Commit graph

249 commits

Author SHA1 Message Date
James Bottomley
e73823f7a2 [SCSI] libsas: implement > 16 byte CDB support
Remove the arbitrary expectation in libsas that all SCSI commands are 16 bytes
or less.  Instead do all copies via cmd->cmd_len (and use a pointer to this in
the libsas task instead of a copy).  Note that this still doesn't enable > 16
byte CDB support in the underlying drivers because their internal format has
to be fixed and the wire format of > 16 byte CDBs according to the SAS spec is
different.  the libsas drivers (isci, aic94xx, mvsas and pm8xxx are all
updated for this change.

Cc: Lukasz Dorau <lukasz.dorau@intel.com>
Cc: Maciej Patelczyk <maciej.patelczyk@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Jack Wang <xjtuwjp@gmail.com>
Cc: Lindar Liu <lindar_liu@usish.com>
Cc: Xiangliang Yu <yuxiangl@marvell.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-06-04 11:15:59 -07:00
James Bottomley
832e77bc11 Merge branch 'misc' into for-linus
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-05-10 07:53:40 -07:00
James Bottomley
aa9f8328fc [SCSI] sas: unify the pointlessly separated enums sas_dev_type and sas_device_type
These enums have been separate since the dawn of SAS, mainly because the
latter is a procotol only enum and the former includes additional state
for libsas.  The dichotomy causes endless confusion about which one you
should use where and leads to pointless warnings like this:

drivers/scsi/mvsas/mv_sas.c: In function 'mvs_update_phyinfo':
drivers/scsi/mvsas/mv_sas.c:1162:34: warning: comparison between 'enum sas_device_type' and 'enum sas_dev_type' [-Wenum-compare]

Fix by eliminating one of them.  The one kept is effectively the sas.h
one, but call it sas_device_type and make sure the enums are all
properly namespaced with the SAS_ prefix.

Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-05-10 07:47:52 -07:00
Linus Torvalds
4de13d7aa8 Merge branch 'for-3.10/core' of git://git.kernel.dk/linux-block
Pull block core updates from Jens Axboe:

 - Major bit is Kents prep work for immutable bio vecs.

 - Stable candidate fix for a scheduling-while-atomic in the queue
   bypass operation.

 - Fix for the hang on exceeded rq->datalen 32-bit unsigned when merging
   discard bios.

 - Tejuns changes to convert the writeback thread pool to the generic
   workqueue mechanism.

 - Runtime PM framework, SCSI patches exists on top of these in James'
   tree.

 - A few random fixes.

* 'for-3.10/core' of git://git.kernel.dk/linux-block: (40 commits)
  relay: move remove_buf_file inside relay_close_buf
  partitions/efi.c: replace useless kzalloc's by kmalloc's
  fs/block_dev.c: fix iov_shorten() criteria in blkdev_aio_read()
  block: fix max discard sectors limit
  blkcg: fix "scheduling while atomic" in blk_queue_bypass_start
  Documentation: cfq-iosched: update documentation help for cfq tunables
  writeback: expose the bdi_wq workqueue
  writeback: replace custom worker pool implementation with unbound workqueue
  writeback: remove unused bdi_pending_list
  aoe: Fix unitialized var usage
  bio-integrity: Add explicit field for owner of bip_buf
  block: Add an explicit bio flag for bios that own their bvec
  block: Add bio_alloc_pages()
  block: Convert some code to bio_for_each_segment_all()
  block: Add bio_for_each_segment_all()
  bounce: Refactor __blk_queue_bounce to not use bi_io_vec
  raid1: use bio_copy_data()
  pktcdvd: Use bio_reset() in disabled code to kill bi_idx usage
  pktcdvd: use bio_copy_data()
  block: Add bio_copy_data()
  ...
2013-05-08 10:13:35 -07:00
Lukasz Dorau
d4a2618fa7 [SCSI] libsas: fix handling vacant phy in sas_set_ex_phy()
If a result of the SMP discover function is PHY VACANT,
the content of discover response structure (dr) is not valid.
It sometimes happens that dr->attached_sas_addr can contain
even SAS address of other phy. In such case an invalid phy
is created, what causes NULL pointer dereference during
destruction of expander's phys.

So if a result of SMP function is PHY VACANT, the content of discover
response structure (dr) must not be copied to phy structure.

This patch fixes the following bug:

BUG: unable to handle kernel NULL pointer dereference at 0000000000000030
IP: [<ffffffff811c9002>] sysfs_find_dirent+0x12/0x90
Call Trace:
  [<ffffffff811c95f5>] sysfs_get_dirent+0x35/0x80
  [<ffffffff811cb55e>] sysfs_unmerge_group+0x1e/0xb0
  [<ffffffff813329f4>] dpm_sysfs_remove+0x24/0x90
  [<ffffffff8132b0f4>] device_del+0x44/0x1d0
  [<ffffffffa016fc59>] sas_rphy_delete+0x9/0x20 [scsi_transport_sas]
  [<ffffffffa01a16f6>] sas_destruct_devices+0xe6/0x110 [libsas]
  [<ffffffff8107ac7c>] process_one_work+0x16c/0x350
  [<ffffffff8107d84a>] worker_thread+0x17a/0x410
  [<ffffffff81081b76>] kthread+0x96/0xa0
  [<ffffffff81464944>] kernel_thread_helper+0x4/0x10

Signed-off-by: Lukasz Dorau <lukasz.dorau@intel.com>
Signed-off-by: Pawel Baldysiak <pawel.baldysiak@intel.com>
Reviewed-by: Maciej Patelczyk <maciej.patelczyk@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-04-06 11:36:54 +01:00
John Gong
95c9f4d4da [SCSI] libsas: use right function to alloc smp response
In fact the disc_resp buffer will be overwrite by smp response, so we never
found this typo, correct it by using the right one.

