After a somewhat quiet 5.17 release, the size of the DT changes
is a bit larger again. There are nine new SoC that get added,
all of them related to existing platforms:
- Airoha (formerly Mediatek/EcoNet) EN7523 networking SoC and EVB
- Mediatek mt6582 tablet platform with the Prestigio PMT5008 3G tablet
- Microchip Lan966 networking SoC and it evaluation board
- Qualcomm Snapdragon 625/632 midrange phone SoCs, with the
LG Nexus 5X and Fairphone FP3 phones
- Renesas RZ/G2LC and RZ/V2L general-purpose embedded SoCs,
along with their evaluation boards
- Samsung Exynos 850 phone SoC and reference board
- Samsung Exynos7885 with the Samsung Galaxy A8 (2018) phone
- Tesla FSD (Fully Self-Driving), an automotive SoC losely derived
from the Samsung Exynos family.
- TI K3/AM62 SoC and reference board
Support for additional functionality in existing dts files is added all
over the place: Samsung, Renesas, Mstar, wpcm450, OMAP, AT91, Allwinner,
i.MX, Tegra, Aspeed, Oxnas, Qualcomm, Mediatek, and Broadcom.
Samsung has a rework for its pinctrl schema that is a bit tricky and
requires driver changes to be included here.
A few more platforms only have smaller cleanups and DT Schema fixes,
this includes SoCFPGA, ux500, ixp4xx, STi, Xilinx Zynq, LG, and Juno.
The new machines are really too many to list, but I'll do it anyway:
Allwinner:
- A20-Marsboard development board
Amlogic
- Amediatek X96-AIR (Amlogic S905X3)
- CYX A95XF3-AIR (Amlogic S905X3)
- Haochuangy H96-Max (Amlogic S905X3)
- Amlogic AQ222 (Amlogic S4)
- OSMC Vero 4K+ (Amlogic S905D)
Arm Juno
- Separate DT depending on SCMI firmware version
Aspeed:
- Quanta S6Q BMC (AST2600)
- ASRock ROMED8HM3 (AST2500)
Broadcom:
- Raspberry Pi Zero 2 W
Marvell MVEBU/Armada:
- Ctera C200 V1 NAS (kirkwood)
- Ctera C200 V2 NAS (armada-370)
Mstar
- DongShanPiOne, a low-end embedded board
- Miyoo Mini handheld game console
NXP i.MX:
- Numerous i.MX8M Mini based boards in even more variations, but
none based on other SoCs this time:
Protonic PRT8MM, emCON-MX8M Mini, Toradex Verdin, and
Gateworks GW7903
Qualcomm:
- Google Herobrine R1 Chromebook platform (Snapdragon 7c Gen 3)
- SHIFT6mq phone (Snapdragon 845)
- Samsung Galaxy Book2 (Snapdragon 850)
- Snapdragon 8 Gen 1 Hardware Development Kit
TI OMAP:
- SanCloud BeagleBone Enhanced WiFi
Rockchip:
- Pine64 PineNote ereader tablet (rk356x)
- Bananapi-R2-Pro (rk356x)
STM32:
- emtrion emSBS-Argon embedded board (stm32mp157c)
-----BEGIN PGP SIGNATURE-----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=v98T
-----END PGP SIGNATURE-----
Merge tag 'arm-dt-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM devicetree updates from Arnd Bergmann:
"After a somewhat quiet 5.17 release, the size of the DT changes is a
bit larger again. There are nine new SoC that get added, all of them
related to existing platforms:
- Airoha (formerly Mediatek/EcoNet) EN7523 networking SoC and EVB
- Mediatek mt6582 tablet platform with the Prestigio PMT5008 3G
tablet
- Microchip Lan966 networking SoC and it evaluation board
- Qualcomm Snapdragon 625/632 midrange phone SoCs, with the LG Nexus
5X and Fairphone FP3 phones
- Renesas RZ/G2LC and RZ/V2L general-purpose embedded SoCs, along
with their evaluation boards
- Samsung Exynos 850 phone SoC and reference board
- Samsung Exynos7885 with the Samsung Galaxy A8 (2018) phone
- Tesla FSD (Fully Self-Driving), an automotive SoC loosely derived
from the Samsung Exynos family.
- TI K3/AM62 SoC and reference board
Support for additional functionality in existing dts files is added
all over the place: Samsung, Renesas, Mstar, wpcm450, OMAP, AT91,
Allwinner, i.MX, Tegra, Aspeed, Oxnas, Qualcomm, Mediatek, and
Broadcom.
Samsung has a rework for its pinctrl schema that is a bit tricky and
requires driver changes to be included here.
A few more platforms only have smaller cleanups and DT Schema fixes,
this includes SoCFPGA, ux500, ixp4xx, STi, Xilinx Zynq, LG, and Juno.
