Drop code for mode_no <= 14. These are not supported so this is all
just dead code.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Unwrap lines to improve readability. Comments were deleted as they were not
really informative.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Delete mode names from the table. They are just redundant data.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since the mode search is not string-based anymore, we can drop XxYx24
entries which were just duplicated XxYx32 entries.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eliminate string comparison from the video mode search.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The default rate_idx is same for all video modes, no need to keep that
in the table.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
XG45 is not recognized/supported by the driver.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
XG_41 is not listed in xgifb_pci_table, so the code can be safely dropped.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Initialize ModeIdIndex according to the selected video mode. Currently
index 0 is always used and wrong clock data may be used.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Delete code that has been commented out.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Initialize ModeIdIndex according to the selected video mode. Currently
index 0 is always used and wrong video mode data may be used.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Delete code that has been commented out.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some platforms (e.g. ppc460ex) have 36-bit physical addressing, while
sizeof(unsigned long) == 4. Adapt xgifb driver to use phys_addr_t for
physical address variables instead of unsigned long.
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
XGIfb driver transfers integer port number through several typecasts via
pjIOAddress field. Drop that field completely and use vga_base field of
xgifb_info directly.
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The RelIO field is unused in the driver, drop it.
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Image on Z11m cards was totally garbled due to wrong memory being
selected. Add a special handling for Z11m cards. Tested on PCIe Z11 and
Z11m cards.
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes the remaining defines that are already defined
identically in the sis initdef.h header.
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since the defines TVVCLKDIV2, TVVCLK, HiTVVCLKDIV2, HiTVVCLK,
HiTVSimuVCLK and HiTVTextVCLK are now defined as relative values, we
have to use TVCLKBASE_315 (0x31) as a base address to get the same values
as before the merge.
The old and now duplicated defines were removed
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch renames some of the defines that exist in the sis initdef.h
but seem to have a different value.
In order to preserve the functionality of the driver, we simply prepend
these defines with XGI_ (for now) to resolve conflicts and review them
later on.
Renames:
SetCRT2ToLCDA -> XGI_SetCRT2ToLCDA
LCDVESATiming -> XGI_LCDVESATiming
EnableLVDSDDA -> XGI_EnableLVDSDDA
LCDDualLink -> XGI_LCDDualLink
ModeSwitchStatus -> XGI_ModeSwitchStatus
YPbPr750pVCLK -> XGI_YPbPr750pVCLK
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch renames the Panel* defines and their usage to the naming
convention of the sis initdef.h and removes the now duplicated defines.
Renames:
Panel320x480 -> Panel_320x480
Panel800x600 -> Panel_800x600
Panel1024x768 -> Panel_1024x768
Panel1024x768x75 -> Panel_1024x768x75
Panel1280x1024 -> Panel_1280x1024
Panel1280x1024x75 -> Panel_1280x1024x75
Panel1280x960 -> Panel_1280x960
Panel1400x1050 -> Panel_1400x1050
Panel1600x1200 -> Panel_1600x1200
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch includes the initdef.h header from the sis driver.
Since the xgi driver used to redefine a lot of stuff from the sis
driver, we can simply include the headers of the sis driver itself, so
we can remove duplicated stuff later on.
In order to include the initdef.h we have to rename the header guards.
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rewrote code to use pr_lvl() instead of printk(). There are still a few
instances of printk(), mainly in the debug code which looks like it's going to
be dropped/rewrote (most of it is blocked out).
Signed-off-by: Sam Hansen <solid.se7en@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replaced an instance of __FUNCTION__ with __func__ in XGI_main_26.c.
Signed-off-by: Sam Hansen <solid.se7en@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cleaned up XGI_main_26.c and removed some unneeded braces to keep with code
conventions.
Signed-off-by: Sam Hansen <solid.se7en@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Added the kbuild macro pr_fmt() to XGI_main_26.c
Signed-off-by: Sam Hansen <solid.se7en@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes the now unused structs and defines which were mere
duplicates of the ones in the sgi headers
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes the usage of some xgi structs and defines and
replaces them with the _identical_ structs from the sis headers.
Thus the old structs and defines can be removed.
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch includes the headers of the sis driver and reorders some
includes.
Since the xgi driver used to redefine a lot of stuff from the sis
driver, we can simply include the headers of the sis driver itself, so
we can remove duplicated stuff later on.