Signed-off-by: John Gong <john_gong@usish.com>
Signed-off-by: Jack Wang <jack_wang@usish.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-04-06 11:07:21 +01:00
Kent Overstreet
2f477877f8 block: Remove some unnecessary bi_vcnt usage
More prep work for immutable bvecs/effecient bio splitting - usage of
bi_vcnt has to be auditing, so getting rid of all the unnecessary usage
makes that easier.

Plus, bio_segments() is really what this code wanted, as it respects the
current value of bi_idx.

Signed-off-by: Kent Overstreet <koverstreet@google.com>
CC: Jens Axboe <axboe@kernel.dk>
CC: Eric Moore <Eric.Moore@lsi.com>
CC: "James E.J. Bottomley" <JBottomley@parallels.com>
CC: linux-scsi@vger.kernel.org
2013-03-23 14:15:31 -07:00
Masanari Iida
02582e9bcc treewide: fix typo of "suport" in various comments and Kconfig
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-11-19 14:16:09 +01:00
Dan Williams
8d8e7d1314 [SCSI] libsas, ipr: cleanup ata_host flags initialization via ata_host_init
libsas and ipr pass flags to ata_host_init that are meant for the port.

ata_host flags:
	ATA_HOST_SIMPLEX	= (1 << 0),	/* Host is simplex, one DMA channel per host only */
	ATA_HOST_STARTED	= (1 << 1),	/* Host started */
	ATA_HOST_PARALLEL_SCAN	= (1 << 2),	/* Ports on this host can be scanned in parallel */
	ATA_HOST_IGNORE_ATA	= (1 << 3),	/* Ignore ATA devices on this host. */

flags passed by libsas:
	ATA_FLAG_SATA		= (1 << 1),
	ATA_FLAG_PIO_DMA	= (1 << 7), /* PIO cmds via DMA */
	ATA_FLAG_NCQ		= (1 << 10), /* host supports NCQ */

The only one that aliases is ATA_HOST_STARTED which is a 'don't care' in
the libsas and ipr cases since ata_hosts from these sources are not
registered with libata.

Reported-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Brian King <brking@us.ibm.com>
Acked-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-08-24 13:10:24 +04:00
Dan Williams
303694eeee [SCSI] libsas: suspend / resume support
libsas power management routines to suspend and recover the sas domain
based on a model where the lldd is allowed and expected to be
"forgetful".

sas_suspend_ha - disable event processing allowing the lldd to take down
                 links without concern for causing hotplug events.
                 Regardless of whether the lldd actually posts link down
                 messages libsas notifies the lldd that all
                 domain_devices are gone.

sas_prep_resume_ha - on the way back up before the lldd starts link
                     training clean out any spurious events that were
                     generated on the way down, and re-enable event
                     processing

sas_resume_ha - after the lldd has started and decided that all phys
		have posted link-up events this routine is called to let
		libsas start it's own timeout of any phys that did not
		resume.  After the timeout an lldd can cancel the
                phy teardown by posting a link-up event.

Storage for ex_change_count (u16) and phy_change_count (u8) are changed
to int so they can be set to -1 to indicate 'invalidated'.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Jacek Danecki <jacek.danecki@intel.com>
Tested-by: Maciej Patelczyk <maciej.patelczyk@intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-08-24 13:10:23 +04:00
Dan Williams
2955b47d2c [SCSI] async: introduce 'async_domain' type
This is in preparation for teaching async_synchronize_full() to sync all
pending async work, and not just on the async_running domain.  This
conversion is functionally equivalent, just embedding the existing list
in a new async_domain type.

The .registered attribute is used in a later patch to distinguish
between domains that want to be flushed by async_synchronize_full()
versus those that only expect async_synchronize_{full|cookie}_domain to
be used for flushing.

[jejb: add async.h to scsi_priv.h for struct async_domain]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Tested-by: Eldad Zack <eldad@fogrefinery.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-07-20 09:05:54 +01:00
Dan Williams
f0bf750c2d [SCSI] libsas: trim sas_task of slow path infrastructure
The timer and the completion are only used for slow path tasks (smp, and
lldd tmfs), yet we incur the allocation space and cpu setup time for
every fast path task.

Cc: Xiangliang Yu <yuxiangl@marvell.com>
Acked-by: Jack Wang <jack_wang@usish.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-07-20 08:58:54 +01:00
Dan Williams
a494fd5bd9 [SCSI] libsas: drop sata port multiplier infrastructure
On the way to add a new sata_device field, noticed that libsas is
carrying port multiplier infrastructure that is explicitly disabled by
sas_discover_sata().  The aic94xx touches the unused port_no, so leave
that field in case there was some use for it.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-07-20 08:58:53 +01:00
Dan Williams
b17caa174a [SCSI] libsas: fix sas_discover_devices return code handling
commit 198439e4 [SCSI] libsas: do not set res = 0 in sas_ex_discover_dev()
commit 19252de6 [SCSI] libsas: fix wide port hotplug issues

The above commits seem to have confused the return value of
sas_ex_discover_dev which is non-zero on failure and
sas_ex_join_wide_port which just indicates short circuiting discovery on
already established ports.  The result is random discovery failures
depending on configuration.

Calls to sas_ex_join_wide_port are the source of the trouble as its
return value is errantly assigned to 'res'.  Convert it to bool and stop
returning its result up the stack.

Cc: <stable@vger.kernel.org>
Tested-by: Dan Melnic <dan.melnic@amd.com>
Reported-by: Dan Melnic <dan.melnic@amd.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Jack Wang <jack_wang@usish.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-07-20 08:58:53 +01:00
Dan Williams
26f2f199ff [SCSI] libsas: continue revalidation
Continue running revalidation until no more broadcast devices are
discovered.  Fixes cases where re-discovery completes too early in a
domain with multiple expanders with pending re-discovery events.
Servicing BCNs can get backed up behind error recovery.

