Commit graph

1091 commits

Author SHA1 Message Date
Linus Torvalds
7a8e9c8088 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 patches from Martin Schwidefsky:
 "A couple of bug fixes, a debug change for qdio, an update for the
  default config, and one small extension.

  The watchdog module based on diagnose 0x288 is converted to the
  watchdog API and it now works under LPAR as well"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/ccwgroup: use ccwgroup_ungroup wrapper
  s390/ccwgroup: fix an uninitialized return code
  s390/ccwgroup: obtain extra reference for asynchronous processing
  qdio: Keep device-specific dbf entries
  s390/compat: correct ucontext layout for high gprs
  s390/cio: set device name as early as possible
  s390: update default configuration
  s390: avoid format strings leaking into names
  s390/airq: silence lockdep warning
  s390/watchdog: add support for LPAR operation (diag288)
  s390/watchdog: use watchdog API
  s390/sclp_vt220: Enable ASCII console per default
  s390/qdio: replace shift loop by ilog2
  s390/cio: silence lockdep warning
  s390/uaccess: always load the kernel ASCE after task switch
  s390/ap_bus: Make modules parameters visible in sysfs
2014-06-21 06:47:01 -10:00
David Cohen
87a1ef8058 watchdog: add Intel MID watchdog driver support
Add initial Intel MID watchdog driver support.

This driver is an initial implementation of generic Intel MID watchdog
driver. Currently it supports Intel Merrifield platform.

Signed-off-by: Eric Ernst <eric.ernst@intel.com>
Signed-off-by: David Cohen <david.a.cohen@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-06-10 21:48:16 +02:00
Viresh Kumar
938626d96a watchdog: sp805: Set watchdog_device->timeout from ->set_timeout()
Implementation of ->set_timeout() is supposed to set 'timeout' field of 'struct
watchdog_device' passed to it. sp805 was rather setting this in a local
variable. Fix it.

Reported-by: Arun Ramamurthy <arun.ramamurthy@broadcom.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Cc: <stable@vger.kernel.org> # 2.6.36+
2014-06-10 21:47:47 +02:00
Tang Yuantian
d2deebabae booke/watchdog: refine and clean up the codes
Basically, this patch does the following:
1. Move the codes of parsing boot parameters from setup-common.c
   to driver. In this way, code reader can know directly that
   there are boot parameters that can change the timeout.
2. Make boot parameter 'booke_wdt_period' effective.
   currently, when driver is loaded, default timeout is always
   being used in stead of booke_wdt_period.
3. Wrap up the watchdog timeout in device struct and clean up
   unnecessary codes.

Signed-off-by: Tang Yuantian <yuantian.tang@freescale.com>
Acked-by: Scott Wood <scottwood@freescale.com>
Reviewed-by: Li Yang <leoli@freescale.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-06-10 21:47:26 +02:00
Arnd Bergmann
ec2e32ca66 watchdog: iop_wdt only builds for mach-iop13xx
All three iop variants we support in Linux (iop32x, iop33x and
iop13xx) seem to have support for the watchdog hardware, but this
driver fails to build for the first two of these because it
uses the IOP13XX_WDTCR_IB_RESET macro that is only defined for
iop13xx.

This clarifies the dependency in Kconfig to avoid randconfig
build errors. It is unlikely that anyone will ever miss support
for this driver on the ancient iop3xx platforms, so we don't
need to bother trying to fix it properly.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Cc: linux-watchdog@vger.kernel.org
2014-06-10 21:46:57 +02:00
Guenter Roeck
7285fae934 watchdog: Remove drivers for W83697HF and W83697UG
Since both chips are now supported by the w83627hf watchdog driver,
the chip specific drivers are no longer needed and can be removed.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-06-10 21:46:26 +02:00
Guenter Roeck
be281588d0 watchdog: w83627hf_wdt: Add early_disable module parameter
Add early_disable module parameter to match functionality previously
available in the w83697hf_wdt driver.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-06-10 21:46:07 +02:00
Ezequiel Garcia
b483642fc3 watchdog: orion: Add Armada 375/380 SoC support
This commit adds support for the Armada 375 and Armada 380 SoCs.

This SoC variant has a second RSTOUT register, in addition to the already
existent, which is shared with the system-controller. To handle this RSTOUT,
we introduce a new MMIO register 'rstout_mask' to be required on
'armada-{375,380}-watchdog' new compatible string.

Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-06-10 21:44:41 +02:00
Ezequiel Garcia
1b0ea574ac watchdog: orion: Introduce per-SoC enabled() function
In order to support other SoCs, it's needed to have a different enabled()
implementation for each SoC. This commit adds no functionality, and it
consists of preparation work.

Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-06-10 21:44:31 +02:00
Ezequiel Garcia
ebf5cf7628 watchdog: orion: Introduce per-SoC stop() function
In order to support other SoCs, it's needed to have a different stop()
implementation for each SoC. This commit adds no functionality, and it
consists of preparation work.

Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-06-10 21:44:24 +02:00
Ezequiel Garcia
eba985e20c watchdog: orion: Remove unneeded atomic access
The RSTOUT register on the Armada 370 SoC variant is a dedicated register
(not shared across orthogonal subsystems) and so it's not needed to write
it atomically.

Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-06-10 21:44:20 +02:00
Ezequiel Garcia
92d4fc1a1f watchdog: orion: Introduce a SoC-specific RSTOUT mapping
Separate the RSTOUT register mapping for the different compatible strings
supported by the driver. This allows to use devm_ioremap on SoC variants that
share the RSTOUT register, and devm_ioremap_resource (which requests the MMIO
region) on SoCs that have a dedicated RSTOUT register.

Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-06-10 21:44:06 +02:00
Ezequiel Garcia
aaaac9ec79 watchdog: orion: Move the register ioremap'ing to its own function
Follow-up patches will extend the registers ioremap and request
to handle SoC-specific quirks on the RSTOUT register. Therefore,
in order to keep the code readable, this commit introduces a special
function for this.

Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-06-10 21:43:54 +02:00
Jingoo Han
9ebf1855db watchdog: xilinx: Make of_device_id array const
Make of_device_id array const, because all OF functions
handle it as const.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Reviewed-by: Michal Simek <monstr@monstr.eu>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-06-10 21:43:21 +02:00
Anatolij Gustschin
faad5de0b1 watchdog: imx2_wdt: convert to watchdog core api
Convert the imx2_wdt driver to the new watchdog core api.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Cc: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-06-10 21:42:59 +02:00
Xiubo Li
a797700329 watchdog: imx2_wdt: convert to use regmap API.
This watchdog driver will be working on IMX2+, Vybrid, LS1, LS2+
platforms, and will be in different endianness mode in those SoCs:

SoCs         CPU endian mode      WDT endian mode
------------------------------------------------
IMX2+            LE                    LE
Vybird           LE                    LE
LS1              LE                    BE
LS2              LE                    LE

Other possible SoCs:
SoCs         CPU endian mode      WDT endian mode
------------------------------------------------
Soc1             BE                    BE
Soc2             BE                    LE

And also the watchdog's registers will be 32-bits for some versions,
and though it is 16-bits in IMX2+, Vybird and LS+.

Using the regmap APIs, could be more easy to support different
endianness and also more easy to support 32-bits version...

Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-06-10 21:42:46 +02:00
Xiubo Li
30cb042a84 watchdog: imx2_wdt: Sort the header files alphabetically
Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-06-10 21:42:14 +02:00
Gabor Juhos
b4e62d9467 watchdog: ath79_wdt: switch to clk_prepare/clk_disable
Replace clk_enable() and clk_disable() calls with
clk_prepare_enable() and clk_disable_unprepare()
to get ready for the migration to the common clock
framework.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-06-10 21:41:36 +02:00
Gabor Juhos
23afeb613e watchdog: ath79_wdt: avoid spurious restarts on AR934x
On some AR934x based systems, where the frequency of
the AHB bus is relatively high, the built-in watchdog
causes a spurious restart when it gets enabled.

The possible cause of these restarts is that the timeout
value written into the TIMER register does not reaches
the hardware in time.

Add an explicit delay into the ath79_wdt_enable function
to avoid the spurious restarts.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Cc: <stable@vger.kernel.org>
2014-06-10 21:40:48 +02:00
Alexander Shiyan
ff4e0ae5fe watchdog: shwdt: Remove unused platform_set_drvdata()
This patch removes platform_set_drvdata() which is not used in
the driver.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-06-10 21:40:16 +02:00
gundberg
a9e0436b30 watchdog: kempld-wdt: Use the correct value when configuring the prescaler with the watchdog
Use the prescaler index, rather than its value, to configure the watchdog.
This will prevent a mismatch with the prescaler used to calculate the cycles.