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes the probed mode LCD_320x480 which isn't supported
anyway since this mode falls through to the default (=invalid) mode in
the
XGIfb_validate_mode function (see line 529 ff. for details. the
commented out code for this mode is also removed).
By removing this assignment, we can use the LCD_TYPEs from the sis
driver without modifications.
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make "forcecrt2type" to apply also for XG21. The patch enables user to
switch LVDS LCD ON/OFF without the need to update the video BIOS.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Delete XGI21_LCDCapList. This data is display specific and does not
belong to the driver. It should be provided by the video BIOS.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Move the LVDS data into a device-specific data, and eliminate the global
variable usage.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
XG27 has the second display output already hardcoded to disabled. Just
in case, ensure that it has the LVDS code paths disabled. This will
simplify the future cleanups.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Delete XGIfb_GetXG21LVDSData() and code which duplicates
xgifb_read_vbios().
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Only a single LVDS table entry is needed by the driver.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Check the BIOS size to avoid out of bounds array access. Disable LVDS
in case errors are detected.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
We need the video BIOS only on XG21 and only during the init, so let's
do everything at the same place.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Remove video BIOS access from the routine, use the flag instead which
is initialized according to the BIOS data.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Use a pointer variable to make some lines shorter and more readable.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Rename pVideoMemory to vbios, and also remove volatile at the same go.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
If the count (j) is 0xff, just do the loop once.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Eliminate unnecessary nesting levels by rearranging code and conditions.
The resulting code should be still identical.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Eliminate unnecessary nesting levels by rearranging code and conditions.
The resulting code should be still identical.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Eliminate unneeded function and struct field. The same information is
available in HwDeviceExtension->jChipType.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
XGI_GetLVDSOEMTableIndex() can be made static. Move the function, so that
forward declaration is not needed.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
XGI_XG21SetPanelDelay() can be made static. Move the function, so that
forward declaration is not needed.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
XGI_XG27BLSignalVDD() can be made static. Move the function, so that
forward declaration is not needed.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
XGI_XG21BLSignalVDD() can be made static. Move the function, so that
forward declaration is not needed.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
XGI_SetXG27FPBits() can be made static. Move the function, so that
forward declaration is not needed.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
XGI_SetXG21FPBits() can be made static. Move the function, so that
forward declaration is not needed.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
XGI_GetResInfo() can be made static. Move the function, so that forward
declaration is not needed.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
XGI_LongWait() can be made static. Move the function, so that forward
declaration is not needed.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The function is used only in vb_init.c, so move it there and make
it static.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Delete unused function XGI_GetSenseStatus().
Static functions XGINew_Is301B(), XGINew_Sense(), XGINew_GetPanelID(),
XGINew_BridgeIsEnable() and XGINew_SenseHiTV() can be deleted as well,
since they are not used anymore.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch converts pci_table entries to use the PCI_DEVICE macro,
if .subvendor and .subdevice are set to PCI_ANY_ID,
and thus improves readability.
v2:
Since the driver_data field isn't used anywhere we can also drop the
assignments for class, class_mask and driver_data.
(found by Aaro Koskinen)
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* 'fbdev-next' of git://github.com/schandinat/linux-2.6: (270 commits)
video: platinumfb: Add __devexit_p at necessary place
drivers/video: fsl-diu-fb: merge diu_pool into fsl_diu_data
drivers/video: fsl-diu-fb: merge diu_hw into fsl_diu_data
drivers/video: fsl-diu-fb: only DIU modes 0 and 1 are supported
drivers/video: fsl-diu-fb: remove unused panel operating mode support
drivers/video: fsl-diu-fb: use an enum for the AOI index
drivers/video: fsl-diu-fb: add several new video modes
drivers/video: fsl-diu-fb: remove broken screen blanking support
drivers/video: fsl-diu-fb: move some definitions out of the header file
drivers/video: fsl-diu-fb: fix some ioctls
video: da8xx-fb: Increased resolution configuration of revised LCDC IP
OMAPDSS: picodlp: add missing #include <linux/module.h>
fb: fix au1100fb bitrot.
mx3fb: fix NULL pointer dereference in screen blanking.
video: irq: Remove IRQF_DISABLED
smscufx: change edid data to u8 instead of char
OMAPDSS: DISPC: zorder support for DSS overlays
OMAPDSS: DISPC: VIDEO3 pipeline support
OMAPDSS/OMAP_VOUT: Fix incorrect OMAP3-alpha compatibility setting
video/omap: fix build dependencies
...
