The configure_channels() function has a double free because
configure_memdma_and_inputblock() calls free_input_block() and then
it's called again in the error handling code.
Link: https://lore.kernel.org/linux-media/20211208073544.GA22020@kili
Fixes: c5f5d0f997 ("[media] c8sectpfe: STiH407/10 Linux DVB demux support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The return value of dma_set_coherent_mask() is not always 0.
To catch the exception in case that dma is not support the mask.
Link: https://lore.kernel.org/linux-media/20211206022201.1639460-1-jiasheng@iscas.ac.cn
Fixes: b0444f18e0 ("[media] coda: add i.MX6 VDOA driver")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Pointer common is being assigned a value in a for-loop and the pointer
is never read afterwards. The assignment is redundant and can be removed.
Link: https://lore.kernel.org/linux-media/20211205002242.202769-1-colin.i.king@gmail.com
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
While testing Rockchip RK3399 with both ISPs enabled, a dmesg error
was observed:
```
[ 15.559141] debugfs: Directory 'rkisp1' with parent '/' already present!
```
Fix it by using the device name for the debugfs subdirectory name
instead of the driver name, thus preventing name collision.
Link: https://lore.kernel.org/linux-media/20211010175457.438627-1-mike.rudenko@gmail.com
Signed-off-by: Mikhail Rudenko <mike.rudenko@gmail.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
In many places the bytesused field of struct vb2_buffer is set
directly. Replace that with the function call
vb2_set_plane_payload
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The only usage of the v4l2_m2m_ops structs is to pass their address to
v4l2_m2m_init() which takes a pointer to const struct v4l2_m2m_ops as
argument. Make them const to allow the compiler to put them in read-only
memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
There is no need to hold the group lock when unregistering the notifier,
but doing so triggers a warning about a possible cyclic lock dependency.
The lock warning cover the case where a subdevice is about to be bound
to the notifier at the same time as it's unregistered. The locking for
this scenario is handled in the v4l2-async framework so it's safe to
remove the lock in the driver. This match the locking logic in the
driver for when the notifier in question is registered.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The VIN driver have an internal concept of capture groups that covers
multiple instances of the driver. This is handled using the shared media
graph and a single notifier shared between all VIN instances.
This design do not work well if an individual VIN where to be unbound on
its own. The design could be improved up on to allow for this but would
require large changes in the v4l2-async framework. To avoid the
situation suppress the bind and unbind nodes in sysfs.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The v4l2-async framework's subdev notifiers do not behave correctly if a
device in the middle of the pipeline is unbound and then rebound. The
v4l2-subdevices upstream from the device being rebound gets confused as
they receive no notification of the device unbound and can't cleanup
their state and when they are rebound to the new v4l2-subdev notifier
they try to reinitialize their internal state, this may include things
as trying to create links that already exists and in some cases crash
the system, for example the adv748x.
This should be solved in the v4l2-async framework, but as a stop-gap
measure suppress the bind and unbind sysfs nodes for the rcar-csi2
driver so it can't be used to crash the system.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This change fixes two issues with the size constraints for buffers.
- There is no width alignment constraint for RGB formats. Prior to this
change they were treated as YUV and as a result were more restricted
than needed. Add a new check to differentiate between the two.
- The minimum width and height supported is 5x2, not 2x4, this is an
artifact from the driver's soc-camera days. Fix this incorrect
assumption.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Before reading which slot was captured to by examining the module status
(VnMS) register, make sure something was captured at all by examining
the interrupt status register (VnINTS).
Failing this a buffer maybe completed before it was captured too.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
A successful 'of_platform_populate()' call should be balanced by a
corresponding 'of_platform_depopulate()' call in the error handling path
of the probe, as already done in the remove function.
A successful 'venus_firmware_init()' call should be balanced by a
corresponding 'venus_firmware_deinit()' call in the error handling path
of the probe, as already done in the remove function.
Update the error handling path accordingly.
Fixes: f9799fcce4 ("media: venus: firmware: register separate platform_device for firmware loader")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The normal path of the function makes the assumption that
'pm_ops->core_power' may be NULL.