Cc: <stable@vger.kernel.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-07-20 08:58:52 +01:00
Jeff Skirvin
b2311a2875 [SCSI] libsas: sas_rediscover_dev did not look at the SMP exec status.
The discovery function "sas_rediscover_dev" had two bugs: 1) it did
not pay attention to the return status from the SMP task execution;
2) the stack variable used for the returned SAS address was compared
against 0 without being initialized.

Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-07-20 08:58:52 +01:00
Dan Williams
e7db822996 [SCSI] libsas: use ->lldd_I_T_nexus_reset for ->eh_bus_reset_handler
sas_eh_bus_reset_handler() amounts to sas_phy_reset() without
notification of the reset to the lldd.  If this is triggered from
eh-cmnd recovery there may be sas_tasks for the lldd to terminate, so
->lldd_I_T_nexus_reset is warranted.

Cc: Xiangliang Yu <yuxiangl@marvell.com>
Cc: Luben Tuikov <ltuikov@yahoo.com>
Cc: Jack Wang <jack_wang@usish.com>
Reviewed-by: Jacek Danecki <jacek.danecki@intel.com>
[jacek: modify pm8001_I_T_nexus_reset to return -ENODEV]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-07-20 08:58:51 +01:00
Dan Williams
9524c68218 [SCSI] libsas: add sas_eh_abort_handler
When recovering failed eh-cmnds let the lldd attempt an abort via
scsi_abort_eh_cmnd before escalating.

Reviewed-by: Jacek Danecki <jacek.danecki@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-07-20 08:58:50 +01:00
Dan Williams
5db45bdc87 [SCSI] libsas: enforce eh strategy handlers only in eh context
The strategy handlers may be called in places that are problematic for
libsas (i.e. sata resets outside of domain revalidation filtering /
libata link recovery), or problematic for userspace (non-blocking ioctl
to sleeping reset functions).  However, these routines are also called
for eh escalations and recovery of scsi_eh_prep_cmnd(), so permit them
as long as we are running in the host's error handler, otherwise arrange
for them to be triggered in eh_context.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-07-20 08:58:50 +01:00
Maciej Trela
36fed49805 [SCSI] libsas: cleanup spurious calls to scsi_schedule_eh
eh is woken up automatically by the presence of failed commands,
scsi_schedule_eh is reserved for cases where there are no failed
commands.  This guarantees that host_eh_sceduled is only incremented
when an explicit eh request is made.

Reviewed-by: Jacek Danecki <jacek.danecki@intel.com>
Signed-off-by: Maciej Trela <maciej.trela@intel.com>
[fixed spurious delete of sas_ata_task_abort]
Signed-off-by: Artur Wojcik <artur.wojcik@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-07-20 08:58:47 +01:00
Dan Williams
e4a9c3732c [SCSI] libata, libsas: introduce sched_eh and end_eh port ops
When managing shost->host_eh_scheduled libata assumes that there is a
1:1 shost-to-ata_port relationship.  libsas creates a 1:N relationship
so it needs to manage host_eh_scheduled cumulatively at the host level.
The sched_eh and end_eh port port ops allow libsas to track when domain
devices enter/leave the "eh-pending" state under ha->lock (previously
named ha->state_lock, but it is no longer just a lock for ha->state
changes).

Since host_eh_scheduled indicates eh without backing commands pinning
the device it can be deallocated at any time.  Move the taking of the
domain_device reference under the port_lock to guarantee that the
ata_port stays around for the duration of eh.

Reviewed-by: Jacek Danecki <jacek.danecki@intel.com>
Acked-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-07-20 08:58:45 +01:00
Dan Williams
6ef1b512f4 [SCSI] libsas: fix taskfile corruption in sas_ata_qc_fill_rtf
fill_result_tf() grabs the taskfile flags from the originating qc which
sas_ata_qc_fill_rtf() promptly overwrites.  The presence of an
ata_taskfile in the sata_device makes it tempting to just copy the full
contents in sas_ata_qc_fill_rtf().  However, libata really only wants
the fis contents and expects the other portions of the taskfile to not
be touched by ->qc_fill_rtf.  To that end store a fis buffer in the
sata_device and use ata_tf_from_fis() like every other ->qc_fill_rtf()
implementation.

Cc: <stable@vger.kernel.org>
Reported-by: Praveen Murali <pmurali@logicube.com>
Tested-by: Praveen Murali <pmurali@logicube.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-07-08 09:49:14 +01:00
Dan Williams
b4698d8858 [SCSI] Revert "[SCSI] libsas: fix sas port naming"
This reverts commit a692b0eec5.

Tom reports:

[    8.741033] ------------[ cut here ]------------
[    8.741038] WARNING: at fs/sysfs/dir.c:508 sysfs_add_one+0xc1/0xf0()
[    8.741040] Hardware name: To Be Filled By O.E.M.
[    8.741041] sysfs: cannot create duplicate filename

...and missing 2 out of 4 drives connected to mvsas.  Commit a692b0ee
made the assumption that all the phy ids an lldd registers to libsas are
unique.  However, in the "multi-chip" case mvsas does a rather annoying
duplication of phy ids in the array passed to libsas.  So, for example,
chip0 has phy0-3 at ha phy index 0-3 and chip1 has its phy0-3 at ha phy
index 4-7.  The more natural model would be to create a scsi_host (and
sas_ha) per chip (controller), but for now revert the naming fix which
unfortunately means dealing with unpredictable end-device names for a
bit longer.