The new machines are really too many to list, but I'll do it anyway:
Allwinner:
- A20-Marsboard development board
Amlogic:
- Amediatek X96-AIR (Amlogic S905X3)
- CYX A95XF3-AIR (Amlogic S905X3)
- Haochuangy H96-Max (Amlogic S905X3)
- Amlogic AQ222 (Amlogic S4)
- OSMC Vero 4K+ (Amlogic S905D)
Arm Juno:
- Separate DT depending on SCMI firmware version
Aspeed:
- Quanta S6Q BMC (AST2600)
- ASRock ROMED8HM3 (AST2500)
Broadcom:
- Raspberry Pi Zero 2 W
Marvell MVEBU/Armada:
- Ctera C200 V1 NAS (kirkwood)
- Ctera C200 V2 NAS (armada-370)
Mstar:
- DongShanPiOne, a low-end embedded board
- Miyoo Mini handheld game console
NXP i.MX:
- Numerous i.MX8M Mini based boards in even more variations, but
none based on other SoCs this time:
Protonic PRT8MM, emCON-MX8M Mini, Toradex Verdin, and
Gateworks GW7903
Qualcomm:
- Google Herobrine R1 Chromebook platform (Snapdragon 7c Gen 3)
- SHIFT6mq phone (Snapdragon 845)
- Samsung Galaxy Book2 (Snapdragon 850)
- Snapdragon 8 Gen 1 Hardware Development Kit
TI OMAP:
- SanCloud BeagleBone Enhanced WiFi
Rockchip:
- Pine64 PineNote ereader tablet (rk356x)
- Bananapi-R2-Pro (rk356x)
STM32:
- emtrion emSBS-Argon embedded board (stm32mp157c)"
* tag 'arm-dt-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (627 commits)
arm64: dts: n5x: drop invalid property and fix edac node name
arm64: dts: fsd: Add the MCT support
arm64: dts: stingray: Fix spi clock name
arm64: dts: ns2: Fix spi clock name
ARM: dts: rockchip: Update regulator name for PX3
ARM: dts: rockchip: Add #clock-cells value for rk805
arm64: dts: rockchip: Add #clock-cells value for rk805
arm64: dts: rockchip: Remove vcc13 and vcc14 for rk808
arm64: dts: rockchip: Fix SDIO regulator supply properties on rk3399-firefly
ARM: dts: at91: sama7g5: Add NAND support
ARM: dts: at91: sama7g5: add eic node
ARM: dts: at91: sama7g5: Remove unused properties in i2c nodes
ARM: dts: at91: sam9x60ek: modify vdd_1v5 regulator to vdd_1v15
arm64: dts: lg: align pl330 node name with dtschema
arm64: dts: lg: add dma-cells to pl330 node
arm64: dts: juno: align pl330 node name with dtschema
arm64: dts: broadcom: Fix sata nodename
arm64: dts: n5x: add sdr edac support
arm64: dts: agilex/stratix10: add clock-names to USB DWC2 node
dt-bindings: usb: dwc2: add disable-over-current
...
for 5.18, please pull the following:
- Arinc defines the switch ports of the RTL8365MB switch on the Asus
RT-AC88U
- Richard provides cache information for the BCM2835/36/37 and BCM2711
SoCs such that tools like "lscpu -C" can report it when supported
- Stefan adds support for the Raspberry Pi Zero 2 W (wireless)
- Matthew defines the MAC address NVMEM cells for the Cisco Meraki
MX64/MX65 devices, he also fixes the LED for these platforms.
- Rafal adds the MAC addres NVMEM cell for the Luxul XWR-3150
-----BEGIN PGP SIGNATURE-----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=ZPvV
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=8qCg
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.18/devicetree' of https://github.com/Broadcom/stblinux into arm/dt
This pull request contains Broadcom ARM-based SoCs Device Tree changes
for 5.18, please pull the following:
- Arinc defines the switch ports of the RTL8365MB switch on the Asus
RT-AC88U
- Richard provides cache information for the BCM2835/36/37 and BCM2711
SoCs such that tools like "lscpu -C" can report it when supported
- Stefan adds support for the Raspberry Pi Zero 2 W (wireless)
- Matthew defines the MAC address NVMEM cells for the Cisco Meraki
MX64/MX65 devices, he also fixes the LED for these platforms.
