas Noever
e0f550141b thunderbolt: Make tb_eeprom_get_drom_offset static
tb_eeprom_get_drom_offset is local to this file.

Signed-off-by: Andreas Noever <andreas.noever@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-20 13:06:01 -07:00
Andreas Noever
e7120778a4 thunderbolt: Make enum tb_drom_entry_type unsigned
Force enum tb_drom_entry_type to unsigned to fix the following error:

drivers/thunderbolt/eeprom.c:202:39: error: dubious one-bit signed bitfield

Signed-off-by: Andreas Noever <andreas.noever@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-20 13:06:01 -07:00
Andreas Noever
7f2d5f7bc5 thunderbolt: Fix header declaration of tb_find_cap
tb_find_cap in cap.c takes an enum tb_cap and not an u32. Fix the
declaration in tb.h.

Signed-off-by: Andreas Noever <andreas.noever@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-20 13:06:01 -07:00
Andreas Noever
801dba53fe thunderbolt: Add casts to prevent endianness warnings
Thunderbolt packets are big endian. Cast pkg->buffer to __be32* when
accessing the checksum.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Andreas Noever <andreas.noever@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-20 13:06:01 -07:00
Arnd Bergmann
3543fb776d thunderbolt: fix format string for size_t
The result of "sizeof(struct tb_drom_entry_port)" is a size_t, which
is not necessarily the same as 'long', so we should use the appropriate
%z format string instead of %l.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Andreas Noever <andreas.noever@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-20 09:46:36 -07:00
Arnd Bergmann
0cb4e2be8b thunderbolt: add PCI dependency
The thunderbolt drivers cannot be built if CONFIG_PCI is disabled,
better add an explicit Kconfig dependency.
The "default no" line is redundant and can be removed at the same
time.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Andreas Noever <andreas.noever@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-20 09:46:36 -07:00
Sachin Kamat
620863f71c thunderbolt: Staticize nhi_ids
'nhi_ids' is local to this file.

Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com>
Acked-by: Andreas Noever <andreas.noever@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-20 09:44:42 -07:00
Sachin Kamat
f19b72c6e8 thunderbolt: Use NULL instead of 0 in nhi.c
'descriptors' is a pointer. Use NULL isntead of 0.

Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com>
Acked-by: Andreas Noever <andreas.noever@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-20 09:44:42 -07:00
Sachin Kamat
8db353bdd0 thunderbolt: Use NULL instead of 0 in ctl.c
The function returns a pointer. Hence return NULL instead of 0.

Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com>
Acked-by: Andreas Noever <andreas.noever@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-20 09:44:42 -07:00
Sachin Kamat
c9c2deef45 thunderbolt: Use NULL instead of 0 in switch.c
The function returns a pointer. Hence return NULL instead of 0.

Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com>
Acked-by: Andreas Noever <andreas.noever@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-20 09:44:42 -07:00
Sachin Kamat
10fefe56bb thunderbolt: Fix build error in switch.c
Fixes the below error:
drivers/thunderbolt/switch.c:347:2: error: implicit declaration of function ‘kzalloc’ [-Werror=implicit-function-declaration]
drivers/thunderbolt/switch.c:381:2: error: implicit declaration of function ‘kcalloc’ [-Werror=implicit-function-declaration]

Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com>
Acked-by: Andreas Noever <andreas.noever@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-20 09:44:42 -07:00
Sachin Kamat
2b35404ef7 thunderbolt: Fix build error in eeprom.c
Fixes the below error:
drivers/thunderbolt/eeprom.c:407:2: error: implicit declaration of function ‘kzalloc’ [-Werror=implicit-function-declaration]
drivers/thunderbolt/eeprom.c:444:2: error: implicit declaration of function ‘kfree’ [-Werror=implicit-function-declaration]

Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com>
Acked-by: Andreas Noever <andreas.noever@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-20 09:44:42 -07:00
Andreas Noever
343fcb8c70 thunderbolt: Fix nontrivial endpoint devices.
Fix issues observed with the Startech docking station:

Fix the type of the route parameter in tb_ctl_rx. It should be u64 and not
u8 (which only worked for short routes).

A thunderbolt cable contains two lanes. If both endpoints support it a
connection will be established on both lanes. Previously we tried to
scan below both "dual link ports". Use the information extracted from
the drom to only scan behind ports with lane_nr == 0.

Endpoints with more complex thunderbolt controllers have some of their
ports disabled (for example the NHI port or one of the HDMI/DP ports).
Accessing them results in an error so we now ignore ports which are
marked as disabled in the drom.

Signed-off-by: Andreas Noever <andreas.noever@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-19 14:14:35 -07:00
Andreas Noever
cd22e73bdf thunderbolt: Read port configuration from eeprom.
All Thunderbolt switches (except the root switch) contain a drom which
contains information about the device. Right now we only read the UID.

Add code to read and parse this drom. For now we are only interested in
which ports are disabled and which ports are "dual link ports" (a
physical thunderbolt port/socket contains two such ports).