Fix up conflicts in:
- drivers/staging/xgifb/XGI_main_26.c
Changes to XGIfb_pan_var()
- drivers/video/omap/{lcd_apollon.c,lcd_ldp.c,lcd_overo.c}
Removed (or in the case of apollon.c, merged into the generic
DSS panel in drivers/video/omap2/displays/panel-generic-dpi.c)
Convert the display type to enum and rename disp_state to display2.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The driver does not need to manage CRT1 state.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
DAC tables are read-only and can be made const.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
RAM type tables are read-only and can be made const.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Move the memory bus width info to vb_device_info.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Move the memory channel info into vb_device_info.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The RAM type is device specific, so move it into vb_device_info.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Comments are wrong, the table is read-only and can be made const.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
filter_tb is only used inside a single function, and it does not need
to be static.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Eliminate XGIfb_fix and initialize needed fields of fb_info->fix
in probe().
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Eliminate default_var and initialize needed fields of fb_info->var
in probe().
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
pseudo_palette should be dynamically allocated for each fb.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The current refresh rate index should be stored in the device-specific
data allocated in probe().
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The current mode index should be stored in the device-specific data
allocated in probe().
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
We can get the information from the table with mode index.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Delete global xgi_video_info and dynamically allocate the data.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Avoid direct references to global xgi_video_info. This will help changing
the data from statically allocated to dynamically allocated.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Add a global variable for the default refresh rate. This is done to
get rid of references to xgi_video_info before the probe routine, which
should allocate the xgi_video_info dynamically in the future.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
XGIfb_query_VGA_config_space() is used only once during the init and
can be replaced with a single PCI configuration space read.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Don't access the global xgi_video_info directly in xgifb_remove().
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Add a missing include to eliminate the following sparse warning:
drivers/staging/xgifb/vb_table.h:2572:28: warning: symbol 'XGI21_LCDCapList' was not declared. Should it be static?
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Include Linux headers before driver's own headers.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The condition for printk() is wrong. Also change it to dev_info().
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
MTRR region should be deleted on probe failure and driver removal.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The code is almost the same for XG21 and XG27, a single routine can
cover both.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The code is almost the same for XG21 and XG27, a single routine can
cover both.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
IF_DEF_CH7007 is hard-coded to 0, so this is all just dead code that
can be deleted.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
IF_DEF_CH7005 is hard-coded to 0, so this is all just dead code that
can be deleted.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
IF_DEF_CH7017 is hard-coded to 0, so this is all just dead code that
can be deleted.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Delete redundant function. Also eliminates the following sparse warning:
drivers/staging/xgifb/vb_setmode.c:8033:6: warning: symbol 'XGI_OpenCRTC' was not declared. Should it be static?
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Use a common init function for module and built-in driver.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Remove incorrect/misleading text from parameter descriptions.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Delete all references to mode "none". It should be handled like any
other invalid mode.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
According to the comment, the default mode should be 800x600x8 while
the index points actually to 800x600x16. Change the comment and move
the definition instead of changing the current behaviour.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The default mode is the same regardless of the display type, except for
XG21/LCD which is determined dynamically.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fail the probe if the LCD resolution described in card firmware does
not match any of the supported modes.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The code for determining the default video mode is unnecessarily
duplicated in XGIfb_search_mode() and XGIfb_search_vesamode() functions.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The same default video mode should be assumed regardless if the driver
is a module or not. This won't change the current behaviour, but it will
simplify further changes.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
XGIfb_search_mode() is always called with a valid string pointer.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
When searching the video mode, some HW details needs to be
known. Therefore it's not possible to do that reliably before probe().