- Rafal adds the MAC addres NVMEM cell for the Luxul XWR-3150
* tag 'arm-soc/for-5.18/devicetree' of https://github.com/Broadcom/stblinux:
ARM: dts: BCM5301X: Add Ethernet MAC address to Luxul XWR-3150
ARM: dts: NSP: MX6X: correct LED function types
ARM: dts: NSP: MX6X: get mac-address from eeprom
arm64: dts: broadcom: Add reference to RPi Zero 2 W
ARM: dts: Add Raspberry Pi Zero 2 W
dt-bindings: arm: bcm2835: Add Raspberry Pi Zero 2 W
ARM: dts: bcm2835/6: Add the missing L1/L2 cache information
ARM: dts: bcm2711: Add the missing L1/L2 cache information
ARM: dts: bcm2837: Add the missing L1/L2 cache information
ARM: dts: BCM5301X: define RTL8365MB switch on Asus RT-AC88U
Link: https://lore.kernel.org/r/20220307194817.3754107-2-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
EN7523 is an armv8 based silicon used inside broadband access type devices
such as xPON and xDSL. It shares various silicon blocks with MediaTek
silicon such as the MT7622.
Add basic support for Airoha EN7523, enough for booting to console.
The UART is basically 8250-compatible, except for the clock selection.
A clock-frequency value is synthesized to get this to run at 115200 bps.
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Bert Vermeulen <bert@biot.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20220130145116.88406-4-nbd@nbd.name
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
This is a half-width, single-socket Epyc server board with an AST2500
BMC. This device tree is sufficient for basic OpenBMC functionality,
but we'll need to add a few more devices (as driver support becomes
available) before it's fully usable.
Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20220105101719.7093-1-zev@bewilderbeest.net
Signed-off-by: Joel Stanley <joel@jms.id.au>
Highlights:
----------
-MCU:
-Fix W=1 warnings for timers (duplicate unit-address) for F4 and F7 series.
-Enable DMA2D on f469 disco.
- MPU:
-General:
- Add new board support: emSBS-Argon.
- Add dma configuration for all U(S)ART nodes and disable them in board files
when they are not needed in stm32mp15.
- Correct GIC PPI interrupts on stm32mp15 and stm32mp13.
- ST boards:
- Add EXTI support on stm32mp13
- Add DMA, MDMA and DMAmux support to stm32mp13 (iso feature than MP15)
- Update SDMMC1/2 support on stm32mp13: sleep config, update version to v2.2,
update the max frequency to 130 MHz.
- DH boards:
- Enable rproc to control the CM4 and IPCC mailbox to interact with it.
-----BEGIN PGP SIGNATURE-----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=VAh+
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=4fl1
-----END PGP SIGNATURE-----
Merge tag 'stm32-dt-for-v5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/dt
STM32 DT for v5.18, round 1
Highlights:
----------
-MCU:
-Fix W=1 warnings for timers (duplicate unit-address) for F4 and F7 series.
-Enable DMA2D on f469 disco.
- MPU:
-General:
- Add new board support: emSBS-Argon.
- Add dma configuration for all U(S)ART nodes and disable them in board files
when they are not needed in stm32mp15.
- Correct GIC PPI interrupts on stm32mp15 and stm32mp13.
- ST boards:
- Add EXTI support on stm32mp13
- Add DMA, MDMA and DMAmux support to stm32mp13 (iso feature than MP15)
- Update SDMMC1/2 support on stm32mp13: sleep config, update version to v2.2,
update the max frequency to 130 MHz.
- DH boards:
- Enable rproc to control the CM4 and IPCC mailbox to interact with it.
* tag 'stm32-dt-for-v5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (43 commits)
ARM: dts: stm32: Correct masks for GIC PPI interrupts on stm32mp15
ARM: dts: stm32: Correct masks for GIC PPI interrupts on stm32mp13
ARM: dts: stm32: remove timer5 duplicate unit-address on stm32f7 series
ARM: dts: stm32: remove some timer duplicate unit-address on stm32f7 series
ARM: dts: stm32: Enable EXTI on stm32mp13
ARM: dts: stm32: keep uart nodes behavior on stm32mp15xx-dhcor-avenger96
ARM: dts: stm32: keep uart4 behavior on stm32mp15xx-dhcom-som
ARM: dts: stm32: keep uart nodes behavior on stm32mp15xx-dhcom-picoitx
ARM: dts: stm32: keep uart nodes behavior on stm32mp15xx-dhcom-pdk2
ARM: dts: stm32: keep uart nodes behavior on stm32mp15xx-dhcom-drc02
ARM: dts: stm32: keep uart4 behavior on stm32mp157c-odyssey
ARM: dts: stm32: keep uart4 behavior on stm32mp157c-lxa-mc1
ARM: dts: stm32: keep uart nodes behavior on stm32mp157a-stinger96
ARM: dts: stm32: keep uart nodes behavior on stm32mp1-microdev2.0
ARM: dts: stm32: keep uart nodes behavior on stm32mp1-microdev2.0-of7
ARM: dts: stm32: keep uart4 behavior on stm32mp157a-iot-box
ARM: dts: stm32: keep uart4 behavior on icore-stm32mp1-edimm2.2
ARM: dts: stm32: keep uart4 behavior on icore-stm32mp1-ctouch2
ARM: dts: stm32: keep uart4 and uart7 behavior on stm32mp15xx-dkx
ARM: dts: stm32: keep uart4 behavior on stm32mp157c-ed1
...
