Commit graph

66 commits

Author SHA1 Message Date
Divy Le Ray
6ba5f9c743 cxgb3: Update FW to 7.4.0
Update FW to 7.4.
Bump up driver revision.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-03 21:01:50 -07:00
Ken Kawasaki
f0a3a1538d 3c589_cs: add cis(firmware) of 3Com multifunction pcmcia card
3c589_cs,3c574_cs,serial_cs:

 (1)add cis(firmware) of 3Com lan&modem mulitifunction pcmcia card.
 (2)load correct configuration register for 3Com card
 
Signed-off-by: Ken Kawasaki <ken_kawasaki@spring.nifty.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-01 19:21:26 -07:00
Vladislav Zolotarov
94a78b79cb bnx2x: Separated FW from the source.
>From now on FW will be downloaded from the binary file using request_firmware.

There will be different files for every supported chip. Currently 57710 (e1) and
57711 (e1h).

File names have the following format: bnx2x-<chip version>-<FW version>.fw.
ihex versions of current FW files are submitted in the next patch.

Each binary file has a header in the following format:


struct bnx2x_fw_file_section {
	__be32 len;
	__be32 offset;
}

struct bnx2x_fw_file_hdr {
	struct bnx2x_fw_file_section init_ops;
	struct bnx2x_fw_file_section init_ops_offsets;
	struct bnx2x_fw_file_section init_data;
	struct bnx2x_fw_file_section tsem_int_table_data;
	struct bnx2x_fw_file_section tsem_pram_data;
	struct bnx2x_fw_file_section usem_int_table_data;
	struct bnx2x_fw_file_section usem_pram_data;
	struct bnx2x_fw_file_section csem_int_table_data;
	struct bnx2x_fw_file_section csem_pram_data;
	struct bnx2x_fw_file_section xsem_int_table_data;
	struct bnx2x_fw_file_section xsem_pram_data;
	struct bnx2x_fw_file_section fw_version;
}

Each bnx2x_fw_file_section contains the length and the offset of the appropriate
section in the binary file. Values are stored in the big endian format.

Data types of arrays:

init_data            __be32
init_ops_offsets     __be16
XXsem_pram_data         u8
XXsem_int_table_data    u8
init_ops             struct raw_op {
                          u8   op;
			__be24 offset;
                        __be32 data;
		     }
fw_version              u8

>From now boundaries of a specific initialization stage are stored in
init_ops_offsets array instead of being defined by separate macroes. The index 
in init_ops_offsets is calculated by BLOCK_OPS_IDX macro:

#define BLOCK_OPS_IDX(block, stage, end) \
       (2*(((block)*STAGE_IDX_MAX) + (stage)) + (end))

Security:

In addition to sanity check of array boundaries bnx2x will check a FW version.
Additional checks might be added in the future.

Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-27 03:27:43 -07:00
Ken Kawasaki
99b28c4709 pcnet_cs: add cis(firmware) of the Allied Telesis LA-PCM
pcnet_cs: add cis(firmware) of the Allied Telesis LA-PCM

Signed-off-by: Ken Kawasaki <ken_kawasaki@spring.nifty.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-21 02:06:14 -07:00
Linus Torvalds
1e17d774db Merge git://git.infradead.org/~dwmw2/firmware-2.6
* git://git.infradead.org/~dwmw2/firmware-2.6:
  qla1280: Fix off-by-some error in firmware loading.
  Add README.AddingFirmware file. Basically telling people not to.
  firmware: Remove newly-added slicoss and sxg firmware images
  firmware/WHENCE: Add missing origin information for Ambassador atmsar11.fw
  ALSA: wavefront - Always use request_firmware()
  Remove fdump tool for av7110 firmware
  firmware: convert av7110 driver to request_firmware()
  Partially revert "V4L/DVB (9533): cx88: Add support for TurboSight TBS8910 DVB-S PCI card"
  Revert "fix modules_install via NFS"

Add-add conflicts in firmware/WHENCE fixed manually
2009-04-10 12:01:22 -07:00
David Woodhouse
cec20f36d6 firmware: Remove newly-added slicoss and sxg firmware images
These are available elsewhere (for example in the linux-firmware.git
repository); they have no business being added to the kernel source
tree.

