Commit graph

15 commits

Author SHA1 Message Date
Michael McCormick
051abf5524 rtc: pcf85063: fix clearing bits in pcf85063_start_clock
Bit clear operation was missing ~

Signed-off-by: Michael McCormick <michael.mccormick@enatel.net>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-03-17 14:20:57 +01:00
Alexandre Belloni
965271df5a rtc: pcf85063: remove useless indirection
pcf85063_get_datetime and pcf85063_set_datetime are only used after casting
dev to an i2c_client. Remove that useless indirection.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-03-17 14:20:47 +01:00
Alexandre Belloni
0a6b8886fd rtc: pcf85063: stop validating rtc_time in .read_time
The RTC core is always calling rtc_valid_tm after the read_time callback.
It is not necessary to call it before returning from the callback.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-03-17 14:20:46 +01:00
Mirza Krak
c18b4c52c7 rtc: pcf85063: do not register a RTC device if chip is not present
Add a sanity check to see if chip is present. If we can not communicate
with the chip there is no point in registering a RTC device.

Signed-off-by: Mirza Krak <mirza.krak@hostmobility.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-11-04 23:08:59 +01:00
Chris DeBruin
0d981f81e0 rtc: pcf85063: Add support for the PCF85063A device
The current rtc-pcf85063 driver only supports the PCF85063TP device.
Using the existing driver on a PCF85063A will result in the time being
set correctly into the RTC, but the RTC is held in the stopped state.
Therefore, the time will no longer advance and no error is indicated.

The PCF85063A device has a bigger memory map than the PCF85063TP.
The existing driver make use of an address rollover condition,
but the rollover point is different in the two devices.

Signed-off-by: Chris DeBruin <cdeb5783@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-07-19 19:11:54 +02:00
Alexandre Belloni
c421ce7265 rtc: pcf85063: fix year range
The year range is not validated properly

As the driver has been mainlined in 2014, it is not an issue to stop
handling dates between 1970 and 2000 with the benefit of handling dates up
to 2100.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-07-19 19:11:12 +02:00
Alexandre Belloni
2da424af45 rtc: pcf85063: remove struct pcf85063
No members of struct pcf85063 are used anymore, remove the whole structure.

Reviewed-by: Juergen Borleis <jbe@pengutronix.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14 17:08:30 +01:00
Alexandre Belloni
a2892bf445 rtc: pcf85063: remove useless DRV_VERSION
Since the driver is mainlined there is no use for a separate version
number.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14 17:08:29 +01:00
Alexandre Belloni
ba270bbbf4 rtc: pcf85063: remove useless century handling
pcf85063_get_datetime() tries to handle a century bit but that bit is not
documented and the final value is never used anywhere else in the kernel.

Reviewed-by: Juergen Borleis <jbe@pengutronix.de>
Tested-by: Ulrich Ölmann <u.oelmann@pengutronix.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14 17:08:26 +01:00
Juergen Borleis
31d4d33ef4 rtc: pcf85063: fix time/date setting
When setting a new time/date the RTC's clock must be stopped first, in
order to write the time/date registers in an atomic manner.
So, this change stops the clock first and then writes the time/date
registers and the clock control register (to re-enable the clock) in one
turn.

Signed-off-by: Juergen Borleis <jbe@pengutronix.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14 17:08:17 +01:00
Juergen Borleis
6cc4c8b1e3 rtc: pcf85063: fix time/date reading
Check if the RTC signals an invalid time/date (due to a battery power loss
for example). In this case ignore the time/date until it is really set again.

Signed-off-by: Juergen Borleis <jbe@pengutronix.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14 17:08:17 +01:00
Juergen Borleis
7b5768486a rtc: pcf85063: simplify code to read the current time
By using i2c_smbus_read_i2c_block_data() the code is now much simpler.

While at it: when reading the RTC's seconds register, all time/date registers
are frozen until the RTC's year register is read. So it is important to read
all time/date registers in one turn to not lose a second event. Make it more
clear why the read must happen in this way.

Signed-off-by: Juergen Borleis <jbe@pengutronix.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14 17:08:17 +01:00
Alexandre Belloni
5413eaba5a rtc: pcf85063: return an error when date is invalid
Return an error when the date is invalid as the policy should be
implemented there.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-11-08 14:12:26 +01:00
Krzysztof Kozlowski
b28845433e rtc: Drop owner assignment from i2c_driver
i2c_driver does not need to set an owner because i2c_register_driver()
will set it.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-09-05 13:19:06 +02:00
Søren Andersen
796b7abb33 rtc: add pcf85063 support
Add support for the pcf85063 rtc chip.

[akpm@linux-foundation.org: fix comment typo, tweak conding style]
Signed-off-by: Soeren Andersen <san@rosetechnology.dk>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-08 15:57:20 -07:00