Signed-off-by: Per Gundberg <per.gundberg@icomera.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Michael Brunner <michael.brunner@kontron.com>
Tested-by: Michael Brunner <michael.brunner@kontron.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Cc: stable <stable@vger.kernel.org>
2014-06-10 21:39:48 +02:00
Emilio López
51ee34ab58 watchdog: sunxi: Fix compilation with C=2
When compiling sunxi_defconfig while using C=2, the following error
causes the compilation to fail:

    drivers/watchdog/sunxi_wdt.c:60:15: error: constant 0b0001 is not a valid number

Fix it by using hex notation instead of the non-standard binary one

Signed-off-by: Emilio Lopez <emilio@elopez.com.ar>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-06-10 21:39:26 +02:00
Julia Lawall
3813ff8b38 watchdog: via_wdt: replace del_timer by del_timer_sync
Use del_timer_sync to ensure that the timer is stopped on all CPUs before
the driver exits.

This change was suggested by Thomas Gleixner.

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@r@
identifier i,t,ex;
@@
struct t i = { .remove = ex, };

@@
identifier r.ex;
@@
ex(...) {
  <...
- del_timer
+ del_timer_sync
    (...)
  ...>
}
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-06-10 21:38:25 +02:00
Jean Delvare
1e8c8a5b48 watchdog: Fix SBC8360 dependencies
According to its Kconfig help text, the sbc8360 watchdog driver is
only used on the Axiomtek SBC8360 single-board computer. This piece of
hardware is 32-bit x86 so the driver is useless beyond X86_32.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-06-10 21:37:14 +02:00
Philipp Hachtmann
646f919e93 s390/watchdog: add support for LPAR operation (diag288)
Add the LPAR variant of the diag 288 watchdog to the driver.
The only available action on timeout for LPAR is a PSW restart.

Signed-off-by: Philipp Hachtmann <phacht@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-06-10 10:48:29 +02:00
Philipp Hachtmann
f7a94db4e9 s390/watchdog: use watchdog API
Converted the vmwatchdog driver to use the kernel's watchdog API.

Signed-off-by: Philipp Hachtmann <phacht@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-06-10 10:48:29 +02:00
Linus Torvalds
467a9e1633 CPU hotplug notifiers registration fixes for 3.15-rc1
The purpose of this single series of commits from Srivatsa S Bhat (with
 a small piece from Gautham R Shenoy) touching multiple subsystems that use
 CPU hotplug notifiers is to provide a way to register them that will not
 lead to deadlocks with CPU online/offline operations as described in the
 changelog of commit 93ae4f978c (CPU hotplug: Provide lockless versions
 of callback registration functions).
 
 The first three commits in the series introduce the API and document it
 and the rest simply goes through the users of CPU hotplug notifiers and
 converts them to using the new method.
 
 /
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJTQow2AAoJEILEb/54YlRxW4QQAJlYRDUzwFJzJzYhltQYuVR+
 4D74XMtvXgoJfg3cwdSWvMKKpJZnA9BVN0f7Hcx9wYmgdexYUuHeZJmMNyc3S2+g
 KjKBIsugvgmZhHbbLd6TJ6GBbhGT5JLt9VmSfL9zIkveInU1YHFUUqL/mxdHm4J0
 BSGKjk2rN3waRJgmY+xfliFLtQjDKFwJpMuvrgtoUyfas3f4sIV43UNbqdvA/weJ
 rzedxXOlKH/id4b56lj/4iIzcoL3mwvJJ7r6n0CEMsKv87z09kqR0O+69Tsq/cgs
 j17CsvoJOmZGk3QTeKVMQWBsvk6aPoDu3zK83gLbQMt+qjOpSTbJLz/3HZw4/TrW
 ss4nuZne1DLMGS+6hoxYbTP+6Ni//Kn+l/LrHc5jb7m1X3lMO4W2aV3IROtIE1rv
 lEP1IG01NU4u9YwkVj1dyhrkSp8tLPul4SrUK8W+oNweOC5crjJV7vJbIPJgmYiM
 IZN55wln0yVRtR4TX+rmvN0PixsInE8MeaVCmReApyF9pdzul/StxlBze5BKLSJD
 cqo1kNPpsmdxoDucqUpQ/gSvy+IOl2qnlisB5PpV93sk7De6TFDYrGHxjYIW7jMf
 StXwdCDDQhzd2Q8Kfpp895A1dbIl8rKtwA6bTU2eX+BfMVFzuMdT44cvosx1+UdQ
 sWl//rg76nb13dFjvF+q
 =SW7Q
 -----END PGP SIGNATURE-----