We are only putting stuff in the firmware/ directory of the kernel
source when it's extracted from long-standing drivers which used to
include it directly.

We didn't intend to open the floodgates to including megabytes of new
firmware which was previously being distributed separately.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-04-06 21:04:05 -07:00
Linus Torvalds
3989203290 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  b44: Use kernel DMA addresses for the kernel DMA API
  forcedeth: Fix resume from hibernation regression.
  xfrm: fix fragmentation on inter family tunnels
  ibm_newemac: Fix dangerous struct assumption
  gigaset: documentation update
  gigaset: in file ops, check for device disconnect before anything else
  bas_gigaset: use tasklet_hi_schedule for timing critical tasklets
  net/802/fddi.c: add MODULE_LICENSE
  smsc911x: remove unused #include <linux/version.h>
  axnet_cs: fix phy_id detection for bogus Asix chip.
  bnx2: Use request_firmware()
  b44: Fix sizes passed to b44_sync_dma_desc_for_{device,cpu}()
  socket: use percpu_add() while updating sockets_in_use
  virtio_net: Set the mac config only when VIRITO_NET_F_MAC
  myri_sbus: use request_firmware
  e1000: fix loss of multicast packets
  vxge: should include tcp.h

Conflict in firmware/WHENCE (SCSI vs net firmware)
2009-04-06 18:05:43 -07:00
Takashi Iwai
7c7cae17e0 ALSA: wavefront - Always use request_firmware()
Always use request_firmware() for loading yss225_registers image.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-04-06 14:38:43 -07:00
Jaswinder Singh
9137f05f7e firmware: convert av7110 driver to request_firmware()
Signed-off-by: Jaswinder Singh <jaswinder@infradead.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-04-06 14:34:12 -07:00
David Woodhouse
4528e42900 Partially revert "V4L/DVB (9533): cx88: Add support for TurboSight TBS8910 DVB-S PCI card"
This reverts a hunk of commit 4b29631db3
which seems to have been an accident, and which re-introduced a
previously fixed bug.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-04-06 14:27:20 -07:00
David Woodhouse
556b0f58bb Revert "fix modules_install via NFS"
This reverts commit 8b249b6856.

This 'fix' is not necessary; we just need to undo the damage caused
accidentally by Igor/Mauro in 4b29631db3
("V4L/DVB (9533): cx88: Add support for TurboSight TBS8910 DVB-S PCI card")

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-04-06 14:27:17 -07:00
Linus Torvalds
22eb5aa6c7 Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (74 commits)
  [SCSI] sg: fix q->queue_lock on scsi_error_handler path
  [SCSI] replace __inline with inline
  [SCSI] a2091: make 2 functions static
  [SCSI] a3000: make 2 functions static
  [SCSI] ses: #if 0 the unused ses_match_host()
  [SCSI] use kmem_cache_zalloc instead of kmem_cache_alloc/memset
  [SCSI] sg: fix iovec bugs introduced by the block layer conversion
  [SCSI] qlogicpti: use request_firmware
  [SCSI] advansys: use request_firmware
  [SCSI] qla1280: use request_firmware
  [SCSI] libiscsi: fix iscsi pool error path
  [SCSI] cxgb3i: call ddp release function directly
  [SCSI] cxgb3i: merge cxgb3i_ddp into cxgb3i module
  [SCSI] cxgb3i: close all tcp connections upon chip reset
  [SCSI] cxgb3i: re-read ddp settings information after chip reset
  [SCSI] cxgb3i: re-initialize ddp settings after chip reset
  [SCSI] cxgb3i: subscribe to error notification from cxgb3 driver
  [SCSI] aacraid driver update
  [SCSI] mptsas: remove unneeded check
  [SCSI] config: Make need for SCSI_CDROM clearer
  ...
2009-04-06 13:24:49 -07:00
Michael Chan
57579f7629 bnx2: Use request_firmware()
Based on original patch by Ben Hutchings <ben@decadent.org.uk> and
Bastian Blank <waldi@debian.org>, with the following main changes:

Separated the mips firmware and rv2p firmware into different files
to make it easier to update them separately.