Cc: Xiangliang Yu <yuxiangl@marvell.com>
Cc: Patrick Thomson <patrick.s.thomson@intel.com>
Reported-by: Tom Rini <trini@ti.com>
Tested-by: Tom Rini <trini@ti.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-04-23 12:15:53 +01:00
Dan Williams
7d1d865181 [SCSI] libsas: fix false positive 'device attached' conditions
Normalize phy->attached_sas_addr to return a zero-address in the case
when device-type == NO_DEVICE or the linkrate is invalid to handle
expanders that put non-zero sas addresses in the discovery response:

 sas: ex 5001b4da000f903f phy02:U:0 attached: 0100000000000000 (no device)
 sas: ex 5001b4da000f903f phy01:U:0 attached: 0100000000000000 (no device)
 sas: ex 5001b4da000f903f phy03:U:0 attached: 0100000000000000 (no device)
 sas: ex 5001b4da000f903f phy00:U:0 attached: 0100000000000000 (no device)

Reported-by: Andrzej Jakowski <andrzej.jakowski@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-04-23 12:14:09 +01:00
Dan Williams
b202445925 [SCSI] libsas, libata: fix start of life for a sas ata_port
This changes the ordering of initialization and probing events from:
  1/ allocate rphy in PORTE_BYTES_DMAED, DISCE_REVALIDATE_DOMAIN
  2/ allocate ata_port and schedule port probe in DISCE_PROBE
...to:
  1/ allocate ata_port in PORTE_BYTES_DMAED, DISCE_REVALIDATE_DOMAIN
  2/ allocate rphy in PORTE_BYTES_DMAED, DISCE_REVALIDATE_DOMAIN
  3/ schedule port probe in DISCE_PROBE

This ordering prevents PHYE_SIGNAL_LOSS_EVENTS from sneaking in to
destrory ata devices before they have been fully initialized:

  BUG: unable to handle kernel paging request at 0000000000003b10
  IP: [<ffffffffa0053d7e>] sas_ata_end_eh+0x12/0x5e [libsas]
  ...
  [<ffffffffa004d1af>] sas_unregister_common_dev+0x78/0xc9 [libsas]
  [<ffffffffa004d4d4>] sas_unregister_dev+0x4f/0xad [libsas]
  [<ffffffffa004d5b1>] sas_unregister_domain_devices+0x7f/0xbf [libsas]
  [<ffffffffa004c487>] sas_deform_port+0x61/0x1b8 [libsas]
  [<ffffffffa004bed0>] sas_phye_loss_of_signal+0x29/0x2b [libsas]

...and kills the awkward "sata domain_device briefly existing in the
domain without an ata_port" state.

Reported-by: Michal Kosciowski <michal.kosciowski@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-04-23 12:11:47 +01:00
Dan Williams
0f3fce5cc7 [SCSI] libsas: fix ata_eh clobbering ex_phys via smp_ata_check_ready
The check_ready implementation in the expander-attached ata device case
polls on sas_ex_phy_discover().  The effect is that the ex_phy fields
(critically ->attached_sas_addr) can change.  When ata_eh ends and
libsas comes along to revalidate the domain
sas_unregister_devs_sas_addr() can fail to lookup devices to remove, or
fail to re-add an ata device that ata_eh marked as disabled.  So change
the code to skip the sas_address and change count updates when ata_eh is
active.

Cc: Jack Wang <jack_wang@usish.com>
Tested-by: Maciej Patelczyk <maciej.patelczyk@intel.com>
Tested-by: Bartek Nowakowski <bartek.nowakowski@intel.com>
Tested-by: Jacek Danecki <jacek.danecki@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-04-23 12:10:34 +01:00
Dan Williams
9487669fc2 [SCSI] libsas: unify domain_device sas_rphy lifetimes
Since the domain_device can out live the scsi_target we need the rphy to
follow suit otherwise we run into issues like:

  BUG: unable to handle kernel NULL pointer dereference at 0000000000000050
  IP: [<ffffffffa011561b>] sas_ata_printk+0x43/0x6f [libsas]
  PGD 0
  Oops: 0000 [#1] SMP
  CPU 1
  Modules linked in: ses enclosure isci libsas scsi_transport_sas fuse sunrpc cpufreq_ondemand acpi_cpufreq freq_table mperf microcode pcspkr igb joydev iTCO_wdt ioatdma iTCO_vendor_support i2c_i801 i2c_core dca wmi hed ipv6 pata_acpi ata_generic [last unloaded: scsi_wait_scan]

  Pid: 129, comm: kworker/u:3 Not tainted 3.3.0-rc5-isci+ #1 Intel Corporation SandyBridge Platform/To be filled by O.E.M.
  RIP: 0010:[<ffffffffa011561b>] [<ffffffffa011561b>] sas_ata_printk+0x43/0x6f [libsas]
  RSP: 0018:ffff88042232dd70 EFLAGS: 00010282
  RAX: 0000000000000000 RBX: ffff8804283165b8 RCX: ffff88042232dda0
  RDX: ffff88042232dd78 RSI: ffff8804283165b8 RDI: ffffffffa01188d7
  RBP: ffff88042232ddd0 R08: ffff880388454000 R09: ffff8803edfde1f8
  R10: ffff8803edfde1f8 R11: ffff8803edfde1f8 R12: ffff880428316750
  R13: ffff880388454000 R14: ffff8803f88b31d0 R15: ffff8803f8b21d50
  FS: 0000000000000000(0000) GS:ffff88042ee20000(0000) knlGS:0000000000000000
  CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
  CR2: 0000000000000050 CR3: 0000000001a05000 CR4: 00000000000406e0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
  Process kworker/u:3 (pid: 129, threadinfo ffff88042232c000, task ffff88042230c920)
  Stack:
  0000000000000000 ffff880400000018 ffff88042232dde0 ffff88042232dda0
  ffffffffa01188c4 ffff88042ee93af0 ffff88042232ddb0 ffffffff8100e047
  ffff88042232de10 ffff880420e5a2c8 ffff8803f8b21d50 ffff8803edfde1f8
  Call Trace:
  [<ffffffff8100e047>] ? load_TLS+0xb/0xf
  [<ffffffffa01156ad>] async_sas_ata_eh+0x66/0x95 [libsas]
  [<ffffffff810655e1>] async_run_entry_fn+0x9e/0x131