Merge tag 'cpu-hotplug-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull CPU hotplug notifiers registration fixes from Rafael Wysocki:
 "The purpose of this single series of commits from Srivatsa S Bhat
  (with a small piece from Gautham R Shenoy) touching multiple
  subsystems that use CPU hotplug notifiers is to provide a way to
  register them that will not lead to deadlocks with CPU online/offline
  operations as described in the changelog of commit 93ae4f978c ("CPU
  hotplug: Provide lockless versions of callback registration
  functions").

  The first three commits in the series introduce the API and document
  it and the rest simply goes through the users of CPU hotplug notifiers
  and converts them to using the new method"

* tag 'cpu-hotplug-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (52 commits)
  net/iucv/iucv.c: Fix CPU hotplug callback registration
  net/core/flow.c: Fix CPU hotplug callback registration
  mm, zswap: Fix CPU hotplug callback registration
  mm, vmstat: Fix CPU hotplug callback registration
  profile: Fix CPU hotplug callback registration
  trace, ring-buffer: Fix CPU hotplug callback registration
  xen, balloon: Fix CPU hotplug callback registration
  hwmon, via-cputemp: Fix CPU hotplug callback registration
  hwmon, coretemp: Fix CPU hotplug callback registration
  thermal, x86-pkg-temp: Fix CPU hotplug callback registration
  octeon, watchdog: Fix CPU hotplug callback registration
  oprofile, nmi-timer: Fix CPU hotplug callback registration
  intel-idle: Fix CPU hotplug callback registration
  clocksource, dummy-timer: Fix CPU hotplug callback registration
  drivers/base/topology.c: Fix CPU hotplug callback registration
  acpi-cpufreq: Fix CPU hotplug callback registration
  zsmalloc: Fix CPU hotplug callback registration
  scsi, fcoe: Fix CPU hotplug callback registration
  scsi, bnx2fc: Fix CPU hotplug callback registration
  scsi, bnx2i: Fix CPU hotplug callback registration
  ...
2014-04-07 14:55:46 -07:00
Linus Torvalds
e5744abb2f == Changes to existing drivers ==
- Use of managed resources - omap, twl4030, ti_am335x_tscadc
    - Advanced error handling - omap
    - Rework clk management - omap
    - Device Tree (re-)work - tc3589x, pm8921, da9055, sec
    - IRC management overhaul and !BROKEN - pm8921
    - Convert to regmap - ssbi, pm8921
    - Use simple power-management ops - ucb1x00
    - Include file clean-up - adp5520, cs5535, janz, lpc_ich,
       - lpc_sch, max14577, mcp-sa11x0, pcf50633-adc, rc5t583,
       	rdc321x-southbridge, retu, smsc-ece1099, ti-ssp, ti_am335x_tscadc,
 	tps65912, vexpress-config, wm8350, ywm8350
    - Various bug fixes across the subsystem
       - NULL/invalid pointer dereference prevention
       - Resource leak mitigation,
       - Variable used initialised
       - Staticise various containers
       - Enforce return value checks
 
  == New drivers/supported devices ==
    - Add support for s2mps14 and s2mpa01 to sec
    - Add support for da9063 (v5) to da9063
    - Add support for atom-c2000 to gpio-ich
    - Add support for come-{mbt10,cbt6,chl6} to kempld
    - Add support for da9053 to da9052
    - Add support for itco-wdt (v3) and baytrail to lpc_ich
    - Add new drivers for tps65218, rtsx_usb, bcm590xx
 
