Apple SoCs contain eFuses used to store factory-programmed data such
as calibration values for the PCIe or the Type-C PHY. They are organized
as 32bit values exposed as MMIO.
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220429162701.2222-6-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some hardware may have NVMEM cells described in Device Tree using
individual nodes. Let drivers pass such nodes to the NVMEM subsystem so
they can be later used by NVMEM consumers.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220429162701.2222-2-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Printing probe success is discouraged, because we can use tracing for
this purpose. Remove useless print message after Sunplus OCOTP driver
probe.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20220321110326.44652-3-krzk@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The "sp_otp_v0" file scope variable is not used outside, so make it
static to fix warning:
drivers/nvmem/sunplus-ocotp.c:74:29: sparse:
sparse: symbol 'sp_otp_v0' was not declared. Should it be static?
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20220321110326.44652-2-krzk@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
"bcm_otpc_acpi_ids" is used with ACPI_PTR, so a build with !CONFIG_ACPI
has a warning:
drivers/nvmem/bcm-ocotp.c:247:36: error:
‘bcm_otpc_acpi_ids’ defined but not used [-Werror=unused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20220321110326.44652-1-krzk@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
sc7180 blow fuses got slightly chances to hit qfprom_reg_write timeout.
Current timeout is simply too low. Since blowing fuses is a
very rare operation, so the risk associated with overestimating this
number is low.
Increase fuse blow timeout from 1ms to 10ms.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Knox Chiou <knoxchiou@chromium.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220223223502.29454-2-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support for the Security Fuse Processor found on Layerscape SoCs.
This driver implements basic read access.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220220151527.17216-10-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
D1 has a smaller eFuse block than some other recent SoCs, and it no
longer requires a workaround to read the eFuse data.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220220151527.17216-7-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
nvmem_unregister() frees resources and standard pattern is to allow
caller to not care if it's NULL or not. This will reduce burden on
the callers to perform this check.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220220151527.17216-4-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Slightly simplify the devm_nvmem_register() by using the
devm_add_action_or_reset().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220220151527.17216-3-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are no users and seems no will come of the devm_nvmem_unregister().
Remove the function and remove the unused devm_nvmem_match() along with it.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220220151527.17216-2-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wp-gpios property can be used on NVMEM nodes and the same property can
be also used on MTD NAND nodes. In case of the wp-gpios property is
defined at NAND level node, the GPIO management is done at NAND driver
level. Write protect is disabled when the driver is probed or resumed
and is enabled when the driver is released or suspended.
When no partitions are defined in the NAND DT node, then the NAND DT node
will be passed to NVMEM framework. If wp-gpios property is defined in
this node, the GPIO resource is taken twice and the NAND controller
driver fails to probe.
It would be possible to set config->wp_gpio at MTD level before calling
nvmem_register function but NVMEM framework will toggle this GPIO on
each write when this GPIO should only be controlled at NAND level driver
to ensure that the Write Protect has not been enabled.
A way to fix this conflict is to add a new boolean flag in nvmem_config
named ignore_wp. In case ignore_wp is set, the GPIO resource will
be managed by the provider.
Fixes: 2a127da461 ("nvmem: add support for the write-protect pin")
Cc: stable@vger.kernel.org
Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220220151432.16605-2-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In order to support nvmem bits property, should support minimum 1 byte
read stride and minimum 1 byte read granularity at the same time.
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20211209174235.14049-4-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For some reason we never set the size for nvmem sysfs binary file.
Set this.
Reported-by: Gilles BULOZ <gilles.buloz@kontron.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20211130133909.6154-1-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add .cell_post_process callback for imx-ocotp to deal with MAC address,
since MAC address need to be reversed byte for some i.MX SoCs.
Tested-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20211013131957.30271-4-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some NVMEM providers have certain nvmem cells encoded, which requires
post processing before actually using it.
For example mac-address is stored in either in ascii or delimited or reverse-order.
Having a post-process callback hook to provider drivers would enable them to
do this vendor specific post processing before nvmem consumers see it.
Tested-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20211013131957.30271-3-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the existing design, we do not create a instance per nvmem cell consumer
but we directly refer cell from nvmem cell list that are added to provider.
However this design has some limitations when consumers want to assign name
or connection id the nvmem cell instance, ex: via "nvmem-cell-names" or
id in nvmem_cell_get(id).