Reported-by: Tom Jackson <thomas.p.jackson@intel.com>
Tested-by: Tom Jackson <thomas.p.jackson@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-04-23 12:08:56 +01:00
Dan Williams
ec236e5267 [SCSI] libsas: fix sas_get_port_device regression
Commit 899fcf4 "[SCSI] libsas: set attached device type and target
protocols for local phys" setup 'phy' to be dereferenced after
list_for_each_entry(phy, &port->phy_list, port_phy_el) (i.e. phy ==
&port->phy_list) resulting in reports like:

  BUG: unable to handle kernel NULL pointer dereference at 00000000000002b0
  IP: [<ffffffffa00ce948>] sas_discover_domain+0x29e/0x4fb [libsas]

...fix by deferring sas_phy_set_target() to the end of
sas_get_port_device().

Reported-by: Tom Jackson <thomas.p.jackson@intel.com>
Tested-by: Tom Jackson <thomas.p.jackson@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-04-23 12:07:25 +01:00
Thomas Jackson
1699490db3 [SCSI] libsas: fix sas_find_bcast_phy() in the presence of 'vacant' phys
If an expander reports 'PHY VACANT' for a phy index prior to the one
that generated a BCN libsas fails rediscovery.  Since a vacant phy is
defined as a valid phy index that will never have an attached device
just continue the search.

Cc: <stable@vger.kernel.org>
Signed-off-by: Thomas Jackson <thomas.p.jackson@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-04-23 12:06:16 +01:00
Dan Williams
22b9153faa [SCSI] libsas: introduce sas_work to fix sas_drain_work vs sas_queue_work
When requeuing work to a draining workqueue the last work instance may
not be idle, so sas_queue_work() must not touch work->entry.  Introduce
sas_work with a drain_node list_head to have a private list for
collecting work deferred due to drain collision.

Fixes reports like:
  BUG: unable to handle kernel NULL pointer dereference at           (null)
  IP: [<ffffffff810410d4>] process_one_work+0x2e/0x338

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-04-23 12:03:39 +01:00
Linus Torvalds
424a6f6ef9 SCSI updates on 20120319
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.18 (GNU/Linux)
 
 iQEcBAABAgAGBQJPZxSnAAoJEDeqqVYsXL0M0Y4IAMX0vrTVZbg6psA5/gMcWGRP
 CkFXEQ8n0PL2SCaj6BoDqamJFe5Nc7dnqxM0fGawB4S9vr3rHhiOlwO+NbV9zFYC
 2skBTpeL3sjgtN/jTBdfeeAa7xTYpu/XGyei0NS1A5c2AyMVXV0uYV2s4VNZxe44
 tVIn1OEzM2giZ9EB1OZslDMrg5XXm3MBIUECP0LbWUhBm/35caSFKzMXRwhh7WiK
 +AVmc2AZYtdEwuknDyiH7KlsaoB3vGL9pPrAUJzIgEhy2pOo2A7W72HfA4Fj+y6a
 uF9HBS5zciMp1+sGWry62AjNbWgin9BRlozBEO/lJhIfMGDV1nXEIJsOkOgkdoE=
 =1TxB
 -----END PGP SIGNATURE-----

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6

SCSI updates from James Bottomley:
 "The update includes the usual assortment of driver updates (lpfc,
  qla2xxx, qla4xxx, bfa, bnx2fc, bnx2i, isci, fcoe, hpsa) plus a huge
  amount of infrastructure work in the SAS library and transport class
  as well as an iSCSI update.  There's also a new SCSI based virtio
  driver."

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (177 commits)
  [SCSI] qla4xxx: Update driver version to 5.02.00-k15
  [SCSI] qla4xxx: trivial cleanup
  [SCSI] qla4xxx: Fix sparse warning
  [SCSI] qla4xxx: Add support for multiple session per host.
  [SCSI] qla4xxx: Export CHAP index as sysfs attribute
  [SCSI] scsi_transport: Export CHAP index as sysfs attribute
  [SCSI] qla4xxx: Add support to display CHAP list and delete CHAP entry
  [SCSI] iscsi_transport: Add support to display CHAP list and delete CHAP entry
  [SCSI] pm8001: fix endian issue with code optimization.
  [SCSI] pm8001: Fix possible racing condition.
  [SCSI] pm8001: Fix bogus interrupt state flag issue.
  [SCSI] ipr: update PCI ID definitions for new adapters
  [SCSI] qla2xxx: handle default case in qla2x00_request_firmware()
  [SCSI] isci: improvements in driver unloading routine
  [SCSI] isci: improve phy event warnings
  [SCSI] isci: debug, provide state-enum-to-string conversions
  [SCSI] scsi_transport_sas: 'enable' phys on reset
  [SCSI] libsas: don't recover end devices attached to disabled phys
  [SCSI] libsas: fixup target_port_protocols for expanders that don't report sata
  [SCSI] libsas: set attached device type and target protocols for local phys
  ...
2012-03-22 12:55:29 -07:00
Cong Wang
77dfce076c scsi: remove the second argument of k[un]map_atomic()
Signed-off-by: Cong Wang <amwang@redhat.com>
2012-03-20 21:48:19 +08:00
Dan Williams
26a2e68f81 [SCSI] libsas: don't recover end devices attached to disabled phys
If userspace has decided to disable a phy the kernel should honor that
and not inadvertantly re-enable the phy via error recovery.  This is
more straightforward in the sata case where link recovery (via
libata-eh) is separate from sas_task cancelling in libsas-eh.  Teach
libsas to accept -ENODEV as a successful response from I_T_nexus_reset
('successful' in terms of not escalating further).