We should make the same assumption in the error handling path or a NULL
pointer dereference may occur.
Add the missing test before calling 'pm_ops->core_power'
Fixes: 9e8efdb578 ("media: venus: core: vote for video-mem path")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
In exististing implimentation, in min_loaded_core() for low_power
vpp frequency value is considering as vpp_freq instead of low_power_freq.
Fixed this by correcting vpp frequency calculation for encoder.
Fixes: 3cfe5815ce (media: venus: Enable low power setting for encoder)
Signed-off-by: Mansur Alisha Shaik <mansur@codeaurora.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add missing documentation for two field. This fixes these kernel-doc
warnings:
drivers/media/platform/omap3isp/omap3isp.h:107: warning: Function parameter or member 'vp_clk_pol' not described in 'isp_ccp2_cfg'
drivers/media/platform/omap3isp/omap3isp.h:107: warning: Function parameter or member 'lanecfg' not described in 'isp_ccp2_cfg'
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Stop the CODA960 JPEG encoder from overflowing capture buffers.
The bitstream buffer overflow interrupt doesn't seem to be connected,
so this has to be handled via timeout instead.
Reported-by: Martin Weber <martin.weber@br-automation.com>
Fixes: 96f6f62c46 ("media: coda: jpeg: add CODA960 JPEG encoder support")
Tested-by: Martin Weber <martin.weber@br-automation.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The function mtk_venc_get_q_data always returns a reference
so there is no need to check if the return value is null.
In addition move the q_data initialization to the declaration
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The function vidioc_try_fmt has a big 'if-else' for
the capture and output cases. There is hardly any code
outside of that condition. It is therefore better to split
that functions into two different functions, one for each case.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The mtk-vcodec uses some internal defined debug formats for
printing. This patch fixes some things in those defines:
1. use the 'pr_fmt' define to print function name and line.
2. remove 'if(DEBUG)' condition for the defines. This condition
prevents the debugs from being shown in case of dynamic debugs.
Instead replace 'pr_info' with 'pr_debug'
3. remove module parameters that enable/disable debug.
There is no reason for the driver to have those params. Having
those params require the user to explicitly set them when user
wants to see debug prints instead of using the global debugs
setting as expected by drivers to conform.
In addition to that, fix some warnings about debug formatting
[hverkuil: used %zu instead of %lu for sizeof() arguments]
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The print function dev_err() is redundant because
platform_get_irq() already prints an error.
Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
In case of error the 'media_device_init()' call is not balanced by a
corresponding 'media_device_cleanup()' call.
Add it, when needed, as already done in the remove function.
Fixes: 118add98f8 ("media: mtk-vcodec: vdec: add media device if using stateless api")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Tzung-Bi Shih <tzungbi@google.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
In the function fdp1_probe(), when get irq failed, the
function platform_get_irq() log an error message, so
remove redundant message here. And the variable type
of "ret" is int, the "fdp1->irq" is unsigned int, when
irq failed, this place maybe wrong, thus fix it.
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
In the error handling of s3c_camif_probe, s3c_camif_unregister_subdev
may be executed twice, one is from camif_unregister_media_entities.
Although there is sanity check about the registration status,
it is not good to call s3c_camif_unregister_subdev twice in the error
handling code.
Fix this by moving s3c_camif_unregister_subdev out of
camif_unregister_media_entities, and add a s3c_camif_unregister_subdev
in the s3c_camif_remove.
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
In the error handling code of bdisp_probe, it fails to invoke
pm_runtime_disable in many error sites.
Fix this by adding pm_runtime_disable at the label err_remove.
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
In the error handling code of hva_hw_probe, it fails to invoke
pm_runtime_disable in many error sites.
Fix this by adding a label err_disable with pm_runtime_disable and
adjust one goto from label err_clk to err_disable.
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
PXP allows clockwise rotation of 0°, 90°, 180° and 270°.
Add support for it.
Tested on a imx6ull-evk.