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
If the driver fails to get LVDS LCD data from the firmware, it falls
back to using driver's hardcoded values. However, this is done too
early in the probe. The selected video mode index is not yet known,
and also in some cases it could be defaulting to -1 resulting in a read
outside the array. Fix this by moving the array lookup after the video
mode validation.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Check option values with kstrtoul(). This will also eliminate some
checkpatch warnings about simple_strtoul() usage.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Print options only if they are given. Delete other messages.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
It's possible to disable the built-in xgifb driver with the kernel
command line option:
video=xgifb:off
This is already handled by the generic framebuffer layer (fb_get_options()
will return TRUE resulting in init failure), so no need to process the
option in the driver.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Setting any of the FB options will disable ypan as a side effect. It
should be disabled only by the "noypan" option.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Delete a string which is always empty.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Reviewed-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Delete version information, it's just noise and serves no purpose.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Reviewed-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Replace a global variable with a constant.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Reviewed-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The driver does not allow selecting the mode "none", so no need to check
for that in probe.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Reviewed-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
XGIFB_PAN is always defined and checks can be eliminated.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Reviewed-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Delete some more unused definitions.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Reviewed-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
NewScratch is always defined so all checks can be eliminated.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Reviewed-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a patch to the XGI_main.h and XGI_main_26.c file that fixed up a define warrning found by the checkpatch.pl tools.
Signed-off-by: Ruslan Pisarev <ruslan@rpisarev.org.ua>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a patch to the XGI_main_26.c file that fixed up a errors "do not initialise statics to 0 or NULL" found by the checkpatch.pl tools.
Signed-off-by: Ruslan Pisarev <ruslan@rpisarev.org.ua>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a patch to the XGI_main.h file that fixed up a errors "do not initialise statics to 0 or NULL" found by the checkpatch.pl tools.
Signed-off-by: Ruslan Pisarev <ruslan@rpisarev.org.ua>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
We must not use any information in the passed var besides xoffset,
yoffset and vmode as otherwise applications might abuse it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
It was pointed out by 'make versioncheck' that some includes of
linux/version.h are not needed in drivers/staging/xgifb/.
This patch removes them.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Not all warnings/errors were silenced, some of them are related to
simple printk() messages that imho should not be split across multiple
lines (it makes it harder to grep for example), and some of them are
related to long lines that are pretty much impossible to split without
proper code refactoring.
Resubmitting this patch because of conflicts.
Signed-off-by: Daniel Kenji Toyama <kenji.toyama@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Now there's only 10 errors and 1 warning given by checkpatch.pl, and
these are related initialization of statics. The only warning left can
be safely ignored I believe.
I'm resending this patch as the previous one was conflicting with the
newer version updated by Aaro Koskinen.
Signed-off-by: Daniel Kenji Toyama <kenji.toyama@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
All the warnings about styles have been removed.
Signed-off-by: Daniel Kenji Toyama <kenji.toyama@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Now checkpatch.pl doesn't complain about vgatypes.h.
Signed-off-by: Daniel Kenji Toyama <kenji.toyama@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
As suggested by checkpatch.pl, <linux/io.h> should be used instead of
<asm/io.h>.
Signed-off-by: Daniel Kenji Toyama <kenji.toyama@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a big patch to remove all the warnings given by checkpatch.pl.
There were 13348 errors and 3112 warnings, but now there's nothing.
I've compiled the files dependent on this header and they seem alright.
Signed-off-by: Daniel Kenji Toyama <kenji.toyama@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
I've removed all the warnings except one that I believe is a false
positive. The original author has used a macro to #define EXTERN to be
'extern', so in this case 'extern' is not used to define the storage
class of anything, but just the value of the macro. We can safely ignore
this warning.
Signed-off-by: Daniel Kenji Toyama <kenji.toyama@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
There were hundreds of warnings and errors given by checkpatch.pl but
now it's down to 20. These ones that were left in the code need some
more attention, cause I reckon the functions are overly nested leading
to a mess of code in a traditional 80 character screen. I'm sure this code
can be refactored into something more visually pleasing (things like
compressing two nested if's into a single if with an AND would help a
lot already).
Signed-off-by: Daniel Kenji Toyama <kenji.toyama@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
All the warnings in vb_setmode.h given by checkpatch.pl were removed.
Signed-off-by: Daniel Kenji Toyama <kenji.toyama@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
There were hundreds of warnings, but now there's only four. These are
related to the 'volatile' keyword and printk(), which I think should be
left to the maintainers to modify if deemed necessary.
Signed-off-by: Daniel Kenji Toyama <kenji.toyama@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Not all warnings were silenced. One of them is a typedef in vb_ext.h
which I think seems alright.
The other warnings in vb_ext.c I left there because that would involve
changing a bit of the logic in the code. IMHO though I think the
functions are too complicated (i.e. the if/else are too deep within a
big function.) and can probably be split.
Signed-off-by: Daniel Kenji Toyama <kenji.toyama@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
I've removed all the warnings given by checkpatch.pl in vb_def.h and
also changed the indentation of pretty much the entire file so that it
is more consistent.