Having a name associated with nvmem cell consumer instance will help
provider drivers in performing post processing of nvmem cell data if required
before data is seen by the consumers. This is pretty normal with some vendors
storing nvmem cells like mac-address in a vendor specific data layouts that
are not directly usable by the consumer drivers.
With this patch nvmem cell will be created dynamically during nvmem_cell_get
and destroyed in nvmem_cell_put, allowing consumers to associate name with
nvmem cell consumer instance.
With this patch a new struct nvmem_cell_entry replaces struct nvmem_cell
for storing nvmem cell information within the core.
This patch does not change nvmem-consumer interface based on nvmem_cell.
Tested-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20211013131957.30271-2-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If a cell has 'nbits' equal to a multiple of BITS_PER_BYTE the logic
*p &= GENMASK((cell->nbits%BITS_PER_BYTE) - 1, 0);
will become undefined behavior because nbits modulo BITS_PER_BYTE is 0, and we
subtract one from that making a large number that is then shifted more than the
number of bits that fit into an unsigned long.
UBSAN reports this problem:
UBSAN: shift-out-of-bounds in drivers/nvmem/core.c:1386:8
shift exponent 64 is too large for 64-bit type 'unsigned long'
CPU: 6 PID: 7 Comm: kworker/u16:0 Not tainted 5.15.0-rc3+ #9
Hardware name: Google Lazor (rev3+) with KB Backlight (DT)
Workqueue: events_unbound deferred_probe_work_func
Call trace:
dump_backtrace+0x0/0x170
show_stack+0x24/0x30
dump_stack_lvl+0x64/0x7c
dump_stack+0x18/0x38
ubsan_epilogue+0x10/0x54
__ubsan_handle_shift_out_of_bounds+0x180/0x194
__nvmem_cell_read+0x1ec/0x21c
nvmem_cell_read+0x58/0x94
nvmem_cell_read_variable_common+0x4c/0xb0
nvmem_cell_read_variable_le_u32+0x40/0x100
a6xx_gpu_init+0x170/0x2f4
adreno_bind+0x174/0x284
component_bind_all+0xf0/0x264
msm_drm_bind+0x1d8/0x7a0
try_to_bring_up_master+0x164/0x1ac
__component_add+0xbc/0x13c
component_add+0x20/0x2c
dp_display_probe+0x340/0x384
platform_probe+0xc0/0x100
really_probe+0x110/0x304
__driver_probe_device+0xb8/0x120
driver_probe_device+0x4c/0xfc
__device_attach_driver+0xb0/0x128
bus_for_each_drv+0x90/0xdc
__device_attach+0xc8/0x174
device_initial_probe+0x20/0x2c
bus_probe_device+0x40/0xa4
deferred_probe_work_func+0x7c/0xb8
process_one_work+0x128/0x21c
process_scheduled_works+0x40/0x54
worker_thread+0x1ec/0x2a8
kthread+0x138/0x158
ret_from_fork+0x10/0x20
Fix it by making sure there are any bits to mask out.
Fixes: 69aba7948c ("nvmem: Add a simple NVMEM framework for consumers")
Cc: Douglas Anderson <dianders@chromium.org>
Cc: stable@vger.kernel.org
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20211013124511.18726-1-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Nintendo Wii and Wii U OTP is only present on Nintendo Wii and Wii U
consoles. Hence add a dependency on WII, to prevent asking the user
about this driver when configuring a kernel without Nintendo Wii and Wii
U console support.
Fixes: 3683b761fe ("nvmem: nintendo-otp: Add new driver for the Wii and Wii U OTP")
Reviewed-by: Emmanuel Gil Peyrot <linkmauve@linkmauve.fr>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/01318920709dddc4d85fe895e2083ca0eee234d8.1631611652.git.geert+renesas@glider.be
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This OTP is read-only and contains various keys used by the console to
decrypt, encrypt or verify various pieces of storage.
Its size depends on the console, it is 128 bytes on the Wii and
1024 bytes on the Wii U (split into eight 128 bytes banks).
It can be used directly by writing into one register and reading from
the other one, without any additional synchronisation.