Link: https://lore.kernel.org/r/893924a9-bcc4-9fa9-4f8e-7f56e77f6854@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- lan966x basic DT and associated evaluation board pcb8291 (2-ports)
- documentation for an upcoming Kontron switch board featuring a LAN9668
- one fix for an old bug we have with PMECC on sama5d2 in some corner
cases
- sama7g5 and its EK: crypto, CAN and DVFS operating points
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ5TRCVIBiyi/S+BG4fOrpwrNPNDAUCYhi3WQAKCRAfOrpwrNPN
DOTGAP9y9/HV8EXrGhm8ZvH0ScfIkf3cPFyoFKtcN4EFNKb12QD/aSjSW17XEwTt
L+RYm2x2lha8eVUteyRpZXZqmK8buwg=
=3qii
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=+JfK
-----END PGP SIGNATURE-----
Merge tag 'at91-dt-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/dt
AT91 & LAN966 DT #1 for 5.18:
- lan966x basic DT and associated evaluation board pcb8291 (2-ports)
- documentation for an upcoming Kontron switch board featuring a LAN9668
- one fix for an old bug we have with PMECC on sama5d2 in some corner
cases
- sama7g5 and its EK: crypto, CAN and DVFS operating points
* tag 'at91-dt-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: at91: sama7g5: add opps
ARM: dts: at91: sama7g5ek: set regulator voltages for standby state
ARM: dts: at91: fix low limit for CPU regulator
ARM: dts: at91: sama7g5: Enable can0 and can1 support in sama7g5-ek
ARM: dts: at91: sama7g5: Add can controllers of sama7g5
ARM: dts: at91: sama7g5: Add crypto nodes
ARM: dts: at91: Use the generic "crypto" node name for the crypto IPs
ARM: dts: at91: remove status = "okay" from soc specific dtsi
ARM: dts: at91: sama5d2: Fix PMERRLOC resource size
dt-bindings: arm: at91: add Kontron's new KSwitches
ARM: dts: add DT for lan966 SoC and 2-port board pcb8291
Link: https://lore.kernel.org/r/20220225110735.18080-1-nicolas.ferre@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* 'mstar-dt-next' of https://github.com/linux-chenxing/linux:
ARM: mstar: Extend opp_table for infinity2m
ARM: mstar: Add OPP table for infinity3
ARM: mstar: Add OPP table for infinity
ARM: mstar: Link cpupll to second core
ARM: mstar: Link cpupll to cpu
ARM: mstar: Add cpupll to base dtsi
dt-bindings: clk: mstar msc313 cpupll binding description
ARM: dts: mstar: Add board for 100ask DongShanPiOne
dt-bindings: arm: mstar: Add compatible for 100ask DongShanPiOne
dt-bindings: vendor-prefixes: Add prefix for 100ask
ARM: dts: mstar: Add a dts for Miyoo Mini
dt-bindings: arm: mstar: Add compatible for Miyoo Mini
dt-bindings: vendor-prefixes: Add prefix for Miyoo
ARM: dts: mstar: Add the Wireless Tag IDO-SBC2D06-V1B-22W
dt-bindings: add vendor prefix for Wireless Tag
ARM: dts: mstar: Set gpio compatible for ssd20xd
Link: https://lore.kernel.org/r/20220216193131.59794-1-romain.perier@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Fix up the WG302 to support the v1 version (also tested)
- Fix up the syscon size
- Drop the alias for UART1 in GW7001
-----BEGIN PGP SIGNATURE-----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=ydjH
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=Vc2E
-----END PGP SIGNATURE-----
Merge tag 'ixp4xx-dts-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into arm/dt
IXP4xx patches for the v5.18 kernel cycle:
- Fix up the WG302 to support the v1 version (also tested)
- Fix up the syscon size
- Drop the alias for UART1 in GW7001
* tag 'ixp4xx-dts-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
ARM: dts: Drop serial 1 alias on GW7001
ARM: dts: ixp42x: Expand syscon register range
ARM: dts: ixp4xx: Fix up the Netgear WG302 device tree
Link: https://lore.kernel.org/r/CACRpkdaMk+XECwhXJYeiF8SMU6cQsj_dk8gGMoPE3zAURAPqTw@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The Quanta S6Q is a server platform with AST2600 BMC SoC
Signed-off-by: George Hung <george.hung@quantatw.com>
Reviewed-by: Alan Kuo <Alan_Kuo@quantatw.com>
Reviewed-by: P.K. Lee <p.k.lee@quantatw.com>
Link: https://lore.kernel.org/r/20220217031355.46102-1-george.hung@quantatw.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Add support for the SanCloud BBE Extended WiFi board which shares common
hardware with other BBE varients. Compared to the vanilla BBE, this
particular model:
* adds a WiFi+Bluetooth module connected via SDIO and UART.
