Problem: If scheduler is already stopped by the time sched_entity
is released and entity's job_queue not empty I encountred
a hang in drm_sched_entity_flush. This is because drm_sched_entity_is_idle
never becomes false.
Fix: In drm_sched_fini detach all sched_entities from the
scheduler's run queues. This will satisfy drm_sched_entity_is_idle.
Also wakeup all those processes stuck in sched_entity flushing
as the scheduler main thread which wakes them up is stopped by now.
v2:
Reverse order of drm_sched_rq_remove_entity and marking
s_entity as stopped to prevent reinserion back to rq due
to race.
v3:
Drop drm_sched_rq_remove_entity, only modify entity->stopped
and check for it in drm_sched_entity_is_idle
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210512142648.666476-14-andrey.grodzovsky@amd.com
Return DRM_TASK_STATUS_ENODEV back to the scheduler when device
is not present so they timeout timer will not be rearmed.
v5: Update to match updated return values in enum drm_gpu_sched_stat
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210512142648.666476-12-andrey.grodzovsky@amd.com
This should prevent writing to memory or IO ranges possibly
already allocated for other uses after our device is removed.
v5:
Protect more places wher memcopy_to/form_io takes place
Protect IB submissions
v6: Switch to !drm_dev_enter instead of scoping entire code
with brackets.
v7:
Drop guard of HW ring commands emission protection since they
are in GART and not in MMIO.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210512142648.666476-10-andrey.grodzovsky@amd.com
This allows to remove explicit creation and destruction
of those attrs and by this avoids warnings on device
finalizing post physical device extraction.
v5: Use newly added pci_driver.dev_groups directly
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210512142648.666476-9-andrey.grodzovsky@amd.com
Problem:
Handle all DMA IOMMU group related dependencies before the
group is removed. Those manifest themself in that when IOMMU
enabled DMA map/unmap is dependent on the presence of IOMMU
group the device belongs to but, this group is released once
the device is removed from PCI topology.
Fix:
Expedite all such unmap operations to pci remove driver callback.
v5: Drop IOMMU notifier and switch to lockless call to ttm_tt_unpopulate
v6: Drop the BO unamp list
v7:
Drop amdgpu_gart_fini
In amdgpu_ih_ring_fini do uncinditional check (!ih->ring)
to avoid freeing uniniitalized rings.
Call amdgpu_ih_ring_fini unconditionally.
v8: Add deatiled explanation
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210517143851.475058-1-andrey.grodzovsky@amd.com
Use it to call disply code dependent on device->drv_data
before it's set to NULL on device unplug
v5:
Move HW finilization into this callback to prevent MMIO accesses
post cpi remove.
v7:
Split kfd suspend from device exit to expdite HW related
stuff to amdgpu_pci_remove
v8:
Squash previous KFD commit into this commit to avoid compile break.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210520032057.497334-1-andrey.grodzovsky@amd.com
Some of the stuff in amdgpu_device_fini such as HW interrupts
disable and pending fences finilization must be done right away on
pci_remove while most of the stuff which relates to finilizing and
releasing driver data structures can be kept until
drm_driver.release hook is called, i.e. when the last device
reference is dropped.
v4: Change functions prefix early->hw and late->sw
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210512142648.666476-3-andrey.grodzovsky@amd.com
On device removal reroute all CPU mappings to dummy page.
v3:
Remove loop to find DRM file and instead access it
by vma->vm_file->private_data. Move dummy page installation
into a separate function.
v4:
Map the entire BOs VA space into on demand allocated dummy page
on the first fault for that BO.
v5: Remove duplicate return.
v6: Polish ttm_bo_vm_dummy_page, remove superfluous code.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210512142648.666476-2-andrey.grodzovsky@amd.com
Let the user know what went wrong in drm_gem_fb_init_with_funcs
failure paths.
v2: use proper format specifier for size_t (kernel test robot)
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZS4eX0PtTuNvHezILcTWeWINOkRyMS4krXND3cIE@cp4-web-032.plabs.ch
This driver adds support for the ChromeOS EC ANX7688 HDMI to DP converter
For our use case, the only reason the Linux kernel driver is necessary is
to reject resolutions that require more bandwidth than what is available
on the DP side. DP bandwidth and lane count are reported by the bridge via
2 registers and, as far as we know, only chips that have a firmware
version greater than 0.85 support these two registers.
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
[The driver is OF only so should depends on CONFIG_OF]
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
[convert to i2c driver, rename to cros_ec_anx7688, add err checks]
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210518141927.24795-3-dafna.hirschfeld@collabora.com
The ti_sn_aux_transfer() function returns ssize_t (signed long). It's
supposed to return negative error codes or the number of bytes
transferred. The "ret" variable is int and the "len" variable is
unsigned int.