This driver was written based on reversed documentation, see:
https://wiiubrew.org/wiki/Hardware/OTP
Tested-by: Jonathan Neuschäfer <j.ne@posteo.net> # on Wii
Tested-by: Emmanuel Gil Peyrot <linkmauve@linkmauve.fr> # on Wii U
Signed-off-by: Emmanuel Gil Peyrot <linkmauve@linkmauve.fr>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210810153036.1494-3-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Current error path on failure of validating keepout regions is calling
put_device, eventhough the device is not even registered at that point.
Fix this by adding proper error handling of freeing ida and nvmem.
Fixes: fd3bb8f54a ("nvmem: core: Add support for keepout regions")
Cc: <stable@vger.kernel.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210806085947.22682-5-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On sc7280, to reliably blow fuses, we need an additional vote
on max performance state of 'MX' power-domain.
Add support for power-domain performance state voting in the
driver.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210806085947.22682-4-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
qfprom_disable_fuse_blowing() disables a bunch of resources,
and then does a few register writes in the 'conf' address
space.
It works perhaps because the resources are needed only for the
'raw' register space writes, and that the 'conf' space allows
read/writes regardless.
However that makes the code look confusing, so just move the
register writes before turning off the resources in the
function.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210806085947.22682-3-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here is the big set of char / misc and other driver subsystem updates
for 5.14-rc1. Included in here are:
- habanna driver updates
- fsl-mc driver updates
- comedi driver updates
- fpga driver updates
- extcon driver updates
- interconnect driver updates
- mei driver updates
- nvmem driver updates
- phy driver updates
- pnp driver updates
- soundwire driver updates
- lots of other tiny driver updates for char and misc drivers
This is looking more and more like the "various driver subsystems mushed
together" tree...
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYOM8jQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymECgCg0yL+8WxDKO5Gg5llM5PshvLB1rQAn0y5pDgg
nw78LV3HQ0U7qaZBtI91
=x+AR
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc driver updates from Greg KH:
"Here is the big set of char / misc and other driver subsystem updates
for 5.14-rc1. Included in here are:
- habanalabs driver updates
- fsl-mc driver updates
- comedi driver updates
- fpga driver updates
- extcon driver updates
- interconnect driver updates
- mei driver updates
- nvmem driver updates
- phy driver updates
- pnp driver updates
- soundwire driver updates
- lots of other tiny driver updates for char and misc drivers
This is looking more and more like the "various driver subsystems
mushed together" tree...
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (292 commits)
mcb: Use DEFINE_RES_MEM() helper macro and fix the end address
PNP: moved EXPORT_SYMBOL so that it immediately followed its function/variable
bus: mhi: pci-generic: Add missing 'pci_disable_pcie_error_reporting()' calls
bus: mhi: Wait for M2 state during system resume
bus: mhi: core: Fix power down latency
intel_th: Wait until port is in reset before programming it
intel_th: msu: Make contiguous buffers uncached
intel_th: Remove an unused exit point from intel_th_remove()
stm class: Spelling fix
nitro_enclaves: Set Bus Master for the NE PCI device
misc: ibmasm: Modify matricies to matrices
misc: vmw_vmci: return the correct errno code
siox: Simplify error handling via dev_err_probe()
fpga: machxo2-spi: Address warning about unused variable
lkdtm/heap: Add init_on_alloc tests
selftests/lkdtm: Enable various testable CONFIGs
lkdtm: Add CONFIG hints in errors where possible
lkdtm: Enable DOUBLE_FAULT on all architectures
lkdtm/heap: Add vmalloc linear overflow test
lkdtm/bugs: XFAIL UNALIGNED_LOAD_STORE_WRITE
...
'for_each_child_of_node' performs an of_node_get on each iteration, so a
return from the middle of the loop requires an of_node_put.
Fixes: e888d445ac ("nvmem: resolve cells from DT at registration time")
Cc: <stable@vger.kernel.org>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210611102321.11509-1-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Added enum and string for FRAM (ferroelectric RAM) to expose it as file
named "fram".
Added documentation of sysfs file.
Signed-off-by: Jiri Prchal <jiri.prchal@aksignal.cz>
Link: https://lore.kernel.org/r/20210611094601.95131-2-jiri.prchal@aksignal.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In review feedback Joe Perches found the existing comment
confusing. Let's use something based on the wording proposed by Joe.
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210611083348.20170-10-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The caller doesn't modify the memory pointed to by the pointer so it
can be const.