For example, to rotate 90° the following Gstreamer pipeline can
be used:
gst-launch-1.0 videotestsrc ! video/x-raw,width=640,height=480 ! \
v4l2convert extra-controls=cid,rotate=90 ! \
video/x-raw,width=120,height=160 ! fbdevsink
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
After devm_request_threaded_irq() is called there is a chance that an
interrupt may occur before the spinlock is initialized, which will trigger
a kernel oops.
To prevent that, move the initialization of the spinlock prior to
requesting the interrupts.
Fixes: 51abcf7fdb ("media: imx-pxp: add i.MX Pixel Pipeline driver")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
PHTW register is selected based on default bit rate from Table[1].
for the bit rates less than or equal to 250. Currently first
value of default bit rate which is greater than or equal to
the caculated mbps is selected. This selection can be further
improved by selecting the default bit rate which is nearest to
the calculated value.
[1] specs r19uh0105ej0200-r-car-3rd-generation.pdf [Table 25.12]
Fixes: 769afd212b ("media: rcar-csi2: add Renesas R-Car MIPI CSI-2 receiver driver")
Signed-off-by: Suresh Udipi <sudipi@jp.adit-jv.com>
Signed-off-by: Michael Rodin <mrodin@de.adit-jv.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add a warning message when the selected PHY speed is less
than supported minimum PHY speed given in the hsfreq table[1].
For raspberry pi camera capture on Kingfisher board with resolution
640x480, the calculated PHY speed is 48 mbps which is less than
the minimum PHY speed 80 Mbps from the table[1]. But in this cases
capture is successful.
[1] specs r19uh0105ej0200-r-car-3rd-generation.pdf [Table 25.9]
Signed-off-by: Suresh Udipi <sudipi@jp.adit-jv.com>
Signed-off-by: Michael Rodin <mrodin@de.adit-jv.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
hsfreqrange should be chosen based on the calculated mbps which
is closer to the default bit rate and within the range as per
table[1]. But current calculation always selects first value which
is greater than or equal to the calculated mbps which may lead
to chosing a wrong range in some cases.
For example for 360 mbps for H3/M3N
Existing logic selects
Calculated value 360Mbps : Default 400Mbps Range [368.125 -433.125 mbps]
This hsfreqrange is out of range.
The logic is changed to get the default value which is closest to the
calculated value [1]
Calculated value 360Mbps : Default 350Mbps Range [320.625 -380.625 mpbs]
[1] specs r19uh0105ej0200-r-car-3rd-generation.pdf [Table 25.9]
Please note that According to Renesas in Table 25.9 the range for
220 default value is corrected as below
|Range (Mbps) | Default Bit rate (Mbps) |
-----------------------------------------------
| 197.125-244.125 | 220 |
-----------------------------------------------
Fixes: 769afd212b ("media: rcar-csi2: add Renesas R-Car MIPI CSI-2 receiver driver")
Signed-off-by: Suresh Udipi <sudipi@jp.adit-jv.com>
Signed-off-by: Kazuyoshi Akiyama <akiyama@nds-osk.co.jp>
Signed-off-by: Michael Rodin <mrodin@de.adit-jv.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The typecasts at the dvb-core generate clang warnings when W=1
is enabled.
Such warning is harmless, but it causes the build to break with
CONFIG_WERROR and W=1 with clang, so do the cast on a way that
it won't produce warnings anymore.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
vfe_reg_clr() is not used in camss-vfe-170.c, and can be removed.
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Such function is currently unused, but could be needed in the
future. So, keep it, marking it as __always_unused, in order to
avoid a clang W=1 error.
Reviewed-by: Lad Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
vpif_get_default_field() seems to be some left-over from a
past code that sets the field order.