This is a more comprehensive fix then "libsas: don't recover 'gone'
devices in sas_ata_hard_reset()", as it is no longer sata-specific.

aic94xx does check the return value from sas_phy_reset() so if the phy
is disabled we proceed with clearing the I_T_nexus.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-29 15:42:51 -06:00
Dan Williams
77c309f3cd [SCSI] libsas: fixup target_port_protocols for expanders that don't report sata
If discovery returns 0 for target_port_protocols but shows an attached
sata device, just report SAS_PROTOCOL_SATA in the identify data so
userspace can reliably search for sata devices in the domain.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-29 15:41:51 -06:00
Dan Williams
899fcf40f3 [SCSI] libsas: set attached device type and target protocols for local phys
Before:
$ cat /sys/class/sas_phy/phy-6\:3/device_type
none
$ cat /sys/class/sas_phy/phy-6\:3/target_port_protocols
none

After:
$ cat /sys/class/sas_phy/phy-6\:3/device_type
end device
$ cat /sys/class/sas_phy/phy-6\:3/target_port_protocols
sata

Also downgrade the phy_list_lock to _irq instead of _irqsave since
libsas will never call sas_get_port_device with interrupts disbled.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-29 15:40:33 -06:00
Dan Williams
9a10b33caf [SCSI] libsas: revert ata srst
libata issues follow up srsts when the controller has a hard time
recording the signature-fis after a reset, or if the link supports port
multipliers.  libsas does not support port multipliers and no current
libsas lldds appear to need help retrieving the signature fis.  Revert
it for now to remove confusion.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-29 15:39:25 -06:00
Dan Williams
840234745e [SCSI] libsas: fix lifetime of SAS_HA_FROZEN
Until all sas_tasks are known to no longer be in-flight this flag gates late
completions from colliding with error handling.  However, it must be cleared
prior to the submission of scsi_send_eh_cmnd() requests, otherwise those
commands will never be completed correctly.

This was spotted by slub debug:
 =============================================================================
 BUG sas_task: Objects remaining on kmem_cache_close()
 -----------------------------------------------------------------------------

 INFO: Slab 0xffffea001f0eba00 objects=34 used=1 fp=0xffff8807c3aecb00 flags=0x8000000000004080
 Pid: 22919, comm: modprobe Not tainted 3.2.0-isci+ #2
 Call Trace:
  [<ffffffff810fcdcd>] slab_err+0xb0/0xd2
  [<ffffffff810e1c50>] ? free_percpu+0x31/0x117
  [<ffffffff81100122>] ? kzalloc+0x14/0x16
  [<ffffffff81100122>] ? kzalloc+0x14/0x16
  [<ffffffff81100486>] kmem_cache_destroy+0x11d/0x270
  [<ffffffffa0112bdc>] sas_class_exit+0x10/0x12 [libsas]
  [<ffffffff81078fba>] sys_delete_module+0x1c4/0x23c
  [<ffffffff814797ba>] ? sysret_check+0x2e/0x69
  [<ffffffff8126479e>] ? trace_hardirqs_on_thunk+0x3a/0x3f
  [<ffffffff81479782>] system_call_fastpath+0x16/0x1b
 INFO: Object 0xffff8807c3aed280 @offset=21120
 INFO: Allocated in sas_alloc_task+0x22/0x90 [libsas] age=4615311 cpu=2 pid=12966
  __slab_alloc.clone.3+0x1d1/0x234
  kmem_cache_alloc+0x52/0x10d
  sas_alloc_task+0x22/0x90 [libsas]
  sas_queuecommand+0x20e/0x230 [libsas]
  scsi_send_eh_cmnd+0xd1/0x30c
  scsi_eh_try_stu+0x4f/0x6b
  scsi_eh_ready_devs+0xba/0x6ef
  sas_scsi_recover_host+0xa35/0xab1 [libsas]
  scsi_error_handler+0x14b/0x5fa
  kthread+0x9d/0xa5
  kernel_thread_helper+0x4/0x10

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-29 15:38:09 -06:00
Dan Williams
9508a66f89 [SCSI] libsas: async ata scanning
libsas ata error handling is already async but this does not help the
scan case.  Move initial link recovery out from under host->scan_mutex,
and delay synchronization with eh until after all port probe/recovery
work has been queued.

Device ordering is maintained with scan order by still calling
sas_rphy_add() in order of domain discovery.

Since we now scan the domain list when invoking libata-eh we need to be
careful to check for fully initialized ata ports.

Acked-by: Jack Wang <jack_wang@usish.com>
Acked-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-29 15:35:41 -06:00
Dan Williams
92625f9bff [SCSI] libsas: restore scan order
ata devices are always scanned after ssp.  Prior to the ata error
handling reworks libsas would tend to scan devices in ascending expander
phy order.  Restore this ordering by deferring ssp discovery to a
DISCE_PROBE event, and keep the probe order consistent with the
discovery order, not the placement of sata devices.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-29 15:34:19 -06:00
Dan Williams
c666aae691 [SCSI] libsas: delete device on sas address changed
If the phy is attached to a new sas address unregister the first address
before processing the new attachment.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-29 15:33:39 -06:00
Dan Williams
354cf82980 [SCSI] libsas: let libata recover links that fail to transmit initial sig-fis
libsas fails to discover all sata devices in the domain.  If a device fails
negotiation and does not transmit a signature fis the link needs recovery.
libata already understands how to manage slow to come up links, so treat these
conditions as ata device attach events for the purposes of creating an
ata_port.  This allows libata to manage retrying link bring up.