Added some code to fixup the rv2p code with run-time information
such as PAGE_SIZE.

Update version to 2.0.0.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-04 16:51:14 -07:00
Jaswinder Singh Rajput
cd36e9efaa myri_sbus: use request_firmware
Firmware blob looks like this...

        __be16 lanai4_data_size
        unsigned char lanai4_code[]

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-04 16:38:42 -07:00
Mithlesh Thukral
cda3b517a4 Staging: sxg: Add support to download the firmware using request_firmware()
Add support for downloading the firmware using kernel-builtin mechanism.
This will remove the need for the firmware files in the driver source code.

Signed-off-by: Christopher Harrer <charrer@alacritech.com>
Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-03 14:53:14 -07:00
Lior Dotan
a390c47939 Staging: slicoss: add binary firmware to firmware directory
Adds the firmware to the firmware directory in ihex format so it can be
installed when doing make firmware_install.

Also update the firmware location in the driver code so it can locate
the files in the right place.

This should conclude the move to request_firmware().

Signed-off-by: Lior Dotan <liodot@gmail.com>
Cc: Christopher Harrer <charrer@alacritech.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-03 14:53:05 -07:00
Jaswinder Singh Rajput
f894e74dc1 [SCSI] qlogicpti: use request_firmware
Firmware blob is little endian

Thanks to Stephen Rothwell for fixing typos

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-04-03 09:25:23 -05:00
Jaswinder Singh Rajput
989bb5f58c [SCSI] advansys: use request_firmware
Firmware blob looks like this...
        __le32 checksum
        unsigned char data[]

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-04-03 09:25:23 -05:00
Jaswinder Singh Rajput
1bfa11db71 [SCSI] qla1280: use request_firmware
Firmware blob is little endian looks like this...
        unsigned char  Version1
        unsigned char  Version2
        unsigned char  Version3
        unsigned char  Padding
        unsigned short start_address
	unsigned short data

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-04-03 09:24:42 -05:00
Jaswinder Singh Rajput
75bf758f90 smc91c92_cs: use request_firmware
Added osi_load_firmware() instead of copying same thing twice

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
2009-03-30 20:25:13 +05:30
Jaswinder Singh Rajput
4b6ece97e0 3C359: use request_firmware
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
2009-03-30 20:02:50 +05:30
Jaswinder Singh Rajput
a7a5eb9d4e yam: use request_firmware
Added predef variable in add_mcs() to support predefined mcs data

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
2009-03-30 19:27:07 +05:30
Divy Le Ray
d9507a532a cxgb3: update FW
Update FW to 7.1

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-13 11:30:48 -07:00
Ben Hutchings
b775a750c3 typhoon: Use request_firmware()
Based on a patch by Jaswinder Singh <jaswinder@infradead.org>.

Compile-tested only.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-26 23:21:23 -08:00
Ben Hutchings
06e1f9ffa0 tehuti: Use request_firmware()
Firmware blob is little endian.

Compile-tested only.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-26 23:20:56 -08:00
Chris Adams
7df5231660 ti_usb_3410_5052: add Multi-Tech firmware
Add the Multi-Tech cellular modem firmware to the TI USB serial driver.
This firmware was extracted from:

ftp://ftp.multitech.com/wireless/wireless_linux.zip

Firmware licence: "all firmware components are redistributable in binary
	form" per support@multitech.com
	Copyright (C) 2005 Multi-Tech Systems, Inc.

Signed-off-by: Chris Adams <cmadams@hiwaay.net>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-12 16:37:01 -08:00
David S. Miller
7f46b1343f Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6 2009-01-08 11:05:59 -08:00
Jaswinder Singh Rajput
9ac32e1bc0 firmware: convert e100 driver to request_firmware()
Thanks to David Woodhouse for help.