Suggested-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210611083348.20170-9-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix a missed newline, change an 'if' to 'else if' and update
a comment which is stale after the merge of '5a1bea2a: nvmem:
qfprom: Add support for fuseblowing on sc7280'
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210611083348.20170-8-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This device currently reports an "Unknown" type in sysfs.
Since it is an eFuse hardware device, set its type to OTP.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210611083348.20170-7-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
'ret' is known to be 0 here.
The expected error status is stored in 'status', so use it instead.
Also change %d in %u, because status is an u32, not a int.
Fixes: 096030e7f4 ("nvmem: sprd: Add Spreadtrum SoCs eFuse support")
Acked-by: Chunyan Zhang <zhang.lyra@gmail.com>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/5bc44aace2fe7e1c91d8b35c8fe31e7134ceab2c.1620406852.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Until now, the of_node of the parent device is used. Some devices
provide more than just the nvmem provider. To avoid name space clashes,
add a way to allow specifying the nvmem cells in subnodes. Consider the
following example:
flash@0 {
compatible = "jedec,spi-nor";
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
reg = <0x000000 0x010000>;
};
};
otp {
compatible = "user-otp";
#address-cells = <1>;
#size-cells = <1>;
serial-number@0 {
reg = <0x0 0x8>;
};
};
};
There the nvmem provider might be the MTD partition or the OTP region of
the flash.
Add a new config->of_node parameter, which if set, will be used instead
of the parent's of_node.
Signed-off-by: Michael Walle <michael@walle.cc>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20210424110608.15748-2-michael@walle.cc
Handle the differences across LDO voltage needed for blowing fuses,
and the blow timer value, identified using a minor version of 15
on sc7280.
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: Ravi Kumar Bokka <rbokka@codeaurora.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210330111241.19401-11-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The shifting of the u8 integer buf[3] by 24 bits to the left will
be promoted to a 32 bit signed int and then sign-extended to a
u64. In the event that the top bit of buf[3] is set then all
then all the upper 32 bits of the u64 end up as also being set
because of the sign-extension. Fix this by casting buf[i] to
a u64 before the shift.
Fixes: a28e824fb8 ("nvmem: core: Add functions to make number reading easy")
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Addresses-Coverity: ("Unintended sign extension")
Link: https://lore.kernel.org/r/20210330111241.19401-8-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sometimes the clients of nvmem just want to get a number out of
nvmem. They don't want to think about exactly how many bytes the nvmem
cell took up. They just want the number. Let's make it easy.
In general this concept is useful because nvmem space is precious and
usually the fewest bits are allocated that will hold a given value on
a given system. However, even though small numbers might be fine on
one system that doesn't mean that logically the number couldn't be
bigger. Imagine nvmem containing a max frequency for a component. On
one system perhaps that fits in 16 bits. On another system it might
fit in 32 bits. The code reading this number doesn't care--it just
wants the number.
We'll provide two functions: nvmem_cell_read_variable_le_u32() and
nvmem_cell_read_variable_le_u64().
Comparing these to the existing functions like nvmem_cell_read_u32():
* These new functions have no problems if the value was stored in
nvmem in fewer bytes. It's OK to use these function as long as the
value stored will fit in 32-bits (or 64-bits).
* These functions avoid problems that the earlier APIs had with bit
offsets. For instance, you can't use nvmem_cell_read_u32() to read a
value has nbits=32 and bit_offset=4 because the nvmem cell must be
at least 5 bytes big to hold this value. The new API accounts for
this and works fine.
* These functions make it very explicit that they assume that the
number was stored in little endian format. The old functions made
this assumption whenever bit_offset was non-zero (see
nvmem_shift_read_buffer_in_place()) but didn't whenever the
bit_offset was zero.
NOTE: it's assumed that we don't need an 8-bit or 16-bit version of
this function. The 32-bit version of the function can be used to read
8-bit or 16-bit data.
At the moment, I'm only adding the "unsigned" versions of these
functions, but if it ends up being useful someone could add a "signed"
version that did 2's complement sign extension.
At the moment, I'm only adding the "little endian" versions of these
functions. Adding the "big endian" version would require adding "big
endian" support to nvmem_shift_read_buffer_in_place().
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210330111241.19401-7-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
QFPROM controller hardware requires 1.8V min for fuse blowing.