* drops the HDMI encoder, barometer and accelerometer.
Signed-off-by: Paul Barker <paul.barker@sancloud.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The version we can support (because of access to the hardware)
is WG302v1, so rename the file and make the following
modifications:
- We have 32MB memory not 16MB
- The default console speed is 9600 baud so use this
- The device has no ATA disk nor USB so drop the /dev/sda1
default mount, this needs to mount ramdisk or NFS
- Both serial0 and serial1 cannot be assigned with aliases,
just assign serial0
- The Flash is just 8MB so augment the size
- The Flash FIS index is at eraseblock 0x3f
- The PHY is at MDIO address 30
Tested by bringing the Netgear WG302v1 up to userspace using
initramfs appended to the kernel and downloaded over TFTP,
then ifconfig to bring up eth0 and pinging the host. All
works fine including SSH into the device from the host.
Cc: Zoltan HERPAI <wigyori@uid0.hu>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The Raspberry Pi Zero 2 W mostly bases on the Raspberry Pi Zero W with
the following differences:
* Broadcom BCM2710A1, quad-core 64-bit SoC @ 1 GHz
* Synaptics BCM43436 (reported as BCM43430B0) IEEE 802.11b/g/n wireless LAN
Contrary to the Raspberry Pi 3 boards there is no GPIO expander.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
The DongShanPiOne is little SigmaStar SSD202D based module
from 100ask.
Add an initial dts for this board.
Link: http://linux-chenxing.org/infinity2/dongshanpione/
Signed-off-by: Daniel Palmer <daniel@0x0f.com>
Miyoo has released a portable retro games machine based
on the SigmaStar SSD202D. Add the initial device tree
for this machine. Just enough to get to an initramfs
shell.
Link: http://linux-chenxing.org/infinity2/miyoomini/
Signed-off-by: Daniel Palmer <daniel@0x0f.com>
The Wireless Tag IDO-SBC2D06-V1B-22W[1] is an SBC powered by SSD202D
with a dual Ethernet and a connector for a 4-inch and 7-inch display.
It embeds a System-On-Module IDO-SOM2D01[2] with an Mstar SSD202 SoC
dual-core Cortex-A7 CPU @ 1.2Ghz , 2D GPU, 128 MB DDR3 (on-chip) and
a 256MB SPI NAND flash. This commit adds basic definition for this
board.
1. http://linux-chenxing.org/infinity2/ido-sbc2d06
2. http://www.wireless-tag.com/portfolio/ido-som2d01
Signed-off-by: Romain Perier <romain.perier@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Daniel Palmer <daniel@0x0f.com>
A series of fixes for omap variants for minor issues, and a fix for a timer
regression for some omap3 beagleboard versions.
The timer fix needs to patch both the dts and the timer code because
otherwise the timer quirk handling for old dtbs will prevent the dts fix
from working.
The other changes are for issues found by automated analysis, a macasp
typo fix, and two cosmetic fixes for clocks.
-----BEGIN PGP SIGNATURE-----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=hMu7
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=iogZ
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.17/fixes-for-merge-window-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes
Fixes for omaps
A series of fixes for omap variants for minor issues, and a fix for a timer
regression for some omap3 beagleboard versions.
The timer fix needs to patch both the dts and the timer code because
otherwise the timer quirk handling for old dtbs will prevent the dts fix
from working.
The other changes are for issues found by automated analysis, a macasp
typo fix, and two cosmetic fixes for clocks.
* tag 'omap-for-v5.17/fixes-for-merge-window-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: Don't use legacy clock defines for dra7 clkctrl
clk: ti: Move dra7 clock devices out of the legacy section
ARM: dts: Fix timer regression for beagleboard revision c
ARM: dts: am335x-wega: Fix typo in mcasp property rx-num-evt
ARM: OMAP2+: adjust the location of put_device() call in omapdss_init_of
ARM: OMAP2+: hwmod: Add of_node_put() before break
Link: https://lore.kernel.org/r/pull-1641801310-149268@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This patch presents the DT patches for the emtrion GmbH
Argon board series. They are available with STM32MP157
from STMicroelectronics with 512 MByte Memory.
The devicetree stm32mp157c-emstamp-argon.dtsi is the common part
providing the module components and the basic support for the SoC.
The support for the emSBC-Argon baseboard in the developer-kit
configuration is provided by the stm32mp157c-emsbc-argon.dts file.
Signed-off-by: Reinhold Mueller <reinhold.mueller@emtrion.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Klimt WiFi has the product name Samsung Galaxy Tab S 8.4". Board is
based on Exynos 5420, and has similar hardware to Chagall WiFi, but
with a smaller battery, smaller screen and another touchscreen
controller.