Rediscovery is modified to be careful about checking changes in dev_type.  It
looks like libsas leaks old devices if the sas address changes, but that's a
fix for another patch.

Acked-by: Jack Wang <jack_wang@usish.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-29 15:33:02 -06:00
Dan Williams
a692b0eec5 [SCSI] libsas: fix sas port naming
Make sas-port naming consistent with the expander-attached case whereby
the phy-id is the last digit in the port name.  Otherwise we get the
random behavior of the allocation order.

Reported-by: Patrick Thomson <patrick.s.thomson@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-29 15:29:06 -06:00
Dan Williams
d214d81e88 [SCSI] libsas: improve debug statements
It's difficult to determine which domain_device is triggering error recovery,
so convert messages like:

  sas: ex 5001b4da000e703f phy08:T attached: 5001b4da000e7028
  sas: ex 5001b4da000e703f phy09:T attached: 5001b4da000e7029
  ...
  ata7: sas eh calling libata port error handler
  ata8: sas eh calling libata port error handler

...into:

  sas: ex 5001517e85cfefff phy05:T:9 attached: 5001517e85cfefe5 (stp)
  sas: ex 5001517e3b0af0bf phy11:T:8 attached: 5001517e3b0af0ab (stp)
  ...
  sas: ata7: end_device-21:1: dev error handler
  sas: ata8: end_device-20:0:5: dev error handler

which shows attached link rate, device type, and associates a
domain_device with its ata_port id to correlate messages emitted from
libata-eh.

As Doug notes, we can also take the opportunity to clarify expander phy
routing capabilities.

[dgilbert@interlog.com: clarify table2table with 'U']
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-29 15:28:24 -06:00
Maciej Trela
fdfd9d1b89 [SCSI] libsas: kill spurious sas_put_device
Holdover from a patch rework, prior to the addition of SAS_DEV_DESTROY
we were holding a reference while the destruct was pending in case the
domain was torn down before the desctruct event ran.  That case is
covered by SAS_DEV_DESTROY, and the sas_put_device() just corrupts freed
memory, or worse frees the memory while another agent holds a reference.

Signed-off-by: Maciej Trela <maciej.trela@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-29 15:27:44 -06:00
Dan Williams
5d7f6d1071 [SCSI] libsas: fix sas_unregister_ports vs sas_drain_work
We need to hold drain_mutex across the unregistration as port down events
queue device removal as chained events, so we need to make sure no other
drainers are active.

[ 1118.673968] WARNING: at kernel/workqueue.c:996 __queue_work+0x11a/0x326()
[ 1118.681982] Hardware name: S2600CP
[ 1118.686193] Modules linked in: isci(-) libsas scsi_transport_sas nls_utf8
ipv6 uinput sg iTCO_wdt iTCO_vendor_support i2c_i801 i2c_core ioatdma dca
sd_mod sr_mod cdrom ahci libahci libata [last unloaded: scsi_transport_sas]
[ 1118.709893] Pid: 6831, comm: rmmod Not tainted 3.2.0-isci+ #1
[ 1118.716727] Call Trace:
[ 1118.719867]  [<ffffffff8103e9f5>] warn_slowpath_common+0x85/0x9d
[ 1118.727000]  [<ffffffff8103ea27>] warn_slowpath_null+0x1a/0x1c
[ 1118.733942]  [<ffffffff81056d44>] __queue_work+0x11a/0x326
[ 1118.740481]  [<ffffffff81056f99>] queue_work_on+0x1b/0x22
[ 1118.746925]  [<ffffffff81057106>] queue_work+0x37/0x3e
[ 1118.753105]  [<ffffffffa0120e05>] ? sas_discover_event+0x55/0x82 [libsas]
[ 1118.761094]  [<ffffffff813217c3>] scsi_queue_work+0x42/0x44
[ 1118.767717]  [<ffffffffa0120e19>] sas_discover_event+0x69/0x82 [libsas]
[ 1118.775509]  [<ffffffffa0120f5b>] sas_unregister_dev+0xc3/0xcc [libsas]
[ 1118.783319]  [<ffffffffa0120fae>] sas_unregister_domain_devices+0x4a/0xc8 [libsas]
[ 1118.792731]  [<ffffffffa0120071>] sas_deform_port+0x60/0x1a6 [libsas]
[ 1118.800339]  [<ffffffffa01201ea>] sas_unregister_ports+0x33/0x44 [libsas]
[ 1118.808342]  [<ffffffffa011f7e5>] sas_unregister_ha+0x41/0x6b [libsas]
[ 1118.816055]  [<ffffffffa0134055>] isci_unregister+0x22/0x4d [isci]
[ 1118.823384]  [<ffffffffa0143040>] isci_pci_remove+0x2e/0x60 [isci]

Reported-by: Jacek Danecki <jacek.danecki@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-29 15:27:09 -06:00
Dan Williams
ab5266335b [SCSI] libsas: route local link resets through ata-eh
Similar to the conversion of the transport-class reset we want bsg
initiated resets to be managed by libata.

Reported-by: Jacek Danecki <jacek.danecki@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-29 15:25:32 -06:00
Dan Williams
d230ce691c [SCSI] libsas: fix mixed topology recovery
If we have a domain with sas and sata devices there may still be sas
recovery actions to take after peeling off the commands to send to
libata.