Signed-off-by: Andreas Noever <andreas.noever@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-19 14:14:35 -07:00
Andreas Noever
23dd5bb49d thunderbolt: Add suspend/hibernate support
We use _noirq since we have to restore the pci tunnels before the pci
core wakes the tunneled devices.

Signed-off-by: Andreas Noever <andreas.noever@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-19 14:13:00 -07:00
Andreas Noever
c90553b3c4 thunderbolt: Read switch uid from EEPROM
Add eeprom access code and read the uid during switch initialization.
The UID will be used to check device identity after suspend.

Signed-off-by: Andreas Noever <andreas.noever@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-19 14:13:00 -07:00
Andreas Noever
3364f0c127 thunderbolt: Add support for simple pci tunnels
A pci downstream and pci upstream port can be connected through a
tunnel. To establish the tunnel we have to setup two unidirectional
paths between the two ports.

Right now we only support paths with two hops (i.e. no chaining) and at
most one pci device per thunderbolt device.

Signed-off-by: Andreas Noever <andreas.noever@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-19 14:07:47 -07:00
Andreas Noever
520b670216 thunderbolt: Add path setup code.
A thunderbolt path is a unidirectional channel between two thunderbolt
ports. Two such paths are needed to establish a pci tunnel.

This patch introduces struct tb_path as well as a set of tb_path_*
methods which are used to activate & deactivate paths.

Signed-off-by: Andreas Noever <andreas.noever@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-19 14:07:47 -07:00
Andreas Noever
053596d9e2 thunderbolt: Handle hotplug events
We receive a plug event callback whenever a thunderbolt device is added
or removed. This patch fills in the tb_handle_hotplug method and starts
reacting to these events by adding/removing switches from the hierarchy.

Signed-off-by: Andreas Noever <andreas.noever@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-19 14:07:47 -07:00
Andreas Noever
9da672a428 thunderbolt: Scan for downstream switches
Add utility methods tb_port_state and tb_wait_for_port. Add
tb_scan_switch which recursively checks for downstream switches.

Signed-off-by: Andreas Noever <andreas.noever@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-19 14:07:47 -07:00
Andreas Noever
ca389f716f thunderbolt: Enable plug events
Thunderbolt switches have a plug events capability. This patch adds the
tb_plug_events_active method and uses it to activate plug events during
switch allocation.

Signed-off-by: Andreas Noever <andreas.noever@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-19 14:07:47 -07:00
Andreas Noever
e2b8785ed3 thunderbolt: Add thunderbolt capability handling
Thunderbolt config areas contain capability lists similar to those found
on pci devices. This patch introduces a tb_find_cap utility method to
search for capabilities.

Signed-off-by: Andreas Noever <andreas.noever@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-19 14:07:47 -07:00
Andreas Noever
a25c8b2fc9 thunderbolt: Initialize root switch and ports
This patch adds the structures tb_switch and tb_port as well as code to
initialize the root switch.

Signed-off-by: Andreas Noever <andreas.noever@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-19 14:07:08 -07:00
Andreas Noever
7adf60972c thunderbolt: Add tb_regs.h
Every thunderbolt device consists (logically) of a switch with multiple
ports. Every port contains up to four config regions (HOPS, PORT,
SWITCH, COUNTERS) which are used to configure the device.

The tb_regs.h file contains all known registers and capabilities from
these config regions.

Signed-off-by: Andreas Noever <andreas.noever@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-19 14:07:07 -07:00
Andreas Noever
d6cc51cd1a thunderbolt: Setup control channel
Add struct tb which will contain our view of the thunderbolt bus.  For
now it just contains a pointer to the control channel and a workqueue
for hotplug events.

Add thunderbolt_alloc_and_start() and thunderbolt_shutdown_and_free()
which are responsible for setup and teardown of struct tb.

Signed-off-by: Andreas Noever <andreas.noever@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-19 14:07:07 -07:00
Andreas Noever
f25bf6fcb1 thunderbolt: Add control channel interface
Thunderbolt devices are configured by reading/writing into their
configuration space (similar to pci). This is done by sending packets
through the NHI (native host interface) onto the control channel.

This patch handles the low level packet based protocol and exposes
higher level operations like tb_cfg_read/tb_cfg_write.

Signed-off-by: Andreas Noever <andreas.noever@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-19 14:07:07 -07:00
Andreas Noever
1660315366 thunderbolt: Add initial cactus ridge NHI support
Thunderbolt hotplug is supposed to be handled by the firmware. But Apple
decided to implement thunderbolt at the operating system level. The
firmare only initializes thunderbolt devices that are present at boot
time. This driver enables hotplug of thunderbolt of non-chained
thunderbolt devices on Apple systems with a cactus ridge controller.

This first patch adds the Kconfig file as well the parts of the driver
which talk directly to the hardware (that is pci device setup, interrupt
handling and RX/TX ring management).

Signed-off-by: Andreas Noever <andreas.noever@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-19 14:04:52 -07:00