So, this change sets the voltage to 1.8V, required to blow the fuse
for qfprom-efuse controller.
To disable fuse blowing, we set the voltage to 0V since this may
be a shared rail and may be able to run at a lower rate when we're
not blowing fuses.
Fixes: 93b4e49f8c ("nvmem: qfprom: Add fuse blowing support")
Reported-by: Douglas Anderson <dianders@chromium.org>
Suggested-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Ravi Kumar Bokka <rbokka@codeaurora.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210330111241.19401-4-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
"sdam->pdev" is uninitialized and it is used to print error logs.
Fix it. Since device pointer can be used from sdam_config, use it
directly thereby removing pdev pointer.
Fixes: 40ce979879 ("nvmem: add QTI SDAM driver")
Cc: stable@vger.kernel.org
Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210205100853.32372-3-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
s/drivers/driver/ as the configuration selects a single driver.
Suggested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210205100853.32372-2-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The nvmem cell binding applies to all eeprom child nodes matching
"^.*@[0-9a-f]+$" without taking a compatible into account.
Linux drivers, like at24, are even more extensive and assume
_all_ at24 eeprom child nodes to be nvmem cells since e888d445ac
("nvmem: resolve cells from DT at registration time").
Since df5f3b6f53 ("dt-bindings: nvmem: stm32: new property for
data access"), the additionalProperties: True means it's Ok to have
other properties as long as they don't match "^.*@[0-9a-f]+$".
The barebox bootloader extends the MTD partitions binding to
EEPROM and can fix up following device tree node:
&eeprom {
partitions {
compatible = "fixed-partitions";
};
};
This is allowed binding-wise, but drivers using nvmem_register()
like at24 will fail to parse because the function expects all child
nodes to have a reg property present. This results in the whole
EEPROM driver probe failing despite the device tree being correct.
Fix this by skipping nodes lacking a reg property instead of
returning an error. This effectively makes the drivers adhere
to the binding because all nodes with a unit address must have
a reg property and vice versa.
Fixes: e888d445ac ("nvmem: resolve cells from DT at registration time").
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210129171430.11328-6-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Firmware/co-processors might use reserved memory areas in order to pass
data stemming from an nvmem device otherwise non accessible to Linux.
For example an EEPROM memory only physically accessible to firmware, or
data only accessible early at boot time.
In order to expose this data to other drivers and user-space, the driver
models the reserved memory area as an nvmem device.
Tested-by: Tim Gover <tim.gover@raspberrypi.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210129171430.11328-5-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The retrieval of driver data via of_device_get_match_data() can make
the code simpler.
Use of_device_get_match_data() to simplify the code.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210129171430.11328-3-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This doesn't call of_node_put() on the error path so it leads to a
memory leak.
Fixes: 0749aa25af ("nvmem: core: fix regression in of_nvmem_cell_get()")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210129171430.11328-2-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When offset is not 4 bytes aligned, directly shift righty by 2 bits
will cause reading out wrong data. Since imx ocotp only supports
4 bytes reading once, we need handle offset is not 4 bytes aligned
and enlarge the bytes to 4 bytes aligned. After reading finished,
copy the needed data from buffer to caller and free buffer.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20201127102837.19366-6-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some fuse ranges are protected by the XPU such that the AP cannot
access them. Attempting to do so causes an SError. Use the newly
introduced per-soc compatible string, and the newly introduced
nvmem keepout support to attach the set of regions
we should not access.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20201127102837.19366-5-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Introduce support into the nvmem core for arrays of register ranges
that should not result in actual device access. For these regions a
constant byte (repeated) is returned instead on read, and writes are
quietly ignored and returned as successful.
This is useful for instance if certain efuse regions are protected
from access by Linux because they contain secret info to another part
of the system (like an integrated modem).
Signed-off-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20201127102837.19366-3-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix missing 'kfree_const(cell->name)' when call to
nvmem_cell_info_to_nvmem_cell() in several places:
* after nvmem_cell_info_to_nvmem_cell() failed during
nvmem_add_cells()
* during nvmem_device_cell_{read,write} when cell->name is
kstrdup'ed() without calling kfree_const() at the end, but
really there is no reason to do that 'dup, because the cell
instance is allocated on the stack for some short period to be
read/write without exposing it to the caller.