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Lad Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Clang with W=1 produces the following warnings:
drivers/media/platform/omap3isp/isph3a_af.c:173:6: error: result of comparison of constant 256 with expression of type '__u8' (aka 'unsigned char') is always false [-Werror,-Wtautological-constant-out-of-range-compare]
if (IS_OUT_OF_BOUNDS(paxel_cfg->height, OMAP3ISP_AF_PAXEL_HEIGHT_MIN,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/media/platform/omap3isp/isph3a_af.c:24:33: note: expanded from macro 'IS_OUT_OF_BOUNDS'
(((value) < (min)) || ((value) > (max)))
~~~~~~~ ^ ~~~~~
drivers/media/platform/omap3isp/isph3a_af.c:179:6: error: result of comparison of constant 256 with expression of type '__u8' (aka 'unsigned char') is always false [-Werror,-Wtautological-constant-out-of-range-compare]
if (IS_OUT_OF_BOUNDS(paxel_cfg->width, OMAP3ISP_AF_PAXEL_WIDTH_MIN,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/media/platform/omap3isp/isph3a_af.c:24:33: note: expanded from macro 'IS_OUT_OF_BOUNDS'
(((value) < (min)) || ((value) > (max)))
~~~~~~~ ^ ~~~~~
2 errors generated.
Use a typecast to avoid such warnings.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This function is only used for debugging purposes. When DEBUG
is disabled, it becomes unused, causing a clang warning with W=1.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This function is an alias for container_of() that it is currently
not used, causing clang warnings. So, drop it.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
support greyscale pix fmt input for coda9_jpeg_encoder. The hardware
supports it, so allow V4L2 Mem2Mem JPEG Encoder use it as well. Tested
on an i.MX6QP.
[hverkuil: updated the Subject line as suggested by Philipp]
Signed-off-by: Martin Weber <martin.weber@br-automation.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The driver already has logic to detect if it fails to stop properly and
report this error to the user. The driver however did not report the
unused buffers or buffers given to the hardware (if any) with an error,
the buffers where instead returned to user-space in the active state.
Build on the existing detection of the error condition and correctly
return the buffers with an error if it triggers.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The prarameter bs_size to function vpu_enc_encode
is not used. Remove it.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
In order for the encoder to work with gstreamer
it needs to have the V4L2_CID_MPEG_VIDEO_VP8_PROFILE
ctrl. This patch adds that ctrl with only profile 0
supported.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Acked-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
'destroy_workqueue()' already drains the queue before destroying it, so
there is no need to flush it explicitly.
Remove the redundant 'flush_workqueue()' calls.
This was generated with coccinelle:
@@
expression E;
@@
- flush_workqueue(E);
destroy_workqueue(E);
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
'destroy_workqueue()' already drains the queue before destroying it, so
there is no need to flush it explicitly.
Remove the redundant 'flush_workqueue()' calls.
This was generated with coccinelle:
@@
expression E;
@@
- flush_workqueue(E);
destroy_workqueue(E);
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
A clang-analyzer warning was reported.
>> drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_stateless.c:133:18:
warning: Value stored to 'pfb' during its initialization is never
read [clang-analyzer-deadcode.DeadStores]
struct vdec_fb *pfb = &framebuf->frame_buffer;
^~~ ~~~~~~~~~~~~~~~~~~~~~~~
Removes the redundant 'pfb' assignment to fix.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
get compile-test failed report from lkp@intel.com after the driver
submitted.
"ld.lld: error: undefined symbol: v4l2_fh_init"
so, make CONFIG_STM32_DMA2D depends on CONFIG_VIDEO_DEV and
CONFIG_VIDEO_V4L2 to fix this compile error.
Fixes: bff6e3e2f4c9 ("media: stm32-dma2d: STM32 DMA2D driver")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Dillon Min <dillon.minfei@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
If res-chg, VE_INTERRUPT_MODE_DETECT_WD irq will be raised. But
v4l2_input_status won't be updated to no-signal immediately until
aspeed_video_get_resolution() in aspeed_video_resolution_work().
During the period of time, aspeed_video_start_frame() could be called
because it doesn't know signal becomes unstable now. If it goes with
aspeed_video_init_regs() of aspeed_video_irq_res_change()
simultaneously, it will mess up hw state.
To fix this problem, v4l2_input_status is updated to no-signal
immediately for VE_INTERRUPT_MODE_DETECT_WD irq.
Fixes: d2b4387f3b ("media: platform: Add Aspeed Video Engine driver")
Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com>
Acked-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