Signed-off-by: Daniel Kenji Toyama <kenji.toyama@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Move functions so that all forward declarations of internal functions
can be deleted.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Make type usage consistent. Use u8 for HW registers and unsigned for
bitmasks.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Include the .h file and delete redundant definitions.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Use mdelay() instead of udelay() for millisecond delays.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
If the PCI device was disabled when the probe() routine started, the
driver will create 256 MB video memory mapping which is never used or
properly released. It's also unsafe as the size is incorrect for many
video cards. Deleting it also allows eliminating XGIvga_enable global
variable.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The extended register access enable in !XGIvga_enabled case is not needed.
The driver has enabled the access unconditionally already earlier in
the routine.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Since all chips supported by the driver are >= XG40, these checks are
redundant and the code can be modified accordingly.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
XG40 is the first supported chip, so the code for earlier chips can
be dropped.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The probe routine will fail if the chip is other than XG40..XG27, so
the other types can be dropped.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Include the file's .h file and delete the duplicate declarations from
the .c file.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
bIntegratedMMEnabled is always true, so the field and checks can be
eliminated.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The offscreen memory area currently conflicts with the video memory
exported to the framebuffer layer. The driver does not utilize offscreen
memory, so the functionality can be deleted.
The patch also eliminates the one last memory leak when the driver
is unloaded.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The driver does not utilize HW command queue in any way, so the code
can be dropped. The support for the default mode (MMIO) and AGP have
been disabled already anyway.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Drop the badly defined and broken private ioctl interface. Since the
driver is in staging, and some of the ioctls are clearly unsafe or not
even working, it's unlikely that there are any users.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The files contain nothing actually needed by the driver.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The value is always false, so the field can be eliminated.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
fbcon_XGI_fillrect() implementation is trivial and can be replaced with
cfb_fillrect().
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
fbcon_XGI_copyarea() implementation is trivial and can be replaced with
cfb_copyarea().
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
pSR and pCR fields can be deleted with no changes in the functionality.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Delete dead code for skipping the video memory sizing.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Due a cleanup in earlier patches, the function fbcon_XGI_sync now does nothing
so it has to be removed.
This patches removes the unused function.
Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com>
Acked-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
xgifb framebuffer driver had an option to use an accelerator engine that never
got used (XGIfb_accel was always 0).
An earlier patchset removed the code relevant to the accelerator.
Since this spinlock was used only for that code, it can be deleted as well.
Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com>
Acked-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
xgifb framebuffer driver has an option to use an accelerator engine that never
get used (XGIfb_accel is always 0).
An earlier patchset remove the code that depends on the accelerator being
activated. This patch removes all the references to XGIfb_accel.
Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com>
Acked-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
xgifb staging driver for XG20, XG21, XG40, XG42 frame buffer device
has a accelerator engine that never get used (XGIfb_accel is always 0).
Also the driver has a set of defines that hides the synchronization
mechanism used to access critical sections and a way to disable spinlocks
use at compile time.
In a earlier patch all the code that depends on the accelerator being active
was deleted because it was dead code. Since the only usage of this
synchronization defines were in that dead code, this patch removes all the
now unused spinlock conditional compilation logic.
Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com>
Acked-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Earlier patch removed code that never got executed because it depended on
XGIfb_accel variable value to de distinct than 0. But this variable is
always 0 in current driver.
That dead code used a set of functions that not remains unused.
This patch removes these unused functions.
Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com>
Acked-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
xgifb staging driver has code that dependens on XGIfb_accel != 0.
But as Dan Carpenter noticed, XGIfb_accel value is always 0 in current driver.
So there is code that never gets executed.
This patch removes this dead code.
Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com>
Acked-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Move the XGIfb_mmio_size global variable into the video_info struct.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Release and unmap memory on probe error paths and when the module
is removed.
The patch enables unloading and reloading the xgifb module.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
XGINew_LCD_Wait_Time() is implemented using the I/O port 0x61, which is
X86-specific and will fail on other platforms. The code did not make any
sense, but I guess the intention has been to provide a function where
the unit for the delay is milliseconds.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Use proper helper functions to copy the PCI ROM. Also use dynamic memory
allocation. The original code mapped incorrect amount of memory and will
crash on some platforms.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Some xgifb_probe() error paths are missing proper vfree()s. Move them
all into a single place.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