The device tree added here contains support for:
- UART access through a micro-usb cable with 619 kOhm between ID & GND
- Accessing the internal eMMC storage
- Accessing an external SD card
- USB, after configuration it is possible to ssh into the device
through a usb cable
Signed-off-by: Henrik Grimler <henrik@grimler.se>
Link: https://lore.kernel.org/r/20220124131241.29946-3-henrik@grimler.se
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
The Marsboard A20 is a A20 based SBC with 1G RAM, 8G Flash, micro SD
card slot , SATA socketm 10/100 ethernet, HDMI port, 4 USB2.0 ports, 2
USB2.0 OTG, USB WIFI(RTL8188EU) with antenna.
Signed-off-by: Conley Lee <conleylee@foxmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/tencent_C2E26D0935C9157CB3597BA4BD3316E8940A@qq.com
Chagall WiFi, with product name Samsung Galaxy Tab S 10.5", is based
on Exynos 5420. This device is one of several tablet models released
in 2014 based on Exynos 5420.
The device tree added here contains support for:
- UART
- eMMC
- SD card
- USB
CCI has been disabled in the hardware, enabling it would require
(de-)soldering a resistor on the board. Trying to boot with it
enabled in kernel makes the device hang when CCI is probed.
Exynos5420-arndale-octa also has had CCI disabled due to issues, see
commit 25217fef35 ("ARM: dts: disable CCI on exynos5420 based
arndale-octa").
Signed-off-by: Henrik Grimler <henrik@grimler.se>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Link: https://lore.kernel.org/r/20220118185746.299832-4-henrik@grimler.se
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
To SDX55 this introduces the description of the IPA, PCIe PHY and PCIe
endpoint controller, as well as enables these for the FN960 device.
The SDX65 5G platform is introduced, currently with definitions
necessary to boot to a shell.
The undocumented property "input-name" is dropped throughout the dts
files, dwc3 nodes throughout gains more specific compatibles and lastly
building of the Dragonboard 410c DTB on ARM32 is enabled, in addition to
its normal operation in 64-bit mode.
-----BEGIN PGP SIGNATURE-----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=SjjW
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=rvAi
-----END PGP SIGNATURE-----
Merge tag 'qcom-dts-for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt
Qualcomm DeviceTree updates for v5.17
To SDX55 this introduces the description of the IPA, PCIe PHY and PCIe
endpoint controller, as well as enables these for the FN960 device.
The SDX65 5G platform is introduced, currently with definitions
necessary to boot to a shell.
The undocumented property "input-name" is dropped throughout the dts
files, dwc3 nodes throughout gains more specific compatibles and lastly
building of the Dragonboard 410c DTB on ARM32 is enabled, in addition to
its normal operation in 64-bit mode.
* tag 'qcom-dts-for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
ARM: dts: qcom: Drop input-name property
ARM: dts: qcom: sdx65: Add pincontrol node
ARM: dts: qcom: Add SDX65 platform and MTP board support
dt-bindings: arm: qcom: Document SDX65 platform and boards
dt-bindings: clock: Add SDX65 GCC clock bindings
ARM: dts: qcom: Build apq8016-sbc/DragonBoard 410c DTB on ARM32
ARM: dts: qcom: sdx55-t55: Enable IPA
ARM: dts: qcom: sdx55-fn980: Enable IPA
ARM: dts: qcom: sdx55-fn980: Enable PCIe EP
ARM: dts: qcom: sdx55: Add support for PCIe EP
ARM: dts: qcom: sdx55-fn980: Enable PCIE0 PHY
ARM: dts: qcom: sdx55: Add support for PCIe PHY
ARM: dts: qcom: update USB nodes with new platform specific compatible
Link: https://lore.kernel.org/r/20211221042154.3621955-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The TYAN S8036 is a server platform with an ASPEED AST2500 BMC.
Signed-off-by: Ali El-Haj-Mahmoud <aaelhaj@google.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20211130180110.2217042-1-aaelhaj@google.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
A large part of this is cleanups to existing device trees in order to
improve validation of the device trees using the dt-schema tooling.
This also contains a set of new device trees for various boards that
have been contributed by community members as well as fixes to existing
devices.
-----BEGIN PGP SIGNATURE-----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=2rZJ
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=WDGY
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.17-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt
ARM: tegra: Changes for v5.17-rc1
A large part of this is cleanups to existing device trees in order to
improve validation of the device trees using the dt-schema tooling.
This also contains a set of new device trees for various boards that
have been contributed by community members as well as fixes to existing
devices.