The problem is that with a ternary like this, the negative int is first
type promoted to unsigned int to match "len" at this point it is a high
positive value. Then when it is type promoted to ssize_t (s64) it
remains a high positive value instead of sign extending and becoming a
negative again.
Fix this by removing the ternary.
Fixes: b137406d96 ("drm/bridge: ti-sn65dsi86: If refclk, DP AUX can happen w/out pre-enable")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/YKOGogHasIyvF8nj@mwanda
Add suspend / resume hooks for anx7625 driver, that power off the device
on suspend and power on the device on resume if it was previously
powered.
Signed-off-by: Pi-Hsun Shih <pihsun@chromium.org>
Reviewed-by: Tzung-Bi Shih <tzungbi@google.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210517063553.554955-2-pihsun@chromium.org
The driver originally use an atomic_t for keep track of the power
status, which makes the driver more complicated than needed, and has
some race condition as it's possible to have the power on and power off
sequence going at the same time.
This patch remove the usage of the atomic_t power_status, and use the
kernel runtime power management framework instead.
Signed-off-by: Pi-Hsun Shih <pihsun@chromium.org>
Reviewed-by: Tzung-Bi Shih <tzungbi@google.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210517063553.554955-1-pihsun@chromium.org
In the original code if the "ctx = devm_kzalloc()" allocation failed
then we should have called of_node_put(ep); before returning. It's
actually a bit easier to do the allocation first before assigning
ep = of_graph_get_endpoint_by_regs().
Fixes: 988156dc2f ("drm: bridge: add it66121 driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YJ+ZgXTFa6voZuJG@mwanda
This code is passing the wrong variable to PTR_ERR() so it doesn't
return the correct error code.
Fixes: 988156dc2f ("drm: bridge: add it66121 driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YJ+ZX3BdKPAN0pUZ@mwanda
The virtio_gpu_init() will free vgdev and vgdev->vbufs on failure.
But such failure will be caught by virtio_gpu_probe() and then
virtio_gpu_release() will be called to do some cleanup which
will free vgdev and vgdev->vbufs again. So let's set dev->dev_private
to NULL to avoid double free.
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20210517084913.403-2-xieyongji@bytedance.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The dev->dev_private might not be allocated if virtio_gpu_pci_quirk()
or virtio_gpu_init() failed. In this case, we should avoid the cleanup
in virtio_gpu_release().
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20210517084913.403-1-xieyongji@bytedance.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The functionality is only implemented for legacy drivers. Mark the ioctl
as legacy and move the code behind CONFIG_DRM_LEGACY. If legacy drivers
are disabled, the ioctl call now returns -EINVAL instead of -EOPNOTSUPP.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210516195135.3755-1-tzimmermann@suse.de
When using a 24-bit panel on a 8-bit serial bus, the pixel clock
requested by the panel has to be multiplied by 3, since the subpixels
are shifted sequentially.
The code (in ingenic_drm_encoder_atomic_check) already computed
crtc_state->adjusted_mode->crtc_clock accordingly, but clk_set_rate()
used crtc_state->adjusted_mode->clock instead.
Fixes: 28ab7d35b6 ("drm/ingenic: Properly compute timings when using a 3x8-bit panel")
Cc: stable@vger.kernel.org # v5.10
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Tested-by: H. Nikolaus Schaller <hns@goldelico.com> # CI20/jz4780 (HDMI) and Alpha400/jz4730 (LCD)
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210323144008.166248-1-paul@crapouillou.net
This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1620801955-19188-1-git-send-email-zou_wei@huawei.com
Fix the following make W=1 kernel build warning:
drivers/gpu/drm/drm_context.c:136: warning: expecting prototype for drm_ctxbitmap_flush(). Prototype was for drm_legacy_ctxbitmap_flush() instead
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210513071918.1728535-1-yangyingliang@huawei.com
The drm_format_info() function returns NULL if the format is
unsupported, but the simplefb_get_validated_format() is expected to
return error pointers. If we propagate the NULL return then it will
lead to a NULL dereference in the callers. Swap the NULL and trade it
in for an ERR_PTR(-EINVAL).
Fixes: 11e8f5fd22 ("drm: Add simpledrm driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/YJ+aC47XX58ICXax@mwanda
In case of error, the function devm_ioremap() returns NULL pointer not ERR_PTR().
The IS_ERR() test in the return value check should be replaced with NULL test.
After that, the error code -ENOMEM should be returned.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Qiheng Lin <linqiheng@huawei.com>
Signed-off-by: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210514082812.1697-1-linqiheng@huawei.com
The allocation of fifo is lacking an allocation failure check, so
fix this by adding one.
In the case where fifo->static_buffer fails to be allocated the
error return path neglects to kfree the fifo object. Fix this by
adding in the missing kfree.
Kudos to Dan Carpenter for spotting the missing kzalloc failure
check.