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-07 12:59:17 -08:00
Sam Ravnborg
8b249b6856 fix modules_install via NFS
Rafael reported:

I get the following error from 'make modules_install' on my test boxes:

  HOSTCC  firmware/ihex2fw
/home/rafael/src/linux-2.6/firmware/ihex2fw.c:268: fatal error: opening dependency file firmware/.ihex2fw.d: Read-only file system
compilation terminated.
make[3]: *** [firmware/ihex2fw] Error 1
make[2]: *** [_modinst_post] Error 2
make[1]: *** [sub-make] Error 2
make: *** [all] Error 2

where the configuration is that the kernel is compiled on a build box
with 'make O=<destdir> -j5' and then <destdir> is mounted over NFS read-only by
each test box (full path to this directory is the same on the build box and on
the test boxes).  Then, I cd into <destdir>, run 'make modules_install' and get
the error above.

The issue turns out to be that we when we install firmware pick
up the list of firmware blobs from firmware/Makefile.
And this triggers the Makefile rules to update ihex2fw.

There were two solutions for this issue:
1) Move the list of firmware blobs to a separate file
2) Avoid ihex2fw rebuild by moving it to scripts

As I seriously beleive that the list of firmware blobs should be
done in a fundamental different way solution 2) was selected.

Reported-and-tested-by: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: David Woodhouse <dwmw2@infradead.org>
2009-01-07 21:44:20 +01:00
Linus Torvalds
15b0669072 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (44 commits)
  qlge: Fix sparse warnings for tx ring indexes.
  qlge: Fix sparse warning regarding rx buffer queues.
  qlge: Fix sparse endian warning in ql_hw_csum_setup().
  qlge: Fix sparse endian warning for inbound packet control block flags.
  qlge: Fix sparse warnings for byte swapping in qlge_ethool.c
  myri10ge: print MAC and serial number on probe failure
  pkt_sched: cls_u32: Fix locking in u32_change()
  iucv: fix cpu hotplug
  af_iucv: Free iucv path/socket in path_pending callback
  af_iucv: avoid left over IUCV connections from failing connects
  af_iucv: New error return codes for connect()
  net/ehea: bitops work on unsigned longs
  Revert "net: Fix for initial link state in 2.6.28"
  tcp: Kill extraneous SPLICE_F_NONBLOCK checks.
  tcp: don't mask EOF and socket errors on nonblocking splice receive
  dccp: Integrate the TFRC library with DCCP
  dccp: Clean up ccid.c after integration of CCID plugins
  dccp: Lockless integration of CCID congestion-control plugins
  qeth: get rid of extra argument after printk to dev_* conversion
  qeth: No large send using EDDP for HiperSockets.
  ...
2009-01-05 18:44:59 -08:00
Jaswinder Singh Rajput
cfc3a44c3c starfire: use request_firmware()
Firmware blob is big endian

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-04 16:12:11 -08:00
Jaswinder Singh Rajput
077f849de4 firmware: convert tg3 driver to request_firmware()
Firmware blob looks like this...
        u8 firmware_major
        u8 firmware_minor
        u8 firmware_fix
        u8 pad
        __be32 start_address
        __be32 length (total, including BSS sections to be zeroed)
        data... (in __be32 words, which is native for the firmware)

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-04 16:11:25 -08:00
Jaswinder Singh
949b42544a firmware: convert acenic driver to request_firmware()
We store the firmware in its native big-endian form now, so the loop in
ace_copy() is modified to use be32_to_cpup() when writing it out.

We can forget the BSS,SBSS sections of the firmware, since we were
clearing all the device's RAM anyway. And the text,rodata,data sections
can all be loaded as a single chunk since they're contiguous (give or
take a few dozen bytes in between).

Signed-off-by: Jaswinder Singh <jaswinder@infradead.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Acked-by: Jes Sorensen <jes@sgi.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-04 16:10:02 -08:00
Igor M. Liplianin
4b29631db3 V4L/DVB (9533): cx88: Add support for TurboSight TBS8910 DVB-S PCI card
The card based on stv0299 or stv0288 demodulators.

Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29 17:53:28 -02:00
Divy Le Ray
ad58633c83 cxgb3: integrate FW and protocol engines in the kernel
Include firmware and protocol images in the kernel image if requested

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-26 15:37:50 -08:00
Jaswinder Singh
fcaa40669c cassini: use request_firmware
Firmware blob looks like this...
        __le16 load_address
        unsigned char data[]

[akpm@linux-foundation.org: include vmalloc.h]
Signed-off-by: Jaswinder Singh <jaswinder@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-22 19:27:10 -07:00
David Woodhouse
1cede1affb Fix modules_install on RO nfs-exported trees.
Fixes http://bugzilla.kernel.org/show_bug.cgi?id=11355 by avoiding a
needless rebuild of the firmware/ihex2fw tool.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-09-02 09:28:59 +01:00
David Woodhouse
d25dc7fd47 Fix 'make clean' and .gitignore for firmware/ directory.
Provide a .gitignore file, and fix a typo which prevented some of the
generated binary files from being removed on 'make clean'.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Reported-and-tested-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-16 07:34:18 -07:00
David Woodhouse
ad1f8bf073 Fix accidental reference to tg3 firmware
We're not updating the tg3 driver to use request_firmware() yet, but a
reference to its firmware accidentally slipped in as part of commit
c4667746 ("dabusb: use request_firmware()"). Remove it again.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Reported-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-14 20:40:39 -07:00
David Woodhouse
50515af207 firmware: Correct dependency on CONFIG_EXTRA_FIRMWARE_DIR
When CONFIG_EXTRA_FIRMWARE_DIR gets changed, the filename in the .S file
(which uses .incbin to include the binary) needs to change. When we
renamed the BUILTIN_FIRMWARE_DIR option to EXTRA_FIRMWARE_DIR, we forgot
to update the manual dependency in firmware/Makefile, so it was
depending on a non-existent file in include/config/

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-14 18:04:55 -07:00
Jaswinder Singh
d71792ac3d firmware: convert sb16_csp driver to use firmware loader exclusively
Signed-off-by: Jaswinder Singh <jaswinder@infradead.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-07-14 14:45:46 -07:00
Jaswinder Singh
7f127d5ed0 dsp56k: use request_firmware
Signed-off-by: Jaswinder Singh <jaswinder@infradead.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-07-14 14:45:32 -07:00
Jaswinder Singh
d12b219a22 edgeport-ti: use request_firmware()
Firmware blob looks like this...
        uint8_t  MajorVersion
        uint8_t  MinorVersion
        __le16   BuildNumber
        uint8_t  data[]

Signed-off-by: Jaswinder Singh <jaswinder@infradead.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-07-14 14:44:39 -07:00
Jaswinder Singh
5b9ea93226 edgeport: use request_firmware()
Version number provided in first HEX record.

Signed-off-by: Jaswinder Singh <jaswinder@infradead.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-07-14 14:44:37 -07:00
Jaswinder Singh
fb54be8755 vicam: use request_firmware()
Although it wasn't actually using ihex records before, we use the Intel
HEX record format for this firmware -- because that gives us a simple
way to split it into separate chunks internally as we need, without
loading each part as a separate file.

Signed-off-by: Jaswinder Singh <jaswinder@infradead.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-07-14 14:44:32 -07:00
David Woodhouse
c466774636 dabusb: use request_firmware()
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-07-14 14:44:21 -07:00
David Woodhouse
04a33e406a cpia2: use request_firmware()
Thanks for Jaswinder Singh for converting the firmware blob itself to ihex.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-07-14 14:43:28 -07:00
David Woodhouse
547d8bb7dd ip2: use request_firmware()
Converted with help from Jaswinder Singh

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Acked-by: Alan Cox <alan@redhat.com>
2008-07-10 14:49:41 +01:00
David Woodhouse
27d202fff1 firmware: convert Ambassador ATM driver to request_firmware()
Since it had various regions to be loaded to separate addresses, and it
wanted to do them in fairly small chunks anyway, switch it to use the
new ihex code. Encode the start address in the first record.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Acked-by: Chas Williams <chas@cmf.nrl.navy.mil>
2008-07-10 14:49:39 +01:00
David Woodhouse
ec6752f5af whiteheat: use request_firmware()
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-07-10 14:49:38 +01:00