* tag 'tegra-for-5.17-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: (55 commits)
ARM: tegra: Add host1x hotflush reset on Tegra124
ARM: tegra: Add memory client hotflush resets on Tegra114
ARM: tegra: Add back gpio-ranges properties
ARM: tegra: paz00: Enable S/PDIF and HDMI audio
ARM: tegra: acer-a500: Enable S/PDIF and HDMI audio
ARM: tegra: Add HDMI audio graph to Tegra20 device-tree
ARM: tegra: Add S/PDIF node to Tegra20 device-tree
ARM: tegra20/30: Disable unused host1x hardware
ARM: tegra: Add Memory Client resets to Tegra30 GR2D, GR3D and Host1x
ARM: tegra: Add Memory Client resets to Tegra20 GR2D, GR3D and Host1x
ARM: tegra: Add OPP tables and power domains to Tegra30 device-trees
ARM: tegra: Add OPP tables and power domains to Tegra20 device-trees
ARM: tegra: Add 500 MHz entry to Tegra30 memory OPP table
ARM: tegra: Enable video decoder on Tegra114
ARM: tegra: nexus7: Use common LVDS display device-tree
ARM: tegra: Add CPU thermal zones to Nyan device-tree
ARM: tegra: Enable CPU DFLL on Nyan
ARM: tegra: Enable HDMI CEC on Nyan
ARM: tegra: Add usb-role-switch property to USB OTG ports
ARM: tegra: Add device-tree for 1080p version of Nyan Big
...
Link: https://lore.kernel.org/r/20211217162253.1801077-5-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- New board support: TQ-Systems MBa6x, Y Soft IOTA Crux/Crux+ board,
JOZ Access Point, Phytec PEB-WLBT-05 support, BSH SMM-M2 IMX6ULZ
SystemMaster.
- Update SPBA bus node name to match binding schema.
- A series from Christoph Niedermaier to update imx6qdl-dhcom board
around Ethernet and USB support.
- A series from Giulio Benetti to clean up undocumented/unused fixed
clock compatibles.
- A series from Laurent Pinchart to update i.MX7 MIPI_CSI support.
- A couple of changes from Russell to update phy-mode for
vf610-zii-dev-rev-b board.
- Add Wacom digitizer support for imx7d-remarkable2 device.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmG9f3QUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM6v0Qf9EgOkEu4fn/GBbOXBBuh3bWMdw4vB
bJLQ4Ry6iqo/EDscbTWyjjVxlnIYRDa1D8d9ndZcs2wHY0TQhG87/KmH43iHmOAw
vdvIHoe3cgQuFrk15k/bgi2MQm9g8MayugK5xshiLQvOOpSUCBQHuk4oLyRACR3q
m1dpwe5CNaVABjuwZKHlmZq0DNGvN2QJosUbKyl6j8Bxo98I3sjHno0uNHfNaoPP
B7XUOozHf1mAoTBHVb22Ej0Zbpy5FiprOYZKhP7rvuQOnRhg7NcByIhd/s8uQAjA
t3Owq1VCZVEC98sHaZcN2qdAs8n42S+hPHT0WuV0v7SaV4hDCGxXipvxfg==
=uwuV
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=cSJH
-----END PGP SIGNATURE-----
Merge tag 'imx-dt-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt
i.MX arm device tree change for 5.17:
- New board support: TQ-Systems MBa6x, Y Soft IOTA Crux/Crux+ board,
JOZ Access Point, Phytec PEB-WLBT-05 support, BSH SMM-M2 IMX6ULZ
SystemMaster.
- Update SPBA bus node name to match binding schema.
- A series from Christoph Niedermaier to update imx6qdl-dhcom board
around Ethernet and USB support.
- A series from Giulio Benetti to clean up undocumented/unused fixed
clock compatibles.
- A series from Laurent Pinchart to update i.MX7 MIPI_CSI support.
- A couple of changes from Russell to update phy-mode for
vf610-zii-dev-rev-b board.
- Add Wacom digitizer support for imx7d-remarkable2 device.
* tag 'imx-dt-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (36 commits)
ARM: dts: imx6: phytec: Add PEB-WLBT-05 support
ARM: dts: imx6qdl: phytec: Add support for optional PEB-AV-02 LCD adapter
ARM: dts: imx6qdl: phytec: Add support for optional PEB-EVAL-01 board
ARM: dts: imx6qdl-dhcom: Add USB overcurrent pin on SoM layer
ARM: dts: imx7d-remarkable2: add wacom digitizer device
ARM: dts: imx6ulz-bsh-smm-m2: Add BSH SMM-M2 IMX6ULZ SystemMaster
ARM: dts: imx6qdl-dhcom: Identify the PHY by ethernet-phy-id0007.c0f0
ARM: dts: imx6qdl-dhcom: Align PHY reset timing with other DHCOM SoMs
ARM: dts: imx6qdl: drop "fsl,imx-ckih1"
ARM: dts: imx6qdl: drop "fsl,imx-ckil"
ARM: dts: imx6qdl: drop "fsl,imx-osc"
ARM: dts: imx53: drop "fsl,imx-ckih2"
ARM: dts: imx53: drop "fsl,imx-ckih1"
ARM: dts: imx53: drop "fsl,imx-ckil"
ARM: dts: imx53: drop "fsl,imx-osc"
ARM: dts: imx51: drop "fsl,imx-ckih2"
ARM: dts: imx51: drop "fsl,imx-ckih1"
ARM: dts: imx51: drop "fsl,imx-ckil"
ARM: dts: imx51: drop "fsl,imx-osc"
ARM: dts: imx50: drop "fsl,imx-ckih2"
...