  == (Re-)moved drivers ==
    - twl4030 ==> drivers/iio
    - ti-ssp  ==> /dev/null
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJTQmHbAAoJEFGvii+H/HdhXgAQAI6dNLb3AfNol49pNh5nEcrt
 sixQwu56xe64xozcMq41oXcbIe6NOvd/Sgf57fowCqrNyXd3k2sp6/KzA1yM8yfc
 2Xfm2fzzMoyH3lEopepT0zKMEyeOKxCNJWInXjRDmR6EN8szV/gAvwEptXnXKq8n
 sANQCBr2A1sDAlxu5onDI6SGEibCZgSsW+EElPyNKjXyIXdATv+ZLSuNCapt2Zg2
 H/KM+CY2hlcl6quWwjEUtPF4Ux0hIv3ePkwDKQicXMgndxL3+aL5L66UHsIovgxW
 o9H2aA6cfOQJuAXAZUvHlsNlefFW5qpFFR8kXiW87Say3+7nijoe5DhH/RBSZN+i
 O0rbxWVa1rW9eYmHuKAPNMR8Lp4FN9OvBo/Yv3UfmMV661vLVLOvTwJI9GZg7v8o
 UPMDhYNgEnRNrWqf7Wkj9ywgvGaO8qggm7gpE2cFD8DGDR7aZQ9goRKpaVSjTNmW
 4staek1u4g7YQ9s2UXxQ0JFc7esMbUbXxv5Bmk+4JPiI3P4gDMTg7jhh5iKDcEs5
 BVUIfdYKF9LInfYT3o9Uvo6TbYeAfwwzOdMFDWa5BjGOCLD9ttOEGtqMD/bkANbn
 YsaD6xKEL+su37CocSPnekgU+IS0uLb15jpa06CmoaALPGAZcRffKMygSHtlyGtR
 pNazlO93tu9JXQcL5B+A
 =p4SP
 -----END PGP SIGNATURE-----

Merge tag 'mfd-for-linus-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones:
 "Changes to existing drivers:
   - Use of managed resources - omap, twl4030, ti_am335x_tscadc
   - Advanced error handling - omap
   - Rework clk management - omap
   - Device Tree (re-)work - tc3589x, pm8921, da9055, sec
   - IRC management overhaul and !BROKEN - pm8921
   - Convert to regmap - ssbi, pm8921
   - Use simple power-management ops - ucb1x00
   - Include file clean-up - adp5520, cs5535, janz, lpc_ich,
      - lpc_sch, max14577, mcp-sa11x0, pcf50633-adc, rc5t583,
      	rdc321x-southbridge, retu, smsc-ece1099, ti-ssp, ti_am335x_tscadc,
	tps65912, vexpress-config, wm8350, ywm8350
   - Various bug fixes across the subsystem
      - NULL/invalid pointer dereference prevention
      - Resource leak mitigation,
      - Variable used initialised
      - Staticise various containers
      - Enforce return value checks

  New drivers/supported devices:
   - Add support for s2mps14 and s2mpa01 to sec
   - Add support for da9063 (v5) to da9063
   - Add support for atom-c2000 to gpio-ich
   - Add support for come-{mbt10,cbt6,chl6} to kempld
   - Add support for da9053 to da9052
   - Add support for itco-wdt (v3) and baytrail to lpc_ich
   - Add new drivers for tps65218, rtsx_usb, bcm590xx

  (Re-)moved drivers:
   - twl4030 ==> drivers/iio
   - ti-ssp  ==> /dev/null"