So the new nvmem_cell_info_to_nvmem_cell_nodup() helper is introduced
which is used to convert cell_info -> cell without name duplication as
a lighweight version of nvmem_cell_info_to_nvmem_cell().
Fixes: e2a5402ec7 ("nvmem: Add nvmem_device based consumer apis.")
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu>
Link: https://lore.kernel.org/r/20200923204456.14032-1-vadym.kochan@plvision.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
of_parse_phandle() returns device_node with incremented ref count
which needs to be decremented by of_node_put() when device_node
is not used.
Fixes: e2a5402ec7 ("nvmem: Add nvmem_device based consumer apis.")
Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200917134437.16637-5-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We don't need to specify any ranges when allocating IDs so we can switch
to ida_alloc() and ida_free() instead of the ida_simple_ counterparts.
ida_simple_get(ida, 0, 0, gfp) is equivalent to
ida_alloc_range(ida, 0, UINT_MAX, gfp) which is equivalent to
ida_alloc(ida, gfp). Note: IDR will never actually allocate an ID
larger than INT_MAX.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200917134437.16637-4-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Using pdev->id as the nvmem's config ID (which, by default, is
NVMEM_DEVID_NONE) prevents multiple instances of this driver from
probing because of the following error:
sysfs: cannot create duplicate filename '/bus/nvmem/devices/spmi_sdam'
Use NVMEM_DEVID_AUTO as the NVMEM config ID to fix the issue.
Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200722100705.7772-15-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds support for blowing fuses to the qfprom driver if the
required properties are defined in the device tree.
[Srini: Fixed merge conflict with AUTO ID]
Signed-off-by: Ravi Kumar Bokka <rbokka@codeaurora.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200722100705.7772-12-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For nvmem providers which have multiple instances, it is required
to suffix the provider name with proper id, so that they do not
confict for the same name. Currently the core does not handle
this case properly eventhough core already has logic to generate the id.
This patch add new devid type NVMEM_DEVID_AUTO for providers to be
able to allow core to assign id and append it to provier name.
Reported-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Shawn Guo <shawn.guo@linaro.org>
Link: https://lore.kernel.org/r/20200722100705.7772-8-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Complement the u16, u32 and u64 helpers with a u8 variant to ease
accessing byte-sized values.
This helper will be useful for Realtek Digital Home Center platforms,
which store some byte and sub-byte sized values in non-volatile memory.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200722100705.7772-7-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It's "an unsigned" but "a U".
Similarly, "an entry" but "a binary entry".
While at it, also drop superfluous articles for negative and zero.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200722100705.7772-6-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support to the new efuse IP which is integrated in the SC2730
which includes multiple blocks in a single chip.
Signed-off-by: Freeman Liu <freeman.liu@unisoc.com>
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Reviewed-by: Baolin Wang <baolin.wang7@gmail.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200722100705.7772-5-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The 'struct nvmem_config' has a stride attribute that specifies the
needed alignment for accesses into the nvmem. This is used in
nvmem_cell_info_to_nvmem_cell() but not in the sysfs read/write
functions. If the alignment is important in one place it's important
everywhere, so let's add enforcement.
For now we'll consider it totally invalid to access with the wrong
alignment. We could relax this in the read case where we could just
read some extra bytes and throw them away. Relaxing it in the write
case seems harder (and less safe?) since we'd have to read some data
first and then write it back. To keep it symmetric we'll just
disallow it in both cases.
Reported-by: Ravi Kumar Bokka <rbokka@codeaurora.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Ravi Kumar Bokka <rbokka@codeaurora.org>
Tested-by: Ravi Kumar Bokka <rbokka@codeaurora.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200722100705.7772-4-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When call function devm_platform_ioremap_resource(), we should use IS_ERR()
to check the return value and return PTR_ERR() if failed.
Fixes: 096030e7f4 ("nvmem: sprd: Add Spreadtrum SoCs eFuse support")
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200722100705.7772-2-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
qfprom has different address spaces for read and write. Reads are
always done from corrected address space, where as writes are done
on raw address space.
Writing to corrected address space is invalid and ignored, so it
does not make sense to have this support in the driver which only
supports corrected address space regions at the moment.