Reported-by: Andrzej Jakowski <andrzej.jakowski@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-29 15:23:24 -06:00
Dan Williams
8abda4d28a [SCSI] libsas: close scsi_remove_target() vs libata-eh race
ata_port lifetime in libata follows the host.  In libsas it follows the
scsi_target.  Once scsi_remove_device() has caused all commands to be
completed it allows scsi_remove_target() to immediately proceed to
freeing the ata_port causing bug reports like:

[  848.393333] BUG: spinlock bad magic on CPU#4, kworker/u:2/5107
[  848.400262] general protection fault: 0000 [#1] SMP
[  848.406244] CPU 4
[  848.408310] Modules linked in: nls_utf8 ipv6 uinput i2c_i801 i2c_core iTCO_wdt iTCO_vendor_support ioatdma dca sg sd_mod sr_mod cdrom ahci libahci isci libsas libata scsi_transport_sas [last unloaded: scsi_wait_scan]
[  848.432060]
[  848.434137] Pid: 5107, comm: kworker/u:2 Not tainted 3.2.0-isci+ #8 Intel Corporation S2600CP/S2600CP
[  848.445310] RIP: 0010:[<ffffffff8126a68c>]  [<ffffffff8126a68c>] spin_dump+0x5e/0x8c
[  848.454787] RSP: 0018:ffff8807f868dca0  EFLAGS: 00010002
[  848.461137] RAX: 0000000000000048 RBX: ffff8807fe86a630 RCX: ffffffff817d0be0
[  848.469520] RDX: 0000000000000000 RSI: ffffffff814af1cf RDI: 0000000000000002
[  848.477959] RBP: ffff8807f868dcb0 R08: 00000000ffffffff R09: 000000006b6b6b6b
[  848.486327] R10: 000000000003fb8c R11: ffffffff81a19448 R12: 6b6b6b6b6b6b6b6b
[  848.494699] R13: ffff8808027dc520 R14: 0000000000000000 R15: 000000000000001e
[  848.503067] FS:  0000000000000000(0000) GS:ffff88083fd00000(0000) knlGS:0000000000000000
[  848.512899] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[  848.519710] CR2: 00007ff77d001000 CR3: 00000007f7a5d000 CR4: 00000000000406e0
[  848.528072] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  848.536446] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[  848.544831] Process kworker/u:2 (pid: 5107, threadinfo ffff8807f868c000, task ffff8807ff348000)
[  848.555327] Stack:
[  848.557959]  ffff8807fe86a630 ffff8807fe86a630 ffff8807f868dcd0 ffffffff8126a6e0
[  848.567072]  ffffffff817c142f ffff8807fe86a630 ffff8807f868dcf0 ffffffff8126a703
[  848.576190]  ffff8808027dc520 0000000000000286 ffff8807f868dd10 ffffffff814af1bb
[  848.585281] Call Trace:
[  848.588409]  [<ffffffff8126a6e0>] spin_bug+0x26/0x28
[  848.594357]  [<ffffffff8126a703>] do_raw_spin_unlock+0x21/0x88
[  848.601283]  [<ffffffff814af1bb>] _raw_spin_unlock_irqrestore+0x2c/0x65
[  848.609089]  [<ffffffffa001c103>] ata_scsi_port_error_handler+0x548/0x557 [libata]
[  848.618331]  [<ffffffff81061813>] ? async_schedule+0x17/0x17
[  848.625060]  [<ffffffffa004f30f>] async_sas_ata_eh+0x45/0x69 [libsas]
[  848.632655]  [<ffffffff810618aa>] async_run_entry_fn+0x97/0x125
[  848.639670]  [<ffffffff81057439>] process_one_work+0x207/0x38d
[  848.646577]  [<ffffffff8105738c>] ? process_one_work+0x15a/0x38d
[  848.653681]  [<ffffffff810576f7>] worker_thread+0x138/0x21c
[  848.660305]  [<ffffffff810575bf>] ? process_one_work+0x38d/0x38d
[  848.667493]  [<ffffffff8105b098>] kthread+0x9d/0xa5
[  848.673382]  [<ffffffff8106e1bd>] ? trace_hardirqs_on_caller+0x12f/0x166
[  848.681304]  [<ffffffff814b7704>] kernel_thread_helper+0x4/0x10
[  848.688324]  [<ffffffff814af534>] ? retint_restore_args+0x13/0x13
[  848.695530]  [<ffffffff8105affb>] ? __init_kthread_worker+0x5b/0x5b
[  848.702929]  [<ffffffff814b7700>] ? gs_change+0x13/0x13
[  848.709155] Code: 00 00 48 8d 88 38 04 00 00 44 8b 80 84 02 00 00 31 c0 e8 cf 1b 24 00 41 83 c8 ff 44 8b 4b 08 48 c7 c1 e0 0b 7d 81 4d 85 e4 74 10 <45> 8b 84 24 84 02 00 00 49 8d 8c 24 38 04 00 00 8b 53 04 48 89
[  848.732467] RIP  [<ffffffff8126a68c>] spin_dump+0x5e/0x8c
[  848.738905]  RSP <ffff8807f868dca0>
[  848.743743] ---[ end trace 143161646eee8caa ]---

...so arrange for the ata_port to have the same end of life as the domain
device.

Reported-by: Marcin Tomczak <marcin.tomczak@intel.com>
Acked-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-29 15:22:25 -06:00
Dan Williams
7d05919aad [SCSI] libsas: mark all domain devices gone if root port disappears
If the top level expander is hot removed, mark all child devices as gone
before unregistration to short circuit futile recovery.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-29 15:20:55 -06:00
Dan Williams
45c73b6519 [SCSI] libsas: pre-clean commands that won the eh vs completion race
When scrolling forward through the eh list (in a clear_q scenario) it is
possible to encounter commands that won the completion vs eh race.  Rather
than sprinkle more "if (!task)" throughout the handler just make a pass
through the list and delete the race winners before handling the rest.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-29 15:20:01 -06:00