Link: https://lore.kernel.org/r/20211218071427.26745-4-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Commit e428e250fd ("ARM: dts: Configure system timers for omap3")
caused a timer regression for beagleboard revision c where the system
clockevent stops working if omap3isp module is unloaded.
Turns out we still have beagleboard revisions a-b4 capacitor c70 quirks
applied that limit the usable timers for no good reason. This also affects
the power management as we use the system clock instead of the 32k clock
source.
Let's fix the issue by adding a new omap3-beagle-ab4.dts for the old timer
quirks. This allows us to remove the timer quirks for later beagleboard
revisions. We also need to update the related timer quirk check for the
correct compatible property.
Fixes: e428e250fd ("ARM: dts: Configure system timers for omap3")
Cc: linux-kernel@vger.kernel.org
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Rob Herring <robh+dt@kernel.org>
Reported-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Tested-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Add dedicated device-tree for 1080p version of Nyan Big in order to
describe display panel properly. FHD panel doesn't support modes other
than 1080p, hence it's wrong to use incompatible lower resolution panel
in device-tree.
Tested-by: Thomas Graichen <thomas.graichen@gmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add device-tree for ASUS Transformer Pad TF300TG, which is a NVIDIA
Tegra30-based 2-in-1 detachable, originally running Android. It's a
variant of the TF300T that has a 3G modem.
Link: https://wiki.postmarketos.org/wiki/ASUS_Transformer_Pad_(asus-tf300t)
Co-developed-by: Ion Agorria <ion@agorria.com>
Signed-off-by: Ion Agorria <ion@agorria.com>
Co-developed-by: Maxim Schwalm <maxim.schwalm@gmail.com>
Signed-off-by: Maxim Schwalm <maxim.schwalm@gmail.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
[treding@nvidia.com: cosmetic fixups]
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add basic devicetree support for SDX65 platform and MTP board from
Qualcomm. The SDX65 platform features an ARM Cortex A7 CPU which forms
the Application Processor Sub System (APSS) along with standard Qualcomm
peripherals like GCC, TLMM, BLSP, QPIC, and BAM etc... Also, there
exists the networking parts such as IPA, MHI, PCIE-EP, EMAC, and Modem
etc..
This commit adds basic devicetree support that includes GCC, RPMh clock, INTC
and Debug UART.
Signed-off-by: Vamsi Krishna Lanka <quic_vamslank@quicinc.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1635552125-16407-3-git-send-email-quic_vamslank@quicinc.com
- Add the LEDs to the Freecom FSG-3 that were missing.
- Add a devicetree for the Gorami MultiLink Router
- Add a devicetree for the Gateway GW7001 Router
This completes the migration of all IXP4xx devices to
device tree files.
Next merge window we will delete the remaining board files,
it cannot be done now because of cross-tree dependencies.
-----BEGIN PGP SIGNATURE-----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=Hzm2
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=LdLA
-----END PGP SIGNATURE-----
Merge tag 'ixp4xx-dtx-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into arm/dt
IXP4xx DTS changes for v5.17:
- Add the LEDs to the Freecom FSG-3 that were missing.
- Add a devicetree for the Gorami MultiLink Router
- Add a devicetree for the Gateway GW7001 Router
This completes the migration of all IXP4xx devices to
device tree files.
Next merge window we will delete the remaining board files,
it cannot be done now because of cross-tree dependencies.
* tag 'ixp4xx-dtx-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
ARM: dts: ixp4xx: Add devicetree for Gateway 7001
ARM: dts: Add Goramo MultiLink device tree
ARM: dts: Add FSG3 system controller and LEDs
Link: https://lore.kernel.org/r/CACRpkdYiWK7TEbZrh4_0WT5obMk=ZSc7AQVUSPXL+-uZ_hsUEA@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The DragonBoard 410c is a convenient device for testing and debugging.
Since there is support for using ARM32 kernels on MSM8916 now, also
build the DB410c DTB on ARM32 so it can be used for testing. ARM64
is still the main supported architecture for DB410c but it actually
works great on ARM32 as well.
The "apq8016-sbc.dts" is simply included as-is from ARM64 similar
to the approach used for Raspberry Pi (e.g. bcm2711-rpi-4-b.dts).
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211213113250.4249-1-stephan@gerhold.net
This adds a device tree for the Gateway 7001 AP, based on
Intel IXP422.
Cc: Imre Kaloz <kaloz@openwrt.org>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