Addresses-Coverity: ("Resource leak")
Fixes: 2cd80dbd35 ("drm/vmwgfx: Add basic support for SVGA3")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210514144930.89813-1-colin.king@canonical.com
GPUs with more than a single regulator (e.g. G72 on MT8183) will
require platform-specific handling for devfreq, for 2 reasons:
1. The opp core (drivers/opp/core.c:_generic_set_opp_regulator)
does not support multiple regulators, so we'll need custom
handlers.
2. Generally, platforms with 2 regulators have platform-specific
constraints on how the voltages should be set (e.g.
minimum/maximum voltage difference between them), so we
should not just create generic handlers that simply
change the voltages without taking care of those constraints.
Disable devfreq for now on those GPUs.
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210421132841.v13.3.I3af068abe30c9c85cabc4486385c52e56527a509@changeid
The proper metric for fence utilization over several
contexts is an harmonic mean, but such calculation is
prohibitive in kernel space, so the code approximates it.
Because the approximation diverges when one context has a
very small ratio compared with the other context, this change
filter out ratios smaller that 0.01%
v2: make the fence calculation static and initialize variables
within that function
v3: Fix warnings (Alex)
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: David M Nieto <david.nieto@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210513174539.27409-2-david.nieto@amd.com
There are two occurrances where objects are being free'd via
a put call and yet they are being referenced after this. Fix these
by adding in the missing continue statement so that the put on the
end of the loop is skipped over.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Addresses-Coverity: ("Use after free")
Fixes: 11e8f5fd22 ("drm: Add simpledrm driver")
Link: https://patchwork.freedesktop.org/patch/msgid/20210512203051.299026-1-colin.king@canonical.com
Add the missing unlock before return from function devm_aperture_acquire()
in the error handling case.
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: 730e7992dc ("drm/aperture: Add infrastructure for aperture ownership")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/1620895564-52367-1-git-send-email-zou_wei@huawei.com
struct resource start and end fields are not always long long,
so using %llx to print them can cause build warnings (below).
Fix these by using the special "%pr" for printing struct resource info.
../drivers/gpu/drm/tiny/simpledrm.c: In function ‘simpledrm_device_init_mm’:
../include/drm/drm_print.h:412:32: warning: format ‘%llx’ expects argument of type ‘long long unsigned int’, but argument 3 has type ‘resource_size_t {aka unsigned int}’ [-Wformat=]
../drivers/gpu/drm/tiny/simpledrm.c:533:54: note: format string is defined here
drm_err(dev, "could not acquire memory range [0x%llx:0x%llx]: error %d\n",
~~~^
%x
../include/drm/drm_print.h:412:32: warning: format ‘%llx’ expects argument of type ‘long long unsigned int’, but argument 4 has type ‘resource_size_t {aka unsigned int}’ [-Wformat=]
../drivers/gpu/drm/tiny/simpledrm.c:533:61: note: format string is defined here
drm_err(dev, "could not acquire memory range [0x%llx:0x%llx]: error %d\n",
~~~^
%x
Fixes: 4aae79f77e ("drm/simpledrm: Acquire memory aperture for framebuffer")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210512233459.19534-1-rdunlap@infradead.org
The pdev field got removed from struct drm_device recently. Replace
the invalid reference with an upcast from the struct's dev field.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: b347e04452 ("drm: Remove pdev field from struct drm_device")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20210512185527.26050-1-tzimmermann@suse.de
It should have been an OVERLAY from the beginning. The documentation
stipulates that there should be an unique PRIMARY plane per CRTC.
Fixes: fc1acf317b ("drm/ingenic: Add support for the IPU")
Cc: <stable@vger.kernel.org> # 5.8+
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Simon Ser <contact@emersion.fr>
Link: https://patchwork.freedesktop.org/patch/msgid/20210329175046.214629-2-paul@crapouillou.net
When devm_ioremap_resource() fails, a clear enough error message will be
printed by its subfunction __devm_ioremap_resource(). The error
information contains the device name, failure cause, and possibly resource
information.
Therefore, remove the error printing here to simplify code and reduce the
binary size.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210511090433.4396-1-thunder.leizhen@huawei.com
It's very confusing for userspace to have to deal with inconsistencies
here, and some drivers screwed this up a bit. Most just ommitted the
format list when they meant to say that only linear modifier is
allowed, but some also meant that only implied modifiers are
acceptable (because actually none of the planes registered supported
modifiers).
Now that this is all done consistently across all drivers, document
the rules and enforce it in the drm core.
v2:
- Make the capability a link (Simon)
- Note that all is lost before 5.1.
v3:
- Use drm_WARN_ON (Lyude)
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Cc: Simon Ser <contact@emersion.fr>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Cc: Pekka Paalanen <pekka.paalanen@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210506132343.2873699-1-daniel.vetter@ffwll.ch
Andrey Grodzovsky