* tag 'mfd-for-linus-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (103 commits)
  mfd: wm5110: Correct default for HEADPHONE_DETECT_1
  mfd: arizona: Correct small errors in the DT binding documentation
  mfd: arizona: Mark DSP clocking register as volatile
  mfd: devicetree: bindings: Add pm8xxx RTC description
  mfd: kempld-core: Fix potential hang-up during boot
  mfd: sec-core: Fix uninitialized 'regmap_rtc' on S2MPA01
  mfd: tps65910: Fix regmap_irq_chip_data leak on mfd_add_devices fail
  mfd: tps65910: Fix possible invalid pointer dereference on regmap_add_irq_chip fail
  mfd: sec-core: Fix I2C dummy device resource leak on probe failure
  mfd: sec-core: Add of_compatible strings for clock MFD cells
  mfd: Remove obsolete ti-ssp driver
  Documentation: mfd: s2mps11: Describe S5M8767 and S2MPS14 clocks
  mfd: bcm590xx: Fix type argument for module device table
  mfd: lpc_ich: Add support for Intel Bay Trail SoC
  mfd: lpc_ich: Add support for NM10 GPIO
  mfd: lpc_ich: Change Avoton to iTCO v3
  watchdog: iTCO_wdt: Add support for v3 silicon
  mfd: lpc_ich: Add support for iTCO v3
  mfd: lpc_ich: Remove lpc_ich_cfg struct use
  mfd: lpc_ich: Only configure watchdog or GPIO when present
  ...
2014-04-07 10:24:18 -07:00
Linus Torvalds
cbda94e039 ARM: SoC: driver changes
These changes are mostly for ARM specific device drivers that either
 don't have an upstream maintainer, or that had the maintainer ask
 us to pick up the changes to avoid conflicts. A large chunk of this
 are clock drivers (bcm281xx, exynos, versatile, shmobile), aside from
 that, reset controllers for STi as well as a large rework of the
 Marvell Orion/EBU watchdog driver are notable.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIVAwUAUz/1+GCrR//JCVInAQJmfg/9GyqHatDjjUPUBjUQRIEtKgGdmQwdbDqF
 x+OrS/q5B5zYbpIWkbkt1IUYJfU+89Z5ev9jxI4rV824Nu9Y92mHPDnv+N/ptkIh
 q2OVP3bQDpWs3aEVV2B1HBNcWrNUuwco9BJu05eegEePii/cto0/wKwWIgUmrmjy
 xOLthsnp2YmeplGs7ctC6Dz8XbmELebpawejTGylARXei/SwmzB/YYDgJbYjRL2I
 WSCVa8Vo+MZaGC/yxdKVTtvsKVQenxGoMO3ojikJeRdvuVRJds48Cw+UBdzWYNeJ
 3Ssvbdx6Xltf9jy/7H0btOUgxPetZuUV+2XpbWfGu0Zr9FcGDv3q9hrxA+UYKnkY
 GIGU0otSsmpHnX5Ms3E2xnHiV/fihxA3qohqts5kYRBDr5uc+IpW6SbDymQliCGG
 OO4XmIVM3pmsqAqP3Zuseemt9CeSW2yC0XlfXkzjO74yY39c+WLBbtGI40Z5W6i0
 mM1C8RD3QSNijYCEC8eqz06BQfRImsPs+jllsnJTZaHfbOsib718uvandjfG26lN
 616YMcqq0Sp51HIQ4qW7f2dQr7vOyNqbukdkrwF5JgkY/nVki5kdciRg/yeipRy6
 Ey80a+OTq0GQljM0F2dcH/A1eHH9KsuI1L6NdSMJsl0h6guIBORPTwTw3qJ13OkR
 wpJyM+Gm+Fk=
 =u/FI
 -----END PGP SIGNATURE-----

Merge tag 'drivers-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver changes from Arnd Bergmann:
 "These changes are mostly for ARM specific device drivers that either
  don't have an upstream maintainer, or that had the maintainer ask us
  to pick up the changes to avoid conflicts.

  A large chunk of this are clock drivers (bcm281xx, exynos, versatile,
  shmobile), aside from that, reset controllers for STi as well as a
  large rework of the Marvell Orion/EBU watchdog driver are notable"

* tag 'drivers-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (99 commits)
  Revert "dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac."
  Revert "net: stmmac: Add SOCFPGA glue driver"
  ARM: shmobile: r8a7791: Fix SCIFA3-5 clocks
  ARM: STi: Add reset controller support to mach-sti Kconfig
  drivers: reset: stih416: add softreset controller
  drivers: reset: stih415: add softreset controller
  drivers: reset: Reset controller driver for STiH416
  drivers: reset: Reset controller driver for STiH415
  drivers: reset: STi SoC system configuration reset controller support
  dts: socfpga: Add sysmgr node so the gmac can use to reference
  dts: socfpga: Add support for SD/MMC on the SOCFPGA platform
  reset: Add optional resets and stubs
  ARM: shmobile: r7s72100: fix bus clock calculation
  Power: Reset: Generalize qnap-poweroff to work on Synology devices.
  dts: socfpga: Update clock entry to support multiple parents
  ARM: socfpga: Update socfpga_defconfig
  dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac.
  net: stmmac: Add SOCFPGA glue driver
  watchdog: orion_wdt: Use %pa to print 'phys_addr_t'
  drivers: cci: Export CCI PMU revision
  ...
2014-04-05 15:37:40 -07:00
Linus Torvalds
235c7b9feb Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
Pull main powerpc updates from Ben Herrenschmidt:
 "This time around, the powerpc merges are going to be a little bit more
  complicated than usual.

  This is the main pull request with most of the work for this merge
  window.  I will describe it a bit more further down.

  There is some additional cpuidle driver work, however I haven't
  included it in this tree as it depends on some work in tip/timer-core
  which Thomas accidentally forgot to put in a topic branch.  Since I
  didn't want to carry all of that tip timer stuff in powerpc -next, I
  setup a separate branch on top of Thomas tree with just that cpuidle
  driver in it, and Stephen has been carrying that in next separately
  for a while now.  I'll send a separate pull request for it.