Fixes: 4ab11996b4 ("nvmem: qfprom: Add Qualcomm QFPROM support.")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200522113341.7728-1-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes coccicheck warning:
drivers/nvmem/jz4780-efuse.c:214:1-3: WARNING: PTR_ERR_OR_ZERO can be used
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Samuel Zou <zou_wei@huawei.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200511145042.31223-4-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 2a127da461 ("nvmem: add support for the write-protect pin")
added support for handling write-protect pins to the nvmem core, and
Commit 1c89074bf8 ("eeprom: at24: remove the write-protect pin support")
retrofitted the at24 driver to use this support.
These changes broke write() on the nvmem sysfs attribute for eeproms
which utilize a write-protect pin, as the write callback invokes the
nvmem device's reg_write callback directly which no longer handles
changing the state of the write-protect pin.
Change the read and write callbacks for the sysfs attribute to invoke
nvmme_reg_read/nvmem_reg_write helpers which handle this, rather than
calling reg_read/reg_write directly.
Fixes: 2a127da461 ("nvmem: add support for the write-protect pin")
Signed-off-by: Michael Auchter <michael.auchter@ni.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200511145042.31223-3-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Several logic improvements to save many code lines:
- no need to use goto;
- no need to assign return value;
- combine different conditions of return value into one line.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200511145042.31223-2-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
file permission are derived based on various configs for
default nvmem sysfs file, reuse it to create the eeprom
compat file too.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200417121306.23121-1-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now that we are using is_bin_visible callback, we do not need
nvmem_sysfs_get_groups() anymore so move all the relevant data-structures
and code to core.c
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200325131951.31887-3-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
By using is_bin_visible callback to set permissions will remove a
large list of attribute groups. These group permissions can be
dynamically derived in the callback.
Also add checks for read/write callbacks and set permissions accordingly.
Suggested-by: Greg KH <gregkh@linuxfoundation.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200325131951.31887-2-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As we are planning to move to use sysfs is_bin_visible callback,
having root_only as part of nvmem_device will help decide correct
permissions.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200325122116.15096-2-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use devm_add_action_or_reset() for cleanup to call clk_unprepare(),
which can simplify the error handling in .probe, and .remove callback
can be dropped.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200323150007.7487-5-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We've saved the double data flag in the device data, so we should
use it when programming a block.
Signed-off-by: Baolin Wang <baolin.wang7@gmail.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200323150007.7487-4-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We have some cases that will programme the eFuse block partially multiple
times, so we should allow the block to be programmed again if it was
programmed partially. But we should lock the block if the whole block
was programmed. Thus add a condition to validate if we need lock the
block or not.
Moreover we only enable the auto-check function when locking the block.
Signed-off-by: Freeman Liu <freeman.liu@unisoc.com>
Signed-off-by: Baolin Wang <baolin.wang7@gmail.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200323150007.7487-3-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
According to the Spreadtrum eFuse specification, we should write 0 to
the block to trigger the lock operation.
Fixes: 096030e7f4 ("nvmem: sprd: Add Spreadtrum SoCs eFuse support")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Freeman Liu <freeman.liu@unisoc.com>
Signed-off-by: Baolin Wang <baolin.wang7@gmail.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200323150007.7487-2-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kbuild-robot did find a type error in the min(a, b)
function used by this driver if built for x86_64 or riscv.
Althought it is very unlikely that this driver is built
for those platforms it could be used as a template
for something else and therefore should be correct.
The problem is that we implicitly cast a size_t to
unsigned int inside the implementation of the min() function.
Since size_t may differ on different compilers and
plaforms there may be warnings or not.
So let's use only size_t variables on all platforms.
Reported-by: kbuild test robot <lkp@intel.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: srinivas.kandagatla@linaro.org
Cc: prasannatsmkumar@gmail.com
Cc: malat@debian.org
Cc: paul@crapouillou.net
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200310132257.23358-15-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch brings support for the JZ4780 efuse. Currently it only exposes
a read only access to the entire 8K bits efuse memory and nvmem cells.
To fetch for example the MAC address:
dd if=/sys/devices/platform/134100d0.efuse/jz4780-efuse0/nvmem bs=1 skip=34 count=6 status=none | xxd
Tested-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200310132257.23358-13-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Return -EPERM if reg_read is NULL in bin_attr_nvmem_read() or if
reg_write is NULL in bin_attr_nvmem_write().