  Additionally, two new pieces in this tree add users for a sysfs API
  that Tejun and Greg have been deprecating in drivers-core-next.
  Thankfully Greg reverted the patch that removes the old API so this
  merge can happen cleanly, but once merged, I will send a patch
  adjusting our new code to the new API so that Greg can send you the
  removal patch.

  Now as for the content of this branch, we have a lot of perf work for
  power8 new counters including support for our new "nest" counters
  (also called 24x7) under pHyp (not natively yet).

  We have new functionality when running under the OPAL firmware
  (non-virtualized or KVM host), such as access to the firmware error
  logs and service processor dumps, system parameters and sensors, along
  with a hwmon driver for the latter.

  There's also a bunch of bug fixes accross the board, some LE fixes,
  and a nice set of selftests for validating our various types of copy
  loops.

  On the Freescale side, we see mostly new chip/board revisions, some
  clock updates, better support for machine checks and debug exceptions,
  etc..."

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (70 commits)
  powerpc/book3s: Fix CFAR clobbering issue in machine check handler.
  powerpc/compat: 32-bit little endian machine name is ppcle, not ppc
  powerpc/le: Big endian arguments for ppc_rtas()
  powerpc: Use default set of netfilter modules (CONFIG_NETFILTER_ADVANCED=n)
  powerpc/defconfigs: Enable THP in pseries defconfig
  powerpc/mm: Make sure a local_irq_disable prevent a parallel THP split
  powerpc: Rate-limit users spamming kernel log buffer
  powerpc/perf: Fix handling of L3 events with bank == 1
  powerpc/perf/hv_{gpci, 24x7}: Add documentation of device attributes
  powerpc/perf: Add kconfig option for hypervisor provided counters
  powerpc/perf: Add support for the hv 24x7 interface
  powerpc/perf: Add support for the hv gpci (get performance counter info) interface
  powerpc/perf: Add macros for defining event fields & formats
  powerpc/perf: Add a shared interface to get gpci version and capabilities
  powerpc/perf: Add 24x7 interface headers
  powerpc/perf: Add hv_gpci interface header
  powerpc: Add hvcalls for 24x7 and gpci (Get Performance Counter Info)
  sysfs: create bin_attributes under the requested group
  powerpc/perf: Enable BHRB access for EBB events
  powerpc/perf: Add BHRB constraint and IFM MMCRA handling for EBB
  ...
2014-04-02 13:42:59 -07:00
Jean Delvare
6d956e422b watchdog: Fix Elan SC520 dependencies
Anyone using a system based on an AMD Elan SC520 processor would be
building a dedicated kernel for it, so we can make the sc520_wdt
driver depend on MELAN. SC520_CPUFREQ already depends on MELAN so it
makes things more consistent. It also makes kernel configuration for
every other x86 user easier.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31 13:36:12 +02:00
Jean Delvare
996735ffd4 watchdog: ib700wdt: Use platform_driver_probe
Using platform_driver_probe instead of platform_driver_register has
two benefits:
* The driver will fail to load if device probing fails.
* The probe function can be marked __init.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31 13:35:26 +02:00
Jean Delvare
78411be4c7 watchdog: geodewdt: Use platform_driver_probe
Using platform_driver_probe instead of platform_driver_register has
two benefits:
* The driver will fail to load if device probing fails.
* The probe function can be marked __init.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31 13:35:05 +02:00
Jean Delvare
acaaaf62c9 watchdog: advantechwdt: Use platform_driver_probe
Using platform_driver_probe instead of platform_driver_register has
two benefits:
* The driver will fail to load if device probing fails.
* The probe function can be marked __init.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31 13:34:44 +02:00
Jean Delvare
b0e0b4b598 watchdog: acquirewdt: Use platform_driver_probe
Using platform_driver_probe instead of platform_driver_register has
two benefits:
* The driver will fail to load if device probing fails.
* The probe function can be marked __init.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31 13:34:30 +02:00
Jean Delvare
c90789baa8 watchdog: iTCO_wdt: Fix the parent device
The watchdog's parent is iTCO_wdt (the platform device) not lpc_ich
(the PCI device.) Setting the parent right makes it much easier for
the user to figure out which driver/module is handling the watchdog
device node.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31 13:34:13 +02:00
Marc van der Wal
0bcd0b6a47 watchdog: it87_wdt: Work around non-working CIR interrupts
On some hardware platforms, the it87_wdt watchdog resets the machine
despite the watchdog daemon running and writing to /dev/watchdog.