This prevents NULL dereferences such as the one described in
03cd45d2e2 ("thunderbolt: Prevent crash if non-active NVMem file is
read")
Signed-off-by: Nicholas Johnson <nicholas.johnson-opensource@outlook.com.au>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200310132257.23358-10-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Put the write-protect GPIO descriptor in nvmem_release() so that it can
be automatically released when the associated device's reference count
drops to 0.
Fixes: 2a127da461 ("nvmem: add support for the write-protect pin")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Khouloud Touil <ktouil@baylibre.com>
Cc: stable <stable@vger.kernel.org>
[Bartosz: tweak the commit message]
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200310132257.23358-8-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We need to free the ida mapping and nvmem struct if the write-protect
GPIO lookup fails.
Fixes: 2a127da461 ("nvmem: add support for the write-protect pin")
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200310132257.23358-7-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Visibly separate the GPIO request from the previous operation in the
code with a newline.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200310132257.23358-6-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add nvmem_cell_read_u64() helper to ease read of an u64 value on consumer
side. This helper is useful on some sunxi platform that has 64 bits data
cells stored in no volatile memory.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200310132257.23358-4-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now there are nvmem_cell_read_u16 and nvmem_cell_read_u32.
They are very similar, let's strip out a common part.
And use nvmem_cell_read_common to simplify their implementation.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200310132257.23358-3-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
i.MX8MP has 96 banks with each bank 4 words. And it has different
ctrl register layout, so add new macros for that.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200310132257.23358-2-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull i2c updates from Wolfram Sang:
"i2c core:
- huge improvements and refactorizations of the Linux I2C
documentation (lots of thanks to Luca for doing it and Jean for the
careful review)
- subsystem wide API conversion to i2c_new_client_device()
- remove obsolete parport-light driver
- smaller core updates (removal of 'extern', enabling more compile
testing, use more helper macros)
- and quite a bunch of driver updates (new IDs, simplifications,
better PM, support of atomic transfers and other improvements)
i2c-mux:
- The main feature is the idle-state rework of the pca954x driver
from Biwen Li
at24 driver:
- minor maintenance: update the license tag, sort headers
- move support for the write-protect pin into nvmem core
- add a reference to the new wp-gpios property in nvmem to at25
bindings
- add support for regulator and pm_runtime control"
* 'i2c/for-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (91 commits)
i2c: cros-ec-tunnel: Fix ACPI identifier
i2c: cros-ec-tunnel: Fix slave device enumeration
i2c: stm32f7: add PM_SLEEP suspend/resume support
i2c: cadence: Fix wording in i2c-cadence driver
i2c: cadence: Fix power management order of operations
i2c: cadence: Fix error printing in case of defer
i2c: cadence: Handle transfer_size rollover
i2c: i801: Add support for Intel Comet Lake PCH-V
docs: i2c: writing-clients: properly name the stop condition
docs: i2c: i2c-protocol: use same wording as smbus-protocol
docs: i2c: rename sections so the overall picture is clearer
docs: i2c: old-module-parameters: use monospace instead of ""
docs: i2c: old-module-parameters: clarify this is for obsolete kernels
docs: i2c: old-module-parameters: fix internal hyperlink
docs: i2c: instantiating-devices: use monospace for sysfs attributes
docs: i2c: instantiating-devices: rearrange static instatiation
docs: i2c: instantiating-devices: fix internal hyperlink
docs: i2c: smbus-protocol: improve I2C Block transactions description
docs: i2c: smbus-protocol: fix punctuation
docs: i2c: smbus-protocol: fix typo
...
QTI SDAM driver allows PMIC peripherals to access the shared memory
that is available on QTI PMICs.
Use subsys_initcall as PMIC SDAM NV memory is accessed by multiple PMIC
drivers (charger, fuel gauge) to store/restore data across reboots
required during their initialization.
Signed-off-by: Anirudh Ghayal <aghayal@codeaurora.org>
Signed-off-by: Shyam Kumar Thella <sthella@codeaurora.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200116161100.30637-4-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Introduce ocotp_ctrl_reg to include the low 16bits mask of CTRL
register.
i.MX chips will have different layout of the low 16bits of CTRL
register, so use ocotp_ctrl_reg will make it clean to add new
chip support.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200109104017.6249-4-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