This is due to Consumer IR buffer underrun interrupts being used as
triggers to reset the timer.  On some buggy hardware implementations
such as the iEi AFL-12A-N270 single-board computer, this method does
not work.

However, resetting the timer by writing its original timeout value in
its configuration register over and over again suppresses the unwanted
reboots.

Add a module option (nocir), 0 by default in order not to break existing
setups.  Setting it to 1 enables the workaround.

Fixes bug #42801 <https://bugzilla.kernel.org/show_bug.cgi?id=42801>.
Tested primarily on Linux 3.5.7, applies cleanly on Linux 3.13.5.

Signed-off-by: Marc van der Wal <x0r+kernel@x0r.fr>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31 13:33:55 +02:00
Markus Mayer
5e82ec94ac watchdog: bcm281xx: Fix Kconfig dependency
Use more the applicable ARCH_BCM_MOBILE option instead of ARCH_BCM as
dependency for bcm_kona_wdt.c.

Signed-off-by: Markus Mayer <markus.mayer@linaro.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31 13:33:36 +02:00
Sachin Kamat
01b6af9159 watchdog: s3c2410_wdt: Check return value of clk_prepare_enable
clk_prepare_enable can fail. Check its return value.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31 13:33:16 +02:00
Sachin Kamat
a94dd879e2 watchdog: s3c2410_wdt: Remove unneeded initialization
Initializing clk to NULL as a reset/error condition does not
help as NULL is not an invalid condition w.r.t clk. Remove this
initialization altogether as there is no state retention.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31 13:32:34 +02:00
Maxime Ripard
b0f1d8bec7 watchdog: sunxi: Change compatibles
The Allwinner A10 and A31 compatibles were following a slightly different
compatible patterns than the rest of the SoCs for historical reasons. Change
the compatibles to match the other pattern in the watchdog controller driver
for consistency.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31 13:32:03 +02:00
Sebastian Hesselbarth
0187cca30c watchdog: orion: prepare new Dove DT Kconfig variable
DT-enabled Dove will move over from ARCH_DOVE in mach-dove to MACH_DOVE in
mach-mvebu. As non-DT ARCH_DOVE will stay to rot for a while, add a new
DT-only MACH_DOVE Kconfig.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31 13:31:37 +02:00
Jingoo Han
5f5e19093b watchdog: fix checkpatch warnings and error
Fix the following checkpatch warnings and error:
  WARNING: quoted string split across lines
  WARNING: braces {} are not necessary for single statement blocks
  WARNING: __initdata should be placed after ibmasr_id_table[]
  WARNING: please, no space before tabs
  ERROR: do not initialise statics to 0 or NULL

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31 13:31:06 +02:00
Andrew Chew
c33a15974c watchdog: Add tegra watchdog
Add a driver for the hardware watchdogs in NVIDIA Tegra SoCs (Tegra30 and
later).  This driver will configure one watchdog timer that will reset the
system in the case of a watchdog timeout.

This driver binds to the nvidia,tegra30-timer device node and gets its
register base from there.

Signed-off-by: Andrew Chew <achew@nvidia.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31 13:30:29 +02:00
Michal Simek
8d6a140b5f watchdog: xilinx: Remove no_timeout variable
Remove no_timeout variable and check variables
directly.

Suggested-by: Rob Herring <robherring2@gmail.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31 13:29:31 +02:00
Michal Simek
c9dcf9f2ea watchdog: xilinx: Enable this driver for Zynq
Enable this driver for Zynq.
Move it to architecture independent Kconfig part.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31 13:29:28 +02:00
Michal Simek
75b3c5a827 watchdog: xilinx: Use correct comment indentation
No functional changes.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31 13:29:21 +02:00
Michal Simek
2e79a36847 watchdog: xilinx: Use of_property_read_u32
Use of_property_read_u32 functions to clean probe function.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31 13:29:18 +02:00
Michal Simek
4c7fbbc4a5 watchdog: xilinx: Fix all printk messages
Use dev_ functions for printk messages.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31 13:29:14 +02:00
Michal Simek
9066317178 watchdog: xilinx: Allocate private structure per device
Only one watchdog could be used by this driver.
Create driver private data structure and move there
all variables for one instance.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31 13:29:11 +02:00